atl1c: Atheros L1C Gigabit Ethernet driver

Supporting AR8131, and AR8132.

Signed-off-by: Jie Yang <jie.yang@atheros.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 859 insertions, 0 deletions

diff --git a/drivers/net/atl1c/atl1c_hw.h b/drivers/net/atl1c/atl1c_hw.h
new file mode 100644
index 000000000000..c2c738df5c63
--- /dev/null
+++ b/drivers/net/atl1c/atl1c_hw.h
@@ -0,0 +1,859 @@
+/*
+ * Copyright(c) 2008 - 2009 Atheros Corporation. All rights reserved.
+ *
+ * Derived from Intel e1000 driver
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef _ATL1C_HW_H_
+#define _ATL1C_HW_H_
+
+#include <linux/types.h>
+#include <linux/mii.h>
+
+struct atl1c_adapter;
+struct atl1c_hw;
+
+/* function prototype */
+void atl1c_phy_disable(struct atl1c_hw *hw);
+void atl1c_hw_set_mac_addr(struct atl1c_hw *hw);
+int atl1c_phy_reset(struct atl1c_hw *hw);
+int atl1c_read_mac_addr(struct atl1c_hw *hw);
+int atl1c_get_speed_and_duplex(struct atl1c_hw *hw, u16 *speed, u16 *duplex);
+u32 atl1c_hash_mc_addr(struct atl1c_hw *hw, u8 *mc_addr);
+void atl1c_hash_set(struct atl1c_hw *hw, u32 hash_value);
+int atl1c_read_phy_reg(struct atl1c_hw *hw, u16 reg_addr, u16 *phy_data);
+int atl1c_write_phy_reg(struct atl1c_hw *hw, u32 reg_addr, u16 phy_data);
+bool atl1c_read_eeprom(struct atl1c_hw *hw, u32 offset, u32 *p_value);
+int atl1c_phy_init(struct atl1c_hw *hw);
+int atl1c_check_eeprom_exist(struct atl1c_hw *hw);
+int atl1c_restart_autoneg(struct atl1c_hw *hw);
+
+/* register definition */
+#define REG_DEVICE_CAP              	0x5C
+#define DEVICE_CAP_MAX_PAYLOAD_MASK     0x7
+#define DEVICE_CAP_MAX_PAYLOAD_SHIFT    0
+
+#define REG_DEVICE_CTRL			0x60
+#define DEVICE_CTRL_MAX_PAYLOAD_MASK    0x7
+#define DEVICE_CTRL_MAX_PAYLOAD_SHIFT   5
+#define DEVICE_CTRL_MAX_RREQ_SZ_MASK    0x7
+#define DEVICE_CTRL_MAX_RREQ_SZ_SHIFT   12
+
+#define REG_LINK_CTRL			0x68
+#define LINK_CTRL_L0S_EN		0x01
+#define LINK_CTRL_L1_EN			0x02
+
+#define REG_VPD_CAP			0x6C
+#define VPD_CAP_ID_MASK                 0xff
+#define VPD_CAP_ID_SHIFT                0
+#define VPD_CAP_NEXT_PTR_MASK           0xFF
+#define VPD_CAP_NEXT_PTR_SHIFT          8
+#define VPD_CAP_VPD_ADDR_MASK           0x7FFF
+#define VPD_CAP_VPD_ADDR_SHIFT          16
+#define VPD_CAP_VPD_FLAG                0x80000000
+
+#define REG_VPD_DATA                	0x70
+
+#define REG_PCIE_UC_SEVERITY		0x10C
+#define PCIE_UC_SERVRITY_TRN		0x00000001
+#define PCIE_UC_SERVRITY_DLP		0x00000010
+#define PCIE_UC_SERVRITY_PSN_TLP	0x00001000
+#define PCIE_UC_SERVRITY_FCP		0x00002000
+#define PCIE_UC_SERVRITY_CPL_TO		0x00004000
+#define PCIE_UC_SERVRITY_CA		0x00008000
+#define PCIE_UC_SERVRITY_UC		0x00010000
+#define PCIE_UC_SERVRITY_ROV		0x00020000
+#define PCIE_UC_SERVRITY_MLFP		0x00040000
+#define PCIE_UC_SERVRITY_ECRC		0x00080000
+#define PCIE_UC_SERVRITY_UR		0x00100000
+
+#define REG_DEV_SERIALNUM_CTRL		0x200
+#define REG_DEV_MAC_SEL_MASK		0x0 /* 0:EUI; 1:MAC */
+#define REG_DEV_MAC_SEL_SHIFT		0
+#define REG_DEV_SERIAL_NUM_EN_MASK	0x1
+#define REG_DEV_SERIAL_NUM_EN_SHIFT	1
+
+#define REG_TWSI_CTRL               	0x218
+#define TWSI_CTRL_LD_OFFSET_MASK        0xFF
+#define TWSI_CTRL_LD_OFFSET_SHIFT       0
+#define TWSI_CTRL_LD_SLV_ADDR_MASK      0x7
+#define TWSI_CTRL_LD_SLV_ADDR_SHIFT     8
+#define TWSI_CTRL_SW_LDSTART            0x800
+#define TWSI_CTRL_HW_LDSTART            0x1000
+#define TWSI_CTRL_SMB_SLV_ADDR_MASK     0x7F
+#define TWSI_CTRL_SMB_SLV_ADDR_SHIFT    15
+#define TWSI_CTRL_LD_EXIST              0x400000
+#define TWSI_CTRL_READ_FREQ_SEL_MASK    0x3
+#define TWSI_CTRL_READ_FREQ_SEL_SHIFT   23
+#define TWSI_CTRL_FREQ_SEL_100K         0
+#define TWSI_CTRL_FREQ_SEL_200K         1
+#define TWSI_CTRL_FREQ_SEL_300K         2
+#define TWSI_CTRL_FREQ_SEL_400K         3
+#define TWSI_CTRL_SMB_SLV_ADDR
+#define TWSI_CTRL_WRITE_FREQ_SEL_MASK   0x3
+#define TWSI_CTRL_WRITE_FREQ_SEL_SHIFT  24
+
+
+#define REG_PCIE_DEV_MISC_CTRL      	0x21C
+#define PCIE_DEV_MISC_EXT_PIPE     	0x2
+#define PCIE_DEV_MISC_RETRY_BUFDIS 	0x1
+#define PCIE_DEV_MISC_SPIROM_EXIST 	0x4
+#define PCIE_DEV_MISC_SERDES_ENDIAN    	0x8
+#define PCIE_DEV_MISC_SERDES_SEL_DIN   	0x10
+
+#define REG_PCIE_PHYMISC	    	0x1000
+#define PCIE_PHYMISC_FORCE_RCV_DET	0x4
+
+#define REG_TWSI_DEBUG			0x1108
+#define TWSI_DEBUG_DEV_EXIST		0x20000000
+
+#define REG_EEPROM_CTRL			0x12C0
+#define EEPROM_CTRL_DATA_HI_MASK	0xFFFF
+#define EEPROM_CTRL_DATA_HI_SHIFT	0
+#define EEPROM_CTRL_ADDR_MASK		0x3FF
+#define EEPROM_CTRL_ADDR_SHIFT		16
+#define EEPROM_CTRL_ACK			0x40000000
+#define EEPROM_CTRL_RW			0x80000000
+
+#define REG_EEPROM_DATA_LO		0x12C4
+
+#define REG_OTP_CTRL			0x12F0
+#define OTP_CTRL_CLK_EN			0x0002
+
+#define REG_PM_CTRL			0x12F8
+#define PM_CTRL_SDES_EN			0x00000001
+#define PM_CTRL_RBER_EN			0x00000002
+#define PM_CTRL_CLK_REQ_EN		0x00000004
+#define PM_CTRL_ASPM_L1_EN		0x00000008
+#define PM_CTRL_SERDES_L1_EN		0x00000010
+#define PM_CTRL_SERDES_PLL_L1_EN	0x00000020
+#define PM_CTRL_SERDES_PD_EX_L1		0x00000040
+#define PM_CTRL_SERDES_BUDS_RX_L1_EN	0x00000080
+#define PM_CTRL_L0S_ENTRY_TIMER_MASK	0xF
+#define PM_CTRL_L0S_ENTRY_TIMER_SHIFT	8
+#define PM_CTRL_ASPM_L0S_EN		0x00001000
+#define PM_CTRL_CLK_SWH_L1		0x00002000
+#define PM_CTRL_CLK_PWM_VER1_1		0x00004000
+#define PM_CTRL_PCIE_RECV		0x00008000
+#define PM_CTRL_L1_ENTRY_TIMER_MASK	0xF
+#define PM_CTRL_L1_ENTRY_TIMER_SHIFT	16
+#define PM_CTRL_PM_REQ_TIMER_MASK	0xF
+#define PM_CTRL_PM_REQ_TIMER_SHIFT	20
+#define PM_CTRL_LCKDET_TIMER_MASK	0x3F
+#define PM_CTRL_LCKDET_TIMER_SHIFT	24
+#define PM_CTRL_MAC_ASPM_CHK		0x40000000
+#define PM_CTRL_HOTRST			0x80000000
+
+/* Selene Master Control Register */
+#define REG_MASTER_CTRL			0x1400
+#define MASTER_CTRL_SOFT_RST            0x1
+#define MASTER_CTRL_TEST_MODE_MASK	0x3
+#define MASTER_CTRL_TEST_MODE_SHIFT	2
+#define MASTER_CTRL_BERT_START		0x10
+#define MASTER_CTRL_MTIMER_EN           0x100
+#define MASTER_CTRL_MANUAL_INT          0x200
+#define MASTER_CTRL_TX_ITIMER_EN	0x400
+#define MASTER_CTRL_RX_ITIMER_EN	0x800
+#define MASTER_CTRL_CLK_SEL_DIS		0x1000
+#define MASTER_CTRL_CLK_SWH_MODE	0x2000
+#define MASTER_CTRL_INT_RDCLR		0x4000
+#define MASTER_CTRL_REV_NUM_SHIFT	16
+#define MASTER_CTRL_REV_NUM_MASK	0xff
+#define MASTER_CTRL_DEV_ID_SHIFT	24
+#define MASTER_CTRL_DEV_ID_MASK		0x7f
+#define MASTER_CTRL_OTP_SEL		0x80000000
+
+/* Timer Initial Value Register */
+#define REG_MANUAL_TIMER_INIT       	0x1404
+
+/* IRQ ModeratorTimer Initial Value Register */
+#define REG_IRQ_MODRT_TIMER_INIT     	0x1408
+#define IRQ_MODRT_TIMER_MASK		0xffff
+#define IRQ_MODRT_TX_TIMER_SHIFT    	0
+#define IRQ_MODRT_RX_TIMER_SHIFT	16
+
+#define REG_GPHY_CTRL               	0x140C
+#define GPHY_CTRL_EXT_RESET         	0x1
+#define GPHY_CTRL_RTL_MODE		0x2
+#define GPHY_CTRL_LED_MODE		0x4
+#define GPHY_CTRL_ANEG_NOW		0x8
+#define GPHY_CTRL_REV_ANEG		0x10
+#define GPHY_CTRL_GATE_25M_EN       	0x20
+#define GPHY_CTRL_LPW_EXIT          	0x40
+#define GPHY_CTRL_PHY_IDDQ          	0x80
+#define GPHY_CTRL_PHY_IDDQ_DIS      	0x100
+#define GPHY_CTRL_GIGA_DIS		0x200
+#define GPHY_CTRL_HIB_EN            	0x400
+#define GPHY_CTRL_HIB_PULSE         	0x800
+#define GPHY_CTRL_SEL_ANA_RST       	0x1000
+#define GPHY_CTRL_PHY_PLL_ON        	0x2000
+#define GPHY_CTRL_PWDOWN_HW		0x4000
+#define GPHY_CTRL_PHY_PLL_BYPASS	0x8000
+
+#define GPHY_CTRL_DEFAULT (		 \
+		GPHY_CTRL_SEL_ANA_RST	|\
+		GPHY_CTRL_HIB_PULSE	|\
+		GPHY_CTRL_HIB_EN)
+
+#define GPHY_CTRL_PW_WOL_DIS (		 \
+		GPHY_CTRL_SEL_ANA_RST	|\
+		GPHY_CTRL_HIB_PULSE	|\
+		GPHY_CTRL_HIB_EN	|\
+		GPHY_CTRL_PWDOWN_HW	|\
+		GPHY_CTRL_PHY_IDDQ)
+
+/* Block IDLE Status Register */
+#define REG_IDLE_STATUS  		0x1410
+#define IDLE_STATUS_MASK		0x00FF
+#define IDLE_STATUS_RXMAC_NO_IDLE      	0x1
+#define IDLE_STATUS_TXMAC_NO_IDLE      	0x2
+#define IDLE_STATUS_RXQ_NO_IDLE        	0x4
+#define IDLE_STATUS_TXQ_NO_IDLE        	0x8
+#define IDLE_STATUS_DMAR_NO_IDLE       	0x10
+#define IDLE_STATUS_DMAW_NO_IDLE       	0x20
+#define IDLE_STATUS_SMB_NO_IDLE        	0x40
+#define IDLE_STATUS_CMB_NO_IDLE        	0x80
+
+/* MDIO Control Register */
+#define REG_MDIO_CTRL           	0x1414
+#define MDIO_DATA_MASK          	0xffff  /* On MDIO write, the 16-bit
+						 * control data to write to PHY
+						 * MII management register */
+#define MDIO_DATA_SHIFT         	0       /* On MDIO read, the 16-bit
+						 * status data that was read
+						 * from the PHY MII management register */
+#define MDIO_REG_ADDR_MASK      	0x1f    /* MDIO register address */
+#define MDIO_REG_ADDR_SHIFT     	16
+#define MDIO_RW                 	0x200000  /* 1: read, 0: write */
+#define MDIO_SUP_PREAMBLE       	0x400000  /* Suppress preamble */
+#define MDIO_START              	0x800000  /* Write 1 to initiate the MDIO
+						   * master. And this bit is self
+						   * cleared after one cycle */
+#define MDIO_CLK_SEL_SHIFT      	24
+#define MDIO_CLK_25_4           	0
+#define MDIO_CLK_25_6           	2
+#define MDIO_CLK_25_8           	3
+#define MDIO_CLK_25_10          	4
+#define MDIO_CLK_25_14          	5
+#define MDIO_CLK_25_20          	6
+#define MDIO_CLK_25_28          	7
+#define MDIO_BUSY               	0x8000000
+#define MDIO_AP_EN              	0x10000000
+#define MDIO_WAIT_TIMES         	10
+
+/* MII PHY Status Register */
+#define REG_PHY_STATUS           	0x1418
+#define PHY_GENERAL_STATUS_MASK		0xFFFF
+#define PHY_STATUS_RECV_ENABLE		0x0001
+#define PHY_OE_PWSP_STATUS_MASK		0x07FF
+#define PHY_OE_PWSP_STATUS_SHIFT	16
+#define PHY_STATUS_LPW_STATE		0x80000000
+/* BIST Control and Status Register0 (for the Packet Memory) */
+#define REG_BIST0_CTRL              	0x141c
+#define BIST0_NOW                   	0x1
+#define BIST0_SRAM_FAIL             	0x2 /* 1: The SRAM failure is
+					     * un-repairable  because
+					     * it has address decoder
+					     * failure or more than 1 cell
+					     * stuck-to-x failure */
+#define BIST0_FUSE_FLAG             	0x4
+
+/* BIST Control and Status Register1(for the retry buffer of PCI Express) */
+#define REG_BIST1_CTRL			0x1420
+#define BIST1_NOW                   	0x1
+#define BIST1_SRAM_FAIL             	0x2
+#define BIST1_FUSE_FLAG             	0x4
+
+/* SerDes Lock Detect Control and Status Register */
+#define REG_SERDES_LOCK            	0x1424
+#define SERDES_LOCK_DETECT          	0x1  /* SerDes lock detected. This signal
+					      * comes from Analog SerDes */
+#define SERDES_LOCK_DETECT_EN       	0x2  /* 1: Enable SerDes Lock detect function */
+
+/* MAC Control Register  */
+#define REG_MAC_CTRL         		0x1480
+#define MAC_CTRL_TX_EN			0x1
+#define MAC_CTRL_RX_EN			0x2
+#define MAC_CTRL_TX_FLOW		0x4
+#define MAC_CTRL_RX_FLOW            	0x8
+#define MAC_CTRL_LOOPBACK          	0x10
+#define MAC_CTRL_DUPLX              	0x20
+#define MAC_CTRL_ADD_CRC            	0x40
+#define MAC_CTRL_PAD                	0x80
+#define MAC_CTRL_LENCHK             	0x100
+#define MAC_CTRL_HUGE_EN            	0x200
+#define MAC_CTRL_PRMLEN_SHIFT       	10
+#define MAC_CTRL_PRMLEN_MASK        	0xf
+#define MAC_CTRL_RMV_VLAN           	0x4000
+#define MAC_CTRL_PROMIS_EN          	0x8000
+#define MAC_CTRL_TX_PAUSE           	0x10000
+#define MAC_CTRL_SCNT               	0x20000
+#define MAC_CTRL_SRST_TX            	0x40000
+#define MAC_CTRL_TX_SIMURST         	0x80000
+#define MAC_CTRL_SPEED_SHIFT        	20
+#define MAC_CTRL_SPEED_MASK         	0x3
+#define MAC_CTRL_DBG_TX_BKPRESURE   	0x400000
+#define MAC_CTRL_TX_HUGE            	0x800000
+#define MAC_CTRL_RX_CHKSUM_EN       	0x1000000
+#define MAC_CTRL_MC_ALL_EN          	0x2000000
+#define MAC_CTRL_BC_EN              	0x4000000
+#define MAC_CTRL_DBG                	0x8000000
+#define MAC_CTRL_SINGLE_PAUSE_EN	0x10000000
+
+/* MAC IPG/IFG Control Register  */
+#define REG_MAC_IPG_IFG             	0x1484
+#define MAC_IPG_IFG_IPGT_SHIFT      	0 	/* Desired back to back
+						 * inter-packet gap. The
+						 * default is 96-bit time */
+#define MAC_IPG_IFG_IPGT_MASK       	0x7f
+#define MAC_IPG_IFG_MIFG_SHIFT      	8       /* Minimum number of IFG to
+						 * enforce in between RX frames */
+#define MAC_IPG_IFG_MIFG_MASK       	0xff  	/* Frame gap below such IFP is dropped */
+#define MAC_IPG_IFG_IPGR1_SHIFT     	16   	/* 64bit Carrier-Sense window */
+#define MAC_IPG_IFG_IPGR1_MASK      	0x7f
+#define MAC_IPG_IFG_IPGR2_SHIFT     	24    	/* 96-bit IPG window */
+#define MAC_IPG_IFG_IPGR2_MASK      	0x7f
+
+/* MAC STATION ADDRESS  */
+#define REG_MAC_STA_ADDR		0x1488
+
+/* Hash table for multicast address */
+#define REG_RX_HASH_TABLE		0x1490
+
+/* MAC Half-Duplex Control Register */
+#define REG_MAC_HALF_DUPLX_CTRL     	0x1498
+#define MAC_HALF_DUPLX_CTRL_LCOL_SHIFT  0      /* Collision Window */
+#define MAC_HALF_DUPLX_CTRL_LCOL_MASK   0x3ff
+#define MAC_HALF_DUPLX_CTRL_RETRY_SHIFT 12
+#define MAC_HALF_DUPLX_CTRL_RETRY_MASK  0xf
+#define MAC_HALF_DUPLX_CTRL_EXC_DEF_EN  0x10000
+#define MAC_HALF_DUPLX_CTRL_NO_BACK_C   0x20000
+#define MAC_HALF_DUPLX_CTRL_NO_BACK_P   0x40000 /* No back-off on backpressure,
+						 * immediately start the
+						 * transmission after back pressure */
+#define MAC_HALF_DUPLX_CTRL_ABEBE        0x80000 /* 1: Alternative Binary Exponential Back-off Enabled */
+#define MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT  20      /* Maximum binary exponential number */
+#define MAC_HALF_DUPLX_CTRL_ABEBT_MASK   0xf
+#define MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT 24      /* IPG to start JAM for collision based flow control in half-duplex */
+#define MAC_HALF_DUPLX_CTRL_JAMIPG_MASK  0xf     /* mode. In unit of 8-bit time */
+
+/* Maximum Frame Length Control Register   */
+#define REG_MTU                     	0x149c
+
+/* Wake-On-Lan control register */
+#define REG_WOL_CTRL                	0x14a0
+#define WOL_PATTERN_EN              	0x00000001
+#define WOL_PATTERN_PME_EN              0x00000002
+#define WOL_MAGIC_EN                    0x00000004
+#define WOL_MAGIC_PME_EN                0x00000008
+#define WOL_LINK_CHG_EN                 0x00000010
+#define WOL_LINK_CHG_PME_EN             0x00000020
+#define WOL_PATTERN_ST                  0x00000100
+#define WOL_MAGIC_ST                    0x00000200
+#define WOL_LINKCHG_ST                  0x00000400
+#define WOL_CLK_SWITCH_EN               0x00008000
+#define WOL_PT0_EN                      0x00010000
+#define WOL_PT1_EN                      0x00020000
+#define WOL_PT2_EN                      0x00040000
+#define WOL_PT3_EN                      0x00080000
+#define WOL_PT4_EN                      0x00100000
+#define WOL_PT5_EN                      0x00200000
+#define WOL_PT6_EN                      0x00400000
+
+/* WOL Length ( 2 DWORD ) */
+#define REG_WOL_PATTERN_LEN         	0x14a4
+#define WOL_PT_LEN_MASK                 0x7f
+#define WOL_PT0_LEN_SHIFT               0
+#define WOL_PT1_LEN_SHIFT               8
+#define WOL_PT2_LEN_SHIFT               16
+#define WOL_PT3_LEN_SHIFT               24
+#define WOL_PT4_LEN_SHIFT               0
+#define WOL_PT5_LEN_SHIFT               8
+#define WOL_PT6_LEN_SHIFT               16
+
+/* Internal SRAM Partition Register */
+#define RFDX_HEAD_ADDR_MASK		0x03FF
+#define RFDX_HARD_ADDR_SHIFT		0
+#define RFDX_TAIL_ADDR_MASK		0x03FF
+#define RFDX_TAIL_ADDR_SHIFT            16
+
+#define REG_SRAM_RFD0_INFO		0x1500
+#define REG_SRAM_RFD1_INFO		0x1504
+#define REG_SRAM_RFD2_INFO		0x1508
+#define	REG_SRAM_RFD3_INFO		0x150C
+
+#define REG_RFD_NIC_LEN			0x1510 /* In 8-bytes */
+#define RFD_NIC_LEN_MASK		0x03FF
+
+#define REG_SRAM_TRD_ADDR           	0x1518
+#define TPD_HEAD_ADDR_MASK		0x03FF
+#define TPD_HEAD_ADDR_SHIFT		0
+#define TPD_TAIL_ADDR_MASK		0x03FF
+#define TPD_TAIL_ADDR_SHIFT		16
+
+#define REG_SRAM_TRD_LEN            	0x151C /* In 8-bytes */
+#define TPD_NIC_LEN_MASK		0x03FF
+
+#define REG_SRAM_RXF_ADDR          	0x1520
+#define REG_SRAM_RXF_LEN            	0x1524
+#define REG_SRAM_TXF_ADDR           	0x1528
+#define REG_SRAM_TXF_LEN            	0x152C
+#define REG_SRAM_TCPH_ADDR          	0x1530
+#define REG_SRAM_PKTH_ADDR          	0x1532
+
+/*
+ * Load Ptr Register
+ * Software sets this bit after the initialization of the head and tail */
+#define REG_LOAD_PTR                	0x1534
+
+/*
+ * addresses of all descriptors, as well as the following descriptor
+ * control register, which triggers each function block to load the head
+ * pointer to prepare for the operation. This bit is then self-cleared
+ * after one cycle.
+ */
+#define REG_RX_BASE_ADDR_HI		0x1540
+#define REG_TX_BASE_ADDR_HI		0x1544
+#define REG_SMB_BASE_ADDR_HI		0x1548
+#define REG_SMB_BASE_ADDR_LO		0x154C
+#define REG_RFD0_HEAD_ADDR_LO		0x1550
+#define REG_RFD1_HEAD_ADDR_LO		0x1554
+#define REG_RFD2_HEAD_ADDR_LO		0x1558
+#define REG_RFD3_HEAD_ADDR_LO		0x155C
+#define REG_RFD_RING_SIZE		0x1560
+#define RFD_RING_SIZE_MASK		0x0FFF
+#define REG_RX_BUF_SIZE			0x1564
+#define RX_BUF_SIZE_MASK		0xFFFF
+#define REG_RRD0_HEAD_ADDR_LO		0x1568
+#define REG_RRD1_HEAD_ADDR_LO		0x156C
+#define REG_RRD2_HEAD_ADDR_LO		0x1570
+#define REG_RRD3_HEAD_ADDR_LO		0x1574
+#define REG_RRD_RING_SIZE		0x1578
+#define RRD_RING_SIZE_MASK		0x0FFF
+#define REG_HTPD_HEAD_ADDR_LO		0x157C
+#define REG_NTPD_HEAD_ADDR_LO		0x1580
+#define REG_TPD_RING_SIZE		0x1584
+#define TPD_RING_SIZE_MASK		0xFFFF
+#define REG_CMB_BASE_ADDR_LO		0x1588
+
+/* RSS about */
+#define REG_RSS_KEY0                    0x14B0
+#define REG_RSS_KEY1                    0x14B4
+#define REG_RSS_KEY2                    0x14B8
+#define REG_RSS_KEY3                    0x14BC
+#define REG_RSS_KEY4                    0x14C0
+#define REG_RSS_KEY5                    0x14C4
+#define REG_RSS_KEY6                    0x14C8
+#define REG_RSS_KEY7                    0x14CC
+#define REG_RSS_KEY8                    0x14D0
+#define REG_RSS_KEY9                    0x14D4
+#define REG_IDT_TABLE0                	0x14E0
+#define REG_IDT_TABLE1                  0x14E4
+#define REG_IDT_TABLE2                  0x14E8
+#define REG_IDT_TABLE3                  0x14EC
+#define REG_IDT_TABLE4                  0x14F0
+#define REG_IDT_TABLE5                  0x14F4
+#define REG_IDT_TABLE6                  0x14F8
+#define REG_IDT_TABLE7                  0x14FC
+#define REG_IDT_TABLE                   REG_IDT_TABLE0
+#define REG_RSS_HASH_VALUE              0x15B0
+#define REG_RSS_HASH_FLAG               0x15B4
+#define REG_BASE_CPU_NUMBER             0x15B8
+
+/* TXQ Control Register */
+#define REG_TXQ_CTRL                	0x1590
+#define	TXQ_NUM_TPD_BURST_MASK     	0xF
+#define TXQ_NUM_TPD_BURST_SHIFT    	0
+#define TXQ_CTRL_IP_OPTION_EN		0x10
+#define TXQ_CTRL_EN                     0x20
+#define TXQ_CTRL_ENH_MODE               0x40
+#define TXQ_CTRL_LS_8023_EN		0x80
+#define TXQ_TXF_BURST_NUM_SHIFT    	16
+#define TXQ_TXF_BURST_NUM_MASK     	0xFFFF
+
+/* Jumbo packet Threshold for task offload */
+#define REG_TX_TSO_OFFLOAD_THRESH	0x1594 /* In 8-bytes */
+#define TX_TSO_OFFLOAD_THRESH_MASK	0x07FF
+
+#define	REG_TXF_WATER_MARK		0x1598 /* In 8-bytes */
+#define TXF_WATER_MARK_MASK		0x0FFF
+#define TXF_LOW_WATER_MARK_SHIFT	0
+#define TXF_HIGH_WATER_MARK_SHIFT 	16
+#define TXQ_CTRL_BURST_MODE_EN		0x80000000
+
+#define REG_THRUPUT_MON_CTRL		0x159C
+#define THRUPUT_MON_RATE_MASK		0x3
+#define THRUPUT_MON_RATE_SHIFT		0
+#define THRUPUT_MON_EN			0x80
+
+/* RXQ Control Register */
+#define REG_RXQ_CTRL                	0x15A0
+#define ASPM_THRUPUT_LIMIT_MASK		0x3
+#define ASPM_THRUPUT_LIMIT_SHIFT	0
+#define ASPM_THRUPUT_LIMIT_NO		0x00
+#define ASPM_THRUPUT_LIMIT_1M		0x01
+#define ASPM_THRUPUT_LIMIT_10M		0x02
+#define ASPM_THRUPUT_LIMIT_100M		0x04
+#define RXQ1_CTRL_EN			0x10
+#define RXQ2_CTRL_EN			0x20
+#define RXQ3_CTRL_EN			0x40
+#define IPV6_CHKSUM_CTRL_EN		0x80
+#define RSS_HASH_BITS_MASK		0x00FF
+#define RSS_HASH_BITS_SHIFT		8
+#define RSS_HASH_IPV4			0x10000
+#define RSS_HASH_IPV4_TCP		0x20000
+#define RSS_HASH_IPV6			0x40000
+#define RSS_HASH_IPV6_TCP		0x80000
+#define RXQ_RFD_BURST_NUM_MASK		0x003F
+#define RXQ_RFD_BURST_NUM_SHIFT		20
+#define RSS_MODE_MASK			0x0003
+#define RSS_MODE_SHIFT			26
+#define RSS_NIP_QUEUE_SEL_MASK		0x1
+#define RSS_NIP_QUEUE_SEL_SHIFT		28
+#define RRS_HASH_CTRL_EN		0x20000000
+#define RX_CUT_THRU_EN			0x40000000
+#define RXQ_CTRL_EN			0x80000000
+
+#define REG_RFD_FREE_THRESH		0x15A4
+#define RFD_FREE_THRESH_MASK		0x003F
+#define RFD_FREE_HI_THRESH_SHIFT	0
+#define RFD_FREE_LO_THRESH_SHIFT	6
+
+/* RXF flow control register */
+#define REG_RXQ_RXF_PAUSE_THRESH    	0x15A8
+#define RXQ_RXF_PAUSE_TH_HI_SHIFT       0
+#define RXQ_RXF_PAUSE_TH_HI_MASK        0x0FFF
+#define RXQ_RXF_PAUSE_TH_LO_SHIFT       16
+#define RXQ_RXF_PAUSE_TH_LO_MASK        0x0FFF
+
+#define REG_RXD_DMA_CTRL		0x15AC
+#define RXD_DMA_THRESH_MASK		0x0FFF	/* In 8-bytes */
+#define RXD_DMA_THRESH_SHIFT		0
+#define RXD_DMA_DOWN_TIMER_MASK		0xFFFF
+#define RXD_DMA_DOWN_TIMER_SHIFT	16
+
+/* DMA Engine Control Register */
+#define REG_DMA_CTRL                	0x15C0
+#define DMA_CTRL_DMAR_IN_ORDER          0x1
+#define DMA_CTRL_DMAR_ENH_ORDER         0x2
+#define DMA_CTRL_DMAR_OUT_ORDER         0x4
+#define DMA_CTRL_RCB_VALUE              0x8
+#define DMA_CTRL_DMAR_BURST_LEN_MASK    0x0007
+#define DMA_CTRL_DMAR_BURST_LEN_SHIFT   4
+#define DMA_CTRL_DMAW_BURST_LEN_MASK    0x0007
+#define DMA_CTRL_DMAW_BURST_LEN_SHIFT   7
+#define DMA_CTRL_DMAR_REQ_PRI           0x400
+#define DMA_CTRL_DMAR_DLY_CNT_MASK      0x001F
+#define DMA_CTRL_DMAR_DLY_CNT_SHIFT     11
+#define DMA_CTRL_DMAW_DLY_CNT_MASK      0x000F
+#define DMA_CTRL_DMAW_DLY_CNT_SHIFT     16
+#define DMA_CTRL_CMB_EN               	0x100000
+#define DMA_CTRL_SMB_EN			0x200000
+#define DMA_CTRL_CMB_NOW		0x400000
+#define MAC_CTRL_SMB_DIS		0x1000000
+#define DMA_CTRL_SMB_NOW		0x80000000
+
+/* CMB/SMB Control Register */
+#define REG_SMB_STAT_TIMER		0x15C4	/* 2us resolution */
+#define SMB_STAT_TIMER_MASK		0xFFFFFF
+#define REG_CMB_TPD_THRESH		0x15C8
+#define CMB_TPD_THRESH_MASK		0xFFFF
+#define REG_CMB_TX_TIMER		0x15CC	/* 2us resolution */
+#define CMB_TX_TIMER_MASK		0xFFFF
+
+/* Mail box */
+#define MB_RFDX_PROD_IDX_MASK		0xFFFF
+#define REG_MB_RFD0_PROD_IDX		0x15E0
+#define REG_MB_RFD1_PROD_IDX		0x15E4
+#define REG_MB_RFD2_PROD_IDX		0x15E8
+#define REG_MB_RFD3_PROD_IDX		0x15EC
+
+#define MB_PRIO_PROD_IDX_MASK		0xFFFF
+#define REG_MB_PRIO_PROD_IDX		0x15F0
+#define MB_HTPD_PROD_IDX_SHIFT		0
+#define MB_NTPD_PROD_IDX_SHIFT		16
+
+#define MB_PRIO_CONS_IDX_MASK		0xFFFF
+#define REG_MB_PRIO_CONS_IDX		0x15F4
+#define MB_HTPD_CONS_IDX_SHIFT		0
+#define MB_NTPD_CONS_IDX_SHIFT		16
+
+#define REG_MB_RFD01_CONS_IDX		0x15F8
+#define MB_RFD0_CONS_IDX_MASK		0x0000FFFF
+#define MB_RFD1_CONS_IDX_MASK		0xFFFF0000
+#define REG_MB_RFD23_CONS_IDX		0x15FC
+#define MB_RFD2_CONS_IDX_MASK		0x0000FFFF
+#define MB_RFD3_CONS_IDX_MASK		0xFFFF0000
+
+/* Interrupt Status Register */
+#define REG_ISR    			0x1600
+#define ISR_SMB				0x00000001
+#define ISR_TIMER			0x00000002
+/*
+ * Software manual interrupt, for debug. Set when SW_MAN_INT_EN is set
+ * in Table 51 Selene Master Control Register (Offset 0x1400).
+ */
+#define ISR_MANUAL         		0x00000004
+#define ISR_HW_RXF_OV          		0x00000008 /* RXF overflow interrupt */
+#define ISR_RFD0_UR			0x00000010 /* RFD0 under run */
+#define ISR_RFD1_UR			0x00000020
+#define ISR_RFD2_UR			0x00000040
+#define ISR_RFD3_UR			0x00000080
+#define ISR_TXF_UR			0x00000100
+#define ISR_DMAR_TO_RST			0x00000200
+#define ISR_DMAW_TO_RST			0x00000400
+#define ISR_TX_CREDIT			0x00000800
+#define ISR_GPHY			0x00001000
+/* GPHY low power state interrupt */
+#define ISR_GPHY_LPW           		0x00002000
+#define ISR_TXQ_TO_RST			0x00004000
+#define ISR_TX_PKT			0x00008000
+#define ISR_RX_PKT_0			0x00010000
+#define ISR_RX_PKT_1			0x00020000
+#define ISR_RX_PKT_2			0x00040000
+#define ISR_RX_PKT_3			0x00080000
+#define ISR_MAC_RX			0x00100000
+#define ISR_MAC_TX			0x00200000
+#define ISR_UR_DETECTED			0x00400000
+#define ISR_FERR_DETECTED		0x00800000
+#define ISR_NFERR_DETECTED		0x01000000
+#define ISR_CERR_DETECTED		0x02000000
+#define ISR_PHY_LINKDOWN		0x04000000
+#define ISR_DIS_INT			0x80000000
+
+/* Interrupt Mask Register */
+#define REG_IMR				0x1604
+
+#define IMR_NORMAL_MASK		(\
+		ISR_MANUAL	|\
+		ISR_HW_RXF_OV	|\
+		ISR_RFD0_UR	|\
+		ISR_TXF_UR	|\
+		ISR_DMAR_TO_RST	|\
+		ISR_TXQ_TO_RST  |\
+		ISR_DMAW_TO_RST	|\
+		ISR_GPHY	|\
+		ISR_TX_PKT	|\
+		ISR_RX_PKT_0	|\
+		ISR_GPHY_LPW    |\
+		ISR_PHY_LINKDOWN)
+
+#define ISR_RX_PKT 	(\
+	ISR_RX_PKT_0    |\
+	ISR_RX_PKT_1    |\
+	ISR_RX_PKT_2    |\
+	ISR_RX_PKT_3)
+
+#define ISR_OVER	(\
+	ISR_RFD0_UR 	|\
+	ISR_RFD1_UR	|\
+	ISR_RFD2_UR	|\
+	ISR_RFD3_UR	|\
+	ISR_HW_RXF_OV	|\
+	ISR_TXF_UR)
+
+#define ISR_ERROR	(\
+	ISR_DMAR_TO_RST	|\
+	ISR_TXQ_TO_RST  |\
+	ISR_DMAW_TO_RST	|\
+	ISR_PHY_LINKDOWN)
+
+#define REG_INT_RETRIG_TIMER		0x1608
+#define INT_RETRIG_TIMER_MASK		0xFFFF
+
+#define REG_HDS_CTRL			0x160C
+#define HDS_CTRL_EN			0x0001
+#define HDS_CTRL_BACKFILLSIZE_SHIFT	8
+#define HDS_CTRL_BACKFILLSIZE_MASK	0x0FFF
+#define HDS_CTRL_MAX_HDRSIZE_SHIFT	20
+#define HDS_CTRL_MAC_HDRSIZE_MASK	0x0FFF
+
+#define REG_MAC_RX_STATUS_BIN 		0x1700
+#define REG_MAC_RX_STATUS_END 		0x175c
+#define REG_MAC_TX_STATUS_BIN 		0x1760
+#define REG_MAC_TX_STATUS_END 		0x17c0
+
+/* DEBUG ADDR */
+#define REG_DEBUG_DATA0 		0x1900
+#define REG_DEBUG_DATA1 		0x1904
+
+/* PHY Control Register */
+#define MII_BMCR			0x00
+#define BMCR_SPEED_SELECT_MSB		0x0040  /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define BMCR_COLL_TEST_ENABLE		0x0080  /* Collision test enable */
+#define BMCR_FULL_DUPLEX		0x0100  /* FDX =1, half duplex =0 */
+#define BMCR_RESTART_AUTO_NEG		0x0200  /* Restart auto negotiation */
+#define BMCR_ISOLATE			0x0400  /* Isolate PHY from MII */
+#define BMCR_POWER_DOWN			0x0800  /* Power down */
+#define BMCR_AUTO_NEG_EN		0x1000  /* Auto Neg Enable */
+#define BMCR_SPEED_SELECT_LSB		0x2000  /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define BMCR_LOOPBACK			0x4000  /* 0 = normal, 1 = loopback */
+#define BMCR_RESET			0x8000  /* 0 = normal, 1 = PHY reset */
+#define BMCR_SPEED_MASK			0x2040
+#define BMCR_SPEED_1000			0x0040
+#define BMCR_SPEED_100			0x2000
+#define BMCR_SPEED_10			0x0000
+
+/* PHY Status Register */
+#define MII_BMSR			0x01
+#define BMMSR_EXTENDED_CAPS		0x0001  /* Extended register capabilities */
+#define BMSR_JABBER_DETECT		0x0002  /* Jabber Detected */
+#define BMSR_LINK_STATUS		0x0004  /* Link Status 1 = link */
+#define BMSR_AUTONEG_CAPS		0x0008  /* Auto Neg Capable */
+#define BMSR_REMOTE_FAULT		0x0010  /* Remote Fault Detect */
+#define BMSR_AUTONEG_COMPLETE		0x0020  /* Auto Neg Complete */
+#define BMSR_PREAMBLE_SUPPRESS		0x0040  /* Preamble may be suppressed */
+#define BMSR_EXTENDED_STATUS		0x0100  /* Ext. status info in Reg 0x0F */
+#define BMSR_100T2_HD_CAPS		0x0200  /* 100T2 Half Duplex Capable */
+#define BMSR_100T2_FD_CAPS		0x0400  /* 100T2 Full Duplex Capable */
+#define BMSR_10T_HD_CAPS		0x0800  /* 10T   Half Duplex Capable */
+#define BMSR_10T_FD_CAPS		0x1000  /* 10T   Full Duplex Capable */
+#define BMSR_100X_HD_CAPS		0x2000  /* 100X  Half Duplex Capable */
+#define BMMII_SR_100X_FD_CAPS		0x4000  /* 100X  Full Duplex Capable */
+#define BMMII_SR_100T4_CAPS		0x8000  /* 100T4 Capable */
+
+#define MII_PHYSID1			0x02
+#define MII_PHYSID2			0x03
+
+/* Autoneg Advertisement Register */
+#define MII_ADVERTISE			0x04
+#define ADVERTISE_SPEED_MASK		0x01E0
+#define ADVERTISE_DEFAULT_CAP		0x0DE0
+
+/* 1000BASE-T Control Register */
+#define MII_GIGA_CR			0x09
+#define GIGA_CR_1000T_REPEATER_DTE	0x0400  /* 1=Repeater/switch device port 0=DTE device */
+
+#define GIGA_CR_1000T_MS_VALUE		0x0800  /* 1=Configure PHY as Master 0=Configure PHY as Slave */
+#define GIGA_CR_1000T_MS_ENABLE		0x1000  /* 1=Master/Slave manual config value 0=Automatic Master/Slave config */
+#define GIGA_CR_1000T_TEST_MODE_NORMAL	0x0000  /* Normal Operation */
+#define GIGA_CR_1000T_TEST_MODE_1	0x2000  /* Transmit Waveform test */
+#define GIGA_CR_1000T_TEST_MODE_2	0x4000  /* Master Transmit Jitter test */
+#define GIGA_CR_1000T_TEST_MODE_3	0x6000  /* Slave Transmit Jitter test */
+#define GIGA_CR_1000T_TEST_MODE_4	0x8000	/* Transmitter Distortion test */
+#define GIGA_CR_1000T_SPEED_MASK	0x0300
+#define GIGA_CR_1000T_DEFAULT_CAP	0x0300
+
+/* PHY Specific Status Register */
+#define MII_GIGA_PSSR			0x11
+#define GIGA_PSSR_SPD_DPLX_RESOLVED	0x0800  /* 1=Speed & Duplex resolved */
+#define GIGA_PSSR_DPLX			0x2000  /* 1=Duplex 0=Half Duplex */
+#define GIGA_PSSR_SPEED			0xC000  /* Speed, bits 14:15 */
+#define GIGA_PSSR_10MBS			0x0000  /* 00=10Mbs */
+#define GIGA_PSSR_100MBS		0x4000  /* 01=100Mbs */
+#define GIGA_PSSR_1000MBS		0x8000  /* 10=1000Mbs */
+
+/* PHY Interrupt Enable Register */
+#define MII_IER				0x12
+#define IER_LINK_UP			0x0400
+#define IER_LINK_DOWN			0x0800
+
+/* PHY Interrupt Status Register */
+#define MII_ISR				0x13
+#define ISR_LINK_UP			0x0400
+#define ISR_LINK_DOWN			0x0800
+
+/* Cable-Detect-Test Control Register */
+#define MII_CDTC			0x16
+#define CDTC_EN_OFF			0   /* sc */
+#define CDTC_EN_BITS			1
+#define CDTC_PAIR_OFF			8
+#define CDTC_PAIR_BIT			2
+
+/* Cable-Detect-Test Status Register */
+#define MII_CDTS			0x1C
+#define CDTS_STATUS_OFF			8
+#define CDTS_STATUS_BITS		2
+#define CDTS_STATUS_NORMAL		0
+#define CDTS_STATUS_SHORT		1
+#define CDTS_STATUS_OPEN		2
+#define CDTS_STATUS_INVALID		3
+
+#define MII_DBG_ADDR			0x1D
+#define MII_DBG_DATA			0x1E
+
+#define MII_ANA_CTRL_0			0x0
+#define ANA_RESTART_CAL			0x0001
+#define ANA_MANUL_SWICH_ON_SHIFT	0x1
+#define ANA_MANUL_SWICH_ON_MASK		0xF
+#define ANA_MAN_ENABLE			0x0020
+#define ANA_SEL_HSP			0x0040
+#define ANA_EN_HB			0x0080
+#define ANA_EN_HBIAS			0x0100
+#define ANA_OEN_125M			0x0200
+#define ANA_EN_LCKDT			0x0400
+#define ANA_LCKDT_PHY			0x0800
+#define ANA_AFE_MODE			0x1000
+#define ANA_VCO_SLOW			0x2000
+#define ANA_VCO_FAST			0x4000
+#define ANA_SEL_CLK125M_DSP		0x8000
+
+#define MII_ANA_CTRL_4			0x4
+#define ANA_IECHO_ADJ_MASK		0xF
+#define ANA_IECHO_ADJ_3_SHIFT		0
+#define ANA_IECHO_ADJ_2_SHIFT		4
+#define ANA_IECHO_ADJ_1_SHIFT		8
+#define ANA_IECHO_ADJ_0_SHIFT		12
+
+#define MII_ANA_CTRL_5			0x5
+#define ANA_SERDES_CDR_BW_SHIFT		0
+#define ANA_SERDES_CDR_BW_MASK		0x3
+#define ANA_MS_PAD_DBG			0x0004
+#define ANA_SPEEDUP_DBG			0x0008
+#define ANA_SERDES_TH_LOS_SHIFT		4
+#define ANA_SERDES_TH_LOS_MASK		0x3
+#define ANA_SERDES_EN_DEEM		0x0040
+#define ANA_SERDES_TXELECIDLE		0x0080
+#define ANA_SERDES_BEACON		0x0100
+#define ANA_SERDES_HALFTXDR		0x0200
+#define ANA_SERDES_SEL_HSP		0x0400
+#define ANA_SERDES_EN_PLL		0x0800
+#define ANA_SERDES_EN			0x1000
+#define ANA_SERDES_EN_LCKDT		0x2000
+
+#define MII_ANA_CTRL_11			0xB
+#define ANA_PS_HIB_EN			0x8000
+
+#define MII_ANA_CTRL_18			0x12
+#define ANA_TEST_MODE_10BT_01SHIFT	0
+#define ANA_TEST_MODE_10BT_01MASK	0x3
+#define ANA_LOOP_SEL_10BT		0x0004
+#define ANA_RGMII_MODE_SW		0x0008
+#define ANA_EN_LONGECABLE		0x0010
+#define ANA_TEST_MODE_10BT_2		0x0020
+#define ANA_EN_10BT_IDLE		0x0400
+#define ANA_EN_MASK_TB			0x0800
+#define ANA_TRIGGER_SEL_TIMER_SHIFT	12
+#define ANA_TRIGGER_SEL_TIMER_MASK	0x3
+#define ANA_INTERVAL_SEL_TIMER_SHIFT	14
+#define ANA_INTERVAL_SEL_TIMER_MASK	0x3
+
+#define MII_ANA_CTRL_41			0x29
+#define ANA_TOP_PS_EN			0x8000
+
+#define MII_ANA_CTRL_54			0x36
+#define ANA_LONG_CABLE_TH_100_SHIFT	0
+#define ANA_LONG_CABLE_TH_100_MASK	0x3F
+#define ANA_DESERVED			0x0040
+#define ANA_EN_LIT_CH			0x0080
+#define ANA_SHORT_CABLE_TH_100_SHIFT	8
+#define ANA_SHORT_CABLE_TH_100_MASK	0x3F
+#define ANA_BP_BAD_LINK_ACCUM		0x4000
+#define ANA_BP_SMALL_BW			0x8000
+
+#endif /*_ATL1C_HW_H_*/