tulip: Convert uses of KERN_DEBUG

Convert logging messages to more current styles.

Added -DDEBUG to Makefile to maintain current message logging.
This could be converted to a specific CONFIG_TULIP_DEBUG option.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 24 insertions, 25 deletions

diff --git a/drivers/net/tulip/media.c b/drivers/net/tulip/media.c
index a0c770ee4b64..4bd13922875d 100644
--- a/drivers/net/tulip/media.c
+++ b/drivers/net/tulip/media.c
@@ -182,8 +182,8 @@ void tulip_select_media(struct net_device *dev, int startup)
 		switch (mleaf->type) {
 		case 0:					/* 21140 non-MII xcvr. */
 			if (tulip_debug > 1)
-				printk(KERN_DEBUG "%s: Using a 21140 non-MII transceiver with control setting %02x\n",
-				       dev->name, p[1]);
+				netdev_dbg(dev, "Using a 21140 non-MII transceiver with control setting %02x\n",
+					   p[1]);
 			dev->if_port = p[0];
 			if (startup)
 				iowrite32(mtable->csr12dir | 0x100, ioaddr + CSR12);
@@ -204,15 +204,14 @@ void tulip_select_media(struct net_device *dev, int startup)
 				struct medialeaf *rleaf = &mtable->mleaf[mtable->has_reset];
 				unsigned char *rst = rleaf->leafdata;
 				if (tulip_debug > 1)
-					printk(KERN_DEBUG "%s: Resetting the transceiver\n",
-					       dev->name);
+					netdev_dbg(dev, "Resetting the transceiver\n");
 				for (i = 0; i < rst[0]; i++)
 					iowrite32(get_u16(rst + 1 + (i<<1)) << 16, ioaddr + CSR15);
 			}
 			if (tulip_debug > 1)
-				printk(KERN_DEBUG "%s: 21143 non-MII %s transceiver control %04x/%04x\n",
-				       dev->name, medianame[dev->if_port],
-				       setup[0], setup[1]);
+				netdev_dbg(dev, "21143 non-MII %s transceiver control %04x/%04x\n",
+					   medianame[dev->if_port],
+					   setup[0], setup[1]);
 			if (p[0] & 0x40) {	/* SIA (CSR13-15) setup values are provided. */
 				csr13val = setup[0];
 				csr14val = setup[1];
@@ -239,8 +238,8 @@ void tulip_select_media(struct net_device *dev, int startup)
 				if (startup) iowrite32(csr13val, ioaddr + CSR13);
 			}
 			if (tulip_debug > 1)
-				printk(KERN_DEBUG "%s:  Setting CSR15 to %08x/%08x\n",
-				       dev->name, csr15dir, csr15val);
+				netdev_dbg(dev, "Setting CSR15 to %08x/%08x\n",
+					   csr15dir, csr15val);
 			if (mleaf->type == 4)
 				new_csr6 = 0x82020000 | ((setup[2] & 0x71) << 18);
 			else
@@ -316,9 +315,9 @@ void tulip_select_media(struct net_device *dev, int startup)
 				if (tp->mii_advertise == 0)
 					tp->mii_advertise = tp->advertising[phy_num];
 				if (tulip_debug > 1)
-					printk(KERN_DEBUG "%s:  Advertising %04x on MII %d\n",
-					       dev->name, tp->mii_advertise,
-					       tp->phys[phy_num]);
+					netdev_dbg(dev, " Advertising %04x on MII %d\n",
+						   tp->mii_advertise,
+						   tp->phys[phy_num]);
 				tulip_mdio_write(dev, tp->phys[phy_num], 4, tp->mii_advertise);
 			}
 			break;
@@ -335,8 +334,7 @@ void tulip_select_media(struct net_device *dev, int startup)
 				struct medialeaf *rleaf = &mtable->mleaf[mtable->has_reset];
 				unsigned char *rst = rleaf->leafdata;
 				if (tulip_debug > 1)
-					printk(KERN_DEBUG "%s: Resetting the transceiver\n",
-					       dev->name);
+					netdev_dbg(dev, "Resetting the transceiver\n");
 				for (i = 0; i < rst[0]; i++)
 					iowrite32(get_u16(rst + 1 + (i<<1)) << 16, ioaddr + CSR15);
 			}
@@ -344,20 +342,21 @@ void tulip_select_media(struct net_device *dev, int startup)
 			break;
 		}
 		default:
-			printk(KERN_DEBUG "%s:  Invalid media table selection %d\n",
-			       dev->name, mleaf->type);
+			netdev_dbg(dev, " Invalid media table selection %d\n",
+				   mleaf->type);
 			new_csr6 = 0x020E0000;
 		}
 		if (tulip_debug > 1)
-			printk(KERN_DEBUG "%s: Using media type %s, CSR12 is %02x\n",
-			       dev->name, medianame[dev->if_port],
+			netdev_dbg(dev, "Using media type %s, CSR12 is %02x\n",
+				   medianame[dev->if_port],
 				   ioread32(ioaddr + CSR12) & 0xff);
 	} else if (tp->chip_id == LC82C168) {
 		if (startup && ! tp->medialock)
 			dev->if_port = tp->mii_cnt ? 11 : 0;
 		if (tulip_debug > 1)
-			printk(KERN_DEBUG "%s: PNIC PHY status is %3.3x, media %s\n",
-			       dev->name, ioread32(ioaddr + 0xB8), medianame[dev->if_port]);
+			netdev_dbg(dev, "PNIC PHY status is %3.3x, media %s\n",
+				   ioread32(ioaddr + 0xB8),
+				   medianame[dev->if_port]);
 		if (tp->mii_cnt) {
 			new_csr6 = 0x810C0000;
 			iowrite32(0x0001, ioaddr + CSR15);
@@ -388,9 +387,9 @@ void tulip_select_media(struct net_device *dev, int startup)
 		} else
 			new_csr6 = 0x03860000;
 		if (tulip_debug > 1)
-			printk(KERN_DEBUG "%s: No media description table, assuming %s transceiver, CSR12 %02x\n",
-			       dev->name, medianame[dev->if_port],
-			       ioread32(ioaddr + CSR12));
+			netdev_dbg(dev, "No media description table, assuming %s transceiver, CSR12 %02x\n",
+				   medianame[dev->if_port],
+				   ioread32(ioaddr + CSR12));
 	}
 
 	tp->csr6 = new_csr6 | (tp->csr6 & 0xfdff) | (tp->full_duplex ? 0x0200 : 0);
@@ -504,8 +503,8 @@ void __devinit tulip_find_mii (struct net_device *dev, int board_idx)
 
 		/* Fixup for DLink with miswired PHY. */
 		if (mii_advert != to_advert) {
-			printk(KERN_DEBUG "tulip%d:  Advertising %04x on PHY %d, previously advertising %04x\n",
-			       board_idx, to_advert, phy, mii_advert);
+			pr_debug("tulip%d:  Advertising %04x on PHY %d, previously advertising %04x\n",
+				 board_idx, to_advert, phy, mii_advert);
 			tulip_mdio_write (dev, phy, 4, to_advert);
 		}