diff options
author | Nick Kossifidis <mickflemm@gmail.com> | 2011-11-25 19:40:25 +0100 |
---|---|---|
committer | John W. Linville <linville@tuxdriver.com> | 2011-11-28 20:44:16 +0100 |
commit | c47faa364cfb249d5d7670fb7293a6f9acd8aa9e (patch) | |
tree | 6b81c368508e94966efec2ddcc412c6b2154a97e /drivers/net/wireless/ath/ath5k/pcu.c | |
parent | ath5k: Use usleep_range where possible (diff) | |
download | linux-c47faa364cfb249d5d7670fb7293a6f9acd8aa9e.tar.xz linux-c47faa364cfb249d5d7670fb7293a6f9acd8aa9e.zip |
ath5k: Cleanups v2 + add kerneldoc on all hw functions
No functional changes
Add kernel doc for all ath5k_hw_* functions and strcucts. Also do some cleanup,
rename ath5k_hw_init_beacon to ath5k_hw_init_beacon_timers, remove an unused
variable from ath5k_hw_pcu_init and a few obsolete macros, mostly related to XR.
Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers/net/wireless/ath/ath5k/pcu.c')
-rw-r--r-- | drivers/net/wireless/ath/ath5k/pcu.c | 222 |
1 files changed, 147 insertions, 75 deletions
diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c index a7eafa3edc21..cebfd6fd31d3 100644 --- a/drivers/net/wireless/ath/ath5k/pcu.c +++ b/drivers/net/wireless/ath/ath5k/pcu.c @@ -30,11 +30,47 @@ #include "reg.h" #include "debug.h" -/* +/** + * DOC: Protocol Control Unit (PCU) functions + * + * Protocol control unit is responsible to maintain various protocol + * properties before a frame is send and after a frame is received to/from + * baseband. To be more specific, PCU handles: + * + * - Buffering of RX and TX frames (after QCU/DCUs) + * + * - Encrypting and decrypting (using the built-in engine) + * + * - Generating ACKs, RTS/CTS frames + * + * - Maintaining TSF + * + * - FCS + * + * - Updating beacon data (with TSF etc) + * + * - Generating virtual CCA + * + * - RX/Multicast filtering + * + * - BSSID filtering + * + * - Various statistics + * + * -Different operating modes: AP, STA, IBSS + * + * Note: Most of these functions can be tweaked/bypassed so you can do + * them on sw above for debugging or research. For more infos check out PCU + * registers on reg.h. + */ + +/** + * DOC: ACK rates + * * AR5212+ can use higher rates for ack transmission * based on current tx rate instead of the base rate. * It does this to better utilize channel usage. - * This is a mapping between G rates (that cover both + * There is a mapping between G rates (that cover both * CCK and OFDM) and ack rates that we use when setting * rate -> duration table. This mapping is hw-based so * don't change anything. @@ -63,17 +99,18 @@ static const unsigned int ack_rates_high[] = \*******************/ /** - * ath5k_hw_get_frame_duration - Get tx time of a frame - * + * ath5k_hw_get_frame_duration() - Get tx time of a frame * @ah: The &struct ath5k_hw * @len: Frame's length in bytes * @rate: The @struct ieee80211_rate + * @shortpre: Indicate short preample * * Calculate tx duration of a frame given it's rate and length * It extends ieee80211_generic_frame_duration for non standard * bwmodes. */ -int ath5k_hw_get_frame_duration(struct ath5k_hw *ah, +int +ath5k_hw_get_frame_duration(struct ath5k_hw *ah, int len, struct ieee80211_rate *rate, bool shortpre) { int sifs, preamble, plcp_bits, sym_time; @@ -129,11 +166,11 @@ int ath5k_hw_get_frame_duration(struct ath5k_hw *ah, } /** - * ath5k_hw_get_default_slottime - Get the default slot time for current mode - * + * ath5k_hw_get_default_slottime() - Get the default slot time for current mode * @ah: The &struct ath5k_hw */ -unsigned int ath5k_hw_get_default_slottime(struct ath5k_hw *ah) +unsigned int +ath5k_hw_get_default_slottime(struct ath5k_hw *ah) { struct ieee80211_channel *channel = ah->ah_current_channel; unsigned int slot_time; @@ -160,11 +197,11 @@ unsigned int ath5k_hw_get_default_slottime(struct ath5k_hw *ah) } /** - * ath5k_hw_get_default_sifs - Get the default SIFS for current mode - * + * ath5k_hw_get_default_sifs() - Get the default SIFS for current mode * @ah: The &struct ath5k_hw */ -unsigned int ath5k_hw_get_default_sifs(struct ath5k_hw *ah) +unsigned int +ath5k_hw_get_default_sifs(struct ath5k_hw *ah) { struct ieee80211_channel *channel = ah->ah_current_channel; unsigned int sifs; @@ -191,17 +228,17 @@ unsigned int ath5k_hw_get_default_sifs(struct ath5k_hw *ah) } /** - * ath5k_hw_update_mib_counters - Update MIB counters (mac layer statistics) - * + * ath5k_hw_update_mib_counters() - Update MIB counters (mac layer statistics) * @ah: The &struct ath5k_hw * * Reads MIB counters from PCU and updates sw statistics. Is called after a * MIB interrupt, because one of these counters might have reached their maximum * and triggered the MIB interrupt, to let us read and clear the counter. * - * Is called in interrupt context! + * NOTE: Is called in interrupt context! */ -void ath5k_hw_update_mib_counters(struct ath5k_hw *ah) +void +ath5k_hw_update_mib_counters(struct ath5k_hw *ah) { struct ath5k_statistics *stats = &ah->stats; @@ -219,10 +256,8 @@ void ath5k_hw_update_mib_counters(struct ath5k_hw *ah) \******************/ /** - * ath5k_hw_write_rate_duration - fill rate code to duration table - * - * @ah: the &struct ath5k_hw - * @mode: one of enum ath5k_driver_mode + * ath5k_hw_write_rate_duration() - Fill rate code to duration table + * @ah: The &struct ath5k_hw * * Write the rate code to duration table upon hw reset. This is a helper for * ath5k_hw_pcu_init(). It seems all this is doing is setting an ACK timeout on @@ -236,7 +271,8 @@ void ath5k_hw_update_mib_counters(struct ath5k_hw *ah) * that include all OFDM and CCK rates. * */ -static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah) +static inline void +ath5k_hw_write_rate_duration(struct ath5k_hw *ah) { struct ieee80211_rate *rate; unsigned int i; @@ -280,12 +316,12 @@ static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah) } /** - * ath5k_hw_set_ack_timeout - Set ACK timeout on PCU - * + * ath5k_hw_set_ack_timeout() - Set ACK timeout on PCU * @ah: The &struct ath5k_hw * @timeout: Timeout in usec */ -static int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout) +static int +ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout) { if (ath5k_hw_clocktoh(ah, AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_ACK)) <= timeout) @@ -298,12 +334,12 @@ static int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout) } /** - * ath5k_hw_set_cts_timeout - Set CTS timeout on PCU - * + * ath5k_hw_set_cts_timeout() - Set CTS timeout on PCU * @ah: The &struct ath5k_hw * @timeout: Timeout in usec */ -static int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout) +static int +ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout) { if (ath5k_hw_clocktoh(ah, AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_CTS)) <= timeout) @@ -321,14 +357,14 @@ static int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout) \*******************/ /** - * ath5k_hw_set_lladdr - Set station id - * + * ath5k_hw_set_lladdr() - Set station id * @ah: The &struct ath5k_hw - * @mac: The card's mac address + * @mac: The card's mac address (array of octets) * * Set station id on hw using the provided mac address */ -int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac) +int +ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac) { struct ath_common *common = ath5k_hw_common(ah); u32 low_id, high_id; @@ -349,14 +385,14 @@ int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac) } /** - * ath5k_hw_set_bssid - Set current BSSID on hw - * + * ath5k_hw_set_bssid() - Set current BSSID on hw * @ah: The &struct ath5k_hw * * Sets the current BSSID and BSSID mask we have from the * common struct into the hardware */ -void ath5k_hw_set_bssid(struct ath5k_hw *ah) +void +ath5k_hw_set_bssid(struct ath5k_hw *ah) { struct ath_common *common = ath5k_hw_common(ah); u16 tim_offset = 0; @@ -389,7 +425,23 @@ void ath5k_hw_set_bssid(struct ath5k_hw *ah) ath5k_hw_enable_pspoll(ah, NULL, 0); } -void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask) +/** + * ath5k_hw_set_bssid_mask() - Filter out bssids we listen + * @ah: The &struct ath5k_hw + * @mask: The BSSID mask to set (array of octets) + * + * BSSID masking is a method used by AR5212 and newer hardware to inform PCU + * which bits of the interface's MAC address should be looked at when trying + * to decide which packets to ACK. In station mode and AP mode with a single + * BSS every bit matters since we lock to only one BSS. In AP mode with + * multiple BSSes (virtual interfaces) not every bit matters because hw must + * accept frames for all BSSes and so we tweak some bits of our mac address + * in order to have multiple BSSes. + * + * For more information check out ../hw.c of the common ath module. + */ +void +ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask) { struct ath_common *common = ath5k_hw_common(ah); @@ -400,18 +452,21 @@ void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask) ath_hw_setbssidmask(common); } -/* - * Set multicast filter +/** + * ath5k_hw_set_mcast_filter() - Set multicast filter + * @ah: The &struct ath5k_hw + * @filter0: Lower 32bits of muticast filter + * @filter1: Higher 16bits of multicast filter */ -void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1) +void +ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1) { ath5k_hw_reg_write(ah, filter0, AR5K_MCAST_FILTER0); ath5k_hw_reg_write(ah, filter1, AR5K_MCAST_FILTER1); } /** - * ath5k_hw_get_rx_filter - Get current rx filter - * + * ath5k_hw_get_rx_filter() - Get current rx filter * @ah: The &struct ath5k_hw * * Returns the RX filter by reading rx filter and @@ -420,7 +475,8 @@ void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1) * and pass to the driver. For a list of frame types * check out reg.h. */ -u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah) +u32 +ath5k_hw_get_rx_filter(struct ath5k_hw *ah) { u32 data, filter = 0; @@ -440,8 +496,7 @@ u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah) } /** - * ath5k_hw_set_rx_filter - Set rx filter - * + * ath5k_hw_set_rx_filter() - Set rx filter * @ah: The &struct ath5k_hw * @filter: RX filter mask (see reg.h) * @@ -449,7 +504,8 @@ u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah) * register on 5212 and newer chips so that we have proper PHY * error reporting. */ -void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter) +void +ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter) { u32 data = 0; @@ -493,13 +549,13 @@ void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter) #define ATH5K_MAX_TSF_READ 10 /** - * ath5k_hw_get_tsf64 - Get the full 64bit TSF - * + * ath5k_hw_get_tsf64() - Get the full 64bit TSF * @ah: The &struct ath5k_hw * * Returns the current TSF */ -u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah) +u64 +ath5k_hw_get_tsf64(struct ath5k_hw *ah) { u32 tsf_lower, tsf_upper1, tsf_upper2; int i; @@ -536,28 +592,30 @@ u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah) return ((u64)tsf_upper1 << 32) | tsf_lower; } +#undef ATH5K_MAX_TSF_READ + /** - * ath5k_hw_set_tsf64 - Set a new 64bit TSF - * + * ath5k_hw_set_tsf64() - Set a new 64bit TSF * @ah: The &struct ath5k_hw * @tsf64: The new 64bit TSF * * Sets the new TSF */ -void ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64) +void +ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64) { ath5k_hw_reg_write(ah, tsf64 & 0xffffffff, AR5K_TSF_L32); ath5k_hw_reg_write(ah, (tsf64 >> 32) & 0xffffffff, AR5K_TSF_U32); } /** - * ath5k_hw_reset_tsf - Force a TSF reset - * + * ath5k_hw_reset_tsf() - Force a TSF reset * @ah: The &struct ath5k_hw * * Forces a TSF reset on PCU */ -void ath5k_hw_reset_tsf(struct ath5k_hw *ah) +void +ath5k_hw_reset_tsf(struct ath5k_hw *ah) { u32 val; @@ -573,10 +631,17 @@ void ath5k_hw_reset_tsf(struct ath5k_hw *ah) ath5k_hw_reg_write(ah, val, AR5K_BEACON); } -/* - * Initialize beacon timers +/** + * ath5k_hw_init_beacon_timers() - Initialize beacon timers + * @ah: The &struct ath5k_hw + * @next_beacon: Next TBTT + * @interval: Current beacon interval + * + * This function is used to initialize beacon timers based on current + * operation mode and settings. */ -void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval) +void +ath5k_hw_init_beacon_timers(struct ath5k_hw *ah, u32 next_beacon, u32 interval) { u32 timer1, timer2, timer3; @@ -655,8 +720,7 @@ void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval) } /** - * ath5k_check_timer_win - Check if timer B is timer A + window - * + * ath5k_check_timer_win() - Check if timer B is timer A + window * @a: timer a (before b) * @b: timer b (after a) * @window: difference between a and b @@ -686,12 +750,11 @@ ath5k_check_timer_win(int a, int b, int window, int intval) } /** - * ath5k_hw_check_beacon_timers - Check if the beacon timers are correct - * + * ath5k_hw_check_beacon_timers() - Check if the beacon timers are correct * @ah: The &struct ath5k_hw * @intval: beacon interval * - * This is a workaround for IBSS mode: + * This is a workaround for IBSS mode * * The need for this function arises from the fact that we have 4 separate * HW timer registers (TIMER0 - TIMER3), which are closely related to the @@ -746,14 +809,14 @@ ath5k_hw_check_beacon_timers(struct ath5k_hw *ah, int intval) } /** - * ath5k_hw_set_coverage_class - Set IEEE 802.11 coverage class - * + * ath5k_hw_set_coverage_class() - Set IEEE 802.11 coverage class * @ah: The &struct ath5k_hw * @coverage_class: IEEE 802.11 coverage class number * * Sets IFS intervals and ACK/CTS timeouts for given coverage class. */ -void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class) +void +ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class) { /* As defined by IEEE 802.11-2007 17.3.8.6 */ int slot_time = ath5k_hw_get_default_slottime(ah) + 3 * coverage_class; @@ -772,8 +835,7 @@ void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class) \***************************/ /** - * ath5k_hw_start_rx_pcu - Start RX engine - * + * ath5k_hw_start_rx_pcu() - Start RX engine * @ah: The &struct ath5k_hw * * Starts RX engine on PCU so that hw can process RXed frames @@ -781,32 +843,33 @@ void ath5k_hw_set_coverage_class(struct ath5k_hw *ah, u8 coverage_class) * * NOTE: RX DMA should be already enabled using ath5k_hw_start_rx_dma */ -void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah) +void +ath5k_hw_start_rx_pcu(struct ath5k_hw *ah) { AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); } /** - * at5k_hw_stop_rx_pcu - Stop RX engine - * + * at5k_hw_stop_rx_pcu() - Stop RX engine * @ah: The &struct ath5k_hw * * Stops RX engine on PCU */ -void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah) +void +ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah) { AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX); } /** - * ath5k_hw_set_opmode - Set PCU operating mode - * + * ath5k_hw_set_opmode() - Set PCU operating mode * @ah: The &struct ath5k_hw - * @op_mode: &enum nl80211_iftype operating mode + * @op_mode: One of enum nl80211_iftype * * Configure PCU for the various operating modes (AP/STA etc) */ -int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype op_mode) +int +ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype op_mode) { struct ath_common *common = ath5k_hw_common(ah); u32 pcu_reg, beacon_reg, low_id, high_id; @@ -873,8 +936,17 @@ int ath5k_hw_set_opmode(struct ath5k_hw *ah, enum nl80211_iftype op_mode) return 0; } -void ath5k_hw_pcu_init(struct ath5k_hw *ah, enum nl80211_iftype op_mode, - u8 mode) +/** + * ath5k_hw_pcu_init() - Initialize PCU + * @ah: The &struct ath5k_hw + * @op_mode: One of enum nl80211_iftype + * @mode: One of enum ath5k_driver_mode + * + * This function is used to initialize PCU by setting current + * operation mode and various other settings. + */ +void +ath5k_hw_pcu_init(struct ath5k_hw *ah, enum nl80211_iftype op_mode) { /* Set bssid and bssid mask */ ath5k_hw_set_bssid(ah); |