ixgbe: update to latest common code module

This is a massive update that includes infrastructure for further patches
where we will add support for more phy types and eeprom types.

This code is shared as much as possible with other drivers, so the code may
seem a little obtuse at times but wherever possible we keep to the linux
style and methods.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

1 files changed, 71 insertions, 34 deletions

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index e18afa4e195f..df093ec830de 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -1749,14 +1749,16 @@ static void ixgbe_vlan_rx_register(struct net_device *netdev,
 static void ixgbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
 
 	/* add VID to filter table */
-	ixgbe_set_vfta(&adapter->hw, vid, 0, true);
+	hw->mac.ops.set_vfta(&adapter->hw, vid, 0, true);
 }
 
 static void ixgbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_hw *hw = &adapter->hw;
 
 	if (!test_bit(__IXGBE_DOWN, &adapter->state))
 		ixgbe_irq_disable(adapter);
@@ -1767,7 +1769,7 @@ static void ixgbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
 		ixgbe_irq_enable(adapter);
 
 	/* remove VID from filter table */
-	ixgbe_set_vfta(&adapter->hw, vid, 0, false);
+	hw->mac.ops.set_vfta(&adapter->hw, vid, 0, false);
 }
 
 static void ixgbe_restore_vlan(struct ixgbe_adapter *adapter)
@@ -1843,15 +1845,15 @@ static void ixgbe_set_rx_mode(struct net_device *netdev)
 	addr_count = netdev->uc_count;
 	if (addr_count)
 		addr_list = netdev->uc_list->dmi_addr;
-	ixgbe_update_uc_addr_list(hw, addr_list, addr_count,
-	                          ixgbe_addr_list_itr);
+	hw->mac.ops.update_uc_addr_list(hw, addr_list, addr_count,
+	                                  ixgbe_addr_list_itr);
 
 	/* reprogram multicast list */
 	addr_count = netdev->mc_count;
 	if (addr_count)
 		addr_list = netdev->mc_list->dmi_addr;
-	ixgbe_update_mc_addr_list(hw, addr_list, addr_count,
-	                          ixgbe_addr_list_itr);
+	hw->mac.ops.update_mc_addr_list(hw, addr_list, addr_count,
+	                                ixgbe_addr_list_itr);
 }
 
 static void ixgbe_napi_enable_all(struct ixgbe_adapter *adapter)
@@ -2016,11 +2018,12 @@ int ixgbe_up(struct ixgbe_adapter *adapter)
 
 void ixgbe_reset(struct ixgbe_adapter *adapter)
 {
-	if (ixgbe_init_hw(&adapter->hw))
-		DPRINTK(PROBE, ERR, "Hardware Error\n");
+	struct ixgbe_hw *hw = &adapter->hw;
+	if (hw->mac.ops.init_hw(hw))
+		dev_err(&adapter->pdev->dev, "Hardware Error\n");
 
 	/* reprogram the RAR[0] in case user changed it. */
-	ixgbe_set_rar(&adapter->hw, 0, adapter->hw.mac.addr, 0, IXGBE_RAH_AV);
+	hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV);
 
 }
 
@@ -2637,6 +2640,14 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
 	struct pci_dev *pdev = adapter->pdev;
 	unsigned int rss;
 
+	/* PCI config space info */
+
+	hw->vendor_id = pdev->vendor;
+	hw->device_id = pdev->device;
+	hw->revision_id = pdev->revision;
+	hw->subsystem_vendor_id = pdev->subsystem_vendor;
+	hw->subsystem_device_id = pdev->subsystem_device;
+
 	/* Set capability flags */
 	rss = min(IXGBE_MAX_RSS_INDICES, (int)num_online_cpus());
 	adapter->ring_feature[RING_F_RSS].indices = rss;
@@ -2652,15 +2663,6 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
 
 	/* select 10G link by default */
 	hw->mac.link_mode_select = IXGBE_AUTOC_LMS_10G_LINK_NO_AN;
-	if (hw->mac.ops.reset(hw)) {
-		dev_err(&pdev->dev, "HW Init failed\n");
-		return -EIO;
-	}
-	if (hw->mac.ops.setup_link_speed(hw, IXGBE_LINK_SPEED_10GB_FULL, true,
-					 false)) {
-		dev_err(&pdev->dev, "Link Speed setup failed\n");
-		return -EIO;
-	}
 
 	/* enable itr by default in dynamic mode */
 	adapter->itr_setting = 1;
@@ -2675,7 +2677,7 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
 	adapter->rx_ring_count = IXGBE_DEFAULT_RXD;
 
 	/* initialize eeprom parameters */
-	if (ixgbe_init_eeprom(hw)) {
+	if (ixgbe_init_eeprom_params_generic(hw)) {
 		dev_err(&pdev->dev, "EEPROM initialization failed\n");
 		return -EIO;
 	}
@@ -3622,7 +3624,7 @@ static int ixgbe_set_mac(struct net_device *netdev, void *p)
 	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
 	memcpy(adapter->hw.mac.addr, addr->sa_data, netdev->addr_len);
 
-	ixgbe_set_rar(&adapter->hw, 0, adapter->hw.mac.addr, 0, IXGBE_RAH_AV);
+	adapter->hw.mac.ops.set_rar(&adapter->hw, 0, adapter->hw.mac.addr, 0, IXGBE_RAH_AV);
 
 	return 0;
 }
@@ -3646,6 +3648,22 @@ static void ixgbe_netpoll(struct net_device *netdev)
 #endif
 
 /**
+ * ixgbe_link_config - set up initial link with default speed and duplex
+ * @hw: pointer to private hardware struct
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int ixgbe_link_config(struct ixgbe_hw *hw)
+{
+	u32 autoneg = IXGBE_LINK_SPEED_10GB_FULL;
+
+	/* must always autoneg for both 1G and 10G link */
+	hw->mac.autoneg = true;
+
+	return hw->mac.ops.setup_link_speed(hw, autoneg, true, true);
+}
+
+/**
  * ixgbe_napi_add_all - prep napi structs for use
  * @adapter: private struct
  * helper function to napi_add each possible q_vector->napi
@@ -3691,7 +3709,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	static int cards_found;
 	int i, err, pci_using_dac;
 	u16 link_status, link_speed, link_width;
-	u32 part_num;
+	u32 part_num, eec;
 
 	err = pci_enable_device(pdev);
 	if (err)
@@ -3705,8 +3723,8 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 		if (err) {
 			err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
 			if (err) {
-				dev_err(&pdev->dev, "No usable DMA "
-					"configuration, aborting\n");
+				dev_err(&pdev->dev, "No usable DMA configuration, "
+				          "aborting\n");
 				goto err_dma;
 			}
 		}
@@ -3772,17 +3790,21 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 
 	adapter->bd_number = cards_found;
 
-	/* PCI config space info */
-	hw->vendor_id = pdev->vendor;
-	hw->device_id = pdev->device;
-	hw->revision_id = pdev->revision;
-	hw->subsystem_vendor_id = pdev->subsystem_vendor;
-	hw->subsystem_device_id = pdev->subsystem_device;
-
 	/* Setup hw api */
 	memcpy(&hw->mac.ops, ii->mac_ops, sizeof(hw->mac.ops));
 	hw->mac.type  = ii->mac;
 
+	/* EEPROM */
+	memcpy(&hw->eeprom.ops, ii->eeprom_ops, sizeof(hw->eeprom.ops));
+	eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+	/* If EEPROM is valid (bit 8 = 1), use default otherwise use bit bang */
+	if (!(eec & (1 << 8)))
+		hw->eeprom.ops.read = &ixgbe_read_eeprom_bit_bang_generic;
+
+	/* PHY */
+	memcpy(&hw->phy.ops, ii->phy_ops, sizeof(hw->phy.ops));
+	/* phy->sfp_type = ixgbe_sfp_type_unknown; */
+
 	err = ii->get_invariants(hw);
 	if (err)
 		goto err_hw_init;
@@ -3792,6 +3814,13 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	if (err)
 		goto err_sw_init;
 
+	/* reset_hw fills in the perm_addr as well */
+	err = hw->mac.ops.reset_hw(hw);
+	if (err) {
+		dev_err(&adapter->pdev->dev, "HW Init failed: %d\n", err);
+		goto err_sw_init;
+	}
+
 	netdev->features = NETIF_F_SG |
 			   NETIF_F_IP_CSUM |
 			   NETIF_F_HW_VLAN_TX |
@@ -3812,7 +3841,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 		netdev->features |= NETIF_F_HIGHDMA;
 
 	/* make sure the EEPROM is good */
-	if (ixgbe_validate_eeprom_checksum(hw, NULL) < 0) {
+	if (hw->eeprom.ops.validate_checksum(hw, NULL) < 0) {
 		dev_err(&pdev->dev, "The EEPROM Checksum Is Not Valid\n");
 		err = -EIO;
 		goto err_eeprom;
@@ -3821,7 +3850,8 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	memcpy(netdev->dev_addr, hw->mac.perm_addr, netdev->addr_len);
 	memcpy(netdev->perm_addr, hw->mac.perm_addr, netdev->addr_len);
 
-	if (ixgbe_validate_mac_addr(netdev->dev_addr)) {
+	if (ixgbe_validate_mac_addr(netdev->perm_addr)) {
+		dev_err(&pdev->dev, "invalid MAC address\n");
 		err = -EIO;
 		goto err_eeprom;
 	}
@@ -3853,7 +3883,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 		 "Unknown"),
 		netdev->dev_addr[0], netdev->dev_addr[1], netdev->dev_addr[2],
 		netdev->dev_addr[3], netdev->dev_addr[4], netdev->dev_addr[5]);
-	ixgbe_read_part_num(hw, &part_num);
+	ixgbe_read_pba_num_generic(hw, &part_num);
 	dev_info(&pdev->dev, "MAC: %d, PHY: %d, PBA No: %06x-%03x\n",
 		 hw->mac.type, hw->phy.type,
 		 (part_num >> 8), (part_num & 0xff));
@@ -3867,7 +3897,14 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	}
 
 	/* reset the hardware with the new settings */
-	ixgbe_start_hw(hw);
+	hw->mac.ops.start_hw(hw);
+
+	/* link_config depends on start_hw being called at least once */
+	err = ixgbe_link_config(hw);
+	if (err) {
+		dev_err(&pdev->dev, "setup_link_speed FAILED %d\n", err);
+		goto err_register;
+	}
 
 	netif_carrier_off(netdev);
 	netif_tx_stop_all_queues(netdev);