Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.

 2) Support UDP segmentation in code TSO code, from Eric Dumazet.

 3) Allow flashing different flash images in cxgb4 driver, from Vishal
    Kulkarni.

 4) Add drop frames counter and flow status to tc flower offloading,
    from Po Liu.

 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.

 6) Various new indirect call avoidance, from Eric Dumazet and Brian
    Vazquez.

 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
    Yonghong Song.

 8) Support querying and setting hardware address of a port function via
    devlink, use this in mlx5, from Parav Pandit.

 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.

10) Switch qca8k driver over to phylink, from Jonathan McDowell.

11) In bpftool, show list of processes holding BPF FD references to
    maps, programs, links, and btf objects. From Andrii Nakryiko.

12) Several conversions over to generic power management, from Vaibhav
    Gupta.

13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
    Yakunin.

14) Various https url conversions, from Alexander A. Klimov.

15) Timestamping and PHC support for mscc PHY driver, from Antoine
    Tenart.

16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.

17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.

18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.

19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
    drivers. From Luc Van Oostenryck.

20) XDP support for xen-netfront, from Denis Kirjanov.

21) Support receive buffer autotuning in MPTCP, from Florian Westphal.

22) Support EF100 chip in sfc driver, from Edward Cree.

23) Add XDP support to mvpp2 driver, from Matteo Croce.

24) Support MPTCP in sock_diag, from Paolo Abeni.

25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
    infrastructure, from Jakub Kicinski.

26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.

27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.

28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.

29) Refactor a lot of networking socket option handling code in order to
    avoid set_fs() calls, from Christoph Hellwig.

30) Add rfc4884 support to icmp code, from Willem de Bruijn.

31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.

32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.

33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.

34) Support TCP syncookies in MPTCP, from Flowian Westphal.

35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
    Brivio.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
  net: thunderx: initialize VF's mailbox mutex before first usage
  usb: hso: remove bogus check for EINPROGRESS
  usb: hso: no complaint about kmalloc failure
  hso: fix bailout in error case of probe
  ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
  selftests/net: relax cpu affinity requirement in msg_zerocopy test
  mptcp: be careful on subflow creation
  selftests: rtnetlink: make kci_test_encap() return sub-test result
  selftests: rtnetlink: correct the final return value for the test
  net: dsa: sja1105: use detected device id instead of DT one on mismatch
  tipc: set ub->ifindex for local ipv6 address
  ipv6: add ipv6_dev_find()
  net: openvswitch: silence suspicious RCU usage warning
  Revert "vxlan: fix tos value before xmit"
  ptp: only allow phase values lower than 1 period
  farsync: switch from 'pci_' to 'dma_' API
  wan: wanxl: switch from 'pci_' to 'dma_' API
  hv_netvsc: do not use VF device if link is down
  dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
  net: macb: Properly handle phylink on at91sam9x
  ...

1 files changed, 45 insertions, 0 deletions

diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h
index 42d6ea24eb14..7ca4b93e0bb5 100644
--- a/drivers/net/dsa/qca8k.h
+++ b/drivers/net/dsa/qca8k.h
@@ -13,6 +13,7 @@
 #include <linux/gpio.h>
 
 #define QCA8K_NUM_PORTS					7
+#define QCA8K_MAX_MTU					9000
 
 #define PHY_ID_QCA8337					0x004dd036
 #define QCA8K_ID_QCA8337				0x13
@@ -21,6 +22,8 @@
 
 #define QCA8K_CPU_PORT					0
 
+#define QCA8K_PORT_VID_DEF				1
+
 /* Global control registers */
 #define QCA8K_REG_MASK_CTRL				0x000
 #define   QCA8K_MASK_CTRL_ID_M				0xff
@@ -36,6 +39,8 @@
 #define   QCA8K_MAX_DELAY				3
 #define   QCA8K_PORT_PAD_RGMII_RX_DELAY_EN		BIT(24)
 #define   QCA8K_PORT_PAD_SGMII_EN			BIT(7)
+#define QCA8K_REG_PWS					0x010
+#define   QCA8K_PWS_SERDES_AEN_DIS			BIT(7)
 #define QCA8K_REG_MODULE_EN				0x030
 #define   QCA8K_MODULE_EN_MIB				BIT(0)
 #define QCA8K_REG_MIB					0x034
@@ -56,6 +61,7 @@
 #define   QCA8K_MDIO_MASTER_MAX_REG			32
 #define QCA8K_GOL_MAC_ADDR0				0x60
 #define QCA8K_GOL_MAC_ADDR1				0x64
+#define QCA8K_MAX_FRAME_SIZE				0x78
 #define QCA8K_REG_PORT_STATUS(_i)			(0x07c + (_i) * 4)
 #define   QCA8K_PORT_STATUS_SPEED			GENMASK(1, 0)
 #define   QCA8K_PORT_STATUS_SPEED_10			0
@@ -69,6 +75,7 @@
 #define   QCA8K_PORT_STATUS_LINK_UP			BIT(8)
 #define   QCA8K_PORT_STATUS_LINK_AUTO			BIT(9)
 #define   QCA8K_PORT_STATUS_LINK_PAUSE			BIT(10)
+#define   QCA8K_PORT_STATUS_FLOW_AUTO			BIT(12)
 #define QCA8K_REG_PORT_HDR_CTRL(_i)			(0x9c + (_i * 4))
 #define   QCA8K_PORT_HDR_CTRL_RX_MASK			GENMASK(3, 2)
 #define   QCA8K_PORT_HDR_CTRL_RX_S			2
@@ -77,6 +84,16 @@
 #define   QCA8K_PORT_HDR_CTRL_ALL			2
 #define   QCA8K_PORT_HDR_CTRL_MGMT			1
 #define   QCA8K_PORT_HDR_CTRL_NONE			0
+#define QCA8K_REG_SGMII_CTRL				0x0e0
+#define   QCA8K_SGMII_EN_PLL				BIT(1)
+#define   QCA8K_SGMII_EN_RX				BIT(2)
+#define   QCA8K_SGMII_EN_TX				BIT(3)
+#define   QCA8K_SGMII_EN_SD				BIT(4)
+#define   QCA8K_SGMII_CLK125M_DELAY			BIT(7)
+#define   QCA8K_SGMII_MODE_CTRL_MASK			(BIT(22) | BIT(23))
+#define   QCA8K_SGMII_MODE_CTRL_BASEX			(0 << 22)
+#define   QCA8K_SGMII_MODE_CTRL_PHY			(1 << 22)
+#define   QCA8K_SGMII_MODE_CTRL_MAC			(2 << 22)
 
 /* EEE control registers */
 #define QCA8K_REG_EEE_CTRL				0x100
@@ -111,6 +128,19 @@
 #define   QCA8K_ATU_FUNC_FULL				BIT(12)
 #define   QCA8K_ATU_FUNC_PORT_M				0xf
 #define   QCA8K_ATU_FUNC_PORT_S				8
+#define QCA8K_REG_VTU_FUNC0				0x610
+#define   QCA8K_VTU_FUNC0_VALID				BIT(20)
+#define   QCA8K_VTU_FUNC0_IVL_EN			BIT(19)
+#define   QCA8K_VTU_FUNC0_EG_MODE_S(_i)			(4 + (_i) * 2)
+#define   QCA8K_VTU_FUNC0_EG_MODE_MASK			3
+#define   QCA8K_VTU_FUNC0_EG_MODE_UNMOD			0
+#define   QCA8K_VTU_FUNC0_EG_MODE_UNTAG			1
+#define   QCA8K_VTU_FUNC0_EG_MODE_TAG			2
+#define   QCA8K_VTU_FUNC0_EG_MODE_NOT			3
+#define QCA8K_REG_VTU_FUNC1				0x614
+#define   QCA8K_VTU_FUNC1_BUSY				BIT(31)
+#define   QCA8K_VTU_FUNC1_VID_S				16
+#define   QCA8K_VTU_FUNC1_FULL				BIT(4)
 #define QCA8K_REG_GLOBAL_FW_CTRL0			0x620
 #define   QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN		BIT(10)
 #define QCA8K_REG_GLOBAL_FW_CTRL1			0x624
@@ -120,6 +150,11 @@
 #define   QCA8K_GLOBAL_FW_CTRL1_UC_DP_S			0
 #define QCA8K_PORT_LOOKUP_CTRL(_i)			(0x660 + (_i) * 0xc)
 #define   QCA8K_PORT_LOOKUP_MEMBER			GENMASK(6, 0)
+#define   QCA8K_PORT_LOOKUP_VLAN_MODE			GENMASK(9, 8)
+#define   QCA8K_PORT_LOOKUP_VLAN_MODE_NONE		(0 << 8)
+#define   QCA8K_PORT_LOOKUP_VLAN_MODE_FALLBACK		(1 << 8)
+#define   QCA8K_PORT_LOOKUP_VLAN_MODE_CHECK		(2 << 8)
+#define   QCA8K_PORT_LOOKUP_VLAN_MODE_SECURE		(3 << 8)
 #define   QCA8K_PORT_LOOKUP_STATE_MASK			GENMASK(18, 16)
 #define   QCA8K_PORT_LOOKUP_STATE_DISABLED		(0 << 16)
 #define   QCA8K_PORT_LOOKUP_STATE_BLOCKING		(1 << 16)
@@ -163,6 +198,15 @@ enum qca8k_fdb_cmd {
 	QCA8K_FDB_SEARCH = 7,
 };
 
+enum qca8k_vlan_cmd {
+	QCA8K_VLAN_FLUSH = 1,
+	QCA8K_VLAN_LOAD = 2,
+	QCA8K_VLAN_PURGE = 3,
+	QCA8K_VLAN_REMOVE_PORT = 4,
+	QCA8K_VLAN_NEXT = 5,
+	QCA8K_VLAN_READ = 6,
+};
+
 struct ar8xxx_port_status {
 	int enabled;
 };
@@ -176,6 +220,7 @@ struct qca8k_priv {
 	struct device *dev;
 	struct dsa_switch_ops ops;
 	struct gpio_desc *reset_gpio;
+	unsigned int port_mtu[QCA8K_NUM_PORTS];
 };
 
 struct qca8k_mib_desc {