Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:
	arch/sparc64/kernel/idprom.c

3 files changed, 134 insertions, 114 deletions

diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index b37867097308..5e70180bf569 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -75,7 +75,7 @@
 #include "myri10ge_mcp.h"
 #include "myri10ge_mcp_gen_header.h"
 
-#define MYRI10GE_VERSION_STR "1.4.3-1.378"
+#define MYRI10GE_VERSION_STR "1.4.4-1.395"
 
 MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
 MODULE_AUTHOR("Maintainer: help@myri.com");
@@ -1024,7 +1024,7 @@ static int myri10ge_reset(struct myri10ge_priv *mgp)
 			ss->dca_tag = NULL;
 		}
 	}
-#endif				/* CONFIG_DCA */
+#endif				/* CONFIG_MYRI10GE_DCA */
 
 	/* reset mcp/driver shared state back to 0 */
 
@@ -1121,7 +1121,7 @@ static int myri10ge_notify_dca_device(struct device *dev, void *data)
 		myri10ge_teardown_dca(mgp);
 	return 0;
 }
-#endif				/* CONFIG_DCA */
+#endif				/* CONFIG_MYRI10GE_DCA */
 
 static inline void
 myri10ge_submit_8rx(struct mcp_kreq_ether_recv __iomem * dst,
@@ -1309,7 +1309,7 @@ myri10ge_rx_done(struct myri10ge_slice_state *ss, struct myri10ge_rx_buf *rx,
 
 	skb = netdev_alloc_skb(dev, MYRI10GE_HLEN + 16);
 	if (unlikely(skb == NULL)) {
-		mgp->stats.rx_dropped++;
+		ss->stats.rx_dropped++;
 		do {
 			i--;
 			put_page(rx_frags[i].page);
@@ -1334,7 +1334,6 @@ myri10ge_rx_done(struct myri10ge_slice_state *ss, struct myri10ge_rx_buf *rx,
 			myri10ge_vlan_ip_csum(skb, csum);
 	}
 	netif_receive_skb(skb);
-	dev->last_rx = jiffies;
 	return 1;
 }
 
@@ -1504,7 +1503,6 @@ static int myri10ge_poll(struct napi_struct *napi, int budget)
 {
 	struct myri10ge_slice_state *ss =
 	    container_of(napi, struct myri10ge_slice_state, napi);
-	struct net_device *netdev = ss->mgp->dev;
 	int work_done;
 
 #ifdef CONFIG_MYRI10GE_DCA
@@ -1516,7 +1514,7 @@ static int myri10ge_poll(struct napi_struct *napi, int budget)
 	work_done = myri10ge_clean_rx_done(ss, budget);
 
 	if (work_done < budget) {
-		netif_rx_complete(netdev, napi);
+		netif_rx_complete(napi);
 		put_be32(htonl(3), ss->irq_claim);
 	}
 	return work_done;
@@ -1534,7 +1532,7 @@ static irqreturn_t myri10ge_intr(int irq, void *arg)
 	/* an interrupt on a non-zero receive-only slice is implicitly
 	 * valid  since MSI-X irqs are not shared */
 	if ((mgp->dev->real_num_tx_queues == 1) && (ss != mgp->ss)) {
-		netif_rx_schedule(ss->dev, &ss->napi);
+		netif_rx_schedule(&ss->napi);
 		return (IRQ_HANDLED);
 	}
 
@@ -1545,7 +1543,7 @@ static irqreturn_t myri10ge_intr(int irq, void *arg)
 	/* low bit indicates receives are present, so schedule
 	 * napi poll handler */
 	if (stats->valid & 1)
-		netif_rx_schedule(ss->dev, &ss->napi);
+		netif_rx_schedule(&ss->napi);
 
 	if (!mgp->msi_enabled && !mgp->msix_enabled) {
 		put_be32(0, mgp->irq_deassert);
@@ -2230,6 +2228,8 @@ myri10ge_get_frag_header(struct skb_frag_struct *frag, void **mac_hdr,
 	*ip_hdr = iph;
 	if (iph->protocol != IPPROTO_TCP)
 		return -1;
+	if (iph->frag_off & htons(IP_MF | IP_OFFSET))
+		return -1;
 	*hdr_flags |= LRO_TCP;
 	*tcpudp_hdr = (u8 *) (*ip_hdr) + (iph->ihl << 2);
 
@@ -2927,6 +2927,7 @@ static int myri10ge_sw_tso(struct sk_buff *skb, struct net_device *dev)
 {
 	struct sk_buff *segs, *curr;
 	struct myri10ge_priv *mgp = netdev_priv(dev);
+	struct myri10ge_slice_state *ss;
 	int status;
 
 	segs = skb_gso_segment(skb, dev->features & ~NETIF_F_TSO6);
@@ -2953,8 +2954,9 @@ static int myri10ge_sw_tso(struct sk_buff *skb, struct net_device *dev)
 	return 0;
 
 drop:
+	ss = &mgp->ss[skb_get_queue_mapping(skb)];
 	dev_kfree_skb_any(skb);
-	mgp->stats.tx_dropped += 1;
+	ss->stats.tx_dropped += 1;
 	return 0;
 }
 
@@ -2985,7 +2987,6 @@ static void myri10ge_set_multicast_list(struct net_device *dev)
 	struct dev_mc_list *mc_list;
 	__be32 data[2] = { 0, 0 };
 	int err;
-	DECLARE_MAC_BUF(mac);
 
 	/* can be called from atomic contexts,
 	 * pass 1 to force atomicity in myri10ge_send_cmd() */
@@ -3032,8 +3033,7 @@ static void myri10ge_set_multicast_list(struct net_device *dev)
 			printk(KERN_ERR "myri10ge: %s: Failed "
 			       "MXGEFW_JOIN_MULTICAST_GROUP, error status:"
 			       "%d\t", dev->name, err);
-			printk(KERN_ERR "MAC %s\n",
-			       print_mac(mac, mc_list->dmi_addr));
+			printk(KERN_ERR "MAC %pM\n", mc_list->dmi_addr);
 			goto abort;
 		}
 	}
@@ -3732,6 +3732,17 @@ abort_with_fw:
 	myri10ge_load_firmware(mgp, 0);
 }
 
+static const struct net_device_ops myri10ge_netdev_ops = {
+	.ndo_open		= myri10ge_open,
+	.ndo_stop		= myri10ge_close,
+	.ndo_start_xmit		= myri10ge_xmit,
+	.ndo_get_stats		= myri10ge_get_stats,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_change_mtu		= myri10ge_change_mtu,
+	.ndo_set_multicast_list = myri10ge_set_multicast_list,
+	.ndo_set_mac_address	= myri10ge_set_mac_address,
+};
+
 static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
 	struct net_device *netdev;
@@ -3740,6 +3751,7 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	int i;
 	int status = -ENXIO;
 	int dac_enabled;
+	unsigned hdr_offset, ss_offset;
 
 	netdev = alloc_etherdev_mq(sizeof(*mgp), MYRI10GE_MAX_SLICES);
 	if (netdev == NULL) {
@@ -3807,14 +3819,6 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (mgp->mtrr >= 0)
 		mgp->wc_enabled = 1;
 #endif
-	/* Hack.  need to get rid of these magic numbers */
-	mgp->sram_size =
-	    2 * 1024 * 1024 - (2 * (48 * 1024) + (32 * 1024)) - 0x100;
-	if (mgp->sram_size > mgp->board_span) {
-		dev_err(&pdev->dev, "board span %ld bytes too small\n",
-			mgp->board_span);
-		goto abort_with_mtrr;
-	}
 	mgp->sram = ioremap_wc(mgp->iomem_base, mgp->board_span);
 	if (mgp->sram == NULL) {
 		dev_err(&pdev->dev, "ioremap failed for %ld bytes at 0x%lx\n",
@@ -3822,9 +3826,19 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		status = -ENXIO;
 		goto abort_with_mtrr;
 	}
+	hdr_offset =
+	    ntohl(__raw_readl(mgp->sram + MCP_HEADER_PTR_OFFSET)) & 0xffffc;
+	ss_offset = hdr_offset + offsetof(struct mcp_gen_header, string_specs);
+	mgp->sram_size = ntohl(__raw_readl(mgp->sram + ss_offset));
+	if (mgp->sram_size > mgp->board_span ||
+	    mgp->sram_size <= MYRI10GE_FW_OFFSET) {
+		dev_err(&pdev->dev,
+			"invalid sram_size %dB or board span %ldB\n",
+			mgp->sram_size, mgp->board_span);
+		goto abort_with_ioremap;
+	}
 	memcpy_fromio(mgp->eeprom_strings,
-		      mgp->sram + mgp->sram_size - MYRI10GE_EEPROM_STRINGS_SIZE,
-		      MYRI10GE_EEPROM_STRINGS_SIZE);
+		      mgp->sram + mgp->sram_size, MYRI10GE_EEPROM_STRINGS_SIZE);
 	memset(mgp->eeprom_strings + MYRI10GE_EEPROM_STRINGS_SIZE - 2, 0, 2);
 	status = myri10ge_read_mac_addr(mgp);
 	if (status)
@@ -3860,15 +3874,10 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		myri10ge_initial_mtu = MYRI10GE_MAX_ETHER_MTU - ETH_HLEN;
 	if ((myri10ge_initial_mtu + ETH_HLEN) < 68)
 		myri10ge_initial_mtu = 68;
+
+	netdev->netdev_ops = &myri10ge_netdev_ops;
 	netdev->mtu = myri10ge_initial_mtu;
-	netdev->open = myri10ge_open;
-	netdev->stop = myri10ge_close;
-	netdev->hard_start_xmit = myri10ge_xmit;
-	netdev->get_stats = myri10ge_get_stats;
 	netdev->base_addr = mgp->iomem_base;
-	netdev->change_mtu = myri10ge_change_mtu;
-	netdev->set_multicast_list = myri10ge_set_multicast_list;
-	netdev->set_mac_address = myri10ge_set_mac_address;
 	netdev->features = mgp->features;
 
 	if (dac_enabled)
@@ -4019,7 +4028,7 @@ static struct notifier_block myri10ge_dca_notifier = {
 	.next = NULL,
 	.priority = 0,
 };
-#endif				/* CONFIG_DCA */
+#endif				/* CONFIG_MYRI10GE_DCA */
 
 static __init int myri10ge_init_module(void)
 {
diff --git a/drivers/net/myri10ge/myri10ge_mcp.h b/drivers/net/myri10ge/myri10ge_mcp.h
index 993721090777..11be150e4d67 100644
--- a/drivers/net/myri10ge/myri10ge_mcp.h
+++ b/drivers/net/myri10ge/myri10ge_mcp.h
@@ -111,61 +111,61 @@ enum myri10ge_mcp_cmd_type {
 	MXGEFW_CMD_NONE = 0,
 	/* Reset the mcp, it is left in a safe state, waiting
 	 * for the driver to set all its parameters */
-	MXGEFW_CMD_RESET,
+	MXGEFW_CMD_RESET = 1,
 
 	/* get the version number of the current firmware..
 	 * (may be available in the eeprom strings..? */
-	MXGEFW_GET_MCP_VERSION,
+	MXGEFW_GET_MCP_VERSION = 2,
 
 	/* Parameters which must be set by the driver before it can
 	 * issue MXGEFW_CMD_ETHERNET_UP. They persist until the next
 	 * MXGEFW_CMD_RESET is issued */
 
-	MXGEFW_CMD_SET_INTRQ_DMA,
+	MXGEFW_CMD_SET_INTRQ_DMA = 3,
 	/* data0 = LSW of the host address
 	 * data1 = MSW of the host address
 	 * data2 = slice number if multiple slices are used
 	 */
 
-	MXGEFW_CMD_SET_BIG_BUFFER_SIZE,	/* in bytes, power of 2 */
-	MXGEFW_CMD_SET_SMALL_BUFFER_SIZE,	/* in bytes */
+	MXGEFW_CMD_SET_BIG_BUFFER_SIZE = 4,	/* in bytes, power of 2 */
+	MXGEFW_CMD_SET_SMALL_BUFFER_SIZE = 5,	/* in bytes */
 
 	/* Parameters which refer to lanai SRAM addresses where the
 	 * driver must issue PIO writes for various things */
 
-	MXGEFW_CMD_GET_SEND_OFFSET,
-	MXGEFW_CMD_GET_SMALL_RX_OFFSET,
-	MXGEFW_CMD_GET_BIG_RX_OFFSET,
+	MXGEFW_CMD_GET_SEND_OFFSET = 6,
+	MXGEFW_CMD_GET_SMALL_RX_OFFSET = 7,
+	MXGEFW_CMD_GET_BIG_RX_OFFSET = 8,
 	/* data0 = slice number if multiple slices are used */
 
-	MXGEFW_CMD_GET_IRQ_ACK_OFFSET,
-	MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET,
+	MXGEFW_CMD_GET_IRQ_ACK_OFFSET = 9,
+	MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET = 10,
 
 	/* Parameters which refer to rings stored on the MCP,
 	 * and whose size is controlled by the mcp */
 
-	MXGEFW_CMD_GET_SEND_RING_SIZE,	/* in bytes */
-	MXGEFW_CMD_GET_RX_RING_SIZE,	/* in bytes */
+	MXGEFW_CMD_GET_SEND_RING_SIZE = 11,	/* in bytes */
+	MXGEFW_CMD_GET_RX_RING_SIZE = 12,	/* in bytes */
 
 	/* Parameters which refer to rings stored in the host,
 	 * and whose size is controlled by the host.  Note that
 	 * all must be physically contiguous and must contain
 	 * a power of 2 number of entries.  */
 
-	MXGEFW_CMD_SET_INTRQ_SIZE,	/* in bytes */
+	MXGEFW_CMD_SET_INTRQ_SIZE = 13,	/* in bytes */
 #define MXGEFW_CMD_SET_INTRQ_SIZE_FLAG_NO_STRICT_SIZE_CHECK  (1 << 31)
 
 	/* command to bring ethernet interface up.  Above parameters
 	 * (plus mtu & mac address) must have been exchanged prior
 	 * to issuing this command  */
-	MXGEFW_CMD_ETHERNET_UP,
+	MXGEFW_CMD_ETHERNET_UP = 14,
 
 	/* command to bring ethernet interface down.  No further sends
 	 * or receives may be processed until an MXGEFW_CMD_ETHERNET_UP
 	 * is issued, and all interrupt queues must be flushed prior
 	 * to ack'ing this command */
 
-	MXGEFW_CMD_ETHERNET_DOWN,
+	MXGEFW_CMD_ETHERNET_DOWN = 15,
 
 	/* commands the driver may issue live, without resetting
 	 * the nic.  Note that increasing the mtu "live" should
@@ -173,40 +173,40 @@ enum myri10ge_mcp_cmd_type {
 	 * sufficiently large to handle the new mtu.  Decreasing
 	 * the mtu live is safe */
 
-	MXGEFW_CMD_SET_MTU,
-	MXGEFW_CMD_GET_INTR_COAL_DELAY_OFFSET,	/* in microseconds */
-	MXGEFW_CMD_SET_STATS_INTERVAL,	/* in microseconds */
-	MXGEFW_CMD_SET_STATS_DMA_OBSOLETE,	/* replaced by SET_STATS_DMA_V2 */
+	MXGEFW_CMD_SET_MTU = 16,
+	MXGEFW_CMD_GET_INTR_COAL_DELAY_OFFSET = 17,	/* in microseconds */
+	MXGEFW_CMD_SET_STATS_INTERVAL = 18,	/* in microseconds */
+	MXGEFW_CMD_SET_STATS_DMA_OBSOLETE = 19,	/* replaced by SET_STATS_DMA_V2 */
 
-	MXGEFW_ENABLE_PROMISC,
-	MXGEFW_DISABLE_PROMISC,
-	MXGEFW_SET_MAC_ADDRESS,
+	MXGEFW_ENABLE_PROMISC = 20,
+	MXGEFW_DISABLE_PROMISC = 21,
+	MXGEFW_SET_MAC_ADDRESS = 22,
 
-	MXGEFW_ENABLE_FLOW_CONTROL,
-	MXGEFW_DISABLE_FLOW_CONTROL,
+	MXGEFW_ENABLE_FLOW_CONTROL = 23,
+	MXGEFW_DISABLE_FLOW_CONTROL = 24,
 
 	/* do a DMA test
 	 * data0,data1 = DMA address
 	 * data2       = RDMA length (MSH), WDMA length (LSH)
 	 * command return data = repetitions (MSH), 0.5-ms ticks (LSH)
 	 */
-	MXGEFW_DMA_TEST,
+	MXGEFW_DMA_TEST = 25,
 
-	MXGEFW_ENABLE_ALLMULTI,
-	MXGEFW_DISABLE_ALLMULTI,
+	MXGEFW_ENABLE_ALLMULTI = 26,
+	MXGEFW_DISABLE_ALLMULTI = 27,
 
 	/* returns MXGEFW_CMD_ERROR_MULTICAST
 	 * if there is no room in the cache
 	 * data0,MSH(data1) = multicast group address */
-	MXGEFW_JOIN_MULTICAST_GROUP,
+	MXGEFW_JOIN_MULTICAST_GROUP = 28,
 	/* returns MXGEFW_CMD_ERROR_MULTICAST
 	 * if the address is not in the cache,
 	 * or is equal to FF-FF-FF-FF-FF-FF
 	 * data0,MSH(data1) = multicast group address */
-	MXGEFW_LEAVE_MULTICAST_GROUP,
-	MXGEFW_LEAVE_ALL_MULTICAST_GROUPS,
+	MXGEFW_LEAVE_MULTICAST_GROUP = 29,
+	MXGEFW_LEAVE_ALL_MULTICAST_GROUPS = 30,
 
-	MXGEFW_CMD_SET_STATS_DMA_V2,
+	MXGEFW_CMD_SET_STATS_DMA_V2 = 31,
 	/* data0, data1 = bus addr,
 	 * data2 = sizeof(struct mcp_irq_data) from driver point of view, allows
 	 * adding new stuff to mcp_irq_data without changing the ABI
@@ -216,14 +216,14 @@ enum myri10ge_mcp_cmd_type {
 	 * (in the upper 16 bits).
 	 */
 
-	MXGEFW_CMD_UNALIGNED_TEST,
+	MXGEFW_CMD_UNALIGNED_TEST = 32,
 	/* same than DMA_TEST (same args) but abort with UNALIGNED on unaligned
 	 * chipset */
 
-	MXGEFW_CMD_UNALIGNED_STATUS,
+	MXGEFW_CMD_UNALIGNED_STATUS = 33,
 	/* return data = boolean, true if the chipset is known to be unaligned */
 
-	MXGEFW_CMD_ALWAYS_USE_N_BIG_BUFFERS,
+	MXGEFW_CMD_ALWAYS_USE_N_BIG_BUFFERS = 34,
 	/* data0 = number of big buffers to use.  It must be 0 or a power of 2.
 	 * 0 indicates that the NIC consumes as many buffers as they are required
 	 * for packet. This is the default behavior.
@@ -233,8 +233,8 @@ enum myri10ge_mcp_cmd_type {
 	 * the NIC to be able to receive maximum-sized packets.
 	 */
 
-	MXGEFW_CMD_GET_MAX_RSS_QUEUES,
-	MXGEFW_CMD_ENABLE_RSS_QUEUES,
+	MXGEFW_CMD_GET_MAX_RSS_QUEUES = 35,
+	MXGEFW_CMD_ENABLE_RSS_QUEUES = 36,
 	/* data0 = number of slices n (0, 1, ..., n-1) to enable
 	 * data1 = interrupt mode | use of multiple transmit queues.
 	 * 0=share one INTx/MSI.
@@ -249,18 +249,18 @@ enum myri10ge_mcp_cmd_type {
 #define MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE   0x1
 #define MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES 0x2
 
-	MXGEFW_CMD_GET_RSS_SHARED_INTERRUPT_MASK_OFFSET,
-	MXGEFW_CMD_SET_RSS_SHARED_INTERRUPT_DMA,
+	MXGEFW_CMD_GET_RSS_SHARED_INTERRUPT_MASK_OFFSET = 37,
+	MXGEFW_CMD_SET_RSS_SHARED_INTERRUPT_DMA = 38,
 	/* data0, data1 = bus address lsw, msw */
-	MXGEFW_CMD_GET_RSS_TABLE_OFFSET,
+	MXGEFW_CMD_GET_RSS_TABLE_OFFSET = 39,
 	/* get the offset of the indirection table */
-	MXGEFW_CMD_SET_RSS_TABLE_SIZE,
+	MXGEFW_CMD_SET_RSS_TABLE_SIZE = 40,
 	/* set the size of the indirection table */
-	MXGEFW_CMD_GET_RSS_KEY_OFFSET,
+	MXGEFW_CMD_GET_RSS_KEY_OFFSET = 41,
 	/* get the offset of the secret key */
-	MXGEFW_CMD_RSS_KEY_UPDATED,
+	MXGEFW_CMD_RSS_KEY_UPDATED = 42,
 	/* tell nic that the secret key's been updated */
-	MXGEFW_CMD_SET_RSS_ENABLE,
+	MXGEFW_CMD_SET_RSS_ENABLE = 43,
 	/* data0 = enable/disable rss
 	 * 0: disable rss.  nic does not distribute receive packets.
 	 * 1: enable rss.  nic distributes receive packets among queues.
@@ -277,7 +277,7 @@ enum myri10ge_mcp_cmd_type {
 #define MXGEFW_RSS_HASH_TYPE_SRC_DST_PORT 0x5
 #define MXGEFW_RSS_HASH_TYPE_MAX 0x5
 
-	MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE,
+	MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE = 44,
 	/* Return data = the max. size of the entire headers of a IPv6 TSO packet.
 	 * If the header size of a IPv6 TSO packet is larger than the specified
 	 * value, then the driver must not use TSO.
@@ -286,7 +286,7 @@ enum myri10ge_mcp_cmd_type {
 	 * always has enough header buffer to store maximum-sized headers.
 	 */
 
-	MXGEFW_CMD_SET_TSO_MODE,
+	MXGEFW_CMD_SET_TSO_MODE = 45,
 	/* data0 = TSO mode.
 	 * 0: Linux/FreeBSD style (NIC default)
 	 * 1: NDIS/NetBSD style
@@ -294,33 +294,37 @@ enum myri10ge_mcp_cmd_type {
 #define MXGEFW_TSO_MODE_LINUX  0
 #define MXGEFW_TSO_MODE_NDIS   1
 
-	MXGEFW_CMD_MDIO_READ,
+	MXGEFW_CMD_MDIO_READ = 46,
 	/* data0 = dev_addr (PMA/PMD or PCS ...), data1 = register/addr */
-	MXGEFW_CMD_MDIO_WRITE,
+	MXGEFW_CMD_MDIO_WRITE = 47,
 	/* data0 = dev_addr,  data1 = register/addr, data2 = value  */
 
-	MXGEFW_CMD_XFP_I2C_READ,
-	/* Starts to get a fresh copy of one byte or of the whole xfp i2c table, the
+	MXGEFW_CMD_I2C_READ = 48,
+	/* Starts to get a fresh copy of one byte or of the module i2c table, the
 	 * obtained data is cached inside the xaui-xfi chip :
-	 *   data0 : "all" flag : 0 => get one byte, 1=> get 256 bytes,
-	 *   data1 : if (data0 == 0): index of byte to refresh [ not used otherwise ]
+	 *   data0 :  0 => get one byte, 1=> get 256 bytes
+	 *   data1 :  If data0 == 0: location to refresh
+	 *               bit 7:0  register location
+	 *               bit 8:15 is the i2c slave addr (0 is interpreted as 0xA1)
+	 *               bit 23:16 is the i2c bus number (for multi-port NICs)
+	 *            If data0 == 1: unused
 	 * The operation might take ~1ms for a single byte or ~65ms when refreshing all 256 bytes
-	 * During the i2c operation,  MXGEFW_CMD_XFP_I2C_READ or MXGEFW_CMD_XFP_BYTE attempts
+	 * During the i2c operation,  MXGEFW_CMD_I2C_READ or MXGEFW_CMD_I2C_BYTE attempts
 	 *  will return MXGEFW_CMD_ERROR_BUSY
 	 */
-	MXGEFW_CMD_XFP_BYTE,
+	MXGEFW_CMD_I2C_BYTE = 49,
 	/* Return the last obtained copy of a given byte in the xfp i2c table
-	 * (copy cached during the last relevant MXGEFW_CMD_XFP_I2C_READ)
+	 * (copy cached during the last relevant MXGEFW_CMD_I2C_READ)
 	 *   data0 : index of the desired table entry
 	 *  Return data = the byte stored at the requested index in the table
 	 */
 
-	MXGEFW_CMD_GET_VPUMP_OFFSET,
+	MXGEFW_CMD_GET_VPUMP_OFFSET = 50,
 	/* Return data = NIC memory offset of mcp_vpump_public_global */
-	MXGEFW_CMD_RESET_VPUMP,
+	MXGEFW_CMD_RESET_VPUMP = 51,
 	/* Resets the VPUMP state */
 
-	MXGEFW_CMD_SET_RSS_MCP_SLOT_TYPE,
+	MXGEFW_CMD_SET_RSS_MCP_SLOT_TYPE = 52,
 	/* data0 = mcp_slot type to use.
 	 * 0 = the default 4B mcp_slot
 	 * 1 = 8B mcp_slot_8
@@ -328,7 +332,7 @@ enum myri10ge_mcp_cmd_type {
 #define MXGEFW_RSS_MCP_SLOT_TYPE_MIN        0
 #define MXGEFW_RSS_MCP_SLOT_TYPE_WITH_HASH  1
 
-	MXGEFW_CMD_SET_THROTTLE_FACTOR,
+	MXGEFW_CMD_SET_THROTTLE_FACTOR = 53,
 	/* set the throttle factor for ethp_z8e
 	 * data0 = throttle_factor
 	 * throttle_factor = 256 * pcie-raw-speed / tx_speed
@@ -344,45 +348,50 @@ enum myri10ge_mcp_cmd_type {
 	 * with tx_boundary == 4096, max-throttle-factor == 4095 => min-speed == 1Gb/s
 	 */
 
-	MXGEFW_CMD_VPUMP_UP,
+	MXGEFW_CMD_VPUMP_UP = 54,
 	/* Allocates VPump Connection, Send Request and Zero copy buffer address tables */
-	MXGEFW_CMD_GET_VPUMP_CLK,
+	MXGEFW_CMD_GET_VPUMP_CLK = 55,
 	/* Get the lanai clock */
 
-	MXGEFW_CMD_GET_DCA_OFFSET,
+	MXGEFW_CMD_GET_DCA_OFFSET = 56,
 	/* offset of dca control for WDMAs */
 
 	/* VMWare NetQueue commands */
-	MXGEFW_CMD_NETQ_GET_FILTERS_PER_QUEUE,
-	MXGEFW_CMD_NETQ_ADD_FILTER,
+	MXGEFW_CMD_NETQ_GET_FILTERS_PER_QUEUE = 57,
+	MXGEFW_CMD_NETQ_ADD_FILTER = 58,
 	/* data0 = filter_id << 16 | queue << 8 | type */
 	/* data1 = MS4 of MAC Addr */
 	/* data2 = LS2_MAC << 16 | VLAN_tag */
-	MXGEFW_CMD_NETQ_DEL_FILTER,
+	MXGEFW_CMD_NETQ_DEL_FILTER = 59,
 	/* data0 = filter_id */
-	MXGEFW_CMD_NETQ_QUERY1,
-	MXGEFW_CMD_NETQ_QUERY2,
-	MXGEFW_CMD_NETQ_QUERY3,
-	MXGEFW_CMD_NETQ_QUERY4,
-
+	MXGEFW_CMD_NETQ_QUERY1 = 60,
+	MXGEFW_CMD_NETQ_QUERY2 = 61,
+	MXGEFW_CMD_NETQ_QUERY3 = 62,
+	MXGEFW_CMD_NETQ_QUERY4 = 63,
+
+	MXGEFW_CMD_RELAX_RXBUFFER_ALIGNMENT = 64,
+	/* When set, small receive buffers can cross page boundaries.
+	 * Both small and big receive buffers may start at any address.
+	 * This option has performance implications, so use with caution.
+	 */
 };
 
 enum myri10ge_mcp_cmd_status {
 	MXGEFW_CMD_OK = 0,
-	MXGEFW_CMD_UNKNOWN,
-	MXGEFW_CMD_ERROR_RANGE,
-	MXGEFW_CMD_ERROR_BUSY,
-	MXGEFW_CMD_ERROR_EMPTY,
-	MXGEFW_CMD_ERROR_CLOSED,
-	MXGEFW_CMD_ERROR_HASH_ERROR,
-	MXGEFW_CMD_ERROR_BAD_PORT,
-	MXGEFW_CMD_ERROR_RESOURCES,
-	MXGEFW_CMD_ERROR_MULTICAST,
-	MXGEFW_CMD_ERROR_UNALIGNED,
-	MXGEFW_CMD_ERROR_NO_MDIO,
-	MXGEFW_CMD_ERROR_XFP_FAILURE,
-	MXGEFW_CMD_ERROR_XFP_ABSENT,
-	MXGEFW_CMD_ERROR_BAD_PCIE_LINK
+	MXGEFW_CMD_UNKNOWN = 1,
+	MXGEFW_CMD_ERROR_RANGE = 2,
+	MXGEFW_CMD_ERROR_BUSY = 3,
+	MXGEFW_CMD_ERROR_EMPTY = 4,
+	MXGEFW_CMD_ERROR_CLOSED = 5,
+	MXGEFW_CMD_ERROR_HASH_ERROR = 6,
+	MXGEFW_CMD_ERROR_BAD_PORT = 7,
+	MXGEFW_CMD_ERROR_RESOURCES = 8,
+	MXGEFW_CMD_ERROR_MULTICAST = 9,
+	MXGEFW_CMD_ERROR_UNALIGNED = 10,
+	MXGEFW_CMD_ERROR_NO_MDIO = 11,
+	MXGEFW_CMD_ERROR_I2C_FAILURE = 12,
+	MXGEFW_CMD_ERROR_I2C_ABSENT = 13,
+	MXGEFW_CMD_ERROR_BAD_PCIE_LINK = 14
 };
 
 #define MXGEFW_OLD_IRQ_DATA_LEN 40
diff --git a/drivers/net/myri10ge/myri10ge_mcp_gen_header.h b/drivers/net/myri10ge/myri10ge_mcp_gen_header.h
index a8662ea8079a..caa6cbbb631e 100644
--- a/drivers/net/myri10ge/myri10ge_mcp_gen_header.h
+++ b/drivers/net/myri10ge/myri10ge_mcp_gen_header.h
@@ -41,6 +41,8 @@ struct mcp_gen_header {
 	unsigned short handoff_id_major;	/* must be equal */
 	unsigned short handoff_id_caps;	/* bitfield: new mcp must have superset */
 	unsigned msix_table_addr;	/* start address of msix table in firmware */
+	unsigned bss_addr;	/* start of bss */
+	unsigned features;
 	/* 8 */
 };