summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/iwlegacy/iwl-4965-tx.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-01-18 00:35:37 +0100
committerH. Peter Anvin <hpa@zytor.com>2012-01-18 00:46:51 +0100
commit68f30fbee19cc67849b9fa8e153ede70758afe81 (patch)
tree873beabac00418f3c3bb2f2c92cc04b5d80dd238 /drivers/net/wireless/iwlegacy/iwl-4965-tx.c
parentx86, opcode: ANDN and Group 17 in x86-opcode-map.txt (diff)
downloadlinux-68f30fbee19cc67849b9fa8e153ede70758afe81.tar.xz
linux-68f30fbee19cc67849b9fa8e153ede70758afe81.zip
x86, tsc: Fix SMI induced variation in quick_pit_calibrate()
pit_expect_msb() returns success wrongly in the below SMI scenario: a. pit_verify_msb() has not yet seen the MSB transition. b. we are close to the MSB transition though and got a SMI immediately after returning from pit_verify_msb() which didn't see the MSB transition. PIT MSB transition has happened somewhere during SMI execution. c. returned from SMI and we noted down the 'tsc', saw the pit MSB change now and exited the loop to calculate 'deltatsc'. Instead of noting the TSC at the MSB transition, we are way off because of the SMI. And as the SMI happened between the pit_verify_msb() and before the 'tsc' is recorded in the for loop, 'delattsc' (d1/d2 in quick_pit_calibrate()) will be small and quick_pit_calibrate() will not notice this error. Depending on whether SMI disturbance happens while computing d1 or d2, we will see the TSC calibrated value smaller or bigger than the expected value. As a result, in a cluster we were seeing a variation of approximately +/- 20MHz in the calibrated values, resulting in NTP failures. [ As far as the SMI source is concerned, this is a periodic SMI that gets disabled after ACPI is enabled by the OS. But the TSC calibration happens before the ACPI is enabled. ] To address this, change pit_expect_msb() so that - the 'tsc' is the TSC in between the two reads that read the MSB change from the PIT (same as before) - the 'delta' is the difference in TSC from *before* the MSB changed to *after* the MSB changed. Now the delta is twice as big as before (it covers four PIT accesses, roughly 4us) and quick_pit_calibrate() will loop a bit longer to get the calibrated value with in the 500ppm precision. As the delta (d1/d2) covers four PIT accesses, actual calibrated result might be closer to 250ppm precision. As the loop now takes longer to stabilize, double MAX_QUICK_PIT_MS to 50. SMI disturbance will showup as much larger delta's and the loop will take longer than usual for the result to be with in the accepted precision. Or will fallback to slow PIT calibration if it takes more than 50msec. Also while we are at this, remove the calibration correction that aims to get the result to the middle of the error bars. We really don't know which direction to correct into, so remove it. Reported-and-tested-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1326843337.5291.4.camel@sbsiddha-mobl2 Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Diffstat (limited to 'drivers/net/wireless/iwlegacy/iwl-4965-tx.c')
0 files changed, 0 insertions, 0 deletions