net: smc91x: use run-time configuration on all ARM machines

The smc91x driver traditionally gets configured at compile-time
for whichever hardware it runs on. This no longer works on
ARM as we continue to move to building all-in-one kernels.

Most ARM configurations with this driver already use run-time
configuration through DT or through platform_data, but a
few have not been converted yet.

I've checked all ARM boards that use this driver in their
legacy board files, and converted the ones that were using
compile-time configuration in smc91x.h to behave like the
other ones and provide the interrupt polarity along with
the MMIO configuration (width, stride) at platform device
creation time.

In particular, these combinations were previously selectable
in Kconfig but in fact broken:

- sa1100 assabet plus pleb
- msm combined with any other armv6/v7 platform
- pxa-idp combined with any non-DMA pxa variant
- LogicPD PXA270 combined with any other pxa
- nomadik combined with any other armv4/v5 platform,
  e.g. versatile.

None of these seem critical enough to warrant a backport
to stable, but it would be nice to clean this up for good.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
----
I would like the patch to get merged through netdev, after
Robert and/or Linus have verified it on at least some hardware.

There are a few other non-ARM platforms using this driver,
I could do the same patch for those if we want to take
it further.

 arch/arm/mach-msm/board-halibut.c    |   8 ++++-
 arch/arm/mach-msm/board-qsd8x50.c    |   8 ++++-
 arch/arm/mach-pxa/idp.c              |   5 +++
 arch/arm/mach-pxa/lpd270.c           |   8 ++++-
 arch/arm/mach-realview/core.c        |   7 ++++
 arch/arm/mach-realview/realview_eb.c |   2 +-
 arch/arm/mach-sa1100/neponset.c      |   6 ++++
 arch/arm/mach-sa1100/pleb.c          |   7 ++++
 drivers/net/ethernet/smsc/smc91x.c   |   9 +++--
 drivers/net/ethernet/smsc/smc91x.h   | 114 ++----------------------------------------------------------
 10 files changed, 57 insertions(+), 117 deletions(-)
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 3 insertions, 111 deletions

diff --git a/drivers/net/ethernet/smsc/smc91x.h b/drivers/net/ethernet/smsc/smc91x.h
index be67baf5f677..3a18501d1068 100644
--- a/drivers/net/ethernet/smsc/smc91x.h
+++ b/drivers/net/ethernet/smsc/smc91x.h
@@ -39,14 +39,7 @@
  * Define your architecture specific bus configuration parameters here.
  */
 
-#if defined(CONFIG_ARCH_LUBBOCK) ||\
-    defined(CONFIG_MACH_MAINSTONE) ||\
-    defined(CONFIG_MACH_ZYLONITE) ||\
-    defined(CONFIG_MACH_LITTLETON) ||\
-    defined(CONFIG_MACH_ZYLONITE2) ||\
-    defined(CONFIG_ARCH_VIPER) ||\
-    defined(CONFIG_MACH_STARGATE2) ||\
-    defined(CONFIG_ARCH_VERSATILE)
+#if defined(CONFIG_ARM)
 
 #include <asm/mach-types.h>
 
@@ -74,95 +67,8 @@
 /* We actually can't write halfwords properly if not word aligned */
 static inline void SMC_outw(u16 val, void __iomem *ioaddr, int reg)
 {
-	if ((machine_is_mainstone() || machine_is_stargate2()) && reg & 2) {
-		unsigned int v = val << 16;
-		v |= readl(ioaddr + (reg & ~2)) & 0xffff;
-		writel(v, ioaddr + (reg & ~2));
-	} else {
-		writew(val, ioaddr + reg);
-	}
-}
-
-#elif defined(CONFIG_SA1100_PLEB)
-/* We can only do 16-bit reads and writes in the static memory space. */
-#define SMC_CAN_USE_8BIT	1
-#define SMC_CAN_USE_16BIT	1
-#define SMC_CAN_USE_32BIT	0
-#define SMC_IO_SHIFT		0
-#define SMC_NOWAIT		1
-
-#define SMC_inb(a, r)		readb((a) + (r))
-#define SMC_insb(a, r, p, l)	readsb((a) + (r), p, (l))
-#define SMC_inw(a, r)		readw((a) + (r))
-#define SMC_insw(a, r, p, l)	readsw((a) + (r), p, l)
-#define SMC_outb(v, a, r)	writeb(v, (a) + (r))
-#define SMC_outsb(a, r, p, l)	writesb((a) + (r), p, (l))
-#define SMC_outw(v, a, r)	writew(v, (a) + (r))
-#define SMC_outsw(a, r, p, l)	writesw((a) + (r), p, l)
-
-#define SMC_IRQ_FLAGS		(-1)
-
-#elif defined(CONFIG_SA1100_ASSABET)
-
-#include <mach/neponset.h>
-
-/* We can only do 8-bit reads and writes in the static memory space. */
-#define SMC_CAN_USE_8BIT	1
-#define SMC_CAN_USE_16BIT	0
-#define SMC_CAN_USE_32BIT	0
-#define SMC_NOWAIT		1
-
-/* The first two address lines aren't connected... */
-#define SMC_IO_SHIFT		2
-
-#define SMC_inb(a, r)		readb((a) + (r))
-#define SMC_outb(v, a, r)	writeb(v, (a) + (r))
-#define SMC_insb(a, r, p, l)	readsb((a) + (r), p, (l))
-#define SMC_outsb(a, r, p, l)	writesb((a) + (r), p, (l))
-#define SMC_IRQ_FLAGS		(-1)	/* from resource */
-
-#elif	defined(CONFIG_MACH_LOGICPD_PXA270) ||	\
-	defined(CONFIG_MACH_NOMADIK_8815NHK)
-
-#define SMC_CAN_USE_8BIT	0
-#define SMC_CAN_USE_16BIT	1
-#define SMC_CAN_USE_32BIT	0
-#define SMC_IO_SHIFT		0
-#define SMC_NOWAIT		1
-
-#define SMC_inw(a, r)		readw((a) + (r))
-#define SMC_outw(v, a, r)	writew(v, (a) + (r))
-#define SMC_insw(a, r, p, l)	readsw((a) + (r), p, l)
-#define SMC_outsw(a, r, p, l)	writesw((a) + (r), p, l)
-
-#elif	defined(CONFIG_ARCH_INNOKOM) || \
-	defined(CONFIG_ARCH_PXA_IDP) || \
-	defined(CONFIG_ARCH_RAMSES) || \
-	defined(CONFIG_ARCH_PCM027)
-
-#define SMC_CAN_USE_8BIT	1
-#define SMC_CAN_USE_16BIT	1
-#define SMC_CAN_USE_32BIT	1
-#define SMC_IO_SHIFT		0
-#define SMC_NOWAIT		1
-#define SMC_USE_PXA_DMA		1
-
-#define SMC_inb(a, r)		readb((a) + (r))
-#define SMC_inw(a, r)		readw((a) + (r))
-#define SMC_inl(a, r)		readl((a) + (r))
-#define SMC_outb(v, a, r)	writeb(v, (a) + (r))
-#define SMC_outl(v, a, r)	writel(v, (a) + (r))
-#define SMC_insl(a, r, p, l)	readsl((a) + (r), p, l)
-#define SMC_outsl(a, r, p, l)	writesl((a) + (r), p, l)
-#define SMC_insw(a, r, p, l)	readsw((a) + (r), p, l)
-#define SMC_outsw(a, r, p, l)	writesw((a) + (r), p, l)
-#define SMC_IRQ_FLAGS		(-1)	/* from resource */
-
-/* We actually can't write halfwords properly if not word aligned */
-static inline void
-SMC_outw(u16 val, void __iomem *ioaddr, int reg)
-{
-	if (reg & 2) {
+	if ((machine_is_mainstone() || machine_is_stargate2() ||
+	     machine_is_pxa_idp()) && reg & 2) {
 		unsigned int v = val << 16;
 		v |= readl(ioaddr + (reg & ~2)) & 0xffff;
 		writel(v, ioaddr + (reg & ~2));
@@ -237,20 +143,6 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg)
 #define RPC_LSA_DEFAULT         RPC_LED_100_10
 #define RPC_LSB_DEFAULT         RPC_LED_TX_RX
 
-#elif defined(CONFIG_ARCH_MSM)
-
-#define SMC_CAN_USE_8BIT	0
-#define SMC_CAN_USE_16BIT	1
-#define SMC_CAN_USE_32BIT	0
-#define SMC_NOWAIT		1
-
-#define SMC_inw(a, r)		readw((a) + (r))
-#define SMC_outw(v, a, r)	writew(v, (a) + (r))
-#define SMC_insw(a, r, p, l)	readsw((a) + (r), p, l)
-#define SMC_outsw(a, r, p, l)	writesw((a) + (r), p, l)
-
-#define SMC_IRQ_FLAGS		IRQF_TRIGGER_HIGH
-
 #elif defined(CONFIG_COLDFIRE)
 
 #define SMC_CAN_USE_8BIT	0