qlge: Add worker-handler for firmware events.

This worker and it's supporting routines are used for
IDC 'inter-device-communication' events that require
an ACK mailbox command be sent to allow completion
of the request. These requests are originated by
another function wanting to change some common
port paramters. Typical example would be:

1) Change max TX/RX frame size allowed.
2) Change pause parameters.
3) Change loopback mode.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 143 insertions, 0 deletions

diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
index 3b4b494387aa..9f1fe542e271 100644
--- a/drivers/net/qlge/qlge_mpi.c
+++ b/drivers/net/qlge/qlge_mpi.c
@@ -138,6 +138,40 @@ end:
 	return status;
 }
 
+/* We are being asked by firmware to accept
+ * a change to the port.  This is only
+ * a change to max frame sizes (Tx/Rx), pause
+ * paramters, or loopback mode. We wake up a worker
+ * to handler processing this since a mailbox command
+ * will need to be sent to ACK the request.
+ */
+static int ql_idc_req_aen(struct ql_adapter *qdev)
+{
+	int status;
+	struct mbox_params *mbcp = &qdev->idc_mbc;
+
+	QPRINTK(qdev, DRV, ERR, "Enter!\n");
+	/* Get the status data and start up a thread to
+	 * handle the request.
+	 */
+	mbcp = &qdev->idc_mbc;
+	mbcp->out_count = 4;
+	status = ql_get_mb_sts(qdev, mbcp);
+	if (status) {
+		QPRINTK(qdev, DRV, ERR,
+			"Could not read MPI, resetting ASIC!\n");
+		ql_queue_asic_error(qdev);
+	} else	{
+		/* Begin polled mode early so
+		 * we don't get another interrupt
+		 * when we leave mpi_worker.
+		 */
+		ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16));
+		queue_delayed_work(qdev->workqueue, &qdev->mpi_idc_work, 0);
+	}
+	return status;
+}
+
 /* Process an inter-device event completion.
  * If good, signal the caller's completion.
  */
@@ -175,6 +209,35 @@ static void ql_link_up(struct ql_adapter *qdev, struct mbox_params *mbcp)
 	qdev->link_status = mbcp->mbox_out[1];
 	QPRINTK(qdev, DRV, ERR, "Link Up.\n");
 
+	/* If we're coming back from an IDC event
+	 * then set up the CAM and frame routing.
+	 */
+	if (test_bit(QL_CAM_RT_SET, &qdev->flags)) {
+		status = ql_cam_route_initialize(qdev);
+		if (status) {
+			QPRINTK(qdev, IFUP, ERR,
+			"Failed to init CAM/Routing tables.\n");
+			return;
+		} else
+			clear_bit(QL_CAM_RT_SET, &qdev->flags);
+	}
+
+	/* Queue up a worker to check the frame
+	 * size information, and fix it if it's not
+	 * to our liking.
+	 */
+	if (!test_bit(QL_PORT_CFG, &qdev->flags)) {
+		QPRINTK(qdev, DRV, ERR, "Queue Port Config Worker!\n");
+		set_bit(QL_PORT_CFG, &qdev->flags);
+		/* Begin polled mode early so
+		 * we don't get another interrupt
+		 * when we leave mpi_worker dpc.
+		 */
+		ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16));
+		queue_delayed_work(qdev->workqueue,
+				&qdev->mpi_port_cfg_work, 0);
+	}
+
 	netif_carrier_on(qdev->ndev);
 }
 
@@ -283,6 +346,15 @@ static int ql_mpi_handler(struct ql_adapter *qdev, struct mbox_params *mbcp)
 		status = ql_get_mb_sts(qdev, mbcp);
 		return status;
 
+	/* We are being asked by firmware to accept
+	 * a change to the port.  This is only
+	 * a change to max frame sizes (Tx/Rx), pause
+	 * paramters, or loopback mode.
+	 */
+	case AEN_IDC_REQ:
+		status = ql_idc_req_aen(qdev);
+		break;
+
 	/* Process and inbound IDC event.
 	 * This will happen when we're trying to
 	 * change tx/rx max frame size, change pause
@@ -451,6 +523,38 @@ int ql_mb_get_fw_state(struct ql_adapter *qdev)
 	return status;
 }
 
+/* Send and ACK mailbox command to the firmware to
+ * let it continue with the change.
+ */
+int ql_mb_idc_ack(struct ql_adapter *qdev)
+{
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+	int status = 0;
+
+	memset(mbcp, 0, sizeof(struct mbox_params));
+
+	mbcp->in_count = 5;
+	mbcp->out_count = 1;
+
+	mbcp->mbox_in[0] = MB_CMD_IDC_ACK;
+	mbcp->mbox_in[1] = qdev->idc_mbc.mbox_out[1];
+	mbcp->mbox_in[2] = qdev->idc_mbc.mbox_out[2];
+	mbcp->mbox_in[3] = qdev->idc_mbc.mbox_out[3];
+	mbcp->mbox_in[4] = qdev->idc_mbc.mbox_out[4];
+
+	status = ql_mailbox_command(qdev, mbcp);
+	if (status)
+		return status;
+
+	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
+		QPRINTK(qdev, DRV, ERR,
+			"Failed IDC ACK send.\n");
+		status = -EIO;
+	}
+	return status;
+}
+
 /* Get link settings and maximum frame size settings
  * for the current port.
  * Most likely will block.
@@ -627,6 +731,44 @@ err:
 	goto end;
 }
 
+/* Process an inter-device request.  This is issues by
+ * the firmware in response to another function requesting
+ * a change to the port. We set a flag to indicate a change
+ * has been made and then send a mailbox command ACKing
+ * the change request.
+ */
+void ql_mpi_idc_work(struct work_struct *work)
+{
+	struct ql_adapter *qdev =
+	    container_of(work, struct ql_adapter, mpi_idc_work.work);
+	int status;
+	struct mbox_params *mbcp = &qdev->idc_mbc;
+	u32 aen;
+
+	aen = mbcp->mbox_out[1] >> 16;
+
+	switch (aen) {
+	default:
+		QPRINTK(qdev, DRV, ERR,
+			"Bug: Unhandled IDC action.\n");
+		break;
+	case MB_CMD_PORT_RESET:
+	case MB_CMD_SET_PORT_CFG:
+	case MB_CMD_STOP_FW:
+		netif_carrier_off(qdev->ndev);
+		/* Signal the resulting link up AEN
+		 * that the frame routing and mac addr
+		 * needs to be set.
+		 * */
+		set_bit(QL_CAM_RT_SET, &qdev->flags);
+		status = ql_mb_idc_ack(qdev);
+		if (status) {
+			QPRINTK(qdev, DRV, ERR,
+			"Bug: No pending IDC!\n");
+		}
+	}
+}
+
 void ql_mpi_work(struct work_struct *work)
 {
 	struct ql_adapter *qdev =
@@ -652,5 +794,6 @@ void ql_mpi_reset_work(struct work_struct *work)
 	    container_of(work, struct ql_adapter, mpi_reset_work.work);
 	cancel_delayed_work_sync(&qdev->mpi_work);
 	cancel_delayed_work_sync(&qdev->mpi_port_cfg_work);
+	cancel_delayed_work_sync(&qdev->mpi_idc_work);
 	ql_soft_reset_mpi_risc(qdev);
 }