Merge branch 'origin' into devel-stable

Conflicts:
	arch/arm/mach-mx2/devices.c
	arch/arm/mach-mx2/devices.h
	sound/soc/pxa/pxa-ssp.c

1 files changed, 0 insertions, 718 deletions

diff --git a/drivers/net/isa-skeleton.c b/drivers/net/isa-skeleton.c
deleted file mode 100644
index 04d0502726c0..000000000000
--- a/drivers/net/isa-skeleton.c
+++ /dev/null
@@ -1,718 +0,0 @@
-/* isa-skeleton.c: A network driver outline for linux.
- *
- *	Written 1993-94 by Donald Becker.
- *
- *	Copyright 1993 United States Government as represented by the
- *	Director, National Security Agency.
- *
- *	This software may be used and distributed according to the terms
- *	of the GNU General Public License, incorporated herein by reference.
- *
- *	The author may be reached as becker@scyld.com, or C/O
- *	Scyld Computing Corporation
- *	410 Severn Ave., Suite 210
- *	Annapolis MD 21403
- *
- *	This file is an outline for writing a network device driver for the
- *	the Linux operating system.
- *
- *	To write (or understand) a driver, have a look at the "loopback.c" file to
- *	get a feel of what is going on, and then use the code below as a skeleton
- *	for the new driver.
- *
- */
-
-static const char *version =
-	"isa-skeleton.c:v1.51 9/24/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
-
-/*
- *  Sources:
- *	List your sources of programming information to document that
- *	the driver is your own creation, and give due credit to others
- *	that contributed to the work. Remember that GNU project code
- *	cannot use proprietary or trade secret information. Interface
- *	definitions are generally considered non-copyrightable to the
- *	extent that the same names and structures must be used to be
- *	compatible.
- *
- *	Finally, keep in mind that the Linux kernel is has an API, not
- *	ABI. Proprietary object-code-only distributions are not permitted
- *	under the GPL.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/bitops.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-
-/*
- * The name of the card. Is used for messages and in the requests for
- * io regions, irqs and dma channels
- */
-static const char* cardname = "netcard";
-
-/* First, a few definitions that the brave might change. */
-
-/* A zero-terminated list of I/O addresses to be probed. */
-static unsigned int netcard_portlist[] __initdata =
-   { 0x200, 0x240, 0x280, 0x2C0, 0x300, 0x320, 0x340, 0};
-
-/* use 0 for production, 1 for verification, >2 for debug */
-#ifndef NET_DEBUG
-#define NET_DEBUG 2
-#endif
-static unsigned int net_debug = NET_DEBUG;
-
-/* The number of low I/O ports used by the ethercard. */
-#define NETCARD_IO_EXTENT	32
-
-#define MY_TX_TIMEOUT  ((400*HZ)/1000)
-
-/* Information that need to be kept for each board. */
-struct net_local {
-	struct net_device_stats stats;
-	long open_time;			/* Useless example local info. */
-
-	/* Tx control lock.  This protects the transmit buffer ring
-	 * state along with the "tx full" state of the driver.  This
-	 * means all netif_queue flow control actions are protected
-	 * by this lock as well.
-	 */
-	spinlock_t lock;
-};
-
-/* The station (ethernet) address prefix, used for IDing the board. */
-#define SA_ADDR0 0x00
-#define SA_ADDR1 0x42
-#define SA_ADDR2 0x65
-
-/* Index to functions, as function prototypes. */
-
-static int	netcard_probe1(struct net_device *dev, int ioaddr);
-static int	net_open(struct net_device *dev);
-static int	net_send_packet(struct sk_buff *skb, struct net_device *dev);
-static irqreturn_t net_interrupt(int irq, void *dev_id);
-static void	net_rx(struct net_device *dev);
-static int	net_close(struct net_device *dev);
-static struct	net_device_stats *net_get_stats(struct net_device *dev);
-static void	set_multicast_list(struct net_device *dev);
-static void     net_tx_timeout(struct net_device *dev);
-
-
-/* Example routines you must write ;->. */
-#define tx_done(dev) 1
-static void	hardware_send_packet(short ioaddr, char *buf, int length);
-static void 	chipset_init(struct net_device *dev, int startp);
-
-/*
- * Check for a network adaptor of this type, and return '0' iff one exists.
- * If dev->base_addr == 0, probe all likely locations.
- * If dev->base_addr == 1, always return failure.
- * If dev->base_addr == 2, allocate space for the device and return success
- * (detachable devices only).
- */
-static int __init do_netcard_probe(struct net_device *dev)
-{
-	int i;
-	int base_addr = dev->base_addr;
-	int irq = dev->irq;
-
-	if (base_addr > 0x1ff)    /* Check a single specified location. */
-		return netcard_probe1(dev, base_addr);
-	else if (base_addr != 0)  /* Don't probe at all. */
-		return -ENXIO;
-
-	for (i = 0; netcard_portlist[i]; i++) {
-		int ioaddr = netcard_portlist[i];
-		if (netcard_probe1(dev, ioaddr) == 0)
-			return 0;
-		dev->irq = irq;
-	}
-
-	return -ENODEV;
-}
-
-static void cleanup_card(struct net_device *dev)
-{
-#ifdef jumpered_dma
-	free_dma(dev->dma);
-#endif
-#ifdef jumpered_interrupts
-	free_irq(dev->irq, dev);
-#endif
-	release_region(dev->base_addr, NETCARD_IO_EXTENT);
-}
-
-#ifndef MODULE
-struct net_device * __init netcard_probe(int unit)
-{
-	struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
-	int err;
-
-	if (!dev)
-		return ERR_PTR(-ENOMEM);
-
-	sprintf(dev->name, "eth%d", unit);
-	netdev_boot_setup_check(dev);
-
-	err = do_netcard_probe(dev);
-	if (err)
-		goto out;
-	return dev;
-out:
-	free_netdev(dev);
-	return ERR_PTR(err);
-}
-#endif
-
-static const struct net_device_ops netcard_netdev_ops = {
-	.ndo_open		= net_open,
-	.ndo_stop		= net_close,
-	.ndo_start_xmit		= net_send_packet,
-	.ndo_get_stats		= net_get_stats,
-	.ndo_set_multicast_list	= set_multicast_list,
-	.ndo_tx_timeout		= net_tx_timeout,
-	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_mac_address	= eth_mac_addr,
-	.ndo_change_mtu		= eth_change_mtu,
-};
-
-/*
- * This is the real probe routine. Linux has a history of friendly device
- * probes on the ISA bus. A good device probes avoids doing writes, and
- * verifies that the correct device exists and functions.
- */
-static int __init netcard_probe1(struct net_device *dev, int ioaddr)
-{
-	struct net_local *np;
-	static unsigned version_printed;
-	int i;
-	int err = -ENODEV;
-
-	/* Grab the region so that no one else tries to probe our ioports. */
-	if (!request_region(ioaddr, NETCARD_IO_EXTENT, cardname))
-		return -EBUSY;
-
-	/*
-	 * For ethernet adaptors the first three octets of the station address
-	 * contains the manufacturer's unique code. That might be a good probe
-	 * method. Ideally you would add additional checks.
-	 */
-	if (inb(ioaddr + 0) != SA_ADDR0 ||
-	    inb(ioaddr + 1) != SA_ADDR1 ||
-	    inb(ioaddr + 2) != SA_ADDR2)
-		goto out;
-
-	if (net_debug  &&  version_printed++ == 0)
-		printk(KERN_DEBUG "%s", version);
-
-	printk(KERN_INFO "%s: %s found at %#3x, ", dev->name, cardname, ioaddr);
-
-	/* Fill in the 'dev' fields. */
-	dev->base_addr = ioaddr;
-
-	/* Retrieve and print the ethernet address. */
-	for (i = 0; i < 6; i++)
-		dev->dev_addr[i] = inb(ioaddr + i);
-
-	printk("%pM", dev->dev_addr);
-
-	err = -EAGAIN;
-#ifdef jumpered_interrupts
-	/*
-	 * If this board has jumpered interrupts, allocate the interrupt
-	 * vector now. There is no point in waiting since no other device
-	 * can use the interrupt, and this marks the irq as busy. Jumpered
-	 * interrupts are typically not reported by the boards, and we must
-	 * used autoIRQ to find them.
-	 */
-
-	if (dev->irq == -1)
-		;	/* Do nothing: a user-level program will set it. */
-	else if (dev->irq < 2) {	/* "Auto-IRQ" */
-		unsigned long irq_mask = probe_irq_on();
-		/* Trigger an interrupt here. */
-
-		dev->irq = probe_irq_off(irq_mask);
-		if (net_debug >= 2)
-			printk(" autoirq is %d", dev->irq);
-	} else if (dev->irq == 2)
-		/*
-		 * Fixup for users that don't know that IRQ 2 is really
-		 * IRQ9, or don't know which one to set.
-		 */
-		dev->irq = 9;
-
-	{
-		int irqval = request_irq(dev->irq, net_interrupt, 0, cardname, dev);
-		if (irqval) {
-			printk("%s: unable to get IRQ %d (irqval=%d).\n",
-				   dev->name, dev->irq, irqval);
-			goto out;
-		}
-	}
-#endif	/* jumpered interrupt */
-#ifdef jumpered_dma
-	/*
-	 * If we use a jumpered DMA channel, that should be probed for and
-	 * allocated here as well. See lance.c for an example.
-	 */
-	if (dev->dma == 0) {
-		if (request_dma(dev->dma, cardname)) {
-			printk("DMA %d allocation failed.\n", dev->dma);
-			goto out1;
-		} else
-			printk(", assigned DMA %d.\n", dev->dma);
-	} else {
-		short dma_status, new_dma_status;
-
-		/* Read the DMA channel status registers. */
-		dma_status = ((inb(DMA1_STAT_REG) >> 4) & 0x0f) |
-			(inb(DMA2_STAT_REG) & 0xf0);
-		/* Trigger a DMA request, perhaps pause a bit. */
-		outw(0x1234, ioaddr + 8);
-		/* Re-read the DMA status registers. */
-		new_dma_status = ((inb(DMA1_STAT_REG) >> 4) & 0x0f) |
-			(inb(DMA2_STAT_REG) & 0xf0);
-		/*
-		 * Eliminate the old and floating requests,
-		 * and DMA4 the cascade.
-		 */
-		new_dma_status ^= dma_status;
-		new_dma_status &= ~0x10;
-		for (i = 7; i > 0; i--)
-			if (test_bit(i, &new_dma_status)) {
-				dev->dma = i;
-				break;
-			}
-		if (i <= 0) {
-			printk("DMA probe failed.\n");
-			goto out1;
-		}
-		if (request_dma(dev->dma, cardname)) {
-			printk("probed DMA %d allocation failed.\n", dev->dma);
-			goto out1;
-		}
-	}
-#endif	/* jumpered DMA */
-
-	np = netdev_priv(dev);
-	spin_lock_init(&np->lock);
-
-        dev->netdev_ops		= &netcard_netdev_ops;
-        dev->watchdog_timeo	= MY_TX_TIMEOUT;
-
-	err = register_netdev(dev);
-	if (err)
-		goto out2;
-	return 0;
-out2:
-#ifdef jumpered_dma
-	free_dma(dev->dma);
-#endif
-out1:
-#ifdef jumpered_interrupts
-	free_irq(dev->irq, dev);
-#endif
-out:
-	release_region(base_addr, NETCARD_IO_EXTENT);
-	return err;
-}
-
-static void net_tx_timeout(struct net_device *dev)
-{
-	struct net_local *np = netdev_priv(dev);
-
-	printk(KERN_WARNING "%s: transmit timed out, %s?\n", dev->name,
-	       tx_done(dev) ? "IRQ conflict" : "network cable problem");
-
-	/* Try to restart the adaptor. */
-	chipset_init(dev, 1);
-
-	np->stats.tx_errors++;
-
-	/* If we have space available to accept new transmit
-	 * requests, wake up the queueing layer.  This would
-	 * be the case if the chipset_init() call above just
-	 * flushes out the tx queue and empties it.
-	 *
-	 * If instead, the tx queue is retained then the
-	 * netif_wake_queue() call should be placed in the
-	 * TX completion interrupt handler of the driver instead
-	 * of here.
-	 */
-	if (!tx_full(dev))
-		netif_wake_queue(dev);
-}
-
-/*
- * Open/initialize the board. This is called (in the current kernel)
- * sometime after booting when the 'ifconfig' program is run.
- *
- * This routine should set everything up anew at each open, even
- * registers that "should" only need to be set once at boot, so that
- * there is non-reboot way to recover if something goes wrong.
- */
-static int
-net_open(struct net_device *dev)
-{
-	struct net_local *np = netdev_priv(dev);
-	int ioaddr = dev->base_addr;
-	/*
-	 * This is used if the interrupt line can turned off (shared).
-	 * See 3c503.c for an example of selecting the IRQ at config-time.
-	 */
-	if (request_irq(dev->irq, net_interrupt, 0, cardname, dev)) {
-		return -EAGAIN;
-	}
-	/*
-	 * Always allocate the DMA channel after the IRQ,
-	 * and clean up on failure.
-	 */
-	if (request_dma(dev->dma, cardname)) {
-		free_irq(dev->irq, dev);
-		return -EAGAIN;
-	}
-
-	/* Reset the hardware here. Don't forget to set the station address. */
-	chipset_init(dev, 1);
-	outb(0x00, ioaddr);
-	np->open_time = jiffies;
-
-	/* We are now ready to accept transmit requeusts from
-	 * the queueing layer of the networking.
-	 */
-	netif_start_queue(dev);
-
-	return 0;
-}
-
-/* This will only be invoked if your driver is _not_ in XOFF state.
- * What this means is that you need not check it, and that this
- * invariant will hold if you make sure that the netif_*_queue()
- * calls are done at the proper times.
- */
-static int net_send_packet(struct sk_buff *skb, struct net_device *dev)
-{
-	struct net_local *np = netdev_priv(dev);
-	int ioaddr = dev->base_addr;
-	short length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
-	unsigned char *buf = skb->data;
-
-	/* If some error occurs while trying to transmit this
-	 * packet, you should return '1' from this function.
-	 * In such a case you _may not_ do anything to the
-	 * SKB, it is still owned by the network queueing
-	 * layer when an error is returned.  This means you
-	 * may not modify any SKB fields, you may not free
-	 * the SKB, etc.
-	 */
-
-#if TX_RING
-	/* This is the most common case for modern hardware.
-	 * The spinlock protects this code from the TX complete
-	 * hardware interrupt handler.  Queue flow control is
-	 * thus managed under this lock as well.
-	 */
-	unsigned long flags;
-	spin_lock_irqsave(&np->lock, flags);
-
-	add_to_tx_ring(np, skb, length);
-	dev->trans_start = jiffies;
-
-	/* If we just used up the very last entry in the
-	 * TX ring on this device, tell the queueing
-	 * layer to send no more.
-	 */
-	if (tx_full(dev))
-		netif_stop_queue(dev);
-
-	/* When the TX completion hw interrupt arrives, this
-	 * is when the transmit statistics are updated.
-	 */
-
-	spin_unlock_irqrestore(&np->lock, flags);
-#else
-	/* This is the case for older hardware which takes
-	 * a single transmit buffer at a time, and it is
-	 * just written to the device via PIO.
-	 *
-	 * No spin locking is needed since there is no TX complete
-	 * event.  If by chance your card does have a TX complete
-	 * hardware IRQ then you may need to utilize np->lock here.
-	 */
-	hardware_send_packet(ioaddr, buf, length);
-	np->stats.tx_bytes += skb->len;
-
-	dev->trans_start = jiffies;
-
-	/* You might need to clean up and record Tx statistics here. */
-	if (inw(ioaddr) == /*RU*/81)
-		np->stats.tx_aborted_errors++;
-	dev_kfree_skb (skb);
-#endif
-
-	return NETDEV_TX_OK;
-}
-
-#if TX_RING
-/* This handles TX complete events posted by the device
- * via interrupts.
- */
-void net_tx(struct net_device *dev)
-{
-	struct net_local *np = netdev_priv(dev);
-	int entry;
-
-	/* This protects us from concurrent execution of
-	 * our dev->hard_start_xmit function above.
-	 */
-	spin_lock(&np->lock);
-
-	entry = np->tx_old;
-	while (tx_entry_is_sent(np, entry)) {
-		struct sk_buff *skb = np->skbs[entry];
-
-		np->stats.tx_bytes += skb->len;
-		dev_kfree_skb_irq (skb);
-
-		entry = next_tx_entry(np, entry);
-	}
-	np->tx_old = entry;
-
-	/* If we had stopped the queue due to a "tx full"
-	 * condition, and space has now been made available,
-	 * wake up the queue.
-	 */
-	if (netif_queue_stopped(dev) && ! tx_full(dev))
-		netif_wake_queue(dev);
-
-	spin_unlock(&np->lock);
-}
-#endif
-
-/*
- * The typical workload of the driver:
- * Handle the network interface interrupts.
- */
-static irqreturn_t net_interrupt(int irq, void *dev_id)
-{
-	struct net_device *dev = dev_id;
-	struct net_local *np;
-	int ioaddr, status;
-	int handled = 0;
-
-	ioaddr = dev->base_addr;
-
-	np = netdev_priv(dev);
-	status = inw(ioaddr + 0);
-
-	if (status == 0)
-		goto out;
-	handled = 1;
-
-	if (status & RX_INTR) {
-		/* Got a packet(s). */
-		net_rx(dev);
-	}
-#if TX_RING
-	if (status & TX_INTR) {
-		/* Transmit complete. */
-		net_tx(dev);
-		np->stats.tx_packets++;
-		netif_wake_queue(dev);
-	}
-#endif
-	if (status & COUNTERS_INTR) {
-		/* Increment the appropriate 'localstats' field. */
-		np->stats.tx_window_errors++;
-	}
-out:
-	return IRQ_RETVAL(handled);
-}
-
-/* We have a good packet(s), get it/them out of the buffers. */
-static void
-net_rx(struct net_device *dev)
-{
-	struct net_local *lp = netdev_priv(dev);
-	int ioaddr = dev->base_addr;
-	int boguscount = 10;
-
-	do {
-		int status = inw(ioaddr);
-		int pkt_len = inw(ioaddr);
-
-		if (pkt_len == 0)		/* Read all the frames? */
-			break;			/* Done for now */
-
-		if (status & 0x40) {	/* There was an error. */
-			lp->stats.rx_errors++;
-			if (status & 0x20) lp->stats.rx_frame_errors++;
-			if (status & 0x10) lp->stats.rx_over_errors++;
-			if (status & 0x08) lp->stats.rx_crc_errors++;
-			if (status & 0x04) lp->stats.rx_fifo_errors++;
-		} else {
-			/* Malloc up new buffer. */
-			struct sk_buff *skb;
-
-			lp->stats.rx_bytes+=pkt_len;
-
-			skb = dev_alloc_skb(pkt_len);
-			if (skb == NULL) {
-				printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n",
-					   dev->name);
-				lp->stats.rx_dropped++;
-				break;
-			}
-			skb->dev = dev;
-
-			/* 'skb->data' points to the start of sk_buff data area. */
-			memcpy(skb_put(skb,pkt_len), (void*)dev->rmem_start,
-				   pkt_len);
-			/* or */
-			insw(ioaddr, skb->data, (pkt_len + 1) >> 1);
-
-			netif_rx(skb);
-			lp->stats.rx_packets++;
-			lp->stats.rx_bytes += pkt_len;
-		}
-	} while (--boguscount);
-
-	return;
-}
-
-/* The inverse routine to net_open(). */
-static int
-net_close(struct net_device *dev)
-{
-	struct net_local *lp = netdev_priv(dev);
-	int ioaddr = dev->base_addr;
-
-	lp->open_time = 0;
-
-	netif_stop_queue(dev);
-
-	/* Flush the Tx and disable Rx here. */
-
-	disable_dma(dev->dma);
-
-	/* If not IRQ or DMA jumpered, free up the line. */
-	outw(0x00, ioaddr+0);	/* Release the physical interrupt line. */
-
-	free_irq(dev->irq, dev);
-	free_dma(dev->dma);
-
-	/* Update the statistics here. */
-
-	return 0;
-
-}
-
-/*
- * Get the current statistics.
- * This may be called with the card open or closed.
- */
-static struct net_device_stats *net_get_stats(struct net_device *dev)
-{
-	struct net_local *lp = netdev_priv(dev);
-	short ioaddr = dev->base_addr;
-
-	/* Update the statistics from the device registers. */
-	lp->stats.rx_missed_errors = inw(ioaddr+1);
-	return &lp->stats;
-}
-
-/*
- * Set or clear the multicast filter for this adaptor.
- * num_addrs == -1	Promiscuous mode, receive all packets
- * num_addrs == 0	Normal mode, clear multicast list
- * num_addrs > 0	Multicast mode, receive normal and MC packets,
- *			and do best-effort filtering.
- */
-static void
-set_multicast_list(struct net_device *dev)
-{
-	short ioaddr = dev->base_addr;
-	if (dev->flags&IFF_PROMISC)
-	{
-		/* Enable promiscuous mode */
-		outw(MULTICAST|PROMISC, ioaddr);
-	}
-	else if((dev->flags&IFF_ALLMULTI) || dev->mc_count > HW_MAX_ADDRS)
-	{
-		/* Disable promiscuous mode, use normal mode. */
-		hardware_set_filter(NULL);
-
-		outw(MULTICAST, ioaddr);
-	}
-	else if(dev->mc_count)
-	{
-		/* Walk the address list, and load the filter */
-		hardware_set_filter(dev->mc_list);
-
-		outw(MULTICAST, ioaddr);
-	}
-	else
-		outw(0, ioaddr);
-}
-
-#ifdef MODULE
-
-static struct net_device *this_device;
-static int io = 0x300;
-static int irq;
-static int dma;
-static int mem;
-MODULE_LICENSE("GPL");
-
-int init_module(void)
-{
-	struct net_device *dev;
-	int result;
-
-	if (io == 0)
-		printk(KERN_WARNING "%s: You shouldn't use auto-probing with insmod!\n",
-			   cardname);
-	dev = alloc_etherdev(sizeof(struct net_local));
-	if (!dev)
-		return -ENOMEM;
-
-	/* Copy the parameters from insmod into the device structure. */
-	dev->base_addr = io;
-	dev->irq       = irq;
-	dev->dma       = dma;
-	dev->mem_start = mem;
-	if (do_netcard_probe(dev) == 0) {
-		this_device = dev;
-		return 0;
-	}
-	free_netdev(dev);
-	return -ENXIO;
-}
-
-void
-cleanup_module(void)
-{
-	unregister_netdev(this_device);
-	cleanup_card(this_device);
-	free_netdev(this_device);
-}
-
-#endif /* MODULE */