ethernet: use net core MTU range checking in more drivers

Somehow, I missed a healthy number of ethernet drivers in the last pass.
Most of these drivers either were in need of an updated max_mtu to make
jumbo frames possible to enable again. In a few cases, also setting a
different min_mtu to match previous lower bounds. There are also a few
drivers that had no upper bounds checking, so they're getting a brand new
ETH_MAX_MTU that is identical to IP_MAX_MTU, but accessible by includes
all ethernet and ethernet-like drivers all have already.

acenic:
- min_mtu = 0, max_mtu = 9000

amazon/ena:
- min_mtu = 128, max_mtu = adapter->max_mtu

amd/xgbe:
- min_mtu = 0, max_mtu = 9000

sb1250:
- min_mtu = 0, max_mtu = 1518

cxgb3:
- min_mtu = 81, max_mtu = 65535

cxgb4:
- min_mtu = 81, max_mtu = 9600

cxgb4vf:
- min_mtu = 81, max_mtu = 65535

benet:
- min_mtu = 256, max_mtu = 9000

ibmveth:
- min_mtu = 68, max_mtu = 65535

ibmvnic:
- min_mtu = adapter->min_mtu, max_mtu = adapter->max_mtu
- remove now redundant ibmvnic_change_mtu

jme:
- min_mtu = 1280, max_mtu = 9202

mv643xx_eth:
- min_mtu = 64, max_mtu = 9500

mlxsw:
- min_mtu = 0, max_mtu = 65535
- Basically bypassing the core checks, and instead relying on dynamic
  checks in the respective switch drivers' ndo_change_mtu functions

ns83820:
- min_mtu = 0
- remove redundant ns83820_change_mtu, only checked for mtu > 1500

netxen:
- min_mtu = 0, max_mtu = 8000 (P2), max_mtu = 9600 (P3)

qlge:
- min_mtu = 1500, max_mtu = 9000
- driver only supports setting mtu to 1500 or 9000, so the core check only
  rules out < 1500 and > 9000, qlge_change_mtu still needs to check that
  the value is 1500 or 9000

qualcomm/emac:
- min_mtu = 46, max_mtu = 9194

xilinx_axienet:
- min_mtu = 64, max_mtu = 9000

Fixes: 61e84623ace3 ("net: centralize net_device min/max MTU checking")
CC: netdev@vger.kernel.org
CC: Jes Sorensen <jes@trained-monkey.org>
CC: Netanel Belgazal <netanel@annapurnalabs.com>
CC: Tom Lendacky <thomas.lendacky@amd.com>
CC: Santosh Raspatur <santosh@chelsio.com>
CC: Hariprasad S <hariprasad@chelsio.com>
CC: Sathya Perla <sathya.perla@broadcom.com>
CC: Ajit Khaparde <ajit.khaparde@broadcom.com>
CC: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
CC: Somnath Kotur <somnath.kotur@broadcom.com>
CC: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
CC: John Allen <jallen@linux.vnet.ibm.com>
CC: Guo-Fu Tseng <cooldavid@cooldavid.org>
CC: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
CC: Jiri Pirko <jiri@mellanox.com>
CC: Ido Schimmel <idosch@mellanox.com>
CC: Manish Chopra <manish.chopra@qlogic.com>
CC: Sony Chacko <sony.chacko@qlogic.com>
CC: Rajesh Borundia <rajesh.borundia@qlogic.com>
CC: Timur Tabi <timur@codeaurora.org>
CC: Anirudha Sarangi <anirudh@xilinx.com>
CC: John Linn <John.Linn@xilinx.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 2 insertions, 10 deletions

diff --git a/drivers/net/ethernet/broadcom/sb1250-mac.c b/drivers/net/ethernet/broadcom/sb1250-mac.c
index f1b81187a201..cb312e4c89f4 100644
--- a/drivers/net/ethernet/broadcom/sb1250-mac.c
+++ b/drivers/net/ethernet/broadcom/sb1250-mac.c
@@ -2147,15 +2147,6 @@ static void sbmac_setmulti(struct sbmac_softc *sc)
 	}
 }
 
-static int sb1250_change_mtu(struct net_device *_dev, int new_mtu)
-{
-	if (new_mtu >  ENET_PACKET_SIZE)
-		return -EINVAL;
-	_dev->mtu = new_mtu;
-	pr_info("changing the mtu to %d\n", new_mtu);
-	return 0;
-}
-
 static const struct net_device_ops sbmac_netdev_ops = {
 	.ndo_open		= sbmac_open,
 	.ndo_stop		= sbmac_close,
@@ -2163,7 +2154,6 @@ static const struct net_device_ops sbmac_netdev_ops = {
 	.ndo_set_rx_mode	= sbmac_set_rx_mode,
 	.ndo_tx_timeout		= sbmac_tx_timeout,
 	.ndo_do_ioctl		= sbmac_mii_ioctl,
-	.ndo_change_mtu		= sb1250_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= eth_mac_addr,
 #ifdef CONFIG_NET_POLL_CONTROLLER
@@ -2229,6 +2219,8 @@ static int sbmac_init(struct platform_device *pldev, long long base)
 
 	dev->netdev_ops = &sbmac_netdev_ops;
 	dev->watchdog_timeo = TX_TIMEOUT;
+	dev->max_mtu = 0;
+	dev->max_mtu = ENET_PACKET_SIZE;
 
 	netif_napi_add(dev, &sc->napi, sbmac_poll, 16);