summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/iwlwifi/iwl-6000.c
diff options
context:
space:
mode:
authorJohannes Berg <johannes.berg@intel.com>2011-11-17 17:51:53 +0100
committerWey-Yi Guy <wey-yi.w.guy@intel.com>2011-11-25 19:49:04 +0100
commit93b64105e5642728cfc441e20a42164323fe4ad0 (patch)
treea9d0ddd217744d94e3405f93c210c5d50a8a7f6e /drivers/net/wireless/iwlwifi/iwl-6000.c
parentiwlwifi: add tm commands for indirect register access (diff)
downloadlinux-93b64105e5642728cfc441e20a42164323fe4ad0.tar.xz
linux-93b64105e5642728cfc441e20a42164323fe4ad0.zip
iwlagn: remove calibration knowledge
The init microcode knows very well which calibrations are required and sends us results for those that are. Consequently, we can just send all of those to the RT uCode again. The problem with having the driver know about this is that it is a uCode feature, not a hardware feature so the config is completely unsuitable. The only thing we need to check is whether the device needs crystal calibration or not, add a new parameter to the configuration for that. This makes new uCode work on 6000 series devices. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Diffstat (limited to 'drivers/net/wireless/iwlwifi/iwl-6000.c')
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-6000.c15
1 files changed, 0 insertions, 15 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index ee3363fdf309..09f037824f81 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -164,17 +164,7 @@ static int iwl6000_hw_set_hw_params(struct iwl_priv *priv)
iwl6000_set_ct_threshold(priv);
/* Set initial sensitivity parameters */
- /* Set initial calibration set */
hw_params(priv).sens = &iwl6000_sensitivity;
- hw_params(priv).calib_init_cfg =
- BIT(IWL_CALIB_XTAL) |
- BIT(IWL_CALIB_LO) |
- BIT(IWL_CALIB_TX_IQ) |
- BIT(IWL_CALIB_BASE_BAND);
- if (priv->cfg->need_dc_calib)
- hw_params(priv).calib_rt_cfg |= IWL_CALIB_CFG_DC_IDX;
- if (priv->cfg->need_temp_offset_calib)
- hw_params(priv).calib_init_cfg |= BIT(IWL_CALIB_TEMP_OFFSET);
return 0;
}
@@ -364,7 +354,6 @@ static struct iwl_bt_params iwl6000_bt_params = {
.eeprom_calib_ver = EEPROM_6005_TX_POWER_VERSION, \
.lib = &iwl6000_lib, \
.base_params = &iwl6000_g2_base_params, \
- .need_dc_calib = true, \
.need_temp_offset_calib = true, \
.led_mode = IWL_LED_RF_STATE
@@ -406,7 +395,6 @@ struct iwl_cfg iwl6005_2agn_d_cfg = {
.lib = &iwl6030_lib, \
.base_params = &iwl6000_g2_base_params, \
.bt_params = &iwl6000_bt_params, \
- .need_dc_calib = true, \
.need_temp_offset_calib = true, \
.led_mode = IWL_LED_RF_STATE, \
.adv_pm = true \
@@ -506,7 +494,6 @@ struct iwl_cfg iwl6000i_2bg_cfg = {
.eeprom_ver = EEPROM_6050_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION, \
.base_params = &iwl6050_base_params, \
- .need_dc_calib = true, \
.led_mode = IWL_LED_BLINK, \
.internal_wimax_coex = true
@@ -530,7 +517,6 @@ struct iwl_cfg iwl6050_2abg_cfg = {
.eeprom_ver = EEPROM_6150_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_6150_TX_POWER_VERSION, \
.base_params = &iwl6050_base_params, \
- .need_dc_calib = true, \
.led_mode = IWL_LED_BLINK, \
.internal_wimax_coex = true
@@ -555,7 +541,6 @@ struct iwl_cfg iwl6000_3agn_cfg = {
.lib = &iwl6000_lib,
.base_params = &iwl6000_base_params,
.ht_params = &iwl6000_ht_params,
- .need_dc_calib = true,
.led_mode = IWL_LED_BLINK,
};