Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 939 insertions, 0 deletions

diff --git a/drivers/net/at1700.c b/drivers/net/at1700.c
new file mode 100644
index 000000000000..b8ab2b6355eb
--- /dev/null
+++ b/drivers/net/at1700.c
@@ -0,0 +1,939 @@
+/* at1700.c: A network device driver for  the Allied Telesis AT1700.
+
+	Written 1993-98 by Donald Becker.
+
+	Copyright 1993 United States Government as represented by the
+	Director, National Security Agency.
+
+	This software may be used and distributed according to the terms
+	of the GNU General Public License, incorporated herein by reference.
+
+	The author may be reached as becker@scyld.com, or C/O
+	Scyld Computing Corporation
+	410 Severn Ave., Suite 210
+	Annapolis MD 21403
+
+	This is a device driver for the Allied Telesis AT1700, and
+        Fujitsu FMV-181/182/181A/182A/183/184/183A/184A, which are
+	straight-forward Fujitsu MB86965 implementations.
+
+	Modification for Fujitsu FMV-18X cards is done by Yutaka Tamiya
+	(tamy@flab.fujitsu.co.jp). 
+
+  Sources:
+    The Fujitsu MB86965 datasheet.
+
+	After the initial version of this driver was written Gerry Sawkins of
+	ATI provided their EEPROM configuration code header file.
+    Thanks to NIIBE Yutaka <gniibe@mri.co.jp> for bug fixes.
+
+    MCA bus (AT1720) support by Rene Schmit <rene@bss.lu>
+
+  Bugs:
+	The MB86965 has a design flaw that makes all probes unreliable.  Not
+	only is it difficult to detect, it also moves around in I/O space in
+	response to inb()s from other device probes!
+*/
+/*
+	99/03/03  Allied Telesis RE1000 Plus support by T.Hagawa
+	99/12/30	port to 2.3.35 by K.Takai
+*/
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/mca-legacy.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/crc32.h>
+#include <linux/bitops.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+
+static char version[] __initdata =
+	"at1700.c:v1.15 4/7/98  Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
+
+#define DRV_NAME "at1700"
+
+/* Tunable parameters. */
+
+/* When to switch from the 64-entry multicast filter to Rx-all-multicast. */
+#define MC_FILTERBREAK 64
+
+/* These unusual address orders are used to verify the CONFIG register. */
+
+static int fmv18x_probe_list[] __initdata = {
+	0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x300, 0x340, 0
+};
+
+/*
+ *	ISA
+ */
+
+static unsigned at1700_probe_list[] __initdata = {
+	0x260, 0x280, 0x2a0, 0x240, 0x340, 0x320, 0x380, 0x300, 0
+};
+
+/*
+ *	MCA
+ */
+#ifdef CONFIG_MCA_LEGACY
+static int at1700_ioaddr_pattern[] __initdata = {
+	0x00, 0x04, 0x01, 0x05, 0x02, 0x06, 0x03, 0x07
+};
+
+static int at1700_mca_probe_list[] __initdata = {
+	0x400, 0x1400, 0x2400, 0x3400, 0x4400, 0x5400, 0x6400, 0x7400, 0
+};
+
+static int at1700_irq_pattern[] __initdata = {
+	0x00, 0x00, 0x00, 0x30, 0x70, 0xb0, 0x00, 0x00,
+	0x00, 0xf0, 0x34, 0x74, 0xb4, 0x00, 0x00, 0xf4, 0x00
+};
+#endif
+
+/* use 0 for production, 1 for verification, >2 for debug */
+#ifndef NET_DEBUG
+#define NET_DEBUG 1
+#endif
+static unsigned int net_debug = NET_DEBUG;
+
+typedef unsigned char uchar;
+
+/* Information that need to be kept for each board. */
+struct net_local {
+	struct net_device_stats stats;
+	spinlock_t lock;
+	unsigned char mc_filter[8];
+	uint jumpered:1;			/* Set iff the board has jumper config. */
+	uint tx_started:1;			/* Packets are on the Tx queue. */
+	uint tx_queue_ready:1;			/* Tx queue is ready to be sent. */
+	uint rx_started:1;			/* Packets are Rxing. */
+	uchar tx_queue;				/* Number of packet on the Tx queue. */
+	char mca_slot;				/* -1 means ISA */
+	ushort tx_queue_len;			/* Current length of the Tx queue. */
+};
+
+
+/* Offsets from the base address. */
+#define STATUS			0
+#define TX_STATUS		0
+#define RX_STATUS		1
+#define TX_INTR			2		/* Bit-mapped interrupt enable registers. */
+#define RX_INTR			3
+#define TX_MODE			4
+#define RX_MODE			5
+#define CONFIG_0		6		/* Misc. configuration settings. */
+#define CONFIG_1		7
+/* Run-time register bank 2 definitions. */
+#define DATAPORT		8		/* Word-wide DMA or programmed-I/O dataport. */
+#define TX_START		10
+#define COL16CNTL		11		/* Controll Reg for 16 collisions */
+#define MODE13			13
+#define RX_CTRL			14
+/* Configuration registers only on the '865A/B chips. */
+#define EEPROM_Ctrl 	16
+#define EEPROM_Data 	17
+#define CARDSTATUS	16			/* FMV-18x Card Status */
+#define CARDSTATUS1	17			/* FMV-18x Card Status */
+#define IOCONFIG		18		/* Either read the jumper, or move the I/O. */
+#define IOCONFIG1		19
+#define	SAPROM			20		/* The station address PROM, if no EEPROM. */
+#define MODE24			24
+#define RESET			31		/* Write to reset some parts of the chip. */
+#define AT1700_IO_EXTENT	32
+#define PORT_OFFSET(o) (o)
+
+
+#define TX_TIMEOUT		10
+
+
+/* Index to functions, as function prototypes. */
+
+static int at1700_probe1(struct net_device *dev, int ioaddr);
+static int read_eeprom(long ioaddr, int location);
+static int net_open(struct net_device *dev);
+static int	net_send_packet(struct sk_buff *skb, struct net_device *dev);
+static irqreturn_t net_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static void net_rx(struct net_device *dev);
+static int net_close(struct net_device *dev);
+static struct net_device_stats *net_get_stats(struct net_device *dev);
+static void set_rx_mode(struct net_device *dev);
+static void net_tx_timeout (struct net_device *dev);
+
+
+#ifdef CONFIG_MCA_LEGACY
+struct at1720_mca_adapters_struct {
+	char* name;
+	int id;
+};
+/* rEnE : maybe there are others I don't know off... */
+
+static struct at1720_mca_adapters_struct at1720_mca_adapters[] __initdata = {
+	{ "Allied Telesys AT1720AT",	0x6410 },
+	{ "Allied Telesys AT1720BT", 	0x6413 },
+	{ "Allied Telesys AT1720T",	0x6416 },
+	{ NULL, 0 },
+};
+#endif
+
+/* Check for a network adaptor of this type, and return '0' iff one exists.
+   If dev->base_addr == 0, probe all likely locations.
+   If dev->base_addr == 1, always return failure.
+   If dev->base_addr == 2, allocate space for the device and return success
+   (detachable devices only).
+   */
+
+static int io = 0x260;
+
+static int irq;
+
+static void cleanup_card(struct net_device *dev)
+{
+#ifdef CONFIG_MCA_LEGACY
+	struct net_local *lp = netdev_priv(dev);
+	if (lp->mca_slot >= 0)
+		mca_mark_as_unused(lp->mca_slot);
+#endif	
+	free_irq(dev->irq, NULL);
+	release_region(dev->base_addr, AT1700_IO_EXTENT);
+}
+
+struct net_device * __init at1700_probe(int unit)
+{
+	struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
+	unsigned *port;
+	int err = 0;
+
+	if (!dev)
+		return ERR_PTR(-ENODEV);
+
+	if (unit >= 0) {
+		sprintf(dev->name, "eth%d", unit);
+		netdev_boot_setup_check(dev);
+		io = dev->base_addr;
+		irq = dev->irq;
+	} else {
+		dev->base_addr = io;
+		dev->irq = irq;
+	}
+
+	SET_MODULE_OWNER(dev);
+
+	if (io > 0x1ff) {	/* Check a single specified location. */
+		err = at1700_probe1(dev, io);
+	} else if (io != 0) {	/* Don't probe at all. */
+		err = -ENXIO;
+	} else {
+		for (port = at1700_probe_list; *port; port++) {
+			if (at1700_probe1(dev, *port) == 0)
+				break;
+			dev->irq = irq;
+		}
+		if (!*port)
+			err = -ENODEV;
+	}
+	if (err)
+		goto out;
+	err = register_netdev(dev);
+	if (err)
+		goto out1;
+	return dev;
+out1:
+	cleanup_card(dev);
+out:
+	free_netdev(dev);
+	return ERR_PTR(err);
+}
+
+/* The Fujitsu datasheet suggests that the NIC be probed for by checking its
+   "signature", the default bit pattern after a reset.  This *doesn't* work --
+   there is no way to reset the bus interface without a complete power-cycle!
+
+   It turns out that ATI came to the same conclusion I did: the only thing
+   that can be done is checking a few bits and then diving right into an
+   EEPROM read. */
+
+static int __init at1700_probe1(struct net_device *dev, int ioaddr)
+{
+	char fmv_irqmap[4] = {3, 7, 10, 15};
+	char fmv_irqmap_pnp[8] = {3, 4, 5, 7, 9, 10, 11, 15};
+	char at1700_irqmap[8] = {3, 4, 5, 9, 10, 11, 14, 15};
+	unsigned int i, irq, is_fmv18x = 0, is_at1700 = 0;
+	int slot, ret = -ENODEV;
+	struct net_local *lp = netdev_priv(dev);
+
+	if (!request_region(ioaddr, AT1700_IO_EXTENT, DRV_NAME))
+		return -EBUSY;
+
+	/* Resetting the chip doesn't reset the ISA interface, so don't bother.
+	   That means we have to be careful with the register values we probe
+	   for.
+	 */
+#ifdef notdef
+	printk("at1700 probe at %#x, eeprom is %4.4x %4.4x %4.4x ctrl %4.4x.\n",
+		   ioaddr, read_eeprom(ioaddr, 4), read_eeprom(ioaddr, 5),
+		   read_eeprom(ioaddr, 6), inw(ioaddr + EEPROM_Ctrl));
+#endif
+
+#ifdef CONFIG_MCA_LEGACY
+	/* rEnE (rene@bss.lu): got this from 3c509 driver source , adapted for AT1720 */
+
+    /* Based on Erik Nygren's (nygren@mit.edu) 3c529 patch, heavily
+	modified by Chris Beauregard (cpbeaure@csclub.uwaterloo.ca)
+	to support standard MCA probing. */
+
+	/* redone for multi-card detection by ZP Gu (zpg@castle.net) */
+	/* now works as a module */
+
+	if (MCA_bus) {
+		int j;
+		int l_i;
+		u_char pos3, pos4;
+
+		for (j = 0; at1720_mca_adapters[j].name != NULL; j ++) {
+			slot = 0;
+			while (slot != MCA_NOTFOUND) {
+				
+				slot = mca_find_unused_adapter( at1720_mca_adapters[j].id, slot );
+				if (slot == MCA_NOTFOUND) break;
+
+				/* if we get this far, an adapter has been detected and is
+				enabled */
+
+				pos3 = mca_read_stored_pos( slot, 3 );
+				pos4 = mca_read_stored_pos( slot, 4 );
+
+				for (l_i = 0; l_i < 0x09; l_i++)
+					if (( pos3 & 0x07) == at1700_ioaddr_pattern[l_i])
+						break;
+				ioaddr = at1700_mca_probe_list[l_i];
+				
+				for (irq = 0; irq < 0x10; irq++)
+					if (((((pos4>>4) & 0x0f) | (pos3 & 0xf0)) & 0xff) == at1700_irq_pattern[irq])
+						break;
+
+					/* probing for a card at a particular IO/IRQ */
+				if ((dev->irq && dev->irq != irq) ||
+				    (dev->base_addr && dev->base_addr != ioaddr)) {
+				  	slot++;		/* probing next slot */
+				  	continue;
+				}
+
+				dev->irq = irq;
+				
+				/* claim the slot */
+				mca_set_adapter_name( slot, at1720_mca_adapters[j].name );
+				mca_mark_as_used(slot);
+
+				goto found;
+			}
+		}
+		/* if we get here, we didn't find an MCA adapter - try ISA */
+	}
+#endif
+	slot = -1;
+	/* We must check for the EEPROM-config boards first, else accessing
+	   IOCONFIG0 will move the board! */
+	if (at1700_probe_list[inb(ioaddr + IOCONFIG1) & 0x07] == ioaddr
+		&& read_eeprom(ioaddr, 4) == 0x0000
+		&& (read_eeprom(ioaddr, 5) & 0xff00) == 0xF400)
+		is_at1700 = 1;
+	else if (inb(ioaddr   + SAPROM    ) == 0x00
+		&& inb(ioaddr + SAPROM + 1) == 0x00
+		&& inb(ioaddr + SAPROM + 2) == 0x0e)
+		is_fmv18x = 1;
+	else {
+		goto err_out;
+	}
+			
+#ifdef CONFIG_MCA_LEGACY
+found:
+#endif
+
+		/* Reset the internal state machines. */
+	outb(0, ioaddr + RESET);
+
+	if (is_at1700) {
+		irq = at1700_irqmap[(read_eeprom(ioaddr, 12)&0x04)
+						   | (read_eeprom(ioaddr, 0)>>14)];
+	} else {
+		/* Check PnP mode for FMV-183/184/183A/184A. */
+		/* This PnP routine is very poor. IO and IRQ should be known. */
+		if (inb(ioaddr + CARDSTATUS1) & 0x20) {
+			irq = dev->irq;
+			for (i = 0; i < 8; i++) {
+				if (irq == fmv_irqmap_pnp[i])
+					break;
+			}
+			if (i == 8) {
+				goto err_mca;
+			}
+		} else {
+			if (fmv18x_probe_list[inb(ioaddr + IOCONFIG) & 0x07] != ioaddr)
+				goto err_mca;
+			irq = fmv_irqmap[(inb(ioaddr + IOCONFIG)>>6) & 0x03];
+		}
+	}
+
+	printk("%s: %s found at %#3x, IRQ %d, address ", dev->name,
+		   is_at1700 ? "AT1700" : "FMV-18X", ioaddr, irq);
+
+	dev->base_addr = ioaddr;
+	dev->irq = irq;
+
+	if (is_at1700) {
+		for(i = 0; i < 3; i++) {
+			unsigned short eeprom_val = read_eeprom(ioaddr, 4+i);
+			printk("%04x", eeprom_val);
+			((unsigned short *)dev->dev_addr)[i] = ntohs(eeprom_val);
+		}
+	} else {
+		for(i = 0; i < 6; i++) {
+			unsigned char val = inb(ioaddr + SAPROM + i);
+			printk("%02x", val);
+			dev->dev_addr[i] = val;
+		}
+	}
+
+	/* The EEPROM word 12 bit 0x0400 means use regular 100 ohm 10baseT signals,
+	   rather than 150 ohm shielded twisted pair compensation.
+	   0x0000 == auto-sense the interface
+	   0x0800 == use TP interface
+	   0x1800 == use coax interface
+	   */
+	{
+		const char *porttype[] = {"auto-sense", "10baseT", "auto-sense", "10base2"};
+		if (is_at1700) {
+			ushort setup_value = read_eeprom(ioaddr, 12);
+			dev->if_port = setup_value >> 8;
+		} else {
+			ushort setup_value = inb(ioaddr + CARDSTATUS);
+			switch (setup_value & 0x07) {
+			case 0x01: /* 10base5 */
+			case 0x02: /* 10base2 */
+				dev->if_port = 0x18; break;
+			case 0x04: /* 10baseT */
+				dev->if_port = 0x08; break;
+			default:   /* auto-sense */
+				dev->if_port = 0x00; break;
+			}
+		}
+		printk(" %s interface.\n", porttype[(dev->if_port>>3) & 3]);
+	}
+
+	/* Set the configuration register 0 to 32K 100ns. byte-wide memory, 16 bit
+	   bus access, two 4K Tx queues, and disabled Tx and Rx. */
+	outb(0xda, ioaddr + CONFIG_0);
+
+	/* Set the station address in bank zero. */
+	outb(0x00, ioaddr + CONFIG_1);
+	for (i = 0; i < 6; i++)
+		outb(dev->dev_addr[i], ioaddr + PORT_OFFSET(8 + i));
+
+	/* Switch to bank 1 and set the multicast table to accept none. */
+	outb(0x04, ioaddr + CONFIG_1);
+	for (i = 0; i < 8; i++)
+		outb(0x00, ioaddr + PORT_OFFSET(8 + i));
+
+
+	/* Switch to bank 2 */
+	/* Lock our I/O address, and set manual processing mode for 16 collisions. */
+	outb(0x08, ioaddr + CONFIG_1);
+	outb(dev->if_port, ioaddr + MODE13);
+	outb(0x00, ioaddr + COL16CNTL);
+
+	if (net_debug)
+		printk(version);
+
+	memset(lp, 0, sizeof(struct net_local));
+
+	dev->open		= net_open;
+	dev->stop		= net_close;
+	dev->hard_start_xmit = net_send_packet;
+	dev->get_stats	= net_get_stats;
+	dev->set_multicast_list = &set_rx_mode;
+	dev->tx_timeout = net_tx_timeout;
+	dev->watchdog_timeo = TX_TIMEOUT;
+
+	spin_lock_init(&lp->lock);
+
+	lp->jumpered = is_fmv18x;
+	lp->mca_slot = slot;
+	/* Snarf the interrupt vector now. */
+	ret = request_irq(irq, &net_interrupt, 0, DRV_NAME, dev);
+	if (ret) {
+		printk ("  AT1700 at %#3x is unusable due to a conflict on"
+				"IRQ %d.\n", ioaddr, irq);
+		goto err_mca;
+	}
+
+	return 0;
+
+err_mca:
+#ifdef CONFIG_MCA_LEGACY
+	if (slot >= 0)
+		mca_mark_as_unused(slot);
+#endif
+err_out:
+	release_region(ioaddr, AT1700_IO_EXTENT);
+	return ret;
+}
+
+
+/*  EEPROM_Ctrl bits. */
+#define EE_SHIFT_CLK	0x40	/* EEPROM shift clock, in reg. 16. */
+#define EE_CS			0x20	/* EEPROM chip select, in reg. 16. */
+#define EE_DATA_WRITE	0x80	/* EEPROM chip data in, in reg. 17. */
+#define EE_DATA_READ	0x80	/* EEPROM chip data out, in reg. 17. */
+
+/* The EEPROM commands include the alway-set leading bit. */
+#define EE_WRITE_CMD	(5 << 6)
+#define EE_READ_CMD		(6 << 6)
+#define EE_ERASE_CMD	(7 << 6)
+
+static int __init read_eeprom(long ioaddr, int location)
+{
+	int i;
+	unsigned short retval = 0;
+	long ee_addr = ioaddr + EEPROM_Ctrl;
+	long ee_daddr = ioaddr + EEPROM_Data;
+	int read_cmd = location | EE_READ_CMD;
+
+	/* Shift the read command bits out. */
+	for (i = 9; i >= 0; i--) {
+		short dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
+		outb(EE_CS, ee_addr);
+		outb(dataval, ee_daddr);
+		outb(EE_CS | EE_SHIFT_CLK, ee_addr);	/* EEPROM clock tick. */
+	}
+	outb(EE_DATA_WRITE, ee_daddr);
+	for (i = 16; i > 0; i--) {
+		outb(EE_CS, ee_addr);
+		outb(EE_CS | EE_SHIFT_CLK, ee_addr);
+		retval = (retval << 1) | ((inb(ee_daddr) & EE_DATA_READ) ? 1 : 0);
+	}
+
+	/* Terminate the EEPROM access. */
+	outb(EE_CS, ee_addr);
+	outb(EE_SHIFT_CLK, ee_addr);
+	outb(0, ee_addr);
+	return retval;
+}
+
+
+
+static int net_open(struct net_device *dev)
+{
+	struct net_local *lp = netdev_priv(dev);
+	int ioaddr = dev->base_addr;
+
+	/* Set the configuration register 0 to 32K 100ns. byte-wide memory, 16 bit
+	   bus access, and two 4K Tx queues. */
+	outb(0x5a, ioaddr + CONFIG_0);
+
+	/* Powerup, switch to register bank 2, and enable the Rx and Tx. */
+	outb(0xe8, ioaddr + CONFIG_1);
+
+	lp->tx_started = 0;
+	lp->tx_queue_ready = 1;
+	lp->rx_started = 0;
+	lp->tx_queue = 0;
+	lp->tx_queue_len = 0;
+
+	/* Turn on hardware Tx and Rx interrupts. */
+	outb(0x82, ioaddr + TX_INTR);
+	outb(0x81, ioaddr + RX_INTR);
+
+	/* Enable the IRQ on boards of fmv18x it is feasible. */
+	if (lp->jumpered) {
+		outb(0x80, ioaddr + IOCONFIG1);
+	}
+
+	netif_start_queue(dev);
+	return 0;
+}
+
+static void net_tx_timeout (struct net_device *dev)
+{
+	struct net_local *lp = netdev_priv(dev);
+	int ioaddr = dev->base_addr;
+
+	printk ("%s: transmit timed out with status %04x, %s?\n", dev->name,
+		inw (ioaddr + STATUS), inb (ioaddr + TX_STATUS) & 0x80
+		? "IRQ conflict" : "network cable problem");
+	printk ("%s: timeout registers: %04x %04x %04x %04x %04x %04x %04x %04x.\n",
+	 dev->name, inw(ioaddr + TX_STATUS), inw(ioaddr + TX_INTR), inw(ioaddr + TX_MODE),
+		inw(ioaddr + CONFIG_0), inw(ioaddr + DATAPORT), inw(ioaddr + TX_START),
+		inw(ioaddr + MODE13 - 1), inw(ioaddr + RX_CTRL));
+	lp->stats.tx_errors++;
+	/* ToDo: We should try to restart the adaptor... */
+	outw(0xffff, ioaddr + MODE24);
+	outw (0xffff, ioaddr + TX_STATUS);
+	outb (0x5a, ioaddr + CONFIG_0);
+	outb (0xe8, ioaddr + CONFIG_1);
+	outw (0x8182, ioaddr + TX_INTR);
+	outb (0x00, ioaddr + TX_START);
+	outb (0x03, ioaddr + COL16CNTL);
+
+	dev->trans_start = jiffies;
+
+	lp->tx_started = 0;
+	lp->tx_queue_ready = 1;
+	lp->rx_started = 0;
+	lp->tx_queue = 0;
+	lp->tx_queue_len = 0;
+
+	netif_wake_queue(dev);
+}
+
+
+static int net_send_packet (struct sk_buff *skb, struct net_device *dev)
+{
+	struct net_local *lp = netdev_priv(dev);
+	int ioaddr = dev->base_addr;
+	short length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
+	short len = skb->len;
+	unsigned char *buf = skb->data;
+	static u8 pad[ETH_ZLEN];
+
+	netif_stop_queue (dev);
+
+	/* We may not start transmitting unless we finish transferring
+	   a packet into the Tx queue. During executing the following
+	   codes we possibly catch a Tx interrupt. Thus we flag off
+	   tx_queue_ready, so that we prevent the interrupt routine
+	   (net_interrupt) to start transmitting. */
+	lp->tx_queue_ready = 0;
+	{
+		outw (length, ioaddr + DATAPORT);
+		/* Packet data */
+		outsw (ioaddr + DATAPORT, buf, len >> 1);
+		/* Check for dribble byte */
+		if (len & 1) {
+			outw(skb->data[skb->len-1], ioaddr + DATAPORT);
+			len++;
+		}
+		/* Check for packet padding */
+		if (length != skb->len)
+			outsw(ioaddr + DATAPORT, pad, (length - len + 1) >> 1);
+
+		lp->tx_queue++;
+		lp->tx_queue_len += length + 2;
+	}
+	lp->tx_queue_ready = 1;
+
+	if (lp->tx_started == 0) {
+		/* If the Tx is idle, always trigger a transmit. */
+		outb (0x80 | lp->tx_queue, ioaddr + TX_START);
+		lp->tx_queue = 0;
+		lp->tx_queue_len = 0;
+		dev->trans_start = jiffies;
+		lp->tx_started = 1;
+		netif_start_queue (dev);
+	} else if (lp->tx_queue_len < 4096 - 1502)
+		/* Yes, there is room for one more packet. */
+		netif_start_queue (dev);
+	dev_kfree_skb (skb);
+
+	return 0;
+}
+
+/* The typical workload of the driver:
+   Handle the network interface interrupts. */
+static irqreturn_t
+net_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct net_device *dev = dev_id;
+	struct net_local *lp;
+	int ioaddr, status;
+	int handled = 0;
+
+	if (dev == NULL) {
+		printk ("at1700_interrupt(): irq %d for unknown device.\n", irq);
+		return IRQ_NONE;
+	}
+
+	ioaddr = dev->base_addr;
+	lp = netdev_priv(dev);
+	
+	spin_lock (&lp->lock);
+	
+	status = inw(ioaddr + TX_STATUS);
+	outw(status, ioaddr + TX_STATUS);
+
+	if (net_debug > 4)
+		printk("%s: Interrupt with status %04x.\n", dev->name, status);
+	if (lp->rx_started == 0 &&
+	    (status & 0xff00 || (inb(ioaddr + RX_MODE) & 0x40) == 0)) {
+		/* Got a packet(s).
+		   We cannot execute net_rx more than once at the same time for
+		   the same device. During executing net_rx, we possibly catch a
+		   Tx interrupt. Thus we flag on rx_started, so that we prevent
+		   the interrupt routine (net_interrupt) to dive into net_rx
+		   again. */
+		handled = 1;
+		lp->rx_started = 1;
+		outb(0x00, ioaddr + RX_INTR);	/* Disable RX intr. */
+		net_rx(dev);
+		outb(0x81, ioaddr + RX_INTR);	/* Enable  RX intr. */
+		lp->rx_started = 0;
+	}
+	if (status & 0x00ff) {
+		handled = 1;
+		if (status & 0x02) {
+			/* More than 16 collisions occurred */
+			if (net_debug > 4)
+				printk("%s: 16 Collision occur during Txing.\n", dev->name);
+			/* Cancel sending a packet. */
+			outb(0x03, ioaddr + COL16CNTL);
+			lp->stats.collisions++;
+		}
+		if (status & 0x82) {
+			lp->stats.tx_packets++;
+			/* The Tx queue has any packets and is not being
+			   transferred a packet from the host, start
+			   transmitting. */
+			if (lp->tx_queue && lp->tx_queue_ready) {
+				outb(0x80 | lp->tx_queue, ioaddr + TX_START);
+				lp->tx_queue = 0;
+				lp->tx_queue_len = 0;
+				dev->trans_start = jiffies;
+				netif_wake_queue (dev);
+			} else {
+				lp->tx_started = 0;
+				netif_wake_queue (dev);
+			}
+		}
+	}
+
+	spin_unlock (&lp->lock);
+	return IRQ_RETVAL(handled);
+}
+
+/* We have a good packet(s), get it/them out of the buffers. */
+static void
+net_rx(struct net_device *dev)
+{
+	struct net_local *lp = netdev_priv(dev);
+	int ioaddr = dev->base_addr;
+	int boguscount = 5;
+
+	while ((inb(ioaddr + RX_MODE) & 0x40) == 0) {
+		ushort status = inw(ioaddr + DATAPORT);
+		ushort pkt_len = inw(ioaddr + DATAPORT);
+
+		if (net_debug > 4)
+			printk("%s: Rxing packet mode %02x status %04x.\n",
+				   dev->name, inb(ioaddr + RX_MODE), status);
+#ifndef final_version
+		if (status == 0) {
+			outb(0x05, ioaddr + RX_CTRL);
+			break;
+		}
+#endif
+
+		if ((status & 0xF0) != 0x20) {	/* There was an error. */
+			lp->stats.rx_errors++;
+			if (status & 0x08) lp->stats.rx_length_errors++;
+			if (status & 0x04) lp->stats.rx_frame_errors++;
+			if (status & 0x02) lp->stats.rx_crc_errors++;
+			if (status & 0x01) lp->stats.rx_over_errors++;
+		} else {
+			/* Malloc up new buffer. */
+			struct sk_buff *skb;
+
+			if (pkt_len > 1550) {
+				printk("%s: The AT1700 claimed a very large packet, size %d.\n",
+					   dev->name, pkt_len);
+				/* Prime the FIFO and then flush the packet. */
+				inw(ioaddr + DATAPORT); inw(ioaddr + DATAPORT);
+				outb(0x05, ioaddr + RX_CTRL);
+				lp->stats.rx_errors++;
+				break;
+			}
+			skb = dev_alloc_skb(pkt_len+3);
+			if (skb == NULL) {
+				printk("%s: Memory squeeze, dropping packet (len %d).\n",
+					   dev->name, pkt_len);
+				/* Prime the FIFO and then flush the packet. */
+				inw(ioaddr + DATAPORT); inw(ioaddr + DATAPORT);
+				outb(0x05, ioaddr + RX_CTRL);
+				lp->stats.rx_dropped++;
+				break;
+			}
+			skb->dev = dev;
+			skb_reserve(skb,2);
+
+			insw(ioaddr + DATAPORT, skb_put(skb,pkt_len), (pkt_len + 1) >> 1);
+			skb->protocol=eth_type_trans(skb, dev);
+			netif_rx(skb);
+			dev->last_rx = jiffies;
+			lp->stats.rx_packets++;
+			lp->stats.rx_bytes += pkt_len;
+		}
+		if (--boguscount <= 0)
+			break;
+	}
+
+	/* If any worth-while packets have been received, dev_rint()
+	   has done a mark_bh(NET_BH) for us and will work on them
+	   when we get to the bottom-half routine. */
+	{
+		int i;
+		for (i = 0; i < 20; i++) {
+			if ((inb(ioaddr + RX_MODE) & 0x40) == 0x40)
+				break;
+			inw(ioaddr + DATAPORT);				/* dummy status read */
+			outb(0x05, ioaddr + RX_CTRL);
+		}
+
+		if (net_debug > 5)
+			printk("%s: Exint Rx packet with mode %02x after %d ticks.\n",
+				   dev->name, inb(ioaddr + RX_MODE), i);
+	}
+	return;
+}
+
+/* The inverse routine to net_open(). */
+static int net_close(struct net_device *dev)
+{
+	struct net_local *lp = netdev_priv(dev);
+	int ioaddr = dev->base_addr;
+
+	netif_stop_queue(dev);
+
+	/* Set configuration register 0 to disable Tx and Rx. */
+	outb(0xda, ioaddr + CONFIG_0);
+
+	/* No statistic counters on the chip to update. */
+
+	/* Disable the IRQ on boards of fmv18x where it is feasible. */
+	if (lp->jumpered) {
+		outb(0x00, ioaddr + IOCONFIG1);
+		free_irq(dev->irq, dev);
+	}
+
+	/* Power-down the chip.  Green, green, green! */
+	outb(0x00, ioaddr + CONFIG_1);
+	return 0;
+}
+
+/* Get the current statistics.
+   This may be called with the card open or closed.
+   There are no on-chip counters, so this function is trivial.
+*/
+static struct net_device_stats *
+net_get_stats(struct net_device *dev)
+{
+	struct net_local *lp = netdev_priv(dev);
+	return &lp->stats;
+}
+
+/*
+  Set the multicast/promiscuous mode for this adaptor.
+*/
+
+static void
+set_rx_mode(struct net_device *dev)
+{
+	int ioaddr = dev->base_addr;
+	struct net_local *lp = netdev_priv(dev);
+	unsigned char mc_filter[8];		 /* Multicast hash filter */
+	unsigned long flags;
+	int i;
+
+	if (dev->flags & IFF_PROMISC) {
+		/* Unconditionally log net taps. */
+		printk("%s: Promiscuous mode enabled.\n", dev->name);
+		memset(mc_filter, 0xff, sizeof(mc_filter));
+		outb(3, ioaddr + RX_MODE);	/* Enable promiscuous mode */
+	} else if (dev->mc_count > MC_FILTERBREAK
+			   ||  (dev->flags & IFF_ALLMULTI)) {
+		/* Too many to filter perfectly -- accept all multicasts. */
+		memset(mc_filter, 0xff, sizeof(mc_filter));
+		outb(2, ioaddr + RX_MODE);	/* Use normal mode. */
+	} else if (dev->mc_count == 0) {
+		memset(mc_filter, 0x00, sizeof(mc_filter));
+		outb(1, ioaddr + RX_MODE);	/* Ignore almost all multicasts. */
+	} else {
+		struct dev_mc_list *mclist;
+		int i;
+
+		memset(mc_filter, 0, sizeof(mc_filter));
+		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+			 i++, mclist = mclist->next) {
+			unsigned int bit =
+				ether_crc_le(ETH_ALEN, mclist->dmi_addr) >> 26;
+			mc_filter[bit >> 3] |= (1 << bit);
+		}
+		outb(0x02, ioaddr + RX_MODE);	/* Use normal mode. */
+	}
+
+	spin_lock_irqsave (&lp->lock, flags);
+	if (memcmp(mc_filter, lp->mc_filter, sizeof(mc_filter))) {
+		int saved_bank = inw(ioaddr + CONFIG_0);
+		/* Switch to bank 1 and set the multicast table. */
+		outw((saved_bank & ~0x0C00) | 0x0480, ioaddr + CONFIG_0);
+		for (i = 0; i < 8; i++)
+			outb(mc_filter[i], ioaddr + PORT_OFFSET(8 + i));
+		memcpy(lp->mc_filter, mc_filter, sizeof(mc_filter));
+		outw(saved_bank, ioaddr + CONFIG_0);
+	}
+	spin_unlock_irqrestore (&lp->lock, flags);
+	return;
+}
+
+#ifdef MODULE
+static struct net_device *dev_at1700;
+
+module_param(io, int, 0);
+module_param(irq, int, 0);
+module_param(net_debug, int, 0);
+MODULE_PARM_DESC(io, "AT1700/FMV18X I/O base address");
+MODULE_PARM_DESC(irq, "AT1700/FMV18X IRQ number");
+MODULE_PARM_DESC(net_debug, "AT1700/FMV18X debug level (0-6)");
+
+int init_module(void)
+{
+	if (io == 0)
+		printk("at1700: You should not use auto-probing with insmod!\n");
+	dev_at1700 = at1700_probe(-1);
+	if (IS_ERR(dev_at1700))
+		return PTR_ERR(dev_at1700);
+	return 0;
+}
+
+void
+cleanup_module(void)
+{
+	unregister_netdev(dev_at1700);
+	cleanup_card(dev_at1700);
+	free_netdev(dev_at1700);
+}
+#endif /* MODULE */
+MODULE_LICENSE("GPL");
+
+
+/*
+ * Local variables:
+ *  compile-command: "gcc -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -c at1700.c"
+ *  alt-compile-command: "gcc -DMODVERSIONS -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -c at1700.c"
+ *  tab-width: 4
+ *  c-basic-offset: 4
+ *  c-indent-level: 4
+ * End:
+ */
+