sfc: Refactor link configuration

Refactor PHY, MAC and NIC configuration operations so that the
existing link configuration can be re-pushed with:

	efx->phy_op->reconfigure(efx);
	efx->mac_op->reconfigure(efx);

and a new configuration with:

	efx->nic_op->reconfigure_port(efx);

(plus locking and error-checking).

We have not held the link settings in software (aside from flow
control), and have relied on asking the hardware what they are.  This
is a problem because in some cases the hardware may no longer be in a
state to tell us.  In particular, if an entire multi-port board is
reset through one port, the driver bindings to other ports have no
chance to save settings before recovering.

We only actually need to keep track of the autonegotiation settings,
so add an ethtool advertising mask to struct efx_nic, initialise it
in PHY init and update it as necessary.

Remove now-unneeded uses of efx_phy_op::{get,set}_settings() and
struct ethtool_cmd.

Much of this was done by Steve Hodgson <shodgson@solarflare.com>.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 80 insertions, 52 deletions

diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
index 73ab246d9f2a..4210121eeff9 100644
--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -620,16 +620,49 @@ void efx_link_status_changed(struct efx_nic *efx)
 
 }
 
+void efx_link_set_advertising(struct efx_nic *efx, u32 advertising)
+{
+	efx->link_advertising = advertising;
+	if (advertising) {
+		if (advertising & ADVERTISED_Pause)
+			efx->wanted_fc |= (EFX_FC_TX | EFX_FC_RX);
+		else
+			efx->wanted_fc &= ~(EFX_FC_TX | EFX_FC_RX);
+		if (advertising & ADVERTISED_Asym_Pause)
+			efx->wanted_fc ^= EFX_FC_TX;
+	}
+}
+
+void efx_link_set_wanted_fc(struct efx_nic *efx, enum efx_fc_type wanted_fc)
+{
+	efx->wanted_fc = wanted_fc;
+	if (efx->link_advertising) {
+		if (wanted_fc & EFX_FC_RX)
+			efx->link_advertising |= (ADVERTISED_Pause |
+						  ADVERTISED_Asym_Pause);
+		else
+			efx->link_advertising &= ~(ADVERTISED_Pause |
+						   ADVERTISED_Asym_Pause);
+		if (wanted_fc & EFX_FC_TX)
+			efx->link_advertising ^= ADVERTISED_Asym_Pause;
+	}
+}
+
 static void efx_fini_port(struct efx_nic *efx);
 
-/* This call reinitialises the MAC to pick up new PHY settings. The
- * caller must hold the mac_lock */
-void __efx_reconfigure_port(struct efx_nic *efx)
+/* Push loopback/power/transmit disable settings to the PHY, and reconfigure
+ * the MAC appropriately. All other PHY configuration changes are pushed
+ * through phy_op->set_settings(), and pushed asynchronously to the MAC
+ * through efx_monitor().
+ *
+ * Callers must hold the mac_lock
+ */
+int __efx_reconfigure_port(struct efx_nic *efx)
 {
-	WARN_ON(!mutex_is_locked(&efx->mac_lock));
+	enum efx_phy_mode phy_mode;
+	int rc;
 
-	EFX_LOG(efx, "reconfiguring MAC from PHY settings on CPU %d\n",
-		raw_smp_processor_id());
+	WARN_ON(!mutex_is_locked(&efx->mac_lock));
 
 	/* Serialise the promiscuous flag with efx_set_multicast_list. */
 	if (efx_dev_registered(efx)) {
@@ -637,42 +670,34 @@ void __efx_reconfigure_port(struct efx_nic *efx)
 		netif_addr_unlock_bh(efx->net_dev);
 	}
 
-	efx->type->stop_stats(efx);
-	falcon_deconfigure_mac_wrapper(efx);
-
-	/* Reconfigure the PHY, disabling transmit in mac level loopback. */
+	/* Disable PHY transmit in mac level loopbacks */
+	phy_mode = efx->phy_mode;
 	if (LOOPBACK_INTERNAL(efx))
 		efx->phy_mode |= PHY_MODE_TX_DISABLED;
 	else
 		efx->phy_mode &= ~PHY_MODE_TX_DISABLED;
-	efx->phy_op->reconfigure(efx);
-
-	if (falcon_switch_mac(efx))
-		goto fail;
 
-	efx->mac_op->reconfigure(efx);
+	rc = efx->type->reconfigure_port(efx);
 
-	efx->type->start_stats(efx);
-
-	/* Inform kernel of loss/gain of carrier */
-	efx_link_status_changed(efx);
-	return;
+	if (rc)
+		efx->phy_mode = phy_mode;
 
-fail:
-	EFX_ERR(efx, "failed to reconfigure MAC\n");
-	efx->port_enabled = false;
-	efx_fini_port(efx);
+	return rc;
 }
 
 /* Reinitialise the MAC to pick up new PHY settings, even if the port is
  * disabled. */
-void efx_reconfigure_port(struct efx_nic *efx)
+int efx_reconfigure_port(struct efx_nic *efx)
 {
+	int rc;
+
 	EFX_ASSERT_RESET_SERIALISED(efx);
 
 	mutex_lock(&efx->mac_lock);
-	__efx_reconfigure_port(efx);
+	rc = __efx_reconfigure_port(efx);
 	mutex_unlock(&efx->mac_lock);
+
+	return rc;
 }
 
 /* Asynchronous work item for changing MAC promiscuity and multicast
@@ -737,14 +762,18 @@ static int efx_init_port(struct efx_nic *efx)
 	rc = efx->phy_op->init(efx);
 	if (rc)
 		goto fail1;
-	efx->phy_op->reconfigure(efx);
-	rc = falcon_switch_mac(efx);
-	if (rc)
-		goto fail2;
-	efx->mac_op->reconfigure(efx);
 
 	efx->port_initialized = true;
 
+	/* Reconfigure the MAC before creating dma queues (required for
+	 * Falcon/A1 where RX_INGR_EN/TX_DRAIN_EN isn't supported) */
+	efx->mac_op->reconfigure(efx);
+
+	/* Ensure the PHY advertises the correct flow control settings */
+	rc = efx->phy_op->reconfigure(efx);
+	if (rc)
+		goto fail2;
+
 	mutex_unlock(&efx->mac_lock);
 	return 0;
 
@@ -1209,12 +1238,6 @@ static void efx_stop_all(struct efx_nic *efx)
 	/* Flush efx_mac_work(), refill_workqueue, monitor_work */
 	efx_flush_all(efx);
 
-	/* Isolate the MAC from the TX and RX engines, so that queue
-	 * flushes will complete in a timely fashion. */
-	falcon_deconfigure_mac_wrapper(efx);
-	msleep(10); /* Let the Rx FIFO drain */
-	falcon_drain_tx_fifo(efx);
-
 	/* Stop the kernel transmit interface late, so the watchdog
 	 * timer isn't ticking over the flush */
 	if (efx_dev_registered(efx)) {
@@ -1491,7 +1514,14 @@ static int efx_change_mtu(struct net_device *net_dev, int new_mtu)
 	EFX_LOG(efx, "changing MTU to %d\n", new_mtu);
 
 	efx_fini_channels(efx);
+
+	mutex_lock(&efx->mac_lock);
+	/* Reconfigure the MAC before enabling the dma queues so that
+	 * the RX buffers don't overflow */
 	net_dev->mtu = new_mtu;
+	efx->mac_op->reconfigure(efx);
+	mutex_unlock(&efx->mac_lock);
+
 	efx_init_channels(efx);
 
 	efx_start_all(efx);
@@ -1515,7 +1545,9 @@ static int efx_set_mac_address(struct net_device *net_dev, void *data)
 	memcpy(net_dev->dev_addr, new_addr, net_dev->addr_len);
 
 	/* Reconfigure the MAC */
-	efx_reconfigure_port(efx);
+	mutex_lock(&efx->mac_lock);
+	efx->mac_op->reconfigure(efx);
+	mutex_unlock(&efx->mac_lock);
 
 	return 0;
 }
@@ -1682,8 +1714,7 @@ static void efx_unregister_netdev(struct efx_nic *efx)
 
 /* Tears down the entire software state and most of the hardware state
  * before reset.  */
-void efx_reset_down(struct efx_nic *efx, enum reset_type method,
-		    struct ethtool_cmd *ecmd)
+void efx_reset_down(struct efx_nic *efx, enum reset_type method)
 {
 	EFX_ASSERT_RESET_SERIALISED(efx);
 
@@ -1691,8 +1722,6 @@ void efx_reset_down(struct efx_nic *efx, enum reset_type method,
 	mutex_lock(&efx->mac_lock);
 	mutex_lock(&efx->spi_lock);
 
-	efx->phy_op->get_settings(efx, ecmd);
-
 	efx_fini_channels(efx);
 	if (efx->port_initialized && method != RESET_TYPE_INVISIBLE)
 		efx->phy_op->fini(efx);
@@ -1704,8 +1733,7 @@ void efx_reset_down(struct efx_nic *efx, enum reset_type method,
  * that we were unable to reinitialise the hardware, and the
  * driver should be disabled. If ok is false, then the rx and tx
  * engines are not restarted, pending a RESET_DISABLE. */
-int efx_reset_up(struct efx_nic *efx, enum reset_type method,
-		 struct ethtool_cmd *ecmd, bool ok)
+int efx_reset_up(struct efx_nic *efx, enum reset_type method, bool ok)
 {
 	int rc;
 
@@ -1722,16 +1750,17 @@ int efx_reset_up(struct efx_nic *efx, enum reset_type method,
 			rc = efx->phy_op->init(efx);
 			if (rc)
 				ok = false;
+			if (efx->phy_op->reconfigure(efx))
+				EFX_ERR(efx, "could not restore PHY settings\n");
 		}
 		if (!ok)
 			efx->port_initialized = false;
 	}
 
 	if (ok) {
-		efx_init_channels(efx);
+		efx->mac_op->reconfigure(efx);
 
-		if (efx->phy_op->set_settings(efx, ecmd))
-			EFX_ERR(efx, "could not restore PHY settings\n");
+		efx_init_channels(efx);
 	}
 
 	mutex_unlock(&efx->spi_lock);
@@ -1753,7 +1782,6 @@ int efx_reset_up(struct efx_nic *efx, enum reset_type method,
  */
 static int efx_reset(struct efx_nic *efx)
 {
-	struct ethtool_cmd ecmd;
 	enum reset_type method = efx->reset_pending;
 	int rc = 0;
 
@@ -1769,7 +1797,7 @@ static int efx_reset(struct efx_nic *efx)
 
 	EFX_INFO(efx, "resetting (%s)\n", RESET_TYPE(method));
 
-	efx_reset_down(efx, method, &ecmd);
+	efx_reset_down(efx, method);
 
 	rc = efx->type->reset(efx, method);
 	if (rc) {
@@ -1788,10 +1816,10 @@ static int efx_reset(struct efx_nic *efx)
 
 	/* Leave device stopped if necessary */
 	if (method == RESET_TYPE_DISABLE) {
-		efx_reset_up(efx, method, &ecmd, false);
+		efx_reset_up(efx, method, false);
 		rc = -EIO;
 	} else {
-		rc = efx_reset_up(efx, method, &ecmd, true);
+		rc = efx_reset_up(efx, method, true);
 	}
 
 out_disable:
@@ -1895,7 +1923,7 @@ bool efx_port_dummy_op_poll(struct efx_nic *efx)
 
 static struct efx_phy_operations efx_dummy_phy_operations = {
 	.init		 = efx_port_dummy_op_int,
-	.reconfigure	 = efx_port_dummy_op_void,
+	.reconfigure	 = efx_port_dummy_op_int,
 	.poll		 = efx_port_dummy_op_poll,
 	.fini		 = efx_port_dummy_op_void,
 };