diff options
| author | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2011-04-07 16:42:33 +0200 |
|---|---|---|
| committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2011-08-11 05:03:27 +0200 |
| commit | dee1ad47f2ee75f5146d83ca757c1b7861c34c3b (patch) | |
| tree | 47cbdefe3d0f9b729724e378ad6a96eaddfd5fbc /drivers/net/ixgbe/ixgbe_common.c | |
| parent | chelsio: Move the Chelsio drivers (diff) | |
| download | linux-dee1ad47f2ee75f5146d83ca757c1b7861c34c3b.tar.xz linux-dee1ad47f2ee75f5146d83ca757c1b7861c34c3b.zip | |
intel: Move the Intel wired LAN drivers
Moves the Intel wired LAN drivers into drivers/net/ethernet/intel/ and
the necessary Kconfig and Makefile changes.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/ixgbe/ixgbe_common.c')
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_common.c | 3510 |
1 files changed, 0 insertions, 3510 deletions
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c deleted file mode 100644 index fc1375f26fe5..000000000000 --- a/drivers/net/ixgbe/ixgbe_common.c +++ /dev/null @@ -1,3510 +0,0 @@ -/******************************************************************************* - - Intel 10 Gigabit PCI Express Linux driver - Copyright(c) 1999 - 2011 Intel Corporation. - - This program is free software; you can redistribute it and/or modify it - under the terms and conditions of the GNU General Public License, - version 2, as published by the Free Software Foundation. - - This program is distributed in the hope it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - more details. - - You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., - 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - - The full GNU General Public License is included in this distribution in - the file called "COPYING". - - Contact Information: - e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> - Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 - -*******************************************************************************/ - -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/sched.h> -#include <linux/netdevice.h> - -#include "ixgbe.h" -#include "ixgbe_common.h" -#include "ixgbe_phy.h" - -static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw); -static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw); -static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw); -static s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw); -static void ixgbe_standby_eeprom(struct ixgbe_hw *hw); -static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data, - u16 count); -static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count); -static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec); -static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec); -static void ixgbe_release_eeprom(struct ixgbe_hw *hw); - -static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr); -static s32 ixgbe_fc_autoneg_fiber(struct ixgbe_hw *hw); -static s32 ixgbe_fc_autoneg_backplane(struct ixgbe_hw *hw); -static s32 ixgbe_fc_autoneg_copper(struct ixgbe_hw *hw); -static s32 ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw); -static s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg, - u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm); -static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num); -static s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg); -static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, - u16 words, u16 *data); -static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, - u16 words, u16 *data); -static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw, - u16 offset); - -/** - * ixgbe_start_hw_generic - Prepare hardware for Tx/Rx - * @hw: pointer to hardware structure - * - * Starts the hardware by filling the bus info structure and media type, clears - * all on chip counters, initializes receive address registers, multicast - * table, VLAN filter table, calls routine to set up link and flow control - * settings, and leaves transmit and receive units disabled and uninitialized - **/ -s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw) -{ - u32 ctrl_ext; - - /* Set the media type */ - hw->phy.media_type = hw->mac.ops.get_media_type(hw); - - /* Identify the PHY */ - hw->phy.ops.identify(hw); - - /* Clear the VLAN filter table */ - hw->mac.ops.clear_vfta(hw); - - /* Clear statistics registers */ - hw->mac.ops.clear_hw_cntrs(hw); - - /* Set No Snoop Disable */ - ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT); - ctrl_ext |= IXGBE_CTRL_EXT_NS_DIS; - IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext); - IXGBE_WRITE_FLUSH(hw); - - /* Setup flow control */ - ixgbe_setup_fc(hw, 0); - - /* Clear adapter stopped flag */ - hw->adapter_stopped = false; - - return 0; -} - -/** - * ixgbe_start_hw_gen2 - Init sequence for common device family - * @hw: pointer to hw structure - * - * Performs the init sequence common to the second generation - * of 10 GbE devices. - * Devices in the second generation: - * 82599 - * X540 - **/ -s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw) -{ - u32 i; - u32 regval; - - /* Clear the rate limiters */ - for (i = 0; i < hw->mac.max_tx_queues; i++) { - IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, i); - IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, 0); - } - IXGBE_WRITE_FLUSH(hw); - - /* Disable relaxed ordering */ - for (i = 0; i < hw->mac.max_tx_queues; i++) { - regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(i)); - regval &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN; - IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(i), regval); - } - - for (i = 0; i < hw->mac.max_rx_queues; i++) { - regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i)); - regval &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN | - IXGBE_DCA_RXCTRL_DESC_HSRO_EN); - IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval); - } - - return 0; -} - -/** - * ixgbe_init_hw_generic - Generic hardware initialization - * @hw: pointer to hardware structure - * - * Initialize the hardware by resetting the hardware, filling the bus info - * structure and media type, clears all on chip counters, initializes receive - * address registers, multicast table, VLAN filter table, calls routine to set - * up link and flow control settings, and leaves transmit and receive units - * disabled and uninitialized - **/ -s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw) -{ - s32 status; - - /* Reset the hardware */ - status = hw->mac.ops.reset_hw(hw); - - if (status == 0) { - /* Start the HW */ - status = hw->mac.ops.start_hw(hw); - } - - return status; -} - -/** - * ixgbe_clear_hw_cntrs_generic - Generic clear hardware counters - * @hw: pointer to hardware structure - * - * Clears all hardware statistics counters by reading them from the hardware - * Statistics counters are clear on read. - **/ -s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw) -{ - u16 i = 0; - - IXGBE_READ_REG(hw, IXGBE_CRCERRS); - IXGBE_READ_REG(hw, IXGBE_ILLERRC); - IXGBE_READ_REG(hw, IXGBE_ERRBC); - IXGBE_READ_REG(hw, IXGBE_MSPDC); - for (i = 0; i < 8; i++) - IXGBE_READ_REG(hw, IXGBE_MPC(i)); - - IXGBE_READ_REG(hw, IXGBE_MLFC); - IXGBE_READ_REG(hw, IXGBE_MRFC); - IXGBE_READ_REG(hw, IXGBE_RLEC); - IXGBE_READ_REG(hw, IXGBE_LXONTXC); - IXGBE_READ_REG(hw, IXGBE_LXOFFTXC); - if (hw->mac.type >= ixgbe_mac_82599EB) { - IXGBE_READ_REG(hw, IXGBE_LXONRXCNT); - IXGBE_READ_REG(hw, IXGBE_LXOFFRXCNT); - } else { - IXGBE_READ_REG(hw, IXGBE_LXONRXC); - IXGBE_READ_REG(hw, IXGBE_LXOFFRXC); - } - - for (i = 0; i < 8; i++) { - IXGBE_READ_REG(hw, IXGBE_PXONTXC(i)); - IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(i)); - if (hw->mac.type >= ixgbe_mac_82599EB) { - IXGBE_READ_REG(hw, IXGBE_PXONRXCNT(i)); - IXGBE_READ_REG(hw, IXGBE_PXOFFRXCNT(i)); - } else { - IXGBE_READ_REG(hw, IXGBE_PXONRXC(i)); - IXGBE_READ_REG(hw, IXGBE_PXOFFRXC(i)); - } - } - if (hw->mac.type >= ixgbe_mac_82599EB) - for (i = 0; i < 8; i++) - IXGBE_READ_REG(hw, IXGBE_PXON2OFFCNT(i)); - IXGBE_READ_REG(hw, IXGBE_PRC64); - IXGBE_READ_REG(hw, IXGBE_PRC127); - IXGBE_READ_REG(hw, IXGBE_PRC255); - IXGBE_READ_REG(hw, IXGBE_PRC511); - IXGBE_READ_REG(hw, IXGBE_PRC1023); - IXGBE_READ_REG(hw, IXGBE_PRC1522); - IXGBE_READ_REG(hw, IXGBE_GPRC); - IXGBE_READ_REG(hw, IXGBE_BPRC); - IXGBE_READ_REG(hw, IXGBE_MPRC); - IXGBE_READ_REG(hw, IXGBE_GPTC); - IXGBE_READ_REG(hw, IXGBE_GORCL); - IXGBE_READ_REG(hw, IXGBE_GORCH); - IXGBE_READ_REG(hw, IXGBE_GOTCL); - IXGBE_READ_REG(hw, IXGBE_GOTCH); - for (i = 0; i < 8; i++) - IXGBE_READ_REG(hw, IXGBE_RNBC(i)); - IXGBE_READ_REG(hw, IXGBE_RUC); - IXGBE_READ_REG(hw, IXGBE_RFC); - IXGBE_READ_REG(hw, IXGBE_ROC); - IXGBE_READ_REG(hw, IXGBE_RJC); - IXGBE_READ_REG(hw, IXGBE_MNGPRC); - IXGBE_READ_REG(hw, IXGBE_MNGPDC); - IXGBE_READ_REG(hw, IXGBE_MNGPTC); - IXGBE_READ_REG(hw, IXGBE_TORL); - IXGBE_READ_REG(hw, IXGBE_TORH); - IXGBE_READ_REG(hw, IXGBE_TPR); - IXGBE_READ_REG(hw, IXGBE_TPT); - IXGBE_READ_REG(hw, IXGBE_PTC64); - IXGBE_READ_REG(hw, IXGBE_PTC127); - IXGBE_READ_REG(hw, IXGBE_PTC255); - IXGBE_READ_REG(hw, IXGBE_PTC511); - IXGBE_READ_REG(hw, IXGBE_PTC1023); - IXGBE_READ_REG(hw, IXGBE_PTC1522); - IXGBE_READ_REG(hw, IXGBE_MPTC); - IXGBE_READ_REG(hw, IXGBE_BPTC); - for (i = 0; i < 16; i++) { - IXGBE_READ_REG(hw, IXGBE_QPRC(i)); - IXGBE_READ_REG(hw, IXGBE_QPTC(i)); - if (hw->mac.type >= ixgbe_mac_82599EB) { - IXGBE_READ_REG(hw, IXGBE_QBRC_L(i)); - IXGBE_READ_REG(hw, IXGBE_QBRC_H(i)); - IXGBE_READ_REG(hw, IXGBE_QBTC_L(i)); - IXGBE_READ_REG(hw, IXGBE_QBTC_H(i)); - IXGBE_READ_REG(hw, IXGBE_QPRDC(i)); - } else { - IXGBE_READ_REG(hw, IXGBE_QBRC(i)); - IXGBE_READ_REG(hw, IXGBE_QBTC(i)); - } - } - - if (hw->mac.type == ixgbe_mac_X540) { - if (hw->phy.id == 0) - hw->phy.ops.identify(hw); - hw->phy.ops.read_reg(hw, 0x3, IXGBE_PCRC8ECL, &i); - hw->phy.ops.read_reg(hw, 0x3, IXGBE_PCRC8ECH, &i); - hw->phy.ops.read_reg(hw, 0x3, IXGBE_LDPCECL, &i); - hw->phy.ops.read_reg(hw, 0x3, IXGBE_LDPCECH, &i); - } - - return 0; -} - -/** - * ixgbe_read_pba_string_generic - Reads part number string from EEPROM - * @hw: pointer to hardware structure - * @pba_num: stores the part number string from the EEPROM - * @pba_num_size: part number string buffer length - * - * Reads the part number string from the EEPROM. - **/ -s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num, - u32 pba_num_size) -{ - s32 ret_val; - u16 data; - u16 pba_ptr; - u16 offset; - u16 length; - - if (pba_num == NULL) { - hw_dbg(hw, "PBA string buffer was null\n"); - return IXGBE_ERR_INVALID_ARGUMENT; - } - - ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM0_PTR, &data); - if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); - return ret_val; - } - - ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM1_PTR, &pba_ptr); - if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); - return ret_val; - } - - /* - * if data is not ptr guard the PBA must be in legacy format which - * means pba_ptr is actually our second data word for the PBA number - * and we can decode it into an ascii string - */ - if (data != IXGBE_PBANUM_PTR_GUARD) { - hw_dbg(hw, "NVM PBA number is not stored as string\n"); - - /* we will need 11 characters to store the PBA */ - if (pba_num_size < 11) { - hw_dbg(hw, "PBA string buffer too small\n"); - return IXGBE_ERR_NO_SPACE; - } - - /* extract hex string from data and pba_ptr */ - pba_num[0] = (data >> 12) & 0xF; - pba_num[1] = (data >> 8) & 0xF; - pba_num[2] = (data >> 4) & 0xF; - pba_num[3] = data & 0xF; - pba_num[4] = (pba_ptr >> 12) & 0xF; - pba_num[5] = (pba_ptr >> 8) & 0xF; - pba_num[6] = '-'; - pba_num[7] = 0; - pba_num[8] = (pba_ptr >> 4) & 0xF; - pba_num[9] = pba_ptr & 0xF; - - /* put a null character on the end of our string */ - pba_num[10] = '\0'; - - /* switch all the data but the '-' to hex char */ - for (offset = 0; offset < 10; offset++) { - if (pba_num[offset] < 0xA) - pba_num[offset] += '0'; - else if (pba_num[offset] < 0x10) - pba_num[offset] += 'A' - 0xA; - } - - return 0; - } - - ret_val = hw->eeprom.ops.read(hw, pba_ptr, &length); - if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); - return ret_val; - } - - if (length == 0xFFFF || length == 0) { - hw_dbg(hw, "NVM PBA number section invalid length\n"); - return IXGBE_ERR_PBA_SECTION; - } - - /* check if pba_num buffer is big enough */ - if (pba_num_size < (((u32)length * 2) - 1)) { - hw_dbg(hw, "PBA string buffer too small\n"); - return IXGBE_ERR_NO_SPACE; - } - - /* trim pba length from start of string */ - pba_ptr++; - length--; - - for (offset = 0; offset < length; offset++) { - ret_val = hw->eeprom.ops.read(hw, pba_ptr + offset, &data); - if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); - return ret_val; - } - pba_num[offset * 2] = (u8)(data >> 8); - pba_num[(offset * 2) + 1] = (u8)(data & 0xFF); - } - pba_num[offset * 2] = '\0'; - - return 0; -} - -/** - * ixgbe_get_mac_addr_generic - Generic get MAC address - * @hw: pointer to hardware structure - * @mac_addr: Adapter MAC address - * - * Reads the adapter's MAC address from first Receive Address Register (RAR0) - * A reset of the adapter must be performed prior to calling this function - * in order for the MAC address to have been loaded from the EEPROM into RAR0 - **/ -s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr) -{ - u32 rar_high; - u32 rar_low; - u16 i; - - rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(0)); - rar_low = IXGBE_READ_REG(hw, IXGBE_RAL(0)); - - for (i = 0; i < 4; i++) - mac_addr[i] = (u8)(rar_low >> (i*8)); - - for (i = 0; i < 2; i++) - mac_addr[i+4] = (u8)(rar_high >> (i*8)); - - return 0; -} - -/** - * ixgbe_get_bus_info_generic - Generic set PCI bus info - * @hw: pointer to hardware structure - * - * Sets the PCI bus info (speed, width, type) within the ixgbe_hw structure - **/ -s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw) -{ - struct ixgbe_adapter *adapter = hw->back; - struct ixgbe_mac_info *mac = &hw->mac; - u16 link_status; - - hw->bus.type = ixgbe_bus_type_pci_express; - - /* Get the negotiated link width and speed from PCI config space */ - pci_read_config_word(adapter->pdev, IXGBE_PCI_LINK_STATUS, - &link_status); - - switch (link_status & IXGBE_PCI_LINK_WIDTH) { - case IXGBE_PCI_LINK_WIDTH_1: - hw->bus.width = ixgbe_bus_width_pcie_x1; - break; - case IXGBE_PCI_LINK_WIDTH_2: - hw->bus.width = ixgbe_bus_width_pcie_x2; - break; - case IXGBE_PCI_LINK_WIDTH_4: - hw->bus.width = ixgbe_bus_width_pcie_x4; - break; - case IXGBE_PCI_LINK_WIDTH_8: - hw->bus.width = ixgbe_bus_width_pcie_x8; - break; - default: - hw->bus.width = ixgbe_bus_width_unknown; - break; - } - - switch (link_status & IXGBE_PCI_LINK_SPEED) { - case IXGBE_PCI_LINK_SPEED_2500: - hw->bus.speed = ixgbe_bus_speed_2500; - break; - case IXGBE_PCI_LINK_SPEED_5000: - hw->bus.speed = ixgbe_bus_speed_5000; - break; - default: - hw->bus.speed = ixgbe_bus_speed_unknown; - break; - } - - mac->ops.set_lan_id(hw); - - return 0; -} - -/** - * ixgbe_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices - * @hw: pointer to the HW structure - * - * Determines the LAN function id by reading memory-mapped registers - * and swaps the port value if requested. - **/ -void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw) -{ - struct ixgbe_bus_info *bus = &hw->bus; - u32 reg; - - reg = IXGBE_READ_REG(hw, IXGBE_STATUS); - bus->func = (reg & IXGBE_STATUS_LAN_ID) >> IXGBE_STATUS_LAN_ID_SHIFT; - bus->lan_id = bus->func; - - /* check for a port swap */ - reg = IXGBE_READ_REG(hw, IXGBE_FACTPS); - if (reg & IXGBE_FACTPS_LFS) - bus->func ^= 0x1; -} - -/** - * ixgbe_stop_adapter_generic - Generic stop Tx/Rx units - * @hw: pointer to hardware structure - * - * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts, - * disables transmit and receive units. The adapter_stopped flag is used by - * the shared code and drivers to determine if the adapter is in a stopped - * state and should not touch the hardware. - **/ -s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw) -{ - u32 number_of_queues; - u32 reg_val; - u16 i; - - /* - * Set the adapter_stopped flag so other driver functions stop touching - * the hardware - */ - hw->adapter_stopped = true; - - /* Disable the receive unit */ - reg_val = IXGBE_READ_REG(hw, IXGBE_RXCTRL); - reg_val &= ~(IXGBE_RXCTRL_RXEN); - IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, reg_val); - IXGBE_WRITE_FLUSH(hw); - usleep_range(2000, 4000); - - /* Clear interrupt mask to stop from interrupts being generated */ - IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_IRQ_CLEAR_MASK); - - /* Clear any pending interrupts */ - IXGBE_READ_REG(hw, IXGBE_EICR); - - /* Disable the transmit unit. Each queue must be disabled. */ - number_of_queues = hw->mac.max_tx_queues; - for (i = 0; i < number_of_queues; i++) { - reg_val = IXGBE_READ_REG(hw, IXGBE_TXDCTL(i)); - if (reg_val & IXGBE_TXDCTL_ENABLE) { - reg_val &= ~IXGBE_TXDCTL_ENABLE; - IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(i), reg_val); - } - } - - /* - * Prevent the PCI-E bus from from hanging by disabling PCI-E master - * access and verify no pending requests - */ - ixgbe_disable_pcie_master(hw); - - return 0; -} - -/** - * ixgbe_led_on_generic - Turns on the software controllable LEDs. - * @hw: pointer to hardware structure - * @index: led number to turn on - **/ -s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index) -{ - u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); - - /* To turn on the LED, set mode to ON. */ - led_reg &= ~IXGBE_LED_MODE_MASK(index); - led_reg |= IXGBE_LED_ON << IXGBE_LED_MODE_SHIFT(index); - IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); - IXGBE_WRITE_FLUSH(hw); - - return 0; -} - -/** - * ixgbe_led_off_generic - Turns off the software controllable LEDs. - * @hw: pointer to hardware structure - * @index: led number to turn off - **/ -s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index) -{ - u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); - - /* To turn off the LED, set mode to OFF. */ - led_reg &= ~IXGBE_LED_MODE_MASK(index); - led_reg |= IXGBE_LED_OFF << IXGBE_LED_MODE_SHIFT(index); - IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); - IXGBE_WRITE_FLUSH(hw); - - return 0; -} - -/** - * ixgbe_init_eeprom_params_generic - Initialize EEPROM params - * @hw: pointer to hardware structure - * - * Initializes the EEPROM parameters ixgbe_eeprom_info within the - * ixgbe_hw struct in order to set up EEPROM access. - **/ -s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw) -{ - struct ixgbe_eeprom_info *eeprom = &hw->eeprom; - u32 eec; - u16 eeprom_size; - - if (eeprom->type == ixgbe_eeprom_uninitialized) { - eeprom->type = ixgbe_eeprom_none; - /* Set default semaphore delay to 10ms which is a well - * tested value */ - eeprom->semaphore_delay = 10; - /* Clear EEPROM page size, it will be initialized as needed */ - eeprom->word_page_size = 0; - - /* - * Check for EEPROM present first. - * If not present leave as none - */ - eec = IXGBE_READ_REG(hw, IXGBE_EEC); - if (eec & IXGBE_EEC_PRES) { - eeprom->type = ixgbe_eeprom_spi; - - /* - * SPI EEPROM is assumed here. This code would need to - * change if a future EEPROM is not SPI. - */ - eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >> - IXGBE_EEC_SIZE_SHIFT); - eeprom->word_size = 1 << (eeprom_size + - IXGBE_EEPROM_WORD_SIZE_SHIFT); - } - - if (eec & IXGBE_EEC_ADDR_SIZE) - eeprom->address_bits = 16; - else - eeprom->address_bits = 8; - hw_dbg(hw, "Eeprom params: type = %d, size = %d, address bits: " - "%d\n", eeprom->type, eeprom->word_size, - eeprom->address_bits); - } - - return 0; -} - -/** - * ixgbe_write_eeprom_buffer_bit_bang_generic - Write EEPROM using bit-bang - * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to write - * @words: number of words - * @data: 16 bit word(s) to write to EEPROM - * - * Reads 16 bit word(s) from EEPROM through bit-bang method - **/ -s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, - u16 words, u16 *data) -{ - s32 status = 0; - u16 i, count; - - hw->eeprom.ops.init_params(hw); - - if (words == 0) { - status = IXGBE_ERR_INVALID_ARGUMENT; - goto out; - } - - if (offset + words > hw->eeprom.word_size) { - status = IXGBE_ERR_EEPROM; - goto out; - } - - /* - * The EEPROM page size cannot be queried from the chip. We do lazy - * initialization. It is worth to do that when we write large buffer. - */ - if ((hw->eeprom.word_page_size == 0) && - (words > IXGBE_EEPROM_PAGE_SIZE_MAX)) - ixgbe_detect_eeprom_page_size_generic(hw, offset); - - /* - * We cannot hold synchronization semaphores for too long - * to avoid other entity starvation. However it is more efficient - * to read in bursts than synchronizing access for each word. - */ - for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) { - count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ? - IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i); - status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset + i, - count, &data[i]); - - if (status != 0) - break; - } - -out: - return status; -} - -/** - * ixgbe_write_eeprom_buffer_bit_bang - Writes 16 bit word(s) to EEPROM - * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to be written to - * @words: number of word(s) - * @data: 16 bit word(s) to be written to the EEPROM - * - * If ixgbe_eeprom_update_checksum is not called after this function, the - * EEPROM will most likely contain an invalid checksum. - **/ -static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, - u16 words, u16 *data) -{ - s32 status; - u16 word; - u16 page_size; - u16 i; - u8 write_opcode = IXGBE_EEPROM_WRITE_OPCODE_SPI; - - /* Prepare the EEPROM for writing */ - status = ixgbe_acquire_eeprom(hw); - - if (status == 0) { - if (ixgbe_ready_eeprom(hw) != 0) { - ixgbe_release_eeprom(hw); - status = IXGBE_ERR_EEPROM; - } - } - - if (status == 0) { - for (i = 0; i < words; i++) { - ixgbe_standby_eeprom(hw); - - /* Send the WRITE ENABLE command (8 bit opcode ) */ - ixgbe_shift_out_eeprom_bits(hw, - IXGBE_EEPROM_WREN_OPCODE_SPI, - IXGBE_EEPROM_OPCODE_BITS); - - ixgbe_standby_eeprom(hw); - - /* - * Some SPI eeproms use the 8th address bit embedded - * in the opcode - */ - if ((hw->eeprom.address_bits == 8) && - ((offset + i) >= 128)) - write_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI; - - /* Send the Write command (8-bit opcode + addr) */ - ixgbe_shift_out_eeprom_bits(hw, write_opcode, - IXGBE_EEPROM_OPCODE_BITS); - ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2), - hw->eeprom.address_bits); - - page_size = hw->eeprom.word_page_size; - - /* Send the data in burst via SPI*/ - do { - word = data[i]; - word = (word >> 8) | (word << 8); - ixgbe_shift_out_eeprom_bits(hw, word, 16); - - if (page_size == 0) - break; - - /* do not wrap around page */ - if (((offset + i) & (page_size - 1)) == - (page_size - 1)) - break; - } while (++i < words); - - ixgbe_standby_eeprom(hw); - usleep_range(10000, 20000); - } - /* Done with writing - release the EEPROM */ - ixgbe_release_eeprom(hw); - } - - return status; -} - -/** - * ixgbe_write_eeprom_generic - Writes 16 bit value to EEPROM - * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to be written to - * @data: 16 bit word to be written to the EEPROM - * - * If ixgbe_eeprom_update_checksum is not called after this function, the - * EEPROM will most likely contain an invalid checksum. - **/ -s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data) -{ - s32 status; - - hw->eeprom.ops.init_params(hw); - - if (offset >= hw->eeprom.word_size) { - status = IXGBE_ERR_EEPROM; - goto out; - } - - status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset, 1, &data); - -out: - return status; -} - -/** - * ixgbe_read_eeprom_buffer_bit_bang_generic - Read EEPROM using bit-bang - * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to be read - * @words: number of word(s) - * @data: read 16 bit words(s) from EEPROM - * - * Reads 16 bit word(s) from EEPROM through bit-bang method - **/ -s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, - u16 words, u16 *data) -{ - s32 status = 0; - u16 i, count; - - hw->eeprom.ops.init_params(hw); - - if (words == 0) { - status = IXGBE_ERR_INVALID_ARGUMENT; - goto out; - } - - if (offset + words > hw->eeprom.word_size) { - status = IXGBE_ERR_EEPROM; - goto out; - } - - /* - * We cannot hold synchronization semaphores for too long - * to avoid other entity starvation. However it is more efficient - * to read in bursts than synchronizing access for each word. - */ - for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) { - count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ? - IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i); - - status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset + i, - count, &data[i]); - - if (status != 0) - break; - } - -out: - return status; -} - -/** - * ixgbe_read_eeprom_buffer_bit_bang - Read EEPROM using bit-bang - * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to be read - * @words: number of word(s) - * @data: read 16 bit word(s) from EEPROM - * - * Reads 16 bit word(s) from EEPROM through bit-bang method - **/ -static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, - u16 words, u16 *data) -{ - s32 status; - u16 word_in; - u8 read_opcode = IXGBE_EEPROM_READ_OPCODE_SPI; - u16 i; - - /* Prepare the EEPROM for reading */ - status = ixgbe_acquire_eeprom(hw); - - if (status == 0) { - if (ixgbe_ready_eeprom(hw) != 0) { - ixgbe_release_eeprom(hw); - status = IXGBE_ERR_EEPROM; - } - } - - if (status == 0) { - for (i = 0; i < words; i++) { - ixgbe_standby_eeprom(hw); - /* - * Some SPI eeproms use the 8th address bit embedded - * in the opcode - */ - if ((hw->eeprom.address_bits == 8) && - ((offset + i) >= 128)) - read_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI; - - /* Send the READ command (opcode + addr) */ - ixgbe_shift_out_eeprom_bits(hw, read_opcode, - IXGBE_EEPROM_OPCODE_BITS); - ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2), - hw->eeprom.address_bits); - - /* Read the data. */ - word_in = ixgbe_shift_in_eeprom_bits(hw, 16); - data[i] = (word_in >> 8) | (word_in << 8); - } - - /* End this read operation */ - ixgbe_release_eeprom(hw); - } - - return status; -} - -/** - * ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang - * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to be read - * @data: read 16 bit value from EEPROM - * - * Reads 16 bit value from EEPROM through bit-bang method - **/ -s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, - u16 *data) -{ - s32 status; - - hw->eeprom.ops.init_params(hw); - - if (offset >= hw->eeprom.word_size) { - status = IXGBE_ERR_EEPROM; - goto out; - } - - status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data); - -out: - return status; -} - -/** - * ixgbe_read_eerd_buffer_generic - Read EEPROM word(s) using EERD - * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to read - * @words: number of word(s) - * @data: 16 bit word(s) from the EEPROM - * - * Reads a 16 bit word(s) from the EEPROM using the EERD register. - **/ -s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset, - u16 words, u16 *data) -{ - u32 eerd; - s32 status = 0; - u32 i; - - hw->eeprom.ops.init_params(hw); - - if (words == 0) { - status = IXGBE_ERR_INVALID_ARGUMENT; - goto out; - } - - if (offset >= hw->eeprom.word_size) { - status = IXGBE_ERR_EEPROM; - goto out; - } - - for (i = 0; i < words; i++) { - eerd = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) + - IXGBE_EEPROM_RW_REG_START; - - IXGBE_WRITE_REG(hw, IXGBE_EERD, eerd); - status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_READ); - - if (status == 0) { - data[i] = (IXGBE_READ_REG(hw, IXGBE_EERD) >> - IXGBE_EEPROM_RW_REG_DATA); - } else { - hw_dbg(hw, "Eeprom read timed out\n"); - goto out; - } - } -out: - return status; -} - -/** - * ixgbe_detect_eeprom_page_size_generic - Detect EEPROM page size - * @hw: pointer to hardware structure - * @offset: offset within the EEPROM to be used as a scratch pad - * - * Discover EEPROM page size by writing marching data at given offset. - * This function is called only when we are writing a new large buffer - * at given offset so the data would be overwritten anyway. - **/ -static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw, - u16 offset) -{ - u16 data[IXGBE_EEPROM_PAGE_SIZE_MAX]; - s32 status = 0; - u16 i; - - for (i = 0; i < IXGBE_EEPROM_PAGE_SIZE_MAX; i++) - data[i] = i; - - hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX; - status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset, - IXGBE_EEPROM_PAGE_SIZE_MAX, data); - hw->eeprom.word_page_size = 0; - if (status != 0) - goto out; - - status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data); - if (status != 0) - goto out; - - /* - * When writing in burst more than the actual page size - * EEPROM address wraps around current page. - */ - hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX - data[0]; - - hw_dbg(hw, "Detected EEPROM page size = %d words.", - hw->eeprom.word_page_size); -out: - return status; -} - -/** - * ixgbe_read_eerd_generic - Read EEPROM word using EERD - * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to read - * @data: word read from the EEPROM - * - * Reads a 16 bit word from the EEPROM using the EERD register. - **/ -s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data) -{ - return ixgbe_read_eerd_buffer_generic(hw, offset, 1, data); -} - -/** - * ixgbe_write_eewr_buffer_generic - Write EEPROM word(s) using EEWR - * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to write - * @words: number of words - * @data: word(s) write to the EEPROM - * - * Write a 16 bit word(s) to the EEPROM using the EEWR register. - **/ -s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset, - u16 words, u16 *data) -{ - u32 eewr; - s32 status = 0; - u16 i; - - hw->eeprom.ops.init_params(hw); - - if (words == 0) { - status = IXGBE_ERR_INVALID_ARGUMENT; - goto out; - } - - if (offset >= hw->eeprom.word_size) { - status = IXGBE_ERR_EEPROM; - goto out; - } - - for (i = 0; i < words; i++) { - eewr = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) | - (data[i] << IXGBE_EEPROM_RW_REG_DATA) | - IXGBE_EEPROM_RW_REG_START; - - status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE); - if (status != 0) { - hw_dbg(hw, "Eeprom write EEWR timed out\n"); - goto out; - } - - IXGBE_WRITE_REG(hw, IXGBE_EEWR, eewr); - - status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE); - if (status != 0) { - hw_dbg(hw, "Eeprom write EEWR timed out\n"); - goto out; - } - } - -out: - return status; -} - -/** - * ixgbe_write_eewr_generic - Write EEPROM word using EEWR - * @hw: pointer to hardware structure - * @offset: offset of word in the EEPROM to write - * @data: word write to the EEPROM - * - * Write a 16 bit word to the EEPROM using the EEWR register. - **/ -s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data) -{ - return ixgbe_write_eewr_buffer_generic(hw, offset, 1, &data); -} - -/** - * ixgbe_poll_eerd_eewr_done - Poll EERD read or EEWR write status - * @hw: pointer to hardware structure - * @ee_reg: EEPROM flag for polling - * - * Polls the status bit (bit 1) of the EERD or EEWR to determine when the - * read or write is done respectively. - **/ -static s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg) -{ - u32 i; - u32 reg; - s32 status = IXGBE_ERR_EEPROM; - - for (i = 0; i < IXGBE_EERD_EEWR_ATTEMPTS; i++) { - if (ee_reg == IXGBE_NVM_POLL_READ) - reg = IXGBE_READ_REG(hw, IXGBE_EERD); - else - reg = IXGBE_READ_REG(hw, IXGBE_EEWR); - - if (reg & IXGBE_EEPROM_RW_REG_DONE) { - status = 0; - break; - } - udelay(5); - } - return status; -} - -/** - * ixgbe_acquire_eeprom - Acquire EEPROM using bit-bang - * @hw: pointer to hardware structure - * - * Prepares EEPROM for access using bit-bang method. This function should - * be called before issuing a command to the EEPROM. - **/ -static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw) -{ - s32 status = 0; - u32 eec; - u32 i; - - if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) != 0) - status = IXGBE_ERR_SWFW_SYNC; - - if (status == 0) { - eec = IXGBE_READ_REG(hw, IXGBE_EEC); - - /* Request EEPROM Access */ - eec |= IXGBE_EEC_REQ; - IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); - - for (i = 0; i < IXGBE_EEPROM_GRANT_ATTEMPTS; i++) { - eec = IXGBE_READ_REG(hw, IXGBE_EEC); - if (eec & IXGBE_EEC_GNT) - break; - udelay(5); - } - - /* Release if grant not acquired */ - if (!(eec & IXGBE_EEC_GNT)) { - eec &= ~IXGBE_EEC_REQ; - IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); - hw_dbg(hw, "Could not acquire EEPROM grant\n"); - - hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); - status = IXGBE_ERR_EEPROM; - } - - /* Setup EEPROM for Read/Write */ - if (status == 0) { - /* Clear CS and SK */ - eec &= ~(IXGBE_EEC_CS | IXGBE_EEC_SK); - IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); - IXGBE_WRITE_FLUSH(hw); - udelay(1); - } - } - return status; -} - -/** - * ixgbe_get_eeprom_semaphore - Get hardware semaphore - * @hw: pointer to hardware structure - * - * Sets the hardware semaphores so EEPROM access can occur for bit-bang method - **/ -static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw) -{ - s32 status = IXGBE_ERR_EEPROM; - u32 timeout = 2000; - u32 i; - u32 swsm; - - /* Get SMBI software semaphore between device drivers first */ - for (i = 0; i < timeout; i++) { - /* - * If the SMBI bit is 0 when we read it, then the bit will be - * set and we have the semaphore - */ - swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); - if (!(swsm & IXGBE_SWSM_SMBI)) { - status = 0; - break; - } - udelay(50); - } - - if (i == timeout) { - hw_dbg(hw, "Driver can't access the Eeprom - SMBI Semaphore " - "not granted.\n"); - /* - * this release is particularly important because our attempts - * above to get the semaphore may have succeeded, and if there - * was a timeout, we should unconditionally clear the semaphore - * bits to free the driver to make progress - */ - ixgbe_release_eeprom_semaphore(hw); - - udelay(50); - /* - * one last try - * If the SMBI bit is 0 when we read it, then the bit will be - * set and we have the semaphore - */ - swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); - if (!(swsm & IXGBE_SWSM_SMBI)) - status = 0; - } - - /* Now get the semaphore between SW/FW through the SWESMBI bit */ - if (status == 0) { - for (i = 0; i < timeout; i++) { - swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); - - /* Set the SW EEPROM semaphore bit to request access */ - swsm |= IXGBE_SWSM_SWESMBI; - IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm); - - /* - * If we set the bit successfully then we got the - * semaphore. - */ - swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); - if (swsm & IXGBE_SWSM_SWESMBI) - break; - - udelay(50); - } - - /* - * Release semaphores and return error if SW EEPROM semaphore - * was not granted because we don't have access to the EEPROM - */ - if (i >= timeout) { - hw_dbg(hw, "SWESMBI Software EEPROM semaphore " - "not granted.\n"); - ixgbe_release_eeprom_semaphore(hw); - status = IXGBE_ERR_EEPROM; - } - } else { - hw_dbg(hw, "Software semaphore SMBI between device drivers " - "not granted.\n"); - } - - return status; -} - -/** - * ixgbe_release_eeprom_semaphore - Release hardware semaphore - * @hw: pointer to hardware structure - * - * This function clears hardware semaphore bits. - **/ -static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw) -{ - u32 swsm; - - swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); - - /* Release both semaphores by writing 0 to the bits SWESMBI and SMBI */ - swsm &= ~(IXGBE_SWSM_SWESMBI | IXGBE_SWSM_SMBI); - IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm); - IXGBE_WRITE_FLUSH(hw); -} - -/** - * ixgbe_ready_eeprom - Polls for EEPROM ready - * @hw: pointer to hardware structure - **/ -static s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw) -{ - s32 status = 0; - u16 i; - u8 spi_stat_reg; - - /* - * Read "Status Register" repeatedly until the LSB is cleared. The - * EEPROM will signal that the command has been completed by clearing - * bit 0 of the internal status register. If it's not cleared within - * 5 milliseconds, then error out. - */ - for (i = 0; i < IXGBE_EEPROM_MAX_RETRY_SPI; i += 5) { - ixgbe_shift_out_eeprom_bits(hw, IXGBE_EEPROM_RDSR_OPCODE_SPI, - IXGBE_EEPROM_OPCODE_BITS); - spi_stat_reg = (u8)ixgbe_shift_in_eeprom_bits(hw, 8); - if (!(spi_stat_reg & IXGBE_EEPROM_STATUS_RDY_SPI)) - break; - - udelay(5); - ixgbe_standby_eeprom(hw); - } - - /* - * On some parts, SPI write time could vary from 0-20mSec on 3.3V - * devices (and only 0-5mSec on 5V devices) - */ - if (i >= IXGBE_EEPROM_MAX_RETRY_SPI) { - hw_dbg(hw, "SPI EEPROM Status error\n"); - status = IXGBE_ERR_EEPROM; - } - - return status; -} - -/** - * ixgbe_standby_eeprom - Returns EEPROM to a "standby" state - * @hw: pointer to hardware structure - **/ -static void ixgbe_standby_eeprom(struct ixgbe_hw *hw) -{ - u32 eec; - - eec = IXGBE_READ_REG(hw, IXGBE_EEC); - - /* Toggle CS to flush commands */ - eec |= IXGBE_EEC_CS; - IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); - IXGBE_WRITE_FLUSH(hw); - udelay(1); - eec &= ~IXGBE_EEC_CS; - IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); - IXGBE_WRITE_FLUSH(hw); - udelay(1); -} - -/** - * ixgbe_shift_out_eeprom_bits - Shift data bits out to the EEPROM. - * @hw: pointer to hardware structure - * @data: data to send to the EEPROM - * @count: number of bits to shift out - **/ -static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data, - u16 count) -{ - u32 eec; - u32 mask; - u32 i; - - eec = IXGBE_READ_REG(hw, IXGBE_EEC); - - /* - * Mask is used to shift "count" bits of "data" out to the EEPROM - * one bit at a time. Determine the starting bit based on count - */ - mask = 0x01 << (count - 1); - - for (i = 0; i < count; i++) { - /* - * A "1" is shifted out to the EEPROM by setting bit "DI" to a - * "1", and then raising and then lowering the clock (the SK - * bit controls the clock input to the EEPROM). A "0" is - * shifted out to the EEPROM by setting "DI" to "0" and then - * raising and then lowering the clock. - */ - if (data & mask) - eec |= IXGBE_EEC_DI; - else - eec &= ~IXGBE_EEC_DI; - - IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); - IXGBE_WRITE_FLUSH(hw); - - udelay(1); - - ixgbe_raise_eeprom_clk(hw, &eec); - ixgbe_lower_eeprom_clk(hw, &eec); - - /* - * Shift mask to signify next bit of data to shift in to the - * EEPROM - */ - mask = mask >> 1; - } - - /* We leave the "DI" bit set to "0" when we leave this routine. */ - eec &= ~IXGBE_EEC_DI; - IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); - IXGBE_WRITE_FLUSH(hw); -} - -/** - * ixgbe_shift_in_eeprom_bits - Shift data bits in from the EEPROM - * @hw: pointer to hardware structure - **/ -static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count) -{ - u32 eec; - u32 i; - u16 data = 0; - - /* - * In order to read a register from the EEPROM, we need to shift - * 'count' bits in from the EEPROM. Bits are "shifted in" by raising - * the clock input to the EEPROM (setting the SK bit), and then reading - * the value of the "DO" bit. During this "shifting in" process the - * "DI" bit should always be clear. - */ - eec = IXGBE_READ_REG(hw, IXGBE_EEC); - - eec &= ~(IXGBE_EEC_DO | IXGBE_EEC_DI); - - for (i = 0; i < count; i++) { - data = data << 1; - ixgbe_raise_eeprom_clk(hw, &eec); - - eec = IXGBE_READ_REG(hw, IXGBE_EEC); - - eec &= ~(IXGBE_EEC_DI); - if (eec & IXGBE_EEC_DO) - data |= 1; - - ixgbe_lower_eeprom_clk(hw, &eec); - } - - return data; -} - -/** - * ixgbe_raise_eeprom_clk - Raises the EEPROM's clock input. - * @hw: pointer to hardware structure - * @eec: EEC register's current value - **/ -static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec) -{ - /* - * Raise the clock input to the EEPROM - * (setting the SK bit), then delay - */ - *eec = *eec | IXGBE_EEC_SK; - IXGBE_WRITE_REG(hw, IXGBE_EEC, *eec); - IXGBE_WRITE_FLUSH(hw); - udelay(1); -} - -/** - * ixgbe_lower_eeprom_clk - Lowers the EEPROM's clock input. - * @hw: pointer to hardware structure - * @eecd: EECD's current value - **/ -static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec) -{ - /* - * Lower the clock input to the EEPROM (clearing the SK bit), then - * delay - */ - *eec = *eec & ~IXGBE_EEC_SK; - IXGBE_WRITE_REG(hw, IXGBE_EEC, *eec); - IXGBE_WRITE_FLUSH(hw); - udelay(1); -} - -/** - * ixgbe_release_eeprom - Release EEPROM, release semaphores - * @hw: pointer to hardware structure - **/ -static void ixgbe_release_eeprom(struct ixgbe_hw *hw) -{ - u32 eec; - - eec = IXGBE_READ_REG(hw, IXGBE_EEC); - - eec |= IXGBE_EEC_CS; /* Pull CS high */ - eec &= ~IXGBE_EEC_SK; /* Lower SCK */ - - IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); - IXGBE_WRITE_FLUSH(hw); - - udelay(1); - - /* Stop requesting EEPROM access */ - eec &= ~IXGBE_EEC_REQ; - IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); - - hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); - - /* - * Delay before attempt to obtain semaphore again to allow FW - * access. semaphore_delay is in ms we need us for usleep_range - */ - usleep_range(hw->eeprom.semaphore_delay * 1000, - hw->eeprom.semaphore_delay * 2000); -} - -/** - * ixgbe_calc_eeprom_checksum_generic - Calculates and returns the checksum - * @hw: pointer to hardware structure - **/ -u16 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw) -{ - u16 i; - u16 j; - u16 checksum = 0; - u16 length = 0; - u16 pointer = 0; - u16 word = 0; - - /* Include 0x0-0x3F in the checksum */ - for (i = 0; i < IXGBE_EEPROM_CHECKSUM; i++) { - if (hw->eeprom.ops.read(hw, i, &word) != 0) { - hw_dbg(hw, "EEPROM read failed\n"); - break; - } - checksum += word; - } - - /* Include all data from pointers except for the fw pointer */ - for (i = IXGBE_PCIE_ANALOG_PTR; i < IXGBE_FW_PTR; i++) { - hw->eeprom.ops.read(hw, i, &pointer); - - /* Make sure the pointer seems valid */ - if (pointer != 0xFFFF && pointer != 0) { - hw->eeprom.ops.read(hw, pointer, &length); - - if (length != 0xFFFF && length != 0) { - for (j = pointer+1; j <= pointer+length; j++) { - hw->eeprom.ops.read(hw, j, &word); - checksum += word; - } - } - } - } - - checksum = (u16)IXGBE_EEPROM_SUM - checksum; - - return checksum; -} - -/** - * ixgbe_validate_eeprom_checksum_generic - Validate EEPROM checksum - * @hw: pointer to hardware structure - * @checksum_val: calculated checksum - * - * Performs checksum calculation and validates the EEPROM checksum. If the - * caller does not need checksum_val, the value can be NULL. - **/ -s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw, - u16 *checksum_val) -{ - s32 status; - u16 checksum; - u16 read_checksum = 0; - - /* - * Read the first word from the EEPROM. If this times out or fails, do - * not continue or we could be in for a very long wait while every - * EEPROM read fails - */ - status = hw->eeprom.ops.read(hw, 0, &checksum); - - if (status == 0) { - checksum = hw->eeprom.ops.calc_checksum(hw); - - hw->eeprom.ops.read(hw, IXGBE_EEPROM_CHECKSUM, &read_checksum); - - /* - * Verify read checksum from EEPROM is the same as - * calculated checksum - */ - if (read_checksum != checksum) - status = IXGBE_ERR_EEPROM_CHECKSUM; - - /* If the user cares, return the calculated checksum */ - if (checksum_val) - *checksum_val = checksum; - } else { - hw_dbg(hw, "EEPROM read failed\n"); - } - - return status; -} - -/** - * ixgbe_update_eeprom_checksum_generic - Updates the EEPROM checksum - * @hw: pointer to hardware structure - **/ -s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw) -{ - s32 status; - u16 checksum; - - /* - * Read the first word from the EEPROM. If this times out or fails, do - * not continue or we could be in for a very long wait while every - * EEPROM read fails - */ - status = hw->eeprom.ops.read(hw, 0, &checksum); - - if (status == 0) { - checksum = hw->eeprom.ops.calc_checksum(hw); - status = hw->eeprom.ops.write(hw, IXGBE_EEPROM_CHECKSUM, - checksum); - } else { - hw_dbg(hw, "EEPROM read failed\n"); - } - - return status; -} - -/** - * ixgbe_validate_mac_addr - Validate MAC address - * @mac_addr: pointer to MAC address. - * - * Tests a MAC address to ensure it is a valid Individual Address - **/ -s32 ixgbe_validate_mac_addr(u8 *mac_addr) -{ - s32 status = 0; - - /* Make sure it is not a multicast address */ - if (IXGBE_IS_MULTICAST(mac_addr)) - status = IXGBE_ERR_INVALID_MAC_ADDR; - /* Not a broadcast address */ - else if (IXGBE_IS_BROADCAST(mac_addr)) - status = IXGBE_ERR_INVALID_MAC_ADDR; - /* Reject the zero address */ - else if (mac_addr[0] == 0 && mac_addr[1] == 0 && mac_addr[2] == 0 && - mac_addr[3] == 0 && mac_addr[4] == 0 && mac_addr[5] == 0) - status = IXGBE_ERR_INVALID_MAC_ADDR; - - return status; -} - -/** - * ixgbe_set_rar_generic - Set Rx address register - * @hw: pointer to hardware structure - * @index: Receive address register to write - * @addr: Address to put into receive address register - * @vmdq: VMDq "set" or "pool" index - * @enable_addr: set flag that address is active - * - * Puts an ethernet address into a receive address register. - **/ -s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq, - u32 enable_addr) -{ - u32 rar_low, rar_high; - u32 rar_entries = hw->mac.num_rar_entries; - - /* Make sure we are using a valid rar index range */ - if (index >= rar_entries) { - hw_dbg(hw, "RAR index %d is out of range.\n", index); - return IXGBE_ERR_INVALID_ARGUMENT; - } - - /* setup VMDq pool selection before this RAR gets enabled */ - hw->mac.ops.set_vmdq(hw, index, vmdq); - - /* - * HW expects these in little endian so we reverse the byte - * order from network order (big endian) to little endian - */ - rar_low = ((u32)addr[0] | - ((u32)addr[1] << 8) | - ((u32)addr[2] << 16) | - ((u32)addr[3] << 24)); - /* - * Some parts put the VMDq setting in the extra RAH bits, - * so save everything except the lower 16 bits that hold part - * of the address and the address valid bit. - */ - rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index)); - rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV); - rar_high |= ((u32)addr[4] | ((u32)addr[5] << 8)); - - if (enable_addr != 0) - rar_high |= IXGBE_RAH_AV; - - IXGBE_WRITE_REG(hw, IXGBE_RAL(index), rar_low); - IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high); - - return 0; -} - -/** - * ixgbe_clear_rar_generic - Remove Rx address register - * @hw: pointer to hardware structure - * @index: Receive address register to write - * - * Clears an ethernet address from a receive address register. - **/ -s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index) -{ - u32 rar_high; - u32 rar_entries = hw->mac.num_rar_entries; - - /* Make sure we are using a valid rar index range */ - if (index >= rar_entries) { - hw_dbg(hw, "RAR index %d is out of range.\n", index); - return IXGBE_ERR_INVALID_ARGUMENT; - } - - /* - * Some parts put the VMDq setting in the extra RAH bits, - * so save everything except the lower 16 bits that hold part - * of the address and the address valid bit. - */ - rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index)); - rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV); - - IXGBE_WRITE_REG(hw, IXGBE_RAL(index), 0); - IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high); - - /* clear VMDq pool/queue selection for this RAR */ - hw->mac.ops.clear_vmdq(hw, index, IXGBE_CLEAR_VMDQ_ALL); - - return 0; -} - -/** - * ixgbe_init_rx_addrs_generic - Initializes receive address filters. - * @hw: pointer to hardware structure - * - * Places the MAC address in receive address register 0 and clears the rest - * of the receive address registers. Clears the multicast table. Assumes - * the receiver is in reset when the routine is called. - **/ -s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw) -{ - u32 i; - u32 rar_entries = hw->mac.num_rar_entries; - - /* - * If the current mac address is valid, assume it is a software override - * to the permanent address. - * Otherwise, use the permanent address from the eeprom. - */ - if (ixgbe_validate_mac_addr(hw->mac.addr) == - IXGBE_ERR_INVALID_MAC_ADDR) { - /* Get the MAC address from the RAR0 for later reference */ - hw->mac.ops.get_mac_addr(hw, hw->mac.addr); - - hw_dbg(hw, " Keeping Current RAR0 Addr =%pM\n", hw->mac.addr); - } else { - /* Setup the receive address. */ - hw_dbg(hw, "Overriding MAC Address in RAR[0]\n"); - hw_dbg(hw, " New MAC Addr =%pM\n", hw->mac.addr); - - hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV); - - /* clear VMDq pool/queue selection for RAR 0 */ - hw->mac.ops.clear_vmdq(hw, 0, IXGBE_CLEAR_VMDQ_ALL); - } - hw->addr_ctrl.overflow_promisc = 0; - - hw->addr_ctrl.rar_used_count = 1; - - /* Zero out the other receive addresses. */ - hw_dbg(hw, "Clearing RAR[1-%d]\n", rar_entries - 1); - for (i = 1; i < rar_entries; i++) { - IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0); - IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0); - } - - /* Clear the MTA */ - hw->addr_ctrl.mta_in_use = 0; - IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type); - - hw_dbg(hw, " Clearing MTA\n"); - for (i = 0; i < hw->mac.mcft_size; i++) - IXGBE_WRITE_REG(hw, IXGBE_MTA(i), 0); - - if (hw->mac.ops.init_uta_tables) - hw->mac.ops.init_uta_tables(hw); - - return 0; -} - -/** - * ixgbe_mta_vector - Determines bit-vector in multicast table to set - * @hw: pointer to hardware structure - * @mc_addr: the multicast address - * - * Extracts the 12 bits, from a multicast address, to determine which - * bit-vector to set in the multicast table. The hardware uses 12 bits, from - * incoming rx multicast addresses, to determine the bit-vector to check in - * the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set - * by the MO field of the MCSTCTRL. The MO field is set during initialization - * to mc_filter_type. - **/ -static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr) -{ - u32 vector = 0; - - switch (hw->mac.mc_filter_type) { - case 0: /* use bits [47:36] of the address */ - vector = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4)); - break; - case 1: /* use bits [46:35] of the address */ - vector = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5)); - break; - case 2: /* use bits [45:34] of the address */ - vector = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6)); - break; - case 3: /* use bits [43:32] of the address */ - vector = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8)); - break; - default: /* Invalid mc_filter_type */ - hw_dbg(hw, "MC filter type param set incorrectly\n"); - break; - } - - /* vector can only be 12-bits or boundary will be exceeded */ - vector &= 0xFFF; - return vector; -} - -/** - * ixgbe_set_mta - Set bit-vector in multicast table - * @hw: pointer to hardware structure - * @hash_value: Multicast address hash value - * - * Sets the bit-vector in the multicast table. - **/ -static void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr) -{ - u32 vector; - u32 vector_bit; - u32 vector_reg; - - hw->addr_ctrl.mta_in_use++; - - vector = ixgbe_mta_vector(hw, mc_addr); - hw_dbg(hw, " bit-vector = 0x%03X\n", vector); - - /* - * The MTA is a register array of 128 32-bit registers. It is treated - * like an array of 4096 bits. We want to set bit - * BitArray[vector_value]. So we figure out what register the bit is - * in, read it, OR in the new bit, then write back the new value. The - * register is determined by the upper 7 bits of the vector value and - * the bit within that register are determined by the lower 5 bits of - * the value. - */ - vector_reg = (vector >> 5) & 0x7F; - vector_bit = vector & 0x1F; - hw->mac.mta_shadow[vector_reg] |= (1 << vector_bit); -} - -/** - * ixgbe_update_mc_addr_list_generic - Updates MAC list of multicast addresses - * @hw: pointer to hardware structure - * @netdev: pointer to net device structure - * - * The given list replaces any existing list. Clears the MC addrs from receive - * address registers and the multicast table. Uses unused receive address - * registers for the first multicast addresses, and hashes the rest into the - * multicast table. - **/ -s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, - struct net_device *netdev) -{ - struct netdev_hw_addr *ha; - u32 i; - - /* - * Set the new number of MC addresses that we are being requested to - * use. - */ - hw->addr_ctrl.num_mc_addrs = netdev_mc_count(netdev); - hw->addr_ctrl.mta_in_use = 0; - - /* Clear mta_shadow */ - hw_dbg(hw, " Clearing MTA\n"); - memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow)); - - /* Update mta shadow */ - netdev_for_each_mc_addr(ha, netdev) { - hw_dbg(hw, " Adding the multicast addresses:\n"); - ixgbe_set_mta(hw, ha->addr); - } - - /* Enable mta */ - for (i = 0; i < hw->mac.mcft_size; i++) - IXGBE_WRITE_REG_ARRAY(hw, IXGBE_MTA(0), i, - hw->mac.mta_shadow[i]); - - if (hw->addr_ctrl.mta_in_use > 0) - IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, - IXGBE_MCSTCTRL_MFE | hw->mac.mc_filter_type); - - hw_dbg(hw, "ixgbe_update_mc_addr_list_generic Complete\n"); - return 0; -} - -/** - * ixgbe_enable_mc_generic - Enable multicast address in RAR - * @hw: pointer to hardware structure - * - * Enables multicast address in RAR and the use of the multicast hash table. - **/ -s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw) -{ - struct ixgbe_addr_filter_info *a = &hw->addr_ctrl; - - if (a->mta_in_use > 0) - IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, IXGBE_MCSTCTRL_MFE | - hw->mac.mc_filter_type); - - return 0; -} - -/** - * ixgbe_disable_mc_generic - Disable multicast address in RAR - * @hw: pointer to hardware structure - * - * Disables multicast address in RAR and the use of the multicast hash table. - **/ -s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw) -{ - struct ixgbe_addr_filter_info *a = &hw->addr_ctrl; - - if (a->mta_in_use > 0) - IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type); - - return 0; -} - -/** - * ixgbe_fc_enable_generic - Enable flow control - * @hw: pointer to hardware structure - * @packetbuf_num: packet buffer number (0-7) - * - * Enable flow control according to the current settings. - **/ -s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packetbuf_num) -{ - s32 ret_val = 0; - u32 mflcn_reg, fccfg_reg; - u32 reg; - u32 rx_pba_size; - u32 fcrtl, fcrth; - -#ifdef CONFIG_DCB - if (hw->fc.requested_mode == ixgbe_fc_pfc) - goto out; - -#endif /* CONFIG_DCB */ - /* Negotiate the fc mode to use */ - ret_val = ixgbe_fc_autoneg(hw); - if (ret_val == IXGBE_ERR_FLOW_CONTROL) - goto out; - - /* Disable any previous flow control settings */ - mflcn_reg = IXGBE_READ_REG(hw, IXGBE_MFLCN); - mflcn_reg &= ~(IXGBE_MFLCN_RFCE | IXGBE_MFLCN_RPFCE); - - fccfg_reg = IXGBE_READ_REG(hw, IXGBE_FCCFG); - fccfg_reg &= ~(IXGBE_FCCFG_TFCE_802_3X | IXGBE_FCCFG_TFCE_PRIORITY); - - /* - * The possible values of fc.current_mode are: - * 0: Flow control is completely disabled - * 1: Rx flow control is enabled (we can receive pause frames, - * but not send pause frames). - * 2: Tx flow control is enabled (we can send pause frames but - * we do not support receiving pause frames). - * 3: Both Rx and Tx flow control (symmetric) are enabled. -#ifdef CONFIG_DCB - * 4: Priority Flow Control is enabled. -#endif - * other: Invalid. - */ - switch (hw->fc.current_mode) { - case ixgbe_fc_none: - /* - * Flow control is disabled by software override or autoneg. - * The code below will actually disable it in the HW. - */ - break; - case ixgbe_fc_rx_pause: - /* - * Rx Flow control is enabled and Tx Flow control is - * disabled by software override. Since there really - * isn't a way to advertise that we are capable of RX - * Pause ONLY, we will advertise that we support both - * symmetric and asymmetric Rx PAUSE. Later, we will - * disable the adapter's ability to send PAUSE frames. - */ - mflcn_reg |= IXGBE_MFLCN_RFCE; - break; - case ixgbe_fc_tx_pause: - /* - * Tx Flow control is enabled, and Rx Flow control is - * disabled by software override. - */ - fccfg_reg |= IXGBE_FCCFG_TFCE_802_3X; - break; - case ixgbe_fc_full: - /* Flow control (both Rx and Tx) is enabled by SW override. */ - mflcn_reg |= IXGBE_MFLCN_RFCE; - fccfg_reg |= IXGBE_FCCFG_TFCE_802_3X; - break; -#ifdef CONFIG_DCB - case ixgbe_fc_pfc: - goto out; - break; -#endif /* CONFIG_DCB */ - default: - hw_dbg(hw, "Flow control param set incorrectly\n"); - ret_val = IXGBE_ERR_CONFIG; - goto out; - break; - } - - /* Set 802.3x based flow control settings. */ - mflcn_reg |= IXGBE_MFLCN_DPF; - IXGBE_WRITE_REG(hw, IXGBE_MFLCN, mflcn_reg); - IXGBE_WRITE_REG(hw, IXGBE_FCCFG, fccfg_reg); - - rx_pba_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(packetbuf_num)); - rx_pba_size >>= IXGBE_RXPBSIZE_SHIFT; - - fcrth = (rx_pba_size - hw->fc.high_water) << 10; - fcrtl = (rx_pba_size - hw->fc.low_water) << 10; - - if (hw->fc.current_mode & ixgbe_fc_tx_pause) { - fcrth |= IXGBE_FCRTH_FCEN; - if (hw->fc.send_xon) - fcrtl |= IXGBE_FCRTL_XONE; - } - - IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(packetbuf_num), fcrth); - IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(packetbuf_num), fcrtl); - - /* Configure pause time (2 TCs per register) */ - reg = IXGBE_READ_REG(hw, IXGBE_FCTTV(packetbuf_num / 2)); - if ((packetbuf_num & 1) == 0) - reg = (reg & 0xFFFF0000) | hw->fc.pause_time; - else - reg = (reg & 0x0000FFFF) | (hw->fc.pause_time << 16); - IXGBE_WRITE_REG(hw, IXGBE_FCTTV(packetbuf_num / 2), reg); - - IXGBE_WRITE_REG(hw, IXGBE_FCRTV, (hw->fc.pause_time >> 1)); - -out: - return ret_val; -} - -/** - * ixgbe_fc_autoneg - Configure flow control - * @hw: pointer to hardware structure - * - * Compares our advertised flow control capabilities to those advertised by - * our link partner, and determines the proper flow control mode to use. - **/ -s32 ixgbe_fc_autoneg(struct ixgbe_hw *hw) -{ - s32 ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED; - ixgbe_link_speed speed; - bool link_up; - - if (hw->fc.disable_fc_autoneg) - goto out; - - /* - * AN should have completed when the cable was plugged in. - * Look for reasons to bail out. Bail out if: - * - FC autoneg is disabled, or if - * - link is not up. - * - * Since we're being called from an LSC, link is already known to be up. - * So use link_up_wait_to_complete=false. - */ - hw->mac.ops.check_link(hw, &speed, &link_up, false); - if (!link_up) { - ret_val = IXGBE_ERR_FLOW_CONTROL; - goto out; - } - - switch (hw->phy.media_type) { - /* Autoneg flow control on fiber adapters */ - case ixgbe_media_type_fiber: - if (speed == IXGBE_LINK_SPEED_1GB_FULL) - ret_val = ixgbe_fc_autoneg_fiber(hw); - break; - - /* Autoneg flow control on backplane adapters */ - case ixgbe_media_type_backplane: - ret_val = ixgbe_fc_autoneg_backplane(hw); - break; - - /* Autoneg flow control on copper adapters */ - case ixgbe_media_type_copper: - if (ixgbe_device_supports_autoneg_fc(hw) == 0) - ret_val = ixgbe_fc_autoneg_copper(hw); - break; - - default: - break; - } - -out: - if (ret_val == 0) { - hw->fc.fc_was_autonegged = true; - } else { - hw->fc.fc_was_autonegged = false; - hw->fc.current_mode = hw->fc.requested_mode; - } - return ret_val; -} - -/** - * ixgbe_fc_autoneg_fiber - Enable flow control on 1 gig fiber - * @hw: pointer to hardware structure - * - * Enable flow control according on 1 gig fiber. - **/ -static s32 ixgbe_fc_autoneg_fiber(struct ixgbe_hw *hw) -{ - u32 pcs_anadv_reg, pcs_lpab_reg, linkstat; - s32 ret_val; - - /* - * On multispeed fiber at 1g, bail out if - * - link is up but AN did not complete, or if - * - link is up and AN completed but timed out - */ - - linkstat = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA); - if (((linkstat & IXGBE_PCS1GLSTA_AN_COMPLETE) == 0) || - ((linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1)) { - ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED; - goto out; - } - - pcs_anadv_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA); - pcs_lpab_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP); - - ret_val = ixgbe_negotiate_fc(hw, pcs_anadv_reg, - pcs_lpab_reg, IXGBE_PCS1GANA_SYM_PAUSE, - IXGBE_PCS1GANA_ASM_PAUSE, - IXGBE_PCS1GANA_SYM_PAUSE, - IXGBE_PCS1GANA_ASM_PAUSE); - -out: - return ret_val; -} - -/** - * ixgbe_fc_autoneg_backplane - Enable flow control IEEE clause 37 - * @hw: pointer to hardware structure - * - * Enable flow control according to IEEE clause 37. - **/ -static s32 ixgbe_fc_autoneg_backplane(struct ixgbe_hw *hw) -{ - u32 links2, anlp1_reg, autoc_reg, links; - s32 ret_val; - - /* - * On backplane, bail out if - * - backplane autoneg was not completed, or if - * - we are 82599 and link partner is not AN enabled - */ - links = IXGBE_READ_REG(hw, IXGBE_LINKS); - if ((links & IXGBE_LINKS_KX_AN_COMP) == 0) { - hw->fc.fc_was_autonegged = false; - hw->fc.current_mode = hw->fc.requested_mode; - ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED; - goto out; - } - - if (hw->mac.type == ixgbe_mac_82599EB) { - links2 = IXGBE_READ_REG(hw, IXGBE_LINKS2); - if ((links2 & IXGBE_LINKS2_AN_SUPPORTED) == 0) { - hw->fc.fc_was_autonegged = false; - hw->fc.current_mode = hw->fc.requested_mode; - ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED; - goto out; - } - } - /* - * Read the 10g AN autoc and LP ability registers and resolve - * local flow control settings accordingly - */ - autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); - anlp1_reg = IXGBE_READ_REG(hw, IXGBE_ANLP1); - - ret_val = ixgbe_negotiate_fc(hw, autoc_reg, - anlp1_reg, IXGBE_AUTOC_SYM_PAUSE, IXGBE_AUTOC_ASM_PAUSE, - IXGBE_ANLP1_SYM_PAUSE, IXGBE_ANLP1_ASM_PAUSE); - -out: - return ret_val; -} - -/** - * ixgbe_fc_autoneg_copper - Enable flow control IEEE clause 37 - * @hw: pointer to hardware structure - * - * Enable flow control according to IEEE clause 37. - **/ -static s32 ixgbe_fc_autoneg_copper(struct ixgbe_hw *hw) -{ - u16 technology_ability_reg = 0; - u16 lp_technology_ability_reg = 0; - - hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE, - MDIO_MMD_AN, - &technology_ability_reg); - hw->phy.ops.read_reg(hw, MDIO_AN_LPA, - MDIO_MMD_AN, - &lp_technology_ability_reg); - - return ixgbe_negotiate_fc(hw, (u32)technology_ability_reg, - (u32)lp_technology_ability_reg, - IXGBE_TAF_SYM_PAUSE, IXGBE_TAF_ASM_PAUSE, - IXGBE_TAF_SYM_PAUSE, IXGBE_TAF_ASM_PAUSE); -} - -/** - * ixgbe_negotiate_fc - Negotiate flow control - * @hw: pointer to hardware structure - * @adv_reg: flow control advertised settings - * @lp_reg: link partner's flow control settings - * @adv_sym: symmetric pause bit in advertisement - * @adv_asm: asymmetric pause bit in advertisement - * @lp_sym: symmetric pause bit in link partner advertisement - * @lp_asm: asymmetric pause bit in link partner advertisement - * - * Find the intersection between advertised settings and link partner's - * advertised settings - **/ -static s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg, - u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm) -{ - if ((!(adv_reg)) || (!(lp_reg))) - return IXGBE_ERR_FC_NOT_NEGOTIATED; - - if ((adv_reg & adv_sym) && (lp_reg & lp_sym)) { - /* - * Now we need to check if the user selected Rx ONLY - * of pause frames. In this case, we had to advertise - * FULL flow control because we could not advertise RX - * ONLY. Hence, we must now check to see if we need to - * turn OFF the TRANSMISSION of PAUSE frames. - */ - if (hw->fc.requested_mode == ixgbe_fc_full) { - hw->fc.current_mode = ixgbe_fc_full; - hw_dbg(hw, "Flow Control = FULL.\n"); - } else { - hw->fc.current_mode = ixgbe_fc_rx_pause; - hw_dbg(hw, "Flow Control=RX PAUSE frames only\n"); - } - } else if (!(adv_reg & adv_sym) && (adv_reg & adv_asm) && - (lp_reg & lp_sym) && (lp_reg & lp_asm)) { - hw->fc.current_mode = ixgbe_fc_tx_pause; - hw_dbg(hw, "Flow Control = TX PAUSE frames only.\n"); - } else if ((adv_reg & adv_sym) && (adv_reg & adv_asm) && - !(lp_reg & lp_sym) && (lp_reg & lp_asm)) { - hw->fc.current_mode = ixgbe_fc_rx_pause; - hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n"); - } else { - hw->fc.current_mode = ixgbe_fc_none; - hw_dbg(hw, "Flow Control = NONE.\n"); - } - return 0; -} - -/** - * ixgbe_setup_fc - Set up flow control - * @hw: pointer to hardware structure - * - * Called at init time to set up flow control. - **/ -static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num) -{ - s32 ret_val = 0; - u32 reg = 0, reg_bp = 0; - u16 reg_cu = 0; - -#ifdef CONFIG_DCB - if (hw->fc.requested_mode == ixgbe_fc_pfc) { - hw->fc.current_mode = hw->fc.requested_mode; - goto out; - } - -#endif /* CONFIG_DCB */ - /* Validate the packetbuf configuration */ - if (packetbuf_num < 0 || packetbuf_num > 7) { - hw_dbg(hw, "Invalid packet buffer number [%d], expected range " - "is 0-7\n", packetbuf_num); - ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; - goto out; - } - - /* - * Validate the water mark configuration. Zero water marks are invalid - * because it causes the controller to just blast out fc packets. - */ - if (!hw->fc.low_water || !hw->fc.high_water || !hw->fc.pause_time) { - hw_dbg(hw, "Invalid water mark configuration\n"); - ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; - goto out; - } - - /* - * Validate the requested mode. Strict IEEE mode does not allow - * ixgbe_fc_rx_pause because it will cause us to fail at UNH. - */ - if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) { - hw_dbg(hw, "ixgbe_fc_rx_pause not valid in strict " - "IEEE mode\n"); - ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; - goto out; - } - - /* - * 10gig parts do not have a word in the EEPROM to determine the - * default flow control setting, so we explicitly set it to full. - */ - if (hw->fc.requested_mode == ixgbe_fc_default) - hw->fc.requested_mode = ixgbe_fc_full; - - /* - * Set up the 1G and 10G flow control advertisement registers so the - * HW will be able to do fc autoneg once the cable is plugged in. If - * we link at 10G, the 1G advertisement is harmless and vice versa. - */ - - switch (hw->phy.media_type) { - case ixgbe_media_type_fiber: - case ixgbe_media_type_backplane: - reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA); - reg_bp = IXGBE_READ_REG(hw, IXGBE_AUTOC); - break; - - case ixgbe_media_type_copper: - hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE, - MDIO_MMD_AN, ®_cu); - break; - - default: - ; - } - - /* - * The possible values of fc.requested_mode are: - * 0: Flow control is completely disabled - * 1: Rx flow control is enabled (we can receive pause frames, - * but not send pause frames). - * 2: Tx flow control is enabled (we can send pause frames but - * we do not support receiving pause frames). - * 3: Both Rx and Tx flow control (symmetric) are enabled. -#ifdef CONFIG_DCB - * 4: Priority Flow Control is enabled. -#endif - * other: Invalid. - */ - switch (hw->fc.requested_mode) { - case ixgbe_fc_none: - /* Flow control completely disabled by software override. */ - reg &= ~(IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE); - if (hw->phy.media_type == ixgbe_media_type_backplane) - reg_bp &= ~(IXGBE_AUTOC_SYM_PAUSE | - IXGBE_AUTOC_ASM_PAUSE); - else if (hw->phy.media_type == ixgbe_media_type_copper) - reg_cu &= ~(IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE); - break; - case ixgbe_fc_rx_pause: - /* - * Rx Flow control is enabled and Tx Flow control is - * disabled by software override. Since there really - * isn't a way to advertise that we are capable of RX - * Pause ONLY, we will advertise that we support both - * symmetric and asymmetric Rx PAUSE. Later, we will - * disable the adapter's ability to send PAUSE frames. - */ - reg |= (IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE); - if (hw->phy.media_type == ixgbe_media_type_backplane) - reg_bp |= (IXGBE_AUTOC_SYM_PAUSE | - IXGBE_AUTOC_ASM_PAUSE); - else if (hw->phy.media_type == ixgbe_media_type_copper) - reg_cu |= (IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE); - break; - case ixgbe_fc_tx_pause: - /* - * Tx Flow control is enabled, and Rx Flow control is - * disabled by software override. - */ - reg |= (IXGBE_PCS1GANA_ASM_PAUSE); - reg &= ~(IXGBE_PCS1GANA_SYM_PAUSE); - if (hw->phy.media_type == ixgbe_media_type_backplane) { - reg_bp |= (IXGBE_AUTOC_ASM_PAUSE); - reg_bp &= ~(IXGBE_AUTOC_SYM_PAUSE); - } else if (hw->phy.media_type == ixgbe_media_type_copper) { - reg_cu |= (IXGBE_TAF_ASM_PAUSE); - reg_cu &= ~(IXGBE_TAF_SYM_PAUSE); - } - break; - case ixgbe_fc_full: - /* Flow control (both Rx and Tx) is enabled by SW override. */ - reg |= (IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE); - if (hw->phy.media_type == ixgbe_media_type_backplane) - reg_bp |= (IXGBE_AUTOC_SYM_PAUSE | - IXGBE_AUTOC_ASM_PAUSE); - else if (hw->phy.media_type == ixgbe_media_type_copper) - reg_cu |= (IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE); - break; -#ifdef CONFIG_DCB - case ixgbe_fc_pfc: - goto out; - break; -#endif /* CONFIG_DCB */ - default: - hw_dbg(hw, "Flow control param set incorrectly\n"); - ret_val = IXGBE_ERR_CONFIG; - goto out; - break; - } - - if (hw->mac.type != ixgbe_mac_X540) { - /* - * Enable auto-negotiation between the MAC & PHY; - * the MAC will advertise clause 37 flow control. - */ - IXGBE_WRITE_REG(hw, IXGBE_PCS1GANA, reg); - reg = IXGBE_READ_REG(hw, IXGBE_PCS1GLCTL); - - /* Disable AN timeout */ - if (hw->fc.strict_ieee) - reg &= ~IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN; - - IXGBE_WRITE_REG(hw, IXGBE_PCS1GLCTL, reg); - hw_dbg(hw, "Set up FC; PCS1GLCTL = 0x%08X\n", reg); - } - - /* - * AUTOC restart handles negotiation of 1G and 10G on backplane - * and copper. There is no need to set the PCS1GCTL register. - * - */ - if (hw->phy.media_type == ixgbe_media_type_backplane) { - reg_bp |= IXGBE_AUTOC_AN_RESTART; - IXGBE_WRITE_REG(hw, IXGBE_AUTOC, reg_bp); - } else if ((hw->phy.media_type == ixgbe_media_type_copper) && - (ixgbe_device_supports_autoneg_fc(hw) == 0)) { - hw->phy.ops.write_reg(hw, MDIO_AN_ADVERTISE, - MDIO_MMD_AN, reg_cu); - } - - hw_dbg(hw, "Set up FC; IXGBE_AUTOC = 0x%08X\n", reg); -out: - return ret_val; -} - -/** - * ixgbe_disable_pcie_master - Disable PCI-express master access - * @hw: pointer to hardware structure - * - * Disables PCI-Express master access and verifies there are no pending - * requests. IXGBE_ERR_MASTER_REQUESTS_PENDING is returned if master disable - * bit hasn't caused the master requests to be disabled, else 0 - * is returned signifying master requests disabled. - **/ -s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw) -{ - struct ixgbe_adapter *adapter = hw->back; - u32 i; - u32 reg_val; - u32 number_of_queues; - s32 status = 0; - u16 dev_status = 0; - - /* Just jump out if bus mastering is already disabled */ - if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO)) - goto out; - - /* Disable the receive unit by stopping each queue */ - number_of_queues = hw->mac.max_rx_queues; - for (i = 0; i < number_of_queues; i++) { - reg_val = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i)); - if (reg_val & IXGBE_RXDCTL_ENABLE) { - reg_val &= ~IXGBE_RXDCTL_ENABLE; - IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(i), reg_val); - } - } - - reg_val = IXGBE_READ_REG(hw, IXGBE_CTRL); - reg_val |= IXGBE_CTRL_GIO_DIS; - IXGBE_WRITE_REG(hw, IXGBE_CTRL, reg_val); - - for (i = 0; i < IXGBE_PCI_MASTER_DISABLE_TIMEOUT; i++) { - if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO)) - goto check_device_status; - udelay(100); - } - - hw_dbg(hw, "GIO Master Disable bit didn't clear - requesting resets\n"); - status = IXGBE_ERR_MASTER_REQUESTS_PENDING; - - /* - * Before proceeding, make sure that the PCIe block does not have - * transactions pending. - */ -check_device_status: - for (i = 0; i < IXGBE_PCI_MASTER_DISABLE_TIMEOUT; i++) { - pci_read_config_word(adapter->pdev, IXGBE_PCI_DEVICE_STATUS, - &dev_status); - if (!(dev_status & IXGBE_PCI_DEVICE_STATUS_TRANSACTION_PENDING)) - break; - udelay(100); - } - - if (i == IXGBE_PCI_MASTER_DISABLE_TIMEOUT) - hw_dbg(hw, "PCIe transaction pending bit also did not clear.\n"); - else - goto out; - - /* - * Two consecutive resets are required via CTRL.RST per datasheet - * 5.2.5.3.2 Master Disable. We set a flag to inform the reset routine - * of this need. The first reset prevents new master requests from - * being issued by our device. We then must wait 1usec for any - * remaining completions from the PCIe bus to trickle in, and then reset - * again to clear out any effects they may have had on our device. - */ - hw->mac.flags |= IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; - -out: - return status; -} - - -/** - * ixgbe_acquire_swfw_sync - Acquire SWFW semaphore - * @hw: pointer to hardware structure - * @mask: Mask to specify which semaphore to acquire - * - * Acquires the SWFW semaphore through the GSSR register for the specified - * function (CSR, PHY0, PHY1, EEPROM, Flash) - **/ -s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask) -{ - u32 gssr; - u32 swmask = mask; - u32 fwmask = mask << 5; - s32 timeout = 200; - - while (timeout) { - /* - * SW EEPROM semaphore bit is used for access to all - * SW_FW_SYNC/GSSR bits (not just EEPROM) - */ - if (ixgbe_get_eeprom_semaphore(hw)) - return IXGBE_ERR_SWFW_SYNC; - - gssr = IXGBE_READ_REG(hw, IXGBE_GSSR); - if (!(gssr & (fwmask | swmask))) - break; - - /* - * Firmware currently using resource (fwmask) or other software - * thread currently using resource (swmask) - */ - ixgbe_release_eeprom_semaphore(hw); - usleep_range(5000, 10000); - timeout--; - } - - if (!timeout) { - hw_dbg(hw, "Driver can't access resource, SW_FW_SYNC timeout.\n"); - return IXGBE_ERR_SWFW_SYNC; - } - - gssr |= swmask; - IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr); - - ixgbe_release_eeprom_semaphore(hw); - return 0; -} - -/** - * ixgbe_release_swfw_sync - Release SWFW semaphore - * @hw: pointer to hardware structure - * @mask: Mask to specify which semaphore to release - * - * Releases the SWFW semaphore through the GSSR register for the specified - * function (CSR, PHY0, PHY1, EEPROM, Flash) - **/ -void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u16 mask) -{ - u32 gssr; - u32 swmask = mask; - - ixgbe_get_eeprom_semaphore(hw); - - gssr = IXGBE_READ_REG(hw, IXGBE_GSSR); - gssr &= ~swmask; - IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr); - - ixgbe_release_eeprom_semaphore(hw); -} - -/** - * ixgbe_enable_rx_dma_generic - Enable the Rx DMA unit - * @hw: pointer to hardware structure - * @regval: register value to write to RXCTRL - * - * Enables the Rx DMA unit - **/ -s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval) -{ - IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, regval); - - return 0; -} - -/** - * ixgbe_blink_led_start_generic - Blink LED based on index. - * @hw: pointer to hardware structure - * @index: led number to blink - **/ -s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index) -{ - ixgbe_link_speed speed = 0; - bool link_up = 0; - u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); - u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); - - /* - * Link must be up to auto-blink the LEDs; - * Force it if link is down. - */ - hw->mac.ops.check_link(hw, &speed, &link_up, false); - - if (!link_up) { - autoc_reg |= IXGBE_AUTOC_AN_RESTART; - autoc_reg |= IXGBE_AUTOC_FLU; - IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); - IXGBE_WRITE_FLUSH(hw); - usleep_range(10000, 20000); - } - - led_reg &= ~IXGBE_LED_MODE_MASK(index); - led_reg |= IXGBE_LED_BLINK(index); - IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); - IXGBE_WRITE_FLUSH(hw); - - return 0; -} - -/** - * ixgbe_blink_led_stop_generic - Stop blinking LED based on index. - * @hw: pointer to hardware structure - * @index: led number to stop blinking - **/ -s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index) -{ - u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); - u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); - - autoc_reg &= ~IXGBE_AUTOC_FLU; - autoc_reg |= IXGBE_AUTOC_AN_RESTART; - IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); - - led_reg &= ~IXGBE_LED_MODE_MASK(index); - led_reg &= ~IXGBE_LED_BLINK(index); - led_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index); - IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); - IXGBE_WRITE_FLUSH(hw); - - return 0; -} - -/** - * ixgbe_get_san_mac_addr_offset - Get SAN MAC address offset from the EEPROM - * @hw: pointer to hardware structure - * @san_mac_offset: SAN MAC address offset - * - * This function will read the EEPROM location for the SAN MAC address - * pointer, and returns the value at that location. This is used in both - * get and set mac_addr routines. - **/ -static s32 ixgbe_get_san_mac_addr_offset(struct ixgbe_hw *hw, - u16 *san_mac_offset) -{ - /* - * First read the EEPROM pointer to see if the MAC addresses are - * available. - */ - hw->eeprom.ops.read(hw, IXGBE_SAN_MAC_ADDR_PTR, san_mac_offset); - - return 0; -} - -/** - * ixgbe_get_san_mac_addr_generic - SAN MAC address retrieval from the EEPROM - * @hw: pointer to hardware structure - * @san_mac_addr: SAN MAC address - * - * Reads the SAN MAC address from the EEPROM, if it's available. This is - * per-port, so set_lan_id() must be called before reading the addresses. - * set_lan_id() is called by identify_sfp(), but this cannot be relied - * upon for non-SFP connections, so we must call it here. - **/ -s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr) -{ - u16 san_mac_data, san_mac_offset; - u8 i; - - /* - * First read the EEPROM pointer to see if the MAC addresses are - * available. If they're not, no point in calling set_lan_id() here. - */ - ixgbe_get_san_mac_addr_offset(hw, &san_mac_offset); - - if ((san_mac_offset == 0) || (san_mac_offset == 0xFFFF)) { - /* - * No addresses available in this EEPROM. It's not an - * error though, so just wipe the local address and return. - */ - for (i = 0; i < 6; i++) - san_mac_addr[i] = 0xFF; - - goto san_mac_addr_out; - } - - /* make sure we know which port we need to program */ - hw->mac.ops.set_lan_id(hw); - /* apply the port offset to the address offset */ - (hw->bus.func) ? (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT1_OFFSET) : - (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT0_OFFSET); - for (i = 0; i < 3; i++) { - hw->eeprom.ops.read(hw, san_mac_offset, &san_mac_data); - san_mac_addr[i * 2] = (u8)(san_mac_data); - san_mac_addr[i * 2 + 1] = (u8)(san_mac_data >> 8); - san_mac_offset++; - } - -san_mac_addr_out: - return 0; -} - -/** - * ixgbe_get_pcie_msix_count_generic - Gets MSI-X vector count - * @hw: pointer to hardware structure - * - * Read PCIe configuration space, and get the MSI-X vector count from - * the capabilities table. - **/ -u32 ixgbe_get_pcie_msix_count_generic(struct ixgbe_hw *hw) -{ - struct ixgbe_adapter *adapter = hw->back; - u16 msix_count; - pci_read_config_word(adapter->pdev, IXGBE_PCIE_MSIX_82599_CAPS, - &msix_count); - msix_count &= IXGBE_PCIE_MSIX_TBL_SZ_MASK; - - /* MSI-X count is zero-based in HW, so increment to give proper value */ - msix_count++; - - return msix_count; -} - -/** - * ixgbe_clear_vmdq_generic - Disassociate a VMDq pool index from a rx address - * @hw: pointer to hardware struct - * @rar: receive address register index to disassociate - * @vmdq: VMDq pool index to remove from the rar - **/ -s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq) -{ - u32 mpsar_lo, mpsar_hi; - u32 rar_entries = hw->mac.num_rar_entries; - - /* Make sure we are using a valid rar index range */ - if (rar >= rar_entries) { - hw_dbg(hw, "RAR index %d is out of range.\n", rar); - return IXGBE_ERR_INVALID_ARGUMENT; - } - - mpsar_lo = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar)); - mpsar_hi = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar)); - - if (!mpsar_lo && !mpsar_hi) - goto done; - - if (vmdq == IXGBE_CLEAR_VMDQ_ALL) { - if (mpsar_lo) { - IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 0); - mpsar_lo = 0; - } - if (mpsar_hi) { - IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 0); - mpsar_hi = 0; - } - } else if (vmdq < 32) { - mpsar_lo &= ~(1 << vmdq); - IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar_lo); - } else { - mpsar_hi &= ~(1 << (vmdq - 32)); - IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar_hi); - } - - /* was that the last pool using this rar? */ - if (mpsar_lo == 0 && mpsar_hi == 0 && rar != 0) - hw->mac.ops.clear_rar(hw, rar); -done: - return 0; -} - -/** - * ixgbe_set_vmdq_generic - Associate a VMDq pool index with a rx address - * @hw: pointer to hardware struct - * @rar: receive address register index to associate with a VMDq index - * @vmdq: VMDq pool index - **/ -s32 ixgbe_set_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq) -{ - u32 mpsar; - u32 rar_entries = hw->mac.num_rar_entries; - - /* Make sure we are using a valid rar index range */ - if (rar >= rar_entries) { - hw_dbg(hw, "RAR index %d is out of range.\n", rar); - return IXGBE_ERR_INVALID_ARGUMENT; - } - - if (vmdq < 32) { - mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar)); - mpsar |= 1 << vmdq; - IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar); - } else { - mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar)); - mpsar |= 1 << (vmdq - 32); - IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar); - } - return 0; -} - -/** - * ixgbe_init_uta_tables_generic - Initialize the Unicast Table Array - * @hw: pointer to hardware structure - **/ -s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw) -{ - int i; - - for (i = 0; i < 128; i++) - IXGBE_WRITE_REG(hw, IXGBE_UTA(i), 0); - - return 0; -} - -/** - * ixgbe_find_vlvf_slot - find the vlanid or the first empty slot - * @hw: pointer to hardware structure - * @vlan: VLAN id to write to VLAN filter - * - * return the VLVF index where this VLAN id should be placed - * - **/ -static s32 ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan) -{ - u32 bits = 0; - u32 first_empty_slot = 0; - s32 regindex; - - /* short cut the special case */ - if (vlan == 0) - return 0; - - /* - * Search for the vlan id in the VLVF entries. Save off the first empty - * slot found along the way - */ - for (regindex = 1; regindex < IXGBE_VLVF_ENTRIES; regindex++) { - bits = IXGBE_READ_REG(hw, IXGBE_VLVF(regindex)); - if (!bits && !(first_empty_slot)) - first_empty_slot = regindex; - else if ((bits & 0x0FFF) == vlan) - break; - } - - /* - * If regindex is less than IXGBE_VLVF_ENTRIES, then we found the vlan - * in the VLVF. Else use the first empty VLVF register for this - * vlan id. - */ - if (regindex >= IXGBE_VLVF_ENTRIES) { - if (first_empty_slot) - regindex = first_empty_slot; - else { - hw_dbg(hw, "No space in VLVF.\n"); - regindex = IXGBE_ERR_NO_SPACE; - } - } - - return regindex; -} - -/** - * ixgbe_set_vfta_generic - Set VLAN filter table - * @hw: pointer to hardware structure - * @vlan: VLAN id to write to VLAN filter - * @vind: VMDq output index that maps queue to VLAN id in VFVFB - * @vlan_on: boolean flag to turn on/off VLAN in VFVF - * - * Turn on/off specified VLAN in the VLAN filter table. - **/ -s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind, - bool vlan_on) -{ - s32 regindex; - u32 bitindex; - u32 vfta; - u32 bits; - u32 vt; - u32 targetbit; - bool vfta_changed = false; - - if (vlan > 4095) - return IXGBE_ERR_PARAM; - - /* - * this is a 2 part operation - first the VFTA, then the - * VLVF and VLVFB if VT Mode is set - * We don't write the VFTA until we know the VLVF part succeeded. - */ - - /* Part 1 - * The VFTA is a bitstring made up of 128 32-bit registers - * that enable the particular VLAN id, much like the MTA: - * bits[11-5]: which register - * bits[4-0]: which bit in the register - */ - regindex = (vlan >> 5) & 0x7F; - bitindex = vlan & 0x1F; - targetbit = (1 << bitindex); - vfta = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex)); - - if (vlan_on) { - if (!(vfta & targetbit)) { - vfta |= targetbit; - vfta_changed = true; - } - } else { - if ((vfta & targetbit)) { - vfta &= ~targetbit; - vfta_changed = true; - } - } - - /* Part 2 - * If VT Mode is set - * Either vlan_on - * make sure the vlan is in VLVF - * set the vind bit in the matching VLVFB - * Or !vlan_on - * clear the pool bit and possibly the vind - */ - vt = IXGBE_READ_REG(hw, IXGBE_VT_CTL); - if (vt & IXGBE_VT_CTL_VT_ENABLE) { - s32 vlvf_index; - - vlvf_index = ixgbe_find_vlvf_slot(hw, vlan); - if (vlvf_index < 0) - return vlvf_index; - - if (vlan_on) { - /* set the pool bit */ - if (vind < 32) { - bits = IXGBE_READ_REG(hw, - IXGBE_VLVFB(vlvf_index*2)); - bits |= (1 << vind); - IXGBE_WRITE_REG(hw, - IXGBE_VLVFB(vlvf_index*2), - bits); - } else { - bits = IXGBE_READ_REG(hw, - IXGBE_VLVFB((vlvf_index*2)+1)); - bits |= (1 << (vind-32)); - IXGBE_WRITE_REG(hw, - IXGBE_VLVFB((vlvf_index*2)+1), - bits); - } - } else { - /* clear the pool bit */ - if (vind < 32) { - bits = IXGBE_READ_REG(hw, - IXGBE_VLVFB(vlvf_index*2)); - bits &= ~(1 << vind); - IXGBE_WRITE_REG(hw, - IXGBE_VLVFB(vlvf_index*2), - bits); - bits |= IXGBE_READ_REG(hw, - IXGBE_VLVFB((vlvf_index*2)+1)); - } else { - bits = IXGBE_READ_REG(hw, - IXGBE_VLVFB((vlvf_index*2)+1)); - bits &= ~(1 << (vind-32)); - IXGBE_WRITE_REG(hw, - IXGBE_VLVFB((vlvf_index*2)+1), - bits); - bits |= IXGBE_READ_REG(hw, - IXGBE_VLVFB(vlvf_index*2)); - } - } - - /* - * If there are still bits set in the VLVFB registers - * for the VLAN ID indicated we need to see if the - * caller is requesting that we clear the VFTA entry bit. - * If the caller has requested that we clear the VFTA - * entry bit but there are still pools/VFs using this VLAN - * ID entry then ignore the request. We're not worried - * about the case where we're turning the VFTA VLAN ID - * entry bit on, only when requested to turn it off as - * there may be multiple pools and/or VFs using the - * VLAN ID entry. In that case we cannot clear the - * VFTA bit until all pools/VFs using that VLAN ID have also - * been cleared. This will be indicated by "bits" being - * zero. - */ - if (bits) { - IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), - (IXGBE_VLVF_VIEN | vlan)); - if (!vlan_on) { - /* someone wants to clear the vfta entry - * but some pools/VFs are still using it. - * Ignore it. */ - vfta_changed = false; - } - } - else - IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), 0); - } - - if (vfta_changed) - IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), vfta); - - return 0; -} - -/** - * ixgbe_clear_vfta_generic - Clear VLAN filter table - * @hw: pointer to hardware structure - * - * Clears the VLAN filer table, and the VMDq index associated with the filter - **/ -s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw) -{ - u32 offset; - - for (offset = 0; offset < hw->mac.vft_size; offset++) - IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0); - - for (offset = 0; offset < IXGBE_VLVF_ENTRIES; offset++) { - IXGBE_WRITE_REG(hw, IXGBE_VLVF(offset), 0); - IXGBE_WRITE_REG(hw, IXGBE_VLVFB(offset*2), 0); - IXGBE_WRITE_REG(hw, IXGBE_VLVFB((offset*2)+1), 0); - } - - return 0; -} - -/** - * ixgbe_check_mac_link_generic - Determine link and speed status - * @hw: pointer to hardware structure - * @speed: pointer to link speed - * @link_up: true when link is up - * @link_up_wait_to_complete: bool used to wait for link up or not - * - * Reads the links register to determine if link is up and the current speed - **/ -s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed, - bool *link_up, bool link_up_wait_to_complete) -{ - u32 links_reg, links_orig; - u32 i; - - /* clear the old state */ - links_orig = IXGBE_READ_REG(hw, IXGBE_LINKS); - - links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); - - if (links_orig != links_reg) { - hw_dbg(hw, "LINKS changed from %08X to %08X\n", - links_orig, links_reg); - } - - if (link_up_wait_to_complete) { - for (i = 0; i < IXGBE_LINK_UP_TIME; i++) { - if (links_reg & IXGBE_LINKS_UP) { - *link_up = true; - break; - } else { - *link_up = false; - } - msleep(100); - links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); - } - } else { - if (links_reg & IXGBE_LINKS_UP) - *link_up = true; - else - *link_up = false; - } - - if ((links_reg & IXGBE_LINKS_SPEED_82599) == - IXGBE_LINKS_SPEED_10G_82599) - *speed = IXGBE_LINK_SPEED_10GB_FULL; - else if ((links_reg & IXGBE_LINKS_SPEED_82599) == - IXGBE_LINKS_SPEED_1G_82599) - *speed = IXGBE_LINK_SPEED_1GB_FULL; - else if ((links_reg & IXGBE_LINKS_SPEED_82599) == - IXGBE_LINKS_SPEED_100_82599) - *speed = IXGBE_LINK_SPEED_100_FULL; - else - *speed = IXGBE_LINK_SPEED_UNKNOWN; - - /* if link is down, zero out the current_mode */ - if (*link_up == false) { - hw->fc.current_mode = ixgbe_fc_none; - hw->fc.fc_was_autonegged = false; - } - - return 0; -} - -/** - * ixgbe_get_wwn_prefix_generic Get alternative WWNN/WWPN prefix from - * the EEPROM - * @hw: pointer to hardware structure - * @wwnn_prefix: the alternative WWNN prefix - * @wwpn_prefix: the alternative WWPN prefix - * - * This function will read the EEPROM from the alternative SAN MAC address - * block to check the support for the alternative WWNN/WWPN prefix support. - **/ -s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix, - u16 *wwpn_prefix) -{ - u16 offset, caps; - u16 alt_san_mac_blk_offset; - - /* clear output first */ - *wwnn_prefix = 0xFFFF; - *wwpn_prefix = 0xFFFF; - - /* check if alternative SAN MAC is supported */ - hw->eeprom.ops.read(hw, IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR, - &alt_san_mac_blk_offset); - - if ((alt_san_mac_blk_offset == 0) || - (alt_san_mac_blk_offset == 0xFFFF)) - goto wwn_prefix_out; - - /* check capability in alternative san mac address block */ - offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET; - hw->eeprom.ops.read(hw, offset, &caps); - if (!(caps & IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN)) - goto wwn_prefix_out; - - /* get the corresponding prefix for WWNN/WWPN */ - offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET; - hw->eeprom.ops.read(hw, offset, wwnn_prefix); - - offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET; - hw->eeprom.ops.read(hw, offset, wwpn_prefix); - -wwn_prefix_out: - return 0; -} - -/** - * ixgbe_device_supports_autoneg_fc - Check if phy supports autoneg flow - * control - * @hw: pointer to hardware structure - * - * There are several phys that do not support autoneg flow control. This - * function check the device id to see if the associated phy supports - * autoneg flow control. - **/ -static s32 ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw) -{ - - switch (hw->device_id) { - case IXGBE_DEV_ID_X540T: - return 0; - case IXGBE_DEV_ID_82599_T3_LOM: - return 0; - default: - return IXGBE_ERR_FC_NOT_SUPPORTED; - } -} - -/** - * ixgbe_set_mac_anti_spoofing - Enable/Disable MAC anti-spoofing - * @hw: pointer to hardware structure - * @enable: enable or disable switch for anti-spoofing - * @pf: Physical Function pool - do not enable anti-spoofing for the PF - * - **/ -void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int pf) -{ - int j; - int pf_target_reg = pf >> 3; - int pf_target_shift = pf % 8; - u32 pfvfspoof = 0; - - if (hw->mac.type == ixgbe_mac_82598EB) - return; - - if (enable) - pfvfspoof = IXGBE_SPOOF_MACAS_MASK; - - /* - * PFVFSPOOF register array is size 8 with 8 bits assigned to - * MAC anti-spoof enables in each register array element. - */ - for (j = 0; j < IXGBE_PFVFSPOOF_REG_COUNT; j++) - IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(j), pfvfspoof); - - /* If not enabling anti-spoofing then done */ - if (!enable) - return; - - /* - * The PF should be allowed to spoof so that it can support - * emulation mode NICs. Reset the bit assigned to the PF - */ - pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(pf_target_reg)); - pfvfspoof ^= (1 << pf_target_shift); - IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(pf_target_reg), pfvfspoof); -} - -/** - * ixgbe_set_vlan_anti_spoofing - Enable/Disable VLAN anti-spoofing - * @hw: pointer to hardware structure - * @enable: enable or disable switch for VLAN anti-spoofing - * @pf: Virtual Function pool - VF Pool to set for VLAN anti-spoofing - * - **/ -void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf) -{ - int vf_target_reg = vf >> 3; - int vf_target_shift = vf % 8 + IXGBE_SPOOF_VLANAS_SHIFT; - u32 pfvfspoof; - - if (hw->mac.type == ixgbe_mac_82598EB) - return; - - pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg)); - if (enable) - pfvfspoof |= (1 << vf_target_shift); - else - pfvfspoof &= ~(1 << vf_target_shift); - IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), pfvfspoof); -} - -/** - * ixgbe_get_device_caps_generic - Get additional device capabilities - * @hw: pointer to hardware structure - * @device_caps: the EEPROM word with the extra device capabilities - * - * This function will read the EEPROM location for the device capabilities, - * and return the word through device_caps. - **/ -s32 ixgbe_get_device_caps_generic(struct ixgbe_hw *hw, u16 *device_caps) -{ - hw->eeprom.ops.read(hw, IXGBE_DEVICE_CAPS, device_caps); - - return 0; -} - -/** - * ixgbe_set_rxpba_generic - Initialize RX packet buffer - * @hw: pointer to hardware structure - * @num_pb: number of packet buffers to allocate - * @headroom: reserve n KB of headroom - * @strategy: packet buffer allocation strategy - **/ -void ixgbe_set_rxpba_generic(struct ixgbe_hw *hw, - int num_pb, - u32 headroom, - int strategy) -{ - u32 pbsize = hw->mac.rx_pb_size; - int i = 0; - u32 rxpktsize, txpktsize, txpbthresh; - - /* Reserve headroom */ - pbsize -= headroom; - - if (!num_pb) - num_pb = 1; - - /* Divide remaining packet buffer space amongst the number - * of packet buffers requested using supplied strategy. - */ - switch (strategy) { - case (PBA_STRATEGY_WEIGHTED): - /* pba_80_48 strategy weight first half of packet buffer with - * 5/8 of the packet buffer space. - */ - rxpktsize = ((pbsize * 5 * 2) / (num_pb * 8)); - pbsize -= rxpktsize * (num_pb / 2); - rxpktsize <<= IXGBE_RXPBSIZE_SHIFT; - for (; i < (num_pb / 2); i++) - IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize); - /* Fall through to configure remaining packet buffers */ - case (PBA_STRATEGY_EQUAL): - /* Divide the remaining Rx packet buffer evenly among the TCs */ - rxpktsize = (pbsize / (num_pb - i)) << IXGBE_RXPBSIZE_SHIFT; - for (; i < num_pb; i++) - IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize); - break; - default: - break; - } - - /* - * Setup Tx packet buffer and threshold equally for all TCs - * TXPBTHRESH register is set in K so divide by 1024 and subtract - * 10 since the largest packet we support is just over 9K. - */ - txpktsize = IXGBE_TXPBSIZE_MAX / num_pb; - txpbthresh = (txpktsize / 1024) - IXGBE_TXPKT_SIZE_MAX; - for (i = 0; i < num_pb; i++) { - IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), txpktsize); - IXGBE_WRITE_REG(hw, IXGBE_TXPBTHRESH(i), txpbthresh); - } - - /* Clear unused TCs, if any, to zero buffer size*/ - for (; i < IXGBE_MAX_PB; i++) { - IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), 0); - IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), 0); - IXGBE_WRITE_REG(hw, IXGBE_TXPBTHRESH(i), 0); - } -} - -/** - * ixgbe_calculate_checksum - Calculate checksum for buffer - * @buffer: pointer to EEPROM - * @length: size of EEPROM to calculate a checksum for - * Calculates the checksum for some buffer on a specified length. The - * checksum calculated is returned. - **/ -static u8 ixgbe_calculate_checksum(u8 *buffer, u32 length) -{ - u32 i; - u8 sum = 0; - - if (!buffer) - return 0; - - for (i = 0; i < length; i++) - sum += buffer[i]; - - return (u8) (0 - sum); -} - -/** - * ixgbe_host_interface_command - Issue command to manageability block - * @hw: pointer to the HW structure - * @buffer: contains the command to write and where the return status will - * be placed - * @lenght: lenght of buffer, must be multiple of 4 bytes - * - * Communicates with the manageability block. On success return 0 - * else return IXGBE_ERR_HOST_INTERFACE_COMMAND. - **/ -static s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u8 *buffer, - u32 length) -{ - u32 hicr, i; - u32 hdr_size = sizeof(struct ixgbe_hic_hdr); - u8 buf_len, dword_len; - - s32 ret_val = 0; - - if (length == 0 || length & 0x3 || - length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) { - hw_dbg(hw, "Buffer length failure.\n"); - ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND; - goto out; - } - - /* Check that the host interface is enabled. */ - hicr = IXGBE_READ_REG(hw, IXGBE_HICR); - if ((hicr & IXGBE_HICR_EN) == 0) { - hw_dbg(hw, "IXGBE_HOST_EN bit disabled.\n"); - ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND; - goto out; - } - - /* Calculate length in DWORDs */ - dword_len = length >> 2; - - /* - * The device driver writes the relevant command block - * into the ram area. - */ - for (i = 0; i < dword_len; i++) - IXGBE_WRITE_REG_ARRAY(hw, IXGBE_FLEX_MNG, - i, *((u32 *)buffer + i)); - - /* Setting this bit tells the ARC that a new command is pending. */ - IXGBE_WRITE_REG(hw, IXGBE_HICR, hicr | IXGBE_HICR_C); - - for (i = 0; i < IXGBE_HI_COMMAND_TIMEOUT; i++) { - hicr = IXGBE_READ_REG(hw, IXGBE_HICR); - if (!(hicr & IXGBE_HICR_C)) - break; - usleep_range(1000, 2000); - } - - /* Check command successful completion. */ - if (i == IXGBE_HI_COMMAND_TIMEOUT || - (!(IXGBE_READ_REG(hw, IXGBE_HICR) & IXGBE_HICR_SV))) { - hw_dbg(hw, "Command has failed with no status valid.\n"); - ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND; - goto out; - } - - /* Calculate length in DWORDs */ - dword_len = hdr_size >> 2; - - /* first pull in the header so we know the buffer length */ - for (i = 0; i < dword_len; i++) - *((u32 *)buffer + i) = - IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, i); - - /* If there is any thing in data position pull it in */ - buf_len = ((struct ixgbe_hic_hdr *)buffer)->buf_len; - if (buf_len == 0) - goto out; - - if (length < (buf_len + hdr_size)) { - hw_dbg(hw, "Buffer not large enough for reply message.\n"); - ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND; - goto out; - } - - /* Calculate length in DWORDs, add one for odd lengths */ - dword_len = (buf_len + 1) >> 2; - - /* Pull in the rest of the buffer (i is where we left off)*/ - for (; i < buf_len; i++) - *((u32 *)buffer + i) = - IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, i); - -out: - return ret_val; -} - -/** - * ixgbe_set_fw_drv_ver_generic - Sends driver version to firmware - * @hw: pointer to the HW structure - * @maj: driver version major number - * @min: driver version minor number - * @build: driver version build number - * @sub: driver version sub build number - * - * Sends driver version number to firmware through the manageability - * block. On success return 0 - * else returns IXGBE_ERR_SWFW_SYNC when encountering an error acquiring - * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails. - **/ -s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min, - u8 build, u8 sub) -{ - struct ixgbe_hic_drv_info fw_cmd; - int i; - s32 ret_val = 0; - - if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM) != 0) { - ret_val = IXGBE_ERR_SWFW_SYNC; - goto out; - } - - fw_cmd.hdr.cmd = FW_CEM_CMD_DRIVER_INFO; - fw_cmd.hdr.buf_len = FW_CEM_CMD_DRIVER_INFO_LEN; - fw_cmd.hdr.cmd_or_resp.cmd_resv = FW_CEM_CMD_RESERVED; - fw_cmd.port_num = (u8)hw->bus.func; - fw_cmd.ver_maj = maj; - fw_cmd.ver_min = min; - fw_cmd.ver_build = build; - fw_cmd.ver_sub = sub; - fw_cmd.hdr.checksum = 0; - fw_cmd.hdr.checksum = ixgbe_calculate_checksum((u8 *)&fw_cmd, - (FW_CEM_HDR_LEN + fw_cmd.hdr.buf_len)); - fw_cmd.pad = 0; - fw_cmd.pad2 = 0; - - for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) { - ret_val = ixgbe_host_interface_command(hw, (u8 *)&fw_cmd, - sizeof(fw_cmd)); - if (ret_val != 0) - continue; - - if (fw_cmd.hdr.cmd_or_resp.ret_status == - FW_CEM_RESP_STATUS_SUCCESS) - ret_val = 0; - else - ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND; - - break; - } - - hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM); -out: - return ret_val; -} |