summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/dlink/Kconfig
diff options
context:
space:
mode:
authorOndrej Zary <linux@rainbow-software.org>2015-11-15 22:36:11 +0100
committerDavid S. Miller <davem@davemloft.net>2015-11-16 23:11:31 +0100
commitc3f45d322cbd379c46466cc2ecab7e2d719b22ed (patch)
treef8bbc735fb79fbc7306dd4e96098c834aea58c9a /drivers/net/ethernet/dlink/Kconfig
parentsnmp: Remove duplicate OUTMCAST stat increment (diff)
downloadlinux-c3f45d322cbd379c46466cc2ecab7e2d719b22ed.tar.xz
linux-c3f45d322cbd379c46466cc2ecab7e2d719b22ed.zip
dl2k: Add support for IP1000A-based cards
Add support for IP1000A chips to dl2k driver. IP1000A chip looks like a TC9020 with integrated PHY. This allows IP1000A chips to work reliably because the ipg driver is buggy - it loses packets under load and then completely stops transmitting data. Tested with Asus NX1101 v2.0 at 10, 100 and 1000Mbps: vendor=0x13f0 device=0x1023 (rev 0x41) subsystem vendor=0x1043 device=0x8180 MAC address registers access needed to be changed from 8-bit to 16-bit because 8-bit does not work on IP1000A. 8-bit access is not even allowed in the TC9020 datasheet (although it worked). 16-bit access works on both. Tested that it does not break D-Link DGE-550T (DL-2000 chip, probably a rebranded TC9020): vendor=0x1186 device=0x4000 (rev 0x0c) subsystem vendor=0x1186 device=0x4000 Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/ethernet/dlink/Kconfig')
-rw-r--r--drivers/net/ethernet/dlink/Kconfig5
1 files changed, 3 insertions, 2 deletions
diff --git a/drivers/net/ethernet/dlink/Kconfig b/drivers/net/ethernet/dlink/Kconfig
index f6e858d0b9d4..ebdc83247bb6 100644
--- a/drivers/net/ethernet/dlink/Kconfig
+++ b/drivers/net/ethernet/dlink/Kconfig
@@ -17,15 +17,16 @@ config NET_VENDOR_DLINK
if NET_VENDOR_DLINK
config DL2K
- tristate "DL2000/TC902x-based Gigabit Ethernet support"
+ tristate "DL2000/TC902x/IP1000A-based Gigabit Ethernet support"
depends on PCI
select CRC32
---help---
- This driver supports DL2000/TC902x-based Gigabit ethernet cards,
+ This driver supports DL2000/TC902x/IP1000A-based Gigabit ethernet cards,
which includes
D-Link DGE-550T Gigabit Ethernet Adapter.
D-Link DL2000-based Gigabit Ethernet Adapter.
Sundance/Tamarack TC902x Gigabit Ethernet Adapter.
+ ICPlus IP1000A-based cards
To compile this driver as a module, choose M here: the
module will be called dl2k.