irda: move drivers/net/irda to drivers/staging/irda/drivers

Move the irda drivers from drivers/net/irda/ to
drivers/staging/irda/drivers as they will be deleted in a future kernel
release.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 0 insertions, 398 deletions

diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
deleted file mode 100644
index e070e1222733..000000000000
--- a/drivers/net/irda/Kconfig
+++ /dev/null
@@ -1,398 +0,0 @@
-menu "Infrared-port device drivers"
-	depends on IRDA!=n
-
-comment "SIR device drivers"
-
-config IRTTY_SIR
-	tristate "IrTTY (uses Linux serial driver)"
-	depends on IRDA && TTY
-	help
-	  Say Y here if you want to build support for the IrTTY line
-	  discipline.  To compile it as a module, choose M here: the module
-	  will be called irtty-sir. IrTTY makes it possible to use Linux's
-	  own serial driver for all IrDA ports that are 16550 compatible.
-	  Most IrDA chips are 16550 compatible so you should probably say Y
-	  to this option.  Using IrTTY will however limit the speed of the
-	  connection to 115200 bps (IrDA SIR mode).
-
-	  If unsure, say Y.
-
-config BFIN_SIR
-	tristate "Blackfin SIR on UART"
-	depends on BLACKFIN && IRDA
-	default n
-	help
-	  Say Y here if your want to enable SIR function on Blackfin UART
-	  devices.
-
-	  To activate this driver you can start irattach like:
-	  "irattach irda0 -s"
-
-	  Saying M, it will be built as a module named bfin_sir.
-
-	  Note that you need to turn off one of the serial drivers for SIR
-	  to use that UART.
-
-config BFIN_SIR0
-	bool "Blackfin SIR on UART0"
-	depends on BFIN_SIR && !SERIAL_BFIN_UART0
-
-config BFIN_SIR1
-	bool "Blackfin SIR on UART1"
-	depends on BFIN_SIR && !SERIAL_BFIN_UART1 && (!BF531 && !BF532 && !BF533 && !BF561)
-
-config BFIN_SIR2
-	bool "Blackfin SIR on UART2"
-	depends on BFIN_SIR && !SERIAL_BFIN_UART2 && (BF54x || BF538 || BF539)
-
-config BFIN_SIR3
-	bool "Blackfin SIR on UART3"
-	depends on BFIN_SIR && !SERIAL_BFIN_UART3 && (BF54x)
-
-choice
-	prompt "SIR Mode"
-	depends on BFIN_SIR
-	default SIR_BFIN_DMA
-
-config SIR_BFIN_DMA
-	bool "DMA mode"
-	depends on !DMA_UNCACHED_NONE
-
-config SIR_BFIN_PIO
-	bool "PIO mode"
-endchoice
-
-config SH_SIR
-	tristate "SuperH SIR on UART"
-	depends on IRDA && SUPERH && \
-		(CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7723 || \
-		 CPU_SUBTYPE_SH7724)
-	default n
-	help
-	  Say Y here if your want to enable SIR function on SuperH UART
-	  devices.
-
-comment "Dongle support"
-
-config DONGLE
-	bool "Serial dongle support"
-	depends on IRTTY_SIR
-	help
-	  Say Y here if you have an infrared device that connects to your
-	  computer's serial port. These devices are called dongles. Then say Y
-	  or M to the driver for your particular dongle below.
-
-	  Note that the answer to this question won't directly affect the
-	  kernel: saying N will just cause the configurator to skip all
-	  the questions about serial dongles.
-
-config ESI_DONGLE
-	tristate "ESI JetEye PC dongle"
-	depends on IRTTY_SIR && DONGLE && IRDA
-	help
-	  Say Y here if you want to build support for the Extended Systems
-	  JetEye PC dongle.  To compile it as a module, choose M here. The ESI
-	  dongle attaches to the normal 9-pin serial port connector, and can
-	  currently only be used by IrTTY.  To activate support for ESI
-	  dongles you will have to start irattach like this:
-	  "irattach -d esi".
-
-config ACTISYS_DONGLE
-	tristate "ACTiSYS IR-220L and IR220L+ dongle"
-	depends on IRTTY_SIR && DONGLE && IRDA
-	help
-	  Say Y here if you want to build support for the ACTiSYS IR-220L and
-	  IR220L+ dongles.  To compile it as a module, choose M here. The
-	  ACTiSYS dongles attaches to the normal 9-pin serial port connector,
-	  and can currently only be used by IrTTY.  To activate support for
-	  ACTiSYS dongles you will have to start irattach like this:
-	  "irattach -d actisys" or "irattach -d actisys+".
-
-config TEKRAM_DONGLE
-	tristate "Tekram IrMate 210B dongle"
-	depends on IRTTY_SIR && DONGLE && IRDA
-	help
-	  Say Y here if you want to build support for the Tekram IrMate 210B
-	  dongle.  To compile it as a module, choose M here. The Tekram dongle
-	  attaches to the normal 9-pin serial port connector, and can
-	  currently only be used by IrTTY.  To activate support for Tekram
-	  dongles you will have to start irattach like this:
-	  "irattach -d tekram".
-
-config TOIM3232_DONGLE
-	tristate "TOIM3232 IrDa dongle"
-	depends on IRTTY_SIR && DONGLE && IRDA
-	help
-	  Say Y here if you want to build support for the Vishay/Temic
-	  TOIM3232 and TOIM4232 based dongles.
-	  To compile it as a module, choose M here.
-
-config LITELINK_DONGLE
-	tristate "Parallax LiteLink dongle"
-	depends on IRTTY_SIR && DONGLE && IRDA
-	help
-	  Say Y here if you want to build support for the Parallax Litelink
-	  dongle.  To compile it as a module, choose M here.  The Parallax
-	  dongle attaches to the normal 9-pin serial port connector, and can
-	  currently only be used by IrTTY.  To activate support for Parallax
-	  dongles you will have to start irattach like this:
-	  "irattach -d litelink".
-
-config MA600_DONGLE
-	tristate "Mobile Action MA600 dongle"
-	depends on IRTTY_SIR && DONGLE && IRDA
-	help
-	  Say Y here if you want to build support for the Mobile Action MA600
-	  dongle.  To compile it as a module, choose M here. The MA600 dongle
-	  attaches to the normal 9-pin serial port connector, and can
-	  currently only be used by IrTTY.  The driver should also support
-	  the MA620 USB version of the dongle, if the integrated USB-to-RS232
-	  converter is supported by usbserial. To activate support for
-	  MA600 dongle you will have to start irattach like this:
-	  "irattach -d ma600".
-
-config GIRBIL_DONGLE
-	tristate "Greenwich GIrBIL dongle"
-	depends on IRTTY_SIR && DONGLE && IRDA
-	help
-	  Say Y here if you want to build support for the Greenwich GIrBIL
-	  dongle.  If you want to compile it as a module, choose M here.
-	  The Greenwich dongle attaches to the normal 9-pin serial port
-	  connector, and can currently only be used by IrTTY.  To activate
-	  support for Greenwich dongles you will have to start irattach
-	  like this: "irattach -d girbil".
-
-config MCP2120_DONGLE
-	tristate "Microchip MCP2120"
-	depends on IRTTY_SIR && DONGLE && IRDA
-	help
-	  Say Y here if you want to build support for the Microchip MCP2120
-	  dongle.  If you want to compile it as a module, choose M here.
-	  The MCP2120 dongle attaches to the normal 9-pin serial port
-	  connector, and can currently only be used by IrTTY.  To activate
-	  support for MCP2120 dongles you will have to start irattach
-	  like this: "irattach -d mcp2120".
-
-	  You must build this dongle yourself.  For more information see:
-	  <http://www.eyetap.org/~tangf/irda_sir_linux.html>
-
-config OLD_BELKIN_DONGLE
-	tristate "Old Belkin dongle"
-	depends on IRTTY_SIR && DONGLE && IRDA
-	help
-	  Say Y here if you want to build support for the Adaptec Airport 1000
-	  and 2000 dongles.  If you want to compile it as a module, choose
-	  M here. Some information is contained in the comments
-	  at the top of <file:drivers/net/irda/old_belkin-sir.c>.
-
-config ACT200L_DONGLE
-	tristate "ACTiSYS IR-200L dongle"
-	depends on IRTTY_SIR && DONGLE && IRDA
-	help
-	  Say Y here if you want to build support for the ACTiSYS IR-200L
-	  dongle. If you want to compile it as a module, choose M here.
-	  The ACTiSYS IR-200L dongle attaches to the normal 9-pin serial
-	  port connector, and can currently only be used by IrTTY.
-	  To activate support for ACTiSYS IR-200L dongle you will have to
-	  start irattach like this: "irattach -d act200l".
-
-config KINGSUN_DONGLE
-	tristate "KingSun/DonShine DS-620 IrDA-USB dongle"
-	depends on IRDA && USB
-	help
-	  Say Y or M here if you want to build support for the KingSun/DonShine
-	  DS-620 IrDA-USB bridge device driver.
-
-	  This USB bridge does not conform to the IrDA-USB device class
-	  specification, and therefore needs its own specific driver. This
-	  dongle supports SIR speed only (9600 bps).
-
-	  To compile it as a module, choose M here: the module will be called
-	  kingsun-sir.
-
-config KSDAZZLE_DONGLE
-	tristate "KingSun Dazzle IrDA-USB dongle"
-	depends on IRDA && USB
-	help
-	  Say Y or M here if you want to build support for the KingSun Dazzle
-	  IrDA-USB bridge device driver.
-
-	  This USB bridge does not conform to the IrDA-USB device class
-	  specification, and therefore needs its own specific driver. This
-	  dongle supports SIR speeds only (9600 through 115200 bps).
-
-	  To compile it as a module, choose M here: the module will be called
-	  ksdazzle-sir.
-
-config KS959_DONGLE
-	tristate "KingSun KS-959 IrDA-USB dongle"
-	depends on IRDA && USB
-	help
-	  Say Y or M here if you want to build support for the KingSun KS-959
-	  IrDA-USB bridge device driver.
-
-	  This USB bridge does not conform to the IrDA-USB device class
-	  specification, and therefore needs its own specific driver. This
-	  dongle supports SIR speeds only (9600 through 57600 bps).
-
-	  To compile it as a module, choose M here: the module will be called
-	  ks959-sir.
-
-comment "FIR device drivers"
-
-config USB_IRDA
-	tristate "IrDA USB dongles"
-	depends on IRDA && USB
-	select FW_LOADER
-	---help---
-	  Say Y here if you want to build support for the USB IrDA FIR Dongle
-	  device driver.  To compile it as a module, choose M here: the module
-	  will be called irda-usb.  IrDA-USB support the various IrDA USB
-	  dongles available and most of their peculiarities.  Those dongles
-	  plug in the USB port of your computer, are plug and play, and
-	  support SIR and FIR (4Mbps) speeds.  On the other hand, those
-	  dongles tend to be less efficient than a FIR chipset.
-
-	  Please note that the driver is still experimental.  And of course,
-	  you will need both USB and IrDA support in your kernel...
-
-config SIGMATEL_FIR
-	tristate "SigmaTel STIr4200 bridge"
-	depends on IRDA && USB
-	select CRC32
-	---help---
-	  Say Y here if you want to build support for the SigmaTel STIr4200
-	  USB IrDA FIR bridge device driver.  
-
-	  USB bridge based on the SigmaTel STIr4200 don't conform to the
-	  IrDA-USB device class specification, and therefore need their
-	  own specific driver. Those dongles support SIR and FIR (4Mbps)
-	  speeds. 
-
-	  To compile it as a module, choose M here: the module will be called
-	  stir4200.
-
-config NSC_FIR
-	tristate "NSC PC87108/PC87338"
-	depends on IRDA && ISA_DMA_API
-	help
-	  Say Y here if you want to build support for the NSC PC87108 and
-	  PC87338 IrDA chipsets.  This driver supports SIR,
-	  MIR and FIR (4Mbps) speeds.
-
-	  To compile it as a module, choose M here: the module will be called
-	  nsc-ircc.
-
-config WINBOND_FIR
-	tristate "Winbond W83977AF (IR)"
-	depends on IRDA && ISA_DMA_API
-	help
-	  Say Y here if you want to build IrDA support for the Winbond
-	  W83977AF super-io chipset.  This driver should be used for the IrDA
-	  chipset in the Corel NetWinder.  The driver supports SIR, MIR and
-	  FIR (4Mbps) speeds.
-
-	  To compile it as a module, choose M here: the module will be called
-	  w83977af_ir.
-
-config TOSHIBA_FIR
-	tristate "Toshiba Type-O IR Port"
-	depends on IRDA && PCI && !64BIT && VIRT_TO_BUS
-	help
-	  Say Y here if you want to build support for the Toshiba Type-O IR
-	  and Donau oboe chipsets. These chipsets are used by the Toshiba
-	  Libretto 100/110CT, Tecra 8100, Portege 7020 and many more laptops.
-	  To compile it as a module, choose M here: the module will be called
-	  donauboe.
-
-config AU1000_FIR
-	tristate "Alchemy IrDA SIR/FIR"
-	depends on IRDA && MIPS_ALCHEMY
-	help
-	  Say Y/M here to build support the IrDA peripheral on the
-	  Alchemy Au1000 and Au1100 SoCs.
-	  Say M to build a module; it will be called au1k_ir.ko
-
-config SMC_IRCC_FIR
-	tristate "SMSC IrCC"
-	depends on IRDA && ISA_DMA_API
-	help
-	  Say Y here if you want to build support for the SMC Infrared
-	  Communications Controller.  It is used in a wide variety of
-	  laptops (Fujitsu, Sony, Compaq and some Toshiba).
-	  To compile it as a module, choose M here: the module will be called
-	  smsc-ircc2.o.
-
-config ALI_FIR
-	tristate "ALi M5123 FIR"
-	depends on IRDA && ISA_DMA_API
-	help
-	  Say Y here if you want to build support for the ALi M5123 FIR
-	  Controller.  The ALi M5123 FIR Controller is embedded in ALi M1543C,
-	  M1535, M1535D, M1535+, M1535D South Bridge.  This driver supports
-	  SIR, MIR and FIR (4Mbps) speeds.
-
-	  To compile it as a module, choose M here: the module will be called
-	  ali-ircc.
-
-config VLSI_FIR
-	tristate "VLSI 82C147 SIR/MIR/FIR"
-	depends on IRDA && PCI
-	help
-	  Say Y here if you want to build support for the VLSI 82C147
-	  PCI-IrDA Controller. This controller is used by the HP OmniBook 800
-	  and 5500 notebooks. The driver provides support for SIR, MIR and
-	  FIR (4Mbps) speeds.
-
-	  To compile it as a module, choose M here: the module will be called
-	  vlsi_ir.
-
-config SA1100_FIR
-	tristate "SA1100 Internal IR"
-	depends on ARCH_SA1100 && IRDA && DMA_SA11X0
-
-config VIA_FIR
-	tristate "VIA VT8231/VT1211 SIR/MIR/FIR"
-	depends on IRDA && ISA_DMA_API
-	help
-	  Say Y here if you want to build support for the VIA VT8231
-	  and VIA VT1211 IrDA controllers, found on the motherboards using
-	  those VIA chipsets. To use this controller, you will need
-	  to plug a specific 5 pins FIR IrDA dongle in the specific
-	  motherboard connector. The driver provides support for SIR, MIR
-	  and FIR (4Mbps) speeds.
-
-	  You will need to specify the 'dongle_id' module parameter to
-	  indicate the FIR dongle attached to the controller.
-
-	  To compile it as a module, choose M here: the module will be called
-	  via-ircc.
-
-config PXA_FICP
-	tristate "Intel PXA2xx Internal FICP"
-	depends on ARCH_PXA && IRDA
-	help
-	  Say Y or M here if you want to build support for the PXA2xx
-	  built-in IRDA interface which can support both SIR and FIR.
-	  This driver relies on platform specific helper routines so
-	  available capabilities may vary from one PXA2xx target to
-	  another.
-
-config MCS_FIR
-	tristate "MosChip MCS7780 IrDA-USB dongle"
-	depends on IRDA && USB
-	select CRC32
-	help
-	  Say Y or M here if you want to build support for the MosChip
-	  MCS7780 IrDA-USB bridge device driver.
-
-	  USB bridge based on the MosChip MCS7780 don't conform to the
-	  IrDA-USB device class specification, and therefore need their
-	  own specific driver. Those dongles support SIR and FIR (4Mbps)
-	  speeds.
-
-	  To compile it as a module, choose M here: the module will be called
-	  mcs7780.
-
-endmenu
-