Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1480 commits)
  bonding: enable netpoll without checking link status
  xfrm: Refcount destination entry on xfrm_lookup
  net: introduce rx_handler results and logic around that
  bonding: get rid of IFF_SLAVE_INACTIVE netdev->priv_flag
  bonding: wrap slave state work
  net: get rid of multiple bond-related netdevice->priv_flags
  bonding: register slave pointer for rx_handler
  be2net: Bump up the version number
  be2net: Copyright notice change. Update to Emulex instead of ServerEngines
  e1000e: fix kconfig for crc32 dependency
  netfilter ebtables: fix xt_AUDIT to work with ebtables
  xen network backend driver
  bonding: Improve syslog message at device creation time
  bonding: Call netif_carrier_off after register_netdevice
  bonding: Incorrect TX queue offset
  net_sched: fix ip_tos2prio
  xfrm: fix __xfrm_route_forward()
  be2net: Fix UDP packet detected status in RX compl
  Phonet: fix aligned-mode pipe socket buffer header reserve
  netxen: support for GbE port settings
  ...

Fix up conflicts in drivers/staging/brcm80211/brcmsmac/wl_mac80211.c
with the staging updates.

1 files changed, 1426 insertions, 0 deletions

diff --git a/drivers/net/wireless/iwlegacy/iwl-dev.h b/drivers/net/wireless/iwlegacy/iwl-dev.h
new file mode 100644
index 000000000000..9ee849d669f3
--- /dev/null
+++ b/drivers/net/wireless/iwlegacy/iwl-dev.h
@@ -0,0 +1,1426 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+/*
+ * Please use this file (iwl-dev.h) for driver implementation definitions.
+ * Please use iwl-commands.h for uCode API definitions.
+ * Please use iwl-4965-hw.h for hardware-related definitions.
+ */
+
+#ifndef __iwl_legacy_dev_h__
+#define __iwl_legacy_dev_h__
+
+#include <linux/pci.h> /* for struct pci_device_id */
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/wait.h>
+#include <net/ieee80211_radiotap.h>
+
+#include "iwl-eeprom.h"
+#include "iwl-csr.h"
+#include "iwl-prph.h"
+#include "iwl-fh.h"
+#include "iwl-debug.h"
+#include "iwl-4965-hw.h"
+#include "iwl-3945-hw.h"
+#include "iwl-led.h"
+#include "iwl-power.h"
+#include "iwl-legacy-rs.h"
+
+struct iwl_tx_queue;
+
+/* CT-KILL constants */
+#define CT_KILL_THRESHOLD_LEGACY   110 /* in Celsius */
+
+/* Default noise level to report when noise measurement is not available.
+ *   This may be because we're:
+ *   1)  Not associated (4965, no beacon statistics being sent to driver)
+ *   2)  Scanning (noise measurement does not apply to associated channel)
+ *   3)  Receiving CCK (3945 delivers noise info only for OFDM frames)
+ * Use default noise value of -127 ... this is below the range of measurable
+ *   Rx dBm for either 3945 or 4965, so it can indicate "unmeasurable" to user.
+ *   Also, -127 works better than 0 when averaging frames with/without
+ *   noise info (e.g. averaging might be done in app); measured dBm values are
+ *   always negative ... using a negative value as the default keeps all
+ *   averages within an s8's (used in some apps) range of negative values. */
+#define IWL_NOISE_MEAS_NOT_AVAILABLE (-127)
+
+/*
+ * RTS threshold here is total size [2347] minus 4 FCS bytes
+ * Per spec:
+ *   a value of 0 means RTS on all data/management packets
+ *   a value > max MSDU size means no RTS
+ * else RTS for data/management frames where MPDU is larger
+ *   than RTS value.
+ */
+#define DEFAULT_RTS_THRESHOLD     2347U
+#define MIN_RTS_THRESHOLD         0U
+#define MAX_RTS_THRESHOLD         2347U
+#define MAX_MSDU_SIZE		  2304U
+#define MAX_MPDU_SIZE		  2346U
+#define DEFAULT_BEACON_INTERVAL   100U
+#define	DEFAULT_SHORT_RETRY_LIMIT 7U
+#define	DEFAULT_LONG_RETRY_LIMIT  4U
+
+struct iwl_rx_mem_buffer {
+	dma_addr_t page_dma;
+	struct page *page;
+	struct list_head list;
+};
+
+#define rxb_addr(r) page_address(r->page)
+
+/* defined below */
+struct iwl_device_cmd;
+
+struct iwl_cmd_meta {
+	/* only for SYNC commands, iff the reply skb is wanted */
+	struct iwl_host_cmd *source;
+	/*
+	 * only for ASYNC commands
+	 * (which is somewhat stupid -- look at iwl-sta.c for instance
+	 * which duplicates a bunch of code because the callback isn't
+	 * invoked for SYNC commands, if it were and its result passed
+	 * through it would be simpler...)
+	 */
+	void (*callback)(struct iwl_priv *priv,
+			 struct iwl_device_cmd *cmd,
+			 struct iwl_rx_packet *pkt);
+
+	/* The CMD_SIZE_HUGE flag bit indicates that the command
+	 * structure is stored at the end of the shared queue memory. */
+	u32 flags;
+
+	DEFINE_DMA_UNMAP_ADDR(mapping);
+	DEFINE_DMA_UNMAP_LEN(len);
+};
+
+/*
+ * Generic queue structure
+ *
+ * Contains common data for Rx and Tx queues
+ */
+struct iwl_queue {
+	int n_bd;              /* number of BDs in this queue */
+	int write_ptr;       /* 1-st empty entry (index) host_w*/
+	int read_ptr;         /* last used entry (index) host_r*/
+	/* use for monitoring and recovering the stuck queue */
+	dma_addr_t dma_addr;   /* physical addr for BD's */
+	int n_window;	       /* safe queue window */
+	u32 id;
+	int low_mark;	       /* low watermark, resume queue if free
+				* space more than this */
+	int high_mark;         /* high watermark, stop queue if free
+				* space less than this */
+} __packed;
+
+/* One for each TFD */
+struct iwl_tx_info {
+	struct sk_buff *skb;
+	struct iwl_rxon_context *ctx;
+};
+
+/**
+ * struct iwl_tx_queue - Tx Queue for DMA
+ * @q: generic Rx/Tx queue descriptor
+ * @bd: base of circular buffer of TFDs
+ * @cmd: array of command/TX buffer pointers
+ * @meta: array of meta data for each command/tx buffer
+ * @dma_addr_cmd: physical address of cmd/tx buffer array
+ * @txb: array of per-TFD driver data
+ * @time_stamp: time (in jiffies) of last read_ptr change
+ * @need_update: indicates need to update read/write index
+ * @sched_retry: indicates queue is high-throughput aggregation (HT AGG) enabled
+ *
+ * A Tx queue consists of circular buffer of BDs (a.k.a. TFDs, transmit frame
+ * descriptors) and required locking structures.
+ */
+#define TFD_TX_CMD_SLOTS 256
+#define TFD_CMD_SLOTS 32
+
+struct iwl_tx_queue {
+	struct iwl_queue q;
+	void *tfds;
+	struct iwl_device_cmd **cmd;
+	struct iwl_cmd_meta *meta;
+	struct iwl_tx_info *txb;
+	unsigned long time_stamp;
+	u8 need_update;
+	u8 sched_retry;
+	u8 active;
+	u8 swq_id;
+};
+
+#define IWL_NUM_SCAN_RATES         (2)
+
+struct iwl4965_channel_tgd_info {
+	u8 type;
+	s8 max_power;
+};
+
+struct iwl4965_channel_tgh_info {
+	s64 last_radar_time;
+};
+
+#define IWL4965_MAX_RATE (33)
+
+struct iwl3945_clip_group {
+	/* maximum power level to prevent clipping for each rate, derived by
+	 *   us from this band's saturation power in EEPROM */
+	const s8 clip_powers[IWL_MAX_RATES];
+};
+
+/* current Tx power values to use, one for each rate for each channel.
+ * requested power is limited by:
+ * -- regulatory EEPROM limits for this channel
+ * -- hardware capabilities (clip-powers)
+ * -- spectrum management
+ * -- user preference (e.g. iwconfig)
+ * when requested power is set, base power index must also be set. */
+struct iwl3945_channel_power_info {
+	struct iwl3945_tx_power tpc;	/* actual radio and DSP gain settings */
+	s8 power_table_index;	/* actual (compenst'd) index into gain table */
+	s8 base_power_index;	/* gain index for power at factory temp. */
+	s8 requested_power;	/* power (dBm) requested for this chnl/rate */
+};
+
+/* current scan Tx power values to use, one for each scan rate for each
+ * channel. */
+struct iwl3945_scan_power_info {
+	struct iwl3945_tx_power tpc;	/* actual radio and DSP gain settings */
+	s8 power_table_index;	/* actual (compenst'd) index into gain table */
+	s8 requested_power;	/* scan pwr (dBm) requested for chnl/rate */
+};
+
+/*
+ * One for each channel, holds all channel setup data
+ * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant
+ *     with one another!
+ */
+struct iwl_channel_info {
+	struct iwl4965_channel_tgd_info tgd;
+	struct iwl4965_channel_tgh_info tgh;
+	struct iwl_eeprom_channel eeprom;	/* EEPROM regulatory limit */
+	struct iwl_eeprom_channel ht40_eeprom;	/* EEPROM regulatory limit for
+						 * HT40 channel */
+
+	u8 channel;	  /* channel number */
+	u8 flags;	  /* flags copied from EEPROM */
+	s8 max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */
+	s8 curr_txpow;	  /* (dBm) regulatory/spectrum/user (not h/w) limit */
+	s8 min_power;	  /* always 0 */
+	s8 scan_power;	  /* (dBm) regul. eeprom, direct scans, any rate */
+
+	u8 group_index;	  /* 0-4, maps channel to group1/2/3/4/5 */
+	u8 band_index;	  /* 0-4, maps channel to band1/2/3/4/5 */
+	enum ieee80211_band band;
+
+	/* HT40 channel info */
+	s8 ht40_max_power_avg;	/* (dBm) regul. eeprom, normal Tx, any rate */
+	u8 ht40_flags;		/* flags copied from EEPROM */
+	u8 ht40_extension_channel; /* HT_IE_EXT_CHANNEL_* */
+
+	/* Radio/DSP gain settings for each "normal" data Tx rate.
+	 * These include, in addition to RF and DSP gain, a few fields for
+	 *   remembering/modifying gain settings (indexes). */
+	struct iwl3945_channel_power_info power_info[IWL4965_MAX_RATE];
+
+	/* Radio/DSP gain settings for each scan rate, for directed scans. */
+	struct iwl3945_scan_power_info scan_pwr_info[IWL_NUM_SCAN_RATES];
+};
+
+#define IWL_TX_FIFO_BK		0	/* shared */
+#define IWL_TX_FIFO_BE		1
+#define IWL_TX_FIFO_VI		2	/* shared */
+#define IWL_TX_FIFO_VO		3
+#define IWL_TX_FIFO_UNUSED	-1
+
+/* Minimum number of queues. MAX_NUM is defined in hw specific files.
+ * Set the minimum to accommodate the 4 standard TX queues, 1 command
+ * queue, 2 (unused) HCCA queues, and 4 HT queues (one for each AC) */
+#define IWL_MIN_NUM_QUEUES	10
+
+#define IWL_DEFAULT_CMD_QUEUE_NUM	4
+
+#define IEEE80211_DATA_LEN              2304
+#define IEEE80211_4ADDR_LEN             30
+#define IEEE80211_HLEN                  (IEEE80211_4ADDR_LEN)
+#define IEEE80211_FRAME_LEN             (IEEE80211_DATA_LEN + IEEE80211_HLEN)
+
+struct iwl_frame {
+	union {
+		struct ieee80211_hdr frame;
+		struct iwl_tx_beacon_cmd beacon;
+		u8 raw[IEEE80211_FRAME_LEN];
+		u8 cmd[360];
+	} u;
+	struct list_head list;
+};
+
+#define SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4)
+#define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ)
+#define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4)
+
+enum {
+	CMD_SYNC = 0,
+	CMD_SIZE_NORMAL = 0,
+	CMD_NO_SKB = 0,
+	CMD_SIZE_HUGE = (1 << 0),
+	CMD_ASYNC = (1 << 1),
+	CMD_WANT_SKB = (1 << 2),
+};
+
+#define DEF_CMD_PAYLOAD_SIZE 320
+
+/**
+ * struct iwl_device_cmd
+ *
+ * For allocation of the command and tx queues, this establishes the overall
+ * size of the largest command we send to uCode, except for a scan command
+ * (which is relatively huge; space is allocated separately).
+ */
+struct iwl_device_cmd {
+	struct iwl_cmd_header hdr;	/* uCode API */
+	union {
+		u32 flags;
+		u8 val8;
+		u16 val16;
+		u32 val32;
+		struct iwl_tx_cmd tx;
+		u8 payload[DEF_CMD_PAYLOAD_SIZE];
+	} __packed cmd;
+} __packed;
+
+#define TFD_MAX_PAYLOAD_SIZE (sizeof(struct iwl_device_cmd))
+
+
+struct iwl_host_cmd {
+	const void *data;
+	unsigned long reply_page;
+	void (*callback)(struct iwl_priv *priv,
+			 struct iwl_device_cmd *cmd,
+			 struct iwl_rx_packet *pkt);
+	u32 flags;
+	u16 len;
+	u8 id;
+};
+
+#define SUP_RATE_11A_MAX_NUM_CHANNELS  8
+#define SUP_RATE_11B_MAX_NUM_CHANNELS  4
+#define SUP_RATE_11G_MAX_NUM_CHANNELS  12
+
+/**
+ * struct iwl_rx_queue - Rx queue
+ * @bd: driver's pointer to buffer of receive buffer descriptors (rbd)
+ * @bd_dma: bus address of buffer of receive buffer descriptors (rbd)
+ * @read: Shared index to newest available Rx buffer
+ * @write: Shared index to oldest written Rx packet
+ * @free_count: Number of pre-allocated buffers in rx_free
+ * @rx_free: list of free SKBs for use
+ * @rx_used: List of Rx buffers with no SKB
+ * @need_update: flag to indicate we need to update read/write index
+ * @rb_stts: driver's pointer to receive buffer status
+ * @rb_stts_dma: bus address of receive buffer status
+ *
+ * NOTE:  rx_free and rx_used are used as a FIFO for iwl_rx_mem_buffers
+ */
+struct iwl_rx_queue {
+	__le32 *bd;
+	dma_addr_t bd_dma;
+	struct iwl_rx_mem_buffer pool[RX_QUEUE_SIZE + RX_FREE_BUFFERS];
+	struct iwl_rx_mem_buffer *queue[RX_QUEUE_SIZE];
+	u32 read;
+	u32 write;
+	u32 free_count;
+	u32 write_actual;
+	struct list_head rx_free;
+	struct list_head rx_used;
+	int need_update;
+	struct iwl_rb_status *rb_stts;
+	dma_addr_t rb_stts_dma;
+	spinlock_t lock;
+};
+
+#define IWL_SUPPORTED_RATES_IE_LEN         8
+
+#define MAX_TID_COUNT        9
+
+#define IWL_INVALID_RATE     0xFF
+#define IWL_INVALID_VALUE    -1
+
+/**
+ * struct iwl_ht_agg -- aggregation status while waiting for block-ack
+ * @txq_id: Tx queue used for Tx attempt
+ * @frame_count: # frames attempted by Tx command
+ * @wait_for_ba: Expect block-ack before next Tx reply
+ * @start_idx: Index of 1st Transmit Frame Descriptor (TFD) in Tx window
+ * @bitmap0: Low order bitmap, one bit for each frame pending ACK in Tx window
+ * @bitmap1: High order, one bit for each frame pending ACK in Tx window
+ * @rate_n_flags: Rate at which Tx was attempted
+ *
+ * If REPLY_TX indicates that aggregation was attempted, driver must wait
+ * for block ack (REPLY_COMPRESSED_BA).  This struct stores tx reply info
+ * until block ack arrives.
+ */
+struct iwl_ht_agg {
+	u16 txq_id;
+	u16 frame_count;
+	u16 wait_for_ba;
+	u16 start_idx;
+	u64 bitmap;
+	u32 rate_n_flags;
+#define IWL_AGG_OFF 0
+#define IWL_AGG_ON 1
+#define IWL_EMPTYING_HW_QUEUE_ADDBA 2
+#define IWL_EMPTYING_HW_QUEUE_DELBA 3
+	u8 state;
+};
+
+
+struct iwl_tid_data {
+	u16 seq_number; /* 4965 only */
+	u16 tfds_in_queue;
+	struct iwl_ht_agg agg;
+};
+
+struct iwl_hw_key {
+	u32 cipher;
+	int keylen;
+	u8 keyidx;
+	u8 key[32];
+};
+
+union iwl_ht_rate_supp {
+	u16 rates;
+	struct {
+		u8 siso_rate;
+		u8 mimo_rate;
+	};
+};
+
+#define CFG_HT_RX_AMPDU_FACTOR_8K   (0x0)
+#define CFG_HT_RX_AMPDU_FACTOR_16K  (0x1)
+#define CFG_HT_RX_AMPDU_FACTOR_32K  (0x2)
+#define CFG_HT_RX_AMPDU_FACTOR_64K  (0x3)
+#define CFG_HT_RX_AMPDU_FACTOR_DEF  CFG_HT_RX_AMPDU_FACTOR_64K
+#define CFG_HT_RX_AMPDU_FACTOR_MAX  CFG_HT_RX_AMPDU_FACTOR_64K
+#define CFG_HT_RX_AMPDU_FACTOR_MIN  CFG_HT_RX_AMPDU_FACTOR_8K
+
+/*
+ * Maximal MPDU density for TX aggregation
+ * 4 - 2us density
+ * 5 - 4us density
+ * 6 - 8us density
+ * 7 - 16us density
+ */
+#define CFG_HT_MPDU_DENSITY_2USEC   (0x4)
+#define CFG_HT_MPDU_DENSITY_4USEC   (0x5)
+#define CFG_HT_MPDU_DENSITY_8USEC   (0x6)
+#define CFG_HT_MPDU_DENSITY_16USEC  (0x7)
+#define CFG_HT_MPDU_DENSITY_DEF CFG_HT_MPDU_DENSITY_4USEC
+#define CFG_HT_MPDU_DENSITY_MAX CFG_HT_MPDU_DENSITY_16USEC
+#define CFG_HT_MPDU_DENSITY_MIN     (0x1)
+
+struct iwl_ht_config {
+	bool single_chain_sufficient;
+	enum ieee80211_smps_mode smps; /* current smps mode */
+};
+
+/* QoS structures */
+struct iwl_qos_info {
+	int qos_active;
+	struct iwl_qosparam_cmd def_qos_parm;
+};
+
+/*
+ * Structure should be accessed with sta_lock held. When station addition
+ * is in progress (IWL_STA_UCODE_INPROGRESS) it is possible to access only
+ * the commands (iwl_legacy_addsta_cmd and iwl_link_quality_cmd) without
+ * sta_lock held.
+ */
+struct iwl_station_entry {
+	struct iwl_legacy_addsta_cmd sta;
+	struct iwl_tid_data tid[MAX_TID_COUNT];
+	u8 used, ctxid;
+	struct iwl_hw_key keyinfo;
+	struct iwl_link_quality_cmd *lq;
+};
+
+struct iwl_station_priv_common {
+	struct iwl_rxon_context *ctx;
+	u8 sta_id;
+};
+
+/*
+ * iwl_station_priv: Driver's private station information
+ *
+ * When mac80211 creates a station it reserves some space (hw->sta_data_size)
+ * in the structure for use by driver. This structure is places in that
+ * space.
+ *
+ * The common struct MUST be first because it is shared between
+ * 3945 and 4965!
+ */
+struct iwl_station_priv {
+	struct iwl_station_priv_common common;
+	struct iwl_lq_sta lq_sta;
+	atomic_t pending_frames;
+	bool client;
+	bool asleep;
+};
+
+/**
+ * struct iwl_vif_priv - driver's private per-interface information
+ *
+ * When mac80211 allocates a virtual interface, it can allocate
+ * space for us to put data into.
+ */
+struct iwl_vif_priv {
+	struct iwl_rxon_context *ctx;
+	u8 ibss_bssid_sta_id;
+};
+
+/* one for each uCode image (inst/data, boot/init/runtime) */
+struct fw_desc {
+	void *v_addr;		/* access by driver */
+	dma_addr_t p_addr;	/* access by card's busmaster DMA */
+	u32 len;		/* bytes */
+};
+
+/* uCode file layout */
+struct iwl_ucode_header {
+	__le32 ver;	/* major/minor/API/serial */
+	struct {
+		__le32 inst_size;	/* bytes of runtime code */
+		__le32 data_size;	/* bytes of runtime data */
+		__le32 init_size;	/* bytes of init code */
+		__le32 init_data_size;	/* bytes of init data */
+		__le32 boot_size;	/* bytes of bootstrap code */
+		u8 data[0];		/* in same order as sizes */
+	} v1;
+};
+
+struct iwl4965_ibss_seq {
+	u8 mac[ETH_ALEN];
+	u16 seq_num;
+	u16 frag_num;
+	unsigned long packet_time;
+	struct list_head list;
+};
+
+struct iwl_sensitivity_ranges {
+	u16 min_nrg_cck;
+	u16 max_nrg_cck;
+
+	u16 nrg_th_cck;
+	u16 nrg_th_ofdm;
+
+	u16 auto_corr_min_ofdm;
+	u16 auto_corr_min_ofdm_mrc;
+	u16 auto_corr_min_ofdm_x1;
+	u16 auto_corr_min_ofdm_mrc_x1;
+
+	u16 auto_corr_max_ofdm;
+	u16 auto_corr_max_ofdm_mrc;
+	u16 auto_corr_max_ofdm_x1;
+	u16 auto_corr_max_ofdm_mrc_x1;
+
+	u16 auto_corr_max_cck;
+	u16 auto_corr_max_cck_mrc;
+	u16 auto_corr_min_cck;
+	u16 auto_corr_min_cck_mrc;
+
+	u16 barker_corr_th_min;
+	u16 barker_corr_th_min_mrc;
+	u16 nrg_th_cca;
+};
+
+
+#define KELVIN_TO_CELSIUS(x) ((x)-273)
+#define CELSIUS_TO_KELVIN(x) ((x)+273)
+
+
+/**
+ * struct iwl_hw_params
+ * @max_txq_num: Max # Tx queues supported
+ * @dma_chnl_num: Number of Tx DMA/FIFO channels
+ * @scd_bc_tbls_size: size of scheduler byte count tables
+ * @tfd_size: TFD size
+ * @tx/rx_chains_num: Number of TX/RX chains
+ * @valid_tx/rx_ant: usable antennas
+ * @max_rxq_size: Max # Rx frames in Rx queue (must be power-of-2)
+ * @max_rxq_log: Log-base-2 of max_rxq_size
+ * @rx_page_order: Rx buffer page order
+ * @rx_wrt_ptr_reg: FH{39}_RSCSR_CHNL0_WPTR
+ * @max_stations:
+ * @ht40_channel: is 40MHz width possible in band 2.4
+ * BIT(IEEE80211_BAND_5GHZ) BIT(IEEE80211_BAND_5GHZ)
+ * @sw_crypto: 0 for hw, 1 for sw
+ * @max_xxx_size: for ucode uses
+ * @ct_kill_threshold: temperature threshold
+ * @beacon_time_tsf_bits: number of valid tsf bits for beacon time
+ * @struct iwl_sensitivity_ranges: range of sensitivity values
+ */
+struct iwl_hw_params {
+	u8 max_txq_num;
+	u8 dma_chnl_num;
+	u16 scd_bc_tbls_size;
+	u32 tfd_size;
+	u8  tx_chains_num;
+	u8  rx_chains_num;
+	u8  valid_tx_ant;
+	u8  valid_rx_ant;
+	u16 max_rxq_size;
+	u16 max_rxq_log;
+	u32 rx_page_order;
+	u32 rx_wrt_ptr_reg;
+	u8  max_stations;
+	u8  ht40_channel;
+	u8  max_beacon_itrvl;	/* in 1024 ms */
+	u32 max_inst_size;
+	u32 max_data_size;
+	u32 max_bsm_size;
+	u32 ct_kill_threshold; /* value in hw-dependent units */
+	u16 beacon_time_tsf_bits;
+	const struct iwl_sensitivity_ranges *sens;
+};
+
+
+/******************************************************************************
+ *
+ * Functions implemented in core module which are forward declared here
+ * for use by iwl-[4-5].c
+ *
+ * NOTE:  The implementation of these functions are not hardware specific
+ * which is why they are in the core module files.
+ *
+ * Naming convention --
+ * iwl_         <-- Is part of iwlwifi
+ * iwlXXXX_     <-- Hardware specific (implemented in iwl-XXXX.c for XXXX)
+ * iwl4965_bg_      <-- Called from work queue context
+ * iwl4965_mac_     <-- mac80211 callback
+ *
+ ****************************************************************************/
+extern void iwl4965_update_chain_flags(struct iwl_priv *priv);
+extern const u8 iwlegacy_bcast_addr[ETH_ALEN];
+extern int iwl_legacy_queue_space(const struct iwl_queue *q);
+static inline int iwl_legacy_queue_used(const struct iwl_queue *q, int i)
+{
+	return q->write_ptr >= q->read_ptr ?
+		(i >= q->read_ptr && i < q->write_ptr) :
+		!(i < q->read_ptr && i >= q->write_ptr);
+}
+
+
+static inline u8 iwl_legacy_get_cmd_index(struct iwl_queue *q, u32 index,
+								int is_huge)
+{
+	/*
+	 * This is for init calibration result and scan command which
+	 * required buffer > TFD_MAX_PAYLOAD_SIZE,
+	 * the big buffer at end of command array
+	 */
+	if (is_huge)
+		return q->n_window;	/* must be power of 2 */
+
+	/* Otherwise, use normal size buffers */
+	return index & (q->n_window - 1);
+}
+
+
+struct iwl_dma_ptr {
+	dma_addr_t dma;
+	void *addr;
+	size_t size;
+};
+
+#define IWL_OPERATION_MODE_AUTO     0
+#define IWL_OPERATION_MODE_HT_ONLY  1
+#define IWL_OPERATION_MODE_MIXED    2
+#define IWL_OPERATION_MODE_20MHZ    3
+
+#define IWL_TX_CRC_SIZE 4
+#define IWL_TX_DELIMITER_SIZE 4
+
+#define TX_POWER_IWL_ILLEGAL_VOLTAGE -10000
+
+/* Sensitivity and chain noise calibration */
+#define INITIALIZATION_VALUE		0xFFFF
+#define IWL4965_CAL_NUM_BEACONS		20
+#define IWL_CAL_NUM_BEACONS		16
+#define MAXIMUM_ALLOWED_PATHLOSS	15
+
+#define CHAIN_NOISE_MAX_DELTA_GAIN_CODE 3
+
+#define MAX_FA_OFDM  50
+#define MIN_FA_OFDM  5
+#define MAX_FA_CCK   50
+#define MIN_FA_CCK   5
+
+#define AUTO_CORR_STEP_OFDM       1
+
+#define AUTO_CORR_STEP_CCK     3
+#define AUTO_CORR_MAX_TH_CCK   160
+
+#define NRG_DIFF               2
+#define NRG_STEP_CCK           2
+#define NRG_MARGIN             8
+#define MAX_NUMBER_CCK_NO_FA 100
+
+#define AUTO_CORR_CCK_MIN_VAL_DEF    (125)
+
+#define CHAIN_A             0
+#define CHAIN_B             1
+#define CHAIN_C             2
+#define CHAIN_NOISE_DELTA_GAIN_INIT_VAL 4
+#define ALL_BAND_FILTER			0xFF00
+#define IN_BAND_FILTER			0xFF
+#define MIN_AVERAGE_NOISE_MAX_VALUE	0xFFFFFFFF
+
+#define NRG_NUM_PREV_STAT_L     20
+#define NUM_RX_CHAINS           3
+
+enum iwl4965_false_alarm_state {
+	IWL_FA_TOO_MANY = 0,
+	IWL_FA_TOO_FEW = 1,
+	IWL_FA_GOOD_RANGE = 2,
+};
+
+enum iwl4965_chain_noise_state {
+	IWL_CHAIN_NOISE_ALIVE = 0,  /* must be 0 */
+	IWL_CHAIN_NOISE_ACCUMULATE,
+	IWL_CHAIN_NOISE_CALIBRATED,
+	IWL_CHAIN_NOISE_DONE,
+};
+
+enum iwl4965_calib_enabled_state {
+	IWL_CALIB_DISABLED = 0,  /* must be 0 */
+	IWL_CALIB_ENABLED = 1,
+};
+
+/*
+ * enum iwl_calib
+ * defines the order in which results of initial calibrations
+ * should be sent to the runtime uCode
+ */
+enum iwl_calib {
+	IWL_CALIB_MAX,
+};
+
+/* Opaque calibration results */
+struct iwl_calib_result {
+	void *buf;
+	size_t buf_len;
+};
+
+enum ucode_type {
+	UCODE_NONE = 0,
+	UCODE_INIT,
+	UCODE_RT
+};
+
+/* Sensitivity calib data */
+struct iwl_sensitivity_data {
+	u32 auto_corr_ofdm;
+	u32 auto_corr_ofdm_mrc;
+	u32 auto_corr_ofdm_x1;
+	u32 auto_corr_ofdm_mrc_x1;
+	u32 auto_corr_cck;
+	u32 auto_corr_cck_mrc;
+
+	u32 last_bad_plcp_cnt_ofdm;
+	u32 last_fa_cnt_ofdm;
+	u32 last_bad_plcp_cnt_cck;
+	u32 last_fa_cnt_cck;
+
+	u32 nrg_curr_state;
+	u32 nrg_prev_state;
+	u32 nrg_value[10];
+	u8  nrg_silence_rssi[NRG_NUM_PREV_STAT_L];
+	u32 nrg_silence_ref;
+	u32 nrg_energy_idx;
+	u32 nrg_silence_idx;
+	u32 nrg_th_cck;
+	s32 nrg_auto_corr_silence_diff;
+	u32 num_in_cck_no_fa;
+	u32 nrg_th_ofdm;
+
+	u16 barker_corr_th_min;
+	u16 barker_corr_th_min_mrc;
+	u16 nrg_th_cca;
+};
+
+/* Chain noise (differential Rx gain) calib data */
+struct iwl_chain_noise_data {
+	u32 active_chains;
+	u32 chain_noise_a;
+	u32 chain_noise_b;
+	u32 chain_noise_c;
+	u32 chain_signal_a;
+	u32 chain_signal_b;
+	u32 chain_signal_c;
+	u16 beacon_count;
+	u8 disconn_array[NUM_RX_CHAINS];
+	u8 delta_gain_code[NUM_RX_CHAINS];
+	u8 radio_write;
+	u8 state;
+};
+
+#define	EEPROM_SEM_TIMEOUT 10		/* milliseconds */
+#define EEPROM_SEM_RETRY_LIMIT 1000	/* number of attempts (not time) */
+
+#define IWL_TRAFFIC_ENTRIES	(256)
+#define IWL_TRAFFIC_ENTRY_SIZE  (64)
+
+enum {
+	MEASUREMENT_READY = (1 << 0),
+	MEASUREMENT_ACTIVE = (1 << 1),
+};
+
+/* interrupt statistics */
+struct isr_statistics {
+	u32 hw;
+	u32 sw;
+	u32 err_code;
+	u32 sch;
+	u32 alive;
+	u32 rfkill;
+	u32 ctkill;
+	u32 wakeup;
+	u32 rx;
+	u32 rx_handlers[REPLY_MAX];
+	u32 tx;
+	u32 unhandled;
+};
+
+/* management statistics */
+enum iwl_mgmt_stats {
+	MANAGEMENT_ASSOC_REQ = 0,
+	MANAGEMENT_ASSOC_RESP,
+	MANAGEMENT_REASSOC_REQ,
+	MANAGEMENT_REASSOC_RESP,
+	MANAGEMENT_PROBE_REQ,
+	MANAGEMENT_PROBE_RESP,
+	MANAGEMENT_BEACON,
+	MANAGEMENT_ATIM,
+	MANAGEMENT_DISASSOC,
+	MANAGEMENT_AUTH,
+	MANAGEMENT_DEAUTH,
+	MANAGEMENT_ACTION,
+	MANAGEMENT_MAX,
+};
+/* control statistics */
+enum iwl_ctrl_stats {
+	CONTROL_BACK_REQ =  0,
+	CONTROL_BACK,
+	CONTROL_PSPOLL,
+	CONTROL_RTS,
+	CONTROL_CTS,
+	CONTROL_ACK,
+	CONTROL_CFEND,
+	CONTROL_CFENDACK,
+	CONTROL_MAX,
+};
+
+struct traffic_stats {
+#ifdef CONFIG_IWLWIFI_LEGACY_DEBUGFS
+	u32 mgmt[MANAGEMENT_MAX];
+	u32 ctrl[CONTROL_MAX];
+	u32 data_cnt;
+	u64 data_bytes;
+#endif
+};
+
+/*
+ * iwl_switch_rxon: "channel switch" structure
+ *
+ * @ switch_in_progress: channel switch in progress
+ * @ channel: new channel
+ */
+struct iwl_switch_rxon {
+	bool switch_in_progress;
+	__le16 channel;
+};
+
+/*
+ * schedule the timer to wake up every UCODE_TRACE_PERIOD milliseconds
+ * to perform continuous uCode event logging operation if enabled
+ */
+#define UCODE_TRACE_PERIOD (100)
+
+/*
+ * iwl_event_log: current uCode event log position
+ *
+ * @ucode_trace: enable/disable ucode continuous trace timer
+ * @num_wraps: how many times the event buffer wraps
+ * @next_entry:  the entry just before the next one that uCode would fill
+ * @non_wraps_count: counter for no wrap detected when dump ucode events
+ * @wraps_once_count: counter for wrap once detected when dump ucode events
+ * @wraps_more_count: counter for wrap more than once detected
+ *		      when dump ucode events
+ */
+struct iwl_event_log {
+	bool ucode_trace;
+	u32 num_wraps;
+	u32 next_entry;
+	int non_wraps_count;
+	int wraps_once_count;
+	int wraps_more_count;
+};
+
+/*
+ * host interrupt timeout value
+ * used with setting interrupt coalescing timer
+ * the CSR_INT_COALESCING is an 8 bit register in 32-usec unit
+ *
+ * default interrupt coalescing timer is 64 x 32 = 2048 usecs
+ * default interrupt coalescing calibration timer is 16 x 32 = 512 usecs
+ */
+#define IWL_HOST_INT_TIMEOUT_MAX	(0xFF)
+#define IWL_HOST_INT_TIMEOUT_DEF	(0x40)
+#define IWL_HOST_INT_TIMEOUT_MIN	(0x0)
+#define IWL_HOST_INT_CALIB_TIMEOUT_MAX	(0xFF)
+#define IWL_HOST_INT_CALIB_TIMEOUT_DEF	(0x10)
+#define IWL_HOST_INT_CALIB_TIMEOUT_MIN	(0x0)
+
+/*
+ * This is the threshold value of plcp error rate per 100mSecs.  It is
+ * used to set and check for the validity of plcp_delta.
+ */
+#define IWL_MAX_PLCP_ERR_THRESHOLD_MIN	(1)
+#define IWL_MAX_PLCP_ERR_THRESHOLD_DEF	(50)
+#define IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF	(100)
+#define IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF	(200)
+#define IWL_MAX_PLCP_ERR_THRESHOLD_MAX	(255)
+#define IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE	(0)
+
+#define IWL_DELAY_NEXT_FORCE_RF_RESET  (HZ*3)
+#define IWL_DELAY_NEXT_FORCE_FW_RELOAD (HZ*5)
+
+/* TX queue watchdog timeouts in mSecs */
+#define IWL_DEF_WD_TIMEOUT	(2000)
+#define IWL_LONG_WD_TIMEOUT	(10000)
+#define IWL_MAX_WD_TIMEOUT	(120000)
+
+enum iwl_reset {
+	IWL_RF_RESET = 0,
+	IWL_FW_RESET,
+	IWL_MAX_FORCE_RESET,
+};
+
+struct iwl_force_reset {
+	int reset_request_count;
+	int reset_success_count;
+	int reset_reject_count;
+	unsigned long reset_duration;
+	unsigned long last_force_reset_jiffies;
+};
+
+/* extend beacon time format bit shifting  */
+/*
+ * for _3945 devices
+ * bits 31:24 - extended
+ * bits 23:0  - interval
+ */
+#define IWL3945_EXT_BEACON_TIME_POS	24
+/*
+ * for _4965 devices
+ * bits 31:22 - extended
+ * bits 21:0  - interval
+ */
+#define IWL4965_EXT_BEACON_TIME_POS	22
+
+enum iwl_rxon_context_id {
+	IWL_RXON_CTX_BSS,
+
+	NUM_IWL_RXON_CTX
+};
+
+struct iwl_rxon_context {
+	struct ieee80211_vif *vif;
+
+	const u8 *ac_to_fifo;
+	const u8 *ac_to_queue;
+	u8 mcast_queue;
+
+	/*
+	 * We could use the vif to indicate active, but we
+	 * also need it to be active during disabling when
+	 * we already removed the vif for type setting.
+	 */
+	bool always_active, is_active;
+
+	bool ht_need_multiple_chains;
+
+	enum iwl_rxon_context_id ctxid;
+
+	u32 interface_modes, exclusive_interface_modes;
+	u8 unused_devtype, ap_devtype, ibss_devtype, station_devtype;
+
+	/*
+	 * We declare this const so it can only be
+	 * changed via explicit cast within the
+	 * routines that actually update the physical
+	 * hardware.
+	 */
+	const struct iwl_legacy_rxon_cmd active;
+	struct iwl_legacy_rxon_cmd staging;
+
+	struct iwl_rxon_time_cmd timing;
+
+	struct iwl_qos_info qos_data;
+
+	u8 bcast_sta_id, ap_sta_id;
+
+	u8 rxon_cmd, rxon_assoc_cmd, rxon_timing_cmd;
+	u8 qos_cmd;
+	u8 wep_key_cmd;
+
+	struct iwl_wep_key wep_keys[WEP_KEYS_MAX];
+	u8 key_mapping_keys;
+
+	__le32 station_flags;
+
+	struct {
+		bool non_gf_sta_present;
+		u8 protection;
+		bool enabled, is_40mhz;
+		u8 extension_chan_offset;
+	} ht;
+};
+
+struct iwl_priv {
+
+	/* ieee device used by generic ieee processing code */
+	struct ieee80211_hw *hw;
+	struct ieee80211_channel *ieee_channels;
+	struct ieee80211_rate *ieee_rates;
+	struct iwl_cfg *cfg;
+
+	/* temporary frame storage list */
+	struct list_head free_frames;
+	int frames_count;
+
+	enum ieee80211_band band;
+	int alloc_rxb_page;
+
+	void (*rx_handlers[REPLY_MAX])(struct iwl_priv *priv,
+				       struct iwl_rx_mem_buffer *rxb);
+
+	struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
+
+	/* spectrum measurement report caching */
+	struct iwl_spectrum_notification measure_report;
+	u8 measurement_status;
+
+	/* ucode beacon time */
+	u32 ucode_beacon_time;
+	int missed_beacon_threshold;
+
+	/* track IBSS manager (last beacon) status */
+	u32 ibss_manager;
+
+	/* storing the jiffies when the plcp error rate is received */
+	unsigned long plcp_jiffies;
+
+	/* force reset */
+	struct iwl_force_reset force_reset[IWL_MAX_FORCE_RESET];
+
+	/* we allocate array of iwl_channel_info for NIC's valid channels.
+	 *    Access via channel # using indirect index array */
+	struct iwl_channel_info *channel_info;	/* channel info array */
+	u8 channel_count;	/* # of channels */
+
+	/* thermal calibration */
+	s32 temperature;	/* degrees Kelvin */
+	s32 last_temperature;
+
+	/* init calibration results */
+	struct iwl_calib_result calib_results[IWL_CALIB_MAX];
+
+	/* Scan related variables */
+	unsigned long scan_start;
+	unsigned long scan_start_tsf;
+	void *scan_cmd;
+	enum ieee80211_band scan_band;
+	struct cfg80211_scan_request *scan_request;
+	struct ieee80211_vif *scan_vif;
+	bool is_internal_short_scan;
+	u8 scan_tx_ant[IEEE80211_NUM_BANDS];
+	u8 mgmt_tx_ant;
+
+	/* spinlock */
+	spinlock_t lock;	/* protect general shared data */
+	spinlock_t hcmd_lock;	/* protect hcmd */
+	spinlock_t reg_lock;	/* protect hw register access */
+	struct mutex mutex;
+	struct mutex sync_cmd_mutex; /* enable serialization of sync commands */
+
+	/* basic pci-network driver stuff */
+	struct pci_dev *pci_dev;
+
+	/* pci hardware address support */
+	void __iomem *hw_base;
+	u32  hw_rev;
+	u32  hw_wa_rev;
+	u8   rev_id;
+
+	/* microcode/device supports multiple contexts */
+	u8 valid_contexts;
+
+	/* command queue number */
+	u8 cmd_queue;
+
+	/* max number of station keys */
+	u8 sta_key_max_num;
+
+	/* EEPROM MAC addresses */
+	struct mac_address addresses[1];
+
+	/* uCode images, save to reload in case of failure */
+	int fw_index;			/* firmware we're trying to load */
+	u32 ucode_ver;			/* version of ucode, copy of
+					   iwl_ucode.ver */
+	struct fw_desc ucode_code;	/* runtime inst */
+	struct fw_desc ucode_data;	/* runtime data original */
+	struct fw_desc ucode_data_backup;	/* runtime data save/restore */
+	struct fw_desc ucode_init;	/* initialization inst */
+	struct fw_desc ucode_init_data;	/* initialization data */
+	struct fw_desc ucode_boot;	/* bootstrap inst */
+	enum ucode_type ucode_type;
+	u8 ucode_write_complete;	/* the image write is complete */
+	char firmware_name[25];
+
+	struct iwl_rxon_context contexts[NUM_IWL_RXON_CTX];
+
+	struct iwl_switch_rxon switch_rxon;
+
+	/* 1st responses from initialize and runtime uCode images.
+	 * _4965's initialize alive response contains some calibration data. */
+	struct iwl_init_alive_resp card_alive_init;
+	struct iwl_alive_resp card_alive;
+
+	u16 active_rate;
+
+	u8 start_calib;
+	struct iwl_sensitivity_data sensitivity_data;
+	struct iwl_chain_noise_data chain_noise_data;
+	__le16 sensitivity_tbl[HD_TABLE_SIZE];
+
+	struct iwl_ht_config current_ht_config;
+
+	/* Rate scaling data */
+	u8 retry_rate;
+
+	wait_queue_head_t wait_command_queue;
+
+	int activity_timer_active;
+
+	/* Rx and Tx DMA processing queues */
+	struct iwl_rx_queue rxq;
+	struct iwl_tx_queue *txq;
+	unsigned long txq_ctx_active_msk;
+	struct iwl_dma_ptr  kw;	/* keep warm address */
+	struct iwl_dma_ptr  scd_bc_tbls;
+
+	u32 scd_base_addr;	/* scheduler sram base address */
+
+	unsigned long status;
+
+	/* counts mgmt, ctl, and data packets */
+	struct traffic_stats tx_stats;
+	struct traffic_stats rx_stats;
+
+	/* counts interrupts */
+	struct isr_statistics isr_stats;
+
+	struct iwl_power_mgr power_data;
+
+	/* context information */
+	u8 bssid[ETH_ALEN]; /* used only on 3945 but filled by core */
+
+	/* station table variables */
+
+	/* Note: if lock and sta_lock are needed, lock must be acquired first */
+	spinlock_t sta_lock;
+	int num_stations;
+	struct iwl_station_entry stations[IWL_STATION_COUNT];
+	unsigned long ucode_key_table;
+
+	/* queue refcounts */
+#define IWL_MAX_HW_QUEUES	32
+	unsigned long queue_stopped[BITS_TO_LONGS(IWL_MAX_HW_QUEUES)];
+	/* for each AC */
+	atomic_t queue_stop_count[4];
+
+	/* Indication if ieee80211_ops->open has been called */
+	u8 is_open;
+
+	u8 mac80211_registered;
+
+	/* eeprom -- this is in the card's little endian byte order */
+	u8 *eeprom;
+	struct iwl_eeprom_calib_info *calib_info;
+
+	enum nl80211_iftype iw_mode;
+
+	/* Last Rx'd beacon timestamp */
+	u64 timestamp;
+
+	union {
+#if defined(CONFIG_IWL3945) || defined(CONFIG_IWL3945_MODULE)
+		struct {
+			void *shared_virt;
+			dma_addr_t shared_phys;
+
+			struct delayed_work thermal_periodic;
+			struct delayed_work rfkill_poll;
+
+			struct iwl3945_notif_statistics statistics;
+#ifdef CONFIG_IWLWIFI_LEGACY_DEBUGFS
+			struct iwl3945_notif_statistics accum_statistics;
+			struct iwl3945_notif_statistics delta_statistics;
+			struct iwl3945_notif_statistics max_delta;
+#endif
+
+			u32 sta_supp_rates;
+			int last_rx_rssi;	/* From Rx packet statistics */
+
+			/* Rx'd packet timing information */
+			u32 last_beacon_time;
+			u64 last_tsf;
+
+			/*
+			 * each calibration channel group in the
+			 * EEPROM has a derived clip setting for
+			 * each rate.
+			 */
+			const struct iwl3945_clip_group clip_groups[5];
+
+		} _3945;
+#endif
+#if defined(CONFIG_IWL4965) || defined(CONFIG_IWL4965_MODULE)
+		struct {
+			/*
+			 * reporting the number of tids has AGG on. 0 means
+			 * no AGGREGATION
+			 */
+			u8 agg_tids_count;
+
+			struct iwl_rx_phy_res last_phy_res;
+			bool last_phy_res_valid;
+
+			struct completion firmware_loading_complete;
+
+			/*
+			 * chain noise reset and gain commands are the
+			 * two extra calibration commands follows the standard
+			 * phy calibration commands
+			 */
+			u8 phy_calib_chain_noise_reset_cmd;
+			u8 phy_calib_chain_noise_gain_cmd;
+
+			struct iwl_notif_statistics statistics;
+#ifdef CONFIG_IWLWIFI_LEGACY_DEBUGFS
+			struct iwl_notif_statistics accum_statistics;
+			struct iwl_notif_statistics delta_statistics;
+			struct iwl_notif_statistics max_delta;
+#endif
+
+		} _4965;
+#endif
+	};
+
+	struct iwl_hw_params hw_params;
+
+	u32 inta_mask;
+
+	struct workqueue_struct *workqueue;
+
+	struct work_struct restart;
+	struct work_struct scan_completed;
+	struct work_struct rx_replenish;
+	struct work_struct abort_scan;
+
+	struct iwl_rxon_context *beacon_ctx;
+	struct sk_buff *beacon_skb;
+
+	struct work_struct start_internal_scan;
+	struct work_struct tx_flush;
+
+	struct tasklet_struct irq_tasklet;
+
+	struct delayed_work init_alive_start;
+	struct delayed_work alive_start;
+	struct delayed_work scan_check;
+
+	/* TX Power */
+	s8 tx_power_user_lmt;
+	s8 tx_power_device_lmt;
+	s8 tx_power_next;
+
+
+#ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
+	/* debugging info */
+	u32 debug_level; /* per device debugging will override global
+			    iwlegacy_debug_level if set */
+#endif /* CONFIG_IWLWIFI_LEGACY_DEBUG */
+#ifdef CONFIG_IWLWIFI_LEGACY_DEBUGFS
+	/* debugfs */
+	u16 tx_traffic_idx;
+	u16 rx_traffic_idx;
+	u8 *tx_traffic;
+	u8 *rx_traffic;
+	struct dentry *debugfs_dir;
+	u32 dbgfs_sram_offset, dbgfs_sram_len;
+	bool disable_ht40;
+#endif /* CONFIG_IWLWIFI_LEGACY_DEBUGFS */
+
+	struct work_struct txpower_work;
+	u32 disable_sens_cal;
+	u32 disable_chain_noise_cal;
+	u32 disable_tx_power_cal;
+	struct work_struct run_time_calib_work;
+	struct timer_list statistics_periodic;
+	struct timer_list ucode_trace;
+	struct timer_list watchdog;
+	bool hw_ready;
+
+	struct iwl_event_log event_log;
+
+	struct led_classdev led;
+	unsigned long blink_on, blink_off;
+	bool led_registered;
+}; /*iwl_priv */
+
+static inline void iwl_txq_ctx_activate(struct iwl_priv *priv, int txq_id)
+{
+	set_bit(txq_id, &priv->txq_ctx_active_msk);
+}
+
+static inline void iwl_txq_ctx_deactivate(struct iwl_priv *priv, int txq_id)
+{
+	clear_bit(txq_id, &priv->txq_ctx_active_msk);
+}
+
+#ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
+/*
+ * iwl_legacy_get_debug_level: Return active debug level for device
+ *
+ * Using sysfs it is possible to set per device debug level. This debug
+ * level will be used if set, otherwise the global debug level which can be
+ * set via module parameter is used.
+ */
+static inline u32 iwl_legacy_get_debug_level(struct iwl_priv *priv)
+{
+	if (priv->debug_level)
+		return priv->debug_level;
+	else
+		return iwlegacy_debug_level;
+}
+#else
+static inline u32 iwl_legacy_get_debug_level(struct iwl_priv *priv)
+{
+	return iwlegacy_debug_level;
+}
+#endif
+
+
+static inline struct ieee80211_hdr *
+iwl_legacy_tx_queue_get_hdr(struct iwl_priv *priv,
+						 int txq_id, int idx)
+{
+	if (priv->txq[txq_id].txb[idx].skb)
+		return (struct ieee80211_hdr *)priv->txq[txq_id].
+				txb[idx].skb->data;
+	return NULL;
+}
+
+static inline struct iwl_rxon_context *
+iwl_legacy_rxon_ctx_from_vif(struct ieee80211_vif *vif)
+{
+	struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
+
+	return vif_priv->ctx;
+}
+
+#define for_each_context(priv, ctx)				\
+	for (ctx = &priv->contexts[IWL_RXON_CTX_BSS];		\
+	     ctx < &priv->contexts[NUM_IWL_RXON_CTX]; ctx++)	\
+		if (priv->valid_contexts & BIT(ctx->ctxid))
+
+static inline int iwl_legacy_is_associated(struct iwl_priv *priv,
+				    enum iwl_rxon_context_id ctxid)
+{
+	return (priv->contexts[ctxid].active.filter_flags &
+			RXON_FILTER_ASSOC_MSK) ? 1 : 0;
+}
+
+static inline int iwl_legacy_is_any_associated(struct iwl_priv *priv)
+{
+	return iwl_legacy_is_associated(priv, IWL_RXON_CTX_BSS);
+}
+
+static inline int iwl_legacy_is_associated_ctx(struct iwl_rxon_context *ctx)
+{
+	return (ctx->active.filter_flags & RXON_FILTER_ASSOC_MSK) ? 1 : 0;
+}
+
+static inline int iwl_legacy_is_channel_valid(const struct iwl_channel_info *ch_info)
+{
+	if (ch_info == NULL)
+		return 0;
+	return (ch_info->flags & EEPROM_CHANNEL_VALID) ? 1 : 0;
+}
+
+static inline int iwl_legacy_is_channel_radar(const struct iwl_channel_info *ch_info)
+{
+	return (ch_info->flags & EEPROM_CHANNEL_RADAR) ? 1 : 0;
+}
+
+static inline u8 iwl_legacy_is_channel_a_band(const struct iwl_channel_info *ch_info)
+{
+	return ch_info->band == IEEE80211_BAND_5GHZ;
+}
+
+static inline int
+iwl_legacy_is_channel_passive(const struct iwl_channel_info *ch)
+{
+	return (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) ? 1 : 0;
+}
+
+static inline void
+__iwl_legacy_free_pages(struct iwl_priv *priv, struct page *page)
+{
+	__free_pages(page, priv->hw_params.rx_page_order);
+	priv->alloc_rxb_page--;
+}
+
+static inline void iwl_legacy_free_pages(struct iwl_priv *priv, unsigned long page)
+{
+	free_pages(page, priv->hw_params.rx_page_order);
+	priv->alloc_rxb_page--;
+}
+#endif				/* __iwl_legacy_dev_h__ */