diff options
author | Ingo Molnar <mingo@elte.hu> | 2009-06-17 12:52:15 +0200 |
---|---|---|
committer | Ingo Molnar <mingo@elte.hu> | 2009-06-17 12:56:49 +0200 |
commit | eadb8a091b27a840de7450f84ecff5ef13476424 (patch) | |
tree | 58c3782d40def63baa8167f3d31e3048cb4c7660 /drivers/net/smsc911x.c | |
parent | hw-breakpoints: fix undeclared ksym_tracer_mutex (diff) | |
parent | Merge branch 'next-i2c' of git://aeryn.fluff.org.uk/bjdooks/linux (diff) | |
download | linux-eadb8a091b27a840de7450f84ecff5ef13476424.tar.xz linux-eadb8a091b27a840de7450f84ecff5ef13476424.zip |
Merge branch 'linus' into tracing/hw-breakpoints
Conflicts:
arch/x86/Kconfig
arch/x86/kernel/traps.c
arch/x86/power/cpu.c
arch/x86/power/cpu_32.c
kernel/Makefile
Semantic conflict:
arch/x86/kernel/hw_breakpoint.c
Merge reason: Resolve the conflicts, move from put_cpu_no_sched() to
put_cpu() in arch/x86/kernel/hw_breakpoint.c.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Diffstat (limited to 'drivers/net/smsc911x.c')
-rw-r--r-- | drivers/net/smsc911x.c | 63 |
1 files changed, 61 insertions, 2 deletions
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c index eb7db032a780..b60639bd181b 100644 --- a/drivers/net/smsc911x.c +++ b/drivers/net/smsc911x.c @@ -47,6 +47,7 @@ #include <linux/bitops.h> #include <linux/irq.h> #include <linux/io.h> +#include <linux/swab.h> #include <linux/phy.h> #include <linux/smsc911x.h> #include "smsc911x.h" @@ -175,6 +176,12 @@ static inline void smsc911x_tx_writefifo(struct smsc911x_data *pdata, unsigned int *buf, unsigned int wordcount) { + if (pdata->config.flags & SMSC911X_SWAP_FIFO) { + while (wordcount--) + smsc911x_reg_write(pdata, TX_DATA_FIFO, swab32(*buf++)); + return; + } + if (pdata->config.flags & SMSC911X_USE_32BIT) { writesl(pdata->ioaddr + TX_DATA_FIFO, buf, wordcount); return; @@ -194,6 +201,12 @@ static inline void smsc911x_rx_readfifo(struct smsc911x_data *pdata, unsigned int *buf, unsigned int wordcount) { + if (pdata->config.flags & SMSC911X_SWAP_FIFO) { + while (wordcount--) + *buf++ = swab32(smsc911x_reg_read(pdata, RX_DATA_FIFO)); + return; + } + if (pdata->config.flags & SMSC911X_USE_32BIT) { readsl(pdata->ioaddr + RX_DATA_FIFO, buf, wordcount); return; @@ -1963,7 +1976,7 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev) retval = -ENODEV; goto out_0; } - res_size = res->end - res->start; + res_size = res->end - res->start + 1; irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (!irq_res) { @@ -2096,12 +2109,58 @@ out_0: return retval; } +#ifdef CONFIG_PM +/* This implementation assumes the devices remains powered on its VDDVARIO + * pins during suspend. */ + +static int smsc911x_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct smsc911x_data *pdata = netdev_priv(dev); + + /* enable wake on LAN, energy detection and the external PME + * signal. */ + smsc911x_reg_write(pdata, PMT_CTRL, + PMT_CTRL_PM_MODE_D1_ | PMT_CTRL_WOL_EN_ | + PMT_CTRL_ED_EN_ | PMT_CTRL_PME_EN_); + + return 0; +} + +static int smsc911x_resume(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct smsc911x_data *pdata = netdev_priv(dev); + unsigned int to = 100; + + /* Note 3.11 from the datasheet: + * "When the LAN9220 is in a power saving state, a write of any + * data to the BYTE_TEST register will wake-up the device." + */ + smsc911x_reg_write(pdata, BYTE_TEST, 0); + + /* poll the READY bit in PMT_CTRL. Any other access to the device is + * forbidden while this bit isn't set. Try for 100ms and return -EIO + * if it failed. */ + while (!(smsc911x_reg_read(pdata, PMT_CTRL) & PMT_CTRL_READY_) && --to) + udelay(1000); + + return (to == 0) ? -EIO : 0; +} + +#else +#define smsc911x_suspend NULL +#define smsc911x_resume NULL +#endif + static struct platform_driver smsc911x_driver = { .probe = smsc911x_drv_probe, - .remove = smsc911x_drv_remove, + .remove = __devexit_p(smsc911x_drv_remove), .driver = { .name = SMSC_CHIPNAME, }, + .suspend = smsc911x_suspend, + .resume = smsc911x_resume, }; /* Entry point for loading the module */ |