PC300too alternative WAN driver

The attached patch adds an alternative driver "pc300too" for PCI WAN
cards PC300/RSV and PC300/X21 made by Cyclades Corp. (now Avocent Corp).

Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 565 insertions, 0 deletions

diff --git a/drivers/net/wan/pc300too.c b/drivers/net/wan/pc300too.c
new file mode 100644
index 000000000000..79b2d5454d6b
--- /dev/null
+++ b/drivers/net/wan/pc300too.c
@@ -0,0 +1,565 @@
+/*
+ * Cyclades PC300 synchronous serial card driver for Linux
+ *
+ * Copyright (C) 2000-2007 Krzysztof Halasa <khc@pm.waw.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ *
+ * For information see <http://www.kernel.org/pub/linux/utils/net/hdlc/>.
+ *
+ * Sources of information:
+ *    Hitachi HD64572 SCA-II User's Manual
+ *    Cyclades PC300 Linux driver
+ *
+ * This driver currently supports only PC300/RSV (V.24/V.35) and
+ * PC300/X21 cards.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/in.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/moduleparam.h>
+#include <linux/netdevice.h>
+#include <linux/hdlc.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+
+#include "hd64572.h"
+
+static const char* version = "Cyclades PC300 driver version: 1.17";
+static const char* devname = "PC300";
+
+#undef DEBUG_PKT
+#define DEBUG_RINGS
+
+#define PC300_PLX_SIZE		0x80    /* PLX control window size (128 B) */
+#define PC300_SCA_SIZE		0x400   /* SCA window size (1 KB) */
+#define ALL_PAGES_ALWAYS_MAPPED
+#define NEED_DETECT_RAM
+#define NEED_SCA_MSCI_INTR
+#define MAX_TX_BUFFERS		10
+
+static int pci_clock_freq = 33000000;
+static int use_crystal_clock = 0;
+static unsigned int CLOCK_BASE;
+
+/* Masks to access the init_ctrl PLX register */
+#define PC300_CLKSEL_MASK	 (0x00000004UL)
+#define PC300_CHMEDIA_MASK(port) (0x00000020UL << ((port) * 3))
+#define PC300_CTYPE_MASK	 (0x00000800UL)
+
+
+enum { PC300_RSV = 1, PC300_X21, PC300_TE }; /* card types */
+
+/*
+ *      PLX PCI9050-1 local configuration and shared runtime registers.
+ *      This structure can be used to access 9050 registers (memory mapped).
+ */
+typedef struct {
+	u32 loc_addr_range[4];	/* 00-0Ch : Local Address Ranges */
+	u32 loc_rom_range;	/* 10h : Local ROM Range */
+	u32 loc_addr_base[4];	/* 14-20h : Local Address Base Addrs */
+	u32 loc_rom_base;	/* 24h : Local ROM Base */
+	u32 loc_bus_descr[4];	/* 28-34h : Local Bus Descriptors */
+	u32 rom_bus_descr;	/* 38h : ROM Bus Descriptor */
+	u32 cs_base[4];		/* 3C-48h : Chip Select Base Addrs */
+	u32 intr_ctrl_stat;	/* 4Ch : Interrupt Control/Status */
+	u32 init_ctrl;		/* 50h : EEPROM ctrl, Init Ctrl, etc */
+}plx9050;
+
+
+
+typedef struct port_s {
+	struct net_device *dev;
+	struct card_s *card;
+	spinlock_t lock;	/* TX lock */
+	sync_serial_settings settings;
+	int rxpart;		/* partial frame received, next frame invalid*/
+	unsigned short encoding;
+	unsigned short parity;
+	unsigned int iface;
+	u16 rxin;		/* rx ring buffer 'in' pointer */
+	u16 txin;		/* tx ring buffer 'in' and 'last' pointers */
+	u16 txlast;
+	u8 rxs, txs, tmc;	/* SCA registers */
+	u8 phy_node;		/* physical port # - 0 or 1 */
+}port_t;
+
+
+
+typedef struct card_s {
+	int type;		/* RSV, X21, etc. */
+	int n_ports;		/* 1 or 2 ports */
+	u8* __iomem rambase;	/* buffer memory base (virtual) */
+	u8* __iomem scabase;	/* SCA memory base (virtual) */
+	plx9050 __iomem *plxbase; /* PLX registers memory base (virtual) */
+	u32 init_ctrl_value;	/* Saved value - 9050 bug workaround */
+	u16 rx_ring_buffers;	/* number of buffers in a ring */
+	u16 tx_ring_buffers;
+	u16 buff_offset;	/* offset of first buffer of first channel */
+	u8 irq;			/* interrupt request level */
+
+	port_t ports[2];
+}card_t;
+
+
+#define sca_in(reg, card)	     readb(card->scabase + (reg))
+#define sca_out(value, reg, card)    writeb(value, card->scabase + (reg))
+#define sca_inw(reg, card)	     readw(card->scabase + (reg))
+#define sca_outw(value, reg, card)   writew(value, card->scabase + (reg))
+#define sca_inl(reg, card)	     readl(card->scabase + (reg))
+#define sca_outl(value, reg, card)   writel(value, card->scabase + (reg))
+
+#define port_to_card(port)	     (port->card)
+#define log_node(port)		     (port->phy_node)
+#define phy_node(port)		     (port->phy_node)
+#define winbase(card)		     (card->rambase)
+#define get_port(card, port)	     ((port) < (card)->n_ports ? \
+					 (&(card)->ports[port]) : (NULL))
+
+#include "hd6457x.c"
+
+
+static void pc300_set_iface(port_t *port)
+{
+	card_t *card = port->card;
+	u32* init_ctrl = &card->plxbase->init_ctrl;
+	u16 msci = get_msci(port);
+	u8 rxs = port->rxs & CLK_BRG_MASK;
+	u8 txs = port->txs & CLK_BRG_MASK;
+
+	sca_out(EXS_TES1, (phy_node(port) ? MSCI1_OFFSET : MSCI0_OFFSET) + EXS,
+		port_to_card(port));
+	switch(port->settings.clock_type) {
+	case CLOCK_INT:
+		rxs |= CLK_BRG; /* BRG output */
+		txs |= CLK_PIN_OUT | CLK_TX_RXCLK; /* RX clock */
+		break;
+
+	case CLOCK_TXINT:
+		rxs |= CLK_LINE; /* RXC input */
+		txs |= CLK_PIN_OUT | CLK_BRG; /* BRG output */
+		break;
+
+	case CLOCK_TXFROMRX:
+		rxs |= CLK_LINE; /* RXC input */
+		txs |= CLK_PIN_OUT | CLK_TX_RXCLK; /* RX clock */
+		break;
+
+	default:		/* EXTernal clock */
+		rxs |= CLK_LINE; /* RXC input */
+		txs |= CLK_PIN_OUT | CLK_LINE; /* TXC input */
+		break;
+	}
+
+	port->rxs = rxs;
+	port->txs = txs;
+	sca_out(rxs, msci + RXS, card);
+	sca_out(txs, msci + TXS, card);
+	sca_set_port(port);
+
+	if (port->card->type == PC300_RSV) {
+		if (port->iface == IF_IFACE_V35)
+			writel(card->init_ctrl_value |
+			       PC300_CHMEDIA_MASK(port->phy_node), init_ctrl);
+		else
+			writel(card->init_ctrl_value &
+			       ~PC300_CHMEDIA_MASK(port->phy_node), init_ctrl);
+	}
+}
+
+
+
+static int pc300_open(struct net_device *dev)
+{
+	port_t *port = dev_to_port(dev);
+
+	int result = hdlc_open(dev);
+	if (result)
+		return result;
+
+	sca_open(dev);
+	pc300_set_iface(port);
+	return 0;
+}
+
+
+
+static int pc300_close(struct net_device *dev)
+{
+	sca_close(dev);
+	hdlc_close(dev);
+	return 0;
+}
+
+
+
+static int pc300_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+	const size_t size = sizeof(sync_serial_settings);
+	sync_serial_settings new_line;
+	sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
+	int new_type;
+	port_t *port = dev_to_port(dev);
+
+#ifdef DEBUG_RINGS
+	if (cmd == SIOCDEVPRIVATE) {
+		sca_dump_rings(dev);
+		return 0;
+	}
+#endif
+	if (cmd != SIOCWANDEV)
+		return hdlc_ioctl(dev, ifr, cmd);
+
+	if (ifr->ifr_settings.type == IF_GET_IFACE) {
+		ifr->ifr_settings.type = port->iface;
+		if (ifr->ifr_settings.size < size) {
+			ifr->ifr_settings.size = size; /* data size wanted */
+			return -ENOBUFS;
+		}
+		if (copy_to_user(line, &port->settings, size))
+			return -EFAULT;
+		return 0;
+
+	}
+
+	if (port->card->type == PC300_X21 &&
+	    (ifr->ifr_settings.type == IF_IFACE_SYNC_SERIAL ||
+	     ifr->ifr_settings.type == IF_IFACE_X21))
+		new_type = IF_IFACE_X21;
+
+	else if (port->card->type == PC300_RSV &&
+		 (ifr->ifr_settings.type == IF_IFACE_SYNC_SERIAL ||
+		  ifr->ifr_settings.type == IF_IFACE_V35))
+		new_type = IF_IFACE_V35;
+
+	else if (port->card->type == PC300_RSV &&
+		 ifr->ifr_settings.type == IF_IFACE_V24)
+		new_type = IF_IFACE_V24;
+
+	else
+		return hdlc_ioctl(dev, ifr, cmd);
+
+	if (!capable(CAP_NET_ADMIN))
+		return -EPERM;
+
+	if (copy_from_user(&new_line, line, size))
+		return -EFAULT;
+
+	if (new_line.clock_type != CLOCK_EXT &&
+	    new_line.clock_type != CLOCK_TXFROMRX &&
+	    new_line.clock_type != CLOCK_INT &&
+	    new_line.clock_type != CLOCK_TXINT)
+		return -EINVAL;	/* No such clock setting */
+
+	if (new_line.loopback != 0 && new_line.loopback != 1)
+		return -EINVAL;
+
+	memcpy(&port->settings, &new_line, size); /* Update settings */
+	port->iface = new_type;
+	pc300_set_iface(port);
+	return 0;
+}
+
+
+
+static void pc300_pci_remove_one(struct pci_dev *pdev)
+{
+	int i;
+	card_t *card = pci_get_drvdata(pdev);
+
+	for (i = 0; i < 2; i++)
+		if (card->ports[i].card) {
+			struct net_device *dev = port_to_dev(&card->ports[i]);
+			unregister_hdlc_device(dev);
+		}
+
+	if (card->irq)
+		free_irq(card->irq, card);
+
+	if (card->rambase)
+		iounmap(card->rambase);
+	if (card->scabase)
+		iounmap(card->scabase);
+	if (card->plxbase)
+		iounmap(card->plxbase);
+
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+	if (card->ports[0].dev)
+		free_netdev(card->ports[0].dev);
+	if (card->ports[1].dev)
+		free_netdev(card->ports[1].dev);
+	kfree(card);
+}
+
+
+
+static int __devinit pc300_pci_init_one(struct pci_dev *pdev,
+					const struct pci_device_id *ent)
+{
+	card_t *card;
+	u8 rev_id;
+	u32 __iomem *p;
+	int i;
+	u32 ramsize;
+	u32 ramphys;		/* buffer memory base */
+	u32 scaphys;		/* SCA memory base */
+	u32 plxphys;		/* PLX registers memory base */
+
+#ifndef MODULE
+	static int printed_version;
+	if (!printed_version++)
+		printk(KERN_INFO "%s\n", version);
+#endif
+
+	i = pci_enable_device(pdev);
+	if (i)
+		return i;
+
+	i = pci_request_regions(pdev, "PC300");
+	if (i) {
+		pci_disable_device(pdev);
+		return i;
+	}
+
+	card = kmalloc(sizeof(card_t), GFP_KERNEL);
+	if (card == NULL) {
+		printk(KERN_ERR "pc300: unable to allocate memory\n");
+		pci_release_regions(pdev);
+		pci_disable_device(pdev);
+		return -ENOBUFS;
+	}
+	memset(card, 0, sizeof(card_t));
+	pci_set_drvdata(pdev, card);
+
+	if (pdev->device == PCI_DEVICE_ID_PC300_TE_1 ||
+	    pdev->device == PCI_DEVICE_ID_PC300_TE_2)
+		card->type = PC300_TE; /* not fully supported */
+	else if (card->init_ctrl_value & PC300_CTYPE_MASK)
+		card->type = PC300_X21;
+	else
+		card->type = PC300_RSV;
+
+	if (pdev->device == PCI_DEVICE_ID_PC300_RX_1 ||
+	    pdev->device == PCI_DEVICE_ID_PC300_TE_1)
+		card->n_ports = 1;
+	else
+		card->n_ports = 2;
+
+	for (i = 0; i < card->n_ports; i++)
+		if (!(card->ports[i].dev = alloc_hdlcdev(&card->ports[i]))) {
+			printk(KERN_ERR "pc300: unable to allocate memory\n");
+			pc300_pci_remove_one(pdev);
+			return -ENOMEM;
+		}
+
+	pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
+	if (pci_resource_len(pdev, 0) != PC300_PLX_SIZE ||
+	    pci_resource_len(pdev, 2) != PC300_SCA_SIZE ||
+	    pci_resource_len(pdev, 3) < 16384) {
+		printk(KERN_ERR "pc300: invalid card EEPROM parameters\n");
+		pc300_pci_remove_one(pdev);
+		return -EFAULT;
+	}
+
+	plxphys = pci_resource_start(pdev,0) & PCI_BASE_ADDRESS_MEM_MASK;
+	card->plxbase = ioremap(plxphys, PC300_PLX_SIZE);
+
+	scaphys = pci_resource_start(pdev,2) & PCI_BASE_ADDRESS_MEM_MASK;
+	card->scabase = ioremap(scaphys, PC300_SCA_SIZE);
+
+	ramphys = pci_resource_start(pdev,3) & PCI_BASE_ADDRESS_MEM_MASK;
+	card->rambase = ioremap(ramphys, pci_resource_len(pdev,3));
+
+	if (card->plxbase == NULL ||
+	    card->scabase == NULL ||
+	    card->rambase == NULL) {
+		printk(KERN_ERR "pc300: ioremap() failed\n");
+		pc300_pci_remove_one(pdev);
+	}
+
+	/* PLX PCI 9050 workaround for local configuration register read bug */
+	pci_write_config_dword(pdev, PCI_BASE_ADDRESS_0, scaphys);
+	card->init_ctrl_value = readl(&((plx9050*)card->scabase)->init_ctrl);
+	pci_write_config_dword(pdev, PCI_BASE_ADDRESS_0, plxphys);
+
+	/* Reset PLX */
+	p = &card->plxbase->init_ctrl;
+	writel(card->init_ctrl_value | 0x40000000, p);
+	readl(p);		/* Flush the write - do not use sca_flush */
+	udelay(1);
+
+	writel(card->init_ctrl_value, p);
+	readl(p);		/* Flush the write - do not use sca_flush */
+	udelay(1);
+
+	/* Reload Config. Registers from EEPROM */
+	writel(card->init_ctrl_value | 0x20000000, p);
+	readl(p);		/* Flush the write - do not use sca_flush */
+	udelay(1);
+
+	writel(card->init_ctrl_value, p);
+	readl(p);		/* Flush the write - do not use sca_flush */
+	udelay(1);
+
+	ramsize = sca_detect_ram(card, card->rambase,
+				 pci_resource_len(pdev, 3));
+
+	if (use_crystal_clock)
+		card->init_ctrl_value &= ~PC300_CLKSEL_MASK;
+	else
+		card->init_ctrl_value |= PC300_CLKSEL_MASK;
+
+	writel(card->init_ctrl_value, &card->plxbase->init_ctrl);
+	/* number of TX + RX buffers for one port */
+	i = ramsize / (card->n_ports * (sizeof(pkt_desc) + HDLC_MAX_MRU));
+	card->tx_ring_buffers = min(i / 2, MAX_TX_BUFFERS);
+	card->rx_ring_buffers = i - card->tx_ring_buffers;
+
+	card->buff_offset = card->n_ports * sizeof(pkt_desc) *
+		(card->tx_ring_buffers + card->rx_ring_buffers);
+
+	printk(KERN_INFO "pc300: PC300/%s, %u KB RAM at 0x%x, IRQ%u, "
+	       "using %u TX + %u RX packets rings\n",
+	       card->type == PC300_X21 ? "X21" :
+	       card->type == PC300_TE ? "TE" : "RSV",
+	       ramsize / 1024, ramphys, pdev->irq,
+	       card->tx_ring_buffers, card->rx_ring_buffers);
+
+	if (card->tx_ring_buffers < 1) {
+		printk(KERN_ERR "pc300: RAM test failed\n");
+		pc300_pci_remove_one(pdev);
+		return -EFAULT;
+	}
+
+	/* Enable interrupts on the PCI bridge, LINTi1 active low */
+	writew(0x0041, &card->plxbase->intr_ctrl_stat);
+
+	/* Allocate IRQ */
+	if (request_irq(pdev->irq, sca_intr, IRQF_SHARED, devname, card)) {
+		printk(KERN_WARNING "pc300: could not allocate IRQ%d.\n",
+		       pdev->irq);
+		pc300_pci_remove_one(pdev);
+		return -EBUSY;
+	}
+	card->irq = pdev->irq;
+
+	sca_init(card, 0);
+
+	// COTE not set - allows better TX DMA settings
+	// sca_out(sca_in(PCR, card) | PCR_COTE, PCR, card);
+
+	sca_out(0x10, BTCR, card);
+
+	for (i = 0; i < card->n_ports; i++) {
+		port_t *port = &card->ports[i];
+		struct net_device *dev = port_to_dev(port);
+		hdlc_device *hdlc = dev_to_hdlc(dev);
+		port->phy_node = i;
+
+		spin_lock_init(&port->lock);
+		SET_MODULE_OWNER(dev);
+		dev->irq = card->irq;
+		dev->mem_start = ramphys;
+		dev->mem_end = ramphys + ramsize - 1;
+		dev->tx_queue_len = 50;
+		dev->do_ioctl = pc300_ioctl;
+		dev->open = pc300_open;
+		dev->stop = pc300_close;
+		hdlc->attach = sca_attach;
+		hdlc->xmit = sca_xmit;
+		port->settings.clock_type = CLOCK_EXT;
+		port->card = card;
+		if (card->type == PC300_X21)
+			port->iface = IF_IFACE_X21;
+		else
+			port->iface = IF_IFACE_V35;
+
+		if (register_hdlc_device(dev)) {
+			printk(KERN_ERR "pc300: unable to register hdlc "
+			       "device\n");
+			port->card = NULL;
+			pc300_pci_remove_one(pdev);
+			return -ENOBUFS;
+		}
+		sca_init_sync_port(port);	/* Set up SCA memory */
+
+		printk(KERN_INFO "%s: PC300 node %d\n",
+		       dev->name, port->phy_node);
+	}
+	return 0;
+}
+
+
+
+static struct pci_device_id pc300_pci_tbl[] __devinitdata = {
+	{ PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_PC300_RX_1, PCI_ANY_ID,
+	  PCI_ANY_ID, 0, 0, 0 },
+	{ PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_PC300_RX_2, PCI_ANY_ID,
+	  PCI_ANY_ID, 0, 0, 0 },
+	{ PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_PC300_TE_1, PCI_ANY_ID,
+	  PCI_ANY_ID, 0, 0, 0 },
+	{ PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_PC300_TE_2, PCI_ANY_ID,
+	  PCI_ANY_ID, 0, 0, 0 },
+	{ 0, }
+};
+
+
+static struct pci_driver pc300_pci_driver = {
+	name:           "PC300",
+	id_table:       pc300_pci_tbl,
+	probe:          pc300_pci_init_one,
+	remove:         pc300_pci_remove_one,
+};
+
+
+static int __init pc300_init_module(void)
+{
+#ifdef MODULE
+	printk(KERN_INFO "%s\n", version);
+#endif
+	if (pci_clock_freq < 1000000 || pci_clock_freq > 80000000) {
+		printk(KERN_ERR "pc300: Invalid PCI clock frequency\n");
+		return -EINVAL;
+	}
+	if (use_crystal_clock != 0 && use_crystal_clock != 1) {
+		printk(KERN_ERR "pc300: Invalid 'use_crystal_clock' value\n");
+		return -EINVAL;
+	}
+
+	CLOCK_BASE = use_crystal_clock ? 24576000 : pci_clock_freq;
+
+	return pci_module_init(&pc300_pci_driver);
+}
+
+
+
+static void __exit pc300_cleanup_module(void)
+{
+	pci_unregister_driver(&pc300_pci_driver);
+}
+
+MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>");
+MODULE_DESCRIPTION("Cyclades PC300 serial port driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(pci, pc300_pci_tbl);
+module_param(pci_clock_freq, int, 0444);
+MODULE_PARM_DESC(pci_clock_freq, "System PCI clock frequency in Hz");
+module_param(use_crystal_clock, int, 0444);
+MODULE_PARM_DESC(use_crystal_clock,
+		 "Use 24.576 MHz clock instead of PCI clock");
+module_init(pc300_init_module);
+module_exit(pc300_cleanup_module);