qtnfmac: updates for regulatory support

On startup driver obtains regulatory rules from firmware and
enables them during wiphy registration. Later on regulatory
domain change can be requested by host. In this case firmware
is notified about the upcoming changes. If the change is valid,
then firmware updates hardware channel configuration and host
driver receives updated channel info for each band.

Signed-off-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com>
Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: Avinash Patil <avinashp@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

1 files changed, 118 insertions, 8 deletions

diff --git a/drivers/net/wireless/quantenna/qtnfmac/qlink.h b/drivers/net/wireless/quantenna/qtnfmac/qlink.h
index 6eafc15e0065..e27833b78940 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/qlink.h
+++ b/drivers/net/wireless/quantenna/qtnfmac/qlink.h
@@ -19,7 +19,7 @@
 
 #include <linux/ieee80211.h>
 
-#define QLINK_PROTO_VER		3
+#define QLINK_PROTO_VER		4
 
 #define QLINK_MACID_RSVD		0xFF
 #define QLINK_VIFID_RSVD		0xFF
@@ -133,6 +133,9 @@ enum qlink_channel_width {
  *	number of operational channels and information on each of the channel.
  *	This command is generic to a specified MAC, interface index must be set
  *	to QLINK_VIFID_RSVD in command header.
+ * @QLINK_CMD_REG_NOTIFY: notify device about regulatory domain change. This
+ *	command is supported only if device reports QLINK_HW_SUPPORTS_REG_UPDATE
+ *	capability.
  */
 enum qlink_cmd_type {
 	QLINK_CMD_FW_INIT		= 0x0001,
@@ -148,7 +151,7 @@ enum qlink_cmd_type {
 	QLINK_CMD_DEL_INTF		= 0x0016,
 	QLINK_CMD_CHANGE_INTF		= 0x0017,
 	QLINK_CMD_UPDOWN_INTF		= 0x0018,
-	QLINK_CMD_REG_REGION		= 0x0019,
+	QLINK_CMD_REG_NOTIFY		= 0x0019,
 	QLINK_CMD_CHANS_INFO_GET	= 0x001A,
 	QLINK_CMD_CONFIG_AP		= 0x0020,
 	QLINK_CMD_START_AP		= 0x0021,
@@ -430,6 +433,44 @@ struct qlink_cmd_chans_info_get {
 	u8 band;
 } __packed;
 
+/**
+ * enum qlink_reg_initiator - Indicates the initiator of a reg domain request
+ *
+ * See &enum nl80211_reg_initiator for more info.
+ */
+enum qlink_reg_initiator {
+	QLINK_REGDOM_SET_BY_CORE,
+	QLINK_REGDOM_SET_BY_USER,
+	QLINK_REGDOM_SET_BY_DRIVER,
+	QLINK_REGDOM_SET_BY_COUNTRY_IE,
+};
+
+/**
+ * enum qlink_user_reg_hint_type - type of user regulatory hint
+ *
+ * See &enum nl80211_user_reg_hint_type for more info.
+ */
+enum qlink_user_reg_hint_type {
+	QLINK_USER_REG_HINT_USER	= 0,
+	QLINK_USER_REG_HINT_CELL_BASE	= 1,
+	QLINK_USER_REG_HINT_INDOOR	= 2,
+};
+
+/**
+ * struct qlink_cmd_reg_notify - data for QLINK_CMD_REG_NOTIFY command
+ *
+ * @alpha2: the ISO / IEC 3166 alpha2 country code.
+ * @initiator: which entity sent the request, one of &enum qlink_reg_initiator.
+ * @user_reg_hint_type: type of hint for QLINK_REGDOM_SET_BY_USER request, one
+ *	of &enum qlink_user_reg_hint_type.
+ */
+struct qlink_cmd_reg_notify {
+	struct qlink_cmd chdr;
+	u8 alpha2[2];
+	u8 initiator;
+	u8 user_reg_hint_type;
+} __packed;
+
 /* QLINK Command Responses messages related definitions
  */
 
@@ -438,6 +479,7 @@ enum qlink_cmd_result {
 	QLINK_CMD_RESULT_INVALID,
 	QLINK_CMD_RESULT_ENOTSUPP,
 	QLINK_CMD_RESULT_ENOTFOUND,
+	QLINK_CMD_RESULT_EALREADY,
 };
 
 /**
@@ -497,6 +539,18 @@ struct qlink_resp_get_mac_info {
 } __packed;
 
 /**
+ * enum qlink_dfs_regions - regulatory DFS regions
+ *
+ * Corresponds to &enum nl80211_dfs_regions.
+ */
+enum qlink_dfs_regions {
+	QLINK_DFS_UNSET	= 0,
+	QLINK_DFS_FCC	= 1,
+	QLINK_DFS_ETSI	= 2,
+	QLINK_DFS_JP	= 3,
+};
+
+/**
  * struct qlink_resp_get_hw_info - response for QLINK_CMD_GET_HW_INFO command
  *
  * Description of wireless hardware capabilities and features.
@@ -504,22 +558,29 @@ struct qlink_resp_get_mac_info {
  * @fw_ver: wireless hardware firmware version.
  * @hw_capab: Bitmap of capabilities supported by firmware.
  * @ql_proto_ver: Version of QLINK protocol used by firmware.
- * @country_code: country code ID firmware is configured to.
  * @num_mac: Number of separate physical radio devices provided by hardware.
  * @mac_bitmap: Bitmap of MAC IDs that are active and can be used in firmware.
  * @total_tx_chains: total number of transmit chains used by device.
  * @total_rx_chains: total number of receive chains.
+ * @alpha2: country code ID firmware is configured to.
+ * @n_reg_rules: number of regulatory rules TLVs in variable portion of the
+ *	message.
+ * @dfs_region: regulatory DFS region, one of @enum qlink_dfs_region.
+ * @info: variable-length HW info, can contain QTN_TLV_ID_REG_RULE.
  */
 struct qlink_resp_get_hw_info {
 	struct qlink_resp rhdr;
 	__le32 fw_ver;
 	__le32 hw_capab;
 	__le16 ql_proto_ver;
-	u8 alpha2_code[2];
 	u8 num_mac;
 	u8 mac_bitmap;
 	u8 total_tx_chain;
 	u8 total_rx_chain;
+	u8 alpha2[2];
+	u8 n_reg_rules;
+	u8 dfs_region;
+	u8 info[0];
 } __packed;
 
 /**
@@ -741,6 +802,7 @@ enum qlink_tlv_id {
 	QTN_TLV_ID_LRETRY_LIMIT		= 0x0204,
 	QTN_TLV_ID_BCN_PERIOD		= 0x0205,
 	QTN_TLV_ID_DTIM			= 0x0206,
+	QTN_TLV_ID_REG_RULE		= 0x0207,
 	QTN_TLV_ID_CHANNEL		= 0x020F,
 	QTN_TLV_ID_COVERAGE_CLASS	= 0x0213,
 	QTN_TLV_ID_IFACE_LIMIT		= 0x0214,
@@ -844,12 +906,54 @@ struct qlink_tlv_cclass {
 	u8 cclass;
 } __packed;
 
-enum qlink_dfs_state {
-	QLINK_DFS_USABLE,
-	QLINK_DFS_UNAVAILABLE,
-	QLINK_DFS_AVAILABLE,
+/**
+ * enum qlink_reg_rule_flags - regulatory rule flags
+ *
+ * See description of &enum nl80211_reg_rule_flags
+ */
+enum qlink_reg_rule_flags {
+	QLINK_RRF_NO_OFDM	= BIT(0),
+	QLINK_RRF_NO_CCK	= BIT(1),
+	QLINK_RRF_NO_INDOOR	= BIT(2),
+	QLINK_RRF_NO_OUTDOOR	= BIT(3),
+	QLINK_RRF_DFS		= BIT(4),
+	QLINK_RRF_PTP_ONLY	= BIT(5),
+	QLINK_RRF_PTMP_ONLY	= BIT(6),
+	QLINK_RRF_NO_IR		= BIT(7),
+	QLINK_RRF_AUTO_BW	= BIT(8),
+	QLINK_RRF_IR_CONCURRENT	= BIT(9),
+	QLINK_RRF_NO_HT40MINUS	= BIT(10),
+	QLINK_RRF_NO_HT40PLUS	= BIT(11),
+	QLINK_RRF_NO_80MHZ	= BIT(12),
+	QLINK_RRF_NO_160MHZ	= BIT(13),
 };
 
+/**
+ * struct qlink_tlv_reg_rule - data for QTN_TLV_ID_REG_RULE TLV
+ *
+ * Regulatory rule description.
+ *
+ * @start_freq_khz: start frequency of the range the rule is attributed to.
+ * @end_freq_khz: end frequency of the range the rule is attributed to.
+ * @max_bandwidth_khz: max bandwidth that channels in specified range can be
+ *	configured to.
+ * @max_antenna_gain: max antenna gain that can be used in the specified
+ *	frequency range, dBi.
+ * @max_eirp: maximum EIRP.
+ * @flags: regulatory rule flags in &enum qlink_reg_rule_flags.
+ * @dfs_cac_ms: DFS CAC period.
+ */
+struct qlink_tlv_reg_rule {
+	struct qlink_tlv_hdr hdr;
+	__le32 start_freq_khz;
+	__le32 end_freq_khz;
+	__le32 max_bandwidth_khz;
+	__le32 max_antenna_gain;
+	__le32 max_eirp;
+	__le32 flags;
+	__le32 dfs_cac_ms;
+} __packed;
+
 enum qlink_channel_flags {
 	QLINK_CHAN_DISABLED		= BIT(0),
 	QLINK_CHAN_NO_IR		= BIT(1),
@@ -865,6 +969,12 @@ enum qlink_channel_flags {
 	QLINK_CHAN_NO_10MHZ		= BIT(12),
 };
 
+enum qlink_dfs_state {
+	QLINK_DFS_USABLE,
+	QLINK_DFS_UNAVAILABLE,
+	QLINK_DFS_AVAILABLE,
+};
+
 struct qlink_tlv_channel {
 	struct qlink_tlv_hdr hdr;
 	__le16 hw_value;