Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 213 insertions, 0 deletions

diff --git a/drivers/net/gianfar_phy.h b/drivers/net/gianfar_phy.h
new file mode 100644
index 000000000000..1e9b3abf1e6d
--- /dev/null
+++ b/drivers/net/gianfar_phy.h
@@ -0,0 +1,213 @@
+/* 
+ * drivers/net/gianfar_phy.h
+ *
+ * Gianfar Ethernet Driver -- PHY handling
+ * Driver for FEC on MPC8540 and TSEC on MPC8540/MPC8560
+ * Based on 8260_io/fcc_enet.c
+ *
+ * Author: Andy Fleming
+ * Maintainer: Kumar Gala (kumar.gala@freescale.com)
+ *
+ * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#ifndef __GIANFAR_PHY_H
+#define __GIANFAR_PHY_H
+
+#define MII_end ((u32)-2)
+#define MII_read ((u32)-1)
+
+#define MIIMIND_BUSY            0x00000001
+#define MIIMIND_NOTVALID        0x00000004
+
+#define GFAR_AN_TIMEOUT         2000
+
+/* 1000BT control (Marvell & BCM54xx at least) */
+#define MII_1000BASETCONTROL			0x09
+#define MII_1000BASETCONTROL_FULLDUPLEXCAP	0x0200
+#define MII_1000BASETCONTROL_HALFDUPLEXCAP	0x0100
+
+/* Cicada Extended Control Register 1 */
+#define MII_CIS8201_EXT_CON1           0x17
+#define MII_CIS8201_EXTCON1_INIT       0x0000
+
+/* Cicada Interrupt Mask Register */
+#define MII_CIS8201_IMASK		0x19
+#define MII_CIS8201_IMASK_IEN		0x8000
+#define MII_CIS8201_IMASK_SPEED	0x4000
+#define MII_CIS8201_IMASK_LINK		0x2000
+#define MII_CIS8201_IMASK_DUPLEX	0x1000
+#define MII_CIS8201_IMASK_MASK		0xf000
+
+/* Cicada Interrupt Status Register */
+#define MII_CIS8201_ISTAT		0x1a
+#define MII_CIS8201_ISTAT_STATUS	0x8000
+#define MII_CIS8201_ISTAT_SPEED	0x4000
+#define MII_CIS8201_ISTAT_LINK		0x2000
+#define MII_CIS8201_ISTAT_DUPLEX	0x1000
+
+/* Cicada Auxiliary Control/Status Register */
+#define MII_CIS8201_AUX_CONSTAT        0x1c
+#define MII_CIS8201_AUXCONSTAT_INIT    0x0004
+#define MII_CIS8201_AUXCONSTAT_DUPLEX  0x0020
+#define MII_CIS8201_AUXCONSTAT_SPEED   0x0018
+#define MII_CIS8201_AUXCONSTAT_GBIT    0x0010
+#define MII_CIS8201_AUXCONSTAT_100     0x0008
+                                                                                
+/* 88E1011 PHY Status Register */
+#define MII_M1011_PHY_SPEC_STATUS		0x11
+#define MII_M1011_PHY_SPEC_STATUS_1000		0x8000
+#define MII_M1011_PHY_SPEC_STATUS_100		0x4000
+#define MII_M1011_PHY_SPEC_STATUS_SPD_MASK	0xc000
+#define MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX	0x2000
+#define MII_M1011_PHY_SPEC_STATUS_RESOLVED	0x0800
+#define MII_M1011_PHY_SPEC_STATUS_LINK		0x0400
+
+#define MII_M1011_IEVENT		0x13
+#define MII_M1011_IEVENT_CLEAR		0x0000
+
+#define MII_M1011_IMASK			0x12
+#define MII_M1011_IMASK_INIT		0x6400
+#define MII_M1011_IMASK_CLEAR		0x0000
+
+#define MII_DM9161_SCR		0x10
+#define MII_DM9161_SCR_INIT	0x0610
+
+/* DM9161 Specified Configuration and Status Register */
+#define MII_DM9161_SCSR	0x11
+#define MII_DM9161_SCSR_100F	0x8000
+#define MII_DM9161_SCSR_100H	0x4000
+#define MII_DM9161_SCSR_10F	0x2000
+#define MII_DM9161_SCSR_10H	0x1000
+
+/* DM9161 Interrupt Register */
+#define MII_DM9161_INTR	0x15
+#define MII_DM9161_INTR_PEND		0x8000
+#define MII_DM9161_INTR_DPLX_MASK	0x0800
+#define MII_DM9161_INTR_SPD_MASK	0x0400
+#define MII_DM9161_INTR_LINK_MASK	0x0200
+#define MII_DM9161_INTR_MASK		0x0100
+#define MII_DM9161_INTR_DPLX_CHANGE	0x0010
+#define MII_DM9161_INTR_SPD_CHANGE	0x0008
+#define MII_DM9161_INTR_LINK_CHANGE	0x0004
+#define MII_DM9161_INTR_INIT 		0x0000
+#define MII_DM9161_INTR_STOP	\
+(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK \
+ | MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK)
+
+/* DM9161 10BT Configuration/Status */
+#define MII_DM9161_10BTCSR	0x12
+#define MII_DM9161_10BTCSR_INIT	0x7800
+
+#define MII_BASIC_FEATURES	(SUPPORTED_10baseT_Half | \
+				 SUPPORTED_10baseT_Full | \
+				 SUPPORTED_100baseT_Half | \
+				 SUPPORTED_100baseT_Full | \
+				 SUPPORTED_Autoneg | \
+				 SUPPORTED_TP | \
+				 SUPPORTED_MII)
+
+#define MII_GBIT_FEATURES	(MII_BASIC_FEATURES | \
+				 SUPPORTED_1000baseT_Half | \
+				 SUPPORTED_1000baseT_Full)
+
+#define MII_READ_COMMAND       0x00000001
+
+#define MII_INTERRUPT_DISABLED 0x0
+#define MII_INTERRUPT_ENABLED 0x1
+/* Taken from mii_if_info and sungem_phy.h */
+struct gfar_mii_info {
+	/* Information about the PHY type */
+	/* And management functions */
+	struct phy_info *phyinfo;
+
+	/* forced speed & duplex (no autoneg)
+	 * partner speed & duplex & pause (autoneg)
+	 */
+	int speed;
+	int duplex;
+	int pause;
+
+	/* The most recently read link state */
+	int link;
+
+	/* Enabled Interrupts */
+	u32 interrupts;
+
+	u32 advertising;
+	int autoneg;
+	int mii_id;
+
+	/* private data pointer */
+	/* For use by PHYs to maintain extra state */
+	void *priv;
+
+	/* Provided by host chip */
+	struct net_device *dev;
+
+	/* A lock to ensure that only one thing can read/write
+	 * the MDIO bus at a time */
+	spinlock_t mdio_lock;
+
+	/* Provided by ethernet driver */
+	int (*mdio_read) (struct net_device *dev, int mii_id, int reg);
+	void (*mdio_write) (struct net_device *dev, int mii_id, int reg, int val);
+};
+
+/* struct phy_info: a structure which defines attributes for a PHY
+ *
+ * id will contain a number which represents the PHY.  During
+ * startup, the driver will poll the PHY to find out what its
+ * UID--as defined by registers 2 and 3--is.  The 32-bit result
+ * gotten from the PHY will be ANDed with phy_id_mask to
+ * discard any bits which may change based on revision numbers
+ * unimportant to functionality
+ *
+ * There are 6 commands which take a gfar_mii_info structure.
+ * Each PHY must declare config_aneg, and read_status.
+ */
+struct phy_info {
+	u32 phy_id;
+	char *name;
+	unsigned int phy_id_mask;
+	u32 features;
+
+	/* Called to initialize the PHY */
+	int (*init)(struct gfar_mii_info *mii_info);
+
+	/* Called to suspend the PHY for power */
+	int (*suspend)(struct gfar_mii_info *mii_info);
+
+	/* Reconfigures autonegotiation (or disables it) */
+	int (*config_aneg)(struct gfar_mii_info *mii_info);
+
+	/* Determines the negotiated speed and duplex */
+	int (*read_status)(struct gfar_mii_info *mii_info);
+
+	/* Clears any pending interrupts */
+	int (*ack_interrupt)(struct gfar_mii_info *mii_info);
+
+	/* Enables or disables interrupts */
+	int (*config_intr)(struct gfar_mii_info *mii_info);
+
+	/* Clears up any memory if needed */
+	void (*close)(struct gfar_mii_info *mii_info);
+};
+
+struct phy_info *get_phy_info(struct gfar_mii_info *mii_info);
+int read_phy_reg(struct net_device *dev, int mii_id, int regnum);
+void write_phy_reg(struct net_device *dev, int mii_id, int regnum, int value);
+void mii_clear_phy_interrupt(struct gfar_mii_info *mii_info);
+void mii_configure_phy_interrupt(struct gfar_mii_info *mii_info, u32 interrupts);
+
+struct dm9161_private {
+	struct timer_list timer;
+	int resetdone;
+};
+
+#endif /* GIANFAR_PHY_H */