net: dsa: lantiq: convert to phylink_generic_validate()

Populate the supported interfaces and MAC capabilities for the Lantiq
DSA switches and remove the old validate implementation to allow DSA to
use phylink_generic_validate() for this switch driver.

The exclusion of Gigabit linkmodes for MII, Reverse MII and Reduced MII
links is handled within phylink_generic_validate() in phylink, so there
is no need to make them conditional on the interface mode in the driver.

Reviewed-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

1 files changed, 38 insertions, 82 deletions

diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index 7056d98d8177..583af774e1bd 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -1438,114 +1438,70 @@ static int gswip_port_fdb_dump(struct dsa_switch *ds, int port,
 	return 0;
 }
 
-static void gswip_phylink_set_capab(unsigned long *supported,
-				    struct phylink_link_state *state)
-{
-	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
-
-	/* Allow all the expected bits */
-	phylink_set(mask, Autoneg);
-	phylink_set_port_modes(mask);
-	phylink_set(mask, Pause);
-	phylink_set(mask, Asym_Pause);
-
-	/* With the exclusion of MII, Reverse MII and Reduced MII, we
-	 * support Gigabit, including Half duplex
-	 */
-	if (state->interface != PHY_INTERFACE_MODE_MII &&
-	    state->interface != PHY_INTERFACE_MODE_REVMII &&
-	    state->interface != PHY_INTERFACE_MODE_RMII) {
-		phylink_set(mask, 1000baseT_Full);
-		phylink_set(mask, 1000baseT_Half);
-	}
-
-	phylink_set(mask, 10baseT_Half);
-	phylink_set(mask, 10baseT_Full);
-	phylink_set(mask, 100baseT_Half);
-	phylink_set(mask, 100baseT_Full);
-
-	linkmode_and(supported, supported, mask);
-	linkmode_and(state->advertising, state->advertising, mask);
-}
-
-static void gswip_xrx200_phylink_validate(struct dsa_switch *ds, int port,
-					  unsigned long *supported,
-					  struct phylink_link_state *state)
+static void gswip_xrx200_phylink_get_caps(struct dsa_switch *ds, int port,
+					  struct phylink_config *config)
 {
 	switch (port) {
 	case 0:
 	case 1:
-		if (!phy_interface_mode_is_rgmii(state->interface) &&
-		    state->interface != PHY_INTERFACE_MODE_MII &&
-		    state->interface != PHY_INTERFACE_MODE_REVMII &&
-		    state->interface != PHY_INTERFACE_MODE_RMII)
-			goto unsupported;
+		phy_interface_set_rgmii(config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_MII,
+			  config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_REVMII,
+			  config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_RMII,
+			  config->supported_interfaces);
 		break;
+
 	case 2:
 	case 3:
 	case 4:
-		if (state->interface != PHY_INTERFACE_MODE_INTERNAL)
-			goto unsupported;
+		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
+			  config->supported_interfaces);
 		break;
+
 	case 5:
-		if (!phy_interface_mode_is_rgmii(state->interface) &&
-		    state->interface != PHY_INTERFACE_MODE_INTERNAL)
-			goto unsupported;
+		phy_interface_set_rgmii(config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
+			  config->supported_interfaces);
 		break;
-	default:
-		linkmode_zero(supported);
-		dev_err(ds->dev, "Unsupported port: %i\n", port);
-		return;
 	}
 
-	gswip_phylink_set_capab(supported, state);
-
-	return;
-
-unsupported:
-	linkmode_zero(supported);
-	dev_err(ds->dev, "Unsupported interface '%s' for port %d\n",
-		phy_modes(state->interface), port);
+	config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+		MAC_10 | MAC_100 | MAC_1000;
 }
 
-static void gswip_xrx300_phylink_validate(struct dsa_switch *ds, int port,
-					  unsigned long *supported,
-					  struct phylink_link_state *state)
+static void gswip_xrx300_phylink_get_caps(struct dsa_switch *ds, int port,
+					  struct phylink_config *config)
 {
 	switch (port) {
 	case 0:
-		if (!phy_interface_mode_is_rgmii(state->interface) &&
-		    state->interface != PHY_INTERFACE_MODE_GMII &&
-		    state->interface != PHY_INTERFACE_MODE_RMII)
-			goto unsupported;
+		phy_interface_set_rgmii(config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_GMII,
+			  config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_RMII,
+			  config->supported_interfaces);
 		break;
+
 	case 1:
 	case 2:
 	case 3:
 	case 4:
-		if (state->interface != PHY_INTERFACE_MODE_INTERNAL)
-			goto unsupported;
+		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
+			  config->supported_interfaces);
 		break;
+
 	case 5:
-		if (!phy_interface_mode_is_rgmii(state->interface) &&
-		    state->interface != PHY_INTERFACE_MODE_INTERNAL &&
-		    state->interface != PHY_INTERFACE_MODE_RMII)
-			goto unsupported;
+		phy_interface_set_rgmii(config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
+			  config->supported_interfaces);
+		__set_bit(PHY_INTERFACE_MODE_RMII,
+			  config->supported_interfaces);
 		break;
-	default:
-		linkmode_zero(supported);
-		dev_err(ds->dev, "Unsupported port: %i\n", port);
-		return;
 	}
 
-	gswip_phylink_set_capab(supported, state);
-
-	return;
-
-unsupported:
-	linkmode_zero(supported);
-	dev_err(ds->dev, "Unsupported interface '%s' for port %d\n",
-		phy_modes(state->interface), port);
+	config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+		MAC_10 | MAC_100 | MAC_1000;
 }
 
 static void gswip_port_set_link(struct gswip_priv *priv, int port, bool link)
@@ -1827,7 +1783,7 @@ static const struct dsa_switch_ops gswip_xrx200_switch_ops = {
 	.port_fdb_add		= gswip_port_fdb_add,
 	.port_fdb_del		= gswip_port_fdb_del,
 	.port_fdb_dump		= gswip_port_fdb_dump,
-	.phylink_validate	= gswip_xrx200_phylink_validate,
+	.phylink_get_caps	= gswip_xrx200_phylink_get_caps,
 	.phylink_mac_config	= gswip_phylink_mac_config,
 	.phylink_mac_link_down	= gswip_phylink_mac_link_down,
 	.phylink_mac_link_up	= gswip_phylink_mac_link_up,
@@ -1851,7 +1807,7 @@ static const struct dsa_switch_ops gswip_xrx300_switch_ops = {
 	.port_fdb_add		= gswip_port_fdb_add,
 	.port_fdb_del		= gswip_port_fdb_del,
 	.port_fdb_dump		= gswip_port_fdb_dump,
-	.phylink_validate	= gswip_xrx300_phylink_validate,
+	.phylink_get_caps	= gswip_xrx300_phylink_get_caps,
 	.phylink_mac_config	= gswip_phylink_mac_config,
 	.phylink_mac_link_down	= gswip_phylink_mac_link_down,
 	.phylink_mac_link_up	= gswip_phylink_mac_link_up,