Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Lots of conflicts, by happily all cases of overlapping
changes, parallel adds, things of that nature.

Thanks to Stephen Rothwell, Saeed Mahameed, and others
for their guidance in these resolutions.

Signed-off-by: David S. Miller <davem@davemloft.net>

4 files changed, 44 insertions, 13 deletions

diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 184c24baca15..d6916f787fce 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -2807,6 +2807,12 @@ static int hso_get_config_data(struct usb_interface *interface)
 		return -EIO;
 	}
 
+	/* check if we have a valid interface */
+	if (if_num > 16) {
+		kfree(config_data);
+		return -EINVAL;
+	}
+
 	switch (config_data[if_num]) {
 	case 0x0:
 		result = 0;
@@ -2877,10 +2883,18 @@ static int hso_probe(struct usb_interface *interface,
 
 	/* Get the interface/port specification from either driver_info or from
 	 * the device itself */
-	if (id->driver_info)
+	if (id->driver_info) {
+		/* if_num is controlled by the device, driver_info is a 0 terminated
+		 * array. Make sure, the access is in bounds! */
+		for (i = 0; i <= if_num; ++i)
+			if (((u32 *)(id->driver_info))[i] == 0)
+				goto exit;
 		port_spec = ((u32 *)(id->driver_info))[if_num];
-	else
+	} else {
 		port_spec = hso_get_config_data(interface);
+		if (port_spec < 0)
+			goto exit;
+	}
 
 	/* Check if we need to switch to alt interfaces prior to port
 	 * configuration */
diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 3c8bdac78866..e96bc0c6140f 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -2325,6 +2325,10 @@ static int lan78xx_set_mac_addr(struct net_device *netdev, void *p)
 	ret = lan78xx_write_reg(dev, RX_ADDRL, addr_lo);
 	ret = lan78xx_write_reg(dev, RX_ADDRH, addr_hi);
 
+	/* Added to support MAC address changes */
+	ret = lan78xx_write_reg(dev, MAF_LO(0), addr_lo);
+	ret = lan78xx_write_reg(dev, MAF_HI(0), addr_hi | MAF_HI_VALID_);
+
 	return 0;
 }
 
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 72a55b6b4211..c8872dd5ff5e 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1117,6 +1117,7 @@ static const struct usb_device_id products[] = {
 	{QMI_FIXED_INTF(0x1435, 0xd181, 4)},	/* Wistron NeWeb D18Q1 */
 	{QMI_FIXED_INTF(0x1435, 0xd181, 5)},	/* Wistron NeWeb D18Q1 */
 	{QMI_FIXED_INTF(0x1435, 0xd191, 4)},	/* Wistron NeWeb D19Q1 */
+	{QMI_QUIRK_SET_DTR(0x1508, 0x1001, 4)},	/* Fibocom NL668 series */
 	{QMI_FIXED_INTF(0x16d8, 0x6003, 0)},	/* CMOTech 6003 */
 	{QMI_FIXED_INTF(0x16d8, 0x6007, 0)},	/* CMOTech CHE-628S */
 	{QMI_FIXED_INTF(0x16d8, 0x6008, 0)},	/* CMOTech CMU-301 */
@@ -1229,6 +1230,7 @@ static const struct usb_device_id products[] = {
 	{QMI_FIXED_INTF(0x1bc7, 0x1101, 3)},	/* Telit ME910 dual modem */
 	{QMI_FIXED_INTF(0x1bc7, 0x1200, 5)},	/* Telit LE920 */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1201, 2)},	/* Telit LE920, LE920A4 */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1900, 1)},	/* Telit LN940 series */
 	{QMI_FIXED_INTF(0x1c9e, 0x9801, 3)},	/* Telewell TW-3G HSPA+ */
 	{QMI_FIXED_INTF(0x1c9e, 0x9803, 4)},	/* Telewell TW-3G HSPA+ */
 	{QMI_FIXED_INTF(0x1c9e, 0x9b01, 3)},	/* XS Stick W100-2 from 4G Systems */
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index f1b5201cc320..60dd1ec1665f 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -129,6 +129,7 @@
 #define USB_UPS_CTRL		0xd800
 #define USB_POWER_CUT		0xd80a
 #define USB_MISC_0		0xd81a
+#define USB_MISC_1		0xd81f
 #define USB_AFE_CTRL2		0xd824
 #define USB_UPS_CFG		0xd842
 #define USB_UPS_FLAGS		0xd848
@@ -555,6 +556,7 @@ enum spd_duplex {
 
 /* MAC PASSTHRU */
 #define AD_MASK			0xfee0
+#define BND_MASK		0x0004
 #define EFUSE			0xcfdb
 #define PASS_THRU_MASK		0x1
 
@@ -1150,7 +1152,7 @@ out1:
 	return ret;
 }
 
-/* Devices containing RTL8153-AD can support a persistent
+/* Devices containing proper chips can support a persistent
  * host system provided MAC address.
  * Examples of this are Dell TB15 and Dell WD15 docks
  */
@@ -1165,13 +1167,23 @@ static int vendor_mac_passthru_addr_read(struct r8152 *tp, struct sockaddr *sa)
 
 	/* test for -AD variant of RTL8153 */
 	ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
-	if ((ocp_data & AD_MASK) != 0x1000)
-		return -ENODEV;
-
-	/* test for MAC address pass-through bit */
-	ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, EFUSE);
-	if ((ocp_data & PASS_THRU_MASK) != 1)
-		return -ENODEV;
+	if ((ocp_data & AD_MASK) == 0x1000) {
+		/* test for MAC address pass-through bit */
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, EFUSE);
+		if ((ocp_data & PASS_THRU_MASK) != 1) {
+			netif_dbg(tp, probe, tp->netdev,
+				  "No efuse for RTL8153-AD MAC pass through\n");
+			return -ENODEV;
+		}
+	} else {
+		/* test for RTL8153-BND */
+		ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_MISC_1);
+		if ((ocp_data & BND_MASK) == 0) {
+			netif_dbg(tp, probe, tp->netdev,
+				  "Invalid variant for MAC pass through\n");
+			return -ENODEV;
+		}
+	}
 
 	/* returns _AUXMAC_#AABBCCDDEEFF# */
 	status = acpi_evaluate_object(NULL, "\\_SB.AMAC", NULL, &buffer);
@@ -1217,9 +1229,8 @@ static int set_ethernet_addr(struct r8152 *tp)
 	if (tp->version == RTL_VER_01) {
 		ret = pla_ocp_read(tp, PLA_IDR, 8, sa.sa_data);
 	} else {
-		/* if this is not an RTL8153-AD, no eFuse mac pass thru set,
-		 * or system doesn't provide valid _SB.AMAC this will be
-		 * be expected to non-zero
+		/* if device doesn't support MAC pass through this will
+		 * be expected to be non-zero
 		 */
 		ret = vendor_mac_passthru_addr_read(tp, &sa);
 		if (ret < 0)