diff options
| author | Shawn Guo <shawn.guo@linaro.org> | 2011-07-01 12:11:22 +0200 |
|---|---|---|
| committer | Shawn Guo <shawn.guo@linaro.org> | 2011-07-27 03:30:50 +0200 |
| commit | 0ca1e290b7c517300bf6cc4f14ebcedb5dfea5cc (patch) | |
| tree | d66e2af8bd869ed6be022419354d2e6def93adc5 /drivers/net/fec.c | |
| parent | serial/imx: add device tree probe support (diff) | |
| download | linux-0ca1e290b7c517300bf6cc4f14ebcedb5dfea5cc.tar.xz linux-0ca1e290b7c517300bf6cc4f14ebcedb5dfea5cc.zip | |
net/fec: gasket needs to be enabled for some i.mx
On the recent i.mx (mx25/50/53), there is a gasket inside fec
controller which needs to be enabled no matter phy works in MII
or RMII mode.
The current code enables the gasket only when phy interface is RMII.
It's broken when the driver works with a MII phy. The patch uses
platform_device_id to distinguish the SoCs that have the gasket and
enables it on these SoCs for both MII and RMII mode.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reported-by: Troy Kisky <troy.kisky@boundarydevices.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/fec.c')
| -rw-r--r-- | drivers/net/fec.c | 22 |
1 files changed, 18 insertions, 4 deletions
diff --git a/drivers/net/fec.c b/drivers/net/fec.c index 5b631fe74738..ed137bbbcf61 100644 --- a/drivers/net/fec.c +++ b/drivers/net/fec.c @@ -66,17 +66,28 @@ #define FEC_QUIRK_ENET_MAC (1 << 0) /* Controller needs driver to swap frame */ #define FEC_QUIRK_SWAP_FRAME (1 << 1) +/* Controller uses gasket */ +#define FEC_QUIRK_USE_GASKET (1 << 2) static struct platform_device_id fec_devtype[] = { { + /* keep it for coldfire */ .name = DRIVER_NAME, .driver_data = 0, }, { + .name = "imx25-fec", + .driver_data = FEC_QUIRK_USE_GASKET, + }, { + .name = "imx27-fec", + .driver_data = 0, + }, { .name = "imx28-fec", .driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_SWAP_FRAME, - }, - { } + }, { + /* sentinel */ + } }; +MODULE_DEVICE_TABLE(platform, fec_devtype); static unsigned char macaddr[ETH_ALEN]; module_param_array(macaddr, byte, NULL, 0); @@ -427,7 +438,7 @@ fec_restart(struct net_device *ndev, int duplex) } else { #ifdef FEC_MIIGSK_ENR - if (fep->phy_interface == PHY_INTERFACE_MODE_RMII) { + if (id_entry->driver_data & FEC_QUIRK_USE_GASKET) { /* disable the gasket and wait */ writel(0, fep->hwp + FEC_MIIGSK_ENR); while (readl(fep->hwp + FEC_MIIGSK_ENR) & 4) @@ -436,8 +447,11 @@ fec_restart(struct net_device *ndev, int duplex) /* * configure the gasket: * RMII, 50 MHz, no loopback, no echo + * MII, 25 MHz, no loopback, no echo */ - writel(1, fep->hwp + FEC_MIIGSK_CFGR); + writel((fep->phy_interface == PHY_INTERFACE_MODE_RMII) ? + 1 : 0, fep->hwp + FEC_MIIGSK_CFGR); + /* re-enable the gasket */ writel(2, fep->hwp + FEC_MIIGSK_ENR); |