rt2x00: move under ralink vendor directory

Part of reorganising wireless drivers directory and Kconfig.

Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

1 files changed, 0 insertions, 1079 deletions

diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h
deleted file mode 100644
index 4a4f235466d1..000000000000
--- a/drivers/net/wireless/rt2x00/rt73usb.h
+++ /dev/null
@@ -1,1079 +0,0 @@
-/*
-	Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
-	<http://rt2x00.serialmonkey.com>
-
-	This program is free software; you can redistribute it and/or modify
-	it under the terms of the GNU General Public License as published by
-	the Free Software Foundation; either version 2 of the License, or
-	(at your option) any later version.
-
-	This program is distributed in the hope that it will be useful,
-	but WITHOUT ANY WARRANTY; without even the implied warranty of
-	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-	GNU General Public License for more details.
-
-	You should have received a copy of the GNU General Public License
-	along with this program; if not, see <http://www.gnu.org/licenses/>.
- */
-
-/*
-	Module: rt73usb
-	Abstract: Data structures and registers for the rt73usb module.
-	Supported chipsets: rt2571W & rt2671.
- */
-
-#ifndef RT73USB_H
-#define RT73USB_H
-
-/*
- * RF chip defines.
- */
-#define RF5226				0x0001
-#define RF2528				0x0002
-#define RF5225				0x0003
-#define RF2527				0x0004
-
-/*
- * Signal information.
- * Default offset is required for RSSI <-> dBm conversion.
- */
-#define DEFAULT_RSSI_OFFSET		120
-
-/*
- * Register layout information.
- */
-#define CSR_REG_BASE			0x3000
-#define CSR_REG_SIZE			0x04b0
-#define EEPROM_BASE			0x0000
-#define EEPROM_SIZE			0x0100
-#define BBP_BASE			0x0000
-#define BBP_SIZE			0x0080
-#define RF_BASE				0x0004
-#define RF_SIZE				0x0010
-
-/*
- * Number of TX queues.
- */
-#define NUM_TX_QUEUES			4
-
-/*
- * USB registers.
- */
-
-/*
- * MCU_LEDCS: LED control for MCU Mailbox.
- */
-#define MCU_LEDCS_LED_MODE		FIELD16(0x001f)
-#define MCU_LEDCS_RADIO_STATUS		FIELD16(0x0020)
-#define MCU_LEDCS_LINK_BG_STATUS	FIELD16(0x0040)
-#define MCU_LEDCS_LINK_A_STATUS		FIELD16(0x0080)
-#define MCU_LEDCS_POLARITY_GPIO_0	FIELD16(0x0100)
-#define MCU_LEDCS_POLARITY_GPIO_1	FIELD16(0x0200)
-#define MCU_LEDCS_POLARITY_GPIO_2	FIELD16(0x0400)
-#define MCU_LEDCS_POLARITY_GPIO_3	FIELD16(0x0800)
-#define MCU_LEDCS_POLARITY_GPIO_4	FIELD16(0x1000)
-#define MCU_LEDCS_POLARITY_ACT		FIELD16(0x2000)
-#define MCU_LEDCS_POLARITY_READY_BG	FIELD16(0x4000)
-#define MCU_LEDCS_POLARITY_READY_A	FIELD16(0x8000)
-
-/*
- * 8051 firmware image.
- */
-#define FIRMWARE_RT2571			"rt73.bin"
-#define FIRMWARE_IMAGE_BASE		0x0800
-
-/*
- * Security key table memory.
- * 16 entries 32-byte for shared key table
- * 64 entries 32-byte for pairwise key table
- * 64 entries 8-byte for pairwise ta key table
- */
-#define SHARED_KEY_TABLE_BASE		0x1000
-#define PAIRWISE_KEY_TABLE_BASE		0x1200
-#define PAIRWISE_TA_TABLE_BASE		0x1a00
-
-#define SHARED_KEY_ENTRY(__idx) \
-	( SHARED_KEY_TABLE_BASE + \
-		((__idx) * sizeof(struct hw_key_entry)) )
-#define PAIRWISE_KEY_ENTRY(__idx) \
-	( PAIRWISE_KEY_TABLE_BASE + \
-		((__idx) * sizeof(struct hw_key_entry)) )
-#define PAIRWISE_TA_ENTRY(__idx) \
-	( PAIRWISE_TA_TABLE_BASE + \
-		((__idx) * sizeof(struct hw_pairwise_ta_entry)) )
-
-struct hw_key_entry {
-	u8 key[16];
-	u8 tx_mic[8];
-	u8 rx_mic[8];
-} __packed;
-
-struct hw_pairwise_ta_entry {
-	u8 address[6];
-	u8 cipher;
-	u8 reserved;
-} __packed;
-
-/*
- * Since NULL frame won't be that long (256 byte),
- * We steal 16 tail bytes to save debugging settings.
- */
-#define HW_DEBUG_SETTING_BASE		0x2bf0
-
-/*
- * On-chip BEACON frame space.
- */
-#define HW_BEACON_BASE0			0x2400
-#define HW_BEACON_BASE1			0x2500
-#define HW_BEACON_BASE2			0x2600
-#define HW_BEACON_BASE3			0x2700
-
-#define HW_BEACON_OFFSET(__index) \
-	( HW_BEACON_BASE0 + (__index * 0x0100) )
-
-/*
- * MAC Control/Status Registers(CSR).
- * Some values are set in TU, whereas 1 TU == 1024 us.
- */
-
-/*
- * MAC_CSR0: ASIC revision number.
- */
-#define MAC_CSR0			0x3000
-#define MAC_CSR0_REVISION		FIELD32(0x0000000f)
-#define MAC_CSR0_CHIPSET		FIELD32(0x000ffff0)
-
-/*
- * MAC_CSR1: System control register.
- * SOFT_RESET: Software reset bit, 1: reset, 0: normal.
- * BBP_RESET: Hardware reset BBP.
- * HOST_READY: Host is ready after initialization, 1: ready.
- */
-#define MAC_CSR1			0x3004
-#define MAC_CSR1_SOFT_RESET		FIELD32(0x00000001)
-#define MAC_CSR1_BBP_RESET		FIELD32(0x00000002)
-#define MAC_CSR1_HOST_READY		FIELD32(0x00000004)
-
-/*
- * MAC_CSR2: STA MAC register 0.
- */
-#define MAC_CSR2			0x3008
-#define MAC_CSR2_BYTE0			FIELD32(0x000000ff)
-#define MAC_CSR2_BYTE1			FIELD32(0x0000ff00)
-#define MAC_CSR2_BYTE2			FIELD32(0x00ff0000)
-#define MAC_CSR2_BYTE3			FIELD32(0xff000000)
-
-/*
- * MAC_CSR3: STA MAC register 1.
- * UNICAST_TO_ME_MASK:
- *	Used to mask off bits from byte 5 of the MAC address
- *	to determine the UNICAST_TO_ME bit for RX frames.
- *	The full mask is complemented by BSS_ID_MASK:
- *		MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK
- */
-#define MAC_CSR3			0x300c
-#define MAC_CSR3_BYTE4			FIELD32(0x000000ff)
-#define MAC_CSR3_BYTE5			FIELD32(0x0000ff00)
-#define MAC_CSR3_UNICAST_TO_ME_MASK	FIELD32(0x00ff0000)
-
-/*
- * MAC_CSR4: BSSID register 0.
- */
-#define MAC_CSR4			0x3010
-#define MAC_CSR4_BYTE0			FIELD32(0x000000ff)
-#define MAC_CSR4_BYTE1			FIELD32(0x0000ff00)
-#define MAC_CSR4_BYTE2			FIELD32(0x00ff0000)
-#define MAC_CSR4_BYTE3			FIELD32(0xff000000)
-
-/*
- * MAC_CSR5: BSSID register 1.
- * BSS_ID_MASK:
- *	This mask is used to mask off bits 0 and 1 of byte 5 of the
- *	BSSID. This will make sure that those bits will be ignored
- *	when determining the MY_BSS of RX frames.
- *		0: 1-BSSID mode (BSS index = 0)
- *		1: 2-BSSID mode (BSS index: Byte5, bit 0)
- *		2: 2-BSSID mode (BSS index: byte5, bit 1)
- *		3: 4-BSSID mode (BSS index: byte5, bit 0 - 1)
- */
-#define MAC_CSR5			0x3014
-#define MAC_CSR5_BYTE4			FIELD32(0x000000ff)
-#define MAC_CSR5_BYTE5			FIELD32(0x0000ff00)
-#define MAC_CSR5_BSS_ID_MASK		FIELD32(0x00ff0000)
-
-/*
- * MAC_CSR6: Maximum frame length register.
- */
-#define MAC_CSR6			0x3018
-#define MAC_CSR6_MAX_FRAME_UNIT		FIELD32(0x00000fff)
-
-/*
- * MAC_CSR7: Reserved
- */
-#define MAC_CSR7			0x301c
-
-/*
- * MAC_CSR8: SIFS/EIFS register.
- * All units are in US.
- */
-#define MAC_CSR8			0x3020
-#define MAC_CSR8_SIFS			FIELD32(0x000000ff)
-#define MAC_CSR8_SIFS_AFTER_RX_OFDM	FIELD32(0x0000ff00)
-#define MAC_CSR8_EIFS			FIELD32(0xffff0000)
-
-/*
- * MAC_CSR9: Back-Off control register.
- * SLOT_TIME: Slot time, default is 20us for 802.11BG.
- * CWMIN: Bit for Cwmin. default Cwmin is 31 (2^5 - 1).
- * CWMAX: Bit for Cwmax, default Cwmax is 1023 (2^10 - 1).
- * CW_SELECT: 1: CWmin/Cwmax select from register, 0:select from TxD.
- */
-#define MAC_CSR9			0x3024
-#define MAC_CSR9_SLOT_TIME		FIELD32(0x000000ff)
-#define MAC_CSR9_CWMIN			FIELD32(0x00000f00)
-#define MAC_CSR9_CWMAX			FIELD32(0x0000f000)
-#define MAC_CSR9_CW_SELECT		FIELD32(0x00010000)
-
-/*
- * MAC_CSR10: Power state configuration.
- */
-#define MAC_CSR10			0x3028
-
-/*
- * MAC_CSR11: Power saving transition time register.
- * DELAY_AFTER_TBCN: Delay after Tbcn expired in units of TU.
- * TBCN_BEFORE_WAKEUP: Number of beacon before wakeup.
- * WAKEUP_LATENCY: In unit of TU.
- */
-#define MAC_CSR11			0x302c
-#define MAC_CSR11_DELAY_AFTER_TBCN	FIELD32(0x000000ff)
-#define MAC_CSR11_TBCN_BEFORE_WAKEUP	FIELD32(0x00007f00)
-#define MAC_CSR11_AUTOWAKE		FIELD32(0x00008000)
-#define MAC_CSR11_WAKEUP_LATENCY	FIELD32(0x000f0000)
-
-/*
- * MAC_CSR12: Manual power control / status register (merge CSR20 & PWRCSR1).
- * CURRENT_STATE: 0:sleep, 1:awake.
- * FORCE_WAKEUP: This has higher priority than PUT_TO_SLEEP.
- * BBP_CURRENT_STATE: 0: BBP sleep, 1: BBP awake.
- */
-#define MAC_CSR12			0x3030
-#define MAC_CSR12_CURRENT_STATE		FIELD32(0x00000001)
-#define MAC_CSR12_PUT_TO_SLEEP		FIELD32(0x00000002)
-#define MAC_CSR12_FORCE_WAKEUP		FIELD32(0x00000004)
-#define MAC_CSR12_BBP_CURRENT_STATE	FIELD32(0x00000008)
-
-/*
- * MAC_CSR13: GPIO.
- *	MAC_CSR13_VALx: GPIO value
- *	MAC_CSR13_DIRx: GPIO direction: 0 = input; 1 = output
- */
-#define MAC_CSR13			0x3034
-#define MAC_CSR13_VAL0			FIELD32(0x00000001)
-#define MAC_CSR13_VAL1			FIELD32(0x00000002)
-#define MAC_CSR13_VAL2			FIELD32(0x00000004)
-#define MAC_CSR13_VAL3			FIELD32(0x00000008)
-#define MAC_CSR13_VAL4			FIELD32(0x00000010)
-#define MAC_CSR13_VAL5			FIELD32(0x00000020)
-#define MAC_CSR13_VAL6			FIELD32(0x00000040)
-#define MAC_CSR13_VAL7			FIELD32(0x00000080)
-#define MAC_CSR13_DIR0			FIELD32(0x00000100)
-#define MAC_CSR13_DIR1			FIELD32(0x00000200)
-#define MAC_CSR13_DIR2			FIELD32(0x00000400)
-#define MAC_CSR13_DIR3			FIELD32(0x00000800)
-#define MAC_CSR13_DIR4			FIELD32(0x00001000)
-#define MAC_CSR13_DIR5			FIELD32(0x00002000)
-#define MAC_CSR13_DIR6			FIELD32(0x00004000)
-#define MAC_CSR13_DIR7			FIELD32(0x00008000)
-
-/*
- * MAC_CSR14: LED control register.
- * ON_PERIOD: On period, default 70ms.
- * OFF_PERIOD: Off period, default 30ms.
- * HW_LED: HW TX activity, 1: normal OFF, 0: normal ON.
- * SW_LED: s/w LED, 1: ON, 0: OFF.
- * HW_LED_POLARITY: 0: active low, 1: active high.
- */
-#define MAC_CSR14			0x3038
-#define MAC_CSR14_ON_PERIOD		FIELD32(0x000000ff)
-#define MAC_CSR14_OFF_PERIOD		FIELD32(0x0000ff00)
-#define MAC_CSR14_HW_LED		FIELD32(0x00010000)
-#define MAC_CSR14_SW_LED		FIELD32(0x00020000)
-#define MAC_CSR14_HW_LED_POLARITY	FIELD32(0x00040000)
-#define MAC_CSR14_SW_LED2		FIELD32(0x00080000)
-
-/*
- * MAC_CSR15: NAV control.
- */
-#define MAC_CSR15			0x303c
-
-/*
- * TXRX control registers.
- * Some values are set in TU, whereas 1 TU == 1024 us.
- */
-
-/*
- * TXRX_CSR0: TX/RX configuration register.
- * TSF_OFFSET: Default is 24.
- * AUTO_TX_SEQ: 1: ASIC auto replace sequence nr in outgoing frame.
- * DISABLE_RX: Disable Rx engine.
- * DROP_CRC: Drop CRC error.
- * DROP_PHYSICAL: Drop physical error.
- * DROP_CONTROL: Drop control frame.
- * DROP_NOT_TO_ME: Drop not to me unicast frame.
- * DROP_TO_DS: Drop fram ToDs bit is true.
- * DROP_VERSION_ERROR: Drop version error frame.
- * DROP_MULTICAST: Drop multicast frames.
- * DROP_BORADCAST: Drop broadcast frames.
- * DROP_ACK_CTS: Drop received ACK and CTS.
- */
-#define TXRX_CSR0			0x3040
-#define TXRX_CSR0_RX_ACK_TIMEOUT	FIELD32(0x000001ff)
-#define TXRX_CSR0_TSF_OFFSET		FIELD32(0x00007e00)
-#define TXRX_CSR0_AUTO_TX_SEQ		FIELD32(0x00008000)
-#define TXRX_CSR0_DISABLE_RX		FIELD32(0x00010000)
-#define TXRX_CSR0_DROP_CRC		FIELD32(0x00020000)
-#define TXRX_CSR0_DROP_PHYSICAL		FIELD32(0x00040000)
-#define TXRX_CSR0_DROP_CONTROL		FIELD32(0x00080000)
-#define TXRX_CSR0_DROP_NOT_TO_ME	FIELD32(0x00100000)
-#define TXRX_CSR0_DROP_TO_DS		FIELD32(0x00200000)
-#define TXRX_CSR0_DROP_VERSION_ERROR	FIELD32(0x00400000)
-#define TXRX_CSR0_DROP_MULTICAST	FIELD32(0x00800000)
-#define TXRX_CSR0_DROP_BROADCAST	FIELD32(0x01000000)
-#define TXRX_CSR0_DROP_ACK_CTS		FIELD32(0x02000000)
-#define TXRX_CSR0_TX_WITHOUT_WAITING	FIELD32(0x04000000)
-
-/*
- * TXRX_CSR1
- */
-#define TXRX_CSR1			0x3044
-#define TXRX_CSR1_BBP_ID0		FIELD32(0x0000007f)
-#define TXRX_CSR1_BBP_ID0_VALID		FIELD32(0x00000080)
-#define TXRX_CSR1_BBP_ID1		FIELD32(0x00007f00)
-#define TXRX_CSR1_BBP_ID1_VALID		FIELD32(0x00008000)
-#define TXRX_CSR1_BBP_ID2		FIELD32(0x007f0000)
-#define TXRX_CSR1_BBP_ID2_VALID		FIELD32(0x00800000)
-#define TXRX_CSR1_BBP_ID3		FIELD32(0x7f000000)
-#define TXRX_CSR1_BBP_ID3_VALID		FIELD32(0x80000000)
-
-/*
- * TXRX_CSR2
- */
-#define TXRX_CSR2			0x3048
-#define TXRX_CSR2_BBP_ID0		FIELD32(0x0000007f)
-#define TXRX_CSR2_BBP_ID0_VALID		FIELD32(0x00000080)
-#define TXRX_CSR2_BBP_ID1		FIELD32(0x00007f00)
-#define TXRX_CSR2_BBP_ID1_VALID		FIELD32(0x00008000)
-#define TXRX_CSR2_BBP_ID2		FIELD32(0x007f0000)
-#define TXRX_CSR2_BBP_ID2_VALID		FIELD32(0x00800000)
-#define TXRX_CSR2_BBP_ID3		FIELD32(0x7f000000)
-#define TXRX_CSR2_BBP_ID3_VALID		FIELD32(0x80000000)
-
-/*
- * TXRX_CSR3
- */
-#define TXRX_CSR3			0x304c
-#define TXRX_CSR3_BBP_ID0		FIELD32(0x0000007f)
-#define TXRX_CSR3_BBP_ID0_VALID		FIELD32(0x00000080)
-#define TXRX_CSR3_BBP_ID1		FIELD32(0x00007f00)
-#define TXRX_CSR3_BBP_ID1_VALID		FIELD32(0x00008000)
-#define TXRX_CSR3_BBP_ID2		FIELD32(0x007f0000)
-#define TXRX_CSR3_BBP_ID2_VALID		FIELD32(0x00800000)
-#define TXRX_CSR3_BBP_ID3		FIELD32(0x7f000000)
-#define TXRX_CSR3_BBP_ID3_VALID		FIELD32(0x80000000)
-
-/*
- * TXRX_CSR4: Auto-Responder/Tx-retry register.
- * AUTORESPOND_PREAMBLE: 0:long, 1:short preamble.
- * OFDM_TX_RATE_DOWN: 1:enable.
- * OFDM_TX_RATE_STEP: 0:1-step, 1: 2-step, 2:3-step, 3:4-step.
- * OFDM_TX_FALLBACK_CCK: 0: Fallback to OFDM 6M only, 1: Fallback to CCK 1M,2M.
- */
-#define TXRX_CSR4			0x3050
-#define TXRX_CSR4_TX_ACK_TIMEOUT	FIELD32(0x000000ff)
-#define TXRX_CSR4_CNTL_ACK_POLICY	FIELD32(0x00000700)
-#define TXRX_CSR4_ACK_CTS_PSM		FIELD32(0x00010000)
-#define TXRX_CSR4_AUTORESPOND_ENABLE	FIELD32(0x00020000)
-#define TXRX_CSR4_AUTORESPOND_PREAMBLE	FIELD32(0x00040000)
-#define TXRX_CSR4_OFDM_TX_RATE_DOWN	FIELD32(0x00080000)
-#define TXRX_CSR4_OFDM_TX_RATE_STEP	FIELD32(0x00300000)
-#define TXRX_CSR4_OFDM_TX_FALLBACK_CCK	FIELD32(0x00400000)
-#define TXRX_CSR4_LONG_RETRY_LIMIT	FIELD32(0x0f000000)
-#define TXRX_CSR4_SHORT_RETRY_LIMIT	FIELD32(0xf0000000)
-
-/*
- * TXRX_CSR5
- */
-#define TXRX_CSR5			0x3054
-
-/*
- * TXRX_CSR6: ACK/CTS payload consumed time
- */
-#define TXRX_CSR6			0x3058
-
-/*
- * TXRX_CSR7: OFDM ACK/CTS payload consumed time for 6/9/12/18 mbps.
- */
-#define TXRX_CSR7			0x305c
-#define TXRX_CSR7_ACK_CTS_6MBS		FIELD32(0x000000ff)
-#define TXRX_CSR7_ACK_CTS_9MBS		FIELD32(0x0000ff00)
-#define TXRX_CSR7_ACK_CTS_12MBS		FIELD32(0x00ff0000)
-#define TXRX_CSR7_ACK_CTS_18MBS		FIELD32(0xff000000)
-
-/*
- * TXRX_CSR8: OFDM ACK/CTS payload consumed time for 24/36/48/54 mbps.
- */
-#define TXRX_CSR8			0x3060
-#define TXRX_CSR8_ACK_CTS_24MBS		FIELD32(0x000000ff)
-#define TXRX_CSR8_ACK_CTS_36MBS		FIELD32(0x0000ff00)
-#define TXRX_CSR8_ACK_CTS_48MBS		FIELD32(0x00ff0000)
-#define TXRX_CSR8_ACK_CTS_54MBS		FIELD32(0xff000000)
-
-/*
- * TXRX_CSR9: Synchronization control register.
- * BEACON_INTERVAL: In unit of 1/16 TU.
- * TSF_TICKING: Enable TSF auto counting.
- * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode.
- * BEACON_GEN: Enable beacon generator.
- */
-#define TXRX_CSR9			0x3064
-#define TXRX_CSR9_BEACON_INTERVAL	FIELD32(0x0000ffff)
-#define TXRX_CSR9_TSF_TICKING		FIELD32(0x00010000)
-#define TXRX_CSR9_TSF_SYNC		FIELD32(0x00060000)
-#define TXRX_CSR9_TBTT_ENABLE		FIELD32(0x00080000)
-#define TXRX_CSR9_BEACON_GEN		FIELD32(0x00100000)
-#define TXRX_CSR9_TIMESTAMP_COMPENSATE	FIELD32(0xff000000)
-
-/*
- * TXRX_CSR10: BEACON alignment.
- */
-#define TXRX_CSR10			0x3068
-
-/*
- * TXRX_CSR11: AES mask.
- */
-#define TXRX_CSR11			0x306c
-
-/*
- * TXRX_CSR12: TSF low 32.
- */
-#define TXRX_CSR12			0x3070
-#define TXRX_CSR12_LOW_TSFTIMER		FIELD32(0xffffffff)
-
-/*
- * TXRX_CSR13: TSF high 32.
- */
-#define TXRX_CSR13			0x3074
-#define TXRX_CSR13_HIGH_TSFTIMER	FIELD32(0xffffffff)
-
-/*
- * TXRX_CSR14: TBTT timer.
- */
-#define TXRX_CSR14			0x3078
-
-/*
- * TXRX_CSR15: TKIP MIC priority byte "AND" mask.
- */
-#define TXRX_CSR15			0x307c
-
-/*
- * PHY control registers.
- * Some values are set in TU, whereas 1 TU == 1024 us.
- */
-
-/*
- * PHY_CSR0: RF/PS control.
- */
-#define PHY_CSR0			0x3080
-#define PHY_CSR0_PA_PE_BG		FIELD32(0x00010000)
-#define PHY_CSR0_PA_PE_A		FIELD32(0x00020000)
-
-/*
- * PHY_CSR1
- */
-#define PHY_CSR1			0x3084
-#define PHY_CSR1_RF_RPI			FIELD32(0x00010000)
-
-/*
- * PHY_CSR2: Pre-TX BBP control.
- */
-#define PHY_CSR2			0x3088
-
-/*
- * PHY_CSR3: BBP serial control register.
- * VALUE: Register value to program into BBP.
- * REG_NUM: Selected BBP register.
- * READ_CONTROL: 0: Write BBP, 1: Read BBP.
- * BUSY: 1: ASIC is busy execute BBP programming.
- */
-#define PHY_CSR3			0x308c
-#define PHY_CSR3_VALUE			FIELD32(0x000000ff)
-#define PHY_CSR3_REGNUM			FIELD32(0x00007f00)
-#define PHY_CSR3_READ_CONTROL		FIELD32(0x00008000)
-#define PHY_CSR3_BUSY			FIELD32(0x00010000)
-
-/*
- * PHY_CSR4: RF serial control register
- * VALUE: Register value (include register id) serial out to RF/IF chip.
- * NUMBER_OF_BITS: Number of bits used in RFRegValue (I:20, RFMD:22).
- * IF_SELECT: 1: select IF to program, 0: select RF to program.
- * PLL_LD: RF PLL_LD status.
- * BUSY: 1: ASIC is busy execute RF programming.
- */
-#define PHY_CSR4			0x3090
-#define PHY_CSR4_VALUE			FIELD32(0x00ffffff)
-#define PHY_CSR4_NUMBER_OF_BITS		FIELD32(0x1f000000)
-#define PHY_CSR4_IF_SELECT		FIELD32(0x20000000)
-#define PHY_CSR4_PLL_LD			FIELD32(0x40000000)
-#define PHY_CSR4_BUSY			FIELD32(0x80000000)
-
-/*
- * PHY_CSR5: RX to TX signal switch timing control.
- */
-#define PHY_CSR5			0x3094
-#define PHY_CSR5_IQ_FLIP		FIELD32(0x00000004)
-
-/*
- * PHY_CSR6: TX to RX signal timing control.
- */
-#define PHY_CSR6			0x3098
-#define PHY_CSR6_IQ_FLIP		FIELD32(0x00000004)
-
-/*
- * PHY_CSR7: TX DAC switching timing control.
- */
-#define PHY_CSR7			0x309c
-
-/*
- * Security control register.
- */
-
-/*
- * SEC_CSR0: Shared key table control.
- */
-#define SEC_CSR0			0x30a0
-#define SEC_CSR0_BSS0_KEY0_VALID	FIELD32(0x00000001)
-#define SEC_CSR0_BSS0_KEY1_VALID	FIELD32(0x00000002)
-#define SEC_CSR0_BSS0_KEY2_VALID	FIELD32(0x00000004)
-#define SEC_CSR0_BSS0_KEY3_VALID	FIELD32(0x00000008)
-#define SEC_CSR0_BSS1_KEY0_VALID	FIELD32(0x00000010)
-#define SEC_CSR0_BSS1_KEY1_VALID	FIELD32(0x00000020)
-#define SEC_CSR0_BSS1_KEY2_VALID	FIELD32(0x00000040)
-#define SEC_CSR0_BSS1_KEY3_VALID	FIELD32(0x00000080)
-#define SEC_CSR0_BSS2_KEY0_VALID	FIELD32(0x00000100)
-#define SEC_CSR0_BSS2_KEY1_VALID	FIELD32(0x00000200)
-#define SEC_CSR0_BSS2_KEY2_VALID	FIELD32(0x00000400)
-#define SEC_CSR0_BSS2_KEY3_VALID	FIELD32(0x00000800)
-#define SEC_CSR0_BSS3_KEY0_VALID	FIELD32(0x00001000)
-#define SEC_CSR0_BSS3_KEY1_VALID	FIELD32(0x00002000)
-#define SEC_CSR0_BSS3_KEY2_VALID	FIELD32(0x00004000)
-#define SEC_CSR0_BSS3_KEY3_VALID	FIELD32(0x00008000)
-
-/*
- * SEC_CSR1: Shared key table security mode register.
- */
-#define SEC_CSR1			0x30a4
-#define SEC_CSR1_BSS0_KEY0_CIPHER_ALG	FIELD32(0x00000007)
-#define SEC_CSR1_BSS0_KEY1_CIPHER_ALG	FIELD32(0x00000070)
-#define SEC_CSR1_BSS0_KEY2_CIPHER_ALG	FIELD32(0x00000700)
-#define SEC_CSR1_BSS0_KEY3_CIPHER_ALG	FIELD32(0x00007000)
-#define SEC_CSR1_BSS1_KEY0_CIPHER_ALG	FIELD32(0x00070000)
-#define SEC_CSR1_BSS1_KEY1_CIPHER_ALG	FIELD32(0x00700000)
-#define SEC_CSR1_BSS1_KEY2_CIPHER_ALG	FIELD32(0x07000000)
-#define SEC_CSR1_BSS1_KEY3_CIPHER_ALG	FIELD32(0x70000000)
-
-/*
- * Pairwise key table valid bitmap registers.
- * SEC_CSR2: pairwise key table valid bitmap 0.
- * SEC_CSR3: pairwise key table valid bitmap 1.
- */
-#define SEC_CSR2			0x30a8
-#define SEC_CSR3			0x30ac
-
-/*
- * SEC_CSR4: Pairwise key table lookup control.
- */
-#define SEC_CSR4			0x30b0
-#define SEC_CSR4_ENABLE_BSS0		FIELD32(0x00000001)
-#define SEC_CSR4_ENABLE_BSS1		FIELD32(0x00000002)
-#define SEC_CSR4_ENABLE_BSS2		FIELD32(0x00000004)
-#define SEC_CSR4_ENABLE_BSS3		FIELD32(0x00000008)
-
-/*
- * SEC_CSR5: shared key table security mode register.
- */
-#define SEC_CSR5			0x30b4
-#define SEC_CSR5_BSS2_KEY0_CIPHER_ALG	FIELD32(0x00000007)
-#define SEC_CSR5_BSS2_KEY1_CIPHER_ALG	FIELD32(0x00000070)
-#define SEC_CSR5_BSS2_KEY2_CIPHER_ALG	FIELD32(0x00000700)
-#define SEC_CSR5_BSS2_KEY3_CIPHER_ALG	FIELD32(0x00007000)
-#define SEC_CSR5_BSS3_KEY0_CIPHER_ALG	FIELD32(0x00070000)
-#define SEC_CSR5_BSS3_KEY1_CIPHER_ALG	FIELD32(0x00700000)
-#define SEC_CSR5_BSS3_KEY2_CIPHER_ALG	FIELD32(0x07000000)
-#define SEC_CSR5_BSS3_KEY3_CIPHER_ALG	FIELD32(0x70000000)
-
-/*
- * STA control registers.
- */
-
-/*
- * STA_CSR0: RX PLCP error count & RX FCS error count.
- */
-#define STA_CSR0			0x30c0
-#define STA_CSR0_FCS_ERROR		FIELD32(0x0000ffff)
-#define STA_CSR0_PLCP_ERROR		FIELD32(0xffff0000)
-
-/*
- * STA_CSR1: RX False CCA count & RX LONG frame count.
- */
-#define STA_CSR1			0x30c4
-#define STA_CSR1_PHYSICAL_ERROR		FIELD32(0x0000ffff)
-#define STA_CSR1_FALSE_CCA_ERROR	FIELD32(0xffff0000)
-
-/*
- * STA_CSR2: TX Beacon count and RX FIFO overflow count.
- */
-#define STA_CSR2			0x30c8
-#define STA_CSR2_RX_FIFO_OVERFLOW_COUNT	FIELD32(0x0000ffff)
-#define STA_CSR2_RX_OVERFLOW_COUNT	FIELD32(0xffff0000)
-
-/*
- * STA_CSR3: TX Beacon count.
- */
-#define STA_CSR3			0x30cc
-#define STA_CSR3_TX_BEACON_COUNT	FIELD32(0x0000ffff)
-
-/*
- * STA_CSR4: TX Retry count.
- */
-#define STA_CSR4			0x30d0
-#define STA_CSR4_TX_NO_RETRY_COUNT	FIELD32(0x0000ffff)
-#define STA_CSR4_TX_ONE_RETRY_COUNT	FIELD32(0xffff0000)
-
-/*
- * STA_CSR5: TX Retry count.
- */
-#define STA_CSR5			0x30d4
-#define STA_CSR4_TX_MULTI_RETRY_COUNT	FIELD32(0x0000ffff)
-#define STA_CSR4_TX_RETRY_FAIL_COUNT	FIELD32(0xffff0000)
-
-/*
- * QOS control registers.
- */
-
-/*
- * QOS_CSR1: TXOP holder MAC address register.
- */
-#define QOS_CSR1			0x30e4
-#define QOS_CSR1_BYTE4			FIELD32(0x000000ff)
-#define QOS_CSR1_BYTE5			FIELD32(0x0000ff00)
-
-/*
- * QOS_CSR2: TXOP holder timeout register.
- */
-#define QOS_CSR2			0x30e8
-
-/*
- * RX QOS-CFPOLL MAC address register.
- * QOS_CSR3: RX QOS-CFPOLL MAC address 0.
- * QOS_CSR4: RX QOS-CFPOLL MAC address 1.
- */
-#define QOS_CSR3			0x30ec
-#define QOS_CSR4			0x30f0
-
-/*
- * QOS_CSR5: "QosControl" field of the RX QOS-CFPOLL.
- */
-#define QOS_CSR5			0x30f4
-
-/*
- * WMM Scheduler Register
- */
-
-/*
- * AIFSN_CSR: AIFSN for each EDCA AC.
- * AIFSN0: For AC_VO.
- * AIFSN1: For AC_VI.
- * AIFSN2: For AC_BE.
- * AIFSN3: For AC_BK.
- */
-#define AIFSN_CSR			0x0400
-#define AIFSN_CSR_AIFSN0		FIELD32(0x0000000f)
-#define AIFSN_CSR_AIFSN1		FIELD32(0x000000f0)
-#define AIFSN_CSR_AIFSN2		FIELD32(0x00000f00)
-#define AIFSN_CSR_AIFSN3		FIELD32(0x0000f000)
-
-/*
- * CWMIN_CSR: CWmin for each EDCA AC.
- * CWMIN0: For AC_VO.
- * CWMIN1: For AC_VI.
- * CWMIN2: For AC_BE.
- * CWMIN3: For AC_BK.
- */
-#define CWMIN_CSR			0x0404
-#define CWMIN_CSR_CWMIN0		FIELD32(0x0000000f)
-#define CWMIN_CSR_CWMIN1		FIELD32(0x000000f0)
-#define CWMIN_CSR_CWMIN2		FIELD32(0x00000f00)
-#define CWMIN_CSR_CWMIN3		FIELD32(0x0000f000)
-
-/*
- * CWMAX_CSR: CWmax for each EDCA AC.
- * CWMAX0: For AC_VO.
- * CWMAX1: For AC_VI.
- * CWMAX2: For AC_BE.
- * CWMAX3: For AC_BK.
- */
-#define CWMAX_CSR			0x0408
-#define CWMAX_CSR_CWMAX0		FIELD32(0x0000000f)
-#define CWMAX_CSR_CWMAX1		FIELD32(0x000000f0)
-#define CWMAX_CSR_CWMAX2		FIELD32(0x00000f00)
-#define CWMAX_CSR_CWMAX3		FIELD32(0x0000f000)
-
-/*
- * AC_TXOP_CSR0: AC_VO/AC_VI TXOP register.
- * AC0_TX_OP: For AC_VO, in unit of 32us.
- * AC1_TX_OP: For AC_VI, in unit of 32us.
- */
-#define AC_TXOP_CSR0			0x040c
-#define AC_TXOP_CSR0_AC0_TX_OP		FIELD32(0x0000ffff)
-#define AC_TXOP_CSR0_AC1_TX_OP		FIELD32(0xffff0000)
-
-/*
- * AC_TXOP_CSR1: AC_BE/AC_BK TXOP register.
- * AC2_TX_OP: For AC_BE, in unit of 32us.
- * AC3_TX_OP: For AC_BK, in unit of 32us.
- */
-#define AC_TXOP_CSR1			0x0410
-#define AC_TXOP_CSR1_AC2_TX_OP		FIELD32(0x0000ffff)
-#define AC_TXOP_CSR1_AC3_TX_OP		FIELD32(0xffff0000)
-
-/*
- * BBP registers.
- * The wordsize of the BBP is 8 bits.
- */
-
-/*
- * R2
- */
-#define BBP_R2_BG_MODE			FIELD8(0x20)
-
-/*
- * R3
- */
-#define BBP_R3_SMART_MODE		FIELD8(0x01)
-
-/*
- * R4: RX antenna control
- * FRAME_END: 1 - DPDT, 0 - SPDT (Only valid for 802.11G, RF2527 & RF2529)
- */
-
-/*
- * ANTENNA_CONTROL semantics (guessed):
- * 0x1: Software controlled antenna switching (fixed or SW diversity)
- * 0x2: Hardware diversity.
- */
-#define BBP_R4_RX_ANTENNA_CONTROL	FIELD8(0x03)
-#define BBP_R4_RX_FRAME_END		FIELD8(0x20)
-
-/*
- * R77
- */
-#define BBP_R77_RX_ANTENNA		FIELD8(0x03)
-
-/*
- * RF registers
- */
-
-/*
- * RF 3
- */
-#define RF3_TXPOWER			FIELD32(0x00003e00)
-
-/*
- * RF 4
- */
-#define RF4_FREQ_OFFSET			FIELD32(0x0003f000)
-
-/*
- * EEPROM content.
- * The wordsize of the EEPROM is 16 bits.
- */
-
-/*
- * HW MAC address.
- */
-#define EEPROM_MAC_ADDR_0		0x0002
-#define EEPROM_MAC_ADDR_BYTE0		FIELD16(0x00ff)
-#define EEPROM_MAC_ADDR_BYTE1		FIELD16(0xff00)
-#define EEPROM_MAC_ADDR1		0x0003
-#define EEPROM_MAC_ADDR_BYTE2		FIELD16(0x00ff)
-#define EEPROM_MAC_ADDR_BYTE3		FIELD16(0xff00)
-#define EEPROM_MAC_ADDR_2		0x0004
-#define EEPROM_MAC_ADDR_BYTE4		FIELD16(0x00ff)
-#define EEPROM_MAC_ADDR_BYTE5		FIELD16(0xff00)
-
-/*
- * EEPROM antenna.
- * ANTENNA_NUM: Number of antennas.
- * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
- * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
- * FRAME_TYPE: 0: DPDT , 1: SPDT , noted this bit is valid for g only.
- * DYN_TXAGC: Dynamic TX AGC control.
- * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0.
- * RF_TYPE: Rf_type of this adapter.
- */
-#define EEPROM_ANTENNA			0x0010
-#define EEPROM_ANTENNA_NUM		FIELD16(0x0003)
-#define EEPROM_ANTENNA_TX_DEFAULT	FIELD16(0x000c)
-#define EEPROM_ANTENNA_RX_DEFAULT	FIELD16(0x0030)
-#define EEPROM_ANTENNA_FRAME_TYPE	FIELD16(0x0040)
-#define EEPROM_ANTENNA_DYN_TXAGC	FIELD16(0x0200)
-#define EEPROM_ANTENNA_HARDWARE_RADIO	FIELD16(0x0400)
-#define EEPROM_ANTENNA_RF_TYPE		FIELD16(0xf800)
-
-/*
- * EEPROM NIC config.
- * EXTERNAL_LNA: External LNA.
- */
-#define EEPROM_NIC			0x0011
-#define EEPROM_NIC_EXTERNAL_LNA		FIELD16(0x0010)
-
-/*
- * EEPROM geography.
- * GEO_A: Default geographical setting for 5GHz band
- * GEO: Default geographical setting.
- */
-#define EEPROM_GEOGRAPHY		0x0012
-#define EEPROM_GEOGRAPHY_GEO_A		FIELD16(0x00ff)
-#define EEPROM_GEOGRAPHY_GEO		FIELD16(0xff00)
-
-/*
- * EEPROM BBP.
- */
-#define EEPROM_BBP_START		0x0013
-#define EEPROM_BBP_SIZE			16
-#define EEPROM_BBP_VALUE		FIELD16(0x00ff)
-#define EEPROM_BBP_REG_ID		FIELD16(0xff00)
-
-/*
- * EEPROM TXPOWER 802.11G
- */
-#define EEPROM_TXPOWER_G_START		0x0023
-#define EEPROM_TXPOWER_G_SIZE		7
-#define EEPROM_TXPOWER_G_1		FIELD16(0x00ff)
-#define EEPROM_TXPOWER_G_2		FIELD16(0xff00)
-
-/*
- * EEPROM Frequency
- */
-#define EEPROM_FREQ			0x002f
-#define EEPROM_FREQ_OFFSET		FIELD16(0x00ff)
-#define EEPROM_FREQ_SEQ_MASK		FIELD16(0xff00)
-#define EEPROM_FREQ_SEQ			FIELD16(0x0300)
-
-/*
- * EEPROM LED.
- * POLARITY_RDY_G: Polarity RDY_G setting.
- * POLARITY_RDY_A: Polarity RDY_A setting.
- * POLARITY_ACT: Polarity ACT setting.
- * POLARITY_GPIO_0: Polarity GPIO0 setting.
- * POLARITY_GPIO_1: Polarity GPIO1 setting.
- * POLARITY_GPIO_2: Polarity GPIO2 setting.
- * POLARITY_GPIO_3: Polarity GPIO3 setting.
- * POLARITY_GPIO_4: Polarity GPIO4 setting.
- * LED_MODE: Led mode.
- */
-#define EEPROM_LED			0x0030
-#define EEPROM_LED_POLARITY_RDY_G	FIELD16(0x0001)
-#define EEPROM_LED_POLARITY_RDY_A	FIELD16(0x0002)
-#define EEPROM_LED_POLARITY_ACT		FIELD16(0x0004)
-#define EEPROM_LED_POLARITY_GPIO_0	FIELD16(0x0008)
-#define EEPROM_LED_POLARITY_GPIO_1	FIELD16(0x0010)
-#define EEPROM_LED_POLARITY_GPIO_2	FIELD16(0x0020)
-#define EEPROM_LED_POLARITY_GPIO_3	FIELD16(0x0040)
-#define EEPROM_LED_POLARITY_GPIO_4	FIELD16(0x0080)
-#define EEPROM_LED_LED_MODE		FIELD16(0x1f00)
-
-/*
- * EEPROM TXPOWER 802.11A
- */
-#define EEPROM_TXPOWER_A_START		0x0031
-#define EEPROM_TXPOWER_A_SIZE		12
-#define EEPROM_TXPOWER_A_1		FIELD16(0x00ff)
-#define EEPROM_TXPOWER_A_2		FIELD16(0xff00)
-
-/*
- * EEPROM RSSI offset 802.11BG
- */
-#define EEPROM_RSSI_OFFSET_BG		0x004d
-#define EEPROM_RSSI_OFFSET_BG_1		FIELD16(0x00ff)
-#define EEPROM_RSSI_OFFSET_BG_2		FIELD16(0xff00)
-
-/*
- * EEPROM RSSI offset 802.11A
- */
-#define EEPROM_RSSI_OFFSET_A		0x004e
-#define EEPROM_RSSI_OFFSET_A_1		FIELD16(0x00ff)
-#define EEPROM_RSSI_OFFSET_A_2		FIELD16(0xff00)
-
-/*
- * DMA descriptor defines.
- */
-#define TXD_DESC_SIZE			( 6 * sizeof(__le32) )
-#define TXINFO_SIZE			( 6 * sizeof(__le32) )
-#define RXD_DESC_SIZE			( 6 * sizeof(__le32) )
-
-/*
- * TX descriptor format for TX, PRIO and Beacon Ring.
- */
-
-/*
- * Word0
- * BURST: Next frame belongs to same "burst" event.
- * TKIP_MIC: ASIC appends TKIP MIC if TKIP is used.
- * KEY_TABLE: Use per-client pairwise KEY table.
- * KEY_INDEX:
- * Key index (0~31) to the pairwise KEY table.
- * 0~3 to shared KEY table 0 (BSS0).
- * 4~7 to shared KEY table 1 (BSS1).
- * 8~11 to shared KEY table 2 (BSS2).
- * 12~15 to shared KEY table 3 (BSS3).
- * BURST2: For backward compatibility, set to same value as BURST.
- */
-#define TXD_W0_BURST			FIELD32(0x00000001)
-#define TXD_W0_VALID			FIELD32(0x00000002)
-#define TXD_W0_MORE_FRAG		FIELD32(0x00000004)
-#define TXD_W0_ACK			FIELD32(0x00000008)
-#define TXD_W0_TIMESTAMP		FIELD32(0x00000010)
-#define TXD_W0_OFDM			FIELD32(0x00000020)
-#define TXD_W0_IFS			FIELD32(0x00000040)
-#define TXD_W0_RETRY_MODE		FIELD32(0x00000080)
-#define TXD_W0_TKIP_MIC			FIELD32(0x00000100)
-#define TXD_W0_KEY_TABLE		FIELD32(0x00000200)
-#define TXD_W0_KEY_INDEX		FIELD32(0x0000fc00)
-#define TXD_W0_DATABYTE_COUNT		FIELD32(0x0fff0000)
-#define TXD_W0_BURST2			FIELD32(0x10000000)
-#define TXD_W0_CIPHER_ALG		FIELD32(0xe0000000)
-
-/*
- * Word1
- * HOST_Q_ID: EDCA/HCCA queue ID.
- * HW_SEQUENCE: MAC overwrites the frame sequence number.
- * BUFFER_COUNT: Number of buffers in this TXD.
- */
-#define TXD_W1_HOST_Q_ID		FIELD32(0x0000000f)
-#define TXD_W1_AIFSN			FIELD32(0x000000f0)
-#define TXD_W1_CWMIN			FIELD32(0x00000f00)
-#define TXD_W1_CWMAX			FIELD32(0x0000f000)
-#define TXD_W1_IV_OFFSET		FIELD32(0x003f0000)
-#define TXD_W1_HW_SEQUENCE		FIELD32(0x10000000)
-#define TXD_W1_BUFFER_COUNT		FIELD32(0xe0000000)
-
-/*
- * Word2: PLCP information
- */
-#define TXD_W2_PLCP_SIGNAL		FIELD32(0x000000ff)
-#define TXD_W2_PLCP_SERVICE		FIELD32(0x0000ff00)
-#define TXD_W2_PLCP_LENGTH_LOW		FIELD32(0x00ff0000)
-#define TXD_W2_PLCP_LENGTH_HIGH		FIELD32(0xff000000)
-
-/*
- * Word3
- */
-#define TXD_W3_IV			FIELD32(0xffffffff)
-
-/*
- * Word4
- */
-#define TXD_W4_EIV			FIELD32(0xffffffff)
-
-/*
- * Word5
- * FRAME_OFFSET: Frame start offset inside ASIC TXFIFO (after TXINFO field).
- * PACKET_ID: Driver assigned packet ID to categorize TXResult in interrupt.
- * WAITING_DMA_DONE_INT: TXD been filled with data
- * and waiting for TxDoneISR housekeeping.
- */
-#define TXD_W5_FRAME_OFFSET		FIELD32(0x000000ff)
-#define TXD_W5_PACKET_ID		FIELD32(0x0000ff00)
-#define TXD_W5_TX_POWER			FIELD32(0x00ff0000)
-#define TXD_W5_WAITING_DMA_DONE_INT	FIELD32(0x01000000)
-
-/*
- * RX descriptor format for RX Ring.
- */
-
-/*
- * Word0
- * CIPHER_ERROR: 1:ICV error, 2:MIC error, 3:invalid key.
- * KEY_INDEX: Decryption key actually used.
- */
-#define RXD_W0_OWNER_NIC		FIELD32(0x00000001)
-#define RXD_W0_DROP			FIELD32(0x00000002)
-#define RXD_W0_UNICAST_TO_ME		FIELD32(0x00000004)
-#define RXD_W0_MULTICAST		FIELD32(0x00000008)
-#define RXD_W0_BROADCAST		FIELD32(0x00000010)
-#define RXD_W0_MY_BSS			FIELD32(0x00000020)
-#define RXD_W0_CRC_ERROR		FIELD32(0x00000040)
-#define RXD_W0_OFDM			FIELD32(0x00000080)
-#define RXD_W0_CIPHER_ERROR		FIELD32(0x00000300)
-#define RXD_W0_KEY_INDEX		FIELD32(0x0000fc00)
-#define RXD_W0_DATABYTE_COUNT		FIELD32(0x0fff0000)
-#define RXD_W0_CIPHER_ALG		FIELD32(0xe0000000)
-
-/*
- * WORD1
- * SIGNAL: RX raw data rate reported by BBP.
- * RSSI: RSSI reported by BBP.
- */
-#define RXD_W1_SIGNAL			FIELD32(0x000000ff)
-#define RXD_W1_RSSI_AGC			FIELD32(0x00001f00)
-#define RXD_W1_RSSI_LNA			FIELD32(0x00006000)
-#define RXD_W1_FRAME_OFFSET		FIELD32(0x7f000000)
-
-/*
- * Word2
- * IV: Received IV of originally encrypted.
- */
-#define RXD_W2_IV			FIELD32(0xffffffff)
-
-/*
- * Word3
- * EIV: Received EIV of originally encrypted.
- */
-#define RXD_W3_EIV			FIELD32(0xffffffff)
-
-/*
- * Word4
- * ICV: Received ICV of originally encrypted.
- * NOTE: This is a guess, the official definition is "reserved"
- */
-#define RXD_W4_ICV			FIELD32(0xffffffff)
-
-/*
- * the above 20-byte is called RXINFO and will be DMAed to MAC RX block
- * and passed to the HOST driver.
- * The following fields are for DMA block and HOST usage only.
- * Can't be touched by ASIC MAC block.
- */
-
-/*
- * Word5
- */
-#define RXD_W5_RESERVED			FIELD32(0xffffffff)
-
-/*
- * Macros for converting txpower from EEPROM to mac80211 value
- * and from mac80211 value to register value.
- */
-#define MIN_TXPOWER	0
-#define MAX_TXPOWER	31
-#define DEFAULT_TXPOWER	24
-
-#define TXPOWER_FROM_DEV(__txpower) \
-	(((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
-
-#define TXPOWER_TO_DEV(__txpower) \
-	clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER)
-
-#endif /* RT73USB_H */