Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 485 insertions, 0 deletions

diff --git a/drivers/net/e2100.c b/drivers/net/e2100.c
new file mode 100644
index 000000000000..51c9fa260830
--- /dev/null
+++ b/drivers/net/e2100.c
@@ -0,0 +1,485 @@
+/* e2100.c: A Cabletron E2100 series ethernet driver for linux. */
+/*
+	Written 1993-1994 by Donald Becker.
+
+	Copyright 1994 by Donald Becker.
+	Copyright 1993 United States Government as represented by the
+	Director, National Security Agency.  This software may be used and
+	distributed according to the terms of the GNU General Public License,
+	incorporated herein by reference.
+
+	This is a driver for the Cabletron E2100 series ethercards.
+
+	The Author may be reached as becker@scyld.com, or C/O
+	Scyld Computing Corporation
+	410 Severn Ave., Suite 210
+	Annapolis MD 21403
+
+	The E2100 series ethercard is a fairly generic shared memory 8390
+	implementation.  The only unusual aspect is the way the shared memory
+	registers are set: first you do an inb() in what is normally the
+	station address region, and the low three bits of next outb() *address*
+	is used	as the write value for that register.  Either someone wasn't
+	too used to dem bit en bites, or they were trying to obfuscate the
+	programming interface.
+
+	There is an additional complication when setting the window on the packet
+	buffer.  You must first do a read into the packet buffer region with the
+	low 8 address bits the address setting the page for the start of the packet
+	buffer window, and then do the above operation.  See mem_on() for details.
+
+	One bug on the chip is that even a hard reset won't disable the memory
+	window, usually resulting in a hung machine if mem_off() isn't called.
+	If this happens, you must power down the machine for about 30 seconds.
+*/
+
+static const char version[] =
+	"e2100.c:v1.01 7/21/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+#include <asm/system.h>
+
+#include "8390.h"
+
+#define DRV_NAME "e2100"
+
+static int e21_probe_list[] = {0x300, 0x280, 0x380, 0x220, 0};
+
+/* Offsets from the base_addr.
+   Read from the ASIC register, and the low three bits of the next outb()
+   address is used to set the corresponding register. */
+#define E21_NIC_OFFSET  0		/* Offset to the 8390 NIC. */
+#define E21_ASIC		0x10
+#define E21_MEM_ENABLE	0x10
+#define  E21_MEM_ON		0x05	/* Enable memory in 16 bit mode. */
+#define  E21_MEM_ON_8	0x07	/* Enable memory in  8 bit mode. */
+#define E21_MEM_BASE	0x11
+#define E21_IRQ_LOW		0x12	/* The low three bits of the IRQ number. */
+#define E21_IRQ_HIGH	0x14	/* The high IRQ bit and media select ...  */
+#define E21_MEDIA		0x14	/* (alias). */
+#define  E21_ALT_IFPORT 0x02	/* Set to use the other (BNC,AUI) port. */
+#define  E21_BIG_MEM	0x04	/* Use a bigger (64K) buffer (we don't) */
+#define E21_SAPROM		0x10	/* Offset to station address data. */
+#define E21_IO_EXTENT	 0x20
+
+static inline void mem_on(short port, volatile char __iomem *mem_base,
+						  unsigned char start_page )
+{
+	/* This is a little weird: set the shared memory window by doing a
+	   read.  The low address bits specify the starting page. */
+	readb(mem_base+start_page);
+	inb(port + E21_MEM_ENABLE);
+	outb(E21_MEM_ON, port + E21_MEM_ENABLE + E21_MEM_ON);
+}
+
+static inline void mem_off(short port)
+{
+	inb(port + E21_MEM_ENABLE);
+	outb(0x00, port + E21_MEM_ENABLE);
+}
+
+/* In other drivers I put the TX pages first, but the E2100 window circuitry
+   is designed to have a 4K Tx region last. The windowing circuitry wraps the
+   window at 0x2fff->0x0000 so that the packets at e.g. 0x2f00 in the RX ring
+   appear contiguously in the window. */
+#define E21_RX_START_PG		0x00	/* First page of RX buffer */
+#define E21_RX_STOP_PG		0x30	/* Last page +1 of RX ring */
+#define E21_BIG_RX_STOP_PG	0xF0	/* Last page +1 of RX ring */
+#define E21_TX_START_PG		E21_RX_STOP_PG	/* First page of TX buffer */
+
+static int e21_probe1(struct net_device *dev, int ioaddr);
+
+static int e21_open(struct net_device *dev);
+static void e21_reset_8390(struct net_device *dev);
+static void e21_block_input(struct net_device *dev, int count,
+						   struct sk_buff *skb, int ring_offset);
+static void e21_block_output(struct net_device *dev, int count,
+							 const unsigned char *buf, int start_page);
+static void e21_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
+							int ring_page);
+
+static int e21_close(struct net_device *dev);
+
+
+/*  Probe for the E2100 series ethercards.  These cards have an 8390 at the
+	base address and the station address at both offset 0x10 and 0x18.  I read
+	the station address from offset 0x18 to avoid the dataport of NE2000
+	ethercards, and look for Ctron's unique ID (first three octets of the
+	station address).
+ */
+
+static int  __init do_e2100_probe(struct net_device *dev)
+{
+	int *port;
+	int base_addr = dev->base_addr;
+	int irq = dev->irq;
+
+	SET_MODULE_OWNER(dev);
+
+	if (base_addr > 0x1ff)		/* Check a single specified location. */
+		return e21_probe1(dev, base_addr);
+	else if (base_addr != 0)	/* Don't probe at all. */
+		return -ENXIO;
+
+	for (port = e21_probe_list; *port; port++) {
+		dev->irq = irq;
+		if (e21_probe1(dev, *port) == 0)
+			return 0;
+	}
+
+	return -ENODEV;
+}
+
+static void cleanup_card(struct net_device *dev)
+{
+	/* NB: e21_close() handles free_irq */
+	iounmap(ei_status.mem);
+	release_region(dev->base_addr, E21_IO_EXTENT);
+}
+
+#ifndef MODULE
+struct net_device * __init e2100_probe(int unit)
+{
+	struct net_device *dev = alloc_ei_netdev();
+	int err;
+
+	if (!dev)
+		return ERR_PTR(-ENOMEM);
+
+	sprintf(dev->name, "eth%d", unit);
+	netdev_boot_setup_check(dev);
+
+	err = do_e2100_probe(dev);
+	if (err)
+		goto out;
+	err = register_netdev(dev);
+	if (err)
+		goto out1;
+	return dev;
+out1:
+	cleanup_card(dev);
+out:
+	free_netdev(dev);
+	return ERR_PTR(err);
+}
+#endif
+
+static int __init e21_probe1(struct net_device *dev, int ioaddr)
+{
+	int i, status, retval;
+	unsigned char *station_addr = dev->dev_addr;
+	static unsigned version_printed;
+
+	if (!request_region(ioaddr, E21_IO_EXTENT, DRV_NAME))
+		return -EBUSY;
+
+	/* First check the station address for the Ctron prefix. */
+	if (inb(ioaddr + E21_SAPROM + 0) != 0x00
+		|| inb(ioaddr + E21_SAPROM + 1) != 0x00
+		|| inb(ioaddr + E21_SAPROM + 2) != 0x1d) {
+		retval = -ENODEV;
+		goto out;
+	}
+
+	/* Verify by making certain that there is a 8390 at there. */
+	outb(E8390_NODMA + E8390_STOP, ioaddr);
+	udelay(1);	/* we want to delay one I/O cycle - which is 2MHz */
+	status = inb(ioaddr);
+	if (status != 0x21 && status != 0x23) {
+		retval = -ENODEV;
+		goto out;
+	}
+
+	/* Read the station address PROM.  */
+	for (i = 0; i < 6; i++)
+		station_addr[i] = inb(ioaddr + E21_SAPROM + i);
+
+	inb(ioaddr + E21_MEDIA); 		/* Point to media selection. */
+	outb(0, ioaddr + E21_ASIC); 	/* and disable the secondary interface. */
+
+	if (ei_debug  &&  version_printed++ == 0)
+		printk(version);
+
+	for (i = 0; i < 6; i++)
+		printk(" %02X", station_addr[i]);
+
+	if (dev->irq < 2) {
+		int irqlist[] = {15,11,10,12,5,9,3,4}, i;
+		for (i = 0; i < 8; i++)
+			if (request_irq (irqlist[i], NULL, 0, "bogus", NULL) != -EBUSY) {
+				dev->irq = irqlist[i];
+				break;
+			}
+		if (i >= 8) {
+			printk(" unable to get IRQ %d.\n", dev->irq);
+			retval = -EAGAIN;
+			goto out;
+		}
+	} else if (dev->irq == 2)	/* Fixup luser bogosity: IRQ2 is really IRQ9 */
+		dev->irq = 9;
+
+	/* The 8390 is at the base address. */
+	dev->base_addr = ioaddr;
+
+	ei_status.name = "E2100";
+	ei_status.word16 = 1;
+	ei_status.tx_start_page = E21_TX_START_PG;
+	ei_status.rx_start_page = E21_RX_START_PG;
+	ei_status.stop_page = E21_RX_STOP_PG;
+	ei_status.saved_irq = dev->irq;
+
+	/* Check the media port used.  The port can be passed in on the
+	   low mem_end bits. */
+	if (dev->mem_end & 15)
+		dev->if_port = dev->mem_end & 7;
+	else {
+		dev->if_port = 0;
+		inb(ioaddr + E21_MEDIA); 	/* Turn automatic media detection on. */
+		for(i = 0; i < 6; i++)
+			if (station_addr[i] != inb(ioaddr + E21_SAPROM + 8 + i)) {
+				dev->if_port = 1;
+				break;
+			}
+	}
+
+	/* Never map in the E21 shared memory unless you are actively using it.
+	   Also, the shared memory has effective only one setting -- spread all
+	   over the 128K region! */
+	if (dev->mem_start == 0)
+		dev->mem_start = 0xd0000;
+
+	ei_status.mem = ioremap(dev->mem_start, 2*1024);
+	if (!ei_status.mem) {
+		printk("unable to remap memory\n");
+		retval = -EAGAIN;
+		goto out;
+	}
+
+#ifdef notdef
+	/* These values are unused.  The E2100 has a 2K window into the packet
+	   buffer.  The window can be set to start on any page boundary. */
+	ei_status.rmem_start = dev->mem_start + TX_PAGES*256;
+	dev->mem_end = ei_status.rmem_end = dev->mem_start + 2*1024;
+#endif
+
+	printk(", IRQ %d, %s media, memory @ %#lx.\n", dev->irq,
+		   dev->if_port ? "secondary" : "primary", dev->mem_start);
+
+	ei_status.reset_8390 = &e21_reset_8390;
+	ei_status.block_input = &e21_block_input;
+	ei_status.block_output = &e21_block_output;
+	ei_status.get_8390_hdr = &e21_get_8390_hdr;
+	dev->open = &e21_open;
+	dev->stop = &e21_close;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	dev->poll_controller = ei_poll;
+#endif
+	NS8390_init(dev, 0);
+
+	return 0;
+out:
+	release_region(ioaddr, E21_IO_EXTENT);
+	return retval;
+}
+
+static int
+e21_open(struct net_device *dev)
+{
+	short ioaddr = dev->base_addr;
+	int retval;
+
+	if ((retval = request_irq(dev->irq, ei_interrupt, 0, dev->name, dev)))
+		return retval;
+
+	/* Set the interrupt line and memory base on the hardware. */
+	inb(ioaddr + E21_IRQ_LOW);
+	outb(0, ioaddr + E21_ASIC + (dev->irq & 7));
+	inb(ioaddr + E21_IRQ_HIGH); 			/* High IRQ bit, and if_port. */
+	outb(0, ioaddr + E21_ASIC + (dev->irq > 7 ? 1:0)
+		   + (dev->if_port ? E21_ALT_IFPORT : 0));
+	inb(ioaddr + E21_MEM_BASE);
+	outb(0, ioaddr + E21_ASIC + ((dev->mem_start >> 17) & 7));
+
+	ei_open(dev);
+	return 0;
+}
+
+static void
+e21_reset_8390(struct net_device *dev)
+{
+	short ioaddr = dev->base_addr;
+
+	outb(0x01, ioaddr);
+	if (ei_debug > 1) printk("resetting the E2180x3 t=%ld...", jiffies);
+	ei_status.txing = 0;
+
+	/* Set up the ASIC registers, just in case something changed them. */
+
+	if (ei_debug > 1) printk("reset done\n");
+	return;
+}
+
+/* Grab the 8390 specific header. We put the 2k window so the header page
+   appears at the start of the shared memory. */
+
+static void
+e21_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
+{
+
+	short ioaddr = dev->base_addr;
+	char __iomem *shared_mem = ei_status.mem;
+
+	mem_on(ioaddr, shared_mem, ring_page);
+
+#ifdef notdef
+	/* Officially this is what we are doing, but the readl() is faster */
+	memcpy_fromio(hdr, shared_mem, sizeof(struct e8390_pkt_hdr));
+#else
+	((unsigned int*)hdr)[0] = readl(shared_mem);
+#endif
+
+	/* Turn off memory access: we would need to reprogram the window anyway. */
+	mem_off(ioaddr);
+
+}
+
+/*  Block input and output are easy on shared memory ethercards.
+	The E21xx makes block_input() especially easy by wrapping the top
+	ring buffer to the bottom automatically. */
+static void
+e21_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
+{
+	short ioaddr = dev->base_addr;
+	char __iomem *shared_mem = ei_status.mem;
+
+	mem_on(ioaddr, shared_mem, (ring_offset>>8));
+
+	/* Packet is always in one chunk -- we can copy + cksum. */
+	eth_io_copy_and_sum(skb, ei_status.mem + (ring_offset & 0xff), count, 0);
+
+	mem_off(ioaddr);
+}
+
+static void
+e21_block_output(struct net_device *dev, int count, const unsigned char *buf,
+				 int start_page)
+{
+	short ioaddr = dev->base_addr;
+	volatile char __iomem *shared_mem = ei_status.mem;
+
+	/* Set the shared memory window start by doing a read, with the low address
+	   bits specifying the starting page. */
+	readb(shared_mem + start_page);
+	mem_on(ioaddr, shared_mem, start_page);
+
+	memcpy_toio(shared_mem, buf, count);
+	mem_off(ioaddr);
+}
+
+static int
+e21_close(struct net_device *dev)
+{
+	short ioaddr = dev->base_addr;
+
+	if (ei_debug > 1)
+		printk("%s: Shutting down ethercard.\n", dev->name);
+
+	free_irq(dev->irq, dev);
+	dev->irq = ei_status.saved_irq;
+
+	/* Shut off the interrupt line and secondary interface. */
+	inb(ioaddr + E21_IRQ_LOW);
+	outb(0, ioaddr + E21_ASIC);
+	inb(ioaddr + E21_IRQ_HIGH); 			/* High IRQ bit, and if_port. */
+	outb(0, ioaddr + E21_ASIC);
+
+	ei_close(dev);
+
+	/* Double-check that the memory has been turned off, because really
+	   really bad things happen if it isn't. */
+	mem_off(ioaddr);
+
+	return 0;
+}
+
+
+#ifdef MODULE
+#define MAX_E21_CARDS	4	/* Max number of E21 cards per module */
+static struct net_device *dev_e21[MAX_E21_CARDS];
+static int io[MAX_E21_CARDS];
+static int irq[MAX_E21_CARDS];
+static int mem[MAX_E21_CARDS];
+static int xcvr[MAX_E21_CARDS];		/* choose int. or ext. xcvr */
+
+module_param_array(io, int, NULL, 0);
+module_param_array(irq, int, NULL, 0);
+module_param_array(mem, int, NULL, 0);
+module_param_array(xcvr, int, NULL, 0);
+MODULE_PARM_DESC(io, "I/O base address(es)");
+MODULE_PARM_DESC(irq, "IRQ number(s)");
+MODULE_PARM_DESC(mem, " memory base address(es)");
+MODULE_PARM_DESC(xcvr, "transceiver(s) (0=internal, 1=external)");
+MODULE_DESCRIPTION("Cabletron E2100 ISA ethernet driver");
+MODULE_LICENSE("GPL");
+
+/* This is set up so that only a single autoprobe takes place per call.
+ISA device autoprobes on a running machine are not recommended. */
+int
+init_module(void)
+{
+	struct net_device *dev;
+	int this_dev, found = 0;
+
+	for (this_dev = 0; this_dev < MAX_E21_CARDS; this_dev++) {
+		if (io[this_dev] == 0)  {
+			if (this_dev != 0) break; /* only autoprobe 1st one */
+			printk(KERN_NOTICE "e2100.c: Presently autoprobing (not recommended) for a single card.\n");
+		}
+		dev = alloc_ei_netdev();
+		if (!dev)
+			break;
+		dev->irq = irq[this_dev];
+		dev->base_addr = io[this_dev];
+		dev->mem_start = mem[this_dev];
+		dev->mem_end = xcvr[this_dev];	/* low 4bits = xcvr sel. */
+		if (do_e2100_probe(dev) == 0) {
+			if (register_netdev(dev) == 0) {
+				dev_e21[found++] = dev;
+				continue;
+			}
+			cleanup_card(dev);
+		}
+		free_netdev(dev);
+		printk(KERN_WARNING "e2100.c: No E2100 card found (i/o = 0x%x).\n", io[this_dev]);
+		break;
+	}
+	if (found)
+		return 0;
+	return -ENXIO;
+}
+
+void
+cleanup_module(void)
+{
+	int this_dev;
+
+	for (this_dev = 0; this_dev < MAX_E21_CARDS; this_dev++) {
+		struct net_device *dev = dev_e21[this_dev];
+		if (dev) {
+			unregister_netdev(dev);
+			cleanup_card(dev);
+			free_netdev(dev);
+		}
+	}
+}
+#endif /* MODULE */