diff options
author | Jeff Garzik <jeff@garzik.org> | 2006-04-20 23:39:14 +0200 |
---|---|---|
committer | Jeff Garzik <jeff@garzik.org> | 2006-04-20 23:39:14 +0200 |
commit | d5498bef6fcd8ca0e4579eeb0b0d724f20221bb1 (patch) | |
tree | c95370d6526d60886731924cf2d467701006df13 /drivers/net/smc911x.c | |
parent | [PATCH] RE: [PATCH 1/1] net driver: Add support for SMSC LAN911x line of ethe... (diff) | |
download | linux-d5498bef6fcd8ca0e4579eeb0b0d724f20221bb1.tar.xz linux-d5498bef6fcd8ca0e4579eeb0b0d724f20221bb1.zip |
[netdrvr smc911x] trim trailing whitespace
Diffstat (limited to 'drivers/net/smc911x.c')
-rw-r--r-- | drivers/net/smc911x.c | 210 |
1 files changed, 105 insertions, 105 deletions
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index b3b0d360da14..bdd8702ead54 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -4,7 +4,7 @@ * * Copyright (C) 2005 Sensoria Corp * Derived from the unified SMC91x driver by Nicolas Pitre - * and the smsc911x.c reference driver by SMSC + * and the smsc911x.c reference driver by SMSC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -113,7 +113,7 @@ MODULE_LICENSE("GPL"); struct smc911x_local { /* * If I have to wait until the DMA is finished and ready to reload a - * packet, I will store the skbuff here. Then, the DMA will send it + * packet, I will store the skbuff here. Then, the DMA will send it * out and free it. */ struct sk_buff *pending_tx_skb; @@ -246,7 +246,7 @@ static void smc911x_reset(struct net_device *dev) /* Take out of PM setting first */ if ((SMC_GET_PMT_CTRL() & PMT_CTRL_READY_) == 0) { /* Write to the bytetest will take out of powerdown */ - SMC_SET_BYTE_TEST(0); + SMC_SET_BYTE_TEST(0); timeout=10; do { udelay(10); @@ -306,9 +306,9 @@ static void smc911x_reset(struct net_device *dev) /* Set to LED outputs */ SMC_SET_GPIO_CFG(0x70070000); - /* + /* * Deassert IRQ for 1*10us for edge type interrupts - * and drive IRQ pin push-pull + * and drive IRQ pin push-pull */ SMC_SET_IRQ_CFG( (1 << 24) | INT_CFG_IRQ_EN_ | INT_CFG_IRQ_TYPE_ ); @@ -368,8 +368,8 @@ static void smc911x_enable(struct net_device *dev) SMC_SET_FIFO_RSL(0x00); /* now, enable interrupts */ - mask = INT_EN_TDFA_EN_ | INT_EN_TSFL_EN_ | INT_EN_RSFL_EN_ | - INT_EN_GPT_INT_EN_ | INT_EN_RXDFH_INT_EN_ | INT_EN_RXE_EN_ | + mask = INT_EN_TDFA_EN_ | INT_EN_TSFL_EN_ | INT_EN_RSFL_EN_ | + INT_EN_GPT_INT_EN_ | INT_EN_RXDFH_INT_EN_ | INT_EN_RXE_EN_ | INT_EN_PHY_INT_EN_; if (IS_REV_A(lp->revision)) mask|=INT_EN_RDFL_EN_; @@ -404,12 +404,12 @@ static void smc911x_shutdown(struct net_device *dev) } static inline void smc911x_drop_pkt(struct net_device *dev) -{ +{ unsigned long ioaddr = dev->base_addr; unsigned int fifo_count, timeout, reg; DBG(SMC_DEBUG_FUNC | SMC_DEBUG_RX, "%s: --> %s\n", CARDNAME, __FUNCTION__); - fifo_count = SMC_GET_RX_FIFO_INF() & 0xFFFF; + fifo_count = SMC_GET_RX_FIFO_INF() & 0xFFFF; if (fifo_count <= 4) { /* Manually dump the packet data */ while (fifo_count--) @@ -431,7 +431,7 @@ static inline void smc911x_drop_pkt(struct net_device *dev) /* * This is the procedure to handle the receipt of a packet. * It should be called after checking for packet presence in - * the RX status FIFO. It must be called with the spin lock + * the RX status FIFO. It must be called with the spin lock * already held. */ static inline void smc911x_rcv(struct net_device *dev) @@ -442,21 +442,21 @@ static inline void smc911x_rcv(struct net_device *dev) struct sk_buff *skb; unsigned char *data; - DBG(SMC_DEBUG_FUNC | SMC_DEBUG_RX, "%s: --> %s\n", + DBG(SMC_DEBUG_FUNC | SMC_DEBUG_RX, "%s: --> %s\n", dev->name, __FUNCTION__); status = SMC_GET_RX_STS_FIFO(); - DBG(SMC_DEBUG_RX, "%s: Rx pkt len %d status 0x%08x \n", + DBG(SMC_DEBUG_RX, "%s: Rx pkt len %d status 0x%08x \n", dev->name, (status & 0x3fff0000) >> 16, status & 0xc000ffff); pkt_len = (status & RX_STS_PKT_LEN_) >> 16; - if (status & RX_STS_ES_) { + if (status & RX_STS_ES_) { /* Deal with a bad packet */ lp->stats.rx_errors++; - if (status & RX_STS_CRC_ERR_) + if (status & RX_STS_CRC_ERR_) lp->stats.rx_crc_errors++; else { if (status & RX_STS_LEN_ERR_) lp->stats.rx_length_errors++; - if (status & RX_STS_MCAST_) + if (status & RX_STS_MCAST_) lp->stats.multicast++; } /* Remove the bad packet data from the RX FIFO */ @@ -472,9 +472,9 @@ static inline void smc911x_rcv(struct net_device *dev) smc911x_drop_pkt(dev); return; } - /* Align IP header to 32 bits + /* Align IP header to 32 bits * Note that the device is configured to add a 2 - * byte padding to the packet start, so we really + * byte padding to the packet start, so we really * want to write to the orignal data pointer */ data = skb->data; skb_reserve(skb, 2); @@ -529,25 +529,25 @@ static void smc911x_hardware_send_pkt(struct net_device *dev) skb = lp->pending_tx_skb; lp->pending_tx_skb = NULL; - /* cmdA {25:24] data alignment [20:16] start offset [10:0] buffer length */ - /* cmdB {31:16] pkt tag [10:0] length */ + /* cmdA {25:24] data alignment [20:16] start offset [10:0] buffer length */ + /* cmdB {31:16] pkt tag [10:0] length */ #ifdef SMC_USE_DMA /* 16 byte buffer alignment mode */ buf = (char*)((u32)(skb->data) & ~0xF); - len = (skb->len + 0xF + ((u32)skb->data & 0xF)) & ~0xF; + len = (skb->len + 0xF + ((u32)skb->data & 0xF)) & ~0xF; cmdA = (1<<24) | (((u32)skb->data & 0xF)<<16) | TX_CMD_A_INT_FIRST_SEG_ | TX_CMD_A_INT_LAST_SEG_ | skb->len; #else buf = (char*)((u32)skb->data & ~0x3); - len = (skb->len + 3 + ((u32)skb->data & 3)) & ~0x3; + len = (skb->len + 3 + ((u32)skb->data & 3)) & ~0x3; cmdA = (((u32)skb->data & 0x3) << 16) | TX_CMD_A_INT_FIRST_SEG_ | TX_CMD_A_INT_LAST_SEG_ | skb->len; #endif - /* tag is packet length so we can use this in stats update later */ + /* tag is packet length so we can use this in stats update later */ cmdB = (skb->len << 16) | (skb->len & 0x7FF); - + DBG(SMC_DEBUG_TX, "%s: TX PKT LENGTH 0x%04x (%d) BUF 0x%p CMDA 0x%08x CMDB 0x%08x\n", dev->name, len, len, buf, cmdA, cmdB); SMC_SET_TX_FIFO(cmdA); @@ -587,7 +587,7 @@ static int smc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) unsigned int free; unsigned long flags; - DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, "%s: --> %s\n", + DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, "%s: --> %s\n", dev->name, __FUNCTION__); BUG_ON(lp->pending_tx_skb != NULL); @@ -597,7 +597,7 @@ static int smc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) /* Turn off the flow when running out of space in FIFO */ if (free <= SMC911X_TX_FIFO_LOW_THRESHOLD) { - DBG(SMC_DEBUG_TX, "%s: Disabling data flow due to low FIFO space (%d)\n", + DBG(SMC_DEBUG_TX, "%s: Disabling data flow due to low FIFO space (%d)\n", dev->name, free); spin_lock_irqsave(&lp->lock, flags); /* Reenable when at least 1 packet of size MTU present */ @@ -607,15 +607,15 @@ static int smc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) spin_unlock_irqrestore(&lp->lock, flags); } - /* Drop packets when we run out of space in TX FIFO + /* Drop packets when we run out of space in TX FIFO * Account for overhead required for: - * - * Tx command words 8 bytes + * + * Tx command words 8 bytes * Start offset 15 bytes * End padding 15 bytes - */ + */ if (unlikely(free < (skb->len + 8 + 15 + 15))) { - printk("%s: No Tx free space %d < %d\n", + printk("%s: No Tx free space %d < %d\n", dev->name, free, skb->len); lp->pending_tx_skb = NULL; lp->stats.tx_errors++; @@ -623,11 +623,11 @@ static int smc911x_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) dev_kfree_skb(skb); return 0; } - + #ifdef SMC_USE_DMA { /* If the DMA is already running then defer this packet Tx until - * the DMA IRQ starts it + * the DMA IRQ starts it */ spin_lock_irqsave(&lp->lock, flags); if (lp->txdma_active) { @@ -660,23 +660,23 @@ static void smc911x_tx(struct net_device *dev) struct smc911x_local *lp = netdev_priv(dev); unsigned int tx_status; - DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, "%s: --> %s\n", + DBG(SMC_DEBUG_FUNC | SMC_DEBUG_TX, "%s: --> %s\n", dev->name, __FUNCTION__); /* Collect the TX status */ while (((SMC_GET_TX_FIFO_INF() & TX_FIFO_INF_TSUSED_) >> 16) != 0) { - DBG(SMC_DEBUG_TX, "%s: Tx stat FIFO used 0x%04x\n", - dev->name, + DBG(SMC_DEBUG_TX, "%s: Tx stat FIFO used 0x%04x\n", + dev->name, (SMC_GET_TX_FIFO_INF() & TX_FIFO_INF_TSUSED_) >> 16); tx_status = SMC_GET_TX_STS_FIFO(); lp->stats.tx_packets++; lp->stats.tx_bytes+=tx_status>>16; - DBG(SMC_DEBUG_TX, "%s: Tx FIFO tag 0x%04x status 0x%04x\n", - dev->name, (tx_status & 0xffff0000) >> 16, + DBG(SMC_DEBUG_TX, "%s: Tx FIFO tag 0x%04x status 0x%04x\n", + dev->name, (tx_status & 0xffff0000) >> 16, tx_status & 0x0000ffff); - /* count Tx errors, but ignore lost carrier errors when in + /* count Tx errors, but ignore lost carrier errors when in * full-duplex mode */ - if ((tx_status & TX_STS_ES_) && !(lp->ctl_rfduplx && + if ((tx_status & TX_STS_ES_) && !(lp->ctl_rfduplx && !(tx_status & 0x00000306))) { lp->stats.tx_errors++; } @@ -687,10 +687,10 @@ static void smc911x_tx(struct net_device *dev) lp->stats.collisions+=(tx_status & TX_STS_COLL_CNT_) >> 3; } /* carrier error only has meaning for half-duplex communication */ - if ((tx_status & (TX_STS_LOC_ | TX_STS_NO_CARR_)) && + if ((tx_status & (TX_STS_LOC_ | TX_STS_NO_CARR_)) && !lp->ctl_rfduplx) { lp->stats.tx_carrier_errors++; - } + } if (tx_status & TX_STS_LATE_COLL_) { lp->stats.collisions++; lp->stats.tx_aborted_errors++; @@ -753,7 +753,7 @@ static void smc911x_phy_detect(struct net_device *dev) switch(lp->version) { case 0x115: case 0x117: - cfg = SMC_GET_HW_CFG(); + cfg = SMC_GET_HW_CFG(); if (cfg & HW_CFG_EXT_PHY_DET_) { cfg &= ~HW_CFG_PHY_CLK_SEL_; cfg |= HW_CFG_PHY_CLK_SEL_CLK_DIS_; @@ -779,8 +779,8 @@ static void smc911x_phy_detect(struct net_device *dev) SMC_GET_PHY_ID2(phyaddr & 31, id2); /* Make sure it is a valid identifier */ - if (id1 != 0x0000 && id1 != 0xffff && - id1 != 0x8000 && id2 != 0x0000 && + if (id1 != 0x0000 && id1 != 0xffff && + id1 != 0x8000 && id2 != 0x0000 && id2 != 0xffff && id2 != 0x8000) { /* Save the PHY's address */ lp->mii.phy_id = phyaddr & 31; @@ -875,9 +875,9 @@ static int smc911x_phy_reset(struct net_device *dev, int phy) reg = SMC_GET_PMT_CTRL(); spin_unlock_irqrestore(&lp->lock, flags); if (!(reg & PMT_CTRL_PHY_RST_)) { - /* extra delay required because the phy may + /* extra delay required because the phy may * not be completed with its reset - * when PHY_BCR_RESET_ is cleared. 256us + * when PHY_BCR_RESET_ is cleared. 256us * should suffice, but use 500us to be safe */ udelay(500); @@ -1064,9 +1064,9 @@ static void smc911x_phy_interrupt(struct net_device *dev) smc911x_phy_check_media(dev, 0); /* read to clear status bits */ SMC_GET_PHY_INT_SRC(phyaddr,status); - DBG(SMC_DEBUG_MISC, "%s: PHY interrupt status 0x%04x\n", + DBG(SMC_DEBUG_MISC, "%s: PHY interrupt status 0x%04x\n", dev->name, status & 0xffff); - DBG(SMC_DEBUG_MISC, "%s: AFC_CFG 0x%08x\n", + DBG(SMC_DEBUG_MISC, "%s: AFC_CFG 0x%08x\n", dev->name, SMC_GET_AFC_CFG()); } @@ -1121,7 +1121,7 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id, struct pt_regs *regs if (status & INT_STS_RXE_) { SMC_ACK_INT(INT_STS_RXE_); lp->stats.rx_errors++; - } + } if (status & INT_STS_RXDFH_INT_) { SMC_ACK_INT(INT_STS_RXDFH_INT_); lp->stats.rx_dropped+=SMC_GET_RX_DROP(); @@ -1160,20 +1160,20 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id, struct pt_regs *regs if ((status & INT_STS_RSFL_) || rx_overrun) { unsigned int fifo; DBG(SMC_DEBUG_RX, "%s: RX irq\n", dev->name); - fifo = SMC_GET_RX_FIFO_INF(); - pkts = (fifo & RX_FIFO_INF_RXSUSED_) >> 16; - DBG(SMC_DEBUG_RX, "%s: Rx FIFO pkts %d, bytes %d\n", + fifo = SMC_GET_RX_FIFO_INF(); + pkts = (fifo & RX_FIFO_INF_RXSUSED_) >> 16; + DBG(SMC_DEBUG_RX, "%s: Rx FIFO pkts %d, bytes %d\n", dev->name, pkts, fifo & 0xFFFF ); if (pkts != 0) { #ifdef SMC_USE_DMA unsigned int fifo; if (lp->rxdma_active){ - DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA, + DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA, "%s: RX DMA active\n", dev->name); /* The DMA is already running so up the IRQ threshold */ fifo = SMC_GET_FIFO_INT() & ~0xFF; fifo |= pkts & 0xFF; - DBG(SMC_DEBUG_RX, + DBG(SMC_DEBUG_RX, "%s: Setting RX stat FIFO threshold to %d\n", dev->name, fifo & 0xff); SMC_SET_FIFO_INT(fifo); @@ -1197,8 +1197,8 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id, struct pt_regs *regs /* Handle transmit done condition */ #if 1 if (status & (INT_STS_TSFL_ | INT_STS_GPT_INT_)) { - DBG(SMC_DEBUG_TX | SMC_DEBUG_MISC, - "%s: Tx stat FIFO limit (%d) /GPT irq\n", + DBG(SMC_DEBUG_TX | SMC_DEBUG_MISC, + "%s: Tx stat FIFO limit (%d) /GPT irq\n", dev->name, (SMC_GET_FIFO_INT() & 0x00ff0000) >> 16); smc911x_tx(dev); SMC_SET_GPT_CFG(GPT_CFG_TIMER_EN_ | 10000); @@ -1213,16 +1213,16 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id, struct pt_regs *regs } if (status & INT_STS_GPT_INT_) { - DBG(SMC_DEBUG_RX, "%s: IRQ_CFG 0x%08x FIFO_INT 0x%08x RX_CFG 0x%08x\n", - dev->name, - SMC_GET_IRQ_CFG(), - SMC_GET_FIFO_INT(), + DBG(SMC_DEBUG_RX, "%s: IRQ_CFG 0x%08x FIFO_INT 0x%08x RX_CFG 0x%08x\n", + dev->name, + SMC_GET_IRQ_CFG(), + SMC_GET_FIFO_INT(), SMC_GET_RX_CFG()); DBG(SMC_DEBUG_RX, "%s: Rx Stat FIFO Used 0x%02x " "Data FIFO Used 0x%04x Stat FIFO 0x%08x\n", - dev->name, - (SMC_GET_RX_FIFO_INF() & 0x00ff0000) >> 16, - SMC_GET_RX_FIFO_INF() & 0xffff, + dev->name, + (SMC_GET_RX_FIFO_INF() & 0x00ff0000) >> 16, + SMC_GET_RX_FIFO_INF() & 0xffff, SMC_GET_RX_STS_FIFO_PEEK()); SMC_SET_GPT_CFG(GPT_CFG_TIMER_EN_ | 10000); SMC_ACK_INT(INT_STS_GPT_INT_); @@ -1240,7 +1240,7 @@ static irqreturn_t smc911x_interrupt(int irq, void *dev_id, struct pt_regs *regs /* restore mask state */ SMC_SET_INT_EN(mask); - DBG(SMC_DEBUG_MISC, "%s: Interrupt done (%d loops)\n", + DBG(SMC_DEBUG_MISC, "%s: Interrupt done (%d loops)\n", dev->name, 8-timeout); spin_unlock_irqrestore(&lp->lock, flags); @@ -1272,7 +1272,7 @@ smc911x_tx_dma_irq(int dma, void *data, struct pt_regs *regs) if (lp->pending_tx_skb != NULL) smc911x_hardware_send_pkt(dev); else { - DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, + DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, "%s: No pending Tx packets. DMA disabled\n", dev->name); spin_lock_irqsave(&lp->lock, flags); lp->txdma_active = 0; @@ -1282,7 +1282,7 @@ smc911x_tx_dma_irq(int dma, void *data, struct pt_regs *regs) spin_unlock_irqrestore(&lp->lock, flags); } - DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, + DBG(SMC_DEBUG_TX | SMC_DEBUG_DMA, "%s: TX DMA irq completed\n", dev->name); } static void @@ -1311,15 +1311,15 @@ smc911x_rx_dma_irq(int dma, void *data, struct pt_regs *regs) lp->stats.rx_bytes += skb->len; spin_lock_irqsave(&lp->lock, flags); - pkts = (SMC_GET_RX_FIFO_INF() & RX_FIFO_INF_RXSUSED_) >> 16; + pkts = (SMC_GET_RX_FIFO_INF() & RX_FIFO_INF_RXSUSED_) >> 16; if (pkts != 0) { smc911x_rcv(dev); }else { lp->rxdma_active = 0; } spin_unlock_irqrestore(&lp->lock, flags); - DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA, - "%s: RX DMA irq completed. DMA RX FIFO PKTS %d\n", + DBG(SMC_DEBUG_RX | SMC_DEBUG_DMA, + "%s: RX DMA irq completed. DMA RX FIFO PKTS %d\n", dev->name, pkts); } #endif /* SMC_USE_DMA */ @@ -1355,8 +1355,8 @@ static void smc911x_timeout(struct net_device *dev) dev->name, status, mask); /* Dump the current TX FIFO contents and restart */ - mask = SMC_GET_TX_CFG(); - SMC_SET_TX_CFG(mask | TX_CFG_TXS_DUMP_ | TX_CFG_TXD_DUMP_); + mask = SMC_GET_TX_CFG(); + SMC_SET_TX_CFG(mask | TX_CFG_TXS_DUMP_ | TX_CFG_TXD_DUMP_); /* * Reconfiguring the PHY doesn't seem like a bad idea here, but * smc911x_phy_configure() calls msleep() which calls schedule_timeout() @@ -1387,7 +1387,7 @@ static void smc911x_set_multicast_list(struct net_device *dev) unsigned int mcr, update_multicast = 0; unsigned long flags; /* table for flipping the order of 5 bits */ - static const unsigned char invert5[] = + static const unsigned char invert5[] = {0x00, 0x10, 0x08, 0x18, 0x04, 0x14, 0x0C, 0x1C, 0x02, 0x12, 0x0A, 0x1A, 0x06, 0x16, 0x0E, 0x1E, 0x01, 0x11, 0x09, 0x19, 0x05, 0x15, 0x0D, 0x1D, @@ -1463,7 +1463,7 @@ static void smc911x_set_multicast_list(struct net_device *dev) /* now, the table can be loaded into the chipset */ update_multicast = 1; } else { - DBG(SMC_DEBUG_MISC, "%s: ~(MAC_CR_PRMS_|MAC_CR_MCPAS_)\n", + DBG(SMC_DEBUG_MISC, "%s: ~(MAC_CR_PRMS_|MAC_CR_MCPAS_)\n", dev->name); mcr &= ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_); @@ -1478,8 +1478,8 @@ static void smc911x_set_multicast_list(struct net_device *dev) spin_lock_irqsave(&lp->lock, flags); SMC_SET_MAC_CR(mcr); if (update_multicast) { - DBG(SMC_DEBUG_MISC, - "%s: update mcast hash table 0x%08x 0x%08x\n", + DBG(SMC_DEBUG_MISC, + "%s: update mcast hash table 0x%08x 0x%08x\n", dev->name, multicast_table[0], multicast_table[1]); SMC_SET_HASHL(multicast_table[0]); SMC_SET_HASHH(multicast_table[1]); @@ -1614,8 +1614,8 @@ smc911x_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd) cmd->transceiver = XCVR_EXTERNAL; cmd->port = 0; SMC_GET_PHY_SPECIAL(lp->mii.phy_id, status); - cmd->duplex = - (status & (PHY_SPECIAL_SPD_10FULL_ | PHY_SPECIAL_SPD_100FULL_)) ? + cmd->duplex = + (status & (PHY_SPECIAL_SPD_10FULL_ | PHY_SPECIAL_SPD_100FULL_)) ? DUPLEX_FULL : DUPLEX_HALF; ret = 0; } @@ -1687,11 +1687,11 @@ static void smc911x_ethtool_setmsglevel(struct net_device *dev, u32 level) static int smc911x_ethtool_getregslen(struct net_device *dev) { /* System regs + MAC regs + PHY regs */ - return (((E2P_CMD - ID_REV)/4 + 1) + - (WUCSR - MAC_CR)+1 + 32) * sizeof(u32); + return (((E2P_CMD - ID_REV)/4 + 1) + + (WUCSR - MAC_CR)+1 + 32) * sizeof(u32); } -static void smc911x_ethtool_getregs(struct net_device *dev, +static void smc911x_ethtool_getregs(struct net_device *dev, struct ethtool_regs* regs, void *buf) { unsigned long ioaddr = dev->base_addr; @@ -1702,19 +1702,19 @@ static void smc911x_ethtool_getregs(struct net_device *dev, regs->version = lp->version; for(i=ID_REV;i<=E2P_CMD;i+=4) { - data[j++] = SMC_inl(ioaddr,i); + data[j++] = SMC_inl(ioaddr,i); } for(i=MAC_CR;i<=WUCSR;i++) { spin_lock_irqsave(&lp->lock, flags); SMC_GET_MAC_CSR(i, reg); spin_unlock_irqrestore(&lp->lock, flags); - data[j++] = reg; + data[j++] = reg; } for(i=0;i<=31;i++) { spin_lock_irqsave(&lp->lock, flags); SMC_GET_MII(i, lp->mii.phy_id, reg); spin_unlock_irqrestore(&lp->lock, flags); - data[j++] = reg & 0xFFFF; + data[j++] = reg & 0xFFFF; } } @@ -1727,60 +1727,60 @@ static int smc911x_ethtool_wait_eeprom_ready(struct net_device *dev) e2p_cmd = SMC_GET_E2P_CMD(); for(timeout=10;(e2p_cmd & E2P_CMD_EPC_BUSY_) && timeout; timeout--) { if (e2p_cmd & E2P_CMD_EPC_TIMEOUT_) { - PRINTK("%s: %s timeout waiting for EEPROM to respond\n", + PRINTK("%s: %s timeout waiting for EEPROM to respond\n", dev->name, __FUNCTION__); return -EFAULT; - } + } mdelay(1); e2p_cmd = SMC_GET_E2P_CMD(); } if (timeout == 0) { - PRINTK("%s: %s timeout waiting for EEPROM CMD not busy\n", + PRINTK("%s: %s timeout waiting for EEPROM CMD not busy\n", dev->name, __FUNCTION__); return -ETIMEDOUT; } return 0; } -static inline int smc911x_ethtool_write_eeprom_cmd(struct net_device *dev, +static inline int smc911x_ethtool_write_eeprom_cmd(struct net_device *dev, int cmd, int addr) { unsigned long ioaddr = dev->base_addr; int ret; - if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0) + if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0) return ret; - SMC_SET_E2P_CMD(E2P_CMD_EPC_BUSY_ | - ((cmd) & (0x7<<28)) | + SMC_SET_E2P_CMD(E2P_CMD_EPC_BUSY_ | + ((cmd) & (0x7<<28)) | ((addr) & 0xFF)); return 0; } -static inline int smc911x_ethtool_read_eeprom_byte(struct net_device *dev, +static inline int smc911x_ethtool_read_eeprom_byte(struct net_device *dev, u8 *data) { unsigned long ioaddr = dev->base_addr; int ret; - if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0) + if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0) return ret; *data = SMC_GET_E2P_DATA(); return 0; } -static inline int smc911x_ethtool_write_eeprom_byte(struct net_device *dev, +static inline int smc911x_ethtool_write_eeprom_byte(struct net_device *dev, u8 data) { unsigned long ioaddr = dev->base_addr; int ret; - if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0) + if ((ret = smc911x_ethtool_wait_eeprom_ready(dev))!=0) return ret; SMC_SET_E2P_DATA(data); return 0; } -static int smc911x_ethtool_geteeprom(struct net_device *dev, +static int smc911x_ethtool_geteeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, u8 *data) { u8 eebuf[SMC911X_EEPROM_LEN]; @@ -1793,10 +1793,10 @@ static int smc911x_ethtool_geteeprom(struct net_device *dev, return ret; } memcpy(data, eebuf+eeprom->offset, eeprom->len); - return 0; + return 0; } -static int smc911x_ethtool_seteeprom(struct net_device *dev, +static int smc911x_ethtool_seteeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, u8 *data) { int i, ret; @@ -1953,7 +1953,7 @@ static int __init smc911x_probe(struct net_device *dev, unsigned long ioaddr) retval = -EINVAL; goto err_out; } - + /* fill in some of the fields */ dev->base_addr = ioaddr; lp->version = chip_ids[i].id; @@ -1965,7 +1965,7 @@ static int __init smc911x_probe(struct net_device *dev, unsigned long ioaddr) /* Set the automatic flow control values */ switch(lp->tx_fifo_kb) { - /* + /* * AFC_HI is about ((Rx Data Fifo Size)*2/3)/64 * AFC_LO is AFC_HI/2 * BACK_DUR is about 5uS*(AFC_LO) rounded down @@ -1990,7 +1990,7 @@ static int __init smc911x_probe(struct net_device *dev, unsigned long ioaddr) lp->afc_cfg=0x003C1E6F;break; case 11:/* 4800 Rx Data Fifo Size */ lp->afc_cfg=0x0032195F;break; - /* + /* * AFC_HI is ~1520 bytes less than RX Data Fifo Size * AFC_LO is AFC_HI/2 * BACK_DUR is about 5uS*(AFC_LO) rounded down @@ -2002,13 +2002,13 @@ static int __init smc911x_probe(struct net_device *dev, unsigned long ioaddr) case 14:/* 1920 Rx Data Fifo Size */ lp->afc_cfg=0x0006032F;break; default: - PRINTK("%s: ERROR -- no AFC_CFG setting found", + PRINTK("%s: ERROR -- no AFC_CFG setting found", dev->name); break; } - DBG(SMC_DEBUG_MISC | SMC_DEBUG_TX | SMC_DEBUG_RX, - "%s: tx_fifo %d rx_fifo %d afc_cfg 0x%08x\n", CARDNAME, + DBG(SMC_DEBUG_MISC | SMC_DEBUG_TX | SMC_DEBUG_RX, + "%s: tx_fifo %d rx_fifo %d afc_cfg 0x%08x\n", CARDNAME, lp->tx_fifo_size, lp->rx_fifo_size, lp->afc_cfg); spin_lock_init(&lp->lock); @@ -2129,7 +2129,7 @@ static int __init smc911x_probe(struct net_device *dev, unsigned long ioaddr) PRINTK("%s: External PHY 0x%08x\n", dev->name, lp->phy_type); } } - + err_out: #ifdef SMC_USE_DMA if (retval) { @@ -2292,7 +2292,7 @@ static struct platform_driver smc911x_driver = { .name = CARDNAME, }, }; - + static int __init smc911x_init(void) { return platform_driver_register(&smc911x_driver); |