diff options
author | Matt Carlson <mcarlson@broadcom.com> | 2008-11-04 01:54:56 +0100 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2008-11-04 01:54:56 +0100 |
commit | 9c61d6bc56bf0a5fb1ebfcf4c168cc5ce30e153b (patch) | |
tree | 7e5f3e66d24b7456d98a5aa9f9a0ca3f0db63130 /drivers/net/tg3.c | |
parent | tg3: Allow WOL for phylib controlled Broadcom phys (diff) | |
download | linux-9c61d6bc56bf0a5fb1ebfcf4c168cc5ce30e153b.tar.xz linux-9c61d6bc56bf0a5fb1ebfcf4c168cc5ce30e153b.zip |
tg3: Refine phylib support
This patch refines the phylib support in the tg3 driver. The patch does
the following things :
* Rename tg3_mdio_config() to tg3_mdio_config_5785(). The 5785 will be
the only device that will use it so the name might as well reflect
that.
* Fix a memory leak if mdiobus_register() fails.
* Add code to deal with phy device detection failures.
* Add code to correct the supported list of phy features based on the
MAC <=> PHY interface.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to '')
-rw-r--r-- | drivers/net/tg3.c | 47 |
1 files changed, 35 insertions, 12 deletions
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index d0f314c6dbb0..03a930ef5d60 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -877,7 +877,7 @@ static int tg3_mdio_reset(struct mii_bus *bp) return 0; } -static void tg3_mdio_config(struct tg3 *tp) +static void tg3_mdio_config_5785(struct tg3 *tp) { u32 val; @@ -934,8 +934,9 @@ static void tg3_mdio_start(struct tg3 *tp) tw32_f(MAC_MI_MODE, tp->mi_mode); udelay(80); - if (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED) - tg3_mdio_config(tp); + if ((tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED) && + GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785) + tg3_mdio_config_5785(tp); } static void tg3_mdio_stop(struct tg3 *tp) @@ -989,14 +990,20 @@ static int tg3_mdio_init(struct tg3 *tp) if (i) { printk(KERN_WARNING "%s: mdiobus_reg failed (0x%x)\n", tp->dev->name, i); + mdiobus_free(tp->mdio_bus); return i; } - tp->tg3_flags3 |= TG3_FLG3_MDIOBUS_INITED; - phydev = tp->mdio_bus->phy_map[PHY_ADDR]; - switch (phydev->phy_id) { + if (!phydev || !phydev->drv) { + printk(KERN_WARNING "%s: No PHY devices\n", tp->dev->name); + mdiobus_unregister(tp->mdio_bus); + mdiobus_free(tp->mdio_bus); + return -ENODEV; + } + + switch (phydev->drv->phy_id & phydev->drv->phy_id_mask) { case TG3_PHY_ID_BCM50610: phydev->interface = PHY_INTERFACE_MODE_RGMII; if (tp->tg3_flags3 & TG3_FLG3_RGMII_STD_IBND_DISABLE) @@ -1011,7 +1018,10 @@ static int tg3_mdio_init(struct tg3 *tp) break; } - tg3_mdio_config(tp); + tp->tg3_flags3 |= TG3_FLG3_MDIOBUS_INITED; + + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785) + tg3_mdio_config_5785(tp); return 0; } @@ -1351,12 +1361,25 @@ static int tg3_phy_init(struct tg3 *tp) return PTR_ERR(phydev); } - tp->tg3_flags3 |= TG3_FLG3_PHY_CONNECTED; - /* Mask with MAC supported features. */ - phydev->supported &= (PHY_GBIT_FEATURES | - SUPPORTED_Pause | - SUPPORTED_Asym_Pause); + switch (phydev->interface) { + case PHY_INTERFACE_MODE_GMII: + case PHY_INTERFACE_MODE_RGMII: + phydev->supported &= (PHY_GBIT_FEATURES | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause); + break; + case PHY_INTERFACE_MODE_MII: + phydev->supported &= (PHY_BASIC_FEATURES | + SUPPORTED_Pause | + SUPPORTED_Asym_Pause); + break; + default: + phy_disconnect(tp->mdio_bus->phy_map[PHY_ADDR]); + return -EINVAL; + } + + tp->tg3_flags3 |= TG3_FLG3_PHY_CONNECTED; phydev->advertising = phydev->supported; |