Merge tag 'v3.13' into for-3.15

Linux 3.13

Conflicts:
	include/net/xfrm.h

Simple merge where v3.13 removed 'extern' from definitions and the audit
tree did s/u32/unsigned int/ to the same definitions.

11 files changed, 454 insertions, 22 deletions

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 342561ad3158..9b5d46c03eed 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -154,6 +154,13 @@ config MDIO_SUN4I
 	  interface units of the Allwinner SoC that have an EMAC (A10,
 	  A12, A10s, etc.)
 
+config MDIO_MOXART
+        tristate "MOXA ART MDIO interface support"
+        depends on ARCH_MOXART
+        help
+          This driver supports the MDIO interface found in the network
+          interface units of the MOXA ART SoC
+
 config MDIO_BUS_MUX
 	tristate
 	depends on OF_MDIO
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 23a2ab2e847e..9013dfa12aa3 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -31,3 +31,4 @@ obj-$(CONFIG_MDIO_BUS_MUX)	+= mdio-mux.o
 obj-$(CONFIG_MDIO_BUS_MUX_GPIO)	+= mdio-mux-gpio.o
 obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o
 obj-$(CONFIG_MDIO_SUN4I)	+= mdio-sun4i.o
+obj-$(CONFIG_MDIO_MOXART)	+= mdio-moxart.o
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index ac22283aaf23..bc71947b1ec3 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -100,6 +100,45 @@ static void at803x_get_wol(struct phy_device *phydev,
 		wol->wolopts |= WAKE_MAGIC;
 }
 
+static int at803x_suspend(struct phy_device *phydev)
+{
+	int value;
+	int wol_enabled;
+
+	mutex_lock(&phydev->lock);
+
+	value = phy_read(phydev, AT803X_INTR_ENABLE);
+	wol_enabled = value & AT803X_WOL_ENABLE;
+
+	value = phy_read(phydev, MII_BMCR);
+
+	if (wol_enabled)
+		value |= BMCR_ISOLATE;
+	else
+		value |= BMCR_PDOWN;
+
+	phy_write(phydev, MII_BMCR, value);
+
+	mutex_unlock(&phydev->lock);
+
+	return 0;
+}
+
+static int at803x_resume(struct phy_device *phydev)
+{
+	int value;
+
+	mutex_lock(&phydev->lock);
+
+	value = phy_read(phydev, MII_BMCR);
+	value &= ~(BMCR_PDOWN | BMCR_ISOLATE);
+	phy_write(phydev, MII_BMCR, value);
+
+	mutex_unlock(&phydev->lock);
+
+	return 0;
+}
+
 static int at803x_config_init(struct phy_device *phydev)
 {
 	int val;
@@ -161,10 +200,12 @@ static struct phy_driver at803x_driver[] = {
 	.config_init	= at803x_config_init,
 	.set_wol	= at803x_set_wol,
 	.get_wol	= at803x_get_wol,
+	.suspend	= at803x_suspend,
+	.resume		= at803x_resume,
 	.features	= PHY_GBIT_FEATURES,
 	.flags		= PHY_HAS_INTERRUPT,
-	.config_aneg	= &genphy_config_aneg,
-	.read_status	= &genphy_read_status,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
 	.driver		= {
 		.owner = THIS_MODULE,
 	},
@@ -176,10 +217,12 @@ static struct phy_driver at803x_driver[] = {
 	.config_init	= at803x_config_init,
 	.set_wol	= at803x_set_wol,
 	.get_wol	= at803x_get_wol,
+	.suspend	= at803x_suspend,
+	.resume		= at803x_resume,
 	.features	= PHY_GBIT_FEATURES,
 	.flags		= PHY_HAS_INTERRUPT,
-	.config_aneg	= &genphy_config_aneg,
-	.read_status	= &genphy_read_status,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
 	.driver		= {
 		.owner = THIS_MODULE,
 	},
@@ -191,10 +234,12 @@ static struct phy_driver at803x_driver[] = {
 	.config_init	= at803x_config_init,
 	.set_wol	= at803x_set_wol,
 	.get_wol	= at803x_get_wol,
+	.suspend	= at803x_suspend,
+	.resume		= at803x_resume,
 	.features	= PHY_GBIT_FEATURES,
 	.flags		= PHY_HAS_INTERRUPT,
-	.config_aneg	= &genphy_config_aneg,
-	.read_status	= &genphy_read_status,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
 	.driver		= {
 		.owner = THIS_MODULE,
 	},
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 2e91477362d4..2e3c778ea9bf 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -34,9 +34,9 @@
 #include <linux/marvell_phy.h>
 #include <linux/of.h>
 
-#include <asm/io.h>
+#include <linux/io.h>
 #include <asm/irq.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
 
 #define MII_MARVELL_PHY_PAGE		22
 
diff --git a/drivers/net/phy/mdio-moxart.c b/drivers/net/phy/mdio-moxart.c
new file mode 100644
index 000000000000..a5741cb0304e
--- /dev/null
+++ b/drivers/net/phy/mdio-moxart.c
@@ -0,0 +1,201 @@
+/* MOXA ART Ethernet (RTL8201CP) MDIO interface driver
+ *
+ * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_address.h>
+#include <linux/of_mdio.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+#define REG_PHY_CTRL            0
+#define REG_PHY_WRITE_DATA      4
+
+/* REG_PHY_CTRL */
+#define MIIWR                   BIT(27) /* init write sequence (auto cleared)*/
+#define MIIRD                   BIT(26)
+#define REGAD_MASK              0x3e00000
+#define PHYAD_MASK              0x1f0000
+#define MIIRDATA_MASK           0xffff
+
+/* REG_PHY_WRITE_DATA */
+#define MIIWDATA_MASK           0xffff
+
+struct moxart_mdio_data {
+	void __iomem		*base;
+};
+
+static int moxart_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
+{
+	struct moxart_mdio_data *data = bus->priv;
+	u32 ctrl = 0;
+	unsigned int count = 5;
+
+	dev_dbg(&bus->dev, "%s\n", __func__);
+
+	ctrl |= MIIRD | ((mii_id << 16) & PHYAD_MASK) |
+		((regnum << 21) & REGAD_MASK);
+
+	writel(ctrl, data->base + REG_PHY_CTRL);
+
+	do {
+		ctrl = readl(data->base + REG_PHY_CTRL);
+
+		if (!(ctrl & MIIRD))
+			return ctrl & MIIRDATA_MASK;
+
+		mdelay(10);
+		count--;
+	} while (count > 0);
+
+	dev_dbg(&bus->dev, "%s timed out\n", __func__);
+
+	return -ETIMEDOUT;
+}
+
+static int moxart_mdio_write(struct mii_bus *bus, int mii_id,
+			     int regnum, u16 value)
+{
+	struct moxart_mdio_data *data = bus->priv;
+	u32 ctrl = 0;
+	unsigned int count = 5;
+
+	dev_dbg(&bus->dev, "%s\n", __func__);
+
+	ctrl |= MIIWR | ((mii_id << 16) & PHYAD_MASK) |
+		((regnum << 21) & REGAD_MASK);
+
+	value &= MIIWDATA_MASK;
+
+	writel(value, data->base + REG_PHY_WRITE_DATA);
+	writel(ctrl, data->base + REG_PHY_CTRL);
+
+	do {
+		ctrl = readl(data->base + REG_PHY_CTRL);
+
+		if (!(ctrl & MIIWR))
+			return 0;
+
+		mdelay(10);
+		count--;
+	} while (count > 0);
+
+	dev_dbg(&bus->dev, "%s timed out\n", __func__);
+
+	return -ETIMEDOUT;
+}
+
+static int moxart_mdio_reset(struct mii_bus *bus)
+{
+	int data, i;
+
+	for (i = 0; i < PHY_MAX_ADDR; i++) {
+		data = moxart_mdio_read(bus, i, MII_BMCR);
+		if (data < 0)
+			continue;
+
+		data |= BMCR_RESET;
+		if (moxart_mdio_write(bus, i, MII_BMCR, data) < 0)
+			continue;
+	}
+
+	return 0;
+}
+
+static int moxart_mdio_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct mii_bus *bus;
+	struct moxart_mdio_data *data;
+	struct resource *res;
+	int ret, i;
+
+	bus = mdiobus_alloc_size(sizeof(*data));
+	if (!bus)
+		return -ENOMEM;
+
+	bus->name = "MOXA ART Ethernet MII";
+	bus->read = &moxart_mdio_read;
+	bus->write = &moxart_mdio_write;
+	bus->reset = &moxart_mdio_reset;
+	snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d-mii", pdev->name, pdev->id);
+	bus->parent = &pdev->dev;
+
+	bus->irq = devm_kzalloc(&pdev->dev, sizeof(int) * PHY_MAX_ADDR,
+			GFP_KERNEL);
+	if (!bus->irq) {
+		ret = -ENOMEM;
+		goto err_out_free_mdiobus;
+	}
+
+	/* Setting PHY_IGNORE_INTERRUPT here even if it has no effect,
+	 * of_mdiobus_register() sets these PHY_POLL.
+	 * Ideally, the interrupt from MAC controller could be used to
+	 * detect link state changes, not polling, i.e. if there was
+	 * a way phy_driver could set PHY_HAS_INTERRUPT but have that
+	 * interrupt handled in ethernet drivercode.
+	 */
+	for (i = 0; i < PHY_MAX_ADDR; i++)
+		bus->irq[i] = PHY_IGNORE_INTERRUPT;
+
+	data = bus->priv;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	data->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(data->base)) {
+		ret = PTR_ERR(data->base);
+		goto err_out_free_mdiobus;
+	}
+
+	ret = of_mdiobus_register(bus, np);
+	if (ret < 0)
+		goto err_out_free_mdiobus;
+
+	platform_set_drvdata(pdev, bus);
+
+	return 0;
+
+err_out_free_mdiobus:
+	mdiobus_free(bus);
+	return ret;
+}
+
+static int moxart_mdio_remove(struct platform_device *pdev)
+{
+	struct mii_bus *bus = platform_get_drvdata(pdev);
+
+	mdiobus_unregister(bus);
+	mdiobus_free(bus);
+
+	return 0;
+}
+
+static const struct of_device_id moxart_mdio_dt_ids[] = {
+	{ .compatible = "moxa,moxart-mdio" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, moxart_mdio_dt_ids);
+
+static struct platform_driver moxart_mdio_driver = {
+	.probe = moxart_mdio_probe,
+	.remove = moxart_mdio_remove,
+	.driver = {
+		.name = "moxart-mdio",
+		.of_match_table = moxart_mdio_dt_ids,
+	},
+};
+
+module_platform_driver(moxart_mdio_driver);
+
+MODULE_DESCRIPTION("MOXA ART MDIO interface driver");
+MODULE_AUTHOR("Jonas Jensen <jonas.jensen@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index dc920974204e..56178761ce93 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -438,17 +438,19 @@ phy_id_show(struct device *dev, struct device_attribute *attr, char *buf)
 
 	return sprintf(buf, "0x%.8lx\n", (unsigned long)phydev->phy_id);
 }
+static DEVICE_ATTR_RO(phy_id);
 
-static struct device_attribute mdio_dev_attrs[] = {
-	__ATTR_RO(phy_id),
-	__ATTR_NULL
+static struct attribute *mdio_dev_attrs[] = {
+	&dev_attr_phy_id.attr,
+	NULL,
 };
+ATTRIBUTE_GROUPS(mdio_dev);
 
 struct bus_type mdio_bus_type = {
 	.name		= "mdio_bus",
 	.match		= mdio_bus_match,
 	.pm		= MDIO_BUS_PM_OPS,
-	.dev_attrs	= mdio_dev_attrs,
+	.dev_groups	= mdio_dev_groups,
 };
 EXPORT_SYMBOL(mdio_bus_type);
 
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index c31aad0004cb..26fa05a472b4 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -287,6 +287,8 @@ static struct phy_driver ksphy_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= ks8737_config_intr,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
 	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= PHY_ID_KSZ8021,
@@ -300,6 +302,8 @@ static struct phy_driver ksphy_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
 	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= PHY_ID_KSZ8031,
@@ -313,6 +317,8 @@ static struct phy_driver ksphy_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
 	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= PHY_ID_KSZ8041,
@@ -326,6 +332,23 @@ static struct phy_driver ksphy_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
+	.driver		= { .owner = THIS_MODULE,},
+}, {
+	.phy_id		= PHY_ID_KSZ8041RNLI,
+	.phy_id_mask	= 0x00fffff0,
+	.name		= "Micrel KSZ8041RNLI",
+	.features	= PHY_BASIC_FEATURES |
+			  SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+	.flags		= PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
+	.config_init	= kszphy_config_init,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.ack_interrupt	= kszphy_ack_interrupt,
+	.config_intr	= kszphy_config_intr,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
 	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= PHY_ID_KSZ8051,
@@ -339,6 +362,8 @@ static struct phy_driver ksphy_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
 	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= PHY_ID_KSZ8001,
@@ -351,6 +376,8 @@ static struct phy_driver ksphy_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
 	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= PHY_ID_KSZ8081,
@@ -363,6 +390,8 @@ static struct phy_driver ksphy_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
 	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= PHY_ID_KSZ8061,
@@ -375,6 +404,8 @@ static struct phy_driver ksphy_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= kszphy_config_intr,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
 	.driver		= { .owner = THIS_MODULE,},
 }, {
 	.phy_id		= PHY_ID_KSZ9021,
@@ -387,6 +418,8 @@ static struct phy_driver ksphy_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= ksz9021_config_intr,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
 	.driver		= { .owner = THIS_MODULE, },
 }, {
 	.phy_id		= PHY_ID_KSZ9031,
@@ -400,6 +433,8 @@ static struct phy_driver ksphy_driver[] = {
 	.read_status	= genphy_read_status,
 	.ack_interrupt	= kszphy_ack_interrupt,
 	.config_intr	= ksz9021_config_intr,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
 	.driver		= { .owner = THIS_MODULE, },
 }, {
 	.phy_id		= PHY_ID_KSZ8873MLL,
@@ -410,6 +445,8 @@ static struct phy_driver ksphy_driver[] = {
 	.config_init	= kszphy_config_init,
 	.config_aneg	= ksz8873mll_config_aneg,
 	.read_status	= ksz8873mll_read_status,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
 	.driver		= { .owner = THIS_MODULE, },
 }, {
 	.phy_id		= PHY_ID_KSZ886X,
@@ -420,6 +457,8 @@ static struct phy_driver ksphy_driver[] = {
 	.config_init	= kszphy_config_init,
 	.config_aneg	= genphy_config_aneg,
 	.read_status	= genphy_read_status,
+	.suspend	= genphy_suspend,
+	.resume		= genphy_resume,
 	.driver		= { .owner = THIS_MODULE, },
 } };
 
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 36c6994436b7..98434b84f041 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -565,10 +565,8 @@ int phy_start_interrupts(struct phy_device *phydev)
 	int err = 0;
 
 	atomic_set(&phydev->irq_disable, 0);
-	if (request_irq(phydev->irq, phy_interrupt,
-				IRQF_SHARED,
-				"phy_interrupt",
-				phydev) < 0) {
+	if (request_irq(phydev->irq, phy_interrupt, 0, "phy_interrupt",
+			phydev) < 0) {
 		pr_warn("%s: Can't get IRQ %d (PHY)\n",
 			phydev->bus->name, phydev->irq);
 		phydev->irq = PHY_POLL;
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 74630e94fa3b..d6447b3f7409 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -697,7 +697,7 @@ static int genphy_config_advert(struct phy_device *phydev)
  *   to the values in phydev. Assumes that the values are valid.
  *   Please see phy_sanitize_settings().
  */
-static int genphy_setup_forced(struct phy_device *phydev)
+int genphy_setup_forced(struct phy_device *phydev)
 {
 	int err;
 	int ctl = 0;
@@ -716,7 +716,7 @@ static int genphy_setup_forced(struct phy_device *phydev)
 
 	return err;
 }
-
+EXPORT_SYMBOL(genphy_setup_forced);
 
 /**
  * genphy_restart_aneg - Enable and Restart Autonegotiation
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 138de837977f..fa1d69a38ccf 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -64,6 +64,18 @@ static int rtl8211e_config_intr(struct phy_device *phydev)
 	return err;
 }
 
+/* RTL8201CP */
+static struct phy_driver rtl8201cp_driver = {
+	.phy_id         = 0x00008201,
+	.name           = "RTL8201CP Ethernet",
+	.phy_id_mask    = 0x0000ffff,
+	.features       = PHY_BASIC_FEATURES,
+	.flags          = PHY_HAS_INTERRUPT,
+	.config_aneg    = &genphy_config_aneg,
+	.read_status    = &genphy_read_status,
+	.driver         = { .owner = THIS_MODULE,},
+};
+
 /* RTL8211B */
 static struct phy_driver rtl8211b_driver = {
 	.phy_id		= 0x001cc912,
@@ -98,6 +110,9 @@ static int __init realtek_init(void)
 {
 	int ret;
 
+	ret = phy_driver_register(&rtl8201cp_driver);
+	if (ret < 0)
+		return -ENODEV;
 	ret = phy_driver_register(&rtl8211b_driver);
 	if (ret < 0)
 		return -ENODEV;
diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
index 69b482bce7d2..14372c65a7e8 100644
--- a/drivers/net/phy/vitesse.c
+++ b/drivers/net/phy/vitesse.c
@@ -3,7 +3,7 @@
  *
  * Author: Kriston Carson
  *
- * Copyright (c) 2005, 2009 Freescale Semiconductor, Inc.
+ * Copyright (c) 2005, 2009, 2011 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -18,6 +18,11 @@
 #include <linux/ethtool.h>
 #include <linux/phy.h>
 
+/* Vitesse Extended Page Magic Register(s) */
+#define MII_VSC82X4_EXT_PAGE_16E	0x10
+#define MII_VSC82X4_EXT_PAGE_17E	0x11
+#define MII_VSC82X4_EXT_PAGE_18E	0x12
+
 /* Vitesse Extended Control Register 1 */
 #define MII_VSC8244_EXT_CON1           0x17
 #define MII_VSC8244_EXTCON1_INIT       0x0000
@@ -54,7 +59,14 @@
 #define MII_VSC8221_AUXCONSTAT_INIT	0x0004 /* need to set this bit? */
 #define MII_VSC8221_AUXCONSTAT_RESERVED	0x0004
 
+/* Vitesse Extended Page Access Register */
+#define MII_VSC82X4_EXT_PAGE_ACCESS	0x1f
+
+#define PHY_ID_VSC8234			0x000fc620
 #define PHY_ID_VSC8244			0x000fc6c0
+#define PHY_ID_VSC8514			0x00070670
+#define PHY_ID_VSC8574			0x000704a0
+#define PHY_ID_VSC8662			0x00070660
 #define PHY_ID_VSC8221			0x000fc550
 #define PHY_ID_VSC8211			0x000fc4b0
 
@@ -118,7 +130,10 @@ static int vsc82xx_config_intr(struct phy_device *phydev)
 
 	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
 		err = phy_write(phydev, MII_VSC8244_IMASK,
-			phydev->drv->phy_id == PHY_ID_VSC8244 ?
+			(phydev->drv->phy_id == PHY_ID_VSC8234 ||
+			 phydev->drv->phy_id == PHY_ID_VSC8244 ||
+			 phydev->drv->phy_id == PHY_ID_VSC8514 ||
+			 phydev->drv->phy_id == PHY_ID_VSC8574) ?
 				MII_VSC8244_IMASK_MASK :
 				MII_VSC8221_IMASK_MASK);
 	else {
@@ -149,21 +164,126 @@ static int vsc8221_config_init(struct phy_device *phydev)
 	 */
 }
 
-/* Vitesse 824x */
+/* vsc82x4_config_autocross_enable - Enable auto MDI/MDI-X for forced links
+ * @phydev: target phy_device struct
+ *
+ * Enable auto MDI/MDI-X when in 10/100 forced link speeds by writing
+ * special values in the VSC8234/VSC8244 extended reserved registers
+ */
+static int vsc82x4_config_autocross_enable(struct phy_device *phydev)
+{
+	int ret;
+
+	if (phydev->autoneg == AUTONEG_ENABLE || phydev->speed > SPEED_100)
+		return 0;
+
+	/* map extended registers set 0x10 - 0x1e */
+	ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x52b5);
+	if (ret >= 0)
+		ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_18E, 0x0012);
+	if (ret >= 0)
+		ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_17E, 0x2803);
+	if (ret >= 0)
+		ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_16E, 0x87fa);
+	/* map standard registers set 0x10 - 0x1e */
+	if (ret >= 0)
+		ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x0000);
+	else
+		phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x0000);
+
+	return ret;
+}
+
+/* vsc82x4_config_aneg - restart auto-negotiation or write BMCR
+ * @phydev: target phy_device struct
+ *
+ * Description: If auto-negotiation is enabled, we configure the
+ *   advertising, and then restart auto-negotiation.  If it is not
+ *   enabled, then we write the BMCR and also start the auto
+ *   MDI/MDI-X feature
+ */
+static int vsc82x4_config_aneg(struct phy_device *phydev)
+{
+	int ret;
+
+	/* Enable auto MDI/MDI-X when in 10/100 forced link speeds by
+	 * writing special values in the VSC8234 extended reserved registers
+	 */
+	if (phydev->autoneg != AUTONEG_ENABLE && phydev->speed <= SPEED_100) {
+		ret = genphy_setup_forced(phydev);
+
+		if (ret < 0) /* error */
+			return ret;
+
+		return vsc82x4_config_autocross_enable(phydev);
+	}
+
+	return genphy_config_aneg(phydev);
+}
+
+/* Vitesse 82xx */
 static struct phy_driver vsc82xx_driver[] = {
 {
+	.phy_id         = PHY_ID_VSC8234,
+	.name           = "Vitesse VSC8234",
+	.phy_id_mask    = 0x000ffff0,
+	.features       = PHY_GBIT_FEATURES,
+	.flags          = PHY_HAS_INTERRUPT,
+	.config_init    = &vsc824x_config_init,
+	.config_aneg    = &vsc82x4_config_aneg,
+	.read_status    = &genphy_read_status,
+	.ack_interrupt  = &vsc824x_ack_interrupt,
+	.config_intr    = &vsc82xx_config_intr,
+	.driver         = { .owner = THIS_MODULE,},
+}, {
 	.phy_id		= PHY_ID_VSC8244,
 	.name		= "Vitesse VSC8244",
 	.phy_id_mask	= 0x000fffc0,
 	.features	= PHY_GBIT_FEATURES,
 	.flags		= PHY_HAS_INTERRUPT,
 	.config_init	= &vsc824x_config_init,
-	.config_aneg	= &genphy_config_aneg,
+	.config_aneg	= &vsc82x4_config_aneg,
 	.read_status	= &genphy_read_status,
 	.ack_interrupt	= &vsc824x_ack_interrupt,
 	.config_intr	= &vsc82xx_config_intr,
 	.driver		= { .owner = THIS_MODULE,},
 }, {
+	.phy_id		= PHY_ID_VSC8514,
+	.name		= "Vitesse VSC8514",
+	.phy_id_mask	= 0x000ffff0,
+	.features	= PHY_GBIT_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.config_init	= &vsc824x_config_init,
+	.config_aneg	= &vsc82x4_config_aneg,
+	.read_status	= &genphy_read_status,
+	.ack_interrupt	= &vsc824x_ack_interrupt,
+	.config_intr	= &vsc82xx_config_intr,
+	.driver		= { .owner = THIS_MODULE,},
+}, {
+	.phy_id         = PHY_ID_VSC8574,
+	.name           = "Vitesse VSC8574",
+	.phy_id_mask    = 0x000ffff0,
+	.features       = PHY_GBIT_FEATURES,
+	.flags          = PHY_HAS_INTERRUPT,
+	.config_init    = &vsc824x_config_init,
+	.config_aneg    = &vsc82x4_config_aneg,
+	.read_status    = &genphy_read_status,
+	.ack_interrupt  = &vsc824x_ack_interrupt,
+	.config_intr    = &vsc82xx_config_intr,
+	.driver         = { .owner = THIS_MODULE,},
+}, {
+	.phy_id         = PHY_ID_VSC8662,
+	.name           = "Vitesse VSC8662",
+	.phy_id_mask    = 0x000ffff0,
+	.features       = PHY_GBIT_FEATURES,
+	.flags          = PHY_HAS_INTERRUPT,
+	.config_init    = &vsc824x_config_init,
+	.config_aneg    = &vsc82x4_config_aneg,
+	.read_status    = &genphy_read_status,
+	.ack_interrupt  = &vsc824x_ack_interrupt,
+	.config_intr    = &vsc82xx_config_intr,
+	.driver         = { .owner = THIS_MODULE,},
+}, {
 	/* Vitesse 8221 */
 	.phy_id		= PHY_ID_VSC8221,
 	.phy_id_mask	= 0x000ffff0,
@@ -207,7 +327,11 @@ module_init(vsc82xx_init);
 module_exit(vsc82xx_exit);
 
 static struct mdio_device_id __maybe_unused vitesse_tbl[] = {
+	{ PHY_ID_VSC8234, 0x000ffff0 },
 	{ PHY_ID_VSC8244, 0x000fffc0 },
+	{ PHY_ID_VSC8514, 0x000ffff0 },
+	{ PHY_ID_VSC8574, 0x000ffff0 },
+	{ PHY_ID_VSC8662, 0x000ffff0 },
 	{ PHY_ID_VSC8221, 0x000ffff0 },
 	{ PHY_ID_VSC8211, 0x000ffff0 },
 	{ }