iwlwifi: mvm: Upgrade to a new power management uAPSD API

Change power management implementation to support new host-device API
containing uAPSD parameters. Verify FW support for this new API.
Use the new power table command (0xA9) to configure power management.
Use the legacy command (0x77) if FW does not support the new API.
New file power_legacy.c is introduced for legacy implementation.

Signed-off-by: Alexander Bondar <alexander.bondar@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

1 files changed, 74 insertions, 1 deletions

diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h
index a6da359a80c3..300211d79f2a 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h
@@ -79,6 +79,10 @@
  *		'1' Driver enables PM (use rest of parameters)
  * @POWER_FLAGS_SKIP_OVER_DTIM_MSK: '0' PM have to walk up every DTIM,
  *		'1' PM could sleep over DTIM till listen Interval.
+ * @POWER_FLAGS_SNOOZE_ENA_MSK: Enable snoozing only if uAPSD is enabled and all
+ *		access categories are both delivery and trigger enabled.
+ * @POWER_FLAGS_BT_SCO_ENA: Enable BT SCO coex only if uAPSD and
+ *		PBW Snoozing enabled
  * @POWER_FLAGS_ADVANCE_PM_ENA_MSK: Advanced PM (uAPSD) enable mask
  * @POWER_FLAGS_LPRX_ENA_MSK: Low Power RX enable.
 */
@@ -86,6 +90,8 @@ enum iwl_power_flags {
 	POWER_FLAGS_POWER_SAVE_ENA_MSK		= BIT(0),
 	POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK	= BIT(1),
 	POWER_FLAGS_SKIP_OVER_DTIM_MSK		= BIT(2),
+	POWER_FLAGS_SNOOZE_ENA_MSK		= BIT(5),
+	POWER_FLAGS_BT_SCO_ENA			= BIT(8),
 	POWER_FLAGS_ADVANCE_PM_ENA_MSK		= BIT(9),
 	POWER_FLAGS_LPRX_ENA_MSK		= BIT(11),
 };
@@ -93,7 +99,8 @@ enum iwl_power_flags {
 #define IWL_POWER_VEC_SIZE 5
 
 /**
- * struct iwl_powertable_cmd - Power Table Command
+ * struct iwl_powertable_cmd - legacy power command. Beside old API support this
+ *	is used also with a new	power API for device wide power settings.
  * POWER_TABLE_CMD = 0x77 (command, has simple generic response)
  *
  * @flags:		Power table command flags from POWER_FLAGS_*
@@ -125,6 +132,72 @@ struct iwl_powertable_cmd {
 } __packed;
 
 /**
+ * struct iwl_mac_power_cmd - New power command containing uAPSD support
+ * MAC_PM_POWER_TABLE = 0xA9 (command, has simple generic response)
+ * @id_and_color:	MAC contex identifier
+ * @flags:		Power table command flags from POWER_FLAGS_*
+ * @keep_alive_seconds:	Keep alive period in seconds. Default - 25 sec.
+ *			Minimum allowed:- 3 * DTIM. Keep alive period must be
+ *			set regardless of power scheme or current power state.
+ *			FW use this value also when PM is disabled.
+ * @rx_data_timeout:    Minimum time (usec) from last Rx packet for AM to
+ *			PSM transition - legacy PM
+ * @tx_data_timeout:    Minimum time (usec) from last Tx packet for AM to
+ *			PSM transition - legacy PM
+ * @sleep_interval:	not in use
+ * @skip_dtim_periods:	Number of DTIM periods to skip if Skip over DTIM flag
+ *			is set. For example, if it is required to skip over
+ *			one DTIM, this value need to be set to 2 (DTIM periods).
+ * @rx_data_timeout_uapsd: Minimum time (usec) from last Rx packet for AM to
+ *			PSM transition - uAPSD
+ * @tx_data_timeout_uapsd: Minimum time (usec) from last Tx packet for AM to
+ *			PSM transition - uAPSD
+ * @lprx_rssi_threshold: Signal strength up to which LP RX can be enabled.
+ *			Default: 80dbm
+ * @num_skip_dtim:	Number of DTIMs to skip if Skip over DTIM flag is set
+ * @snooze_interval:	TBD
+ * @snooze_window:	TBD
+ * @snooze_step:	TBD
+ * @qndp_tid:		TID client shall use for uAPSD QNDP triggers
+ * @uapsd_ac_flags:	Set trigger-enabled and delivery-enabled indication for
+ *			each corresponding AC.
+ *			Use IEEE80211_WMM_IE_STA_QOSINFO_AC* for correct values.
+ * @uapsd_max_sp:	Use IEEE80211_WMM_IE_STA_QOSINFO_SP_* for correct
+ *			values.
+ * @heavy_traffic_thr_tx_pkts:	TX threshold measured in number of packets
+ * @heavy_traffic_thr_rx_pkts:	RX threshold measured in number of packets
+ * @heavy_traffic_thr_tx_load:	TX threshold measured in load's percentage
+ * @heavy_traffic_thr_rx_load:	RX threshold measured in load's percentage
+ * @limited_ps_threshold:
+*/
+struct iwl_mac_power_cmd {
+	/* CONTEXT_DESC_API_T_VER_1 */
+	__le32 id_and_color;
+
+	/* CLIENT_PM_POWER_TABLE_S_VER_1 */
+	__le16 flags;
+	__le16 keep_alive_seconds;
+	__le32 rx_data_timeout;
+	__le32 tx_data_timeout;
+	__le32 rx_data_timeout_uapsd;
+	__le32 tx_data_timeout_uapsd;
+	u8 lprx_rssi_threshold;
+	u8 skip_dtim_periods;
+	__le16 snooze_interval;
+	__le16 snooze_window;
+	u8 snooze_step;
+	u8 qndp_tid;
+	u8 uapsd_ac_flags;
+	u8 uapsd_max_sp;
+	u8 heavy_traffic_threshold_tx_packets;
+	u8 heavy_traffic_threshold_rx_packets;
+	u8 heavy_traffic_threshold_tx_percentage;
+	u8 heavy_traffic_threshold_rx_percentage;
+	u8 limited_ps_threshold;
+	u8 reserved;
+} __packed;
+
+/**
  * struct iwl_beacon_filter_cmd
  * REPLY_BEACON_FILTERING_CMD = 0xd2 (command)
  * @id_and_color: MAC contex identifier