net: Add ndo_{set|get}_vf_port support for enic dynamic vnics

Add enic ndo_{set|get}_vf_port ops to support setting/getting
port-profile for enic dynamic devices.  Enic dynamic devices are just like
normal enic eth devices except dynamic enics require an extra configuration
step to assign a port-profile identifier to the interface before the
interface is useable.  Once a port-profile is assigned, link comes up on the
interface and is ready for I/O.  The port-profile is used to configure the
network port assigned to the interface.  The network port configuration
includes VLAN membership, QoS policies, and port security settings typical
of a data center network.

A dynamic enic initially has a zero-mac address.  Before a port-profile is
assigned, a valid non-zero unicast mac address should be assign to the
dynamic enic interface.

Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>

1 files changed, 9 insertions, 1 deletions

diff --git a/drivers/net/enic/enic.h b/drivers/net/enic/enic.h
index 5fa56f1e5590..85f2a2e7030a 100644
--- a/drivers/net/enic/enic.h
+++ b/drivers/net/enic/enic.h
@@ -34,7 +34,7 @@
 
 #define DRV_NAME		"enic"
 #define DRV_DESCRIPTION		"Cisco VIC Ethernet NIC Driver"
-#define DRV_VERSION		"1.3.1.1"
+#define DRV_VERSION		"1.3.1.1-pp"
 #define DRV_COPYRIGHT		"Copyright 2008-2009 Cisco Systems, Inc"
 #define PFX			DRV_NAME ": "
 
@@ -74,6 +74,13 @@ struct enic_msix_entry {
 	void *devid;
 };
 
+struct enic_port_profile {
+	u8 request;
+	char name[PORT_PROFILE_MAX];
+	u8 instance_uuid[PORT_UUID_MAX];
+	u8 host_uuid[PORT_UUID_MAX];
+};
+
 /* Per-instance private data structure */
 struct enic {
 	struct net_device *netdev;
@@ -95,6 +102,7 @@ struct enic {
 	u32 port_mtu;
 	u32 rx_coalesce_usecs;
 	u32 tx_coalesce_usecs;
+	struct enic_port_profile pp;
 
 	/* work queue cache line section */
 	____cacheline_aligned struct vnic_wq wq[ENIC_WQ_MAX];