ks8*/ksz8*: Move the Micrel drivers

Move the Micrel drivers into drivers/net/ethernet/micrel/ and
make the necessary Kconfig and Makefile changes.

CC: Ben Dooks <ben@simtec.co.uk>
CC: Tristram Ha <Tristram.Ha@micrel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 107 insertions, 0 deletions

diff --git a/drivers/net/ethernet/micrel/ks8695net.h b/drivers/net/ethernet/micrel/ks8695net.h
new file mode 100644
index 000000000000..80eff6ea5163
--- /dev/null
+++ b/drivers/net/ethernet/micrel/ks8695net.h
@@ -0,0 +1,107 @@
+/*
+ * Micrel KS8695 (Centaur) Ethernet.
+ *
+ * Copyright 2008 Simtec Electronics
+ *		  Daniel Silverstone <dsilvers@simtec.co.uk>
+ *		  Vincent Sanders <vince@simtec.co.uk>
+ */
+
+#ifndef KS8695NET_H
+#define KS8695NET_H
+
+/* Receive descriptor flags */
+#define RDES_OWN	(1 << 31)	/* Ownership */
+#define RDES_FS		(1 << 30)	/* First Descriptor */
+#define RDES_LS		(1 << 29)	/* Last Descriptor */
+#define RDES_IPE	(1 << 28)	/* IP Checksum error */
+#define RDES_TCPE	(1 << 27)	/* TCP Checksum error */
+#define RDES_UDPE	(1 << 26)	/* UDP Checksum error */
+#define RDES_ES		(1 << 25)	/* Error summary */
+#define RDES_MF		(1 << 24)	/* Multicast Frame */
+#define RDES_RE		(1 << 19)	/* MII Error reported */
+#define RDES_TL		(1 << 18)	/* Frame too Long */
+#define RDES_RF		(1 << 17)	/* Runt Frame */
+#define RDES_CE		(1 << 16)	/* CRC error */
+#define RDES_FT		(1 << 15)	/* Frame Type */
+#define RDES_FLEN	(0x7ff)		/* Frame Length */
+
+#define RDES_RER	(1 << 25)	/* Receive End of Ring */
+#define RDES_RBS	(0x7ff)		/* Receive Buffer Size */
+
+/* Transmit descriptor flags */
+
+#define TDES_OWN	(1 << 31)	/* Ownership */
+
+#define TDES_IC		(1 << 31)	/* Interrupt on Completion */
+#define TDES_FS		(1 << 30)	/* First Segment */
+#define TDES_LS		(1 << 29)	/* Last Segment */
+#define TDES_IPCKG	(1 << 28)	/* IP Checksum generate */
+#define TDES_TCPCKG	(1 << 27)	/* TCP Checksum generate */
+#define TDES_UDPCKG	(1 << 26)	/* UDP Checksum generate */
+#define TDES_TER	(1 << 25)	/* Transmit End of Ring */
+#define TDES_TBS	(0x7ff)		/* Transmit Buffer Size */
+
+/*
+ * Network controller register offsets
+ */
+#define KS8695_DTXC		(0x00)		/* DMA Transmit Control */
+#define KS8695_DRXC		(0x04)		/* DMA Receive Control */
+#define KS8695_DTSC		(0x08)		/* DMA Transmit Start Command */
+#define KS8695_DRSC		(0x0c)		/* DMA Receive Start Command */
+#define KS8695_TDLB		(0x10)		/* Transmit Descriptor List
+						 * Base Address
+						 */
+#define KS8695_RDLB		(0x14)		/* Receive Descriptor List
+						 * Base Address
+						 */
+#define KS8695_MAL		(0x18)		/* MAC Station Address Low */
+#define KS8695_MAH		(0x1c)		/* MAC Station Address High */
+#define KS8695_AAL_(n)		(0x80 + ((n)*8))	/* MAC Additional
+							 * Station Address
+							 * (0..15) Low
+							 */
+#define KS8695_AAH_(n)		(0x84 + ((n)*8))	/* MAC Additional
+							 * Station Address
+							 * (0..15) High
+							 */
+
+
+/* DMA Transmit Control Register */
+#define DTXC_TRST		(1    << 31)	/* Soft Reset */
+#define DTXC_TBS		(0x3f << 24)	/* Transmit Burst Size */
+#define DTXC_TUCG		(1    << 18)	/* Transmit UDP
+						 * Checksum Generate
+						 */
+#define DTXC_TTCG		(1    << 17)	/* Transmit TCP
+						 * Checksum Generate
+						 */
+#define DTXC_TICG		(1    << 16)	/* Transmit IP
+						 * Checksum Generate
+						 */
+#define DTXC_TFCE		(1    <<  9)	/* Transmit Flow
+						 * Control Enable
+						 */
+#define DTXC_TLB		(1    <<  8)	/* Loopback mode */
+#define DTXC_TEP		(1    <<  2)	/* Transmit Enable Padding */
+#define DTXC_TAC		(1    <<  1)	/* Transmit Add CRC */
+#define DTXC_TE			(1    <<  0)	/* TX Enable */
+
+/* DMA Receive Control Register */
+#define DRXC_RBS		(0x3f << 24)	/* Receive Burst Size */
+#define DRXC_RUCC		(1    << 18)	/* Receive UDP Checksum check */
+#define DRXC_RTCG		(1    << 17)	/* Receive TCP Checksum check */
+#define DRXC_RICG		(1    << 16)	/* Receive IP Checksum check */
+#define DRXC_RFCE		(1    <<  9)	/* Receive Flow Control
+						 * Enable
+						 */
+#define DRXC_RB			(1    <<  6)	/* Receive Broadcast */
+#define DRXC_RM			(1    <<  5)	/* Receive Multicast */
+#define DRXC_RU			(1    <<  4)	/* Receive Unicast */
+#define DRXC_RERR		(1    <<  3)	/* Receive Error Frame */
+#define DRXC_RA			(1    <<  2)	/* Receive All */
+#define DRXC_RE			(1    <<  0)	/* RX Enable */
+
+/* Additional Station Address High */
+#define AAH_E			(1    << 31)	/* Address Enabled */
+
+#endif /* KS8695NET_H */