net: phy: Kconfig: Remove redundant "Support for"

Remove the redundant "Support for" and "Drivers for" from the Kconfig
short description. This makes the manufacture much more prominent in
the list and makes the shortcut keys useful.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 35 insertions, 35 deletions

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 786e8b0b2d06..1c3e07c3d0b8 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -35,7 +35,7 @@ config MDIO_BCM_UNIMAC
 	  Starfighter 2 switches.
 
 config MDIO_BITBANG
-	tristate "Support for bitbanged MDIO buses"
+	tristate "Bitbanged MDIO buses"
 	help
 	  This module implements the MDIO bus protocol in software,
 	  for use by low level drivers that export the ability to
@@ -53,7 +53,7 @@ config MDIO_BUS_MUX
 	  device specific drivers.
 
 config MDIO_BUS_MUX_BCM_IPROC
-	tristate "Support for iProc based MDIO bus multiplexers"
+	tristate "Broadcom iProc based MDIO bus multiplexers"
 	depends on OF && OF_MDIO && (ARCH_BCM_IPROC || COMPILE_TEST)
 	select MDIO_BUS_MUX
 	default ARCH_BCM_IPROC
@@ -64,7 +64,7 @@ config MDIO_BUS_MUX_BCM_IPROC
 	  external and selection logic lies inside the same multiplexer.
 
 config MDIO_BUS_MUX_GPIO
-	tristate "Support for GPIO controlled MDIO bus multiplexers"
+	tristate "GPIO controlled MDIO bus multiplexers"
 	depends on OF_GPIO && OF_MDIO
 	select MDIO_BUS_MUX
 	help
@@ -74,7 +74,7 @@ config MDIO_BUS_MUX_GPIO
 	  selection is under the control of GPIO lines.
 
 config MDIO_BUS_MUX_MMIOREG
-	tristate "Support for MMIO device-controlled MDIO bus multiplexers"
+	tristate "MMIO device-controlled MDIO bus multiplexers"
 	depends on OF_MDIO && HAS_IOMEM
 	select MDIO_BUS_MUX
 	help
@@ -90,7 +90,7 @@ config MDIO_CAVIUM
 	tristate
 
 config MDIO_GPIO
-	tristate "Support for GPIO lib-based bitbanged MDIO buses"
+	tristate "GPIO lib-based bitbanged MDIO buses"
 	depends on MDIO_BITBANG && GPIOLIB
 	---help---
 	  Supports GPIO lib-based MDIO busses.
@@ -113,7 +113,7 @@ config MDIO_MOXART
           interface units of the MOXA ART SoC
 
 config MDIO_OCTEON
-	tristate "Support for MDIO buses on Octeon and some ThunderX SOCs"
+	tristate "Octeon and some ThunderX SOCs MDIO buses"
 	depends on 64BIT
 	depends on HAS_IOMEM
 	select MDIO_CAVIUM
@@ -131,7 +131,7 @@ config MDIO_SUN4I
 	  A12, A10s, etc.)
 
 config MDIO_THUNDER
-	tristate "Support for MDIO buses on ThunderX SOCs"
+	tristate "ThunderX SOCs MDIO buses"
 	depends on 64BIT
 	depends on PCI
 	select MDIO_CAVIUM
@@ -149,41 +149,41 @@ config MDIO_XGENE
 comment "MII PHY device drivers"
 
 config AMD_PHY
-	tristate "Drivers for the AMD PHYs"
+	tristate "AMD PHYs"
 	---help---
 	  Currently supports the am79c874
 
 config AQUANTIA_PHY
-        tristate "Drivers for the Aquantia PHYs"
+        tristate "Aquantia PHYs"
         ---help---
           Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
 
 config AT803X_PHY
-	tristate "Drivers for Atheros AT803X PHYs"
+	tristate "AT803X PHYs"
 	---help---
 	  Currently supports the AT8030 and AT8035 model
 
 config BCM63XX_PHY
-	tristate "Drivers for Broadcom 63xx SOCs internal PHY"
+	tristate "Broadcom 63xx SOCs internal PHY"
 	depends on BCM63XX
 	select BCM_NET_PHYLIB
 	---help---
 	  Currently supports the 6348 and 6358 PHYs.
 
 config BCM7XXX_PHY
-	tristate "Drivers for Broadcom 7xxx SOCs internal PHYs"
+	tristate "Broadcom 7xxx SOCs internal PHYs"
 	select BCM_NET_PHYLIB
 	---help---
 	  Currently supports the BCM7366, BCM7439, BCM7445, and
 	  40nm and 65nm generation of BCM7xxx Set Top Box SoCs.
 
 config BCM87XX_PHY
-	tristate "Driver for Broadcom BCM8706 and BCM8727 PHYs"
+	tristate "Broadcom BCM8706 and BCM8727 PHYs"
 	help
 	  Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs.
 
 config BCM_CYGNUS_PHY
-	tristate "Drivers for Broadcom Cygnus SoC internal PHY"
+	tristate "Broadcom Cygnus SoC internal PHY"
 	depends on ARCH_BCM_CYGNUS || COMPILE_TEST
 	depends on MDIO_BCM_IPROC
 	select BCM_NET_PHYLIB
@@ -199,34 +199,34 @@ config BCM_NET_PHYLIB
 	tristate
 
 config BROADCOM_PHY
-	tristate "Drivers for Broadcom PHYs"
+	tristate "Broadcom PHYs"
 	select BCM_NET_PHYLIB
 	---help---
 	  Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
 	  BCM5481 and BCM5482 PHYs.
 
 config CICADA_PHY
-	tristate "Drivers for the Cicada PHYs"
+	tristate "Cicada PHYs"
 	---help---
 	  Currently supports the cis8204
 
 config DAVICOM_PHY
-	tristate "Drivers for Davicom PHYs"
+	tristate "Davicom PHYs"
 	---help---
 	  Currently supports dm9161e and dm9131
 
 config DP83848_PHY
-	tristate "Driver for Texas Instruments DP83848 PHY"
+	tristate "Texas Instruments DP83848 PHY"
 	---help---
 	  Supports the DP83848 PHY.
 
 config DP83867_PHY
-	tristate "Drivers for Texas Instruments DP83867 Gigabit PHY"
+	tristate "Texas Instruments DP83867 Gigabit PHY"
 	---help---
 	  Currently supports the DP83867 PHY.
 
 config FIXED_PHY
-	tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
+	tristate "MDIO Bus/PHY emulation with fixed speed/link PHYs"
 	depends on PHYLIB
 	select SWPHY
 	---help---
@@ -236,12 +236,12 @@ config FIXED_PHY
 	  Currently tested with mpc866ads and mpc8349e-mitx.
 
 config ICPLUS_PHY
-	tristate "Drivers for ICPlus PHYs"
+	tristate "ICPlus PHYs"
 	---help---
 	  Currently supports the IP175C and IP1001 PHYs.
 
 config INTEL_XWAY_PHY
-	tristate "Driver for Intel XWAY PHYs"
+	tristate "Intel XWAY PHYs"
 	---help---
 	  Supports the Intel XWAY (former Lantiq) 11G and 22E PHYs.
 	  These PHYs are marked as standalone chips under the names
@@ -249,67 +249,67 @@ config INTEL_XWAY_PHY
 	  SoCs xRX200, xRX300, xRX330, xRX350 and xRX550.
 
 config LSI_ET1011C_PHY
-	tristate "Driver for LSI ET1011C PHY"
+	tristate "LSI ET1011C PHY"
 	---help---
 	  Supports the LSI ET1011C PHY.
 
 config LXT_PHY
-	tristate "Drivers for the Intel LXT PHYs"
+	tristate "Intel LXT PHYs"
 	---help---
 	  Currently supports the lxt970, lxt971
 
 config MARVELL_PHY
-	tristate "Drivers for Marvell PHYs"
+	tristate "Marvell PHYs"
 	---help---
 	  Currently has a driver for the 88E1011S
 
 config MICREL_PHY
-	tristate "Driver for Micrel PHYs"
+	tristate "Micrel PHYs"
 	---help---
 	  Supports the KSZ9021, VSC8201, KS8001 PHYs.
 
 config MICROCHIP_PHY
-	tristate "Drivers for Microchip PHYs"
+	tristate "Microchip PHYs"
 	help
 	  Supports the LAN88XX PHYs.
 
 config MICROSEMI_PHY
-    tristate "Drivers for the Microsemi PHYs"
+    tristate "Microsemi PHYs"
     ---help---
       Currently supports the VSC8531 and VSC8541 PHYs
 
 config NATIONAL_PHY
-	tristate "Drivers for National Semiconductor PHYs"
+	tristate "National Semiconductor PHYs"
 	---help---
 	  Currently supports the DP83865 PHY.
 
 config QSEMI_PHY
-	tristate "Drivers for Quality Semiconductor PHYs"
+	tristate "Quality Semiconductor PHYs"
 	---help---
 	  Currently supports the qs6612
 
 config REALTEK_PHY
-	tristate "Drivers for Realtek PHYs"
+	tristate "Realtek PHYs"
 	---help---
 	  Supports the Realtek 821x PHY.
 
 config SMSC_PHY
-	tristate "Drivers for SMSC PHYs"
+	tristate "SMSC PHYs"
 	---help---
 	  Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
 
 config STE10XP
-	tristate "Driver for STMicroelectronics STe10Xp PHYs"
+	tristate "STMicroelectronics STe10Xp PHYs"
 	---help---
 	  This is the driver for the STe100p and STe101p PHYs.
 
 config TERANETICS_PHY
-        tristate "Drivers for the Teranetics PHYs"
+        tristate "Teranetics PHYs"
         ---help---
           Currently supports the Teranetics TN2020
 
 config VITESSE_PHY
-        tristate "Drivers for the Vitesse PHYs"
+        tristate "Vitesse PHYs"
         ---help---
           Currently supports the vsc8244