Merge branch 'linus' into x86/xen

Conflicts:
	arch/x86/kernel/cpu/common.c
	arch/x86/kernel/process_64.c
	arch/x86/xen/enlighten.c

1 files changed, 409 insertions, 270 deletions

diff --git a/drivers/net/wireless/ath5k/reg.h b/drivers/net/wireless/ath5k/reg.h
index 7562bf173d3e..e557fe178bbf 100644
--- a/drivers/net/wireless/ath5k/reg.h
+++ b/drivers/net/wireless/ath5k/reg.h
@@ -1,7 +1,7 @@
 /*
- * Copyright (c) 2007 Nick Kossifidis <mickflemm@gmail.com>
- * Copyright (c) 2004, 2005, 2006, 2007 Reyk Floeter <reyk@openbsd.org>
- * Copyright (c) 2007 Michael Taylor <mike.taylor@apprion.com>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2007-2008 Michael Taylor <mike.taylor@apprion.com>
  *
  * Permission to use, copy, modify, and distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -29,6 +29,10 @@
  *        http://www.it.iitb.ac.in/~janak/wifire/01222734.pdf
  *
  * 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf
+ *
+ * This file also contains register values found on a memory dump of
+ * Atheros's ART program (Atheros Radio Test), on ath9k, on legacy-hal
+ * released by Atheros and on various debug messages found on the net.
  */
 
 
@@ -295,7 +299,7 @@
 #define AR5K_ISR_RXPHY		0x00004000	/* PHY error */
 #define AR5K_ISR_RXKCM		0x00008000	/* RX Key cache miss */
 #define AR5K_ISR_SWBA		0x00010000	/* Software beacon alert */
-#define AR5K_ISR_BRSSI		0x00020000
+#define AR5K_ISR_BRSSI		0x00020000	/* Beacon rssi below threshold (?) */
 #define AR5K_ISR_BMISS		0x00040000	/* Beacon missed */
 #define AR5K_ISR_HIUERR		0x00080000	/* Host Interface Unit error [5211+] */
 #define AR5K_ISR_BNR		0x00100000 	/* Beacon not ready [5211+] */
@@ -303,46 +307,56 @@
 #define AR5K_ISR_RXCHIRP	0x00200000	/* CHIRP Received [5212+] */
 #define AR5K_ISR_SSERR		0x00200000	/* Signaled System Error [5210] */
 #define AR5K_ISR_DPERR		0x00400000	/* Det par Error (?) [5210] */
-#define AR5K_ISR_TIM		0x00800000	/* [5210] */
-#define AR5K_ISR_BCNMISC	0x00800000	/* [5212+] */
-#define AR5K_ISR_GPIO		0x01000000	/* GPIO (rf kill)*/
-#define AR5K_ISR_QCBRORN	0x02000000	/* CBR overrun (?)  [5211+] */
-#define AR5K_ISR_QCBRURN	0x04000000	/* CBR underrun (?) [5211+] */
-#define AR5K_ISR_QTRIG		0x08000000	/* [5211+] */
+#define AR5K_ISR_RXDOPPLER	0x00400000	/* Doppler chirp received [5212+] */
+#define AR5K_ISR_TIM		0x00800000	/* [5211+] */
+#define AR5K_ISR_BCNMISC	0x00800000	/* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT,
+						CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */
+#define AR5K_ISR_GPIO		0x01000000	/* GPIO (rf kill) */
+#define AR5K_ISR_QCBRORN	0x02000000	/* QCU CBR overrun [5211+] */
+#define AR5K_ISR_QCBRURN	0x04000000	/* QCU CBR underrun [5211+] */
+#define AR5K_ISR_QTRIG		0x08000000	/* QCU scheduling trigger [5211+] */
 
 /*
  * Secondary status registers [5211+] (0 - 4)
  *
- * I guess from the names that these give the status for each
- * queue, that's why only masks are defined here, haven't got
- * any info about them (couldn't find them anywhere in ar5k code).
+ * These give the status for each QCU, only QCUs 0-9 are
+ * represented.
  */
 #define AR5K_SISR0		0x0084			/* Register Address [5211+] */
 #define AR5K_SISR0_QCU_TXOK	0x000003ff	/* Mask for QCU_TXOK */
+#define AR5K_SISR0_QCU_TXOK_S	0
 #define AR5K_SISR0_QCU_TXDESC	0x03ff0000	/* Mask for QCU_TXDESC */
+#define AR5K_SISR0_QCU_TXDESC_S	16
 
 #define AR5K_SISR1		0x0088			/* Register Address [5211+] */
 #define AR5K_SISR1_QCU_TXERR	0x000003ff	/* Mask for QCU_TXERR */
+#define AR5K_SISR1_QCU_TXERR_S	0
 #define AR5K_SISR1_QCU_TXEOL	0x03ff0000	/* Mask for QCU_TXEOL */
+#define AR5K_SISR1_QCU_TXEOL_S	16
 
 #define AR5K_SISR2		0x008c			/* Register Address [5211+] */
 #define AR5K_SISR2_QCU_TXURN	0x000003ff	/* Mask for QCU_TXURN */
+#define	AR5K_SISR2_QCU_TXURN_S	0
 #define	AR5K_SISR2_MCABT	0x00100000	/* Master Cycle Abort */
 #define	AR5K_SISR2_SSERR	0x00200000	/* Signaled System Error */
-#define	AR5K_SISR2_DPERR	0x00400000	/* Det par Error (?) */
+#define	AR5K_SISR2_DPERR	0x00400000	/* Bus parity error */
 #define	AR5K_SISR2_TIM		0x01000000	/* [5212+] */
 #define	AR5K_SISR2_CAB_END	0x02000000	/* [5212+] */
 #define	AR5K_SISR2_DTIM_SYNC	0x04000000	/* DTIM sync lost [5212+] */
 #define	AR5K_SISR2_BCN_TIMEOUT	0x08000000	/* Beacon Timeout [5212+] */
 #define	AR5K_SISR2_CAB_TIMEOUT	0x10000000	/* CAB Timeout [5212+] */
 #define	AR5K_SISR2_DTIM		0x20000000	/* [5212+] */
+#define	AR5K_SISR2_TSFOOR	0x80000000	/* TSF OOR (?) */
 
 #define AR5K_SISR3		0x0090			/* Register Address [5211+] */
 #define AR5K_SISR3_QCBRORN	0x000003ff	/* Mask for QCBRORN */
+#define AR5K_SISR3_QCBORN_S	0
 #define AR5K_SISR3_QCBRURN	0x03ff0000	/* Mask for QCBRURN */
+#define AR5K_SISR3_QCBRURN_S	16
 
 #define AR5K_SISR4		0x0094			/* Register Address [5211+] */
 #define AR5K_SISR4_QTRIG	0x000003ff	/* Mask for QTRIG */
+#define AR5K_SISR4_QTRIG_S	0
 
 /*
  * Shadow read-and-clear interrupt status registers [5211+]
@@ -379,7 +393,7 @@
 #define AR5K_IMR_RXPHY		0x00004000	/* PHY error*/
 #define AR5K_IMR_RXKCM		0x00008000	/* RX Key cache miss */
 #define AR5K_IMR_SWBA		0x00010000	/* Software beacon alert*/
-#define AR5K_IMR_BRSSI		0x00020000
+#define AR5K_IMR_BRSSI		0x00020000	/* Beacon rssi below threshold (?) */
 #define AR5K_IMR_BMISS		0x00040000	/* Beacon missed*/
 #define AR5K_IMR_HIUERR		0x00080000	/* Host Interface Unit error [5211+] */
 #define AR5K_IMR_BNR		0x00100000 	/* Beacon not ready [5211+] */
@@ -387,12 +401,14 @@
 #define AR5K_IMR_RXCHIRP	0x00200000	/* CHIRP Received [5212+]*/
 #define AR5K_IMR_SSERR		0x00200000	/* Signaled System Error [5210] */
 #define AR5K_IMR_DPERR		0x00400000	/* Det par Error (?) [5210] */
+#define AR5K_IMR_RXDOPPLER	0x00400000	/* Doppler chirp received [5212+] */
 #define AR5K_IMR_TIM		0x00800000	/* [5211+] */
-#define AR5K_IMR_BCNMISC	0x00800000	/* [5212+] */
+#define AR5K_IMR_BCNMISC	0x00800000	/* 'or' of TIM, CAB_END, DTIM_SYNC, BCN_TIMEOUT,
+						CAB_TIMEOUT and DTIM bits from SISR2 [5212+] */
 #define AR5K_IMR_GPIO		0x01000000	/* GPIO (rf kill)*/
-#define AR5K_IMR_QCBRORN	0x02000000	/* CBR overrun (?) [5211+] */
-#define AR5K_IMR_QCBRURN	0x04000000	/* CBR underrun (?) [5211+] */
-#define AR5K_IMR_QTRIG		0x08000000	/* [5211+] */
+#define AR5K_IMR_QCBRORN	0x02000000	/* QCU CBR overrun (?) [5211+] */
+#define AR5K_IMR_QCBRURN	0x04000000	/* QCU CBR underrun (?) [5211+] */
+#define AR5K_IMR_QTRIG		0x08000000	/* QCU scheduling trigger [5211+] */
 
 /*
  * Secondary interrupt mask registers [5211+] (0 - 4)
@@ -414,13 +430,14 @@
 #define AR5K_SIMR2_QCU_TXURN_S	0
 #define	AR5K_SIMR2_MCABT	0x00100000	/* Master Cycle Abort */
 #define	AR5K_SIMR2_SSERR	0x00200000	/* Signaled System Error */
-#define	AR5K_SIMR2_DPERR	0x00400000	/* Det par Error (?) */
+#define	AR5K_SIMR2_DPERR	0x00400000	/* Bus parity error */
 #define	AR5K_SIMR2_TIM		0x01000000	/* [5212+] */
 #define	AR5K_SIMR2_CAB_END	0x02000000	/* [5212+] */
 #define	AR5K_SIMR2_DTIM_SYNC	0x04000000	/* DTIM Sync lost [5212+] */
 #define	AR5K_SIMR2_BCN_TIMEOUT	0x08000000	/* Beacon Timeout [5212+] */
 #define	AR5K_SIMR2_CAB_TIMEOUT	0x10000000	/* CAB Timeout [5212+] */
 #define	AR5K_SIMR2_DTIM		0x20000000	/* [5212+] */
+#define	AR5K_SIMR2_TSFOOR	0x80000000	/* TSF OOR (?) */
 
 #define AR5K_SIMR3		0x00b0			/* Register Address [5211+] */
 #define AR5K_SIMR3_QCBRORN	0x000003ff	/* Mask for QCBRORN */
@@ -586,15 +603,15 @@
 #define	AR5K_QCU_MISC_FRSHED_M		0x0000000f	/* Frame sheduling mask */
 #define	AR5K_QCU_MISC_FRSHED_ASAP		0	/* ASAP */
 #define	AR5K_QCU_MISC_FRSHED_CBR		1	/* Constant Bit Rate */
-#define	AR5K_QCU_MISC_FRSHED_DBA_GT		2	/* DMA Beacon alert gated (?) */
-#define	AR5K_QCU_MISC_FRSHED_TIM_GT		3	/* Time gated (?) */
-#define	AR5K_QCU_MISC_FRSHED_BCN_SENT_GT	4	/* Beacon sent gated (?) */
+#define	AR5K_QCU_MISC_FRSHED_DBA_GT		2	/* DMA Beacon alert gated */
+#define	AR5K_QCU_MISC_FRSHED_TIM_GT		3	/* TIMT gated */
+#define	AR5K_QCU_MISC_FRSHED_BCN_SENT_GT	4	/* Beacon sent gated */
 #define	AR5K_QCU_MISC_ONESHOT_ENABLE	0x00000010	/* Oneshot enable */
-#define	AR5K_QCU_MISC_CBREXP		0x00000020	/* CBR expired (normal queue) */
-#define	AR5K_QCU_MISC_CBREXP_BCN	0x00000040	/* CBR expired (beacon queue) */
+#define	AR5K_QCU_MISC_CBREXP_DIS	0x00000020	/* Disable CBR expired counter (normal queue) */
+#define	AR5K_QCU_MISC_CBREXP_BCN_DIS	0x00000040	/* Disable CBR expired counter (beacon queue) */
 #define	AR5K_QCU_MISC_BCN_ENABLE	0x00000080	/* Enable Beacon use */
-#define	AR5K_QCU_MISC_CBR_THRES_ENABLE	0x00000100	/* CBR threshold enabled */
-#define	AR5K_QCU_MISC_RDY_VEOL_POLICY	0x00000200	/* TXE reset when RDYTIME enalbed */
+#define	AR5K_QCU_MISC_CBR_THRES_ENABLE	0x00000100	/* CBR expired threshold enabled */
+#define	AR5K_QCU_MISC_RDY_VEOL_POLICY	0x00000200	/* TXE reset when RDYTIME expired or VEOL */
 #define	AR5K_QCU_MISC_CBR_RESET_CNT	0x00000400	/* CBR threshold (counter) reset */
 #define	AR5K_QCU_MISC_DCU_EARLY		0x00000800	/* DCU early termination */
 #define AR5K_QCU_MISC_DCU_CMP_EN	0x00001000	/* Enable frame compression */
@@ -663,6 +680,7 @@
 #define	AR5K_DCU_LCL_IFS_CW_MAX_S	10
 #define	AR5K_DCU_LCL_IFS_AIFS		0x0ff00000	/* Arbitrated Interframe Space */
 #define	AR5K_DCU_LCL_IFS_AIFS_S		20
+#define	AR5K_DCU_LCL_IFS_AIFS_MAX	0xfc		/* Anything above that can cause DCU to hang */
 #define	AR5K_QUEUE_DFS_LOCAL_IFS(_q)	AR5K_QUEUE_REG(AR5K_DCU_LCL_IFS_BASE, _q)
 
 /*
@@ -691,11 +709,7 @@
 /*
  * DCU misc registers [5211+]
  *
- * For some of the registers i couldn't find in the code
- * (only backoff stuff is there realy) i tried to match the
- * names with 802.11e parameters etc, so i guess VIRTCOL here
- * means Virtual Collision and HCFPOLL means Hybrid Coordination
- * factor Poll (CF- Poll). Arbiter lockout control controls the
+ * Note: Arbiter lockout control controls the
  * behaviour on low priority queues when we have multiple queues
  * with pending frames. Intra-frame lockout means we wait until
  * the queue's current frame transmits (with post frame backoff and bursting)
@@ -705,15 +719,20 @@
  * No lockout means there is no special handling.
  */
 #define AR5K_DCU_MISC_BASE		0x1100			/* Register Address -Queue0 DCU_MISC */
-#define	AR5K_DCU_MISC_BACKOFF		0x000007ff	/* Mask for backoff threshold */
+#define	AR5K_DCU_MISC_BACKOFF		0x0000003f	/* Mask for backoff threshold */
+#define	AR5K_DCU_MISC_ETS_RTS_POL	0x00000040	/* End of transmission series
+							station RTS/data failure count
+							reset policy (?) */
+#define AR5K_DCU_MISC_ETS_CW_POL	0x00000080	/* End of transmission series
+							CW reset policy */
+#define	AR5K_DCU_MISC_FRAG_WAIT		0x00000100	/* Wait for next fragment */
 #define AR5K_DCU_MISC_BACKOFF_FRAG	0x00000200	/* Enable backoff while bursting */
 #define	AR5K_DCU_MISC_HCFPOLL_ENABLE	0x00000800	/* CF - Poll enable */
 #define	AR5K_DCU_MISC_BACKOFF_PERSIST	0x00001000	/* Persistent backoff */
 #define	AR5K_DCU_MISC_FRMPRFTCH_ENABLE	0x00002000	/* Enable frame pre-fetch */
 #define	AR5K_DCU_MISC_VIRTCOL		0x0000c000	/* Mask for Virtual Collision (?) */
-#define	AR5K_DCU_MISC_VIRTCOL_NORMAL		0
-#define	AR5K_DCU_MISC_VIRTCOL_MODIFIED		1
-#define	AR5K_DCU_MISC_VIRTCOL_IGNORE		2
+#define	AR5K_DCU_MISC_VIRTCOL_NORMAL	0
+#define	AR5K_DCU_MISC_VIRTCOL_IGNORE	1
 #define	AR5K_DCU_MISC_BCN_ENABLE	0x00010000	/* Enable Beacon use */
 #define	AR5K_DCU_MISC_ARBLOCK_CTL	0x00060000	/* Arbiter lockout control mask */
 #define	AR5K_DCU_MISC_ARBLOCK_CTL_S	17
@@ -768,8 +787,9 @@
 #define	AR5K_DCU_GBL_IFS_MISC_TURBO_MODE	0x00000008	/* Turbo mode */
 #define	AR5K_DCU_GBL_IFS_MISC_SIFS_DUR_USEC	0x000003f0	/* SIFS Duration mask */
 #define	AR5K_DCU_GBL_IFS_MISC_USEC_DUR		0x000ffc00	/* USEC Duration mask */
+#define	AR5K_DCU_GBL_IFS_MISC_USEC_DUR_S	10
 #define	AR5K_DCU_GBL_IFS_MISC_DCU_ARB_DELAY	0x00300000	/* DCU Arbiter delay mask */
-#define AR5K_DCU_GBL_IFS_MISC_SIFS_CNT_RST	0x00400000	/* SIFC cnt reset policy (?) */
+#define AR5K_DCU_GBL_IFS_MISC_SIFS_CNT_RST	0x00400000	/* SIFS cnt reset policy (?) */
 #define AR5K_DCU_GBL_IFS_MISC_AIFS_CNT_RST	0x00800000	/* AIFS cnt reset policy (?) */
 #define AR5K_DCU_GBL_IFS_MISC_RND_LFSR_SL_DIS	0x01000000	/* Disable random LFSR slice */
 
@@ -820,8 +840,6 @@
 #define AR5K_RESET_CTL_MAC	0x00000004	/* MAC reset (PCU+Baseband ?) [5210] */
 #define AR5K_RESET_CTL_PHY	0x00000008	/* PHY reset [5210] */
 #define AR5K_RESET_CTL_PCI	0x00000010	/* PCI Core reset (interrupts etc) */
-#define AR5K_RESET_CTL_CHIP	(AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_DMA |	\
-				AR5K_RESET_CTL_MAC | AR5K_RESET_CTL_PHY)
 
 /*
  * Sleep control register
@@ -833,9 +851,11 @@
 #define AR5K_SLEEP_CTL_SLE_S		16
 #define AR5K_SLEEP_CTL_SLE_WAKE		0x00000000	/* Force chip awake */
 #define AR5K_SLEEP_CTL_SLE_SLP		0x00010000	/* Force chip sleep */
-#define AR5K_SLEEP_CTL_SLE_ALLOW	0x00020000
+#define AR5K_SLEEP_CTL_SLE_ALLOW	0x00020000	/* Normal sleep policy */
 #define AR5K_SLEEP_CTL_SLE_UNITS	0x00000008	/* [5211+] */
-/* more bits */
+#define AR5K_SLEEP_CTL_DUR_TIM_POL	0x00040000	/* Sleep duration timing policy */
+#define AR5K_SLEEP_CTL_DUR_WRITE_POL	0x00080000	/* Sleep duration write policy */
+#define AR5K_SLEEP_CTL_SLE_POL		0x00100000	/* Sleep policy mode */
 
 /*
  * Interrupt pending register
@@ -851,27 +871,28 @@
 
 /*
  * PCI configuration register
+ * TODO: Fix LED stuff
  */
 #define AR5K_PCICFG			0x4010			/* Register Address */
 #define AR5K_PCICFG_EEAE		0x00000001	/* Eeprom access enable [5210] */
-#define	AR5K_PCICFG_SLEEP_CLOCK_EN	0x00000002	/* Enable sleep clock (?) */
+#define AR5K_PCICFG_SLEEP_CLOCK_EN	0x00000002	/* Enable sleep clock */
 #define AR5K_PCICFG_CLKRUNEN		0x00000004	/* CLKRUN enable [5211+] */
 #define AR5K_PCICFG_EESIZE		0x00000018	/* Mask for EEPROM size [5211+] */
 #define AR5K_PCICFG_EESIZE_S		3
 #define AR5K_PCICFG_EESIZE_4K		0		/* 4K */
 #define AR5K_PCICFG_EESIZE_8K		1		/* 8K */
 #define AR5K_PCICFG_EESIZE_16K		2		/* 16K */
-#define AR5K_PCICFG_EESIZE_FAIL		3		/* Failed to get size (?) [5211+] */
+#define AR5K_PCICFG_EESIZE_FAIL		3		/* Failed to get size [5211+] */
 #define AR5K_PCICFG_LED			0x00000060	/* Led status [5211+] */
 #define AR5K_PCICFG_LED_NONE		0x00000000	/* Default [5211+] */
 #define AR5K_PCICFG_LED_PEND		0x00000020	/* Scan / Auth pending */
 #define AR5K_PCICFG_LED_ASSOC		0x00000040	/* Associated */
 #define	AR5K_PCICFG_BUS_SEL		0x00000380	/* Mask for "bus select" [5211+] (?) */
-#define	AR5K_PCICFG_CBEFIX_DIS		0x00000400	/* Disable CBE fix (?) */
-#define AR5K_PCICFG_SL_INTEN		0x00000800	/* Enable interrupts when asleep (?) */
+#define AR5K_PCICFG_CBEFIX_DIS		0x00000400	/* Disable CBE fix */
+#define AR5K_PCICFG_SL_INTEN		0x00000800	/* Enable interrupts when asleep */
 #define AR5K_PCICFG_LED_BCTL		0x00001000	/* Led blink (?) [5210] */
-#define	AR5K_PCICFG_UNK			0x00001000	/* Passed on some parts durring attach (?) */
-#define AR5K_PCICFG_SL_INPEN		0x00002000	/* Sleep even whith pending interrupts (?) */
+#define AR5K_PCICFG_RETRY_FIX		0x00001000	/* Enable pci core retry fix */
+#define AR5K_PCICFG_SL_INPEN		0x00002000	/* Sleep even whith pending interrupts*/
 #define AR5K_PCICFG_SPWR_DN		0x00010000	/* Mask for power status */
 #define AR5K_PCICFG_LEDMODE		0x000e0000	/* Ledmode [5211+] */
 #define AR5K_PCICFG_LEDMODE_PROP	0x00000000	/* Blink on standard traffic [5211+] */
@@ -884,7 +905,8 @@
 #define AR5K_PCICFG_LEDSTATE				\
 	(AR5K_PCICFG_LED | AR5K_PCICFG_LEDMODE |	\
 	AR5K_PCICFG_LEDBLINK | AR5K_PCICFG_LEDSLOW)
-#define	AR5K_PCICFG_SLEEP_CLOCK_RATE	0x03000000	/* Sleep clock rate (field) */
+#define	AR5K_PCICFG_SLEEP_CLOCK_RATE	0x03000000	/* Sleep clock rate */
+#define	AR5K_PCICFG_SLEEP_CLOCK_RATE_S	24
 
 /*
  * "General Purpose Input/Output" (GPIO) control register
@@ -906,8 +928,8 @@
 
 #define AR5K_GPIOCR		0x4014				/* Register Address */
 #define AR5K_GPIOCR_INT_ENA	0x00008000		/* Enable GPIO interrupt */
-#define AR5K_GPIOCR_INT_SELL	0x00000000		/* Generate interrupt when pin is off (?) */
-#define AR5K_GPIOCR_INT_SELH	0x00010000		/* Generate interrupt when pin is on */
+#define AR5K_GPIOCR_INT_SELL	0x00000000		/* Generate interrupt when pin is low */
+#define AR5K_GPIOCR_INT_SELH	0x00010000		/* Generate interrupt when pin is high */
 #define AR5K_GPIOCR_IN(n)	(0 << ((n) * 2))	/* Mode 0 for pin n */
 #define AR5K_GPIOCR_OUT0(n)	(1 << ((n) * 2))	/* Mode 1 for pin n */
 #define AR5K_GPIOCR_OUT1(n)	(2 << ((n) * 2))	/* Mode 2 for pin n */
@@ -925,7 +947,6 @@
 #define AR5K_GPIODI	0x401c
 #define AR5K_GPIODI_M	0x0000002f
 
-
 /*
  * Silicon revision register
  */
@@ -935,7 +956,59 @@
 #define AR5K_SREV_VER		0x000000ff	/* Mask for version */
 #define AR5K_SREV_VER_S		4
 
+/*
+ * TXE write posting register
+ */
+#define	AR5K_TXEPOST	0x4028
+
+/*
+ * QCU sleep mask
+ */
+#define	AR5K_QCU_SLEEP_MASK	0x402c
+
+/* 0x4068 is compression buffer configuration
+ * register on 5414 and pm configuration register
+ * on 5424 and newer pci-e chips. */
+
+/*
+ * Compression buffer configuration
+ * register (enable/disable) [5414]
+ */
+#define AR5K_5414_CBCFG		0x4068
+#define AR5K_5414_CBCFG_BUF_DIS	0x10	/* Disable buffer */
+
+/*
+ * PCI-E Power managment configuration
+ * and status register [5424+]
+ */
+#define	AR5K_PCIE_PM_CTL		0x4068			/* Register address */
+/* Only 5424 */
+#define	AR5K_PCIE_PM_CTL_L1_WHEN_D2	0x00000001	/* enable PCIe core enter L1
+							when d2_sleep_en is asserted */
+#define	AR5K_PCIE_PM_CTL_L0_L0S_CLEAR	0x00000002	/* Clear L0 and L0S counters */
+#define	AR5K_PCIE_PM_CTL_L0_L0S_EN	0x00000004	/* Start L0 nd L0S counters */
+#define	AR5K_PCIE_PM_CTL_LDRESET_EN	0x00000008	/* Enable reset when link goes
+							down */
+/* Wake On Wireless */
+#define	AR5K_PCIE_PM_CTL_PME_EN		0x00000010	/* PME Enable */
+#define	AR5K_PCIE_PM_CTL_AUX_PWR_DET	0x00000020	/* Aux power detect */
+#define	AR5K_PCIE_PM_CTL_PME_CLEAR	0x00000040	/* Clear PME */
+#define	AR5K_PCIE_PM_CTL_PSM_D0		0x00000080
+#define	AR5K_PCIE_PM_CTL_PSM_D1		0x00000100
+#define	AR5K_PCIE_PM_CTL_PSM_D2		0x00000200
+#define	AR5K_PCIE_PM_CTL_PSM_D3		0x00000400
+
+/*
+ * PCI-E Workaround enable register
+ */
+#define	AR5K_PCIE_WAEN	0x407c
 
+/*
+ * PCI-E Serializer/Desirializer
+ * registers
+ */
+#define	AR5K_PCIE_SERDES	0x4080
+#define	AR5K_PCIE_SERDES_RESET	0x4084
 
 /*====EEPROM REGISTERS====*/
 
@@ -977,98 +1050,6 @@
 #define AR5K_EEPROM_BASE	0x6000
 
 /*
- * Common ar5xxx EEPROM data offsets (set these on AR5K_EEPROM_BASE)
- */
-#define AR5K_EEPROM_MAGIC		0x003d	/* EEPROM Magic number */
-#define AR5K_EEPROM_MAGIC_VALUE		0x5aa5	/* Default - found on EEPROM */
-#define AR5K_EEPROM_MAGIC_5212		0x0000145c /* 5212 */
-#define AR5K_EEPROM_MAGIC_5211		0x0000145b /* 5211 */
-#define AR5K_EEPROM_MAGIC_5210		0x0000145a /* 5210 */
-
-#define AR5K_EEPROM_PROTECT		0x003f	/* EEPROM protect status */
-#define AR5K_EEPROM_PROTECT_RD_0_31	0x0001	/* Read protection bit for offsets 0x0 - 0x1f */
-#define AR5K_EEPROM_PROTECT_WR_0_31	0x0002	/* Write protection bit for offsets 0x0 - 0x1f */
-#define AR5K_EEPROM_PROTECT_RD_32_63	0x0004	/* 0x20 - 0x3f */
-#define AR5K_EEPROM_PROTECT_WR_32_63	0x0008
-#define AR5K_EEPROM_PROTECT_RD_64_127	0x0010	/* 0x40 - 0x7f */
-#define AR5K_EEPROM_PROTECT_WR_64_127	0x0020
-#define AR5K_EEPROM_PROTECT_RD_128_191	0x0040	/* 0x80 - 0xbf (regdom) */
-#define AR5K_EEPROM_PROTECT_WR_128_191	0x0080
-#define AR5K_EEPROM_PROTECT_RD_192_207	0x0100	/* 0xc0 - 0xcf */
-#define AR5K_EEPROM_PROTECT_WR_192_207	0x0200
-#define AR5K_EEPROM_PROTECT_RD_208_223	0x0400	/* 0xd0 - 0xdf */
-#define AR5K_EEPROM_PROTECT_WR_208_223	0x0800
-#define AR5K_EEPROM_PROTECT_RD_224_239	0x1000	/* 0xe0 - 0xef */
-#define AR5K_EEPROM_PROTECT_WR_224_239	0x2000
-#define AR5K_EEPROM_PROTECT_RD_240_255	0x4000	/* 0xf0 - 0xff */
-#define AR5K_EEPROM_PROTECT_WR_240_255	0x8000
-#define AR5K_EEPROM_REG_DOMAIN		0x00bf	/* EEPROM regdom */
-#define AR5K_EEPROM_INFO_BASE		0x00c0	/* EEPROM header */
-#define AR5K_EEPROM_INFO_MAX		(0x400 - AR5K_EEPROM_INFO_BASE)
-#define AR5K_EEPROM_INFO_CKSUM		0xffff
-#define AR5K_EEPROM_INFO(_n)		(AR5K_EEPROM_INFO_BASE + (_n))
-
-#define AR5K_EEPROM_VERSION		AR5K_EEPROM_INFO(1)	/* EEPROM Version */
-#define AR5K_EEPROM_VERSION_3_0		0x3000	/* No idea what's going on before this version */
-#define AR5K_EEPROM_VERSION_3_1		0x3001	/* ob/db values for 2Ghz (ar5211_rfregs) */
-#define AR5K_EEPROM_VERSION_3_2		0x3002	/* different frequency representation (eeprom_bin2freq) */
-#define AR5K_EEPROM_VERSION_3_3		0x3003	/* offsets changed, has 32 CTLs (see below) and ee_false_detect (eeprom_read_modes) */
-#define AR5K_EEPROM_VERSION_3_4		0x3004	/* has ee_i_gain ee_cck_ofdm_power_delta (eeprom_read_modes) */
-#define AR5K_EEPROM_VERSION_4_0		0x4000	/* has ee_misc*, ee_cal_pier, ee_turbo_max_power and ee_xr_power (eeprom_init) */
-#define AR5K_EEPROM_VERSION_4_1		0x4001	/* has ee_margin_tx_rx (eeprom_init) */
-#define AR5K_EEPROM_VERSION_4_2		0x4002	/* has ee_cck_ofdm_gain_delta (eeprom_init) */
-#define AR5K_EEPROM_VERSION_4_3		0x4003
-#define AR5K_EEPROM_VERSION_4_4		0x4004
-#define AR5K_EEPROM_VERSION_4_5		0x4005
-#define AR5K_EEPROM_VERSION_4_6		0x4006	/* has ee_scaled_cck_delta */
-#define AR5K_EEPROM_VERSION_4_7		0x4007
-
-#define AR5K_EEPROM_MODE_11A		0
-#define AR5K_EEPROM_MODE_11B		1
-#define AR5K_EEPROM_MODE_11G		2
-
-#define AR5K_EEPROM_HDR			AR5K_EEPROM_INFO(2)	/* Header that contains the device caps */
-#define AR5K_EEPROM_HDR_11A(_v)		(((_v) >> AR5K_EEPROM_MODE_11A) & 0x1)
-#define AR5K_EEPROM_HDR_11B(_v)		(((_v) >> AR5K_EEPROM_MODE_11B) & 0x1)
-#define AR5K_EEPROM_HDR_11G(_v)		(((_v) >> AR5K_EEPROM_MODE_11G) & 0x1)
-#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v)	(((_v) >> 3) & 0x1)	/* Disable turbo for 2Ghz (?) */
-#define AR5K_EEPROM_HDR_T_5GHZ_DBM(_v)	(((_v) >> 4) & 0x7f)	/* Max turbo power for a/XR mode (eeprom_init) */
-#define AR5K_EEPROM_HDR_DEVICE(_v)	(((_v) >> 11) & 0x7)
-#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v)	(((_v) >> 15) & 0x1)	/* Disable turbo for 5Ghz (?) */
-#define AR5K_EEPROM_HDR_RFKILL(_v)	(((_v) >> 14) & 0x1)	/* Device has RFKill support */
-
-#define AR5K_EEPROM_RFKILL_GPIO_SEL	0x0000001c
-#define AR5K_EEPROM_RFKILL_GPIO_SEL_S	2
-#define AR5K_EEPROM_RFKILL_POLARITY	0x00000002
-#define AR5K_EEPROM_RFKILL_POLARITY_S	1
-
-/* Newer EEPROMs are using a different offset */
-#define AR5K_EEPROM_OFF(_v, _v3_0, _v3_3) \
-	(((_v) >= AR5K_EEPROM_VERSION_3_3) ? _v3_3 : _v3_0)
-
-#define AR5K_EEPROM_ANT_GAIN(_v)	AR5K_EEPROM_OFF(_v, 0x00c4, 0x00c3)
-#define AR5K_EEPROM_ANT_GAIN_5GHZ(_v)	((int8_t)(((_v) >> 8) & 0xff))
-#define AR5K_EEPROM_ANT_GAIN_2GHZ(_v)	((int8_t)((_v) & 0xff))
-
-/* calibration settings */
-#define AR5K_EEPROM_MODES_11A(_v)	AR5K_EEPROM_OFF(_v, 0x00c5, 0x00d4)
-#define AR5K_EEPROM_MODES_11B(_v)	AR5K_EEPROM_OFF(_v, 0x00d0, 0x00f2)
-#define AR5K_EEPROM_MODES_11G(_v)	AR5K_EEPROM_OFF(_v, 0x00da, 0x010d)
-#define AR5K_EEPROM_CTL(_v)		AR5K_EEPROM_OFF(_v, 0x00e4, 0x0128)	/* Conformance test limits */
-
-/* [3.1 - 3.3] */
-#define AR5K_EEPROM_OBDB0_2GHZ		0x00ec
-#define AR5K_EEPROM_OBDB1_2GHZ		0x00ed
-
-/* Misc values available since EEPROM 4.0 */
-#define AR5K_EEPROM_MISC0		0x00c4
-#define AR5K_EEPROM_EARSTART(_v)	((_v) & 0xfff)
-#define AR5K_EEPROM_EEMAP(_v)		(((_v) >> 14) & 0x3)
-#define AR5K_EEPROM_MISC1		0x00c5
-#define AR5K_EEPROM_TARGET_PWRSTART(_v)	((_v) & 0xfff)
-#define AR5K_EEPROM_HAS32KHZCRYSTAL(_v)	(((_v) >> 14) & 0x1)
-
-/*
  * EEPROM data register
  */
 #define AR5K_EEPROM_DATA_5211	0x6004
@@ -1100,14 +1081,28 @@
  * EEPROM config register
  */
 #define AR5K_EEPROM_CFG			0x6010			/* Register Addres */
-#define AR5K_EEPROM_CFG_SIZE_OVR	0x00000001
+#define AR5K_EEPROM_CFG_SIZE		0x00000003		/* Size determination override */
+#define AR5K_EEPROM_CFG_SIZE_AUTO	0
+#define AR5K_EEPROM_CFG_SIZE_4KBIT	1
+#define AR5K_EEPROM_CFG_SIZE_8KBIT	2
+#define AR5K_EEPROM_CFG_SIZE_16KBIT	3
 #define AR5K_EEPROM_CFG_WR_WAIT_DIS	0x00000004	/* Disable write wait */
 #define AR5K_EEPROM_CFG_CLK_RATE	0x00000018	/* Clock rate */
-#define AR5K_EEPROM_CFG_PROT_KEY	0x00ffff00	/* Protectio key */
+#define AR5K_EEPROM_CFG_CLK_RATE_S		3
+#define AR5K_EEPROM_CFG_CLK_RATE_156KHZ	0
+#define AR5K_EEPROM_CFG_CLK_RATE_312KHZ	1
+#define AR5K_EEPROM_CFG_CLK_RATE_625KHZ	2
+#define AR5K_EEPROM_CFG_PROT_KEY	0x00ffff00      /* Protection key */
+#define AR5K_EEPROM_CFG_PROT_KEY_S	8
 #define AR5K_EEPROM_CFG_LIND_EN		0x01000000	/* Enable length indicator (?) */
 
 
 /*
+ * TODO: Wake On Wireless registers
+ * Range 0x7000 - 0x7ce0
+ */
+
+/*
  * Protocol Control Unit (PCU) registers
  */
 /*
@@ -1139,11 +1134,13 @@
 #define AR5K_STA_ID1_DESC_ANTENNA	0x00400000	/* Update antenna from descriptor */
 #define AR5K_STA_ID1_RTS_DEF_ANTENNA	0x00800000	/* Use default antenna for RTS */
 #define AR5K_STA_ID1_ACKCTS_6MB		0x01000000	/* Use 6Mbit/s for ACK/CTS */
-#define AR5K_STA_ID1_BASE_RATE_11B	0x02000000	/* Use 11b base rate (for ACK/CTS ?) [5211+] */
-#define AR5K_STA_ID1_SELF_GEN_SECTORE	0x04000000	/* Self generate sectore (?) */
+#define AR5K_STA_ID1_BASE_RATE_11B	0x02000000	/* Use 11b base rate for ACK/CTS [5211+] */
+#define AR5K_STA_ID1_SELFGEN_DEF_ANT	0x04000000	/* Use def. antenna for self generated frames */
 #define AR5K_STA_ID1_CRYPT_MIC_EN	0x08000000	/* Enable MIC */
-#define AR5K_STA_ID1_KEYSRCH_MODE	0x10000000	/* Keysearch mode (?) */
+#define AR5K_STA_ID1_KEYSRCH_MODE	0x10000000	/* Look up key when key id != 0 */
 #define AR5K_STA_ID1_PRESERVE_SEQ_NUM	0x20000000	/* Preserve sequence number */
+#define AR5K_STA_ID1_CBCIV_ENDIAN	0x40000000	/* ??? */
+#define AR5K_STA_ID1_KEYSRCH_MCAST	0x80000000	/* Do key cache search for mcast frames */
 
 /*
  * First BSSID register (MAC address, lower 32bits)
@@ -1402,16 +1399,16 @@
 #define AR5K_DIAG_SW_LOOP_BACK_5211	0x00000040
 #define AR5K_DIAG_SW_LOOP_BACK		(ah->ah_version == AR5K_AR5210 ? \
 					AR5K_DIAG_SW_LOOP_BACK_5210 : AR5K_DIAG_SW_LOOP_BACK_5211)
-#define AR5K_DIAG_SW_CORR_FCS_5210	0x00000100
+#define AR5K_DIAG_SW_CORR_FCS_5210	0x00000100	/* Corrupted FCS */
 #define AR5K_DIAG_SW_CORR_FCS_5211	0x00000080
 #define AR5K_DIAG_SW_CORR_FCS		(ah->ah_version == AR5K_AR5210 ? \
 					AR5K_DIAG_SW_CORR_FCS_5210 : AR5K_DIAG_SW_CORR_FCS_5211)
-#define AR5K_DIAG_SW_CHAN_INFO_5210	0x00000200
+#define AR5K_DIAG_SW_CHAN_INFO_5210	0x00000200	/* Dump channel info */
 #define AR5K_DIAG_SW_CHAN_INFO_5211	0x00000100
 #define AR5K_DIAG_SW_CHAN_INFO		(ah->ah_version == AR5K_AR5210 ? \
 					AR5K_DIAG_SW_CHAN_INFO_5210 : AR5K_DIAG_SW_CHAN_INFO_5211)
-#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211	0x00000200	/* Enable scrambler seed */
-#define AR5K_DIAG_SW_EN_SCRAM_SEED_5210	0x00000400
+#define AR5K_DIAG_SW_EN_SCRAM_SEED_5210	0x00000400	/* Enable fixed scrambler seed */
+#define AR5K_DIAG_SW_EN_SCRAM_SEED_5211	0x00000200
 #define AR5K_DIAG_SW_EN_SCRAM_SEED	(ah->ah_version == AR5K_AR5210 ? \
 					AR5K_DIAG_SW_EN_SCRAM_SEED_5210 : AR5K_DIAG_SW_EN_SCRAM_SEED_5211)
 #define AR5K_DIAG_SW_ECO_ENABLE		0x00000400	/* [5211+] */
@@ -1420,12 +1417,15 @@
 #define AR5K_DIAG_SW_SCRAM_SEED_S	10
 #define AR5K_DIAG_SW_DIS_SEQ_INC	0x00040000	/* Disable seqnum increment (?)[5210] */
 #define AR5K_DIAG_SW_FRAME_NV0_5210	0x00080000
-#define AR5K_DIAG_SW_FRAME_NV0_5211	0x00020000
+#define AR5K_DIAG_SW_FRAME_NV0_5211	0x00020000	/* Accept frames of non-zero protocol number */
 #define	AR5K_DIAG_SW_FRAME_NV0		(ah->ah_version == AR5K_AR5210 ? \
 					AR5K_DIAG_SW_FRAME_NV0_5210 : AR5K_DIAG_SW_FRAME_NV0_5211)
-#define AR5K_DIAG_SW_OBSPT_M		0x000c0000
+#define AR5K_DIAG_SW_OBSPT_M		0x000c0000	/* Observation point select (?) */
 #define AR5K_DIAG_SW_OBSPT_S		18
-/* more bits */
+#define AR5K_DIAG_SW_RX_CLEAR_HIGH	0x0010000	/* Force RX Clear high */
+#define AR5K_DIAG_SW_IGNORE_CARR_SENSE	0x0020000	/* Ignore virtual carrier sense */
+#define AR5K_DIAG_SW_CHANEL_IDLE_HIGH	0x0040000	/* Force channel idle high */
+#define AR5K_DIAG_SW_PHEAR_ME		0x0080000	/* ??? */
 
 /*
  * TSF (clock) register (lower 32 bits)
@@ -1636,16 +1636,16 @@
  *
  * XXX: PCDAC steps (0.5dbm) or DBM ?
  *
- * XXX: Mask changes for newer chips to 7f
- *      like tx power table ?
  */
 #define AR5K_TXPC			0x80e8			/* Register Address */
-#define AR5K_TXPC_ACK_M			0x0000003f	/* Mask for ACK tx power */
+#define AR5K_TXPC_ACK_M			0x0000003f	/* ACK tx power */
 #define AR5K_TXPC_ACK_S			0
-#define AR5K_TXPC_CTS_M			0x00003f00	/* Mask for CTS tx power */
+#define AR5K_TXPC_CTS_M			0x00003f00	/* CTS tx power */
 #define AR5K_TXPC_CTS_S			8
-#define AR5K_TXPC_CHIRP_M		0x003f0000	/* Mask for CHIRP tx power */
-#define AR5K_TXPC_CHIRP_S		22
+#define AR5K_TXPC_CHIRP_M		0x003f0000	/* CHIRP tx power */
+#define AR5K_TXPC_CHIRP_S		16
+#define AR5K_TXPC_DOPPLER		0x0f000000	/* Doppler chirp span (?) */
+#define AR5K_TXPC_DOPPLER_S		24
 
 /*
  * Profile count registers
@@ -1656,14 +1656,19 @@
 #define AR5K_PROFCNT_CYCLE		0x80f8	/* Cycle count (?) */
 
 /*
- * Quiet (period) control registers (?)
+ * Quiet period control registers
  */
 #define AR5K_QUIET_CTL1			0x80fc			/* Register Address */
-#define AR5K_QUIET_CTL1_NEXT_QT		0x0000ffff	/* Mask for next quiet (period?) (?) */
-#define AR5K_QUIET_CTL1_QT_EN		0x00010000	/* Enable quiet (period?) */
+#define AR5K_QUIET_CTL1_NEXT_QT_TSF	0x0000ffff	/* Next quiet period TSF (TU) */
+#define AR5K_QUIET_CTL1_NEXT_QT_TSF_S	0
+#define AR5K_QUIET_CTL1_QT_EN		0x00010000	/* Enable quiet period */
+#define AR5K_QUIET_CTL1_ACK_CTS_EN	0x00020000	/* Send ACK/CTS during quiet period */
+
 #define AR5K_QUIET_CTL2			0x8100			/* Register Address */
-#define AR5K_QUIET_CTL2_QT_PER		0x0000ffff	/* Mask for quiet period (?) */
-#define AR5K_QUIET_CTL2_QT_DUR		0xffff0000	/* Mask for quiet duration (?) */
+#define AR5K_QUIET_CTL2_QT_PER		0x0000ffff	/* Mask for quiet period periodicity */
+#define AR5K_QUIET_CTL2_QT_PER_S	0
+#define AR5K_QUIET_CTL2_QT_DUR		0xffff0000	/* Mask for quiet period duration */
+#define AR5K_QUIET_CTL2_QT_DUR_S	16
 
 /*
  * TSF parameter register
@@ -1673,12 +1678,15 @@
 #define AR5K_TSF_PARM_INC_S		0
 
 /*
- * QoS register (?)
+ * QoS NOACK policy
  */
-#define AR5K_QOS			0x8108			/* Register Address */
-#define AR5K_QOS_NOACK_2BIT_VALUES	0x00000000	/* (field) */
-#define AR5K_QOS_NOACK_BIT_OFFSET	0x00000020	/* (field) */
-#define AR5K_QOS_NOACK_BYTE_OFFSET	0x00000080	/* (field) */
+#define AR5K_QOS_NOACK			0x8108			/* Register Address */
+#define AR5K_QOS_NOACK_2BIT_VALUES	0x0000000f	/* ??? */
+#define AR5K_QOS_NOACK_2BIT_VALUES_S	0
+#define AR5K_QOS_NOACK_BIT_OFFSET	0x00000070	/* ??? */
+#define AR5K_QOS_NOACK_BIT_OFFSET_S	4
+#define AR5K_QOS_NOACK_BYTE_OFFSET	0x00000180	/* ??? */
+#define AR5K_QOS_NOACK_BYTE_OFFSET_S	8
 
 /*
  * PHY error filter register
@@ -1702,29 +1710,15 @@
 /*
  * MIC QoS control register (?)
  */
-#define	AR5K_MIC_QOS_CTL	0x8118			/* Register Address */
-#define	AR5K_MIC_QOS_CTL_0	0x00000001	/* MIC QoS control 0 (?) */
-#define	AR5K_MIC_QOS_CTL_1	0x00000004	/* MIC QoS control 1 (?) */
-#define	AR5K_MIC_QOS_CTL_2	0x00000010	/* MIC QoS control 2 (?) */
-#define	AR5K_MIC_QOS_CTL_3	0x00000040	/* MIC QoS control 3 (?) */
-#define	AR5K_MIC_QOS_CTL_4	0x00000100	/* MIC QoS control 4 (?) */
-#define	AR5K_MIC_QOS_CTL_5	0x00000400	/* MIC QoS control 5 (?) */
-#define	AR5K_MIC_QOS_CTL_6	0x00001000	/* MIC QoS control 6 (?) */
-#define	AR5K_MIC_QOS_CTL_7	0x00004000	/* MIC QoS control 7 (?) */
-#define	AR5K_MIC_QOS_CTL_MQ_EN	0x00010000	/* Enable MIC QoS */
+#define	AR5K_MIC_QOS_CTL		0x8118			/* Register Address */
+#define	AR5K_MIC_QOS_CTL_OFF(_n)	(1 << (_n * 2))
+#define	AR5K_MIC_QOS_CTL_MQ_EN		0x00010000	/* Enable MIC QoS */
 
 /*
  * MIC QoS select register (?)
  */
-#define	AR5K_MIC_QOS_SEL	0x811c
-#define	AR5K_MIC_QOS_SEL_0	0x00000001
-#define	AR5K_MIC_QOS_SEL_1	0x00000010
-#define	AR5K_MIC_QOS_SEL_2	0x00000100
-#define	AR5K_MIC_QOS_SEL_3	0x00001000
-#define	AR5K_MIC_QOS_SEL_4	0x00010000
-#define	AR5K_MIC_QOS_SEL_5	0x00100000
-#define	AR5K_MIC_QOS_SEL_6	0x01000000
-#define	AR5K_MIC_QOS_SEL_7	0x10000000
+#define	AR5K_MIC_QOS_SEL		0x811c
+#define	AR5K_MIC_QOS_SEL_OFF(_n)	(1 << (_n * 4))
 
 /*
  * Misc mode control register (?)
@@ -1759,6 +1753,11 @@
 #define	AR5K_TSF_THRES			0x813c
 
 /*
+ * TODO: Wake On Wireless registers
+ * Range: 0x8147 - 0x818c
+ */
+
+/*
  * Rate -> ACK SIFS mapping table (32 entries)
  */
 #define	AR5K_RATE_ACKSIFS_BASE		0x8680			/* Register Address */
@@ -1873,7 +1872,8 @@
  */
 #define	AR5K_PHY_TURBO			0x9804			/* Register Address */
 #define	AR5K_PHY_TURBO_MODE		0x00000001	/* Enable turbo mode */
-#define	AR5K_PHY_TURBO_SHORT		0x00000002	/* Short mode (20Mhz channels) (?) */
+#define	AR5K_PHY_TURBO_SHORT		0x00000002	/* Set short symbols to turbo mode */
+#define	AR5K_PHY_TURBO_MIMO		0x00000004	/* Set turbo for mimo mimo */
 
 /*
  * PHY agility command register
@@ -1883,6 +1883,11 @@
 #define	AR5K_PHY_TST1			0x9808
 #define	AR5K_PHY_AGC_DISABLE		0x08000000	/* Disable AGC to A2 (?)*/
 #define	AR5K_PHY_TST1_TXHOLD		0x00003800	/* Set tx hold (?) */
+#define	AR5K_PHY_TST1_TXSRC_SRC		0x00000002	/* Used with bit 7 (?) */
+#define	AR5K_PHY_TST1_TXSRC_SRC_S	1
+#define	AR5K_PHY_TST1_TXSRC_ALT		0x00000080	/* Set input to tsdac (?) */
+#define	AR5K_PHY_TST1_TXSRC_ALT_S	7
+
 
 /*
  * PHY timing register 3 [5112+]
@@ -1907,15 +1912,23 @@
 
 /*
  * PHY RF control registers
- * (i think these are delay times,
- * these calibration values exist
- * in EEPROM)
  */
 #define AR5K_PHY_RF_CTL2		0x9824			/* Register Address */
-#define	AR5K_PHY_RF_CTL2_TXF2TXD_START	0x0000000f	/* Mask for TX frame to TX d(esc?) start */
+#define	AR5K_PHY_RF_CTL2_TXF2TXD_START	0x0000000f	/* TX frame to TX data start */
+#define	AR5K_PHY_RF_CTL2_TXF2TXD_START_S	0
 
 #define AR5K_PHY_RF_CTL3		0x9828			/* Register Address */
-#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON	0x0000000f	/* Mask for TX end to XLNA on */
+#define AR5K_PHY_RF_CTL3_TXE2XLNA_ON	0x0000000f	/* TX end to XLNA on */
+#define	AR5K_PHY_RF_CTL3_TXE2XLNA_ON_S	0
+
+#define	AR5K_PHY_ADC_CTL			0x982c
+#define	AR5K_PHY_ADC_CTL_INBUFGAIN_OFF		0x00000003
+#define	AR5K_PHY_ADC_CTL_INBUFGAIN_OFF_S	0
+#define	AR5K_PHY_ADC_CTL_PWD_DAC_OFF		0x00002000
+#define	AR5K_PHY_ADC_CTL_PWD_BAND_GAP_OFF	0x00004000
+#define	AR5K_PHY_ADC_CTL_PWD_ADC_OFF		0x00008000
+#define	AR5K_PHY_ADC_CTL_INBUFGAIN_ON		0x00030000
+#define	AR5K_PHY_ADC_CTL_INBUFGAIN_ON_S		16
 
 #define AR5K_PHY_RF_CTL4		0x9834			/* Register Address */
 #define AR5K_PHY_RF_CTL4_TXF2XPA_A_ON	0x00000001	/* TX frame to XPA A on (field) */
@@ -1937,35 +1950,43 @@
  * PHY settling register
  */
 #define AR5K_PHY_SETTLING		0x9844			/* Register Address */
-#define	AR5K_PHY_SETTLING_AGC		0x0000007f	/* Mask for AGC settling time */
-#define	AR5K_PHY_SETTLING_SWITCH	0x00003f80	/* Mask for Switch settlig time */
+#define	AR5K_PHY_SETTLING_AGC		0x0000007f	/* AGC settling time */
+#define	AR5K_PHY_SETTLING_AGC_S		0
+#define	AR5K_PHY_SETTLING_SWITCH	0x00003f80	/* Switch settlig time */
+#define	AR5K_PHY_SETTLINK_SWITCH_S	7
 
 /*
  * PHY Gain registers
  */
 #define AR5K_PHY_GAIN			0x9848			/* Register Address */
-#define	AR5K_PHY_GAIN_TXRX_ATTEN	0x0003f000	/* Mask for TX-RX Attenuation */
+#define	AR5K_PHY_GAIN_TXRX_ATTEN	0x0003f000	/* TX-RX Attenuation */
+#define	AR5K_PHY_GAIN_TXRX_ATTEN_S	12
+#define	AR5K_PHY_GAIN_TXRX_RF_MAX	0x007c0000
+#define	AR5K_PHY_GAIN_TXRX_RF_MAX_S	18
 
 #define	AR5K_PHY_GAIN_OFFSET		0x984c			/* Register Address */
 #define	AR5K_PHY_GAIN_OFFSET_RXTX_FLAG	0x00020000	/* RX-TX flag (?) */
 
 /*
- * Desired size register
+ * Desired ADC/PGA size register
  * (for more infos read ANI patent)
  */
 #define AR5K_PHY_DESIRED_SIZE		0x9850			/* Register Address */
-#define	AR5K_PHY_DESIRED_SIZE_ADC	0x000000ff	/* Mask for ADC desired size */
-#define	AR5K_PHY_DESIRED_SIZE_PGA	0x0000ff00	/* Mask for PGA desired size */
-#define	AR5K_PHY_DESIRED_SIZE_TOT	0x0ff00000	/* Mask for Total desired size (?) */
+#define	AR5K_PHY_DESIRED_SIZE_ADC	0x000000ff	/* ADC desired size */
+#define	AR5K_PHY_DESIRED_SIZE_ADC_S	0
+#define	AR5K_PHY_DESIRED_SIZE_PGA	0x0000ff00	/* PGA desired size */
+#define	AR5K_PHY_DESIRED_SIZE_PGA_S	8
+#define	AR5K_PHY_DESIRED_SIZE_TOT	0x0ff00000	/* Total desired size */
+#define	AR5K_PHY_DESIRED_SIZE_TOT_S	20
 
 /*
  * PHY signal register
  * (for more infos read ANI patent)
  */
 #define	AR5K_PHY_SIG			0x9858			/* Register Address */
-#define	AR5K_PHY_SIG_FIRSTEP		0x0003f000	/* Mask for FIRSTEP */
+#define	AR5K_PHY_SIG_FIRSTEP		0x0003f000	/* FIRSTEP */
 #define	AR5K_PHY_SIG_FIRSTEP_S		12
-#define	AR5K_PHY_SIG_FIRPWR		0x03fc0000	/* Mask for FIPWR */
+#define	AR5K_PHY_SIG_FIRPWR		0x03fc0000	/* FIPWR */
 #define	AR5K_PHY_SIG_FIRPWR_S		18
 
 /*
@@ -1973,9 +1994,9 @@
  * (for more infos read ANI patent)
  */
 #define	AR5K_PHY_AGCCOARSE		0x985c			/* Register Address */
-#define	AR5K_PHY_AGCCOARSE_LO		0x00007f80	/* Mask for AGC Coarse low */
+#define	AR5K_PHY_AGCCOARSE_LO		0x00007f80	/* AGC Coarse low */
 #define	AR5K_PHY_AGCCOARSE_LO_S		7
-#define	AR5K_PHY_AGCCOARSE_HI		0x003f8000	/* Mask for AGC Coarse high */
+#define	AR5K_PHY_AGCCOARSE_HI		0x003f8000	/* AGC Coarse high */
 #define	AR5K_PHY_AGCCOARSE_HI_S		15
 
 /*
@@ -1984,6 +2005,8 @@
 #define	AR5K_PHY_AGCCTL			0x9860			/* Register address */
 #define	AR5K_PHY_AGCCTL_CAL		0x00000001	/* Enable PHY calibration */
 #define	AR5K_PHY_AGCCTL_NF		0x00000002	/* Enable Noise Floor calibration */
+#define	AR5K_PHY_AGCCTL_NF_EN		0x00008000	/* Enable nf calibration to happen (?) */
+#define	AR5K_PHY_AGCCTL_NF_NOUPDATE	0x00020000	/* Don't update nf automaticaly */
 
 /*
  * PHY noise floor status register
@@ -1994,7 +2017,10 @@
 #define AR5K_PHY_NF_RVAL(_n)		(((_n) >> 19) & AR5K_PHY_NF_M)
 #define AR5K_PHY_NF_AVAL(_n)		(-((_n) ^ AR5K_PHY_NF_M) + 1)
 #define AR5K_PHY_NF_SVAL(_n)		(((_n) & AR5K_PHY_NF_M) | (1 << 9))
-#define	AR5K_PHY_NF_THRESH62		0x00001000	/* Thresh62 -check ANI patent- (field) */
+#define	AR5K_PHY_NF_THRESH62		0x0007f000	/* Thresh62 -check ANI patent- (field) */
+#define	AR5K_PHY_NF_THRESH62_S		12
+#define	AR5K_PHY_NF_MINCCA_PWR		0x0ff80000	/* ??? */
+#define	AR5K_PHY_NF_MINCCA_PWR_S	19
 
 /*
  * PHY ADC saturation register [5110]
@@ -2034,24 +2060,31 @@
  */
 #define AR5K_PHY_SCR			0x9870
 #define AR5K_PHY_SCR_32MHZ		0x0000001f
+
 #define AR5K_PHY_SLMT			0x9874
 #define AR5K_PHY_SLMT_32MHZ		0x0000007f
+
 #define AR5K_PHY_SCAL			0x9878
 #define AR5K_PHY_SCAL_32MHZ		0x0000000e
 
+
 /*
  * PHY PLL (Phase Locked Loop) control register
  */
 #define	AR5K_PHY_PLL			0x987c
-#define	AR5K_PHY_PLL_20MHZ		0x13	/* For half rate (?) [5111+] */
-#define	AR5K_PHY_PLL_40MHZ_5211		0x18	/* For 802.11a */
+#define	AR5K_PHY_PLL_20MHZ		0x00000013	/* For half rate (?) */
+/* 40MHz -> 5GHz band */
+#define	AR5K_PHY_PLL_40MHZ_5211		0x00000018
 #define	AR5K_PHY_PLL_40MHZ_5212		0x000000aa
+#define	AR5K_PHY_PLL_40MHZ_5413		0x00000004
 #define	AR5K_PHY_PLL_40MHZ		(ah->ah_version == AR5K_AR5211 ? \
 					AR5K_PHY_PLL_40MHZ_5211 : AR5K_PHY_PLL_40MHZ_5212)
-#define	AR5K_PHY_PLL_44MHZ_5211		0x19	/* For 802.11b/g */
+/* 44MHz -> 2.4GHz band */
+#define	AR5K_PHY_PLL_44MHZ_5211		0x00000019
 #define	AR5K_PHY_PLL_44MHZ_5212		0x000000ab
 #define	AR5K_PHY_PLL_44MHZ		(ah->ah_version == AR5K_AR5211 ? \
 					AR5K_PHY_PLL_44MHZ_5211 : AR5K_PHY_PLL_44MHZ_5212)
+
 #define AR5K_PHY_PLL_RF5111		0x00000000
 #define AR5K_PHY_PLL_RF5112		0x00000040
 #define	AR5K_PHY_PLL_HALF_RATE		0x00000100
@@ -2118,6 +2151,19 @@
 #define AR5K_PHY_RFSTG_DISABLE		0x00000021
 
 /*
+ * BIN masks (?)
+ */
+#define	AR5K_PHY_BIN_MASK_1	0x9900
+#define	AR5K_PHY_BIN_MASK_2	0x9904
+#define	AR5K_PHY_BIN_MASK_3	0x9908
+
+#define	AR5K_PHY_BIN_MASK_CTL		0x990c
+#define	AR5K_PHY_BIN_MASK_CTL_MASK_4	0x00003fff
+#define	AR5K_PHY_BIN_MASK_CTL_MASK_4_S	0
+#define	AR5K_PHY_BIN_MASK_CTL_RATE	0xff000000
+#define	AR5K_PHY_BIN_MASK_CTL_RATE_S	24
+
+/*
  * PHY Antenna control register
  */
 #define AR5K_PHY_ANT_CTL		0x9910			/* Register Address */
@@ -2164,6 +2210,7 @@
 #define	AR5K_PHY_OFDM_SELFCORR			0x9924			/* Register Address */
 #define	AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_EN	0x00000001	/* Enable cyclic RSSI thr 1 */
 #define	AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1	0x000000fe	/* Mask for Cyclic RSSI threshold 1 */
+#define	AR5K_PHY_OFDM_SELFCORR_CYPWR_THR1_S	0
 #define	AR5K_PHY_OFDM_SELFCORR_CYPWR_THR3	0x00000100	/* Cyclic RSSI threshold 3 (field) (?) */
 #define	AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR_EN	0x00008000	/* Enable 1A RSSI threshold (?) */
 #define	AR5K_PHY_OFDM_SELFCORR_RSSI_1ATHR	0x00010000	/* 1A RSSI threshold (field) (?) */
@@ -2210,7 +2257,6 @@
 #define	AR5K_PHY_PAPD_PROBE_INI_5111	0x00004883	/* [5212+] */
 #define	AR5K_PHY_PAPD_PROBE_INI_5112	0x00004882	/* [5212+] */
 
-
 /*
  * PHY TX rate power registers [5112+]
  */
@@ -2232,6 +2278,8 @@
 #define	AR5K_PHY_FRAME_CTL_TX_CLIP	0x00000038	/* Mask for tx clip (?) */
 #define	AR5K_PHY_FRAME_CTL_TX_CLIP_S	3
 #define	AR5K_PHY_FRAME_CTL_PREP_CHINFO	0x00010000	/* Prepend chan info */
+#define	AR5K_PHY_FRAME_CTL_EMU		0x80000000
+#define	AR5K_PHY_FRAME_CTL_EMU_S	31
 /*---[5110/5111]---*/
 #define	AR5K_PHY_FRAME_CTL_TIMING_ERR	0x01000000	/* PHY timing error */
 #define	AR5K_PHY_FRAME_CTL_PARITY_ERR	0x02000000	/* Parity error */
@@ -2250,48 +2298,36 @@
  * PHY radar detection register [5111+]
  */
 #define	AR5K_PHY_RADAR			0x9954
-
-/* Radar enable 			........ ........ ........ .......1 */
 #define	AR5K_PHY_RADAR_ENABLE		0x00000001
-#define	AR5K_PHY_RADAR_DISABLE          0x00000000
-#define	AR5K_PHY_RADAR_ENABLE_S		0
-
-/* This is the value found on the card  .1.111.1 .1.1.... 111....1 1...1...
-at power on. */
-#define	AR5K_PHY_RADAR_PWONDEF_AR5213	0x5d50e188
-
-/* This is the value found on the card 	.1.1.111 ..11...1 .1...1.1 1...11.1
-after DFS is enabled */
-#define	AR5K_PHY_RADAR_ENABLED_AR5213	0x5731458d
-
-/* Finite Impulse Response (FIR) filter .1111111 ........ ........ ........
- * power out threshold.
- * 7-bits, standard power range {0..127} in 1/2 dBm units. */
-#define AR5K_PHY_RADAR_FIRPWROUTTHR    	0x7f000000
-#define AR5K_PHY_RADAR_FIRPWROUTTHR_S	24
-
-/* Radar RSSI/SNR threshold.		........ 111111.. ........ ........
- * 6-bits, dBm range {0..63} in dBm units. */
-#define AR5K_PHY_RADAR_RADARRSSITHR    	0x00fc0000
-#define AR5K_PHY_RADAR_RADARRSSITHR_S	18
-
-/* Pulse height threshold 		........ ......11 1111.... ........
- * 6-bits, dBm range {0..63} in dBm units. */
-#define AR5K_PHY_RADAR_PULSEHEIGHTTHR   0x0003f000
-#define AR5K_PHY_RADAR_PULSEHEIGHTTHR_S	12
-
-/* Pulse RSSI/SNR threshold		........ ........ ....1111 11......
- * 6-bits, dBm range {0..63} in dBm units. */
-#define AR5K_PHY_RADAR_PULSERSSITHR    	0x00000fc0
-#define AR5K_PHY_RADAR_PULSERSSITHR_S	6
-
-/* Inband threshold  			........ ........ ........ ..11111.
- * 5-bits, units unknown {0..31} (? MHz ?) */
-#define AR5K_PHY_RADAR_INBANDTHR    	0x0000003e
+#define	AR5K_PHY_RADAR_DISABLE		0x00000000
+#define AR5K_PHY_RADAR_INBANDTHR    	0x0000003e	/* Inband threshold
+							5-bits, units unknown {0..31}
+							(? MHz ?) */
 #define AR5K_PHY_RADAR_INBANDTHR_S	1
 
+#define AR5K_PHY_RADAR_PRSSI_THR    	0x00000fc0	/* Pulse RSSI/SNR threshold
+							6-bits, dBm range {0..63}
+							in dBm units. */
+#define AR5K_PHY_RADAR_PRSSI_THR_S	6
+
+#define AR5K_PHY_RADAR_PHEIGHT_THR   	0x0003f000	/* Pulse height threshold
+							6-bits, dBm range {0..63}
+							in dBm units. */
+#define AR5K_PHY_RADAR_PHEIGHT_THR_S	12
+
+#define AR5K_PHY_RADAR_RSSI_THR    	0x00fc0000	/* Radar RSSI/SNR threshold.
+							6-bits, dBm range {0..63}
+							in dBm units. */
+#define AR5K_PHY_RADAR_RSSI_THR_S	18
+
+#define AR5K_PHY_RADAR_FIRPWR_THR	0x7f000000	/* Finite Impulse Response
+							filter power out threshold.
+							7-bits, standard power range
+							{0..127} in 1/2 dBm units. */
+#define AR5K_PHY_RADAR_FIRPWR_THRS	24
+
 /*
- * PHY antenna switch table registers [5110]
+ * PHY antenna switch table registers
  */
 #define AR5K_PHY_ANT_SWITCH_TABLE_0	0x9960
 #define AR5K_PHY_ANT_SWITCH_TABLE_1	0x9964
@@ -2302,25 +2338,65 @@ after DFS is enabled */
 #define AR5K_PHY_NFTHRES		0x9968
 
 /*
- * PHY clock sleep registers [5112+]
+ * Sigma Delta register (?) [5213]
  */
-#define AR5K_PHY_SCLOCK			0x99f0
-#define AR5K_PHY_SCLOCK_32MHZ		0x0000000c
-#define AR5K_PHY_SDELAY			0x99f4
-#define AR5K_PHY_SDELAY_32MHZ		0x000000ff
-#define AR5K_PHY_SPENDING		0x99f8
-#define	AR5K_PHY_SPENDING_14		0x00000014
-#define	AR5K_PHY_SPENDING_18		0x00000018
-#define AR5K_PHY_SPENDING_RF5111	0x00000018
-#define AR5K_PHY_SPENDING_RF5112	0x00000014
-/* #define AR5K_PHY_SPENDING_RF5112A	0x0000000e */
-/* #define AR5K_PHY_SPENDING_RF5424	0x00000012 */
-#define	AR5K_PHY_SPENDING_RF5413	0x00000014
-#define	AR5K_PHY_SPENDING_RF2413	0x00000014
-#define AR5K_PHY_SPENDING_RF2425	0x00000018
+#define AR5K_PHY_SIGMA_DELTA		0x996C
+#define AR5K_PHY_SIGMA_DELTA_ADC_SEL	0x00000003
+#define AR5K_PHY_SIGMA_DELTA_ADC_SEL_S	0
+#define AR5K_PHY_SIGMA_DELTA_FILT2	0x000000f8
+#define AR5K_PHY_SIGMA_DELTA_FILT2_S	3
+#define AR5K_PHY_SIGMA_DELTA_FILT1	0x00001f00
+#define AR5K_PHY_SIGMA_DELTA_FILT1_S	8
+#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP	0x01ff3000
+#define AR5K_PHY_SIGMA_DELTA_ADC_CLIP_S	13
+
+/*
+ * RF restart register [5112+] (?)
+ */
+#define AR5K_PHY_RESTART		0x9970		/* restart */
+#define AR5K_PHY_RESTART_DIV_GC		0x001c0000	/* Fast diversity gc_limit (?) */
+#define AR5K_PHY_RESTART_DIV_GC_S	18
+
+/*
+ * RF Bus access request register (for synth-oly channel switching)
+ */
+#define AR5K_PHY_RFBUS_REQ		0x997C
+#define AR5K_PHY_RFBUS_REQ_REQUEST	0x00000001
+
+/*
+ * Spur mitigation masks (?)
+ */
+#define AR5K_PHY_TIMING_7		0x9980
+#define AR5K_PHY_TIMING_8		0x9984
+#define AR5K_PHY_TIMING_8_PILOT_MASK_2		0x000fffff
+#define AR5K_PHY_TIMING_8_PILOT_MASK_2_S	0
+
+#define AR5K_PHY_BIN_MASK2_1		0x9988
+#define AR5K_PHY_BIN_MASK2_2		0x998c
+#define AR5K_PHY_BIN_MASK2_3		0x9990
+
+#define AR5K_PHY_BIN_MASK2_4		0x9994
+#define AR5K_PHY_BIN_MASK2_4_MASK_4	0x00003fff
+#define AR5K_PHY_BIN_MASK2_4_MASK_4_S	0
+
+#define AR_PHY_TIMING_9			0x9998
+#define AR_PHY_TIMING_10		0x999c
+#define AR_PHY_TIMING_10_PILOT_MASK_2	0x000fffff
+#define AR_PHY_TIMING_10_PILOT_MASK_2_S	0
+
+/*
+ * Spur mitigation control
+ */
+#define AR_PHY_TIMING_11			0x99a0		/* Register address */
+#define AR_PHY_TIMING_11_SPUR_DELTA_PHASE	0x000fffff	/* Spur delta phase */
+#define AR_PHY_TIMING_11_SPUR_DELTA_PHASE_S	0
+#define AR_PHY_TIMING_11_SPUR_FREQ_SD		0x3ff00000	/* Freq sigma delta */
+#define AR_PHY_TIMING_11_SPUR_FREQ_SD_S	20
+#define AR_PHY_TIMING_11_USE_SPUR_IN_AGC	0x40000000	/* Spur filter in AGC detector */
+#define AR_PHY_TIMING_11_USE_SPUR_IN_SELFCOR	0x80000000	/* Spur filter in OFDM self correlator */
 
 /*
- * Misc PHY/radio registers [5110 - 5111]
+ * Gain tables
  */
 #define	AR5K_BB_GAIN_BASE		0x9b00	/* BaseBand Amplifier Gain table base address */
 #define AR5K_BB_GAIN(_n)		(AR5K_BB_GAIN_BASE + ((_n) << 2))
@@ -2340,9 +2416,10 @@ after DFS is enabled */
 #define	AR5K_PHY_CURRENT_RSSI	0x9c1c
 
 /*
- * PHY RF Bus grant register (?)
+ * PHY RF Bus grant register
  */
 #define	AR5K_PHY_RFBUS_GRANT	0x9c20
+#define	AR5K_PHY_RFBUS_GRANT_OK	0x00000001
 
 /*
  * PHY ADC test register
@@ -2386,6 +2463,31 @@ after DFS is enabled */
 #define	AR5K_PHY_CHAN_STATUS_RX_CLR_PAP	0x00000008
 
 /*
+ * Heavy clip enable register
+ */
+#define	AR5K_PHY_HEAVY_CLIP_ENABLE	0x99e0
+
+/*
+ * PHY clock sleep registers [5112+]
+ */
+#define AR5K_PHY_SCLOCK			0x99f0
+#define AR5K_PHY_SCLOCK_32MHZ		0x0000000c
+#define AR5K_PHY_SDELAY			0x99f4
+#define AR5K_PHY_SDELAY_32MHZ		0x000000ff
+#define AR5K_PHY_SPENDING		0x99f8
+#define AR5K_PHY_SPENDING_14		0x00000014
+#define AR5K_PHY_SPENDING_18		0x00000018
+#define AR5K_PHY_SPENDING_RF5111	0x00000018
+#define AR5K_PHY_SPENDING_RF5112	0x00000014
+/* #define AR5K_PHY_SPENDING_RF5112A	0x0000000e */
+/* #define AR5K_PHY_SPENDING_RF5424	0x00000012 */
+#define AR5K_PHY_SPENDING_RF5413	0x00000018
+#define AR5K_PHY_SPENDING_RF2413	0x00000018
+#define AR5K_PHY_SPENDING_RF2316	0x00000018
+#define AR5K_PHY_SPENDING_RF2317	0x00000018
+#define AR5K_PHY_SPENDING_RF2425	0x00000014
+
+/*
  * PHY PAPD I (power?) table (?)
  * (92! entries)
  */
@@ -2436,10 +2538,47 @@ after DFS is enabled */
 #define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR	0x0000000f
 #define AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR_S	0
 
+/* Same address is used for antenna diversity activation */
+#define	AR5K_PHY_FAST_ANT_DIV		0xa208
+#define	AR5K_PHY_FAST_ANT_DIV_EN	0x00002000
+
 /*
  * PHY 2GHz gain register [5111+]
  */
-#define	AR5K_PHY_GAIN_2GHZ		0xa20c
-#define	AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX	0x00fc0000
+#define	AR5K_PHY_GAIN_2GHZ			0xa20c
+#define	AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX		0x00fc0000
 #define	AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX_S	18
-#define	AR5K_PHY_GAIN_2GHZ_INI_5111	0x6480416c
+#define	AR5K_PHY_GAIN_2GHZ_INI_5111		0x6480416c
+
+#define	AR5K_PHY_CCK_RX_CTL_4			0xa21c
+#define	AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT	0x01f80000
+#define	AR5K_PHY_CCK_RX_CTL_4_FREQ_EST_SHORT_S	19
+
+#define	AR5K_PHY_DAG_CCK_CTL			0xa228
+#define	AR5K_PHY_DAG_CCK_CTL_EN_RSSI_THR	0x00000200
+#define	AR5K_PHY_DAG_CCK_CTL_RSSI_THR		0x0001fc00
+#define	AR5K_PHY_DAG_CCK_CTL_RSSI_THR_S		10
+
+#define	AR5K_PHY_FAST_ADC	0xa24c
+
+#define	AR5K_PHY_BLUETOOTH	0xa254
+
+/*
+ * Transmit Power Control register
+ * [2413+]
+ */
+#define	AR5K_PHY_TPC_RG1		0xa258
+#define	AR5K_PHY_TPC_RG1_NUM_PD_GAIN	0x0000c000
+#define	AR5K_PHY_TPC_RG1_NUM_PD_GAIN_S	14
+
+#define	AR5K_PHY_TPC_RG5			0xa26C
+#define	AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP	0x0000000F
+#define	AR5K_PHY_TPC_RG5_PD_GAIN_OVERLAP_S	0
+#define	AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1	0x000003F0
+#define	AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_1_S	4
+#define	AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2	0x0000FC00
+#define	AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_2_S	10
+#define	AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3	0x003F0000
+#define	AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_3_S	16
+#define	AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4	0x0FC00000
+#define	AR5K_PHY_TPC_RG5_PD_GAIN_BOUNDARY_4_S	22