Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) Support ipv6 checksum offload in sunvnet driver, from Shannon
    Nelson.

 2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric
    Dumazet.

 3) Allow generic XDP to work on virtual devices, from John Fastabend.

 4) Add bpf device maps and XDP_REDIRECT, which can be used to build
    arbitrary switching frameworks using XDP. From John Fastabend.

 5) Remove UFO offloads from the tree, gave us little other than bugs.

 6) Remove the IPSEC flow cache, from Florian Westphal.

 7) Support ipv6 route offload in mlxsw driver.

 8) Support VF representors in bnxt_en, from Sathya Perla.

 9) Add support for forward error correction modes to ethtool, from
    Vidya Sagar Ravipati.

10) Add time filter for packet scheduler action dumping, from Jamal Hadi
    Salim.

11) Extend the zerocopy sendmsg() used by virtio and tap to regular
    sockets via MSG_ZEROCOPY. From Willem de Bruijn.

12) Significantly rework value tracking in the BPF verifier, from Edward
    Cree.

13) Add new jump instructions to eBPF, from Daniel Borkmann.

14) Rework rtnetlink plumbing so that operations can be run without
    taking the RTNL semaphore. From Florian Westphal.

15) Support XDP in tap driver, from Jason Wang.

16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal.

17) Add Huawei hinic ethernet driver.

18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan
    Delalande.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits)
  i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq
  i40e: avoid NVM acquire deadlock during NVM update
  drivers: net: xgene: Remove return statement from void function
  drivers: net: xgene: Configure tx/rx delay for ACPI
  drivers: net: xgene: Read tx/rx delay for ACPI
  rocker: fix kcalloc parameter order
  rds: Fix non-atomic operation on shared flag variable
  net: sched: don't use GFP_KERNEL under spin lock
  vhost_net: correctly check tx avail during rx busy polling
  net: mdio-mux: add mdio_mux parameter to mdio_mux_init()
  rxrpc: Make service connection lookup always check for retry
  net: stmmac: Delete dead code for MDIO registration
  gianfar: Fix Tx flow control deactivation
  cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6
  cxgb4: Fix pause frame count in t4_get_port_stats
  cxgb4: fix memory leak
  tun: rename generic_xdp to skb_xdp
  tun: reserve extra headroom only when XDP is set
  net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping
  net: dsa: bcm_sf2: Advertise number of egress queues
  ...

1 files changed, 109 insertions, 0 deletions

diff --git a/drivers/net/phy/mdio-i2c.c b/drivers/net/phy/mdio-i2c.c
new file mode 100644
index 000000000000..6d24fd13ca86
--- /dev/null
+++ b/drivers/net/phy/mdio-i2c.c
@@ -0,0 +1,109 @@
+/*
+ * MDIO I2C bridge
+ *
+ * Copyright (C) 2015-2016 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Network PHYs can appear on I2C buses when they are part of SFP module.
+ * This driver exposes these PHYs to the networking PHY code, allowing
+ * our PHY drivers access to these PHYs, and so allowing configuration
+ * of their settings.
+ */
+#include <linux/i2c.h>
+#include <linux/phy.h>
+
+#include "mdio-i2c.h"
+
+/*
+ * I2C bus addresses 0x50 and 0x51 are normally an EEPROM, which is
+ * specified to be present in SFP modules.  These correspond with PHY
+ * addresses 16 and 17.  Disallow access to these "phy" addresses.
+ */
+static bool i2c_mii_valid_phy_id(int phy_id)
+{
+	return phy_id != 0x10 && phy_id != 0x11;
+}
+
+static unsigned int i2c_mii_phy_addr(int phy_id)
+{
+	return phy_id + 0x40;
+}
+
+static int i2c_mii_read(struct mii_bus *bus, int phy_id, int reg)
+{
+	struct i2c_adapter *i2c = bus->priv;
+	struct i2c_msg msgs[2];
+	u8 data[2], dev_addr = reg;
+	int bus_addr, ret;
+
+	if (!i2c_mii_valid_phy_id(phy_id))
+		return 0xffff;
+
+	bus_addr = i2c_mii_phy_addr(phy_id);
+	msgs[0].addr = bus_addr;
+	msgs[0].flags = 0;
+	msgs[0].len = 1;
+	msgs[0].buf = &dev_addr;
+	msgs[1].addr = bus_addr;
+	msgs[1].flags = I2C_M_RD;
+	msgs[1].len = sizeof(data);
+	msgs[1].buf = data;
+
+	ret = i2c_transfer(i2c, msgs, ARRAY_SIZE(msgs));
+	if (ret != ARRAY_SIZE(msgs))
+		return 0xffff;
+
+	return data[0] << 8 | data[1];
+}
+
+static int i2c_mii_write(struct mii_bus *bus, int phy_id, int reg, u16 val)
+{
+	struct i2c_adapter *i2c = bus->priv;
+	struct i2c_msg msg;
+	int ret;
+	u8 data[3];
+
+	if (!i2c_mii_valid_phy_id(phy_id))
+		return 0;
+
+	data[0] = reg;
+	data[1] = val >> 8;
+	data[2] = val;
+
+	msg.addr = i2c_mii_phy_addr(phy_id);
+	msg.flags = 0;
+	msg.len = 3;
+	msg.buf = data;
+
+	ret = i2c_transfer(i2c, &msg, 1);
+
+	return ret < 0 ? ret : 0;
+}
+
+struct mii_bus *mdio_i2c_alloc(struct device *parent, struct i2c_adapter *i2c)
+{
+	struct mii_bus *mii;
+
+	if (!i2c_check_functionality(i2c, I2C_FUNC_I2C))
+		return ERR_PTR(-EINVAL);
+
+	mii = mdiobus_alloc();
+	if (!mii)
+		return ERR_PTR(-ENOMEM);
+
+	snprintf(mii->id, MII_BUS_ID_SIZE, "i2c:%s", dev_name(parent));
+	mii->parent = parent;
+	mii->read = i2c_mii_read;
+	mii->write = i2c_mii_write;
+	mii->priv = i2c;
+
+	return mii;
+}
+EXPORT_SYMBOL_GPL(mdio_i2c_alloc);
+
+MODULE_AUTHOR("Russell King");
+MODULE_DESCRIPTION("MDIO I2C bridge library");
+MODULE_LICENSE("GPL v2");