Merge tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - BPF:
      - add syscall program type and libbpf support for generating
        instructions and bindings for in-kernel BPF loaders (BPF loaders
        for BPF), this is a stepping stone for signed BPF programs
      - infrastructure to migrate TCP child sockets from one listener to
        another in the same reuseport group/map to improve flexibility
        of service hand-off/restart
      - add broadcast support to XDP redirect

   - allow bypass of the lockless qdisc to improving performance (for
     pktgen: +23% with one thread, +44% with 2 threads)

   - add a simpler version of "DO_ONCE()" which does not require jump
     labels, intended for slow-path usage

   - virtio/vsock: introduce SOCK_SEQPACKET support

   - add getsocketopt to retrieve netns cookie

   - ip: treat lowest address of a IPv4 subnet as ordinary unicast
     address allowing reclaiming of precious IPv4 addresses

   - ipv6: use prandom_u32() for ID generation

   - ip: add support for more flexible field selection for hashing
     across multi-path routes (w/ offload to mlxsw)

   - icmp: add support for extended RFC 8335 PROBE (ping)

   - seg6: add support for SRv6 End.DT46 behavior

   - mptcp:
      - DSS checksum support (RFC 8684) to detect middlebox meddling
      - support Connection-time 'C' flag
      - time stamping support

   - sctp: packetization Layer Path MTU Discovery (RFC 8899)

   - xfrm: speed up state addition with seq set

   - WiFi:
      - hidden AP discovery on 6 GHz and other HE 6 GHz improvements
      - aggregation handling improvements for some drivers
      - minstrel improvements for no-ack frames
      - deferred rate control for TXQs to improve reaction times
      - switch from round robin to virtual time-based airtime scheduler

   - add trace points:
      - tcp checksum errors
      - openvswitch - action execution, upcalls
      - socket errors via sk_error_report

  Device APIs:

   - devlink: add rate API for hierarchical control of max egress rate
     of virtual devices (VFs, SFs etc.)

   - don't require RCU read lock to be held around BPF hooks in NAPI
     context

   - page_pool: generic buffer recycling

  New hardware/drivers:

   - mobile:
      - iosm: PCIe Driver for Intel M.2 Modem
      - support for Qualcomm MSM8998 (ipa)

   - WiFi: Qualcomm QCN9074 and WCN6855 PCI devices

   - sparx5: Microchip SparX-5 family of Enterprise Ethernet switches

   - Mellanox BlueField Gigabit Ethernet (control NIC of the DPU)

   - NXP SJA1110 Automotive Ethernet 10-port switch

   - Qualcomm QCA8327 switch support (qca8k)

   - Mikrotik 10/25G NIC (atl1c)

  Driver changes:

   - ACPI support for some MDIO, MAC and PHY devices from Marvell and
     NXP (our first foray into MAC/PHY description via ACPI)

   - HW timestamping (PTP) support: bnxt_en, ice, sja1105, hns3, tja11xx

   - Mellanox/Nvidia NIC (mlx5)
      - NIC VF offload of L2 bridging
      - support IRQ distribution to Sub-functions

   - Marvell (prestera):
      - add flower and match all
      - devlink trap
      - link aggregation

   - Netronome (nfp): connection tracking offload

   - Intel 1GE (igc): add AF_XDP support

   - Marvell DPU (octeontx2): ingress ratelimit offload

   - Google vNIC (gve): new ring/descriptor format support

   - Qualcomm mobile (rmnet & ipa): inline checksum offload support

   - MediaTek WiFi (mt76)
      - mt7915 MSI support
      - mt7915 Tx status reporting
      - mt7915 thermal sensors support
      - mt7921 decapsulation offload
      - mt7921 enable runtime pm and deep sleep

   - Realtek WiFi (rtw88)
      - beacon filter support
      - Tx antenna path diversity support
      - firmware crash information via devcoredump

   - Qualcomm WiFi (wcn36xx)
      - Wake-on-WLAN support with magic packets and GTK rekeying

   - Micrel PHY (ksz886x/ksz8081): add cable test support"

* tag 'net-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2168 commits)
  tcp: change ICSK_CA_PRIV_SIZE definition
  tcp_yeah: check struct yeah size at compile time
  gve: DQO: Fix off by one in gve_rx_dqo()
  stmmac: intel: set PCI_D3hot in suspend
  stmmac: intel: Enable PHY WOL option in EHL
  net: stmmac: option to enable PHY WOL with PMT enabled
  net: say "local" instead of "static" addresses in ndo_dflt_fdb_{add,del}
  net: use netdev_info in ndo_dflt_fdb_{add,del}
  ptp: Set lookup cookie when creating a PTP PPS source.
  net: sock: add trace for socket errors
  net: sock: introduce sk_error_report
  net: dsa: replay the local bridge FDB entries pointing to the bridge dev too
  net: dsa: ensure during dsa_fdb_offload_notify that dev_hold and dev_put are on the same dev
  net: dsa: include fdb entries pointing to bridge in the host fdb list
  net: dsa: include bridge addresses which are local in the host fdb list
  net: dsa: sync static FDB entries on foreign interfaces to hardware
  net: dsa: install the host MDB and FDB entries in the master's RX filter
  net: dsa: reference count the FDB addresses at the cross-chip notifier level
  net: dsa: introduce a separate cross-chip notifier type for host FDBs
  net: dsa: reference count the MDB entries at the cross-chip notifier level
  ...

3 files changed, 19 insertions, 29 deletions

diff --git a/drivers/net/ethernet/neterion/s2io.c b/drivers/net/ethernet/neterion/s2io.c
index 9cfcd5500462..0b017d4f5c08 100644
--- a/drivers/net/ethernet/neterion/s2io.c
+++ b/drivers/net/ethernet/neterion/s2io.c
@@ -1101,6 +1101,8 @@ static int s2io_print_pci_mode(struct s2io_nic *nic)
  *  @nic: device private variable
  *  @link: link status (UP/DOWN) used to enable/disable continuous
  *  transmit interrupts
+ *  @may_sleep: parameter indicates if sleeping when waiting for
+ *  command complete
  *  Description: The function configures transmit traffic interrupts
  *  Return Value:  SUCCESS on success and
  *  '-1' on failure
@@ -2743,7 +2745,7 @@ static int s2io_chk_rx_buffers(struct s2io_nic *nic, struct ring_info *ring)
 }
 
 /**
- * s2io_poll - Rx interrupt handler for NAPI support
+ * s2io_poll_msix - Rx interrupt handler for NAPI support
  * @napi : pointer to the napi structure.
  * @budget : The number of packets that were budgeted to be processed
  * during  one pass through the 'Poll" function.
@@ -3323,6 +3325,8 @@ static void s2io_updt_xpak_counter(struct net_device *dev)
  *  @addr: address
  *  @busy_bit: bit to check for busy
  *  @bit_state: state to check
+ *  @may_sleep: parameter indicates if sleeping when waiting for
+ *  command complete
  *  Description: Function that waits for a command to Write into RMAC
  *  ADDR DATA registers to be completed and returns either success or
  *  error depending on whether the command was complete or not.
@@ -4868,6 +4872,8 @@ static struct net_device_stats *s2io_get_stats(struct net_device *dev)
 /**
  *  s2io_set_multicast - entry point for multicast address enable/disable.
  *  @dev : pointer to the device structure
+ *  @may_sleep: parameter indicates if sleeping when waiting for command
+ *  complete
  *  Description:
  *  This function is a driver entry point which gets called by the kernel
  *  whenever multicast addresses must be enabled/disabled. This also gets
@@ -5288,7 +5294,7 @@ s2io_ethtool_set_link_ksettings(struct net_device *dev,
 }
 
 /**
- * s2io_ethtol_get_link_ksettings - Return link specific information.
+ * s2io_ethtool_get_link_ksettings - Return link specific information.
  * @dev: pointer to netdev
  * @cmd : pointer to the structure with parameters given by ethtool
  * to return link information.
diff --git a/drivers/net/ethernet/neterion/vxge/vxge-config.c b/drivers/net/ethernet/neterion/vxge/vxge-config.c
index b47d74743f5a..a3204a7ef750 100644
--- a/drivers/net/ethernet/neterion/vxge/vxge-config.c
+++ b/drivers/net/ethernet/neterion/vxge/vxge-config.c
@@ -4885,7 +4885,7 @@ vpath_open_exit1:
 }
 
 /**
- * vxge_hw_vpath_rx_doorbell_post - Close the handle got from previous vpath
+ * vxge_hw_vpath_rx_doorbell_init - Close the handle got from previous vpath
  * (vpath) open
  * @vp: Handle got from previous vpath open
  *
diff --git a/drivers/net/ethernet/neterion/vxge/vxge-main.c b/drivers/net/ethernet/neterion/vxge/vxge-main.c
index 87892bd992b1..82eef4c72f01 100644
--- a/drivers/net/ethernet/neterion/vxge/vxge-main.c
+++ b/drivers/net/ethernet/neterion/vxge/vxge-main.c
@@ -87,7 +87,7 @@ static unsigned int bw_percentage[VXGE_HW_MAX_VIRTUAL_PATHS] =
 module_param_array(bw_percentage, uint, NULL, 0);
 
 static struct vxge_drv_config *driver_config;
-static enum vxge_hw_status vxge_reset_all_vpaths(struct vxgedev *vdev);
+static void vxge_reset_all_vpaths(struct vxgedev *vdev);
 
 static inline int is_vxge_card_up(struct vxgedev *vdev)
 {
@@ -1606,7 +1606,6 @@ static void vxge_config_ci_for_tti_rti(struct vxgedev *vdev)
 
 static int do_vxge_reset(struct vxgedev *vdev, int event)
 {
-	enum vxge_hw_status status;
 	int ret = 0, vp_id, i;
 
 	vxge_debug_entryexit(VXGE_TRACE, "%s:%d", __func__, __LINE__);
@@ -1709,14 +1708,7 @@ static int do_vxge_reset(struct vxgedev *vdev, int event)
 		netif_tx_stop_all_queues(vdev->ndev);
 
 	if (event == VXGE_LL_FULL_RESET) {
-		status = vxge_reset_all_vpaths(vdev);
-		if (status != VXGE_HW_OK) {
-			vxge_debug_init(VXGE_ERR,
-				"fatal: %s: can not reset vpaths",
-				vdev->ndev->name);
-			ret = -EPERM;
-			goto out;
-		}
+		vxge_reset_all_vpaths(vdev);
 	}
 
 	if (event == VXGE_LL_COMPL_RESET) {
@@ -1799,7 +1791,7 @@ static void vxge_reset(struct work_struct *work)
 }
 
 /**
- * vxge_poll - Receive handler when Receive Polling is used.
+ * vxge_poll_msix - Receive handler when Receive Polling is used.
  * @napi: pointer to the napi structure.
  * @budget: Number of packets budgeted to be processed in this iteration.
  *
@@ -1969,9 +1961,8 @@ static enum vxge_hw_status vxge_rth_configure(struct vxgedev *vdev)
 }
 
 /* reset vpaths */
-static enum vxge_hw_status vxge_reset_all_vpaths(struct vxgedev *vdev)
+static void vxge_reset_all_vpaths(struct vxgedev *vdev)
 {
-	enum vxge_hw_status status = VXGE_HW_OK;
 	struct vxge_vpath *vpath;
 	int i;
 
@@ -1986,18 +1977,16 @@ static enum vxge_hw_status vxge_reset_all_vpaths(struct vxgedev *vdev)
 						"vxge_hw_vpath_recover_"
 						"from_reset failed for vpath: "
 						"%d", i);
-					return status;
+					return;
 				}
 			} else {
 				vxge_debug_init(VXGE_ERR,
 					"vxge_hw_vpath_reset failed for "
 					"vpath:%d", i);
-				return status;
+				return;
 			}
 		}
 	}
-
-	return status;
 }
 
 /* close vpaths */
@@ -2676,11 +2665,7 @@ static int vxge_set_features(struct net_device *dev, netdev_features_t features)
 	/* !netif_running() ensured by vxge_fix_features() */
 
 	vdev->devh->config.rth_en = !!(features & NETIF_F_RXHASH);
-	if (vxge_reset_all_vpaths(vdev) != VXGE_HW_OK) {
-		dev->features = features ^ NETIF_F_RXHASH;
-		vdev->devh->config.rth_en = !!(dev->features & NETIF_F_RXHASH);
-		return -EIO;
-	}
+	vxge_reset_all_vpaths(vdev);
 
 	return 0;
 }
@@ -3693,10 +3678,9 @@ static int vxge_config_vpaths(struct vxge_hw_device_config *device_config,
 			driver_config->vpath_per_dev = 1;
 
 		for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++)
-			if (!vxge_bVALn(vpath_mask, i, 1))
-				continue;
-			else
+			if (vxge_bVALn(vpath_mask, i, 1))
 				default_no_vpath++;
+
 		if (default_no_vpath < driver_config->vpath_per_dev)
 			driver_config->vpath_per_dev = default_no_vpath;
 
@@ -4752,7 +4736,7 @@ _exit0:
 }
 
 /**
- * vxge_rem_nic - Free the PCI device
+ * vxge_remove - Free the PCI device
  * @pdev: structure containing the PCI related information of the device.
  * Description: This function is called by the Pci subsystem to release a
  * PCI device and free up all resource held up by the device.