diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-17 00:20:36 +0200 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-17 00:20:36 +0200 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/hamradio/dmascc.c | |
download | linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.xz linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/net/hamradio/dmascc.c')
-rw-r--r-- | drivers/net/hamradio/dmascc.c | 1493 |
1 files changed, 1493 insertions, 0 deletions
diff --git a/drivers/net/hamradio/dmascc.c b/drivers/net/hamradio/dmascc.c new file mode 100644 index 000000000000..f3269b70a8c5 --- /dev/null +++ b/drivers/net/hamradio/dmascc.c @@ -0,0 +1,1493 @@ +/* + * Driver for high-speed SCC boards (those with DMA support) + * Copyright (C) 1997-2000 Klaus Kudielka + * + * S5SCC/DMA support by Janko Koleznik S52HI + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/if_arp.h> +#include <linux/in.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/netdevice.h> +#include <linux/rtnetlink.h> +#include <linux/sockios.h> +#include <linux/workqueue.h> +#include <asm/atomic.h> +#include <asm/bitops.h> +#include <asm/dma.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/uaccess.h> +#include <net/ax25.h> +#include "z8530.h" + + +/* Number of buffers per channel */ + +#define NUM_TX_BUF 2 /* NUM_TX_BUF >= 1 (min. 2 recommended) */ +#define NUM_RX_BUF 6 /* NUM_RX_BUF >= 1 (min. 2 recommended) */ +#define BUF_SIZE 1576 /* BUF_SIZE >= mtu + hard_header_len */ + + +/* Cards supported */ + +#define HW_PI { "Ottawa PI", 0x300, 0x20, 0x10, 8, \ + 0, 8, 1843200, 3686400 } +#define HW_PI2 { "Ottawa PI2", 0x300, 0x20, 0x10, 8, \ + 0, 8, 3686400, 7372800 } +#define HW_TWIN { "Gracilis PackeTwin", 0x200, 0x10, 0x10, 32, \ + 0, 4, 6144000, 6144000 } +#define HW_S5 { "S5SCC/DMA", 0x200, 0x10, 0x10, 32, \ + 0, 8, 4915200, 9830400 } + +#define HARDWARE { HW_PI, HW_PI2, HW_TWIN, HW_S5 } + +#define TMR_0_HZ 25600 /* Frequency of timer 0 */ + +#define TYPE_PI 0 +#define TYPE_PI2 1 +#define TYPE_TWIN 2 +#define TYPE_S5 3 +#define NUM_TYPES 4 + +#define MAX_NUM_DEVS 32 + + +/* SCC chips supported */ + +#define Z8530 0 +#define Z85C30 1 +#define Z85230 2 + +#define CHIPNAMES { "Z8530", "Z85C30", "Z85230" } + + +/* I/O registers */ + +/* 8530 registers relative to card base */ +#define SCCB_CMD 0x00 +#define SCCB_DATA 0x01 +#define SCCA_CMD 0x02 +#define SCCA_DATA 0x03 + +/* 8253/8254 registers relative to card base */ +#define TMR_CNT0 0x00 +#define TMR_CNT1 0x01 +#define TMR_CNT2 0x02 +#define TMR_CTRL 0x03 + +/* Additional PI/PI2 registers relative to card base */ +#define PI_DREQ_MASK 0x04 + +/* Additional PackeTwin registers relative to card base */ +#define TWIN_INT_REG 0x08 +#define TWIN_CLR_TMR1 0x09 +#define TWIN_CLR_TMR2 0x0a +#define TWIN_SPARE_1 0x0b +#define TWIN_DMA_CFG 0x08 +#define TWIN_SERIAL_CFG 0x09 +#define TWIN_DMA_CLR_FF 0x0a +#define TWIN_SPARE_2 0x0b + + +/* PackeTwin I/O register values */ + +/* INT_REG */ +#define TWIN_SCC_MSK 0x01 +#define TWIN_TMR1_MSK 0x02 +#define TWIN_TMR2_MSK 0x04 +#define TWIN_INT_MSK 0x07 + +/* SERIAL_CFG */ +#define TWIN_DTRA_ON 0x01 +#define TWIN_DTRB_ON 0x02 +#define TWIN_EXTCLKA 0x04 +#define TWIN_EXTCLKB 0x08 +#define TWIN_LOOPA_ON 0x10 +#define TWIN_LOOPB_ON 0x20 +#define TWIN_EI 0x80 + +/* DMA_CFG */ +#define TWIN_DMA_HDX_T1 0x08 +#define TWIN_DMA_HDX_R1 0x0a +#define TWIN_DMA_HDX_T3 0x14 +#define TWIN_DMA_HDX_R3 0x16 +#define TWIN_DMA_FDX_T3R1 0x1b +#define TWIN_DMA_FDX_T1R3 0x1d + + +/* Status values */ + +#define IDLE 0 +#define TX_HEAD 1 +#define TX_DATA 2 +#define TX_PAUSE 3 +#define TX_TAIL 4 +#define RTS_OFF 5 +#define WAIT 6 +#define DCD_ON 7 +#define RX_ON 8 +#define DCD_OFF 9 + + +/* Ioctls */ + +#define SIOCGSCCPARAM SIOCDEVPRIVATE +#define SIOCSSCCPARAM (SIOCDEVPRIVATE+1) + + +/* Data types */ + +struct scc_param { + int pclk_hz; /* frequency of BRG input (don't change) */ + int brg_tc; /* BRG terminal count; BRG disabled if < 0 */ + int nrzi; /* 0 (nrz), 1 (nrzi) */ + int clocks; /* see dmascc_cfg documentation */ + int txdelay; /* [1/TMR_0_HZ] */ + int txtimeout; /* [1/HZ] */ + int txtail; /* [1/TMR_0_HZ] */ + int waittime; /* [1/TMR_0_HZ] */ + int slottime; /* [1/TMR_0_HZ] */ + int persist; /* 1 ... 256 */ + int dma; /* -1 (disable), 0, 1, 3 */ + int txpause; /* [1/TMR_0_HZ] */ + int rtsoff; /* [1/TMR_0_HZ] */ + int dcdon; /* [1/TMR_0_HZ] */ + int dcdoff; /* [1/TMR_0_HZ] */ +}; + +struct scc_hardware { + char *name; + int io_region; + int io_delta; + int io_size; + int num_devs; + int scc_offset; + int tmr_offset; + int tmr_hz; + int pclk_hz; +}; + +struct scc_priv { + int type; + int chip; + struct net_device *dev; + struct scc_info *info; + struct net_device_stats stats; + int channel; + int card_base, scc_cmd, scc_data; + int tmr_cnt, tmr_ctrl, tmr_mode; + struct scc_param param; + char rx_buf[NUM_RX_BUF][BUF_SIZE]; + int rx_len[NUM_RX_BUF]; + int rx_ptr; + struct work_struct rx_work; + int rx_head, rx_tail, rx_count; + int rx_over; + char tx_buf[NUM_TX_BUF][BUF_SIZE]; + int tx_len[NUM_TX_BUF]; + int tx_ptr; + int tx_head, tx_tail, tx_count; + int state; + unsigned long tx_start; + int rr0; + spinlock_t *register_lock; /* Per scc_info */ + spinlock_t ring_lock; +}; + +struct scc_info { + int irq_used; + int twin_serial_cfg; + struct net_device *dev[2]; + struct scc_priv priv[2]; + struct scc_info *next; + spinlock_t register_lock; /* Per device register lock */ +}; + + +/* Function declarations */ +static int setup_adapter(int card_base, int type, int n) __init; + +static void write_scc(struct scc_priv *priv, int reg, int val); +static void write_scc_data(struct scc_priv *priv, int val, int fast); +static int read_scc(struct scc_priv *priv, int reg); +static int read_scc_data(struct scc_priv *priv); + +static int scc_open(struct net_device *dev); +static int scc_close(struct net_device *dev); +static int scc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd); +static int scc_send_packet(struct sk_buff *skb, struct net_device *dev); +static struct net_device_stats *scc_get_stats(struct net_device *dev); +static int scc_set_mac_address(struct net_device *dev, void *sa); + +static inline void tx_on(struct scc_priv *priv); +static inline void rx_on(struct scc_priv *priv); +static inline void rx_off(struct scc_priv *priv); +static void start_timer(struct scc_priv *priv, int t, int r15); +static inline unsigned char random(void); + +static inline void z8530_isr(struct scc_info *info); +static irqreturn_t scc_isr(int irq, void *dev_id, struct pt_regs *regs); +static void rx_isr(struct scc_priv *priv); +static void special_condition(struct scc_priv *priv, int rc); +static void rx_bh(void *arg); +static void tx_isr(struct scc_priv *priv); +static void es_isr(struct scc_priv *priv); +static void tm_isr(struct scc_priv *priv); + + +/* Initialization variables */ + +static int io[MAX_NUM_DEVS] __initdata = { 0, }; + +/* Beware! hw[] is also used in cleanup_module(). */ +static struct scc_hardware hw[NUM_TYPES] __initdata_or_module = HARDWARE; +static char ax25_broadcast[7] __initdata = + { 'Q' << 1, 'S' << 1, 'T' << 1, ' ' << 1, ' ' << 1, ' ' << 1, +'0' << 1 }; +static char ax25_test[7] __initdata = + { 'L' << 1, 'I' << 1, 'N' << 1, 'U' << 1, 'X' << 1, ' ' << 1, +'1' << 1 }; + + +/* Global variables */ + +static struct scc_info *first; +static unsigned long rand; + + +MODULE_AUTHOR("Klaus Kudielka"); +MODULE_DESCRIPTION("Driver for high-speed SCC boards"); +MODULE_PARM(io, "1-" __MODULE_STRING(MAX_NUM_DEVS) "i"); +MODULE_LICENSE("GPL"); + +static void __exit dmascc_exit(void) +{ + int i; + struct scc_info *info; + + while (first) { + info = first; + + /* Unregister devices */ + for (i = 0; i < 2; i++) + unregister_netdev(info->dev[i]); + + /* Reset board */ + if (info->priv[0].type == TYPE_TWIN) + outb(0, info->dev[0]->base_addr + TWIN_SERIAL_CFG); + write_scc(&info->priv[0], R9, FHWRES); + release_region(info->dev[0]->base_addr, + hw[info->priv[0].type].io_size); + + for (i = 0; i < 2; i++) + free_netdev(info->dev[i]); + + /* Free memory */ + first = info->next; + kfree(info); + } +} + +#ifndef MODULE +void __init dmascc_setup(char *str, int *ints) +{ + int i; + + for (i = 0; i < MAX_NUM_DEVS && i < ints[0]; i++) + io[i] = ints[i + 1]; +} +#endif + +static int __init dmascc_init(void) +{ + int h, i, j, n; + int base[MAX_NUM_DEVS], tcmd[MAX_NUM_DEVS], t0[MAX_NUM_DEVS], + t1[MAX_NUM_DEVS]; + unsigned t_val; + unsigned long time, start[MAX_NUM_DEVS], delay[MAX_NUM_DEVS], + counting[MAX_NUM_DEVS]; + + /* Initialize random number generator */ + rand = jiffies; + /* Cards found = 0 */ + n = 0; + /* Warning message */ + if (!io[0]) + printk(KERN_INFO "dmascc: autoprobing (dangerous)\n"); + + /* Run autodetection for each card type */ + for (h = 0; h < NUM_TYPES; h++) { + + if (io[0]) { + /* User-specified I/O address regions */ + for (i = 0; i < hw[h].num_devs; i++) + base[i] = 0; + for (i = 0; i < MAX_NUM_DEVS && io[i]; i++) { + j = (io[i] - + hw[h].io_region) / hw[h].io_delta; + if (j >= 0 && j < hw[h].num_devs + && hw[h].io_region + + j * hw[h].io_delta == io[i]) { + base[j] = io[i]; + } + } + } else { + /* Default I/O address regions */ + for (i = 0; i < hw[h].num_devs; i++) { + base[i] = + hw[h].io_region + i * hw[h].io_delta; + } + } + + /* Check valid I/O address regions */ + for (i = 0; i < hw[h].num_devs; i++) + if (base[i]) { + if (!request_region + (base[i], hw[h].io_size, "dmascc")) + base[i] = 0; + else { + tcmd[i] = + base[i] + hw[h].tmr_offset + + TMR_CTRL; + t0[i] = + base[i] + hw[h].tmr_offset + + TMR_CNT0; + t1[i] = + base[i] + hw[h].tmr_offset + + TMR_CNT1; + } + } + + /* Start timers */ + for (i = 0; i < hw[h].num_devs; i++) + if (base[i]) { + /* Timer 0: LSB+MSB, Mode 3, TMR_0_HZ */ + outb(0x36, tcmd[i]); + outb((hw[h].tmr_hz / TMR_0_HZ) & 0xFF, + t0[i]); + outb((hw[h].tmr_hz / TMR_0_HZ) >> 8, + t0[i]); + /* Timer 1: LSB+MSB, Mode 0, HZ/10 */ + outb(0x70, tcmd[i]); + outb((TMR_0_HZ / HZ * 10) & 0xFF, t1[i]); + outb((TMR_0_HZ / HZ * 10) >> 8, t1[i]); + start[i] = jiffies; + delay[i] = 0; + counting[i] = 1; + /* Timer 2: LSB+MSB, Mode 0 */ + outb(0xb0, tcmd[i]); + } + time = jiffies; + /* Wait until counter registers are loaded */ + udelay(2000000 / TMR_0_HZ); + + /* Timing loop */ + while (jiffies - time < 13) { + for (i = 0; i < hw[h].num_devs; i++) + if (base[i] && counting[i]) { + /* Read back Timer 1: latch; read LSB; read MSB */ + outb(0x40, tcmd[i]); + t_val = + inb(t1[i]) + (inb(t1[i]) << 8); + /* Also check whether counter did wrap */ + if (t_val == 0 + || t_val > TMR_0_HZ / HZ * 10) + counting[i] = 0; + delay[i] = jiffies - start[i]; + } + } + + /* Evaluate measurements */ + for (i = 0; i < hw[h].num_devs; i++) + if (base[i]) { + if ((delay[i] >= 9 && delay[i] <= 11) && + /* Ok, we have found an adapter */ + (setup_adapter(base[i], h, n) == 0)) + n++; + else + release_region(base[i], + hw[h].io_size); + } + + } /* NUM_TYPES */ + + /* If any adapter was successfully initialized, return ok */ + if (n) + return 0; + + /* If no adapter found, return error */ + printk(KERN_INFO "dmascc: no adapters found\n"); + return -EIO; +} + +module_init(dmascc_init); +module_exit(dmascc_exit); + +static void dev_setup(struct net_device *dev) +{ + dev->type = ARPHRD_AX25; + dev->hard_header_len = 73; + dev->mtu = 1500; + dev->addr_len = 7; + dev->tx_queue_len = 64; + memcpy(dev->broadcast, ax25_broadcast, 7); + memcpy(dev->dev_addr, ax25_test, 7); +} + +static int __init setup_adapter(int card_base, int type, int n) +{ + int i, irq, chip; + struct scc_info *info; + struct net_device *dev; + struct scc_priv *priv; + unsigned long time; + unsigned int irqs; + int tmr_base = card_base + hw[type].tmr_offset; + int scc_base = card_base + hw[type].scc_offset; + char *chipnames[] = CHIPNAMES; + + /* Allocate memory */ + info = kmalloc(sizeof(struct scc_info), GFP_KERNEL | GFP_DMA); + if (!info) { + printk(KERN_ERR "dmascc: " + "could not allocate memory for %s at %#3x\n", + hw[type].name, card_base); + goto out; + } + + /* Initialize what is necessary for write_scc and write_scc_data */ + memset(info, 0, sizeof(struct scc_info)); + + info->dev[0] = alloc_netdev(0, "", dev_setup); + if (!info->dev[0]) { + printk(KERN_ERR "dmascc: " + "could not allocate memory for %s at %#3x\n", + hw[type].name, card_base); + goto out1; + } + + info->dev[1] = alloc_netdev(0, "", dev_setup); + if (!info->dev[1]) { + printk(KERN_ERR "dmascc: " + "could not allocate memory for %s at %#3x\n", + hw[type].name, card_base); + goto out2; + } + spin_lock_init(&info->register_lock); + + priv = &info->priv[0]; + priv->type = type; + priv->card_base = card_base; + priv->scc_cmd = scc_base + SCCA_CMD; + priv->scc_data = scc_base + SCCA_DATA; + priv->register_lock = &info->register_lock; + + /* Reset SCC */ + write_scc(priv, R9, FHWRES | MIE | NV); + + /* Determine type of chip by enabling SDLC/HDLC enhancements */ + write_scc(priv, R15, SHDLCE); + if (!read_scc(priv, R15)) { + /* WR7' not present. This is an ordinary Z8530 SCC. */ + chip = Z8530; + } else { + /* Put one character in TX FIFO */ + write_scc_data(priv, 0, 0); + if (read_scc(priv, R0) & Tx_BUF_EMP) { + /* TX FIFO not full. This is a Z85230 ESCC with a 4-byte FIFO. */ + chip = Z85230; + } else { + /* TX FIFO full. This is a Z85C30 SCC with a 1-byte FIFO. */ + chip = Z85C30; + } + } + write_scc(priv, R15, 0); + + /* Start IRQ auto-detection */ + irqs = probe_irq_on(); + + /* Enable interrupts */ + if (type == TYPE_TWIN) { + outb(0, card_base + TWIN_DMA_CFG); + inb(card_base + TWIN_CLR_TMR1); + inb(card_base + TWIN_CLR_TMR2); + info->twin_serial_cfg = TWIN_EI; + outb(info->twin_serial_cfg, card_base + TWIN_SERIAL_CFG); + } else { + write_scc(priv, R15, CTSIE); + write_scc(priv, R0, RES_EXT_INT); + write_scc(priv, R1, EXT_INT_ENAB); + } + + /* Start timer */ + outb(1, tmr_base + TMR_CNT1); + outb(0, tmr_base + TMR_CNT1); + + /* Wait and detect IRQ */ + time = jiffies; + while (jiffies - time < 2 + HZ / TMR_0_HZ); + irq = probe_irq_off(irqs); + + /* Clear pending interrupt, disable interrupts */ + if (type == TYPE_TWIN) { + inb(card_base + TWIN_CLR_TMR1); + } else { + write_scc(priv, R1, 0); + write_scc(priv, R15, 0); + write_scc(priv, R0, RES_EXT_INT); + } + + if (irq <= 0) { + printk(KERN_ERR + "dmascc: could not find irq of %s at %#3x (irq=%d)\n", + hw[type].name, card_base, irq); + goto out3; + } + + /* Set up data structures */ + for (i = 0; i < 2; i++) { + dev = info->dev[i]; + priv = &info->priv[i]; + priv->type = type; + priv->chip = chip; + priv->dev = dev; + priv->info = info; + priv->channel = i; + spin_lock_init(&priv->ring_lock); + priv->register_lock = &info->register_lock; + priv->card_base = card_base; + priv->scc_cmd = scc_base + (i ? SCCB_CMD : SCCA_CMD); + priv->scc_data = scc_base + (i ? SCCB_DATA : SCCA_DATA); + priv->tmr_cnt = tmr_base + (i ? TMR_CNT2 : TMR_CNT1); + priv->tmr_ctrl = tmr_base + TMR_CTRL; + priv->tmr_mode = i ? 0xb0 : 0x70; + priv->param.pclk_hz = hw[type].pclk_hz; + priv->param.brg_tc = -1; + priv->param.clocks = TCTRxCP | RCRTxCP; + priv->param.persist = 256; + priv->param.dma = -1; + INIT_WORK(&priv->rx_work, rx_bh, priv); + dev->priv = priv; + sprintf(dev->name, "dmascc%i", 2 * n + i); + SET_MODULE_OWNER(dev); + dev->base_addr = card_base; + dev->irq = irq; + dev->open = scc_open; + dev->stop = scc_close; + dev->do_ioctl = scc_ioctl; + dev->hard_start_xmit = scc_send_packet; + dev->get_stats = scc_get_stats; + dev->hard_header = ax25_encapsulate; + dev->rebuild_header = ax25_rebuild_header; + dev->set_mac_address = scc_set_mac_address; + } + if (register_netdev(info->dev[0])) { + printk(KERN_ERR "dmascc: could not register %s\n", + info->dev[0]->name); + goto out3; + } + if (register_netdev(info->dev[1])) { + printk(KERN_ERR "dmascc: could not register %s\n", + info->dev[1]->name); + goto out4; + } + + + info->next = first; + first = info; + printk(KERN_INFO "dmascc: found %s (%s) at %#3x, irq %d\n", + hw[type].name, chipnames[chip], card_base, irq); + return 0; + + out4: + unregister_netdev(info->dev[0]); + out3: + if (info->priv[0].type == TYPE_TWIN) + outb(0, info->dev[0]->base_addr + TWIN_SERIAL_CFG); + write_scc(&info->priv[0], R9, FHWRES); + free_netdev(info->dev[1]); + out2: + free_netdev(info->dev[0]); + out1: + kfree(info); + out: + return -1; +} + + +/* Driver functions */ + +static void write_scc(struct scc_priv *priv, int reg, int val) +{ + unsigned long flags; + switch (priv->type) { + case TYPE_S5: + if (reg) + outb(reg, priv->scc_cmd); + outb(val, priv->scc_cmd); + return; + case TYPE_TWIN: + if (reg) + outb_p(reg, priv->scc_cmd); + outb_p(val, priv->scc_cmd); + return; + default: + spin_lock_irqsave(priv->register_lock, flags); + outb_p(0, priv->card_base + PI_DREQ_MASK); + if (reg) + outb_p(reg, priv->scc_cmd); + outb_p(val, priv->scc_cmd); + outb(1, priv->card_base + PI_DREQ_MASK); + spin_unlock_irqrestore(priv->register_lock, flags); + return; + } +} + + +static void write_scc_data(struct scc_priv *priv, int val, int fast) +{ + unsigned long flags; + switch (priv->type) { + case TYPE_S5: + outb(val, priv->scc_data); + return; + case TYPE_TWIN: + outb_p(val, priv->scc_data); + return; + default: + if (fast) + outb_p(val, priv->scc_data); + else { + spin_lock_irqsave(priv->register_lock, flags); + outb_p(0, priv->card_base + PI_DREQ_MASK); + outb_p(val, priv->scc_data); + outb(1, priv->card_base + PI_DREQ_MASK); + spin_unlock_irqrestore(priv->register_lock, flags); + } + return; + } +} + + +static int read_scc(struct scc_priv *priv, int reg) +{ + int rc; + unsigned long flags; + switch (priv->type) { + case TYPE_S5: + if (reg) + outb(reg, priv->scc_cmd); + return inb(priv->scc_cmd); + case TYPE_TWIN: + if (reg) + outb_p(reg, priv->scc_cmd); + return inb_p(priv->scc_cmd); + default: + spin_lock_irqsave(priv->register_lock, flags); + outb_p(0, priv->card_base + PI_DREQ_MASK); + if (reg) + outb_p(reg, priv->scc_cmd); + rc = inb_p(priv->scc_cmd); + outb(1, priv->card_base + PI_DREQ_MASK); + spin_unlock_irqrestore(priv->register_lock, flags); + return rc; + } +} + + +static int read_scc_data(struct scc_priv *priv) +{ + int rc; + unsigned long flags; + switch (priv->type) { + case TYPE_S5: + return inb(priv->scc_data); + case TYPE_TWIN: + return inb_p(priv->scc_data); + default: + spin_lock_irqsave(priv->register_lock, flags); + outb_p(0, priv->card_base + PI_DREQ_MASK); + rc = inb_p(priv->scc_data); + outb(1, priv->card_base + PI_DREQ_MASK); + spin_unlock_irqrestore(priv->register_lock, flags); + return rc; + } +} + + +static int scc_open(struct net_device *dev) +{ + struct scc_priv *priv = dev->priv; + struct scc_info *info = priv->info; + int card_base = priv->card_base; + + /* Request IRQ if not already used by other channel */ + if (!info->irq_used) { + if (request_irq(dev->irq, scc_isr, 0, "dmascc", info)) { + return -EAGAIN; + } + } + info->irq_used++; + + /* Request DMA if required */ + if (priv->param.dma >= 0) { + if (request_dma(priv->param.dma, "dmascc")) { + if (--info->irq_used == 0) + free_irq(dev->irq, info); + return -EAGAIN; + } else { + unsigned long flags = claim_dma_lock(); + clear_dma_ff(priv->param.dma); + release_dma_lock(flags); + } + } + + /* Initialize local variables */ + priv->rx_ptr = 0; + priv->rx_over = 0; + priv->rx_head = priv->rx_tail = priv->rx_count = 0; + priv->state = IDLE; + priv->tx_head = priv->tx_tail = priv->tx_count = 0; + priv->tx_ptr = 0; + + /* Reset channel */ + write_scc(priv, R9, (priv->channel ? CHRB : CHRA) | MIE | NV); + /* X1 clock, SDLC mode */ + write_scc(priv, R4, SDLC | X1CLK); + /* DMA */ + write_scc(priv, R1, EXT_INT_ENAB | WT_FN_RDYFN); + /* 8 bit RX char, RX disable */ + write_scc(priv, R3, Rx8); + /* 8 bit TX char, TX disable */ + write_scc(priv, R5, Tx8); + /* SDLC address field */ + write_scc(priv, R6, 0); + /* SDLC flag */ + write_scc(priv, R7, FLAG); + switch (priv->chip) { + case Z85C30: + /* Select WR7' */ + write_scc(priv, R15, SHDLCE); + /* Auto EOM reset */ + write_scc(priv, R7, AUTOEOM); + write_scc(priv, R15, 0); + break; + case Z85230: + /* Select WR7' */ + write_scc(priv, R15, SHDLCE); + /* The following bits are set (see 2.5.2.1): + - Automatic EOM reset + - Interrupt request if RX FIFO is half full + This bit should be ignored in DMA mode (according to the + documentation), but actually isn't. The receiver doesn't work if + it is set. Thus, we have to clear it in DMA mode. + - Interrupt/DMA request if TX FIFO is completely empty + a) If set, the ESCC behaves as if it had no TX FIFO (Z85C30 + compatibility). + b) If cleared, DMA requests may follow each other very quickly, + filling up the TX FIFO. + Advantage: TX works even in case of high bus latency. + Disadvantage: Edge-triggered DMA request circuitry may miss + a request. No more data is delivered, resulting + in a TX FIFO underrun. + Both PI2 and S5SCC/DMA seem to work fine with TXFIFOE cleared. + The PackeTwin doesn't. I don't know about the PI, but let's + assume it behaves like the PI2. + */ + if (priv->param.dma >= 0) { + if (priv->type == TYPE_TWIN) + write_scc(priv, R7, AUTOEOM | TXFIFOE); + else + write_scc(priv, R7, AUTOEOM); + } else { + write_scc(priv, R7, AUTOEOM | RXFIFOH); + } + write_scc(priv, R15, 0); + break; + } + /* Preset CRC, NRZ(I) encoding */ + write_scc(priv, R10, CRCPS | (priv->param.nrzi ? NRZI : NRZ)); + + /* Configure baud rate generator */ + if (priv->param.brg_tc >= 0) { + /* Program BR generator */ + write_scc(priv, R12, priv->param.brg_tc & 0xFF); + write_scc(priv, R13, (priv->param.brg_tc >> 8) & 0xFF); + /* BRG source = SYS CLK; enable BRG; DTR REQ function (required by + PackeTwin, not connected on the PI2); set DPLL source to BRG */ + write_scc(priv, R14, SSBR | DTRREQ | BRSRC | BRENABL); + /* Enable DPLL */ + write_scc(priv, R14, SEARCH | DTRREQ | BRSRC | BRENABL); + } else { + /* Disable BR generator */ + write_scc(priv, R14, DTRREQ | BRSRC); + } + + /* Configure clocks */ + if (priv->type == TYPE_TWIN) { + /* Disable external TX clock receiver */ + outb((info->twin_serial_cfg &= + ~(priv->channel ? TWIN_EXTCLKB : TWIN_EXTCLKA)), + card_base + TWIN_SERIAL_CFG); + } + write_scc(priv, R11, priv->param.clocks); + if ((priv->type == TYPE_TWIN) && !(priv->param.clocks & TRxCOI)) { + /* Enable external TX clock receiver */ + outb((info->twin_serial_cfg |= + (priv->channel ? TWIN_EXTCLKB : TWIN_EXTCLKA)), + card_base + TWIN_SERIAL_CFG); + } + + /* Configure PackeTwin */ + if (priv->type == TYPE_TWIN) { + /* Assert DTR, enable interrupts */ + outb((info->twin_serial_cfg |= TWIN_EI | + (priv->channel ? TWIN_DTRB_ON : TWIN_DTRA_ON)), + card_base + TWIN_SERIAL_CFG); + } + + /* Read current status */ + priv->rr0 = read_scc(priv, R0); + /* Enable DCD interrupt */ + write_scc(priv, R15, DCDIE); + + netif_start_queue(dev); + + return 0; +} + + +static int scc_close(struct net_device *dev) +{ + struct scc_priv *priv = dev->priv; + struct scc_info *info = priv->info; + int card_base = priv->card_base; + + netif_stop_queue(dev); + + if (priv->type == TYPE_TWIN) { + /* Drop DTR */ + outb((info->twin_serial_cfg &= + (priv->channel ? ~TWIN_DTRB_ON : ~TWIN_DTRA_ON)), + card_base + TWIN_SERIAL_CFG); + } + + /* Reset channel, free DMA and IRQ */ + write_scc(priv, R9, (priv->channel ? CHRB : CHRA) | MIE | NV); + if (priv->param.dma >= 0) { + if (priv->type == TYPE_TWIN) + outb(0, card_base + TWIN_DMA_CFG); + free_dma(priv->param.dma); + } + if (--info->irq_used == 0) + free_irq(dev->irq, info); + + return 0; +} + + +static int scc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct scc_priv *priv = dev->priv; + + switch (cmd) { + case SIOCGSCCPARAM: + if (copy_to_user + (ifr->ifr_data, &priv->param, + sizeof(struct scc_param))) + return -EFAULT; + return 0; + case SIOCSSCCPARAM: + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + if (netif_running(dev)) + return -EAGAIN; + if (copy_from_user + (&priv->param, ifr->ifr_data, + sizeof(struct scc_param))) + return -EFAULT; + return 0; + default: + return -EINVAL; + } +} + + +static int scc_send_packet(struct sk_buff *skb, struct net_device *dev) +{ + struct scc_priv *priv = dev->priv; + unsigned long flags; + int i; + + /* Temporarily stop the scheduler feeding us packets */ + netif_stop_queue(dev); + + /* Transfer data to DMA buffer */ + i = priv->tx_head; + memcpy(priv->tx_buf[i], skb->data + 1, skb->len - 1); + priv->tx_len[i] = skb->len - 1; + + /* Clear interrupts while we touch our circular buffers */ + + spin_lock_irqsave(&priv->ring_lock, flags); + /* Move the ring buffer's head */ + priv->tx_head = (i + 1) % NUM_TX_BUF; + priv->tx_count++; + + /* If we just filled up the last buffer, leave queue stopped. + The higher layers must wait until we have a DMA buffer + to accept the data. */ + if (priv->tx_count < NUM_TX_BUF) + netif_wake_queue(dev); + + /* Set new TX state */ + if (priv->state == IDLE) { + /* Assert RTS, start timer */ + priv->state = TX_HEAD; + priv->tx_start = jiffies; + write_scc(priv, R5, TxCRC_ENAB | RTS | TxENAB | Tx8); + write_scc(priv, R15, 0); + start_timer(priv, priv->param.txdelay, 0); + } + + /* Turn interrupts back on and free buffer */ + spin_unlock_irqrestore(&priv->ring_lock, flags); + dev_kfree_skb(skb); + + return 0; +} + + +static struct net_device_stats *scc_get_stats(struct net_device *dev) +{ + struct scc_priv *priv = dev->priv; + + return &priv->stats; +} + + +static int scc_set_mac_address(struct net_device *dev, void *sa) +{ + memcpy(dev->dev_addr, ((struct sockaddr *) sa)->sa_data, + dev->addr_len); + return 0; +} + + +static inline void tx_on(struct scc_priv *priv) +{ + int i, n; + unsigned long flags; + + if (priv->param.dma >= 0) { + n = (priv->chip == Z85230) ? 3 : 1; + /* Program DMA controller */ + flags = claim_dma_lock(); + set_dma_mode(priv->param.dma, DMA_MODE_WRITE); + set_dma_addr(priv->param.dma, + (int) priv->tx_buf[priv->tx_tail] + n); + set_dma_count(priv->param.dma, + priv->tx_len[priv->tx_tail] - n); + release_dma_lock(flags); + /* Enable TX underrun interrupt */ + write_scc(priv, R15, TxUIE); + /* Configure DREQ */ + if (priv->type == TYPE_TWIN) + outb((priv->param.dma == + 1) ? TWIN_DMA_HDX_T1 : TWIN_DMA_HDX_T3, + priv->card_base + TWIN_DMA_CFG); + else + write_scc(priv, R1, + EXT_INT_ENAB | WT_FN_RDYFN | + WT_RDY_ENAB); + /* Write first byte(s) */ + spin_lock_irqsave(priv->register_lock, flags); + for (i = 0; i < n; i++) + write_scc_data(priv, + priv->tx_buf[priv->tx_tail][i], 1); + enable_dma(priv->param.dma); + spin_unlock_irqrestore(priv->register_lock, flags); + } else { + write_scc(priv, R15, TxUIE); + write_scc(priv, R1, + EXT_INT_ENAB | WT_FN_RDYFN | TxINT_ENAB); + tx_isr(priv); + } + /* Reset EOM latch if we do not have the AUTOEOM feature */ + if (priv->chip == Z8530) + write_scc(priv, R0, RES_EOM_L); +} + + +static inline void rx_on(struct scc_priv *priv) +{ + unsigned long flags; + + /* Clear RX FIFO */ + while (read_scc(priv, R0) & Rx_CH_AV) + read_scc_data(priv); + priv->rx_over = 0; + if (priv->param.dma >= 0) { + /* Program DMA controller */ + flags = claim_dma_lock(); + set_dma_mode(priv->param.dma, DMA_MODE_READ); + set_dma_addr(priv->param.dma, + (int) priv->rx_buf[priv->rx_head]); + set_dma_count(priv->param.dma, BUF_SIZE); + release_dma_lock(flags); + enable_dma(priv->param.dma); + /* Configure PackeTwin DMA */ + if (priv->type == TYPE_TWIN) { + outb((priv->param.dma == + 1) ? TWIN_DMA_HDX_R1 : TWIN_DMA_HDX_R3, + priv->card_base + TWIN_DMA_CFG); + } + /* Sp. cond. intr. only, ext int enable, RX DMA enable */ + write_scc(priv, R1, EXT_INT_ENAB | INT_ERR_Rx | + WT_RDY_RT | WT_FN_RDYFN | WT_RDY_ENAB); + } else { + /* Reset current frame */ + priv->rx_ptr = 0; + /* Intr. on all Rx characters and Sp. cond., ext int enable */ + write_scc(priv, R1, EXT_INT_ENAB | INT_ALL_Rx | WT_RDY_RT | + WT_FN_RDYFN); + } + write_scc(priv, R0, ERR_RES); + write_scc(priv, R3, RxENABLE | Rx8 | RxCRC_ENAB); +} + + +static inline void rx_off(struct scc_priv *priv) +{ + /* Disable receiver */ + write_scc(priv, R3, Rx8); + /* Disable DREQ / RX interrupt */ + if (priv->param.dma >= 0 && priv->type == TYPE_TWIN) + outb(0, priv->card_base + TWIN_DMA_CFG); + else + write_scc(priv, R1, EXT_INT_ENAB | WT_FN_RDYFN); + /* Disable DMA */ + if (priv->param.dma >= 0) + disable_dma(priv->param.dma); +} + + +static void start_timer(struct scc_priv *priv, int t, int r15) +{ + unsigned long flags; + + outb(priv->tmr_mode, priv->tmr_ctrl); + if (t == 0) { + tm_isr(priv); + } else if (t > 0) { + save_flags(flags); + cli(); + outb(t & 0xFF, priv->tmr_cnt); + outb((t >> 8) & 0xFF, priv->tmr_cnt); + if (priv->type != TYPE_TWIN) { + write_scc(priv, R15, r15 | CTSIE); + priv->rr0 |= CTS; + } + restore_flags(flags); + } +} + + +static inline unsigned char random(void) +{ + /* See "Numerical Recipes in C", second edition, p. 284 */ + rand = rand * 1664525L + 1013904223L; + return (unsigned char) (rand >> 24); +} + +static inline void z8530_isr(struct scc_info *info) +{ + int is, i = 100; + + while ((is = read_scc(&info->priv[0], R3)) && i--) { + if (is & CHARxIP) { + rx_isr(&info->priv[0]); + } else if (is & CHATxIP) { + tx_isr(&info->priv[0]); + } else if (is & CHAEXT) { + es_isr(&info->priv[0]); + } else if (is & CHBRxIP) { + rx_isr(&info->priv[1]); + } else if (is & CHBTxIP) { + tx_isr(&info->priv[1]); + } else { + es_isr(&info->priv[1]); + } + write_scc(&info->priv[0], R0, RES_H_IUS); + i++; + } + if (i < 0) { + printk(KERN_ERR "dmascc: stuck in ISR with RR3=0x%02x.\n", + is); + } + /* Ok, no interrupts pending from this 8530. The INT line should + be inactive now. */ +} + + +static irqreturn_t scc_isr(int irq, void *dev_id, struct pt_regs *regs) +{ + struct scc_info *info = dev_id; + + spin_lock(info->priv[0].register_lock); + /* At this point interrupts are enabled, and the interrupt under service + is already acknowledged, but masked off. + + Interrupt processing: We loop until we know that the IRQ line is + low. If another positive edge occurs afterwards during the ISR, + another interrupt will be triggered by the interrupt controller + as soon as the IRQ level is enabled again (see asm/irq.h). + + Bottom-half handlers will be processed after scc_isr(). This is + important, since we only have small ringbuffers and want new data + to be fetched/delivered immediately. */ + + if (info->priv[0].type == TYPE_TWIN) { + int is, card_base = info->priv[0].card_base; + while ((is = ~inb(card_base + TWIN_INT_REG)) & + TWIN_INT_MSK) { + if (is & TWIN_SCC_MSK) { + z8530_isr(info); + } else if (is & TWIN_TMR1_MSK) { + inb(card_base + TWIN_CLR_TMR1); + tm_isr(&info->priv[0]); + } else { + inb(card_base + TWIN_CLR_TMR2); + tm_isr(&info->priv[1]); + } + } + } else + z8530_isr(info); + spin_unlock(info->priv[0].register_lock); + return IRQ_HANDLED; +} + + +static void rx_isr(struct scc_priv *priv) +{ + if (priv->param.dma >= 0) { + /* Check special condition and perform error reset. See 2.4.7.5. */ + special_condition(priv, read_scc(priv, R1)); + write_scc(priv, R0, ERR_RES); + } else { + /* Check special condition for each character. Error reset not necessary. + Same algorithm for SCC and ESCC. See 2.4.7.1 and 2.4.7.4. */ + int rc; + while (read_scc(priv, R0) & Rx_CH_AV) { + rc = read_scc(priv, R1); + if (priv->rx_ptr < BUF_SIZE) + priv->rx_buf[priv->rx_head][priv-> + rx_ptr++] = + read_scc_data(priv); + else { + priv->rx_over = 2; + read_scc_data(priv); + } + special_condition(priv, rc); + } + } +} + + +static void special_condition(struct scc_priv *priv, int rc) +{ + int cb; + unsigned long flags; + + /* See Figure 2-15. Only overrun and EOF need to be checked. */ + + if (rc & Rx_OVR) { + /* Receiver overrun */ + priv->rx_over = 1; + if (priv->param.dma < 0) + write_scc(priv, R0, ERR_RES); + } else if (rc & END_FR) { + /* End of frame. Get byte count */ + if (priv->param.dma >= 0) { + flags = claim_dma_lock(); + cb = BUF_SIZE - get_dma_residue(priv->param.dma) - + 2; + release_dma_lock(flags); + } else { + cb = priv->rx_ptr - 2; + } + if (priv->rx_over) { + /* We had an overrun */ + priv->stats.rx_errors++; + if (priv->rx_over == 2) + priv->stats.rx_length_errors++; + else + priv->stats.rx_fifo_errors++; + priv->rx_over = 0; + } else if (rc & CRC_ERR) { + /* Count invalid CRC only if packet length >= minimum */ + if (cb >= 15) { + priv->stats.rx_errors++; + priv->stats.rx_crc_errors++; + } + } else { + if (cb >= 15) { + if (priv->rx_count < NUM_RX_BUF - 1) { + /* Put good frame in FIFO */ + priv->rx_len[priv->rx_head] = cb; + priv->rx_head = + (priv->rx_head + + 1) % NUM_RX_BUF; + priv->rx_count++; + schedule_work(&priv->rx_work); + } else { + priv->stats.rx_errors++; + priv->stats.rx_over_errors++; + } + } + } + /* Get ready for new frame */ + if (priv->param.dma >= 0) { + flags = claim_dma_lock(); + set_dma_addr(priv->param.dma, + (int) priv->rx_buf[priv->rx_head]); + set_dma_count(priv->param.dma, BUF_SIZE); + release_dma_lock(flags); + } else { + priv->rx_ptr = 0; + } + } +} + + +static void rx_bh(void *arg) +{ + struct scc_priv *priv = arg; + int i = priv->rx_tail; + int cb; + unsigned long flags; + struct sk_buff *skb; + unsigned char *data; + + spin_lock_irqsave(&priv->ring_lock, flags); + while (priv->rx_count) { + spin_unlock_irqrestore(&priv->ring_lock, flags); + cb = priv->rx_len[i]; + /* Allocate buffer */ + skb = dev_alloc_skb(cb + 1); + if (skb == NULL) { + /* Drop packet */ + priv->stats.rx_dropped++; + } else { + /* Fill buffer */ + data = skb_put(skb, cb + 1); + data[0] = 0; + memcpy(&data[1], priv->rx_buf[i], cb); + skb->dev = priv->dev; + skb->protocol = ntohs(ETH_P_AX25); + skb->mac.raw = skb->data; + netif_rx(skb); + priv->dev->last_rx = jiffies; + priv->stats.rx_packets++; + priv->stats.rx_bytes += cb; + } + spin_lock_irqsave(&priv->ring_lock, flags); + /* Move tail */ + priv->rx_tail = i = (i + 1) % NUM_RX_BUF; + priv->rx_count--; + } + spin_unlock_irqrestore(&priv->ring_lock, flags); +} + + +static void tx_isr(struct scc_priv *priv) +{ + int i = priv->tx_tail, p = priv->tx_ptr; + + /* Suspend TX interrupts if we don't want to send anything. + See Figure 2-22. */ + if (p == priv->tx_len[i]) { + write_scc(priv, R0, RES_Tx_P); + return; + } + + /* Write characters */ + while ((read_scc(priv, R0) & Tx_BUF_EMP) && p < priv->tx_len[i]) { + write_scc_data(priv, priv->tx_buf[i][p++], 0); + } + + /* Reset EOM latch of Z8530 */ + if (!priv->tx_ptr && p && priv->chip == Z8530) + write_scc(priv, R0, RES_EOM_L); + + priv->tx_ptr = p; +} + + +static void es_isr(struct scc_priv *priv) +{ + int i, rr0, drr0, res; + unsigned long flags; + + /* Read status, reset interrupt bit (open latches) */ + rr0 = read_scc(priv, R0); + write_scc(priv, R0, RES_EXT_INT); + drr0 = priv->rr0 ^ rr0; + priv->rr0 = rr0; + + /* Transmit underrun (2.4.9.6). We can't check the TxEOM flag, since + it might have already been cleared again by AUTOEOM. */ + if (priv->state == TX_DATA) { + /* Get remaining bytes */ + i = priv->tx_tail; + if (priv->param.dma >= 0) { + disable_dma(priv->param.dma); + flags = claim_dma_lock(); + res = get_dma_residue(priv->param.dma); + release_dma_lock(flags); + } else { + res = priv->tx_len[i] - priv->tx_ptr; + priv->tx_ptr = 0; + } + /* Disable DREQ / TX interrupt */ + if (priv->param.dma >= 0 && priv->type == TYPE_TWIN) + outb(0, priv->card_base + TWIN_DMA_CFG); + else + write_scc(priv, R1, EXT_INT_ENAB | WT_FN_RDYFN); + if (res) { + /* Update packet statistics */ + priv->stats.tx_errors++; + priv->stats.tx_fifo_errors++; + /* Other underrun interrupts may already be waiting */ + write_scc(priv, R0, RES_EXT_INT); + write_scc(priv, R0, RES_EXT_INT); + } else { + /* Update packet statistics */ + priv->stats.tx_packets++; + priv->stats.tx_bytes += priv->tx_len[i]; + /* Remove frame from FIFO */ + priv->tx_tail = (i + 1) % NUM_TX_BUF; + priv->tx_count--; + /* Inform upper layers */ + netif_wake_queue(priv->dev); + } + /* Switch state */ + write_scc(priv, R15, 0); + if (priv->tx_count && + (jiffies - priv->tx_start) < priv->param.txtimeout) { + priv->state = TX_PAUSE; + start_timer(priv, priv->param.txpause, 0); + } else { + priv->state = TX_TAIL; + start_timer(priv, priv->param.txtail, 0); + } + } + + /* DCD transition */ + if (drr0 & DCD) { + if (rr0 & DCD) { + switch (priv->state) { + case IDLE: + case WAIT: + priv->state = DCD_ON; + write_scc(priv, R15, 0); + start_timer(priv, priv->param.dcdon, 0); + } + } else { + switch (priv->state) { + case RX_ON: + rx_off(priv); + priv->state = DCD_OFF; + write_scc(priv, R15, 0); + start_timer(priv, priv->param.dcdoff, 0); + } + } + } + + /* CTS transition */ + if ((drr0 & CTS) && (~rr0 & CTS) && priv->type != TYPE_TWIN) + tm_isr(priv); + +} + + +static void tm_isr(struct scc_priv *priv) +{ + switch (priv->state) { + case TX_HEAD: + case TX_PAUSE: + tx_on(priv); + priv->state = TX_DATA; + break; + case TX_TAIL: + write_scc(priv, R5, TxCRC_ENAB | Tx8); + priv->state = RTS_OFF; + if (priv->type != TYPE_TWIN) + write_scc(priv, R15, 0); + start_timer(priv, priv->param.rtsoff, 0); + break; + case RTS_OFF: + write_scc(priv, R15, DCDIE); + priv->rr0 = read_scc(priv, R0); + if (priv->rr0 & DCD) { + priv->stats.collisions++; + rx_on(priv); + priv->state = RX_ON; + } else { + priv->state = WAIT; + start_timer(priv, priv->param.waittime, DCDIE); + } + break; + case WAIT: + if (priv->tx_count) { + priv->state = TX_HEAD; + priv->tx_start = jiffies; + write_scc(priv, R5, + TxCRC_ENAB | RTS | TxENAB | Tx8); + write_scc(priv, R15, 0); + start_timer(priv, priv->param.txdelay, 0); + } else { + priv->state = IDLE; + if (priv->type != TYPE_TWIN) + write_scc(priv, R15, DCDIE); + } + break; + case DCD_ON: + case DCD_OFF: + write_scc(priv, R15, DCDIE); + priv->rr0 = read_scc(priv, R0); + if (priv->rr0 & DCD) { + rx_on(priv); + priv->state = RX_ON; + } else { + priv->state = WAIT; + start_timer(priv, + random() / priv->param.persist * + priv->param.slottime, DCDIE); + } + break; + } +} |