rtw88: Enable 802.11ac beamformee support

Enable MU-MIMO transmit beamformee support for chipset 8822b and 8822c.

If the driver is in station mode and associated with an AP, and the
capabilities of both meet the requirement of beamforming, driver will
run as a beamformee and the corresponding chip settings will be set.

In addition, module parameter support_bf is added to enable or disable
beamforming. Sometimes driver will need to disable for inter-operate
issues, and it would be easier for driver to debug.

Signed-off-by: Tzu-En Huang <tehuang@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

1 files changed, 46 insertions, 0 deletions

diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822b.c b/drivers/net/wireless/realtek/rtw88/rtw8822b.c
index 34fbfe6b4a11..87a9178ba022 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822b.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822b.c
@@ -13,6 +13,7 @@
 #include "mac.h"
 #include "reg.h"
 #include "debug.h"
+#include "bf.h"
 
 static void rtw8822b_config_trx_mode(struct rtw_dev *rtwdev, u8 tx_path,
 				     u8 rx_path, bool is_tx2_path);
@@ -120,6 +121,13 @@ static void rtw8822b_pwrtrack_init(struct rtw_dev *rtwdev)
 	dm_info->thermal_meter_k = rtwdev->efuse.thermal_meter_k;
 }
 
+static void rtw8822b_phy_bf_init(struct rtw_dev *rtwdev)
+{
+	rtw_bf_phy_init(rtwdev);
+	/* Grouping bitmap parameters */
+	rtw_write32(rtwdev, 0x1C94, 0xAFFFAFFF);
+}
+
 static void rtw8822b_phy_set_param(struct rtw_dev *rtwdev)
 {
 	struct rtw_hal *hal = &rtwdev->hal;
@@ -152,6 +160,8 @@ static void rtw8822b_phy_set_param(struct rtw_dev *rtwdev)
 
 	rtw8822b_phy_rfe_init(rtwdev);
 	rtw8822b_pwrtrack_init(rtwdev);
+
+	rtw8822b_phy_bf_init(rtwdev);
 }
 
 #define WLAN_SLOT_TIME		0x09
@@ -1456,6 +1466,37 @@ void rtw8822b_pwr_track(struct rtw_dev *rtwdev)
 	dm_info->pwr_trk_triggered = false;
 }
 
+static void rtw8822b_bf_config_bfee_su(struct rtw_dev *rtwdev,
+				       struct rtw_vif *vif,
+				       struct rtw_bfee *bfee, bool enable)
+{
+	if (enable)
+		rtw_bf_enable_bfee_su(rtwdev, vif, bfee);
+	else
+		rtw_bf_remove_bfee_su(rtwdev, bfee);
+}
+
+static void rtw8822b_bf_config_bfee_mu(struct rtw_dev *rtwdev,
+				       struct rtw_vif *vif,
+				       struct rtw_bfee *bfee, bool enable)
+{
+	if (enable)
+		rtw_bf_enable_bfee_mu(rtwdev, vif, bfee);
+	else
+		rtw_bf_remove_bfee_mu(rtwdev, bfee);
+}
+
+static void rtw8822b_bf_config_bfee(struct rtw_dev *rtwdev, struct rtw_vif *vif,
+				    struct rtw_bfee *bfee, bool enable)
+{
+	if (bfee->role == RTW_BFEE_SU)
+		rtw8822b_bf_config_bfee_su(rtwdev, vif, bfee, enable);
+	else if (bfee->role == RTW_BFEE_MU)
+		rtw8822b_bf_config_bfee_mu(rtwdev, vif, bfee, enable);
+	else
+		rtw_warn(rtwdev, "wrong bfee role\n");
+}
+
 static struct rtw_pwr_seq_cmd trans_carddis_to_cardemu_8822b[] = {
 	{0x0086,
 	 RTW_PWR_CUT_ALL_MSK,
@@ -2003,6 +2044,9 @@ static struct rtw_chip_ops rtw8822b_ops = {
 	.false_alarm_statistics	= rtw8822b_false_alarm_statistics,
 	.phy_calibration	= rtw8822b_phy_calibration,
 	.pwr_track		= rtw8822b_pwr_track,
+	.config_bfee		= rtw8822b_bf_config_bfee,
+	.set_gid_table		= rtw_bf_set_gid_table,
+	.cfg_csi_rate		= rtw_bf_cfg_csi_rate,
 
 	.coex_set_init		= rtw8822b_coex_cfg_init,
 	.coex_set_ant_switch	= rtw8822b_coex_cfg_ant_switch,
@@ -2320,6 +2364,8 @@ struct rtw_chip_info rtw8822b_hw_spec = {
 	.rfe_defs_size = ARRAY_SIZE(rtw8822b_rfe_defs),
 	.pwr_track_tbl = &rtw8822b_rtw_pwr_track_tbl,
 	.iqk_threshold = 8,
+	.bfer_su_max_num = 2,
+	.bfer_mu_max_num = 1,
 
 	.coex_para_ver = 0x19062706,
 	.bt_desired_ver = 0x6,