diff options
author | hayeswang <hayeswang@realtek.com> | 2017-06-15 08:44:03 +0200 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2017-06-15 20:31:55 +0200 |
commit | 65b82d696b9e84fda6dd7df61801b57d3e7fb976 (patch) | |
tree | 1f992ede24982391127b61a4fdb4c7086ca42a42 /drivers/net/usb | |
parent | r8152: support new chip 8050 (diff) | |
download | linux-65b82d696b9e84fda6dd7df61801b57d3e7fb976.tar.xz linux-65b82d696b9e84fda6dd7df61801b57d3e7fb976.zip |
r8152: support RTL8153B
This patch supports two new chips for RTL8153B.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to '')
-rw-r--r-- | drivers/net/usb/r8152.c | 673 |
1 files changed, 658 insertions, 15 deletions
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 1f4dd8d3e328..932060c3bdc2 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -29,7 +29,7 @@ #include <linux/acpi.h> /* Information for net-next */ -#define NETNEXT_VERSION "08" +#define NETNEXT_VERSION "09" /* Information for net */ #define NET_VERSION "9" @@ -51,11 +51,14 @@ #define PLA_FMC 0xc0b4 #define PLA_CFG_WOL 0xc0b6 #define PLA_TEREDO_CFG 0xc0bc +#define PLA_TEREDO_WAKE_BASE 0xc0c4 #define PLA_MAR 0xcd00 #define PLA_BACKUP 0xd000 #define PAL_BDC_CR 0xd1a0 #define PLA_TEREDO_TIMER 0xd2cc #define PLA_REALWOW_TIMER 0xd2e8 +#define PLA_EFUSE_DATA 0xdd00 +#define PLA_EFUSE_CMD 0xdd02 #define PLA_LEDSEL 0xdd90 #define PLA_LED_FEATURE 0xdd92 #define PLA_PHYAR 0xde00 @@ -105,7 +108,9 @@ #define USB_CSR_DUMMY2 0xb466 #define USB_DEV_STAT 0xb808 #define USB_CONNECT_TIMER 0xcbf8 +#define USB_MSC_TIMER 0xcbfc #define USB_BURST_SIZE 0xcfc0 +#define USB_LPM_CONFIG 0xcfd8 #define USB_USB_CTRL 0xd406 #define USB_PHY_CTRL 0xd408 #define USB_TX_AGG 0xd40a @@ -113,15 +118,20 @@ #define USB_USB_TIMER 0xd428 #define USB_RX_EARLY_TIMEOUT 0xd42c #define USB_RX_EARLY_SIZE 0xd42e -#define USB_PM_CTRL_STATUS 0xd432 +#define USB_PM_CTRL_STATUS 0xd432 /* RTL8153A */ +#define USB_RX_EXTRA_AGGR_TMR 0xd432 /* RTL8153B */ #define USB_TX_DMA 0xd434 +#define USB_UPT_RXDMA_OWN 0xd437 #define USB_TOLERANCE 0xd490 #define USB_LPM_CTRL 0xd41a #define USB_BMU_RESET 0xd4b0 +#define USB_U1U2_TIMER 0xd4da #define USB_UPS_CTRL 0xd800 -#define USB_MISC_0 0xd81a #define USB_POWER_CUT 0xd80a +#define USB_MISC_0 0xd81a #define USB_AFE_CTRL2 0xd824 +#define USB_UPS_CFG 0xd842 +#define USB_UPS_FLAGS 0xd848 #define USB_WDT11_CTRL 0xe43c #define USB_BP_BA 0xfc26 #define USB_BP_0 0xfc28 @@ -133,6 +143,15 @@ #define USB_BP_6 0xfc34 #define USB_BP_7 0xfc36 #define USB_BP_EN 0xfc38 +#define USB_BP_8 0xfc38 +#define USB_BP_9 0xfc3a +#define USB_BP_10 0xfc3c +#define USB_BP_11 0xfc3e +#define USB_BP_12 0xfc40 +#define USB_BP_13 0xfc42 +#define USB_BP_14 0xfc44 +#define USB_BP_15 0xfc46 +#define USB_BP2_EN 0xfc48 /* OCP Registers */ #define OCP_ALDPS_CONFIG 0x2010 @@ -143,6 +162,7 @@ #define OCP_EEE_AR 0xa41a #define OCP_EEE_DATA 0xa41c #define OCP_PHY_STATUS 0xa420 +#define OCP_NCTL_CFG 0xa42c #define OCP_POWER_CFG 0xa430 #define OCP_EEE_CFG 0xa432 #define OCP_SRAM_ADDR 0xa436 @@ -152,9 +172,14 @@ #define OCP_EEE_ADV 0xa5d0 #define OCP_EEE_LPABLE 0xa5d2 #define OCP_PHY_STATE 0xa708 /* nway state for 8153 */ +#define OCP_PHY_PATCH_STAT 0xb800 +#define OCP_PHY_PATCH_CMD 0xb820 +#define OCP_ADC_IOFFSET 0xbcfc #define OCP_ADC_CFG 0xbc06 +#define OCP_SYSCLK_CFG 0xc416 /* SRAM Register */ +#define SRAM_GREEN_CFG 0x8011 #define SRAM_LPF_CFG 0x8012 #define SRAM_10M_AMP1 0x8080 #define SRAM_10M_AMP2 0x8082 @@ -252,6 +277,10 @@ /* PAL_BDC_CR */ #define ALDPS_PROXY_MODE 0x0001 +/* PLA_EFUSE_CMD */ +#define EFUSE_READ_CMD BIT(15) +#define EFUSE_DATA_BIT16 BIT(7) + /* PLA_CONFIG34 */ #define LINK_ON_WAKE_EN 0x0010 #define LINK_OFF_WAKE_EN 0x0008 @@ -277,6 +306,7 @@ /* PLA_MAC_PWR_CTRL2 */ #define EEE_SPDWN_RATIO 0x8007 +#define MAC_CLK_SPDWN_EN BIT(15) /* PLA_MAC_PWR_CTRL3 */ #define PKT_AVAIL_SPDWN_EN 0x0100 @@ -328,6 +358,9 @@ #define STAT_SPEED_HIGH 0x0000 #define STAT_SPEED_FULL 0x0002 +/* USB_LPM_CONFIG */ +#define LPM_U1U2_EN BIT(0) + /* USB_TX_AGG */ #define TX_AGG_MAX_THRESHOLD 0x03 @@ -335,6 +368,7 @@ #define RX_THR_SUPPER 0x0c350180 #define RX_THR_HIGH 0x7a120180 #define RX_THR_SLOW 0xffff0180 +#define RX_THR_B 0x00010001 /* USB_TX_DMA */ #define TEST_MODE_DISABLE 0x00000001 @@ -344,6 +378,10 @@ #define BMU_RESET_EP_IN 0x01 #define BMU_RESET_EP_OUT 0x02 +/* USB_UPT_RXDMA_OWN */ +#define OWN_UPDATE BIT(0) +#define OWN_CLEAR BIT(1) + /* USB_UPS_CTRL */ #define POWER_CUT 0x0100 @@ -360,6 +398,8 @@ /* USB_POWER_CUT */ #define PWR_EN 0x0001 #define PHASE2_EN 0x0008 +#define UPS_EN BIT(4) +#define USP_PREWAKE BIT(5) /* USB_MISC_0 */ #define PCUT_STATUS 0x0001 @@ -386,6 +426,37 @@ #define SEN_VAL_NORMAL 0xa000 #define SEL_RXIDLE 0x0100 +/* USB_UPS_CFG */ +#define SAW_CNT_1MS_MASK 0x0fff + +/* USB_UPS_FLAGS */ +#define UPS_FLAGS_R_TUNE BIT(0) +#define UPS_FLAGS_EN_10M_CKDIV BIT(1) +#define UPS_FLAGS_250M_CKDIV BIT(2) +#define UPS_FLAGS_EN_ALDPS BIT(3) +#define UPS_FLAGS_CTAP_SHORT_DIS BIT(4) +#define UPS_FLAGS_SPEED_MASK (0xf << 16) +#define ups_flags_speed(x) ((x) << 16) +#define UPS_FLAGS_EN_EEE BIT(20) +#define UPS_FLAGS_EN_500M_EEE BIT(21) +#define UPS_FLAGS_EN_EEE_CKDIV BIT(22) +#define UPS_FLAGS_EEE_PLLOFF_GIGA BIT(24) +#define UPS_FLAGS_EEE_CMOD_LV_EN BIT(25) +#define UPS_FLAGS_EN_GREEN BIT(26) +#define UPS_FLAGS_EN_FLOW_CTR BIT(27) + +enum spd_duplex { + NWAY_10M_HALF = 1, + NWAY_10M_FULL, + NWAY_100M_HALF, + NWAY_100M_FULL, + NWAY_1000M_FULL, + FORCE_10M_HALF, + FORCE_10M_FULL, + FORCE_100M_HALF, + FORCE_100M_FULL, +}; + /* OCP_ALDPS_CONFIG */ #define ENPWRSAVE 0x8000 #define ENPDNPS 0x0200 @@ -398,6 +469,9 @@ #define PHY_STAT_LAN_ON 3 #define PHY_STAT_PWRDN 5 +/* OCP_NCTL_CFG */ +#define PGA_RETURN_EN BIT(1) + /* OCP_POWER_CFG */ #define EEE_CLKDIV_EN 0x8000 #define EN_ALDPS 0x0004 @@ -439,17 +513,34 @@ #define EEE10_EN 0x0010 /* OCP_DOWN_SPEED */ +#define EN_EEE_CMODE BIT(14) +#define EN_EEE_1000 BIT(13) +#define EN_EEE_100 BIT(12) +#define EN_10M_CLKDIV BIT(11) #define EN_10M_BGOFF 0x0080 /* OCP_PHY_STATE */ #define TXDIS_STATE 0x01 #define ABD_STATE 0x02 +/* OCP_PHY_PATCH_STAT */ +#define PATCH_READY BIT(6) + +/* OCP_PHY_PATCH_CMD */ +#define PATCH_REQUEST BIT(4) + /* OCP_ADC_CFG */ #define CKADSEL_L 0x0100 #define ADC_EN 0x0080 #define EN_EMI_L 0x0040 +/* OCP_SYSCLK_CFG */ +#define clk_div_expo(x) (min(x, 5) << 8) + +/* SRAM_GREEN_CFG */ +#define GREEN_ETH_EN BIT(15) +#define R_TUNE_EN BIT(11) + /* SRAM_LPF_CFG */ #define LPF_AUTO_TUNE 0x8000 @@ -514,6 +605,7 @@ enum rtl8152_flags { SELECTIVE_SUSPEND, PHY_RESET, SCHEDULE_NAPI, + GREEN_ETHERNET, }; /* Define these values to match your device */ @@ -660,6 +752,8 @@ enum rtl_version { RTL_VER_05, RTL_VER_06, RTL_VER_07, + RTL_VER_08, + RTL_VER_09, RTL_VER_MAX }; @@ -984,6 +1078,12 @@ static void sram_write(struct r8152 *tp, u16 addr, u16 data) ocp_reg_write(tp, OCP_SRAM_DATA, data); } +static u16 sram_read(struct r8152 *tp, u16 addr) +{ + ocp_reg_write(tp, OCP_SRAM_ADDR, addr); + return ocp_reg_read(tp, OCP_SRAM_DATA); +} + static int read_mii_word(struct net_device *netdev, int phy_id, int reg) { struct r8152 *tp = netdev_priv(netdev); @@ -2251,18 +2351,64 @@ static int rtl8152_enable(struct r8152 *tp) return rtl_enable(tp); } +static inline void r8153b_rx_agg_chg_indicate(struct r8152 *tp) +{ + ocp_write_byte(tp, MCU_TYPE_USB, USB_UPT_RXDMA_OWN, + OWN_UPDATE | OWN_CLEAR); +} + static void r8153_set_rx_early_timeout(struct r8152 *tp) { u32 ocp_data = tp->coalesce / 8; - ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_TIMEOUT, ocp_data); + switch (tp->version) { + case RTL_VER_03: + case RTL_VER_04: + case RTL_VER_05: + case RTL_VER_06: + ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_TIMEOUT, + ocp_data); + break; + + case RTL_VER_08: + case RTL_VER_09: + /* The RTL8153B uses USB_RX_EXTRA_AGGR_TMR for rx timeout + * primarily. For USB_RX_EARLY_TIMEOUT, we fix it to 128ns. + */ + ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_TIMEOUT, + 128 / 8); + ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EXTRA_AGGR_TMR, + ocp_data); + r8153b_rx_agg_chg_indicate(tp); + break; + + default: + break; + } } static void r8153_set_rx_early_size(struct r8152 *tp) { - u32 ocp_data = (agg_buf_sz - rx_reserved_size(tp->netdev->mtu)) / 4; + u32 ocp_data = agg_buf_sz - rx_reserved_size(tp->netdev->mtu); - ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE, ocp_data); + switch (tp->version) { + case RTL_VER_03: + case RTL_VER_04: + case RTL_VER_05: + case RTL_VER_06: + ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE, + ocp_data / 4); + break; + case RTL_VER_08: + case RTL_VER_09: + ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE, + ocp_data / 8); + r8153b_rx_agg_chg_indicate(tp); + break; + default: + WARN_ON_ONCE(1); + break; + } } static int rtl8153_enable(struct r8152 *tp) @@ -2470,6 +2616,19 @@ static void r8153_u1u2en(struct r8152 *tp, bool enable) usb_ocp_write(tp, USB_TOLERANCE, BYTE_EN_SIX_BYTES, sizeof(u1u2), u1u2); } +static void r8153b_u1u2en(struct r8152 *tp, bool enable) +{ + u32 ocp_data; + + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_LPM_CONFIG); + if (enable) + ocp_data |= LPM_U1U2_EN; + else + ocp_data &= ~LPM_U1U2_EN; + + ocp_write_word(tp, MCU_TYPE_USB, USB_LPM_CONFIG, ocp_data); +} + static void r8153_u2p3en(struct r8152 *tp, bool enable) { u32 ocp_data; @@ -2482,6 +2641,37 @@ static void r8153_u2p3en(struct r8152 *tp, bool enable) ocp_write_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL, ocp_data); } +static void r8153b_ups_flags_w1w0(struct r8152 *tp, u32 set, u32 clear) +{ + u32 ocp_data; + + ocp_data = ocp_read_dword(tp, MCU_TYPE_USB, USB_UPS_FLAGS); + ocp_data &= ~clear; + ocp_data |= set; + ocp_write_dword(tp, MCU_TYPE_USB, USB_UPS_FLAGS, ocp_data); +} + +static void r8153b_green_en(struct r8152 *tp, bool enable) +{ + u16 data; + + if (enable) { + sram_write(tp, 0x8045, 0); /* 10M abiq&ldvbias */ + sram_write(tp, 0x804d, 0x1222); /* 100M short abiq&ldvbias */ + sram_write(tp, 0x805d, 0x0022); /* 1000M short abiq&ldvbias */ + } else { + sram_write(tp, 0x8045, 0x2444); /* 10M abiq&ldvbias */ + sram_write(tp, 0x804d, 0x2444); /* 100M short abiq&ldvbias */ + sram_write(tp, 0x805d, 0x2444); /* 1000M short abiq&ldvbias */ + } + + data = sram_read(tp, SRAM_GREEN_CFG); + data |= GREEN_ETH_EN; + sram_write(tp, SRAM_GREEN_CFG, data); + + r8153b_ups_flags_w1w0(tp, UPS_FLAGS_EN_GREEN, 0); +} + static u16 r8153_phy_status(struct r8152 *tp, u16 desired) { u16 data; @@ -2504,6 +2694,55 @@ static u16 r8153_phy_status(struct r8152 *tp, u16 desired) return data; } +static void r8153b_ups_en(struct r8152 *tp, bool enable) +{ + u32 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_POWER_CUT); + + if (enable) { + ocp_data |= UPS_EN | USP_PREWAKE | PHASE2_EN; + ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data); + + ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, 0xcfff); + ocp_data |= BIT(0); + ocp_write_byte(tp, MCU_TYPE_USB, 0xcfff, ocp_data); + } else { + u16 data; + + ocp_data &= ~(UPS_EN | USP_PREWAKE); + ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data); + + ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, 0xcfff); + ocp_data &= ~BIT(0); + ocp_write_byte(tp, MCU_TYPE_USB, 0xcfff, ocp_data); + + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0); + ocp_data &= ~PCUT_STATUS; + ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data); + + data = r8153_phy_status(tp, 0); + + switch (data) { + case PHY_STAT_PWRDN: + case PHY_STAT_EXT_INIT: + r8153b_green_en(tp, + test_bit(GREEN_ETHERNET, &tp->flags)); + + data = r8152_mdio_read(tp, MII_BMCR); + data &= ~BMCR_PDOWN; + data |= BMCR_RESET; + r8152_mdio_write(tp, MII_BMCR, data); + + data = r8153_phy_status(tp, PHY_STAT_LAN_ON); + + default: + if (data != PHY_STAT_LAN_ON) + netif_warn(tp, link, tp->netdev, + "PHY not ready"); + break; + } + } +} + static void r8153_power_cut_en(struct r8152 *tp, bool enable) { u32 ocp_data; @@ -2520,6 +2759,38 @@ static void r8153_power_cut_en(struct r8152 *tp, bool enable) ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data); } +static void r8153b_power_cut_en(struct r8152 *tp, bool enable) +{ + u32 ocp_data; + + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_POWER_CUT); + if (enable) + ocp_data |= PWR_EN | PHASE2_EN; + else + ocp_data &= ~PWR_EN; + ocp_write_word(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data); + + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0); + ocp_data &= ~PCUT_STATUS; + ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data); +} + +static void r8153b_queue_wake(struct r8152 *tp, bool enable) +{ + u32 ocp_data; + + ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, 0xd38a); + if (enable) + ocp_data |= BIT(0); + else + ocp_data &= ~BIT(0); + ocp_write_byte(tp, MCU_TYPE_PLA, 0xd38a, ocp_data); + + ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, 0xd38c); + ocp_data &= ~BIT(0); + ocp_write_byte(tp, MCU_TYPE_PLA, 0xd38c, ocp_data); +} + static bool rtl_can_wakeup(struct r8152 *tp) { struct usb_device *udev = tp->udev; @@ -2582,13 +2853,52 @@ static void rtl8153_runtime_enable(struct r8152 *tp, bool enable) } } +static void rtl8153b_runtime_enable(struct r8152 *tp, bool enable) +{ + if (enable) { + r8153b_queue_wake(tp, true); + r8153b_u1u2en(tp, false); + r8153_u2p3en(tp, false); + rtl_runtime_suspend_enable(tp, true); + r8153b_ups_en(tp, true); + } else { + r8153b_ups_en(tp, false); + r8153b_queue_wake(tp, false); + rtl_runtime_suspend_enable(tp, false); + r8153_u2p3en(tp, true); + r8153b_u1u2en(tp, true); + } +} + static void r8153_teredo_off(struct r8152 *tp) { u32 ocp_data; - ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG); - ocp_data &= ~(TEREDO_SEL | TEREDO_RS_EVENT_MASK | OOB_TEREDO_EN); - ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data); + switch (tp->version) { + case RTL_VER_01: + case RTL_VER_02: + case RTL_VER_03: + case RTL_VER_04: + case RTL_VER_05: + case RTL_VER_06: + case RTL_VER_07: + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG); + ocp_data &= ~(TEREDO_SEL | TEREDO_RS_EVENT_MASK | + OOB_TEREDO_EN); + ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data); + break; + + case RTL_VER_08: + case RTL_VER_09: + /* The bit 0 ~ 7 are relative with teredo settings. They are + * W1C (write 1 to clear), so set all 1 to disable it. + */ + ocp_write_byte(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, 0xff); + break; + + default: + break; + } ocp_write_word(tp, MCU_TYPE_PLA, PLA_WDT6_CTRL, WDT6_SET_MODE); ocp_write_word(tp, MCU_TYPE_PLA, PLA_REALWOW_TIMER, 0); @@ -2834,6 +3144,33 @@ static void r8152b_enter_oob(struct r8152 *tp) ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data); } +static int r8153_patch_request(struct r8152 *tp, bool request) +{ + u16 data; + int i; + + data = ocp_reg_read(tp, OCP_PHY_PATCH_CMD); + if (request) + data |= PATCH_REQUEST; + else + data &= ~PATCH_REQUEST; + ocp_reg_write(tp, OCP_PHY_PATCH_CMD, data); + + for (i = 0; request && i < 5000; i++) { + usleep_range(1000, 2000); + if (ocp_reg_read(tp, OCP_PHY_PATCH_STAT) & PATCH_READY) + break; + } + + if (request && !(ocp_reg_read(tp, OCP_PHY_PATCH_STAT) & PATCH_READY)) { + netif_err(tp, drv, tp->netdev, "patch request fail\n"); + r8153_patch_request(tp, false); + return -ETIME; + } else { + return 0; + } +} + static void r8153_aldps_en(struct r8152 *tp, bool enable) { u16 data; @@ -2855,6 +3192,16 @@ static void r8153_aldps_en(struct r8152 *tp, bool enable) } } +static void r8153b_aldps_en(struct r8152 *tp, bool enable) +{ + r8153_aldps_en(tp, enable); + + if (enable) + r8153b_ups_flags_w1w0(tp, UPS_FLAGS_EN_ALDPS, 0); + else + r8153b_ups_flags_w1w0(tp, 0, UPS_FLAGS_EN_ALDPS); +} + static void r8153_eee_en(struct r8152 *tp, bool enable) { u32 ocp_data; @@ -2875,6 +3222,22 @@ static void r8153_eee_en(struct r8152 *tp, bool enable) ocp_reg_write(tp, OCP_EEE_CFG, config); } +static void r8153b_eee_en(struct r8152 *tp, bool enable) +{ + r8153_eee_en(tp, enable); + + if (enable) + r8153b_ups_flags_w1w0(tp, UPS_FLAGS_EN_EEE, 0); + else + r8153b_ups_flags_w1w0(tp, 0, UPS_FLAGS_EN_EEE); +} + +static void r8153b_enable_fc(struct r8152 *tp) +{ + r8152b_enable_fc(tp); + r8153b_ups_flags_w1w0(tp, UPS_FLAGS_EN_FLOW_CTR, 0); +} + static void r8153_hw_phy_cfg(struct r8152 *tp) { u32 ocp_data; @@ -2936,6 +3299,100 @@ static void r8153_hw_phy_cfg(struct r8152 *tp) set_bit(PHY_RESET, &tp->flags); } +static u32 r8152_efuse_read(struct r8152 *tp, u8 addr) +{ + u32 ocp_data; + + ocp_write_word(tp, MCU_TYPE_PLA, PLA_EFUSE_CMD, EFUSE_READ_CMD | addr); + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EFUSE_CMD); + ocp_data = (ocp_data & EFUSE_DATA_BIT16) << 9; /* data of bit16 */ + ocp_data |= ocp_read_word(tp, MCU_TYPE_PLA, PLA_EFUSE_DATA); + + return ocp_data; +} + +static void r8153b_hw_phy_cfg(struct r8152 *tp) +{ + u32 ocp_data, ups_flags = 0; + u16 data; + + /* disable ALDPS before updating the PHY parameters */ + r8153b_aldps_en(tp, false); + + /* disable EEE before updating the PHY parameters */ + r8153b_eee_en(tp, false); + ocp_reg_write(tp, OCP_EEE_ADV, 0); + + r8153b_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags)); + + data = sram_read(tp, SRAM_GREEN_CFG); + data |= R_TUNE_EN; + sram_write(tp, SRAM_GREEN_CFG, data); + data = ocp_reg_read(tp, OCP_NCTL_CFG); + data |= PGA_RETURN_EN; + ocp_reg_write(tp, OCP_NCTL_CFG, data); + + /* ADC Bias Calibration: + * read efuse offset 0x7d to get a 17-bit data. Remove the dummy/fake + * bit (bit3) to rebuild the real 16-bit data. Write the data to the + * ADC ioffset. + */ + ocp_data = r8152_efuse_read(tp, 0x7d); + data = (u16)(((ocp_data & 0x1fff0) >> 1) | (ocp_data & 0x7)); + if (data != 0xffff) + ocp_reg_write(tp, OCP_ADC_IOFFSET, data); + + /* ups mode tx-link-pulse timing adjustment: + * rg_saw_cnt = OCP reg 0xC426 Bit[13:0] + * swr_cnt_1ms_ini = 16000000 / rg_saw_cnt + */ + ocp_data = ocp_reg_read(tp, 0xc426); + ocp_data &= 0x3fff; + if (ocp_data) { + u32 swr_cnt_1ms_ini; + + swr_cnt_1ms_ini = (16000000 / ocp_data) & SAW_CNT_1MS_MASK; + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CFG); + ocp_data = (ocp_data & ~SAW_CNT_1MS_MASK) | swr_cnt_1ms_ini; + ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CFG, ocp_data); + } + + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR); + ocp_data |= PFM_PWM_SWITCH; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data); + + /* Advnace EEE */ + if (!r8153_patch_request(tp, true)) { + data = ocp_reg_read(tp, OCP_POWER_CFG); + data |= EEE_CLKDIV_EN; + ocp_reg_write(tp, OCP_POWER_CFG, data); + + data = ocp_reg_read(tp, OCP_DOWN_SPEED); + data |= EN_EEE_CMODE | EN_EEE_1000 | EN_10M_CLKDIV; + ocp_reg_write(tp, OCP_DOWN_SPEED, data); + + ocp_reg_write(tp, OCP_SYSCLK_CFG, 0); + ocp_reg_write(tp, OCP_SYSCLK_CFG, clk_div_expo(5)); + + ups_flags |= UPS_FLAGS_EN_10M_CKDIV | UPS_FLAGS_250M_CKDIV | + UPS_FLAGS_EN_EEE_CKDIV | UPS_FLAGS_EEE_CMOD_LV_EN | + UPS_FLAGS_EEE_PLLOFF_GIGA; + + r8153_patch_request(tp, false); + } + + r8153b_ups_flags_w1w0(tp, ups_flags, 0); + + r8153b_eee_en(tp, true); + ocp_reg_write(tp, OCP_EEE_ADV, MDIO_EEE_1000T | MDIO_EEE_100TX); + + r8153b_aldps_en(tp, true); + r8153b_enable_fc(tp); + r8153_u2p3en(tp, true); + + set_bit(PHY_RESET, &tp->flags); +} + static void r8153_first_init(struct r8152 *tp) { u32 ocp_data; @@ -3033,9 +3490,28 @@ static void r8153_enter_oob(struct r8152 *tp) ocp_data = tp->netdev->mtu + VLAN_ETH_HLEN + CRC_SIZE; ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, ocp_data); - ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG); - ocp_data &= ~TEREDO_WAKE_MASK; - ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data); + switch (tp->version) { + case RTL_VER_03: + case RTL_VER_04: + case RTL_VER_05: + case RTL_VER_06: + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG); + ocp_data &= ~TEREDO_WAKE_MASK; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data); + break; + + case RTL_VER_08: + case RTL_VER_09: + /* Clear teredo wake event. bit[15:8] is the teredo wakeup + * type. Set it to zero. bits[7:0] are the W1C bits about + * the events. Set them to all 1 to clear them. + */ + ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_WAKE_BASE, 0x00ff); + break; + + default: + break; + } rtl_rx_vlan_en(tp, true); @@ -3062,9 +3538,18 @@ static void rtl8153_disable(struct r8152 *tp) r8153_aldps_en(tp, true); } +static void rtl8153b_disable(struct r8152 *tp) +{ + r8153b_aldps_en(tp, false); + rtl_disable(tp); + rtl_reset_bmu(tp); + r8153b_aldps_en(tp, true); +} + static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex) { u16 bmcr, anar, gbcr; + enum spd_duplex speed_duplex; int ret = 0; anar = r8152_mdio_read(tp, MII_ADVERTISE); @@ -3081,32 +3566,43 @@ static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex) if (speed == SPEED_10) { bmcr = 0; anar |= ADVERTISE_10HALF | ADVERTISE_10FULL; + speed_duplex = FORCE_10M_HALF; } else if (speed == SPEED_100) { bmcr = BMCR_SPEED100; anar |= ADVERTISE_100HALF | ADVERTISE_100FULL; + speed_duplex = FORCE_100M_HALF; } else if (speed == SPEED_1000 && tp->mii.supports_gmii) { bmcr = BMCR_SPEED1000; gbcr |= ADVERTISE_1000FULL | ADVERTISE_1000HALF; + speed_duplex = NWAY_1000M_FULL; } else { ret = -EINVAL; goto out; } - if (duplex == DUPLEX_FULL) + if (duplex == DUPLEX_FULL) { bmcr |= BMCR_FULLDPLX; + if (speed != SPEED_1000) + speed_duplex++; + } } else { if (speed == SPEED_10) { - if (duplex == DUPLEX_FULL) + if (duplex == DUPLEX_FULL) { anar |= ADVERTISE_10HALF | ADVERTISE_10FULL; - else + speed_duplex = NWAY_10M_FULL; + } else { anar |= ADVERTISE_10HALF; + speed_duplex = NWAY_10M_HALF; + } } else if (speed == SPEED_100) { if (duplex == DUPLEX_FULL) { anar |= ADVERTISE_10HALF | ADVERTISE_10FULL; anar |= ADVERTISE_100HALF | ADVERTISE_100FULL; + speed_duplex = NWAY_100M_FULL; } else { anar |= ADVERTISE_10HALF; anar |= ADVERTISE_100HALF; + speed_duplex = NWAY_100M_HALF; } } else if (speed == SPEED_1000 && tp->mii.supports_gmii) { if (duplex == DUPLEX_FULL) { @@ -3118,6 +3614,7 @@ static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex) anar |= ADVERTISE_100HALF; gbcr |= ADVERTISE_1000HALF; } + speed_duplex = NWAY_1000M_FULL; } else { ret = -EINVAL; goto out; @@ -3135,6 +3632,17 @@ static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex) r8152_mdio_write(tp, MII_ADVERTISE, anar); r8152_mdio_write(tp, MII_BMCR, bmcr); + switch (tp->version) { + case RTL_VER_08: + case RTL_VER_09: + r8153b_ups_flags_w1w0(tp, ups_flags_speed(speed_duplex), + UPS_FLAGS_SPEED_MASK); + break; + + default: + break; + } + if (bmcr & BMCR_RESET) { int i; @@ -3212,6 +3720,38 @@ static void rtl8153_down(struct r8152 *tp) r8153_aldps_en(tp, true); } +static void rtl8153b_up(struct r8152 *tp) +{ + if (test_bit(RTL8152_UNPLUG, &tp->flags)) + return; + + r8153b_u1u2en(tp, false); + r8153_u2p3en(tp, false); + r8153b_aldps_en(tp, false); + + r8153_first_init(tp); + ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_B); + + r8153b_aldps_en(tp, true); + r8153_u2p3en(tp, true); + r8153b_u1u2en(tp, true); +} + +static void rtl8153b_down(struct r8152 *tp) +{ + if (test_bit(RTL8152_UNPLUG, &tp->flags)) { + rtl_drop_queued_tx(tp); + return; + } + + r8153b_u1u2en(tp, false); + r8153_u2p3en(tp, false); + r8153b_power_cut_en(tp, false); + r8153b_aldps_en(tp, false); + r8153_enter_oob(tp); + r8153b_aldps_en(tp, true); +} + static bool rtl8152_in_nway(struct r8152 *tp) { u16 nway_state; @@ -3607,6 +4147,66 @@ static void r8153_init(struct r8152 *tp) } } +static void r8153b_init(struct r8152 *tp) +{ + u32 ocp_data; + u16 data; + int i; + + if (test_bit(RTL8152_UNPLUG, &tp->flags)) + return; + + r8153b_u1u2en(tp, false); + + for (i = 0; i < 500; i++) { + if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) & + AUTOLOAD_DONE) + break; + msleep(20); + } + + data = r8153_phy_status(tp, 0); + + data = r8152_mdio_read(tp, MII_BMCR); + if (data & BMCR_PDOWN) { + data &= ~BMCR_PDOWN; + r8152_mdio_write(tp, MII_BMCR, data); + } + + data = r8153_phy_status(tp, PHY_STAT_LAN_ON); + + r8153_u2p3en(tp, false); + + /* MSC timer = 0xfff * 8ms = 32760 ms */ + ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff); + + /* U1/U2/L1 idle timer. 500 us */ + ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500); + + r8153b_power_cut_en(tp, false); + r8153b_ups_en(tp, false); + r8153b_queue_wake(tp, false); + rtl_runtime_suspend_enable(tp, false); + r8153b_u1u2en(tp, true); + usb_enable_lpm(tp->udev); + + /* MAC clock speed down */ + ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2); + ocp_data |= MAC_CLK_SPDWN_EN; + ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, ocp_data); + + set_bit(GREEN_ETHERNET, &tp->flags); + + /* rx aggregation */ + ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL); + ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN); + ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data); + + rtl_tally_reset(tp); + + tp->coalesce = 15000; /* 15 us */ +} + static int rtl8152_pre_reset(struct usb_interface *intf) { struct r8152 *tp = usb_get_intfdata(intf); @@ -4109,6 +4709,20 @@ static int r8153_set_eee(struct r8152 *tp, struct ethtool_eee *eee) return 0; } +static int r8153b_set_eee(struct r8152 *tp, struct ethtool_eee *eee) +{ + u16 val = ethtool_adv_to_mmd_eee_adv_t(eee->advertised); + + r8153b_eee_en(tp, eee->eee_enabled); + + if (!eee->eee_enabled) + val = 0; + + ocp_reg_write(tp, OCP_EEE_ADV, val); + + return 0; +} + static int rtl_ethtool_get_eee(struct net_device *net, struct ethtool_eee *edata) { @@ -4366,6 +4980,14 @@ static void rtl8153_unload(struct r8152 *tp) r8153_power_cut_en(tp, false); } +static void rtl8153b_unload(struct r8152 *tp) +{ + if (test_bit(RTL8152_UNPLUG, &tp->flags)) + return; + + r8153b_power_cut_en(tp, false); +} + static int rtl_ops_init(struct r8152 *tp) { struct rtl_ops *ops = &tp->rtl_ops; @@ -4405,6 +5027,21 @@ static int rtl_ops_init(struct r8152 *tp) ops->autosuspend_en = rtl8153_runtime_enable; break; + case RTL_VER_08: + case RTL_VER_09: + ops->init = r8153b_init; + ops->enable = rtl8153_enable; + ops->disable = rtl8153b_disable; + ops->up = rtl8153b_up; + ops->down = rtl8153b_down; + ops->unload = rtl8153b_unload; + ops->eee_get = r8153_get_eee; + ops->eee_set = r8153b_set_eee; + ops->in_nway = rtl8153_in_nway; + ops->hw_phy_cfg = r8153b_hw_phy_cfg; + ops->autosuspend_en = rtl8153b_runtime_enable; + break; + default: ret = -ENODEV; netif_err(tp, probe, tp->netdev, "Unknown Device\n"); @@ -4456,6 +5093,12 @@ static u8 rtl_get_version(struct usb_interface *intf) case 0x4800: version = RTL_VER_07; break; + case 0x6000: + version = RTL_VER_08; + break; + case 0x6010: + version = RTL_VER_09; + break; default: version = RTL_VER_UNKNOWN; dev_info(&intf->dev, "Unknown version 0x%04x\n", ocp_data); |