Merge tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Complete rework of garbage collection of AF_UNIX sockets.

     AF_UNIX is prone to forming reference count cycles due to fd
     passing functionality. New method based on Tarjan's Strongly
     Connected Components algorithm should be both faster and remove a
     lot of workarounds we accumulated over the years.

   - Add TCP fraglist GRO support, allowing chaining multiple TCP
     packets and forwarding them together. Useful for small switches /
     routers which lack basic checksum offload in some scenarios (e.g.
     PPPoE).

   - Support using SMP threads for handling packet backlog i.e. packet
     processing from software interfaces and old drivers which don't use
     NAPI. This helps move the processing out of the softirq jumble.

   - Continue work of converting from rtnl lock to RCU protection.

     Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
     address labels, netdev threaded NAPI sysfs files, bonding driver's
     sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
     TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
     of the link information available via rtnetlink.

   - Small optimizations from Eric to UDP wake up handling, memory
     accounting, RPS/RFS implementation, TCP packet sizing etc.

   - Allow direct page recycling in the bulk API used by XDP, for +2%
     PPS.

   - Support peek with an offset on TCP sockets.

   - Add MPTCP APIs for querying last time packets were received/sent/acked
     and whether MPTCP "upgrade" succeeded on a TCP socket.

   - Add intra-node communication shortcut to improve SMC performance.

   - Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
     driver.

   - Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.

   - Add reset reasons for tracing what caused a TCP reset to be sent.

   - Introduce direction attribute for xfrm (IPSec) states. State can be
     used either for input or output packet processing.

  Things we sprinkled into general kernel code:

   - Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().

     This required touch-ups and renaming of a few existing users.

   - Add Endian-dependent __counted_by_{le,be} annotations.

   - Make building selftests "quieter" by printing summaries like
     "CC object.o" rather than full commands with all the arguments.

  Netfilter:

   - Use GFP_KERNEL to clone elements, to deal better with OOM
     situations and avoid failures in the .commit step.

  BPF:

   - Add eBPF JIT for ARCv2 CPUs.

   - Support attaching kprobe BPF programs through kprobe_multi link in
     a session mode, meaning, a BPF program is attached to both function
     entry and return, the entry program can decide if the return
     program gets executed and the entry program can share u64 cookie
     value with return program. "Session mode" is a common use-case for
     tetragon and bpftrace.

   - Add the ability to specify and retrieve BPF cookie for raw
     tracepoint programs in order to ease migration from classic to raw
     tracepoints.

   - Add an internal-only BPF per-CPU instruction for resolving per-CPU
     memory addresses and implement support in x86, ARM64 and RISC-V
     JITs. This allows inlining functions which need to access per-CPU
     state.

   - Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
     atomics in bpf_arena which can be JITed as a single x86
     instruction. Support BPF arena on ARM64.

   - Add a new bpf_wq API for deferring events and refactor
     process-context bpf_timer code to keep common code where possible.

   - Harden the BPF verifier's and/or/xor value tracking.

   - Introduce crypto kfuncs to let BPF programs call kernel crypto
     APIs.

   - Support bpf_tail_call_static() helper for BPF programs with GCC 13.

   - Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
     program to have code sections where preemption is disabled.

  Driver API:

   - Skip software TC processing completely if all installed rules are
     marked as HW-only, instead of checking the HW-only flag rule by
     rule.

   - Add support for configuring PoE (Power over Ethernet), similar to
     the already existing support for PoDL (Power over Data Line)
     config.

   - Initial bits of a queue control API, for now allowing a single
     queue to be reset without disturbing packet flow to other queues.

   - Common (ethtool) statistics for hardware timestamping.

  Tests and tooling:

   - Remove the need to create a config file to run the net forwarding
     tests so that a naive "make run_tests" can exercise them.

   - Define a method of writing tests which require an external endpoint
     to communicate with (to send/receive data towards the test
     machine). Add a few such tests.

   - Create a shared code library for writing Python tests. Expose the
     YAML Netlink library from tools/ to the tests for easy Netlink
     access.

   - Move netfilter tests under net/, extend them, separate performance
     tests from correctness tests, and iron out issues found by running
     them "on every commit".

   - Refactor BPF selftests to use common network helpers.

   - Further work filling in YAML definitions of Netlink messages for:
     nftables, team driver, bonding interfaces, vlan interfaces, VF
     info, TC u32 mark, TC police action.

   - Teach Python YAML Netlink to decode attribute policies.

   - Extend the definition of the "indexed array" construct in the specs
     to cover arrays of scalars rather than just nests.

   - Add hyperlinks between definitions in generated Netlink docs.

  Drivers:

   - Make sure unsupported flower control flags are rejected by drivers,
     and make more drivers report errors directly to the application
     rather than dmesg (large number of driver changes from Asbjørn
     Sloth Tønnesen).

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support multiple RSS contexts and steering traffic to them
         - support XDP metadata
         - make page pool allocations more NUMA aware
      - Intel (100G, ice, idpf):
         - extract datapath code common among Intel drivers into a library
         - use fewer resources in switchdev by sharing queues with the PF
         - add PFCP filter support
         - add Ethernet filter support
         - use a spinlock instead of HW lock in PTP clock ops
         - support 5 layer Tx scheduler topology
      - nVidia/Mellanox:
         - 800G link modes and 100G SerDes speeds
         - per-queue IRQ coalescing configuration
      - Marvell Octeon:
         - support offloading TC packet mark action

   - Ethernet NICs consumer, embedded and virtual:
      - stop lying about skb->truesize in USB Ethernet drivers, it
        messes up TCP memory calculations
      - Google cloud vNIC:
         - support changing ring size via ethtool
         - support ring reset using the queue control API
      - VirtIO net:
         - expose flow hash from RSS to XDP
         - per-queue statistics
         - add selftests
      - Synopsys (stmmac):
         - support controllers which require an RX clock signal from the
           MII bus to perform their hardware initialization
      - TI:
         - icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
         - icssg_prueth: add SW TX / RX Coalescing based on hrtimers
         - cpsw: minimal XDP support
      - Renesas (ravb):
         - support describing the MDIO bus
      - Realtek (r8169):
         - add support for RTL8168M
      - Microchip Sparx5:
         - matchall and flower actions mirred and redirect

   - Ethernet switches:
      - nVidia/Mellanox:
         - improve events processing performance
      - Marvell:
         - add support for MV88E6250 family internal PHYs
      - Microchip:
         - add DCB and DSCP mapping support for KSZ switches
         - vsc73xx: convert to PHYLINK
      - Realtek:
         - rtl8226b/rtl8221b: add C45 instances and SerDes switching

   - Many driver changes related to PHYLIB and PHYLINK deprecated API
     cleanup

   - Ethernet PHYs:
      - Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
      - micrel: lan8814: add support for PPS out and external timestamp trigger

   - WiFi:
      - Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
        drivers. Modern devices can only be configured using nl80211.
      - mac80211/cfg80211
         - handle color change per link for WiFi 7 Multi-Link Operation
      - Intel (iwlwifi):
         - don't support puncturing in 5 GHz
         - support monitor mode on passive channels
         - BZ-W device support
         - P2P with HE/EHT support
         - re-add support for firmware API 90
         - provide channel survey information for Automatic Channel Selection
      - MediaTek (mt76):
         - mt7921 LED control
         - mt7925 EHT radiotap support
         - mt7920e PCI support
      - Qualcomm (ath11k):
         - P2P support for QCA6390, WCN6855 and QCA2066
         - support hibernation
         - ieee80211-freq-limit Device Tree property support
      - Qualcomm (ath12k):
         - refactoring in preparation of multi-link support
         - suspend and hibernation support
         - ACPI support
         - debugfs support, including dfs_simulate_radar support
      - RealTek:
         - rtw88: RTL8723CS SDIO device support
         - rtw89: RTL8922AE Wi-Fi 7 PCI device support
         - rtw89: complete features of new WiFi 7 chip 8922AE including
           BT-coexistence and Wake-on-WLAN
         - rtw89: use BIOS ACPI settings to set TX power and channels
         - rtl8xxxu: enable Management Frame Protection (MFP) support

   - Bluetooth:
      - support for Intel BlazarI and Filmore Peak2 (BE201)
      - support for MediaTek MT7921S SDIO
      - initial support for Intel PCIe BT driver
      - remove HCI_AMP support"

* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
  selftests: netfilter: fix packetdrill conntrack testcase
  net: gro: fix napi_gro_cb zeroed alignment
  Bluetooth: btintel_pcie: Refactor and code cleanup
  Bluetooth: btintel_pcie: Fix warning reported by sparse
  Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
  Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
  Bluetooth: btintel_pcie: Fix compiler warnings
  Bluetooth: btintel_pcie: Add *setup* function to download firmware
  Bluetooth: btintel_pcie: Add support for PCIe transport
  Bluetooth: btintel: Export few static functions
  Bluetooth: HCI: Remove HCI_AMP support
  Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
  Bluetooth: qca: Fix error code in qca_read_fw_build_info()
  Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
  Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
  Bluetooth: btintel: Add support for BlazarI
  LE Create Connection command timeout increased to 20 secs
  dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
  Bluetooth: compute LE flow credits based on recvbuf space
  Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
  ...

12 files changed, 1152 insertions, 211 deletions

diff --git a/drivers/net/dsa/microchip/Kconfig b/drivers/net/dsa/microchip/Kconfig
index 394ca8678d2b..c1b906c05a02 100644
--- a/drivers/net/dsa/microchip/Kconfig
+++ b/drivers/net/dsa/microchip/Kconfig
@@ -4,6 +4,8 @@ menuconfig NET_DSA_MICROCHIP_KSZ_COMMON
 	depends on NET_DSA
 	select NET_DSA_TAG_KSZ
 	select NET_DSA_TAG_NONE
+	select NET_IEEE8021Q_HELPERS
+	select DCB
 	help
 	  This driver adds support for Microchip KSZ9477 series switch and
 	  KSZ8795/KSZ88x3 switch chips.
diff --git a/drivers/net/dsa/microchip/Makefile b/drivers/net/dsa/microchip/Makefile
index 49459a50dbc8..1cfba1ec9355 100644
--- a/drivers/net/dsa/microchip/Makefile
+++ b/drivers/net/dsa/microchip/Makefile
@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON)	+= ksz_switch.o
-ksz_switch-objs := ksz_common.o
+ksz_switch-objs := ksz_common.o ksz_dcb.o
 ksz_switch-objs += ksz9477.o ksz9477_acl.o ksz9477_tc_flower.o
 ksz_switch-objs += ksz8795.o
 ksz_switch-objs += lan937x_main.o
diff --git a/drivers/net/dsa/microchip/ksz8.h b/drivers/net/dsa/microchip/ksz8.h
index 1a5225264e6a..ae43077e76c3 100644
--- a/drivers/net/dsa/microchip/ksz8.h
+++ b/drivers/net/dsa/microchip/ksz8.h
@@ -19,8 +19,6 @@ void ksz8_flush_dyn_mac_table(struct ksz_device *dev, int port);
 void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port);
 int ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val);
 int ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val);
-int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
-			 u8 *fid, u8 *src_port, u8 *timestamp, u16 *entries);
 void ksz8_r_mib_cnt(struct ksz_device *dev, int port, u16 addr, u64 *cnt);
 void ksz8_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
 		    u64 *dropped, u64 *cnt);
@@ -56,9 +54,10 @@ int ksz8_reset_switch(struct ksz_device *dev);
 int ksz8_switch_init(struct ksz_device *dev);
 void ksz8_switch_exit(struct ksz_device *dev);
 int ksz8_change_mtu(struct ksz_device *dev, int port, int mtu);
-void ksz8_phylink_mac_link_up(struct ksz_device *dev, int port,
-			      unsigned int mode, phy_interface_t interface,
-			      struct phy_device *phydev, int speed, int duplex,
+void ksz8_phylink_mac_link_up(struct phylink_config *config,
+			      struct phy_device *phydev, unsigned int mode,
+			      phy_interface_t interface, int speed, int duplex,
 			      bool tx_pause, bool rx_pause);
+int ksz8_all_queues_split(struct ksz_device *dev, int queues);
 
 #endif
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 14923535ca7e..d27b9c36d73f 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -127,37 +127,71 @@ int ksz8_change_mtu(struct ksz_device *dev, int port, int mtu)
 	return -EOPNOTSUPP;
 }
 
-static void ksz8795_set_prio_queue(struct ksz_device *dev, int port, int queue)
+static int ksz8_port_queue_split(struct ksz_device *dev, int port, int queues)
 {
-	u8 hi, lo;
+	u8 mask_4q, mask_2q;
+	u8 reg_4q, reg_2q;
+	u8 data_4q = 0;
+	u8 data_2q = 0;
+	int ret;
 
-	/* Number of queues can only be 1, 2, or 4. */
-	switch (queue) {
-	case 4:
-	case 3:
-		queue = PORT_QUEUE_SPLIT_4;
-		break;
-	case 2:
-		queue = PORT_QUEUE_SPLIT_2;
-		break;
-	default:
-		queue = PORT_QUEUE_SPLIT_1;
+	if (ksz_is_ksz88x3(dev)) {
+		mask_4q = KSZ8873_PORT_4QUEUE_SPLIT_EN;
+		mask_2q = KSZ8873_PORT_2QUEUE_SPLIT_EN;
+		reg_4q = REG_PORT_CTRL_0;
+		reg_2q = REG_PORT_CTRL_2;
+
+		/* KSZ8795 family switches have Weighted Fair Queueing (WFQ)
+		 * enabled by default. Enable it for KSZ8873 family switches
+		 * too. Default value for KSZ8873 family is strict priority,
+		 * which should be enabled by using TC_SETUP_QDISC_ETS, not
+		 * by default.
+		 */
+		ret = ksz_rmw8(dev, REG_SW_CTRL_3, WEIGHTED_FAIR_QUEUE_ENABLE,
+			       WEIGHTED_FAIR_QUEUE_ENABLE);
+		if (ret)
+			return ret;
+	} else {
+		mask_4q = KSZ8795_PORT_4QUEUE_SPLIT_EN;
+		mask_2q = KSZ8795_PORT_2QUEUE_SPLIT_EN;
+		reg_4q = REG_PORT_CTRL_13;
+		reg_2q = REG_PORT_CTRL_0;
+
+		/* TODO: this is legacy from initial KSZ8795 driver, should be
+		 * moved to appropriate place in the future.
+		 */
+		ret = ksz_rmw8(dev, REG_SW_CTRL_19,
+			       SW_OUT_RATE_LIMIT_QUEUE_BASED,
+			       SW_OUT_RATE_LIMIT_QUEUE_BASED);
+		if (ret)
+			return ret;
 	}
-	ksz_pread8(dev, port, REG_PORT_CTRL_0, &lo);
-	ksz_pread8(dev, port, P_DROP_TAG_CTRL, &hi);
-	lo &= ~PORT_QUEUE_SPLIT_L;
-	if (queue & PORT_QUEUE_SPLIT_2)
-		lo |= PORT_QUEUE_SPLIT_L;
-	hi &= ~PORT_QUEUE_SPLIT_H;
-	if (queue & PORT_QUEUE_SPLIT_4)
-		hi |= PORT_QUEUE_SPLIT_H;
-	ksz_pwrite8(dev, port, REG_PORT_CTRL_0, lo);
-	ksz_pwrite8(dev, port, P_DROP_TAG_CTRL, hi);
-
-	/* Default is port based for egress rate limit. */
-	if (queue != PORT_QUEUE_SPLIT_1)
-		ksz_cfg(dev, REG_SW_CTRL_19, SW_OUT_RATE_LIMIT_QUEUE_BASED,
-			true);
+
+	if (queues == 4)
+		data_4q = mask_4q;
+	else if (queues == 2)
+		data_2q = mask_2q;
+
+	ret = ksz_prmw8(dev, port, reg_4q, mask_4q, data_4q);
+	if (ret)
+		return ret;
+
+	return ksz_prmw8(dev, port, reg_2q, mask_2q, data_2q);
+}
+
+int ksz8_all_queues_split(struct ksz_device *dev, int queues)
+{
+	struct dsa_switch *ds = dev->ds;
+	const struct dsa_port *dp;
+
+	dsa_switch_for_each_port(dp, ds) {
+		int ret = ksz8_port_queue_split(dev, dp->index, queues);
+
+		if (ret)
+			return ret;
+	}
+
+	return 0;
 }
 
 void ksz8_r_mib_cnt(struct ksz_device *dev, int port, u16 addr, u64 *cnt)
@@ -385,39 +419,39 @@ static int ksz8_valid_dyn_entry(struct ksz_device *dev, u8 *data)
 	int timeout = 100;
 	const u32 *masks;
 	const u16 *regs;
+	int ret;
 
 	masks = dev->info->masks;
 	regs = dev->info->regs;
 
 	do {
-		ksz_read8(dev, regs[REG_IND_DATA_CHECK], data);
+		ret = ksz_read8(dev, regs[REG_IND_DATA_CHECK], data);
+		if (ret)
+			return ret;
+
 		timeout--;
 	} while ((*data & masks[DYNAMIC_MAC_TABLE_NOT_READY]) && timeout);
 
 	/* Entry is not ready for accessing. */
-	if (*data & masks[DYNAMIC_MAC_TABLE_NOT_READY]) {
-		return -EAGAIN;
-	/* Entry is ready for accessing. */
-	} else {
-		ksz_read8(dev, regs[REG_IND_DATA_8], data);
+	if (*data & masks[DYNAMIC_MAC_TABLE_NOT_READY])
+		return -ETIMEDOUT;
 
-		/* There is no valid entry in the table. */
-		if (*data & masks[DYNAMIC_MAC_TABLE_MAC_EMPTY])
-			return -ENXIO;
-	}
-	return 0;
+	/* Entry is ready for accessing. */
+	return ksz_read8(dev, regs[REG_IND_DATA_8], data);
 }
 
-int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
-			 u8 *fid, u8 *src_port, u8 *timestamp, u16 *entries)
+static int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
+				u8 *fid, u8 *src_port, u16 *entries)
 {
 	u32 data_hi, data_lo;
 	const u8 *shifts;
 	const u32 *masks;
 	const u16 *regs;
 	u16 ctrl_addr;
+	u64 buf = 0;
 	u8 data;
-	int rc;
+	int cnt;
+	int ret;
 
 	shifts = dev->info->shifts;
 	masks = dev->info->masks;
@@ -426,49 +460,50 @@ int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
 	ctrl_addr = IND_ACC_TABLE(TABLE_DYNAMIC_MAC | TABLE_READ) | addr;
 
 	mutex_lock(&dev->alu_mutex);
-	ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr);
+	ret = ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr);
+	if (ret)
+		goto unlock_alu;
+
+	ret = ksz8_valid_dyn_entry(dev, &data);
+	if (ret)
+		goto unlock_alu;
 
-	rc = ksz8_valid_dyn_entry(dev, &data);
-	if (rc == -EAGAIN) {
-		if (addr == 0)
-			*entries = 0;
-	} else if (rc == -ENXIO) {
+	if (data & masks[DYNAMIC_MAC_TABLE_MAC_EMPTY]) {
 		*entries = 0;
-	/* At least one valid entry in the table. */
-	} else {
-		u64 buf = 0;
-		int cnt;
-
-		ksz_read64(dev, regs[REG_IND_DATA_HI], &buf);
-		data_hi = (u32)(buf >> 32);
-		data_lo = (u32)buf;
-
-		/* Check out how many valid entry in the table. */
-		cnt = data & masks[DYNAMIC_MAC_TABLE_ENTRIES_H];
-		cnt <<= shifts[DYNAMIC_MAC_ENTRIES_H];
-		cnt |= (data_hi & masks[DYNAMIC_MAC_TABLE_ENTRIES]) >>
-			shifts[DYNAMIC_MAC_ENTRIES];
-		*entries = cnt + 1;
-
-		*fid = (data_hi & masks[DYNAMIC_MAC_TABLE_FID]) >>
-			shifts[DYNAMIC_MAC_FID];
-		*src_port = (data_hi & masks[DYNAMIC_MAC_TABLE_SRC_PORT]) >>
-			shifts[DYNAMIC_MAC_SRC_PORT];
-		*timestamp = (data_hi & masks[DYNAMIC_MAC_TABLE_TIMESTAMP]) >>
-			shifts[DYNAMIC_MAC_TIMESTAMP];
-
-		mac_addr[5] = (u8)data_lo;
-		mac_addr[4] = (u8)(data_lo >> 8);
-		mac_addr[3] = (u8)(data_lo >> 16);
-		mac_addr[2] = (u8)(data_lo >> 24);
-
-		mac_addr[1] = (u8)data_hi;
-		mac_addr[0] = (u8)(data_hi >> 8);
-		rc = 0;
+		goto unlock_alu;
 	}
+
+	ret = ksz_read64(dev, regs[REG_IND_DATA_HI], &buf);
+	if (ret)
+		goto unlock_alu;
+
+	data_hi = (u32)(buf >> 32);
+	data_lo = (u32)buf;
+
+	/* Check out how many valid entry in the table. */
+	cnt = data & masks[DYNAMIC_MAC_TABLE_ENTRIES_H];
+	cnt <<= shifts[DYNAMIC_MAC_ENTRIES_H];
+	cnt |= (data_hi & masks[DYNAMIC_MAC_TABLE_ENTRIES]) >>
+		shifts[DYNAMIC_MAC_ENTRIES];
+	*entries = cnt + 1;
+
+	*fid = (data_hi & masks[DYNAMIC_MAC_TABLE_FID]) >>
+		shifts[DYNAMIC_MAC_FID];
+	*src_port = (data_hi & masks[DYNAMIC_MAC_TABLE_SRC_PORT]) >>
+		shifts[DYNAMIC_MAC_SRC_PORT];
+
+	mac_addr[5] = (u8)data_lo;
+	mac_addr[4] = (u8)(data_lo >> 8);
+	mac_addr[3] = (u8)(data_lo >> 16);
+	mac_addr[2] = (u8)(data_lo >> 24);
+
+	mac_addr[1] = (u8)data_hi;
+	mac_addr[0] = (u8)(data_hi >> 8);
+
+unlock_alu:
 	mutex_unlock(&dev->alu_mutex);
 
-	return rc;
+	return ret;
 }
 
 static int ksz8_r_sta_mac_table(struct ksz_device *dev, u16 addr,
@@ -1193,28 +1228,28 @@ void ksz8_flush_dyn_mac_table(struct ksz_device *dev, int port)
 int ksz8_fdb_dump(struct ksz_device *dev, int port,
 		  dsa_fdb_dump_cb_t *cb, void *data)
 {
-	int ret = 0;
-	u16 i = 0;
-	u16 entries = 0;
-	u8 timestamp = 0;
-	u8 fid;
-	u8 src_port;
 	u8 mac[ETH_ALEN];
+	u8 src_port, fid;
+	u16 entries = 0;
+	int ret, i;
 
-	do {
+	for (i = 0; i < KSZ8_DYN_MAC_ENTRIES; i++) {
 		ret = ksz8_r_dyn_mac_table(dev, i, mac, &fid, &src_port,
-					   &timestamp, &entries);
-		if (!ret && port == src_port) {
+					   &entries);
+		if (ret)
+			return ret;
+
+		if (i >= entries)
+			return 0;
+
+		if (port == src_port) {
 			ret = cb(mac, fid, false, data);
 			if (ret)
-				break;
+				return ret;
 		}
-		i++;
-	} while (i < entries);
-	if (i >= entries)
-		ret = 0;
+	}
 
-	return ret;
+	return 0;
 }
 
 static int ksz8_add_sta_mac(struct ksz_device *dev, int port,
@@ -1512,6 +1547,7 @@ void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 {
 	struct dsa_switch *ds = dev->ds;
 	const u32 *masks;
+	int queues;
 	u8 member;
 
 	masks = dev->info->masks;
@@ -1519,19 +1555,20 @@ void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 	/* enable broadcast storm limit */
 	ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true);
 
-	if (!ksz_is_ksz88x3(dev))
-		ksz8795_set_prio_queue(dev, port, 4);
+	/* For KSZ88x3 enable only one queue by default, otherwise we won't
+	 * be able to get rid of PCP prios on Port 2.
+	 */
+	if (ksz_is_ksz88x3(dev))
+		queues = 1;
+	else
+		queues = dev->info->num_tx_queues;
 
-	/* disable DiffServ priority */
-	ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_ENABLE, false);
+	ksz8_port_queue_split(dev, port, queues);
 
 	/* replace priority */
 	ksz_port_cfg(dev, port, P_802_1P_CTRL,
 		     masks[PORT_802_1P_REMAPPING], false);
 
-	/* enable 802.1p priority */
-	ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_ENABLE, true);
-
 	if (cpu_port)
 		member = dsa_user_ports(ds);
 	else
@@ -1701,11 +1738,15 @@ static void ksz8_cpu_port_link_up(struct ksz_device *dev, int speed, int duplex,
 		 SW_10_MBIT, ctrl);
 }
 
-void ksz8_phylink_mac_link_up(struct ksz_device *dev, int port,
-			      unsigned int mode, phy_interface_t interface,
-			      struct phy_device *phydev, int speed, int duplex,
+void ksz8_phylink_mac_link_up(struct phylink_config *config,
+			      struct phy_device *phydev, unsigned int mode,
+			      phy_interface_t interface, int speed, int duplex,
 			      bool tx_pause, bool rx_pause)
 {
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct ksz_device *dev = dp->ds->priv;
+	int port = dp->index;
+
 	/* If the port is the CPU port, apply special handling. Only the CPU
 	 * port is configured via global registers.
 	 */
diff --git a/drivers/net/dsa/microchip/ksz8795_reg.h b/drivers/net/dsa/microchip/ksz8795_reg.h
index 7c9341ef73b0..69566a5d9cda 100644
--- a/drivers/net/dsa/microchip/ksz8795_reg.h
+++ b/drivers/net/dsa/microchip/ksz8795_reg.h
@@ -124,7 +124,8 @@
 #define PORT_BASED_PRIO_3		3
 #define PORT_INSERT_TAG			BIT(2)
 #define PORT_REMOVE_TAG			BIT(1)
-#define PORT_QUEUE_SPLIT_L		BIT(0)
+#define KSZ8795_PORT_2QUEUE_SPLIT_EN	BIT(0)
+#define KSZ8873_PORT_4QUEUE_SPLIT_EN	BIT(0)
 
 #define REG_PORT_1_CTRL_1		0x11
 #define REG_PORT_2_CTRL_1		0x21
@@ -143,6 +144,7 @@
 #define REG_PORT_4_CTRL_2		0x42
 #define REG_PORT_5_CTRL_2		0x52
 
+#define KSZ8873_PORT_2QUEUE_SPLIT_EN	BIT(7)
 #define PORT_INGRESS_FILTER		BIT(6)
 #define PORT_DISCARD_NON_VID		BIT(5)
 #define PORT_FORCE_FLOW_CTRL		BIT(4)
@@ -463,10 +465,7 @@
 #define REG_PORT_4_CTRL_13		0xE1
 #define REG_PORT_5_CTRL_13		0xF1
 
-#define PORT_QUEUE_SPLIT_H		BIT(1)
-#define PORT_QUEUE_SPLIT_1		0
-#define PORT_QUEUE_SPLIT_2		1
-#define PORT_QUEUE_SPLIT_4		2
+#define KSZ8795_PORT_4QUEUE_SPLIT_EN	BIT(1)
 #define PORT_DROP_TAG			BIT(0)
 
 #define REG_PORT_1_CTRL_14		0xB2
@@ -794,5 +793,6 @@
 #define TAIL_TAG_LOOKUP			BIT(7)
 
 #define FID_ENTRIES			128
+#define KSZ8_DYN_MAC_ENTRIES		1024
 
 #endif
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index 7f745628c84d..f8ad7833f5d9 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -1158,18 +1158,12 @@ void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
 	/* enable broadcast storm limit */
 	ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true);
 
-	/* disable DiffServ priority */
-	ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_PRIO_ENABLE, false);
-
 	/* replace priority */
 	ksz_port_cfg(dev, port, REG_PORT_MRI_MAC_CTRL, PORT_USER_PRIO_CEILING,
 		     false);
 	ksz9477_port_cfg32(dev, port, REG_PORT_MTI_QUEUE_CTRL_0__4,
 			   MTI_PVID_REPLACE, false);
 
-	/* enable 802.1p priority */
-	ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true);
-
 	/* force flow control for non-PHY ports only */
 	ksz_port_cfg(dev, port, REG_PORT_CTRL_0,
 		     PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL,
diff --git a/drivers/net/dsa/microchip/ksz9477_tc_flower.c b/drivers/net/dsa/microchip/ksz9477_tc_flower.c
index 8b2f5be667e0..ca7830ab168a 100644
--- a/drivers/net/dsa/microchip/ksz9477_tc_flower.c
+++ b/drivers/net/dsa/microchip/ksz9477_tc_flower.c
@@ -124,6 +124,9 @@ static int ksz9477_flower_parse_key(struct ksz_device *dev, int port,
 		return -EOPNOTSUPP;
 	}
 
+	if (flow_rule_match_has_control_flags(rule, extack))
+		return -EOPNOTSUPP;
+
 	if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_BASIC) ||
 	    flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ETH_ADDRS)) {
 		ret = ksz9477_flower_parse_key_l2(dev, port, extack, rule,
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 2b510f150dd8..1e0085cd9a9a 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -24,10 +24,12 @@
 #include <linux/of_net.h>
 #include <linux/micrel_phy.h>
 #include <net/dsa.h>
+#include <net/ieee8021q.h>
 #include <net/pkt_cls.h>
 #include <net/switchdev.h>
 
 #include "ksz_common.h"
+#include "ksz_dcb.h"
 #include "ksz_ptp.h"
 #include "ksz8.h"
 #include "ksz9477.h"
@@ -253,6 +255,28 @@ static const struct ksz_drive_strength ksz8830_drive_strengths[] = {
 	{ KSZ8873_DRIVE_STRENGTH_16MA, 16000 },
 };
 
+static void ksz8830_phylink_mac_config(struct phylink_config *config,
+				       unsigned int mode,
+				       const struct phylink_link_state *state);
+static void ksz_phylink_mac_config(struct phylink_config *config,
+				   unsigned int mode,
+				   const struct phylink_link_state *state);
+static void ksz_phylink_mac_link_down(struct phylink_config *config,
+				      unsigned int mode,
+				      phy_interface_t interface);
+
+static const struct phylink_mac_ops ksz8830_phylink_mac_ops = {
+	.mac_config	= ksz8830_phylink_mac_config,
+	.mac_link_down	= ksz_phylink_mac_link_down,
+	.mac_link_up	= ksz8_phylink_mac_link_up,
+};
+
+static const struct phylink_mac_ops ksz8_phylink_mac_ops = {
+	.mac_config	= ksz_phylink_mac_config,
+	.mac_link_down	= ksz_phylink_mac_link_down,
+	.mac_link_up	= ksz8_phylink_mac_link_up,
+};
+
 static const struct ksz_dev_ops ksz8_dev_ops = {
 	.setup = ksz8_setup,
 	.get_port_addr = ksz8_get_port_addr,
@@ -277,7 +301,6 @@ static const struct ksz_dev_ops ksz8_dev_ops = {
 	.mirror_add = ksz8_port_mirror_add,
 	.mirror_del = ksz8_port_mirror_del,
 	.get_caps = ksz8_get_caps,
-	.phylink_mac_link_up = ksz8_phylink_mac_link_up,
 	.config_cpu_port = ksz8_config_cpu_port,
 	.enable_stp_addr = ksz8_enable_stp_addr,
 	.reset = ksz8_reset_switch,
@@ -286,13 +309,19 @@ static const struct ksz_dev_ops ksz8_dev_ops = {
 	.change_mtu = ksz8_change_mtu,
 };
 
-static void ksz9477_phylink_mac_link_up(struct ksz_device *dev, int port,
+static void ksz9477_phylink_mac_link_up(struct phylink_config *config,
+					struct phy_device *phydev,
 					unsigned int mode,
 					phy_interface_t interface,
-					struct phy_device *phydev, int speed,
-					int duplex, bool tx_pause,
+					int speed, int duplex, bool tx_pause,
 					bool rx_pause);
 
+static const struct phylink_mac_ops ksz9477_phylink_mac_ops = {
+	.mac_config	= ksz_phylink_mac_config,
+	.mac_link_down	= ksz_phylink_mac_link_down,
+	.mac_link_up	= ksz9477_phylink_mac_link_up,
+};
+
 static const struct ksz_dev_ops ksz9477_dev_ops = {
 	.setup = ksz9477_setup,
 	.get_port_addr = ksz9477_get_port_addr,
@@ -319,7 +348,6 @@ static const struct ksz_dev_ops ksz9477_dev_ops = {
 	.mdb_add = ksz9477_mdb_add,
 	.mdb_del = ksz9477_mdb_del,
 	.change_mtu = ksz9477_change_mtu,
-	.phylink_mac_link_up = ksz9477_phylink_mac_link_up,
 	.get_wol = ksz9477_get_wol,
 	.set_wol = ksz9477_set_wol,
 	.wol_pre_shutdown = ksz9477_wol_pre_shutdown,
@@ -331,6 +359,12 @@ static const struct ksz_dev_ops ksz9477_dev_ops = {
 	.exit = ksz9477_switch_exit,
 };
 
+static const struct phylink_mac_ops lan937x_phylink_mac_ops = {
+	.mac_config	= ksz_phylink_mac_config,
+	.mac_link_down	= ksz_phylink_mac_link_down,
+	.mac_link_up	= ksz9477_phylink_mac_link_up,
+};
+
 static const struct ksz_dev_ops lan937x_dev_ops = {
 	.setup = lan937x_setup,
 	.teardown = lan937x_teardown,
@@ -359,7 +393,6 @@ static const struct ksz_dev_ops lan937x_dev_ops = {
 	.mdb_add = ksz9477_mdb_add,
 	.mdb_del = ksz9477_mdb_del,
 	.change_mtu = lan937x_change_mtu,
-	.phylink_mac_link_up = ksz9477_phylink_mac_link_up,
 	.config_cpu_port = lan937x_config_cpu_port,
 	.tc_cbs_set_cinc = lan937x_tc_cbs_set_cinc,
 	.enable_stp_addr = ksz9477_enable_stp_addr,
@@ -1194,9 +1227,10 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.port_cnt = 3,		/* total port count */
 		.port_nirqs = 3,
 		.num_tx_queues = 4,
+		.num_ipms = 8,
 		.tc_cbs_supported = true,
-		.tc_ets_supported = true,
 		.ops = &ksz9477_dev_ops,
+		.phylink_mac_ops = &ksz9477_phylink_mac_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
 		.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1223,7 +1257,9 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.cpu_ports = 0x10,	/* can be configured as cpu port */
 		.port_cnt = 5,		/* total cpu and user ports */
 		.num_tx_queues = 4,
+		.num_ipms = 4,
 		.ops = &ksz8_dev_ops,
+		.phylink_mac_ops = &ksz8_phylink_mac_ops,
 		.ksz87xx_eee_link_erratum = true,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
@@ -1262,7 +1298,9 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.cpu_ports = 0x10,	/* can be configured as cpu port */
 		.port_cnt = 5,		/* total cpu and user ports */
 		.num_tx_queues = 4,
+		.num_ipms = 4,
 		.ops = &ksz8_dev_ops,
+		.phylink_mac_ops = &ksz8_phylink_mac_ops,
 		.ksz87xx_eee_link_erratum = true,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
@@ -1287,7 +1325,9 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.cpu_ports = 0x10,	/* can be configured as cpu port */
 		.port_cnt = 5,		/* total cpu and user ports */
 		.num_tx_queues = 4,
+		.num_ipms = 4,
 		.ops = &ksz8_dev_ops,
+		.phylink_mac_ops = &ksz8_phylink_mac_ops,
 		.ksz87xx_eee_link_erratum = true,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
@@ -1312,7 +1352,9 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.cpu_ports = 0x4,	/* can be configured as cpu port */
 		.port_cnt = 3,
 		.num_tx_queues = 4,
+		.num_ipms = 4,
 		.ops = &ksz8_dev_ops,
+		.phylink_mac_ops = &ksz8830_phylink_mac_ops,
 		.mib_names = ksz88xx_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz88xx_mib_names),
 		.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1336,9 +1378,10 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.port_cnt = 7,		/* total physical port count */
 		.port_nirqs = 4,
 		.num_tx_queues = 4,
+		.num_ipms = 8,
 		.tc_cbs_supported = true,
-		.tc_ets_supported = true,
 		.ops = &ksz9477_dev_ops,
+		.phylink_mac_ops = &ksz9477_phylink_mac_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
 		.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1370,7 +1413,9 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.port_cnt = 6,		/* total physical port count */
 		.port_nirqs = 2,
 		.num_tx_queues = 4,
+		.num_ipms = 8,
 		.ops = &ksz9477_dev_ops,
+		.phylink_mac_ops = &ksz9477_phylink_mac_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
 		.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1402,7 +1447,9 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.port_cnt = 7,		/* total physical port count */
 		.port_nirqs = 2,
 		.num_tx_queues = 4,
+		.num_ipms = 8,
 		.ops = &ksz9477_dev_ops,
+		.phylink_mac_ops = &ksz9477_phylink_mac_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
 		.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1432,7 +1479,9 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.port_cnt = 3,		/* total port count */
 		.port_nirqs = 2,
 		.num_tx_queues = 4,
+		.num_ipms = 8,
 		.ops = &ksz9477_dev_ops,
+		.phylink_mac_ops = &ksz9477_phylink_mac_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
 		.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1458,9 +1507,10 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.port_cnt = 3,		/* total port count */
 		.port_nirqs = 3,
 		.num_tx_queues = 4,
+		.num_ipms = 8,
 		.tc_cbs_supported = true,
-		.tc_ets_supported = true,
 		.ops = &ksz9477_dev_ops,
+		.phylink_mac_ops = &ksz9477_phylink_mac_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
 		.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1486,9 +1536,10 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.port_cnt = 7,		/* total port count */
 		.port_nirqs = 3,
 		.num_tx_queues = 4,
+		.num_ipms = 8,
 		.tc_cbs_supported = true,
-		.tc_ets_supported = true,
 		.ops = &ksz9477_dev_ops,
+		.phylink_mac_ops = &ksz9477_phylink_mac_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
 		.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1519,8 +1570,8 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.port_cnt = 7,		/* total physical port count */
 		.port_nirqs = 3,
 		.num_tx_queues = 4,
+		.num_ipms = 8,
 		.tc_cbs_supported = true,
-		.tc_ets_supported = true,
 		.ops = &ksz9477_dev_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
@@ -1551,9 +1602,10 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.port_cnt = 5,		/* total physical port count */
 		.port_nirqs = 6,
 		.num_tx_queues = 8,
+		.num_ipms = 8,
 		.tc_cbs_supported = true,
-		.tc_ets_supported = true,
 		.ops = &lan937x_dev_ops,
+		.phylink_mac_ops = &lan937x_phylink_mac_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
 		.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1578,9 +1630,10 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.port_cnt = 6,		/* total physical port count */
 		.port_nirqs = 6,
 		.num_tx_queues = 8,
+		.num_ipms = 8,
 		.tc_cbs_supported = true,
-		.tc_ets_supported = true,
 		.ops = &lan937x_dev_ops,
+		.phylink_mac_ops = &lan937x_phylink_mac_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
 		.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1605,9 +1658,10 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.port_cnt = 8,		/* total physical port count */
 		.port_nirqs = 6,
 		.num_tx_queues = 8,
+		.num_ipms = 8,
 		.tc_cbs_supported = true,
-		.tc_ets_supported = true,
 		.ops = &lan937x_dev_ops,
+		.phylink_mac_ops = &lan937x_phylink_mac_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
 		.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1636,9 +1690,10 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.port_cnt = 5,		/* total physical port count */
 		.port_nirqs = 6,
 		.num_tx_queues = 8,
+		.num_ipms = 8,
 		.tc_cbs_supported = true,
-		.tc_ets_supported = true,
 		.ops = &lan937x_dev_ops,
+		.phylink_mac_ops = &lan937x_phylink_mac_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
 		.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1667,9 +1722,10 @@ const struct ksz_chip_data ksz_switch_chips[] = {
 		.port_cnt = 8,		/* total physical port count */
 		.port_nirqs = 6,
 		.num_tx_queues = 8,
+		.num_ipms = 8,
 		.tc_cbs_supported = true,
-		.tc_ets_supported = true,
 		.ops = &lan937x_dev_ops,
+		.phylink_mac_ops = &lan937x_phylink_mac_ops,
 		.mib_names = ksz9477_mib_names,
 		.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
 		.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -2304,6 +2360,7 @@ static int ksz_setup(struct dsa_switch *ds)
 	ksz_init_mib_timer(dev);
 
 	ds->configure_vlan_while_not_filtering = false;
+	ds->dscp_prio_mapping_is_global = true;
 
 	if (dev->dev_ops->setup) {
 		ret = dev->dev_ops->setup(ds);
@@ -2347,6 +2404,10 @@ static int ksz_setup(struct dsa_switch *ds)
 		goto out_ptp_clock_unregister;
 	}
 
+	ret = ksz_dcb_init(dev);
+	if (ret)
+		goto out_ptp_clock_unregister;
+
 	/* start switch */
 	regmap_update_bits(ksz_regmap_8(dev), regs[S_START_CTRL],
 			   SW_START, SW_START);
@@ -2523,14 +2584,15 @@ static u32 ksz_get_phy_flags(struct dsa_switch *ds, int port)
 	return 0;
 }
 
-static void ksz_mac_link_down(struct dsa_switch *ds, int port,
-			      unsigned int mode, phy_interface_t interface)
+static void ksz_phylink_mac_link_down(struct phylink_config *config,
+				      unsigned int mode,
+				      phy_interface_t interface)
 {
-	struct ksz_device *dev = ds->priv;
-	struct ksz_port *p = &dev->ports[port];
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct ksz_device *dev = dp->ds->priv;
 
 	/* Read all MIB counters when the link is going down. */
-	p->read = true;
+	dev->ports[dp->index].read = true;
 	/* timer started */
 	if (dev->mib_read_interval)
 		schedule_delayed_work(&dev->mib_read, 0);
@@ -2660,9 +2722,33 @@ static int ksz_port_mdb_del(struct dsa_switch *ds, int port,
 	return dev->dev_ops->mdb_del(dev, port, mdb, db);
 }
 
+static int ksz9477_set_default_prio_queue_mapping(struct ksz_device *dev,
+						  int port)
+{
+	u32 queue_map = 0;
+	int ipm;
+
+	for (ipm = 0; ipm < dev->info->num_ipms; ipm++) {
+		int queue;
+
+		/* Traffic Type (TT) is corresponding to the Internal Priority
+		 * Map (IPM) in the switch. Traffic Class (TC) is
+		 * corresponding to the queue in the switch.
+		 */
+		queue = ieee8021q_tt_to_tc(ipm, dev->info->num_tx_queues);
+		if (queue < 0)
+			return queue;
+
+		queue_map |= queue << (ipm * KSZ9477_PORT_TC_MAP_S);
+	}
+
+	return ksz_pwrite32(dev, port, KSZ9477_PORT_MRI_TC_MAP__4, queue_map);
+}
+
 static int ksz_port_setup(struct dsa_switch *ds, int port)
 {
 	struct ksz_device *dev = ds->priv;
+	int ret;
 
 	if (!dsa_is_user_port(ds, port))
 		return 0;
@@ -2670,11 +2756,17 @@ static int ksz_port_setup(struct dsa_switch *ds, int port)
 	/* setup user port */
 	dev->dev_ops->port_setup(dev, port, false);
 
+	if (!is_ksz8(dev)) {
+		ret = ksz9477_set_default_prio_queue_mapping(dev, port);
+		if (ret)
+			return ret;
+	}
+
 	/* port_stp_state_set() will be called after to enable the port so
 	 * there is no need to do anything.
 	 */
 
-	return 0;
+	return ksz_dcb_init_port(dev, port);
 }
 
 void ksz_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
@@ -3065,16 +3157,23 @@ phy_interface_t ksz_get_xmii(struct ksz_device *dev, int port, bool gbit)
 	return interface;
 }
 
-static void ksz_phylink_mac_config(struct dsa_switch *ds, int port,
+static void ksz8830_phylink_mac_config(struct phylink_config *config,
+				       unsigned int mode,
+				       const struct phylink_link_state *state)
+{
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct ksz_device *dev = dp->ds->priv;
+
+	dev->ports[dp->index].manual_flow = !(state->pause & MLO_PAUSE_AN);
+}
+
+static void ksz_phylink_mac_config(struct phylink_config *config,
 				   unsigned int mode,
 				   const struct phylink_link_state *state)
 {
-	struct ksz_device *dev = ds->priv;
-
-	if (ksz_is_ksz88x3(dev)) {
-		dev->ports[port].manual_flow = !(state->pause & MLO_PAUSE_AN);
-		return;
-	}
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct ksz_device *dev = dp->ds->priv;
+	int port = dp->index;
 
 	/* Internal PHYs */
 	if (dev->info->internal_phy[port])
@@ -3087,9 +3186,6 @@ static void ksz_phylink_mac_config(struct dsa_switch *ds, int port,
 
 	ksz_set_xmii(dev, port, state->interface);
 
-	if (dev->dev_ops->phylink_mac_config)
-		dev->dev_ops->phylink_mac_config(dev, port, mode, state);
-
 	if (dev->dev_ops->setup_rgmii_delay)
 		dev->dev_ops->setup_rgmii_delay(dev, port);
 }
@@ -3187,13 +3283,16 @@ static void ksz_duplex_flowctrl(struct ksz_device *dev, int port, int duplex,
 	ksz_prmw8(dev, port, regs[P_XMII_CTRL_0], mask, val);
 }
 
-static void ksz9477_phylink_mac_link_up(struct ksz_device *dev, int port,
+static void ksz9477_phylink_mac_link_up(struct phylink_config *config,
+					struct phy_device *phydev,
 					unsigned int mode,
 					phy_interface_t interface,
-					struct phy_device *phydev, int speed,
-					int duplex, bool tx_pause,
+					int speed, int duplex, bool tx_pause,
 					bool rx_pause)
 {
+	struct dsa_port *dp = dsa_phylink_to_port(config);
+	struct ksz_device *dev = dp->ds->priv;
+	int port = dp->index;
 	struct ksz_port *p;
 
 	p = &dev->ports[port];
@@ -3209,18 +3308,6 @@ static void ksz9477_phylink_mac_link_up(struct ksz_device *dev, int port,
 	ksz_duplex_flowctrl(dev, port, duplex, tx_pause, rx_pause);
 }
 
-static void ksz_phylink_mac_link_up(struct dsa_switch *ds, int port,
-				    unsigned int mode,
-				    phy_interface_t interface,
-				    struct phy_device *phydev, int speed,
-				    int duplex, bool tx_pause, bool rx_pause)
-{
-	struct ksz_device *dev = ds->priv;
-
-	dev->dev_ops->phylink_mac_link_up(dev, port, mode, interface, phydev,
-					  speed, duplex, tx_pause, rx_pause);
-}
-
 static int ksz_switch_detect(struct ksz_device *dev)
 {
 	u8 id1, id2, id4;
@@ -3522,7 +3609,7 @@ static int ksz_tc_ets_add(struct ksz_device *dev, int port,
 	for (tc_prio = 0; tc_prio < ARRAY_SIZE(p->priomap); tc_prio++) {
 		int queue;
 
-		if (tc_prio > KSZ9477_MAX_TC_PRIO)
+		if (tc_prio >= dev->info->num_ipms)
 			break;
 
 		queue = ksz_ets_band_to_queue(p, p->priomap[tc_prio]);
@@ -3534,8 +3621,7 @@ static int ksz_tc_ets_add(struct ksz_device *dev, int port,
 
 static int ksz_tc_ets_del(struct ksz_device *dev, int port)
 {
-	int ret, queue, tc_prio, s;
-	u32 queue_map = 0;
+	int ret, queue;
 
 	/* To restore the default chip configuration, set all queues to use the
 	 * WRR scheduler with a weight of 1.
@@ -3547,31 +3633,10 @@ static int ksz_tc_ets_del(struct ksz_device *dev, int port)
 			return ret;
 	}
 
-	switch (dev->info->num_tx_queues) {
-	case 2:
-		s = 2;
-		break;
-	case 4:
-		s = 1;
-		break;
-	case 8:
-		s = 0;
-		break;
-	default:
-		return -EINVAL;
-	}
-
 	/* Revert the queue mapping for TC-priority to its default setting on
 	 * the chip.
 	 */
-	for (tc_prio = 0; tc_prio <= KSZ9477_MAX_TC_PRIO; tc_prio++) {
-		int queue;
-
-		queue = tc_prio >> s;
-		queue_map |= queue << (tc_prio * KSZ9477_PORT_TC_MAP_S);
-	}
-
-	return ksz_pwrite32(dev, port, KSZ9477_PORT_MRI_TC_MAP__4, queue_map);
+	return ksz9477_set_default_prio_queue_mapping(dev, port);
 }
 
 static int ksz_tc_ets_validate(struct ksz_device *dev, int port,
@@ -3616,7 +3681,7 @@ static int ksz_tc_setup_qdisc_ets(struct dsa_switch *ds, int port,
 	struct ksz_device *dev = ds->priv;
 	int ret;
 
-	if (!dev->info->tc_ets_supported)
+	if (is_ksz8(dev))
 		return -EOPNOTSUPP;
 
 	if (qopt->parent != TC_H_ROOT) {
@@ -3881,9 +3946,6 @@ static const struct dsa_switch_ops ksz_switch_ops = {
 	.phy_read		= ksz_phy_read16,
 	.phy_write		= ksz_phy_write16,
 	.phylink_get_caps	= ksz_phylink_get_caps,
-	.phylink_mac_config	= ksz_phylink_mac_config,
-	.phylink_mac_link_up	= ksz_phylink_mac_link_up,
-	.phylink_mac_link_down	= ksz_mac_link_down,
 	.port_setup		= ksz_port_setup,
 	.set_ageing_time	= ksz_set_ageing_time,
 	.get_strings		= ksz_get_strings,
@@ -3925,6 +3987,13 @@ static const struct dsa_switch_ops ksz_switch_ops = {
 	.port_setup_tc		= ksz_setup_tc,
 	.get_mac_eee		= ksz_get_mac_eee,
 	.set_mac_eee		= ksz_set_mac_eee,
+	.port_get_default_prio	= ksz_port_get_default_prio,
+	.port_set_default_prio	= ksz_port_set_default_prio,
+	.port_get_dscp_prio	= ksz_port_get_dscp_prio,
+	.port_add_dscp_prio	= ksz_port_add_dscp_prio,
+	.port_del_dscp_prio	= ksz_port_del_dscp_prio,
+	.port_get_apptrust	= ksz_port_get_apptrust,
+	.port_set_apptrust	= ksz_port_set_apptrust,
 };
 
 struct ksz_device *ksz_switch_alloc(struct device *base, void *priv)
@@ -4328,6 +4397,9 @@ int ksz_switch_register(struct ksz_device *dev)
 	/* set the real number of ports */
 	dev->ds->num_ports = dev->info->port_cnt;
 
+	/* set the phylink ops */
+	dev->ds->phylink_mac_ops = dev->info->phylink_mac_ops;
+
 	/* Host port interface will be self detected, or specifically set in
 	 * device tree.
 	 */
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index 40c11b0d6b62..c784fd23a993 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -19,9 +19,13 @@
 #include "ksz_ptp.h"
 
 #define KSZ_MAX_NUM_PORTS 8
+/* all KSZ switches count ports from 1 */
+#define KSZ_PORT_1 0
+#define KSZ_PORT_2 1
 
 struct ksz_device;
 struct ksz_port;
+struct phylink_mac_ops;
 
 enum ksz_regmap_width {
 	KSZ_REGMAP_8,
@@ -58,9 +62,10 @@ struct ksz_chip_data {
 	int port_cnt;
 	u8 port_nirqs;
 	u8 num_tx_queues;
+	u8 num_ipms; /* number of Internal Priority Maps */
 	bool tc_cbs_supported;
-	bool tc_ets_supported;
 	const struct ksz_dev_ops *ops;
+	const struct phylink_mac_ops *phylink_mac_ops;
 	bool ksz87xx_eee_link_erratum;
 	const struct ksz_mib_names *mib_names;
 	int mib_cnt;
@@ -349,9 +354,6 @@ struct ksz_dev_ops {
 	int (*change_mtu)(struct ksz_device *dev, int port, int mtu);
 	void (*freeze_mib)(struct ksz_device *dev, int port, bool freeze);
 	void (*port_init_cnt)(struct ksz_device *dev, int port);
-	void (*phylink_mac_config)(struct ksz_device *dev, int port,
-				   unsigned int mode,
-				   const struct phylink_link_state *state);
 	void (*phylink_mac_link_up)(struct ksz_device *dev, int port,
 				    unsigned int mode,
 				    phy_interface_t interface,
@@ -620,6 +622,11 @@ static inline bool ksz_is_ksz88x3(struct ksz_device *dev)
 	return dev->chip_id == KSZ8830_CHIP_ID;
 }
 
+static inline bool is_ksz8(struct ksz_device *dev)
+{
+	return ksz_is_ksz87xx(dev) || ksz_is_ksz88x3(dev);
+}
+
 static inline int is_lan937x(struct ksz_device *dev)
 {
 	return dev->chip_id == LAN9370_CHIP_ID ||
@@ -722,7 +729,6 @@ static inline int is_lan937x(struct ksz_device *dev)
 #define KSZ9477_PORT_MRI_TC_MAP__4	0x0808
 
 #define KSZ9477_PORT_TC_MAP_S		4
-#define KSZ9477_MAX_TC_PRIO		7
 
 /* CBS related registers */
 #define REG_PORT_MTI_QUEUE_INDEX__4	0x0900
diff --git a/drivers/net/dsa/microchip/ksz_dcb.c b/drivers/net/dsa/microchip/ksz_dcb.c
new file mode 100644
index 000000000000..a97106327562
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz_dcb.c
@@ -0,0 +1,809 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2024 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
+
+#include <linux/dsa/ksz_common.h>
+#include <net/dsa.h>
+#include <net/dscp.h>
+#include <net/ieee8021q.h>
+
+#include "ksz_common.h"
+#include "ksz_dcb.h"
+#include "ksz8.h"
+
+#define KSZ8_REG_PORT_1_CTRL_0			0x10
+#define KSZ8_PORT_DIFFSERV_ENABLE		BIT(6)
+#define KSZ8_PORT_802_1P_ENABLE			BIT(5)
+#define KSZ8_PORT_BASED_PRIO_M			GENMASK(4, 3)
+
+#define KSZ88X3_REG_TOS_DSCP_CTRL		0x60
+#define KSZ8765_REG_TOS_DSCP_CTRL		0x90
+
+#define KSZ9477_REG_SW_MAC_TOS_CTRL		0x033e
+#define KSZ9477_SW_TOS_DSCP_REMAP		BIT(0)
+#define KSZ9477_SW_TOS_DSCP_DEFAULT_PRIO_M	GENMASK(5, 3)
+
+#define KSZ9477_REG_DIFFSERV_PRIO_MAP		0x0340
+
+#define KSZ9477_REG_PORT_MRI_PRIO_CTRL		0x0801
+#define KSZ9477_PORT_HIGHEST_PRIO		BIT(7)
+#define KSZ9477_PORT_OR_PRIO			BIT(6)
+#define KSZ9477_PORT_MAC_PRIO_ENABLE		BIT(4)
+#define KSZ9477_PORT_VLAN_PRIO_ENABLE		BIT(3)
+#define KSZ9477_PORT_802_1P_PRIO_ENABLE		BIT(2)
+#define KSZ9477_PORT_DIFFSERV_PRIO_ENABLE	BIT(1)
+#define KSZ9477_PORT_ACL_PRIO_ENABLE		BIT(0)
+
+#define KSZ9477_REG_PORT_MRI_MAC_CTRL		0x0802
+#define KSZ9477_PORT_BASED_PRIO_M		GENMASK(2, 0)
+
+struct ksz_apptrust_map {
+	u8 apptrust;
+	u8 bit;
+};
+
+static const struct ksz_apptrust_map ksz8_apptrust_map_to_bit[] = {
+	{ DCB_APP_SEL_PCP, KSZ8_PORT_802_1P_ENABLE },
+	{ IEEE_8021QAZ_APP_SEL_DSCP, KSZ8_PORT_DIFFSERV_ENABLE },
+};
+
+static const struct ksz_apptrust_map ksz9477_apptrust_map_to_bit[] = {
+	{ DCB_APP_SEL_PCP, KSZ9477_PORT_802_1P_PRIO_ENABLE },
+	{ IEEE_8021QAZ_APP_SEL_DSCP, KSZ9477_PORT_DIFFSERV_PRIO_ENABLE },
+};
+
+/* ksz_supported_apptrust[] - Supported apptrust selectors and Priority Order
+ *			      of Internal Priority Map (IPM) sources.
+ *
+ * This array defines the apptrust selectors supported by the hardware, where
+ * the index within the array indicates the priority of the selector - lower
+ * indices correspond to higher priority. This fixed priority scheme is due to
+ * the hardware's design, which does not support configurable priority among
+ * different priority sources.
+ *
+ * The priority sources, including Tail Tag, ACL, VLAN PCP and DSCP are ordered
+ * by the hardware's fixed logic, as detailed below. The order reflects a
+ * non-configurable precedence where certain types of priority information
+ * override others:
+ *
+ * 1. Tail Tag - Highest priority, overrides ACL, VLAN PCP, and DSCP priorities.
+ * 2. ACL - Overrides VLAN PCP and DSCP priorities.
+ * 3. VLAN PCP - Overrides DSCP priority.
+ * 4. DSCP - Lowest priority, does not override any other priority source.
+ *
+ * In this context, the array's lower index (higher priority) for
+ * 'DCB_APP_SEL_PCP' suggests its relative priority over
+ * 'IEEE_8021QAZ_APP_SEL_DSCP' within the system's fixed priority scheme.
+ *
+ * DCB_APP_SEL_PCP - Priority Code Point selector
+ * IEEE_8021QAZ_APP_SEL_DSCP - Differentiated Services Code Point selector
+ */
+static const u8 ksz_supported_apptrust[] = {
+	DCB_APP_SEL_PCP,
+	IEEE_8021QAZ_APP_SEL_DSCP,
+};
+
+static const char * const ksz_supported_apptrust_variants[] = {
+	"empty", "dscp", "pcp", "dscp pcp"
+};
+
+static void ksz_get_default_port_prio_reg(struct ksz_device *dev, int *reg,
+					  u8 *mask, int *shift)
+{
+	if (is_ksz8(dev)) {
+		*reg = KSZ8_REG_PORT_1_CTRL_0;
+		*mask = KSZ8_PORT_BASED_PRIO_M;
+		*shift = __bf_shf(KSZ8_PORT_BASED_PRIO_M);
+	} else {
+		*reg = KSZ9477_REG_PORT_MRI_MAC_CTRL;
+		*mask = KSZ9477_PORT_BASED_PRIO_M;
+		*shift = __bf_shf(KSZ9477_PORT_BASED_PRIO_M);
+	}
+}
+
+/**
+ * ksz_get_dscp_prio_reg - Retrieves the DSCP-to-priority-mapping register
+ * @dev: Pointer to the KSZ switch device structure
+ * @reg: Pointer to the register address to be set
+ * @per_reg: Pointer to the number of DSCP values per register
+ * @mask: Pointer to the mask to be set
+ *
+ * This function retrieves the DSCP to priority mapping register, the number of
+ * DSCP values per register, and the mask to be set.
+ */
+static void ksz_get_dscp_prio_reg(struct ksz_device *dev, int *reg,
+				  int *per_reg, u8 *mask)
+{
+	if (ksz_is_ksz87xx(dev)) {
+		*reg = KSZ8765_REG_TOS_DSCP_CTRL;
+		*per_reg = 4;
+		*mask = GENMASK(1, 0);
+	} else if (ksz_is_ksz88x3(dev)) {
+		*reg = KSZ88X3_REG_TOS_DSCP_CTRL;
+		*per_reg = 4;
+		*mask = GENMASK(1, 0);
+	} else {
+		*reg = KSZ9477_REG_DIFFSERV_PRIO_MAP;
+		*per_reg = 2;
+		*mask = GENMASK(2, 0);
+	}
+}
+
+/**
+ * ksz_get_apptrust_map_and_reg - Retrieves the apptrust map and register
+ * @dev: Pointer to the KSZ switch device structure
+ * @map: Pointer to the apptrust map to be set
+ * @reg: Pointer to the register address to be set
+ * @mask: Pointer to the mask to be set
+ *
+ * This function retrieves the apptrust map and register address for the
+ * apptrust configuration.
+ */
+static void ksz_get_apptrust_map_and_reg(struct ksz_device *dev,
+					 const struct ksz_apptrust_map **map,
+					 int *reg, u8 *mask)
+{
+	if (is_ksz8(dev)) {
+		*map = ksz8_apptrust_map_to_bit;
+		*reg = KSZ8_REG_PORT_1_CTRL_0;
+		*mask = KSZ8_PORT_DIFFSERV_ENABLE | KSZ8_PORT_802_1P_ENABLE;
+	} else {
+		*map = ksz9477_apptrust_map_to_bit;
+		*reg = KSZ9477_REG_PORT_MRI_PRIO_CTRL;
+		*mask = KSZ9477_PORT_802_1P_PRIO_ENABLE |
+			KSZ9477_PORT_DIFFSERV_PRIO_ENABLE;
+	}
+}
+
+/**
+ * ksz_port_get_default_prio - Retrieves the default priority for a port on a
+ *			       KSZ switch
+ * @ds: Pointer to the DSA switch structure
+ * @port: Port number from which to get the default priority
+ *
+ * This function fetches the default priority for the specified port on a KSZ
+ * switch.
+ *
+ * Return: The default priority of the port on success, or a negative error
+ * code on failure.
+ */
+int ksz_port_get_default_prio(struct dsa_switch *ds, int port)
+{
+	struct ksz_device *dev = ds->priv;
+	int ret, reg, shift;
+	u8 data, mask;
+
+	ksz_get_default_port_prio_reg(dev, &reg, &mask, &shift);
+
+	ret = ksz_pread8(dev, port, reg, &data);
+	if (ret)
+		return ret;
+
+	return (data & mask) >> shift;
+}
+
+/**
+ * ksz88x3_port_set_default_prio_quirks - Quirks for default priority
+ * @dev: Pointer to the KSZ switch device structure
+ * @port: Port number for which to set the default priority
+ * @prio: Priority value to set
+ *
+ * This function implements quirks for setting the default priority on KSZ88x3
+ * devices. On Port 2, no other priority providers are working
+ * except of PCP. So, configuring default priority on Port 2 is not possible.
+ * On Port 1, it is not possible to configure port priority if PCP
+ * apptrust on Port 2 is disabled. Since we disable multiple queues on the
+ * switch to disable PCP on Port 2, we need to ensure that the default priority
+ * configuration on Port 1 is in agreement with the configuration on Port 2.
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+static int ksz88x3_port_set_default_prio_quirks(struct ksz_device *dev, int port,
+						u8 prio)
+{
+	if (!prio)
+		return 0;
+
+	if (port == KSZ_PORT_2) {
+		dev_err(dev->dev, "Port priority configuration is not working on Port 2\n");
+		return -EINVAL;
+	} else if (port == KSZ_PORT_1) {
+		u8 port2_data;
+		int ret;
+
+		ret = ksz_pread8(dev, KSZ_PORT_2, KSZ8_REG_PORT_1_CTRL_0,
+				 &port2_data);
+		if (ret)
+			return ret;
+
+		if (!(port2_data & KSZ8_PORT_802_1P_ENABLE)) {
+			dev_err(dev->dev, "Not possible to configure port priority on Port 1 if PCP apptrust on Port 2 is disabled\n");
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * ksz_port_set_default_prio - Sets the default priority for a port on a KSZ
+ *			       switch
+ * @ds: Pointer to the DSA switch structure
+ * @port: Port number for which to set the default priority
+ * @prio: Priority value to set
+ *
+ * This function sets the default priority for the specified port on a KSZ
+ * switch.
+ *
+ * Return: 0 on success, or a negative error code on failure.
+ */
+int ksz_port_set_default_prio(struct dsa_switch *ds, int port, u8 prio)
+{
+	struct ksz_device *dev = ds->priv;
+	int reg, shift, ret;
+	u8 mask;
+
+	if (prio >= dev->info->num_ipms)
+		return -EINVAL;
+
+	if (ksz_is_ksz88x3(dev)) {
+		ret = ksz88x3_port_set_default_prio_quirks(dev, port, prio);
+		if (ret)
+			return ret;
+	}
+
+	ksz_get_default_port_prio_reg(dev, &reg, &mask, &shift);
+
+	return ksz_prmw8(dev, port, reg, mask, (prio << shift) & mask);
+}
+
+/**
+ * ksz_port_get_dscp_prio - Retrieves the priority for a DSCP value on a KSZ
+ *			    switch
+ * @ds: Pointer to the DSA switch structure
+ * @port: Port number for which to get the priority
+ * @dscp: DSCP value for which to get the priority
+ *
+ * This function fetches the priority value from switch global DSCP-to-priorty
+ * mapping table for the specified DSCP value.
+ *
+ * Return: The priority value for the DSCP on success, or a negative error
+ * code on failure.
+ */
+int ksz_port_get_dscp_prio(struct dsa_switch *ds, int port, u8 dscp)
+{
+	struct ksz_device *dev = ds->priv;
+	int reg, per_reg, ret, shift;
+	u8 data, mask;
+
+	ksz_get_dscp_prio_reg(dev, &reg, &per_reg, &mask);
+
+	/* If DSCP remapping is disabled, DSCP bits 3-5 are used as Internal
+	 * Priority Map (IPM)
+	 */
+	if (!is_ksz8(dev)) {
+		ret = ksz_read8(dev, KSZ9477_REG_SW_MAC_TOS_CTRL, &data);
+		if (ret)
+			return ret;
+
+		/* If DSCP remapping is disabled, DSCP bits 3-5 are used as
+		 * Internal Priority Map (IPM)
+		 */
+		if (!(data & KSZ9477_SW_TOS_DSCP_REMAP))
+			return FIELD_GET(KSZ9477_SW_TOS_DSCP_DEFAULT_PRIO_M,
+					 dscp);
+	}
+
+	/* In case DSCP remapping is enabled, we need to write the DSCP to
+	 * priority mapping table.
+	 */
+	reg += dscp / per_reg;
+	ret = ksz_read8(dev, reg, &data);
+	if (ret)
+		return ret;
+
+	shift = (dscp % per_reg) * (8 / per_reg);
+
+	return (data >> shift) & mask;
+}
+
+/**
+ * ksz_set_global_dscp_entry - Sets the global DSCP-to-priority mapping entry
+ * @dev: Pointer to the KSZ switch device structure
+ * @dscp: DSCP value for which to set the priority
+ * @ipm: Priority value to set
+ *
+ * This function sets the global DSCP-to-priority mapping entry for the
+ * specified DSCP value.
+ *
+ * Return: 0 on success, or a negative error code on failure.
+ */
+static int ksz_set_global_dscp_entry(struct ksz_device *dev, u8 dscp, u8 ipm)
+{
+	int reg, per_reg, shift;
+	u8 mask;
+
+	ksz_get_dscp_prio_reg(dev, &reg, &per_reg, &mask);
+
+	shift = (dscp % per_reg) * (8 / per_reg);
+
+	return ksz_rmw8(dev, reg + (dscp / per_reg), mask << shift,
+			ipm << shift);
+}
+
+/**
+ * ksz_init_global_dscp_map - Initializes the global DSCP-to-priority mapping
+ * @dev: Pointer to the KSZ switch device structure
+ *
+ * This function initializes the global DSCP-to-priority mapping table for the
+ * switch.
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+static int ksz_init_global_dscp_map(struct ksz_device *dev)
+{
+	int ret, dscp;
+
+	/* On KSZ9xxx variants, DSCP remapping is disabled by default.
+	 * Enable to have, predictable and reproducible behavior across
+	 * different devices.
+	 */
+	if (!is_ksz8(dev)) {
+		ret = ksz_rmw8(dev, KSZ9477_REG_SW_MAC_TOS_CTRL,
+			       KSZ9477_SW_TOS_DSCP_REMAP,
+			       KSZ9477_SW_TOS_DSCP_REMAP);
+		if (ret)
+			return ret;
+	}
+
+	for (dscp = 0; dscp < DSCP_MAX; dscp++) {
+		int ipm, tt;
+
+		/* Map DSCP to Traffic Type, which is corresponding to the
+		 * Internal Priority Map (IPM) in the switch.
+		 */
+		if (!is_ksz8(dev)) {
+			ipm = ietf_dscp_to_ieee8021q_tt(dscp);
+		} else {
+			/* On KSZ8xxx variants we do not have IPM to queue
+			 * remapping table. We need to convert DSCP to Traffic
+			 * Type and then to queue.
+			 */
+			tt = ietf_dscp_to_ieee8021q_tt(dscp);
+			if (tt < 0)
+				return tt;
+
+			ipm = ieee8021q_tt_to_tc(tt, dev->info->num_tx_queues);
+		}
+
+		if (ipm < 0)
+			return ipm;
+
+		ret = ksz_set_global_dscp_entry(dev, dscp, ipm);
+	}
+
+	return 0;
+}
+
+/**
+ * ksz_port_add_dscp_prio - Adds a DSCP-to-priority mapping entry for a port on
+ *			    a KSZ switch.
+ * @ds: Pointer to the DSA switch structure
+ * @port: Port number for which to add the DSCP-to-priority mapping entry
+ * @dscp: DSCP value for which to add the priority
+ * @prio: Priority value to set
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+int ksz_port_add_dscp_prio(struct dsa_switch *ds, int port, u8 dscp, u8 prio)
+{
+	struct ksz_device *dev = ds->priv;
+
+	if (prio >= dev->info->num_ipms)
+		return -ERANGE;
+
+	return ksz_set_global_dscp_entry(dev, dscp, prio);
+}
+
+/**
+ * ksz_port_del_dscp_prio - Deletes a DSCP-to-priority mapping entry for a port
+ *			    on a KSZ switch.
+ * @ds: Pointer to the DSA switch structure
+ * @port: Port number for which to delete the DSCP-to-priority mapping entry
+ * @dscp: DSCP value for which to delete the priority
+ * @prio: Priority value to delete
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+int ksz_port_del_dscp_prio(struct dsa_switch *ds, int port, u8 dscp, u8 prio)
+{
+	struct ksz_device *dev = ds->priv;
+	int ipm;
+
+	if (ksz_port_get_dscp_prio(ds, port, dscp) != prio)
+		return 0;
+
+	if (is_ksz8(dev)) {
+		ipm = ieee8021q_tt_to_tc(IEEE8021Q_TT_BE,
+					 dev->info->num_tx_queues);
+		if (ipm < 0)
+			return ipm;
+	} else {
+		ipm = IEEE8021Q_TT_BE;
+	}
+
+	return ksz_set_global_dscp_entry(dev, dscp, ipm);
+}
+
+/**
+ * ksz_apptrust_error - Prints an error message for an invalid apptrust selector
+ * @dev: Pointer to the KSZ switch device structure
+ *
+ * This function prints an error message when an invalid apptrust selector is
+ * provided.
+ */
+static void ksz_apptrust_error(struct ksz_device *dev)
+{
+	char supported_apptrust_variants[64];
+	int i;
+
+	supported_apptrust_variants[0] = '\0';
+	for (i = 0; i < ARRAY_SIZE(ksz_supported_apptrust_variants); i++) {
+		if (i > 0)
+			strlcat(supported_apptrust_variants, ", ",
+				sizeof(supported_apptrust_variants));
+		strlcat(supported_apptrust_variants,
+			ksz_supported_apptrust_variants[i],
+			sizeof(supported_apptrust_variants));
+	}
+
+	dev_err(dev->dev, "Invalid apptrust selector or priority order. Supported: %s\n",
+		supported_apptrust_variants);
+}
+
+/**
+ * ksz_port_set_apptrust_validate - Validates the apptrust selectors
+ * @dev: Pointer to the KSZ switch device structure
+ * @port: Port number for which to set the apptrust selectors
+ * @sel: Array of apptrust selectors to validate
+ * @nsel: Number of apptrust selectors in the array
+ *
+ * This function validates the apptrust selectors provided and ensures that
+ * they are in the correct order.
+ *
+ * This family of switches supports two apptrust selectors: DCB_APP_SEL_PCP and
+ * IEEE_8021QAZ_APP_SEL_DSCP. The priority order of the selectors is fixed and
+ * cannot be changed. The order is as follows:
+ * 1. DCB_APP_SEL_PCP - Priority Code Point selector (highest priority)
+ * 2. IEEE_8021QAZ_APP_SEL_DSCP - Differentiated Services Code Point selector
+ *   (lowest priority)
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+static int ksz_port_set_apptrust_validate(struct ksz_device *dev, int port,
+					  const u8 *sel, int nsel)
+{
+	int i, j, found;
+	int j_prev = 0;
+
+	/* Iterate through the requested selectors */
+	for (i = 0; i < nsel; i++) {
+		found = 0;
+
+		/* Check if the current selector is supported by the hardware */
+		for (j = 0; j < sizeof(ksz_supported_apptrust); j++) {
+			if (sel[i] != ksz_supported_apptrust[j])
+				continue;
+
+			found = 1;
+
+			/* Ensure that no higher priority selector (lower index)
+			 * precedes a lower priority one
+			 */
+			if (i > 0 && j <= j_prev)
+				goto err_sel_not_vaild;
+
+			j_prev = j;
+			break;
+		}
+
+		if (!found)
+			goto err_sel_not_vaild;
+	}
+
+	return 0;
+
+err_sel_not_vaild:
+	ksz_apptrust_error(dev);
+
+	return -EINVAL;
+}
+
+/**
+ * ksz88x3_port1_apptrust_quirk - Quirk for apptrust configuration on Port 1
+ *				  of KSZ88x3 devices
+ * @dev: Pointer to the KSZ switch device structure
+ * @port: Port number for which to set the apptrust selectors
+ * @reg: Register address for the apptrust configuration
+ * @port1_data: Data to set for the apptrust configuration
+ *
+ * This function implements a quirk for apptrust configuration on Port 1 of
+ * KSZ88x3 devices. It ensures that apptrust configuration on Port 1 is not
+ * possible if PCP apptrust on Port 2 is disabled. This is because the Port 2
+ * seems to be permanently hardwired to PCP classification, so we need to
+ * do Port 1 configuration always in agreement with Port 2 configuration.
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+static int ksz88x3_port1_apptrust_quirk(struct ksz_device *dev, int port,
+					int reg, u8 port1_data)
+{
+	u8 port2_data;
+	int ret;
+
+	/* If no apptrust is requested for Port 1, no need to care about Port 2
+	 * configuration.
+	 */
+	if (!(port1_data & (KSZ8_PORT_802_1P_ENABLE | KSZ8_PORT_DIFFSERV_ENABLE)))
+		return 0;
+
+	/* We got request to enable any apptrust on Port 1. To make it possible,
+	 * we need to enable multiple queues on the switch. If we enable
+	 * multiqueue support, PCP classification on Port 2 will be
+	 * automatically activated by HW.
+	 */
+	ret = ksz_pread8(dev, KSZ_PORT_2, reg, &port2_data);
+	if (ret)
+		return ret;
+
+	/* If KSZ8_PORT_802_1P_ENABLE bit is set on Port 2, the driver showed
+	 * the interest in PCP classification on Port 2. In this case,
+	 * multiqueue support is enabled and we can enable any apptrust on
+	 * Port 1.
+	 * If KSZ8_PORT_802_1P_ENABLE bit is not set on Port 2, the PCP
+	 * classification on Port 2 is still active, but the driver disabled
+	 * multiqueue support and made frame prioritization inactive for
+	 * all ports. In this case, we can't enable any apptrust on Port 1.
+	 */
+	if (!(port2_data & KSZ8_PORT_802_1P_ENABLE)) {
+		dev_err(dev->dev, "Not possible to enable any apptrust on Port 1 if PCP apptrust on Port 2 is disabled\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/**
+ * ksz88x3_port2_apptrust_quirk - Quirk for apptrust configuration on Port 2
+ *				  of KSZ88x3 devices
+ * @dev: Pointer to the KSZ switch device structure
+ * @port: Port number for which to set the apptrust selectors
+ * @reg: Register address for the apptrust configuration
+ * @port2_data: Data to set for the apptrust configuration
+ *
+ * This function implements a quirk for apptrust configuration on Port 2 of
+ * KSZ88x3 devices. It ensures that DSCP apptrust is not working on Port 2 and
+ * that it is not possible to disable PCP on Port 2. The only way to disable PCP
+ * on Port 2 is to disable multiple queues on the switch.
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+static int ksz88x3_port2_apptrust_quirk(struct ksz_device *dev, int port,
+					int reg, u8 port2_data)
+{
+	struct dsa_switch *ds = dev->ds;
+	u8 port1_data;
+	int ret;
+
+	/* First validate Port 2 configuration. DiffServ/DSCP is not working
+	 * on this port.
+	 */
+	if (port2_data & KSZ8_PORT_DIFFSERV_ENABLE) {
+		dev_err(dev->dev, "DSCP apptrust is not working on Port 2\n");
+		return -EINVAL;
+	}
+
+	/* If PCP support is requested, we need to enable all queues on the
+	 * switch to make PCP priority working on Port 2.
+	 */
+	if (port2_data & KSZ8_PORT_802_1P_ENABLE)
+		return ksz8_all_queues_split(dev, dev->info->num_tx_queues);
+
+	/* We got request to disable PCP priority on Port 2.
+	 * Now, we need to compare Port 2 configuration with Port 1
+	 * configuration.
+	 */
+	ret = ksz_pread8(dev, KSZ_PORT_1, reg, &port1_data);
+	if (ret)
+		return ret;
+
+	/* If Port 1 has any apptrust enabled, we can't disable multiple queues
+	 * on the switch, so we can't disable PCP on Port 2.
+	 */
+	if (port1_data & (KSZ8_PORT_802_1P_ENABLE | KSZ8_PORT_DIFFSERV_ENABLE)) {
+		dev_err(dev->dev, "Not possible to disable PCP on Port 2 if any apptrust is enabled on Port 1\n");
+		return -EINVAL;
+	}
+
+	/* Now we need to ensure that default priority on Port 1 is set to 0
+	 * otherwise we can't disable multiqueue support on the switch.
+	 */
+	ret = ksz_port_get_default_prio(ds, KSZ_PORT_1);
+	if (ret < 0) {
+		return ret;
+	} else if (ret) {
+		dev_err(dev->dev, "Not possible to disable PCP on Port 2 if non zero default priority is set on Port 1\n");
+		return -EINVAL;
+	}
+
+	/* Port 1 has no apptrust or default priority set and we got request to
+	 * disable PCP on Port 2. We can disable multiqueue support to disable
+	 * PCP on Port 2.
+	 */
+	return ksz8_all_queues_split(dev, 1);
+}
+
+/**
+ * ksz88x3_port_apptrust_quirk - Quirk for apptrust configuration on KSZ88x3
+ *			       devices
+ * @dev: Pointer to the KSZ switch device structure
+ * @port: Port number for which to set the apptrust selectors
+ * @reg: Register address for the apptrust configuration
+ * @data: Data to set for the apptrust configuration
+ *
+ * This function implements a quirk for apptrust configuration on KSZ88x3
+ * devices. It ensures that apptrust configuration on Port 1 and
+ * Port 2 is done in agreement with each other.
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+static int ksz88x3_port_apptrust_quirk(struct ksz_device *dev, int port,
+				       int reg, u8 data)
+{
+	if (port == KSZ_PORT_1)
+		return ksz88x3_port1_apptrust_quirk(dev, port, reg, data);
+	else if (port == KSZ_PORT_2)
+		return ksz88x3_port2_apptrust_quirk(dev, port, reg, data);
+
+	return 0;
+}
+
+/**
+ * ksz_port_set_apptrust - Sets the apptrust selectors for a port on a KSZ
+ *			   switch
+ * @ds: Pointer to the DSA switch structure
+ * @port: Port number for which to set the apptrust selectors
+ * @sel: Array of apptrust selectors to set
+ * @nsel: Number of apptrust selectors in the array
+ *
+ * This function sets the apptrust selectors for the specified port on a KSZ
+ * switch.
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+int ksz_port_set_apptrust(struct dsa_switch *ds, int port,
+			  const u8 *sel, int nsel)
+{
+	const struct ksz_apptrust_map *map;
+	struct ksz_device *dev = ds->priv;
+	int reg, i, ret;
+	u8 data = 0;
+	u8 mask;
+
+	ret = ksz_port_set_apptrust_validate(dev, port, sel, nsel);
+	if (ret)
+		return ret;
+
+	ksz_get_apptrust_map_and_reg(dev, &map, &reg, &mask);
+
+	for (i = 0; i < nsel; i++) {
+		int j;
+
+		for (j = 0; j < ARRAY_SIZE(ksz_supported_apptrust); j++) {
+			if (sel[i] != ksz_supported_apptrust[j])
+				continue;
+
+			data |= map[j].bit;
+			break;
+		}
+	}
+
+	if (ksz_is_ksz88x3(dev)) {
+		ret = ksz88x3_port_apptrust_quirk(dev, port, reg, data);
+		if (ret)
+			return ret;
+	}
+
+	return ksz_prmw8(dev, port, reg, mask, data);
+}
+
+/**
+ * ksz_port_get_apptrust - Retrieves the apptrust selectors for a port on a KSZ
+ *			   switch
+ * @ds: Pointer to the DSA switch structure
+ * @port: Port number for which to get the apptrust selectors
+ * @sel: Array to store the apptrust selectors
+ * @nsel: Number of apptrust selectors in the array
+ *
+ * This function fetches the apptrust selectors for the specified port on a KSZ
+ * switch.
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+int ksz_port_get_apptrust(struct dsa_switch *ds, int port, u8 *sel, int *nsel)
+{
+	const struct ksz_apptrust_map *map;
+	struct ksz_device *dev = ds->priv;
+	int reg, i, ret;
+	u8 data;
+	u8 mask;
+
+	ksz_get_apptrust_map_and_reg(dev, &map, &reg, &mask);
+
+	ret = ksz_pread8(dev, port, reg, &data);
+	if (ret)
+		return ret;
+
+	*nsel = 0;
+	for (i = 0; i < ARRAY_SIZE(ksz_supported_apptrust); i++) {
+		if (data & map[i].bit)
+			sel[(*nsel)++] = ksz_supported_apptrust[i];
+	}
+
+	return 0;
+}
+
+/**
+ * ksz_dcb_init_port - Initializes the DCB configuration for a port on a KSZ
+ * @dev: Pointer to the KSZ switch device structure
+ * @port: Port number for which to initialize the DCB configuration
+ *
+ * This function initializes the DCB configuration for the specified port on a
+ * KSZ switch. Particular DCB configuration is set for the port, including the
+ * default priority and apptrust selectors.
+ * The default priority is set to Best Effort, and the apptrust selectors are
+ * set to all supported selectors.
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+int ksz_dcb_init_port(struct ksz_device *dev, int port)
+{
+	const u8 ksz_default_apptrust[] = { DCB_APP_SEL_PCP };
+	int ret, ipm;
+
+	if (is_ksz8(dev)) {
+		ipm = ieee8021q_tt_to_tc(IEEE8021Q_TT_BE,
+					 dev->info->num_tx_queues);
+		if (ipm < 0)
+			return ipm;
+	} else {
+		ipm = IEEE8021Q_TT_BE;
+	}
+
+	/* Set the default priority for the port to Best Effort */
+	ret = ksz_port_set_default_prio(dev->ds, port, ipm);
+	if (ret)
+		return ret;
+
+	return ksz_port_set_apptrust(dev->ds, port, ksz_default_apptrust,
+				     ARRAY_SIZE(ksz_default_apptrust));
+}
+
+/**
+ * ksz_dcb_init - Initializes the DCB configuration for a KSZ switch
+ * @dev: Pointer to the KSZ switch device structure
+ *
+ * This function initializes the DCB configuration for a KSZ switch. The global
+ * DSCP-to-priority mapping table is initialized.
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+int ksz_dcb_init(struct ksz_device *dev)
+{
+	int ret;
+
+	ret = ksz_init_global_dscp_map(dev);
+	if (ret)
+		return ret;
+
+	return 0;
+}
diff --git a/drivers/net/dsa/microchip/ksz_dcb.h b/drivers/net/dsa/microchip/ksz_dcb.h
new file mode 100644
index 000000000000..e2065223ba90
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz_dcb.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2024 Pengutronix, Oleksij Rempel <kernel@pengutronix.de> */
+
+#ifndef __KSZ_DCB_H
+#define __KSZ_DCB_H
+
+#include <net/dsa.h>
+
+#include "ksz_common.h"
+
+int ksz_port_get_default_prio(struct dsa_switch *ds, int port);
+int ksz_port_set_default_prio(struct dsa_switch *ds, int port, u8 prio);
+int ksz_port_get_dscp_prio(struct dsa_switch *ds, int port, u8 dscp);
+int ksz_port_add_dscp_prio(struct dsa_switch *ds, int port, u8 dscp, u8 prio);
+int ksz_port_del_dscp_prio(struct dsa_switch *ds, int port, u8 dscp, u8 prio);
+int ksz_port_set_apptrust(struct dsa_switch *ds, int port,
+			  const unsigned char *sel,
+			  int nsel);
+int ksz_port_get_apptrust(struct dsa_switch *ds, int port, u8 *sel, int *nsel);
+int ksz_dcb_init_port(struct ksz_device *dev, int port);
+int ksz_dcb_init(struct ksz_device *dev);
+
+#endif /* __KSZ_DCB_H */
diff --git a/drivers/net/dsa/microchip/ksz_spi.c b/drivers/net/dsa/microchip/ksz_spi.c
index c8166fb440ab..8e8d83213b04 100644
--- a/drivers/net/dsa/microchip/ksz_spi.c
+++ b/drivers/net/dsa/microchip/ksz_spi.c
@@ -222,7 +222,6 @@ MODULE_DEVICE_TABLE(spi, ksz_spi_ids);
 static struct spi_driver ksz_spi_driver = {
 	.driver = {
 		.name	= "ksz-switch",
-		.owner	= THIS_MODULE,
 		.of_match_table = ksz_dt_ids,
 	},
 	.id_table = ksz_spi_ids,
@@ -233,13 +232,6 @@ static struct spi_driver ksz_spi_driver = {
 
 module_spi_driver(ksz_spi_driver);
 
-MODULE_ALIAS("spi:ksz9477");
-MODULE_ALIAS("spi:ksz9896");
-MODULE_ALIAS("spi:ksz9897");
-MODULE_ALIAS("spi:ksz9893");
-MODULE_ALIAS("spi:ksz9563");
-MODULE_ALIAS("spi:ksz8563");
-MODULE_ALIAS("spi:ksz9567");
 MODULE_ALIAS("spi:lan937x");
 MODULE_AUTHOR("Tristram Ha <Tristram.Ha@microchip.com>");
 MODULE_DESCRIPTION("Microchip ksz Series Switch SPI Driver");