8390: Move the 8390 related drivers

Moves the drivers for the National Semi-conductor 8390 chipset into
drivers/net/ethernet/8390/ and the necessary Kconfig and Makefile
changes.

CC: Donald Becker <becker@scyld.com>
CC: Paul Gortmaker <paul.gortmaker@windriver.com>
CC: Alain Malek <alain.malek@cryogen.com>
CC: Peter De Schrijver <p2@mind.be>
CC: "David Huggins-Daines" <dhd@debian.org>
CC: Wim Dumon <wimpie@kotnet.org>
CC: Yoshinori Sato <ysato@users.sourceforge.jp>
CC: David Hinds <dahinds@users.sourceforge.net>
CC: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 0 insertions, 347 deletions

diff --git a/drivers/net/ne3210.c b/drivers/net/ne3210.c
deleted file mode 100644
index 243ed2aee88e..000000000000
--- a/drivers/net/ne3210.c
+++ /dev/null
@@ -1,347 +0,0 @@
-/*
-	ne3210.c
-
-	Linux driver for Novell NE3210 EISA Network Adapter
-
-	Copyright (C) 1998, Paul Gortmaker.
-
-	This software may be used and distributed according to the terms
-	of the GNU General Public License, incorporated herein by reference.
-
-	Information and Code Sources:
-
-	1) Based upon my other EISA 8390 drivers (lne390, es3210, smc-ultra32)
-	2) The existing myriad of other Linux 8390 drivers by Donald Becker.
-	3) Info for getting IRQ and sh-mem gleaned from the EISA cfg file
-
-	The NE3210 is an EISA shared memory NS8390 implementation.  Shared
-	memory address > 1MB should work with this driver.
-
-	Note that the .cfg file (3/11/93, v1.0) has AUI and BNC switched
-	around (or perhaps there are some defective/backwards cards ???)
-
-	This driver WILL NOT WORK FOR THE NE3200 - it is completely different
-	and does not use an 8390 at all.
-
-	Updated to EISA probing API 5/2003 by Marc Zyngier.
-*/
-
-#include <linux/module.h>
-#include <linux/eisa.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/mm.h>
-
-#include <asm/io.h>
-#include <asm/system.h>
-
-#include "8390.h"
-
-#define DRV_NAME "ne3210"
-
-static void ne3210_reset_8390(struct net_device *dev);
-
-static void ne3210_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page);
-static void ne3210_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset);
-static void ne3210_block_output(struct net_device *dev, int count, const unsigned char *buf, const int start_page);
-
-#define NE3210_START_PG		0x00    /* First page of TX buffer	*/
-#define NE3210_STOP_PG		0x80    /* Last page +1 of RX ring	*/
-
-#define NE3210_IO_EXTENT	0x20
-#define NE3210_SA_PROM		0x16	/* Start of e'net addr.		*/
-#define NE3210_RESET_PORT	0xc84
-#define NE3210_NIC_OFFSET	0x00	/* Hello, the 8390 is *here*	*/
-
-#define NE3210_ADDR0		0x00	/* 3 byte vendor prefix		*/
-#define NE3210_ADDR1		0x00
-#define NE3210_ADDR2		0x1b
-
-#define NE3210_CFG1		0xc84	/* NB: 0xc84 is also "reset" port. */
-#define NE3210_CFG2		0xc90
-#define NE3210_CFG_EXTENT       (NE3210_CFG2 - NE3210_CFG1 + 1)
-
-/*
- *	You can OR any of the following bits together and assign it
- *	to NE3210_DEBUG to get verbose driver info during operation.
- *	Currently only the probe one is implemented.
- */
-
-#define NE3210_D_PROBE	0x01
-#define NE3210_D_RX_PKT	0x02
-#define NE3210_D_TX_PKT	0x04
-#define NE3210_D_IRQ	0x08
-
-#define NE3210_DEBUG	0x0
-
-static unsigned char irq_map[] __initdata = {15, 12, 11, 10, 9, 7, 5, 3};
-static unsigned int shmem_map[] __initdata = {0xff0, 0xfe0, 0xfff0, 0xd8, 0xffe0, 0xffc0, 0xd0, 0x0};
-static const char *ifmap[] __initdata = {"UTP", "?", "BNC", "AUI"};
-static int ifmap_val[] __initdata = {
-		IF_PORT_10BASET,
-		IF_PORT_UNKNOWN,
-		IF_PORT_10BASE2,
-		IF_PORT_AUI,
-};
-
-static int __init ne3210_eisa_probe (struct device *device)
-{
-	unsigned long ioaddr, phys_mem;
-	int i, retval, port_index;
-	struct eisa_device *edev = to_eisa_device (device);
-	struct net_device *dev;
-
-	/* Allocate dev->priv and fill in 8390 specific dev fields. */
-	if (!(dev = alloc_ei_netdev ())) {
-		printk ("ne3210.c: unable to allocate memory for dev!\n");
-		return -ENOMEM;
-	}
-
-	SET_NETDEV_DEV(dev, device);
-	dev_set_drvdata(device, dev);
-	ioaddr = edev->base_addr;
-
-	if (!request_region(ioaddr, NE3210_IO_EXTENT, DRV_NAME)) {
-		retval = -EBUSY;
-		goto out;
-	}
-
-	if (!request_region(ioaddr + NE3210_CFG1,
-			    NE3210_CFG_EXTENT, DRV_NAME)) {
-		retval = -EBUSY;
-		goto out1;
-	}
-
-#if NE3210_DEBUG & NE3210_D_PROBE
-	printk("ne3210-debug: probe at %#x, ID %s\n", ioaddr, edev->id.sig);
-	printk("ne3210-debug: config regs: %#x %#x\n",
-		inb(ioaddr + NE3210_CFG1), inb(ioaddr + NE3210_CFG2));
-#endif
-
-	port_index = inb(ioaddr + NE3210_CFG2) >> 6;
-	for(i = 0; i < ETHER_ADDR_LEN; i++)
-		dev->dev_addr[i] = inb(ioaddr + NE3210_SA_PROM + i);
-	printk("ne3210.c: NE3210 in EISA slot %d, media: %s, addr: %pM.\n",
-		edev->slot, ifmap[port_index], dev->dev_addr);
-
-	/* Snarf the interrupt now. CFG file has them all listed as `edge' with share=NO */
-	dev->irq = irq_map[(inb(ioaddr + NE3210_CFG2) >> 3) & 0x07];
-	printk("ne3210.c: using IRQ %d, ", dev->irq);
-
-	retval = request_irq(dev->irq, ei_interrupt, 0, DRV_NAME, dev);
-	if (retval) {
-		printk (" unable to get IRQ %d.\n", dev->irq);
-		goto out2;
-	}
-
-	phys_mem = shmem_map[inb(ioaddr + NE3210_CFG2) & 0x07] * 0x1000;
-
-	/*
-	   BEWARE!! Some dain-bramaged EISA SCUs will allow you to put
-	   the card mem within the region covered by `normal' RAM  !!!
-	*/
-	if (phys_mem > 1024*1024) {	/* phys addr > 1MB */
-		if (phys_mem < virt_to_phys(high_memory)) {
-			printk(KERN_CRIT "ne3210.c: Card RAM overlaps with normal memory!!!\n");
-			printk(KERN_CRIT "ne3210.c: Use EISA SCU to set card memory below 1MB,\n");
-			printk(KERN_CRIT "ne3210.c: or to an address above 0x%llx.\n",
-				(u64)virt_to_phys(high_memory));
-			printk(KERN_CRIT "ne3210.c: Driver NOT installed.\n");
-			retval = -EINVAL;
-			goto out3;
-		}
-	}
-
-	if (!request_mem_region (phys_mem, NE3210_STOP_PG*0x100, DRV_NAME)) {
-		printk ("ne3210.c: Unable to request shared memory at physical address %#lx\n",
-			phys_mem);
-		goto out3;
-	}
-
-	printk("%dkB memory at physical address %#lx\n",
-	       NE3210_STOP_PG/4, phys_mem);
-
-	ei_status.mem = ioremap(phys_mem, NE3210_STOP_PG*0x100);
-	if (!ei_status.mem) {
-		printk(KERN_ERR "ne3210.c: Unable to remap card memory !!\n");
-		printk(KERN_ERR "ne3210.c: Driver NOT installed.\n");
-		retval = -EAGAIN;
-		goto out4;
-	}
-	printk("ne3210.c: remapped %dkB card memory to virtual address %p\n",
-	       NE3210_STOP_PG/4, ei_status.mem);
-	dev->mem_start = (unsigned long)ei_status.mem;
-	dev->mem_end = dev->mem_start + (NE3210_STOP_PG - NE3210_START_PG)*256;
-
-	/* The 8390 offset is zero for the NE3210 */
-	dev->base_addr = ioaddr;
-
-	ei_status.name = "NE3210";
-	ei_status.tx_start_page = NE3210_START_PG;
-	ei_status.rx_start_page = NE3210_START_PG + TX_PAGES;
-	ei_status.stop_page = NE3210_STOP_PG;
-	ei_status.word16 = 1;
-	ei_status.priv = phys_mem;
-
-	if (ei_debug > 0)
-		printk("ne3210 loaded.\n");
-
-	ei_status.reset_8390 = &ne3210_reset_8390;
-	ei_status.block_input = &ne3210_block_input;
-	ei_status.block_output = &ne3210_block_output;
-	ei_status.get_8390_hdr = &ne3210_get_8390_hdr;
-
-	dev->netdev_ops = &ei_netdev_ops;
-
-	dev->if_port = ifmap_val[port_index];
-
-	if ((retval = register_netdev (dev)))
-		goto out5;
-
-	NS8390_init(dev, 0);
-	return 0;
-
- out5:
-	iounmap(ei_status.mem);
- out4:
-	release_mem_region (phys_mem, NE3210_STOP_PG*0x100);
- out3:
-	free_irq (dev->irq, dev);
- out2:
-	release_region (ioaddr + NE3210_CFG1, NE3210_CFG_EXTENT);
- out1:
-	release_region (ioaddr, NE3210_IO_EXTENT);
- out:
-	free_netdev (dev);
-
-	return retval;
-}
-
-static int __devexit ne3210_eisa_remove (struct device *device)
-{
-	struct net_device  *dev    = dev_get_drvdata(device);
-	unsigned long       ioaddr = to_eisa_device (device)->base_addr;
-
-	unregister_netdev (dev);
-	iounmap(ei_status.mem);
-	release_mem_region (ei_status.priv, NE3210_STOP_PG*0x100);
-	free_irq (dev->irq, dev);
-	release_region (ioaddr + NE3210_CFG1, NE3210_CFG_EXTENT);
-	release_region (ioaddr, NE3210_IO_EXTENT);
-	free_netdev (dev);
-
-	return 0;
-}
-
-/*
- *	Reset by toggling the "Board Enable" bits (bit 2 and 0).
- */
-
-static void ne3210_reset_8390(struct net_device *dev)
-{
-	unsigned short ioaddr = dev->base_addr;
-
-	outb(0x04, ioaddr + NE3210_RESET_PORT);
-	if (ei_debug > 1) printk("%s: resetting the NE3210...", dev->name);
-
-	mdelay(2);
-
-	ei_status.txing = 0;
-	outb(0x01, ioaddr + NE3210_RESET_PORT);
-	if (ei_debug > 1) printk("reset done\n");
-}
-
-/*
- *	Note: In the following three functions is the implicit assumption
- *	that the associated memcpy will only use "rep; movsl" as long as
- *	we keep the counts as some multiple of doublewords. This is a
- *	requirement of the hardware, and also prevents us from using
- *	eth_io_copy_and_sum() since we can't guarantee it will limit
- *	itself to doubleword access.
- */
-
-/*
- *	Grab the 8390 specific header. Similar to the block_input routine, but
- *	we don't need to be concerned with ring wrap as the header will be at
- *	the start of a page, so we optimize accordingly. (A single doubleword.)
- */
-
-static void
-ne3210_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
-{
-	void __iomem *hdr_start = ei_status.mem + ((ring_page - NE3210_START_PG)<<8);
-	memcpy_fromio(hdr, hdr_start, sizeof(struct e8390_pkt_hdr));
-	hdr->count = (hdr->count + 3) & ~3;     /* Round up allocation. */
-}
-
-/*
- *	Block input and output are easy on shared memory ethercards, the only
- *	complication is when the ring buffer wraps. The count will already
- *	be rounded up to a doubleword value via ne3210_get_8390_hdr() above.
- */
-
-static void ne3210_block_input(struct net_device *dev, int count, struct sk_buff *skb,
-						  int ring_offset)
-{
-	void __iomem *start = ei_status.mem + ring_offset - NE3210_START_PG*256;
-
-	if (ring_offset + count > NE3210_STOP_PG*256) {
-		/* Packet wraps over end of ring buffer. */
-		int semi_count = NE3210_STOP_PG*256 - ring_offset;
-		memcpy_fromio(skb->data, start, semi_count);
-		count -= semi_count;
-		memcpy_fromio(skb->data + semi_count,
-				ei_status.mem + TX_PAGES*256, count);
-	} else {
-		/* Packet is in one chunk. */
-		memcpy_fromio(skb->data, start, count);
-	}
-}
-
-static void ne3210_block_output(struct net_device *dev, int count,
-				const unsigned char *buf, int start_page)
-{
-	void __iomem *shmem = ei_status.mem + ((start_page - NE3210_START_PG)<<8);
-
-	count = (count + 3) & ~3;     /* Round up to doubleword */
-	memcpy_toio(shmem, buf, count);
-}
-
-static struct eisa_device_id ne3210_ids[] = {
-	{ "EGL0101" },
-	{ "NVL1801" },
-	{ "" },
-};
-MODULE_DEVICE_TABLE(eisa, ne3210_ids);
-
-static struct eisa_driver ne3210_eisa_driver = {
-	.id_table = ne3210_ids,
-	.driver   = {
-		.name   = "ne3210",
-		.probe  = ne3210_eisa_probe,
-		.remove = __devexit_p (ne3210_eisa_remove),
-	},
-};
-
-MODULE_DESCRIPTION("NE3210 EISA Ethernet driver");
-MODULE_LICENSE("GPL");
-MODULE_DEVICE_TABLE(eisa, ne3210_ids);
-
-static int ne3210_init(void)
-{
-	return eisa_driver_register (&ne3210_eisa_driver);
-}
-
-static void ne3210_cleanup(void)
-{
-	eisa_driver_unregister (&ne3210_eisa_driver);
-}
-
-module_init (ne3210_init);
-module_exit (ne3210_cleanup);