libertas: move under marvell vendor directory

Part of reorganising wireless drivers directory and Kconfig.

Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

1 files changed, 0 insertions, 978 deletions

diff --git a/drivers/net/wireless/libertas/host.h b/drivers/net/wireless/libertas/host.h
deleted file mode 100644
index 96726f79a1dd..000000000000
--- a/drivers/net/wireless/libertas/host.h
+++ /dev/null
@@ -1,978 +0,0 @@
-/*
- * This file function prototypes, data structure
- * and  definitions for all the host/station commands
- */
-
-#ifndef _LBS_HOST_H_
-#define _LBS_HOST_H_
-
-#include "types.h"
-#include "defs.h"
-
-#define DEFAULT_AD_HOC_CHANNEL                  6
-
-#define CMD_OPTION_WAITFORRSP                   0x0002
-
-/* Host command IDs */
-
-/*
- * Return command are almost always the same as the host command, but with
- * bit 15 set high.  There are a few exceptions, though...
- */
-#define CMD_RET(cmd)                            (0x8000 | cmd)
-
-/* Return command convention exceptions: */
-#define CMD_RET_802_11_ASSOCIATE                0x8012
-
-/* Command codes */
-#define CMD_GET_HW_SPEC                         0x0003
-#define CMD_EEPROM_UPDATE                       0x0004
-#define CMD_802_11_RESET                        0x0005
-#define CMD_802_11_SCAN                         0x0006
-#define CMD_802_11_GET_LOG                      0x000b
-#define CMD_MAC_MULTICAST_ADR                   0x0010
-#define CMD_802_11_AUTHENTICATE                 0x0011
-#define CMD_802_11_EEPROM_ACCESS                0x0059
-#define CMD_802_11_ASSOCIATE                    0x0050
-#define CMD_802_11_SET_WEP                      0x0013
-#define CMD_802_11_GET_STAT                     0x0014
-#define CMD_802_3_GET_STAT                      0x0015
-#define CMD_802_11_SNMP_MIB                     0x0016
-#define CMD_MAC_REG_MAP                         0x0017
-#define CMD_BBP_REG_MAP                         0x0018
-#define CMD_MAC_REG_ACCESS                      0x0019
-#define CMD_BBP_REG_ACCESS                      0x001a
-#define CMD_RF_REG_ACCESS                       0x001b
-#define CMD_802_11_RADIO_CONTROL                0x001c
-#define CMD_802_11_RF_CHANNEL                   0x001d
-#define CMD_802_11_RF_TX_POWER                  0x001e
-#define CMD_802_11_RSSI                         0x001f
-#define CMD_802_11_RF_ANTENNA                   0x0020
-#define CMD_802_11_PS_MODE                      0x0021
-#define CMD_802_11_DATA_RATE                    0x0022
-#define CMD_RF_REG_MAP                          0x0023
-#define CMD_802_11_DEAUTHENTICATE               0x0024
-#define CMD_802_11_REASSOCIATE                  0x0025
-#define CMD_MAC_CONTROL                         0x0028
-#define CMD_802_11_AD_HOC_START                 0x002b
-#define CMD_802_11_AD_HOC_JOIN                  0x002c
-#define CMD_802_11_QUERY_TKIP_REPLY_CNTRS       0x002e
-#define CMD_802_11_ENABLE_RSN                   0x002f
-#define CMD_802_11_SET_AFC                      0x003c
-#define CMD_802_11_GET_AFC                      0x003d
-#define CMD_802_11_DEEP_SLEEP                   0x003e
-#define CMD_802_11_AD_HOC_STOP                  0x0040
-#define CMD_802_11_HOST_SLEEP_CFG               0x0043
-#define CMD_802_11_WAKEUP_CONFIRM               0x0044
-#define CMD_802_11_HOST_SLEEP_ACTIVATE          0x0045
-#define CMD_802_11_BEACON_STOP                  0x0049
-#define CMD_802_11_MAC_ADDRESS                  0x004d
-#define CMD_802_11_LED_GPIO_CTRL                0x004e
-#define CMD_802_11_BAND_CONFIG                  0x0058
-#define CMD_GSPI_BUS_CONFIG                     0x005a
-#define CMD_802_11D_DOMAIN_INFO                 0x005b
-#define CMD_802_11_KEY_MATERIAL                 0x005e
-#define CMD_802_11_SLEEP_PARAMS                 0x0066
-#define CMD_802_11_INACTIVITY_TIMEOUT           0x0067
-#define CMD_802_11_SLEEP_PERIOD                 0x0068
-#define CMD_802_11_TPC_CFG                      0x0072
-#define CMD_802_11_PA_CFG                       0x0073
-#define CMD_802_11_FW_WAKE_METHOD               0x0074
-#define CMD_802_11_SUBSCRIBE_EVENT              0x0075
-#define CMD_802_11_RATE_ADAPT_RATESET           0x0076
-#define CMD_802_11_TX_RATE_QUERY                0x007f
-#define CMD_GET_TSF                             0x0080
-#define CMD_BT_ACCESS                           0x0087
-#define CMD_FWT_ACCESS                          0x0095
-#define CMD_802_11_MONITOR_MODE                 0x0098
-#define CMD_MESH_ACCESS                         0x009b
-#define CMD_MESH_CONFIG_OLD                     0x00a3
-#define CMD_MESH_CONFIG                         0x00ac
-#define CMD_SET_BOOT2_VER                       0x00a5
-#define CMD_FUNC_INIT                           0x00a9
-#define CMD_FUNC_SHUTDOWN                       0x00aa
-#define CMD_802_11_BEACON_CTRL                  0x00b0
-
-/* For the IEEE Power Save */
-#define PS_MODE_ACTION_ENTER_PS                 0x0030
-#define PS_MODE_ACTION_EXIT_PS                  0x0031
-#define PS_MODE_ACTION_SLEEP_CONFIRMED          0x0034
-
-#define CMD_ENABLE_RSN                          0x0001
-#define CMD_DISABLE_RSN                         0x0000
-
-#define CMD_ACT_GET                             0x0000
-#define CMD_ACT_SET                             0x0001
-
-/* Define action or option for CMD_802_11_SET_WEP */
-#define CMD_ACT_ADD                             0x0002
-#define CMD_ACT_REMOVE                          0x0004
-
-#define CMD_TYPE_WEP_40_BIT                     0x01
-#define CMD_TYPE_WEP_104_BIT                    0x02
-
-#define CMD_NUM_OF_WEP_KEYS                     4
-
-#define CMD_WEP_KEY_INDEX_MASK                  0x3fff
-
-/* Define action or option for CMD_802_11_SCAN */
-#define CMD_BSS_TYPE_BSS                        0x0001
-#define CMD_BSS_TYPE_IBSS                       0x0002
-#define CMD_BSS_TYPE_ANY                        0x0003
-
-/* Define action or option for CMD_802_11_SCAN */
-#define CMD_SCAN_TYPE_ACTIVE                    0x0000
-#define CMD_SCAN_TYPE_PASSIVE                   0x0001
-
-#define CMD_SCAN_RADIO_TYPE_BG                  0
-
-#define CMD_SCAN_PROBE_DELAY_TIME               0
-
-/* Define action or option for CMD_MAC_CONTROL */
-#define CMD_ACT_MAC_RX_ON                       0x0001
-#define CMD_ACT_MAC_TX_ON                       0x0002
-#define CMD_ACT_MAC_LOOPBACK_ON                 0x0004
-#define CMD_ACT_MAC_WEP_ENABLE                  0x0008
-#define CMD_ACT_MAC_INT_ENABLE                  0x0010
-#define CMD_ACT_MAC_MULTICAST_ENABLE            0x0020
-#define CMD_ACT_MAC_BROADCAST_ENABLE            0x0040
-#define CMD_ACT_MAC_PROMISCUOUS_ENABLE          0x0080
-#define CMD_ACT_MAC_ALL_MULTICAST_ENABLE        0x0100
-#define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE    0x0400
-
-/* Event flags for CMD_802_11_SUBSCRIBE_EVENT */
-#define CMD_SUBSCRIBE_RSSI_LOW                  0x0001
-#define CMD_SUBSCRIBE_SNR_LOW                   0x0002
-#define CMD_SUBSCRIBE_FAILCOUNT                 0x0004
-#define CMD_SUBSCRIBE_BCNMISS                   0x0008
-#define CMD_SUBSCRIBE_RSSI_HIGH                 0x0010
-#define CMD_SUBSCRIBE_SNR_HIGH                  0x0020
-
-#define RADIO_PREAMBLE_LONG                     0x00
-#define RADIO_PREAMBLE_SHORT                    0x02
-#define RADIO_PREAMBLE_AUTO                     0x04
-
-/* Define action or option for CMD_802_11_RF_CHANNEL */
-#define CMD_OPT_802_11_RF_CHANNEL_GET           0x00
-#define CMD_OPT_802_11_RF_CHANNEL_SET           0x01
-
-/* Define action or option for CMD_802_11_DATA_RATE */
-#define CMD_ACT_SET_TX_AUTO                     0x0000
-#define CMD_ACT_SET_TX_FIX_RATE                 0x0001
-#define CMD_ACT_GET_TX_RATE                     0x0002
-
-/* Options for CMD_802_11_FW_WAKE_METHOD */
-#define CMD_WAKE_METHOD_UNCHANGED               0x0000
-#define CMD_WAKE_METHOD_COMMAND_INT             0x0001
-#define CMD_WAKE_METHOD_GPIO                    0x0002
-
-/* Object IDs for CMD_802_11_SNMP_MIB */
-#define SNMP_MIB_OID_BSS_TYPE                   0x0000
-#define SNMP_MIB_OID_OP_RATE_SET                0x0001
-#define SNMP_MIB_OID_BEACON_PERIOD              0x0002  /* Reserved on v9+ */
-#define SNMP_MIB_OID_DTIM_PERIOD                0x0003  /* Reserved on v9+ */
-#define SNMP_MIB_OID_ASSOC_TIMEOUT              0x0004  /* Reserved on v9+ */
-#define SNMP_MIB_OID_RTS_THRESHOLD              0x0005
-#define SNMP_MIB_OID_SHORT_RETRY_LIMIT          0x0006
-#define SNMP_MIB_OID_LONG_RETRY_LIMIT           0x0007
-#define SNMP_MIB_OID_FRAG_THRESHOLD             0x0008
-#define SNMP_MIB_OID_11D_ENABLE                 0x0009
-#define SNMP_MIB_OID_11H_ENABLE                 0x000A
-
-/* Define action or option for CMD_BT_ACCESS */
-enum cmd_bt_access_opts {
-	/* The bt commands start at 5 instead of 1 because the old dft commands
-	 * are mapped to 1-4.  These old commands are no longer maintained and
-	 * should not be called.
-	 */
-	CMD_ACT_BT_ACCESS_ADD = 5,
-	CMD_ACT_BT_ACCESS_DEL,
-	CMD_ACT_BT_ACCESS_LIST,
-	CMD_ACT_BT_ACCESS_RESET,
-	CMD_ACT_BT_ACCESS_SET_INVERT,
-	CMD_ACT_BT_ACCESS_GET_INVERT
-};
-
-/* Define action or option for CMD_FWT_ACCESS */
-enum cmd_fwt_access_opts {
-	CMD_ACT_FWT_ACCESS_ADD = 1,
-	CMD_ACT_FWT_ACCESS_DEL,
-	CMD_ACT_FWT_ACCESS_LOOKUP,
-	CMD_ACT_FWT_ACCESS_LIST,
-	CMD_ACT_FWT_ACCESS_LIST_ROUTE,
-	CMD_ACT_FWT_ACCESS_LIST_NEIGHBOR,
-	CMD_ACT_FWT_ACCESS_RESET,
-	CMD_ACT_FWT_ACCESS_CLEANUP,
-	CMD_ACT_FWT_ACCESS_TIME,
-};
-
-/* Define action or option for CMD_802_11_HOST_SLEEP_CFG */
-enum cmd_wol_cfg_opts {
-	CMD_ACT_ACTION_NONE = 0,
-	CMD_ACT_SET_WOL_RULE,
-	CMD_ACT_GET_WOL_RULE,
-	CMD_ACT_RESET_WOL_RULE,
-};
-
-/* Define action or option for CMD_MESH_ACCESS */
-enum cmd_mesh_access_opts {
-	CMD_ACT_MESH_GET_TTL = 1,
-	CMD_ACT_MESH_SET_TTL,
-	CMD_ACT_MESH_GET_STATS,
-	CMD_ACT_MESH_GET_ANYCAST,
-	CMD_ACT_MESH_SET_ANYCAST,
-	CMD_ACT_MESH_SET_LINK_COSTS,
-	CMD_ACT_MESH_GET_LINK_COSTS,
-	CMD_ACT_MESH_SET_BCAST_RATE,
-	CMD_ACT_MESH_GET_BCAST_RATE,
-	CMD_ACT_MESH_SET_RREQ_DELAY,
-	CMD_ACT_MESH_GET_RREQ_DELAY,
-	CMD_ACT_MESH_SET_ROUTE_EXP,
-	CMD_ACT_MESH_GET_ROUTE_EXP,
-	CMD_ACT_MESH_SET_AUTOSTART_ENABLED,
-	CMD_ACT_MESH_GET_AUTOSTART_ENABLED,
-	CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT = 17,
-};
-
-/* Define actions and types for CMD_MESH_CONFIG */
-enum cmd_mesh_config_actions {
-	CMD_ACT_MESH_CONFIG_STOP = 0,
-	CMD_ACT_MESH_CONFIG_START,
-	CMD_ACT_MESH_CONFIG_SET,
-	CMD_ACT_MESH_CONFIG_GET,
-};
-
-enum cmd_mesh_config_types {
-	CMD_TYPE_MESH_SET_BOOTFLAG = 1,
-	CMD_TYPE_MESH_SET_BOOTTIME,
-	CMD_TYPE_MESH_SET_DEF_CHANNEL,
-	CMD_TYPE_MESH_SET_MESH_IE,
-	CMD_TYPE_MESH_GET_DEFAULTS,
-	CMD_TYPE_MESH_GET_MESH_IE, /* GET_DEFAULTS is superset of GET_MESHIE */
-};
-
-/* Card Event definition */
-#define MACREG_INT_CODE_TX_PPA_FREE		0
-#define MACREG_INT_CODE_TX_DMA_DONE		1
-#define MACREG_INT_CODE_LINK_LOST_W_SCAN	2
-#define MACREG_INT_CODE_LINK_LOST_NO_SCAN	3
-#define MACREG_INT_CODE_LINK_SENSED		4
-#define MACREG_INT_CODE_CMD_FINISHED		5
-#define MACREG_INT_CODE_MIB_CHANGED		6
-#define MACREG_INT_CODE_INIT_DONE		7
-#define MACREG_INT_CODE_DEAUTHENTICATED		8
-#define MACREG_INT_CODE_DISASSOCIATED		9
-#define MACREG_INT_CODE_PS_AWAKE		10
-#define MACREG_INT_CODE_PS_SLEEP		11
-#define MACREG_INT_CODE_MIC_ERR_MULTICAST	13
-#define MACREG_INT_CODE_MIC_ERR_UNICAST		14
-#define MACREG_INT_CODE_WM_AWAKE		15
-#define MACREG_INT_CODE_DEEP_SLEEP_AWAKE	16
-#define MACREG_INT_CODE_ADHOC_BCN_LOST		17
-#define MACREG_INT_CODE_HOST_AWAKE		18
-#define MACREG_INT_CODE_STOP_TX			19
-#define MACREG_INT_CODE_START_TX		20
-#define MACREG_INT_CODE_CHANNEL_SWITCH		21
-#define MACREG_INT_CODE_MEASUREMENT_RDY		22
-#define MACREG_INT_CODE_WMM_CHANGE		23
-#define MACREG_INT_CODE_BG_SCAN_REPORT		24
-#define MACREG_INT_CODE_RSSI_LOW		25
-#define MACREG_INT_CODE_SNR_LOW			26
-#define MACREG_INT_CODE_MAX_FAIL		27
-#define MACREG_INT_CODE_RSSI_HIGH		28
-#define MACREG_INT_CODE_SNR_HIGH		29
-#define MACREG_INT_CODE_MESH_AUTO_STARTED	35
-#define MACREG_INT_CODE_FIRMWARE_READY		48
-
-
-/* 802.11-related definitions */
-
-/* TxPD descriptor */
-struct txpd {
-	/* union to cope up with later FW revisions */
-	union {
-		/* Current Tx packet status */
-		__le32 tx_status;
-		struct {
-			/* BSS type: client, AP, etc. */
-			u8 bss_type;
-			/* BSS number */
-			u8 bss_num;
-			/* Reserved */
-			__le16 reserved;
-		} bss;
-	} u;
-	/* Tx control */
-	__le32 tx_control;
-	__le32 tx_packet_location;
-	/* Tx packet length */
-	__le16 tx_packet_length;
-	/* First 2 byte of destination MAC address */
-	u8 tx_dest_addr_high[2];
-	/* Last 4 byte of destination MAC address */
-	u8 tx_dest_addr_low[4];
-	/* Pkt Priority */
-	u8 priority;
-	/* Pkt Trasnit Power control */
-	u8 powermgmt;
-	/* Amount of time the packet has been queued (units = 2ms) */
-	u8 pktdelay_2ms;
-	/* reserved */
-	u8 reserved1;
-} __packed;
-
-/* RxPD Descriptor */
-struct rxpd {
-	/* union to cope up with later FW revisions */
-	union {
-		/* Current Rx packet status */
-		__le16 status;
-		struct {
-			/* BSS type: client, AP, etc. */
-			u8 bss_type;
-			/* BSS number */
-			u8 bss_num;
-		} __packed bss;
-	} __packed u;
-
-	/* SNR */
-	u8 snr;
-
-	/* Tx control */
-	u8 rx_control;
-
-	/* Pkt length */
-	__le16 pkt_len;
-
-	/* Noise Floor */
-	u8 nf;
-
-	/* Rx Packet Rate */
-	u8 rx_rate;
-
-	/* Pkt addr */
-	__le32 pkt_ptr;
-
-	/* Next Rx RxPD addr */
-	__le32 next_rxpd_ptr;
-
-	/* Pkt Priority */
-	u8 priority;
-	u8 reserved[3];
-} __packed;
-
-struct cmd_header {
-	__le16 command;
-	__le16 size;
-	__le16 seqnum;
-	__le16 result;
-} __packed;
-
-/* Generic structure to hold all key types. */
-struct enc_key {
-	u16 len;
-	u16 flags;  /* KEY_INFO_* from defs.h */
-	u16 type; /* KEY_TYPE_* from defs.h */
-	u8 key[32];
-};
-
-/* lbs_offset_value */
-struct lbs_offset_value {
-	u32 offset;
-	u32 value;
-} __packed;
-
-#define MAX_11D_TRIPLETS	83
-
-struct mrvl_ie_domain_param_set {
-	struct mrvl_ie_header header;
-
-	u8 country_code[IEEE80211_COUNTRY_STRING_LEN];
-	struct ieee80211_country_ie_triplet triplet[MAX_11D_TRIPLETS];
-} __packed;
-
-struct cmd_ds_802_11d_domain_info {
-	struct cmd_header hdr;
-
-	__le16 action;
-	struct mrvl_ie_domain_param_set domain;
-} __packed;
-
-/*
- * Define data structure for CMD_GET_HW_SPEC
- * This structure defines the response for the GET_HW_SPEC command
- */
-struct cmd_ds_get_hw_spec {
-	struct cmd_header hdr;
-
-	/* HW Interface version number */
-	__le16 hwifversion;
-	/* HW version number */
-	__le16 version;
-	/* Max number of TxPD FW can handle */
-	__le16 nr_txpd;
-	/* Max no of Multicast address */
-	__le16 nr_mcast_adr;
-	/* MAC address */
-	u8 permanentaddr[6];
-
-	/* region Code */
-	__le16 regioncode;
-
-	/* Number of antenna used */
-	__le16 nr_antenna;
-
-	/* FW release number, example 0x01030304 = 2.3.4p1 */
-	__le32 fwrelease;
-
-	/* Base Address of TxPD queue */
-	__le32 wcb_base;
-	/* Read Pointer of RxPd queue */
-	__le32 rxpd_rdptr;
-
-	/* Write Pointer of RxPd queue */
-	__le32 rxpd_wrptr;
-
-	/*FW/HW capability */
-	__le32 fwcapinfo;
-} __packed;
-
-struct cmd_ds_802_11_subscribe_event {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 events;
-
-	/* A TLV to the CMD_802_11_SUBSCRIBE_EVENT command can contain a
-	 * number of TLVs. From the v5.1 manual, those TLVs would add up to
-	 * 40 bytes. However, future firmware might add additional TLVs, so I
-	 * bump this up a bit.
-	 */
-	uint8_t tlv[128];
-} __packed;
-
-/*
- * This scan handle Country Information IE(802.11d compliant)
- * Define data structure for CMD_802_11_SCAN
- */
-struct cmd_ds_802_11_scan {
-	struct cmd_header hdr;
-
-	uint8_t bsstype;
-	uint8_t bssid[ETH_ALEN];
-	uint8_t tlvbuffer[0];
-} __packed;
-
-struct cmd_ds_802_11_scan_rsp {
-	struct cmd_header hdr;
-
-	__le16 bssdescriptsize;
-	uint8_t nr_sets;
-	uint8_t bssdesc_and_tlvbuffer[0];
-} __packed;
-
-struct cmd_ds_802_11_get_log {
-	struct cmd_header hdr;
-
-	__le32 mcasttxframe;
-	__le32 failed;
-	__le32 retry;
-	__le32 multiretry;
-	__le32 framedup;
-	__le32 rtssuccess;
-	__le32 rtsfailure;
-	__le32 ackfailure;
-	__le32 rxfrag;
-	__le32 mcastrxframe;
-	__le32 fcserror;
-	__le32 txframe;
-	__le32 wepundecryptable;
-} __packed;
-
-struct cmd_ds_mac_control {
-	struct cmd_header hdr;
-	__le16 action;
-	u16 reserved;
-} __packed;
-
-struct cmd_ds_mac_multicast_adr {
-	struct cmd_header hdr;
-	__le16 action;
-	__le16 nr_of_adrs;
-	u8 maclist[ETH_ALEN * MRVDRV_MAX_MULTICAST_LIST_SIZE];
-} __packed;
-
-struct cmd_ds_802_11_authenticate {
-	struct cmd_header hdr;
-
-	u8 bssid[ETH_ALEN];
-	u8 authtype;
-	u8 reserved[10];
-} __packed;
-
-struct cmd_ds_802_11_deauthenticate {
-	struct cmd_header hdr;
-
-	u8 macaddr[ETH_ALEN];
-	__le16 reasoncode;
-} __packed;
-
-struct cmd_ds_802_11_associate {
-	struct cmd_header hdr;
-
-	u8 bssid[6];
-	__le16 capability;
-	__le16 listeninterval;
-	__le16 bcnperiod;
-	u8 dtimperiod;
-	u8 iebuf[512];    /* Enough for required and most optional IEs */
-} __packed;
-
-struct cmd_ds_802_11_associate_response {
-	struct cmd_header hdr;
-
-	__le16 capability;
-	__le16 statuscode;
-	__le16 aid;
-	u8 iebuf[512];
-} __packed;
-
-struct cmd_ds_802_11_set_wep {
-	struct cmd_header hdr;
-
-	/* ACT_ADD, ACT_REMOVE or ACT_ENABLE */
-	__le16 action;
-
-	/* key Index selected for Tx */
-	__le16 keyindex;
-
-	/* 40, 128bit or TXWEP */
-	uint8_t keytype[4];
-	uint8_t keymaterial[4][16];
-} __packed;
-
-struct cmd_ds_802_11_snmp_mib {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 oid;
-	__le16 bufsize;
-	u8 value[128];
-} __packed;
-
-struct cmd_ds_reg_access {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 offset;
-	union {
-		u8 bbp_rf;  /* for BBP and RF registers */
-		__le32 mac; /* for MAC registers */
-	} value;
-} __packed;
-
-struct cmd_ds_802_11_radio_control {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 control;
-} __packed;
-
-struct cmd_ds_802_11_beacon_control {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 beacon_enable;
-	__le16 beacon_period;
-} __packed;
-
-struct cmd_ds_802_11_sleep_params {
-	struct cmd_header hdr;
-
-	/* ACT_GET/ACT_SET */
-	__le16 action;
-
-	/* Sleep clock error in ppm */
-	__le16 error;
-
-	/* Wakeup offset in usec */
-	__le16 offset;
-
-	/* Clock stabilization time in usec */
-	__le16 stabletime;
-
-	/* control periodic calibration */
-	uint8_t calcontrol;
-
-	/* control the use of external sleep clock */
-	uint8_t externalsleepclk;
-
-	/* reserved field, should be set to zero */
-	__le16 reserved;
-} __packed;
-
-struct cmd_ds_802_11_rf_channel {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 channel;
-	__le16 rftype;      /* unused */
-	__le16 reserved;    /* unused */
-	u8 channellist[32]; /* unused */
-} __packed;
-
-struct cmd_ds_802_11_rssi {
-	struct cmd_header hdr;
-
-	/*
-	 * request:  number of beacons (N) to average the SNR and NF over
-	 * response: SNR of most recent beacon
-	 */
-	__le16 n_or_snr;
-
-	/*
-	 * The following fields are only set in the response.
-	 * In the request these are reserved and should be set to 0.
-	 */
-	__le16 nf;       /* most recent beacon noise floor */
-	__le16 avg_snr;  /* average SNR weighted by N from request */
-	__le16 avg_nf;   /* average noise floor weighted by N from request */
-} __packed;
-
-struct cmd_ds_802_11_mac_address {
-	struct cmd_header hdr;
-
-	__le16 action;
-	u8 macadd[ETH_ALEN];
-} __packed;
-
-struct cmd_ds_802_11_rf_tx_power {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 curlevel;
-	s8 maxlevel;
-	s8 minlevel;
-} __packed;
-
-/* MONITOR_MODE only exists in OLPC v5 firmware */
-struct cmd_ds_802_11_monitor_mode {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 mode;
-} __packed;
-
-struct cmd_ds_set_boot2_ver {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 version;
-} __packed;
-
-struct cmd_ds_802_11_fw_wake_method {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 method;
-} __packed;
-
-struct cmd_ds_802_11_ps_mode {
-	struct cmd_header hdr;
-
-	__le16 action;
-
-	/*
-	 * Interval for keepalive in PS mode:
-	 * 0x0000 = don't change
-	 * 0x001E = firmware default
-	 * 0xFFFF = disable
-	 */
-	__le16 nullpktinterval;
-
-	/*
-	 * Number of DTIM intervals to wake up for:
-	 * 0 = don't change
-	 * 1 = firmware default
-	 * 5 = max
-	 */
-	__le16 multipledtim;
-
-	__le16 reserved;
-	__le16 locallisteninterval;
-
-	/*
-	 * AdHoc awake period (FW v9+ only):
-	 * 0 = don't change
-	 * 1 = always awake (IEEE standard behavior)
-	 * 2 - 31 = sleep for (n - 1) periods and awake for 1 period
-	 * 32 - 254 = invalid
-	 * 255 = sleep at each ATIM
-	 */
-	__le16 adhoc_awake_period;
-} __packed;
-
-struct cmd_confirm_sleep {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 nullpktinterval;
-	__le16 multipledtim;
-	__le16 reserved;
-	__le16 locallisteninterval;
-} __packed;
-
-struct cmd_ds_802_11_data_rate {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 reserved;
-	u8 rates[MAX_RATES];
-} __packed;
-
-struct cmd_ds_802_11_rate_adapt_rateset {
-	struct cmd_header hdr;
-	__le16 action;
-	__le16 enablehwauto;
-	__le16 bitmap;
-} __packed;
-
-struct cmd_ds_802_11_ad_hoc_start {
-	struct cmd_header hdr;
-
-	u8 ssid[IEEE80211_MAX_SSID_LEN];
-	u8 bsstype;
-	__le16 beaconperiod;
-	u8 dtimperiod;   /* Reserved on v9 and later */
-	struct ieee_ie_ibss_param_set ibss;
-	u8 reserved1[4];
-	struct ieee_ie_ds_param_set ds;
-	u8 reserved2[4];
-	__le16 probedelay;  /* Reserved on v9 and later */
-	__le16 capability;
-	u8 rates[MAX_RATES];
-	u8 tlv_memory_size_pad[100];
-} __packed;
-
-struct cmd_ds_802_11_ad_hoc_result {
-	struct cmd_header hdr;
-
-	u8 pad[3];
-	u8 bssid[ETH_ALEN];
-} __packed;
-
-struct adhoc_bssdesc {
-	u8 bssid[ETH_ALEN];
-	u8 ssid[IEEE80211_MAX_SSID_LEN];
-	u8 type;
-	__le16 beaconperiod;
-	u8 dtimperiod;
-	__le64 timestamp;
-	__le64 localtime;
-	struct ieee_ie_ds_param_set ds;
-	u8 reserved1[4];
-	struct ieee_ie_ibss_param_set ibss;
-	u8 reserved2[4];
-	__le16 capability;
-	u8 rates[MAX_RATES];
-
-	/*
-	 * DO NOT ADD ANY FIELDS TO THIS STRUCTURE. It is used below in the
-	 * Adhoc join command and will cause a binary layout mismatch with
-	 * the firmware
-	 */
-} __packed;
-
-struct cmd_ds_802_11_ad_hoc_join {
-	struct cmd_header hdr;
-
-	struct adhoc_bssdesc bss;
-	__le16 failtimeout;   /* Reserved on v9 and later */
-	__le16 probedelay;    /* Reserved on v9 and later */
-} __packed;
-
-struct cmd_ds_802_11_ad_hoc_stop {
-	struct cmd_header hdr;
-} __packed;
-
-struct cmd_ds_802_11_enable_rsn {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 enable;
-} __packed;
-
-struct MrvlIEtype_keyParamSet {
-	/* type ID */
-	__le16 type;
-
-	/* length of Payload */
-	__le16 length;
-
-	/* type of key: WEP=0, TKIP=1, AES=2 */
-	__le16 keytypeid;
-
-	/* key control Info specific to a keytypeid */
-	__le16 keyinfo;
-
-	/* length of key */
-	__le16 keylen;
-
-	/* key material of size keylen */
-	u8 key[32];
-} __packed;
-
-#define MAX_WOL_RULES 		16
-
-struct host_wol_rule {
-	uint8_t rule_no;
-	uint8_t rule_ops;
-	__le16 sig_offset;
-	__le16 sig_length;
-	__le16 reserve;
-	__be32 sig_mask;
-	__be32 signature;
-} __packed;
-
-struct wol_config {
-	uint8_t action;
-	uint8_t pattern;
-	uint8_t no_rules_in_cmd;
-	uint8_t result;
-	struct host_wol_rule rule[MAX_WOL_RULES];
-} __packed;
-
-struct cmd_ds_host_sleep {
-	struct cmd_header hdr;
-	__le32 criteria;
-	uint8_t gpio;
-	uint16_t gap;
-	struct wol_config wol_conf;
-} __packed;
-
-
-
-struct cmd_ds_802_11_key_material {
-	struct cmd_header hdr;
-
-	__le16 action;
-	struct MrvlIEtype_keyParamSet keyParamSet[2];
-} __packed;
-
-struct cmd_ds_802_11_eeprom_access {
-	struct cmd_header hdr;
-	__le16 action;
-	__le16 offset;
-	__le16 len;
-	/* firmware says it returns a maximum of 20 bytes */
-#define LBS_EEPROM_READ_LEN 20
-	u8 value[LBS_EEPROM_READ_LEN];
-} __packed;
-
-struct cmd_ds_802_11_tpc_cfg {
-	struct cmd_header hdr;
-
-	__le16 action;
-	uint8_t enable;
-	int8_t P0;
-	int8_t P1;
-	int8_t P2;
-	uint8_t usesnr;
-} __packed;
-
-
-struct cmd_ds_802_11_pa_cfg {
-	struct cmd_header hdr;
-
-	__le16 action;
-	uint8_t enable;
-	int8_t P0;
-	int8_t P1;
-	int8_t P2;
-} __packed;
-
-
-struct cmd_ds_802_11_led_ctrl {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 numled;
-	u8 data[256];
-} __packed;
-
-/* Automatic Frequency Control */
-struct cmd_ds_802_11_afc {
-	struct cmd_header hdr;
-
-	__le16 afc_auto;
-	union {
-		struct {
-			__le16 threshold;
-			__le16 period;
-		};
-		struct {
-			__le16 timing_offset; /* signed */
-			__le16 carrier_offset; /* signed */
-		};
-	};
-} __packed;
-
-struct cmd_tx_rate_query {
-	__le16 txrate;
-} __packed;
-
-struct cmd_ds_get_tsf {
-	__le64 tsfvalue;
-} __packed;
-
-struct cmd_ds_bt_access {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le32 id;
-	u8 addr1[ETH_ALEN];
-	u8 addr2[ETH_ALEN];
-} __packed;
-
-struct cmd_ds_fwt_access {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le32 id;
-	u8 valid;
-	u8 da[ETH_ALEN];
-	u8 dir;
-	u8 ra[ETH_ALEN];
-	__le32 ssn;
-	__le32 dsn;
-	__le32 metric;
-	u8 rate;
-	u8 hopcount;
-	u8 ttl;
-	__le32 expiration;
-	u8 sleepmode;
-	__le32 snr;
-	__le32 references;
-	u8 prec[ETH_ALEN];
-} __packed;
-
-struct cmd_ds_mesh_config {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 channel;
-	__le16 type;
-	__le16 length;
-	u8 data[128];	/* last position reserved */
-} __packed;
-
-struct cmd_ds_mesh_access {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le32 data[32];	/* last position reserved */
-} __packed;
-
-/* Number of stats counters returned by the firmware */
-#define MESH_STATS_NUM 8
-#endif