Move all rtl818x files to a common directory.

This change improves the maintainability of these drivers. No functionality
is changed.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 0 insertions, 202 deletions

diff --git a/drivers/net/wireless/rtl8180_sa2400.c b/drivers/net/wireless/rtl8180_sa2400.c
deleted file mode 100644
index cea4e0ccb92d..000000000000
--- a/drivers/net/wireless/rtl8180_sa2400.c
+++ /dev/null
@@ -1,202 +0,0 @@
-
-/*
- * Radio tuning for Philips SA2400 on RTL8180
- *
- * Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
- *
- * Code from the BSD driver and the rtl8181 project have been
- * very useful to understand certain things
- *
- * I want to thanks the Authors of such projects and the Ndiswrapper
- * project Authors.
- *
- * A special Big Thanks also is for all people who donated me cards,
- * making possible the creation of the original rtl8180 driver
- * from which this code is derived!
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <net/mac80211.h>
-
-#include "rtl8180.h"
-#include "rtl8180_sa2400.h"
-
-static const u32 sa2400_chan[] = {
-	0x00096c, /* ch1 */
-	0x080970,
-	0x100974,
-	0x180978,
-	0x000980,
-	0x080984,
-	0x100988,
-	0x18098c,
-	0x000994,
-	0x080998,
-	0x10099c,
-	0x1809a0,
-	0x0009a8,
-	0x0009b4, /* ch 14 */
-};
-
-static void write_sa2400(struct ieee80211_hw *dev, u8 addr, u32 data)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	u32 phy_config;
-
-	/* MAC will bang bits to the sa2400. sw 3-wire is NOT used */
-	phy_config = 0xb0000000;
-
-	phy_config |= ((u32)(addr & 0xf)) << 24;
-	phy_config |= data & 0xffffff;
-
-	rtl818x_iowrite32(priv,
-		(__le32 __iomem *) &priv->map->RFPinsOutput, phy_config);
-
-	msleep(3);
-}
-
-static void sa2400_write_phy_antenna(struct ieee80211_hw *dev, short chan)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	u8 ant = SA2400_ANTENNA;
-
-	if (priv->rfparam & RF_PARAM_ANTBDEFAULT)
-		ant |= BB_ANTENNA_B;
-
-	if (chan == 14)
-		ant |= BB_ANTATTEN_CHAN14;
-
-	rtl8180_write_phy(dev, 0x10, ant);
-
-}
-
-static void sa2400_rf_set_channel(struct ieee80211_hw *dev,
-				  struct ieee80211_conf *conf)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	int channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
-	u32 txpw = priv->channels[channel - 1].hw_value & 0xFF;
-	u32 chan = sa2400_chan[channel - 1];
-
-	write_sa2400(dev, 7, txpw);
-
-	sa2400_write_phy_antenna(dev, channel);
-
-	write_sa2400(dev, 0, chan);
-	write_sa2400(dev, 1, 0xbb50);
-	write_sa2400(dev, 2, 0x80);
-	write_sa2400(dev, 3, 0);
-}
-
-static void sa2400_rf_stop(struct ieee80211_hw *dev)
-{
-	write_sa2400(dev, 4, 0);
-}
-
-static void sa2400_rf_init(struct ieee80211_hw *dev)
-{
-	struct rtl8180_priv *priv = dev->priv;
-	u32 anaparam, txconf;
-	u8 firdac;
-	int analogphy = priv->rfparam & RF_PARAM_ANALOGPHY;
-
-	anaparam = priv->anaparam;
-	anaparam &= ~(1 << ANAPARAM_TXDACOFF_SHIFT);
-	anaparam &= ~ANAPARAM_PWR1_MASK;
-	anaparam &= ~ANAPARAM_PWR0_MASK;
-
-	if (analogphy) {
-		anaparam |= SA2400_ANA_ANAPARAM_PWR1_ON << ANAPARAM_PWR1_SHIFT;
-		firdac = 0;
-	} else {
-		anaparam |= (SA2400_DIG_ANAPARAM_PWR1_ON << ANAPARAM_PWR1_SHIFT);
-		anaparam |= (SA2400_ANAPARAM_PWR0_ON << ANAPARAM_PWR0_SHIFT);
-		firdac = 1 << SA2400_REG4_FIRDAC_SHIFT;
-	}
-
-	rtl8180_set_anaparam(priv, anaparam);
-
-	write_sa2400(dev, 0, sa2400_chan[0]);
-	write_sa2400(dev, 1, 0xbb50);
-	write_sa2400(dev, 2, 0x80);
-	write_sa2400(dev, 3, 0);
-	write_sa2400(dev, 4, 0x19340 | firdac);
-	write_sa2400(dev, 5, 0x1dfb | (SA2400_MAX_SENS - 54) << 15);
-	write_sa2400(dev, 4, 0x19348 | firdac); /* calibrate VCO */
-
-	if (!analogphy)
-		write_sa2400(dev, 4, 0x1938c); /*???*/
-
-	write_sa2400(dev, 4, 0x19340 | firdac);
-
-	write_sa2400(dev, 0, sa2400_chan[0]);
-	write_sa2400(dev, 1, 0xbb50);
-	write_sa2400(dev, 2, 0x80);
-	write_sa2400(dev, 3, 0);
-	write_sa2400(dev, 4, 0x19344 | firdac); /* calibrate filter */
-
-	/* new from rtl8180 embedded driver (rtl8181 project) */
-	write_sa2400(dev, 6, 0x13ff | (1 << 23)); /* MANRX */
-	write_sa2400(dev, 8, 0); /* VCO */
-
-	if (analogphy) {
-		rtl8180_set_anaparam(priv, anaparam |
-				     (1 << ANAPARAM_TXDACOFF_SHIFT));
-
-		txconf = rtl818x_ioread32(priv, &priv->map->TX_CONF);
-		rtl818x_iowrite32(priv, &priv->map->TX_CONF,
-			txconf | RTL818X_TX_CONF_LOOPBACK_CONT);
-
-		write_sa2400(dev, 4, 0x19341); /* calibrates DC */
-
-		/* a 5us sleep is required here,
-		 * we rely on the 3ms delay introduced in write_sa2400 */
-		write_sa2400(dev, 4, 0x19345);
-
-		/* a 20us sleep is required here,
-		 * we rely on the 3ms delay introduced in write_sa2400 */
-
-		rtl818x_iowrite32(priv, &priv->map->TX_CONF, txconf);
-
-		rtl8180_set_anaparam(priv, anaparam);
-	}
-	/* end new code */
-
-	write_sa2400(dev, 4, 0x19341 | firdac); /* RTX MODE */
-
-	/* baseband configuration */
-	rtl8180_write_phy(dev, 0, 0x98);
-	rtl8180_write_phy(dev, 3, 0x38);
-	rtl8180_write_phy(dev, 4, 0xe0);
-	rtl8180_write_phy(dev, 5, 0x90);
-	rtl8180_write_phy(dev, 6, 0x1a);
-	rtl8180_write_phy(dev, 7, 0x64);
-
-	sa2400_write_phy_antenna(dev, 1);
-
-	rtl8180_write_phy(dev, 0x11, 0x80);
-
-	if (rtl818x_ioread8(priv, &priv->map->CONFIG2) &
-	    RTL818X_CONFIG2_ANTENNA_DIV)
-		rtl8180_write_phy(dev, 0x12, 0xc7); /* enable ant diversity */
-	else
-		rtl8180_write_phy(dev, 0x12, 0x47); /* disable ant diversity */
-
-	rtl8180_write_phy(dev, 0x13, 0x90 | priv->csthreshold);
-
-	rtl8180_write_phy(dev, 0x19, 0x0);
-	rtl8180_write_phy(dev, 0x1a, 0xa0);
-}
-
-const struct rtl818x_rf_ops sa2400_rf_ops = {
-	.name		= "Philips",
-	.init		= sa2400_rf_init,
-	.stop		= sa2400_rf_stop,
-	.set_chan	= sa2400_rf_set_channel
-};