Merge branch 'master' into for-2.6.35

Conflicts:
	fs/ext3/fsync.c

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

35 files changed, 2765 insertions, 1431 deletions

diff --git a/drivers/net/wireless/wl12xx/Kconfig b/drivers/net/wireless/wl12xx/Kconfig
index 785e0244e305..337fc7bec5a5 100644
--- a/drivers/net/wireless/wl12xx/Kconfig
+++ b/drivers/net/wireless/wl12xx/Kconfig
@@ -51,3 +51,27 @@ config WL1271
 
 	  If you choose to build a module, it'll be called wl1271. Say N if
 	  unsure.
+
+config WL1271_SPI
+	tristate "TI wl1271 SPI support"
+	depends on WL1271 && SPI_MASTER
+	---help---
+	  This module adds support for the SPI interface of adapters using
+	  TI wl1271 chipset.  Select this if your platform is using
+	  the SPI bus.
+
+	  If you choose to build a module, it'll be called wl1251_spi.
+	  Say N if unsure.
+
+config WL1271_SDIO
+	tristate "TI wl1271 SDIO support"
+	depends on WL1271 && MMC && ARM
+	---help---
+	  This module adds support for the SDIO interface of adapters using
+	  TI wl1271 chipset.  Select this if your platform is using
+	  the SDIO bus.
+
+	  If you choose to build a module, it'll be called
+	  wl1271_sdio. Say N if unsure.
+
+
diff --git a/drivers/net/wireless/wl12xx/Makefile b/drivers/net/wireless/wl12xx/Makefile
index f47ec94c16dc..27ddd2be0a91 100644
--- a/drivers/net/wireless/wl12xx/Makefile
+++ b/drivers/net/wireless/wl12xx/Makefile
@@ -7,10 +7,12 @@ obj-$(CONFIG_WL1251)	+= wl1251.o
 obj-$(CONFIG_WL1251_SPI)	+= wl1251_spi.o
 obj-$(CONFIG_WL1251_SDIO)	+= wl1251_sdio.o
 
-wl1271-objs		= wl1271_main.o  wl1271_spi.o wl1271_cmd.o  \
+wl1271-objs		= wl1271_main.o  wl1271_cmd.o wl1271_io.o \
 			  wl1271_event.o wl1271_tx.o  wl1271_rx.o   \
 			  wl1271_ps.o    wl1271_acx.o wl1271_boot.o \
-			  wl1271_init.o  wl1271_debugfs.o wl1271_io.o
+			  wl1271_init.o  wl1271_debugfs.o
 
 wl1271-$(CONFIG_NL80211_TESTMODE)	+= wl1271_testmode.o
 obj-$(CONFIG_WL1271)	+= wl1271.o
+obj-$(CONFIG_WL1271_SPI)	+= wl1271_spi.o
+obj-$(CONFIG_WL1271_SDIO)	+= wl1271_sdio.o
diff --git a/drivers/net/wireless/wl12xx/wl1251.h b/drivers/net/wireless/wl12xx/wl1251.h
index 37c61c19cae5..4f5f02a26e62 100644
--- a/drivers/net/wireless/wl12xx/wl1251.h
+++ b/drivers/net/wireless/wl12xx/wl1251.h
@@ -256,6 +256,8 @@ struct wl1251_debugfs {
 struct wl1251_if_operations {
 	void (*read)(struct wl1251 *wl, int addr, void *buf, size_t len);
 	void (*write)(struct wl1251 *wl, int addr, void *buf, size_t len);
+	void (*read_elp)(struct wl1251 *wl, int addr, u32 *val);
+	void (*write_elp)(struct wl1251 *wl, int addr, u32 val);
 	void (*reset)(struct wl1251 *wl);
 	void (*enable_irq)(struct wl1251 *wl);
 	void (*disable_irq)(struct wl1251 *wl);
diff --git a/drivers/net/wireless/wl12xx/wl1251_boot.c b/drivers/net/wireless/wl12xx/wl1251_boot.c
index d5ac79aeaa73..2545123931e8 100644
--- a/drivers/net/wireless/wl12xx/wl1251_boot.c
+++ b/drivers/net/wireless/wl12xx/wl1251_boot.c
@@ -497,7 +497,8 @@ int wl1251_boot(struct wl1251 *wl)
 	/* 2. start processing NVS file */
 	if (wl->use_eeprom) {
 		wl1251_reg_write32(wl, ACX_REG_EE_START, START_EEPROM_MGR);
-		msleep(4000);
+		/* Wait for EEPROM NVS burst read to complete */
+		msleep(40);
 		wl1251_reg_write32(wl, ACX_EEPROMLESS_IND_REG, USE_EEPROM);
 	} else {
 		ret = wl1251_boot_upload_nvs(wl);
diff --git a/drivers/net/wireless/wl12xx/wl1251_io.h b/drivers/net/wireless/wl12xx/wl1251_io.h
index b89d2ac62efb..c545e9d5f512 100644
--- a/drivers/net/wireless/wl12xx/wl1251_io.h
+++ b/drivers/net/wireless/wl12xx/wl1251_io.h
@@ -48,6 +48,26 @@ static inline void wl1251_write32(struct wl1251 *wl, int addr, u32 val)
 	wl->if_ops->write(wl, addr, &val, sizeof(u32));
 }
 
+static inline u32 wl1251_read_elp(struct wl1251 *wl, int addr)
+{
+	u32 response;
+
+	if (wl->if_ops->read_elp)
+		wl->if_ops->read_elp(wl, addr, &response);
+	else
+		wl->if_ops->read(wl, addr, &response, sizeof(u32));
+
+	return response;
+}
+
+static inline void wl1251_write_elp(struct wl1251 *wl, int addr, u32 val)
+{
+	if (wl->if_ops->write_elp)
+		wl->if_ops->write_elp(wl, addr, val);
+	else
+		wl->if_ops->write(wl, addr, &val, sizeof(u32));
+}
+
 /* Memory target IO, address is translated to partition 0 */
 void wl1251_mem_read(struct wl1251 *wl, int addr, void *buf, size_t len);
 void wl1251_mem_write(struct wl1251 *wl, int addr, void *buf, size_t len);
diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c
index 1c8226eee409..00b24282fc73 100644
--- a/drivers/net/wireless/wl12xx/wl1251_main.c
+++ b/drivers/net/wireless/wl12xx/wl1251_main.c
@@ -147,8 +147,8 @@ static void wl1251_fw_wakeup(struct wl1251 *wl)
 	u32 elp_reg;
 
 	elp_reg = ELPCTRL_WAKE_UP;
-	wl1251_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, elp_reg);
-	elp_reg = wl1251_read32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR);
+	wl1251_write_elp(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, elp_reg);
+	elp_reg = wl1251_read_elp(wl, HW_ACCESS_ELP_CTRL_REG_ADDR);
 
 	if (!(elp_reg & ELPCTRL_WLAN_READY))
 		wl1251_warning("WLAN not ready");
@@ -202,8 +202,8 @@ static int wl1251_chip_wakeup(struct wl1251 *wl)
 			goto out;
 	}
 
-	/* No NVS from netlink, try to get it from the filesystem */
-	if (wl->nvs == NULL) {
+	if (wl->nvs == NULL && !wl->use_eeprom) {
+		/* No NVS from netlink, try to get it from the filesystem */
 		ret = wl1251_fetch_nvs(wl);
 		if (ret < 0)
 			goto out;
@@ -857,6 +857,7 @@ out:
 }
 
 static int wl1251_op_hw_scan(struct ieee80211_hw *hw,
+			     struct ieee80211_vif *vif,
 			     struct cfg80211_scan_request *req)
 {
 	struct wl1251 *wl = hw->priv;
@@ -1196,6 +1197,66 @@ static const struct ieee80211_ops wl1251_ops = {
 	.conf_tx = wl1251_op_conf_tx,
 };
 
+static int wl1251_read_eeprom_byte(struct wl1251 *wl, off_t offset, u8 *data)
+{
+	unsigned long timeout;
+
+	wl1251_reg_write32(wl, EE_ADDR, offset);
+	wl1251_reg_write32(wl, EE_CTL, EE_CTL_READ);
+
+	/* EE_CTL_READ clears when data is ready */
+	timeout = jiffies + msecs_to_jiffies(100);
+	while (1) {
+		if (!(wl1251_reg_read32(wl, EE_CTL) & EE_CTL_READ))
+			break;
+
+		if (time_after(jiffies, timeout))
+			return -ETIMEDOUT;
+
+		msleep(1);
+	}
+
+	*data = wl1251_reg_read32(wl, EE_DATA);
+	return 0;
+}
+
+static int wl1251_read_eeprom(struct wl1251 *wl, off_t offset,
+			      u8 *data, size_t len)
+{
+	size_t i;
+	int ret;
+
+	wl1251_reg_write32(wl, EE_START, 0);
+
+	for (i = 0; i < len; i++) {
+		ret = wl1251_read_eeprom_byte(wl, offset + i, &data[i]);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int wl1251_read_eeprom_mac(struct wl1251 *wl)
+{
+	u8 mac[ETH_ALEN];
+	int i, ret;
+
+	wl1251_set_partition(wl, 0, 0, REGISTERS_BASE, REGISTERS_DOWN_SIZE);
+
+	ret = wl1251_read_eeprom(wl, 0x1c, mac, sizeof(mac));
+	if (ret < 0) {
+		wl1251_warning("failed to read MAC address from EEPROM");
+		return ret;
+	}
+
+	/* MAC is stored in reverse order */
+	for (i = 0; i < ETH_ALEN; i++)
+		wl->mac_addr[i] = mac[ETH_ALEN - i - 1];
+
+	return 0;
+}
+
 static int wl1251_register_hw(struct wl1251 *wl)
 {
 	int ret;
@@ -1231,7 +1292,6 @@ int wl1251_init_ieee80211(struct wl1251 *wl)
 	wl->hw->channel_change_time = 10000;
 
 	wl->hw->flags = IEEE80211_HW_SIGNAL_DBM |
-		IEEE80211_HW_NOISE_DBM |
 		IEEE80211_HW_SUPPORTS_PS |
 		IEEE80211_HW_BEACON_FILTER |
 		IEEE80211_HW_SUPPORTS_UAPSD;
@@ -1242,6 +1302,9 @@ int wl1251_init_ieee80211(struct wl1251 *wl)
 
 	wl->hw->queues = 4;
 
+	if (wl->use_eeprom)
+		wl1251_read_eeprom_mac(wl);
+
 	ret = wl1251_register_hw(wl);
 	if (ret)
 		goto out;
diff --git a/drivers/net/wireless/wl12xx/wl1251_ps.c b/drivers/net/wireless/wl12xx/wl1251_ps.c
index 851dfb65e474..b55cb2bd459a 100644
--- a/drivers/net/wireless/wl12xx/wl1251_ps.c
+++ b/drivers/net/wireless/wl12xx/wl1251_ps.c
@@ -45,7 +45,7 @@ void wl1251_elp_work(struct work_struct *work)
 		goto out;
 
 	wl1251_debug(DEBUG_PSM, "chip to elp");
-	wl1251_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_SLEEP);
+	wl1251_write_elp(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_SLEEP);
 	wl->elp = true;
 
 out:
@@ -79,9 +79,9 @@ int wl1251_ps_elp_wakeup(struct wl1251 *wl)
 	start = jiffies;
 	timeout = jiffies + msecs_to_jiffies(WL1251_WAKEUP_TIMEOUT);
 
-	wl1251_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_WAKE_UP);
+	wl1251_write_elp(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_WAKE_UP);
 
-	elp_reg = wl1251_read32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR);
+	elp_reg = wl1251_read_elp(wl, HW_ACCESS_ELP_CTRL_REG_ADDR);
 
 	/*
 	 * FIXME: we should wait for irq from chip but, as a temporary
@@ -93,7 +93,7 @@ int wl1251_ps_elp_wakeup(struct wl1251 *wl)
 			return -ETIMEDOUT;
 		}
 		msleep(1);
-		elp_reg = wl1251_read32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR);
+		elp_reg = wl1251_read_elp(wl, HW_ACCESS_ELP_CTRL_REG_ADDR);
 	}
 
 	wl1251_debug(DEBUG_PSM, "wakeup time: %u ms",
diff --git a/drivers/net/wireless/wl12xx/wl1251_reg.h b/drivers/net/wireless/wl12xx/wl1251_reg.h
index 0ca3b4326056..d16edd9bf06c 100644
--- a/drivers/net/wireless/wl12xx/wl1251_reg.h
+++ b/drivers/net/wireless/wl12xx/wl1251_reg.h
@@ -46,7 +46,14 @@
 #define SOR_CFG                        (REGISTERS_BASE + 0x0800)
 #define ECPU_CTRL                      (REGISTERS_BASE + 0x0804)
 #define HI_CFG                         (REGISTERS_BASE + 0x0808)
+
+/* EEPROM registers */
 #define EE_START                       (REGISTERS_BASE + 0x080C)
+#define EE_CTL                         (REGISTERS_BASE + 0x2000)
+#define EE_DATA                        (REGISTERS_BASE + 0x2004)
+#define EE_ADDR                        (REGISTERS_BASE + 0x2008)
+
+#define EE_CTL_READ                   2
 
 #define CHIP_ID_B                      (REGISTERS_BASE + 0x5674)
 
diff --git a/drivers/net/wireless/wl12xx/wl1251_rx.c b/drivers/net/wireless/wl12xx/wl1251_rx.c
index 6f229e0990f4..851515836a7f 100644
--- a/drivers/net/wireless/wl12xx/wl1251_rx.c
+++ b/drivers/net/wireless/wl12xx/wl1251_rx.c
@@ -74,12 +74,6 @@ static void wl1251_rx_status(struct wl1251 *wl,
 
 	status->signal = desc->rssi;
 
-	/*
-	 * FIXME: guessing that snr needs to be divided by two, otherwise
-	 * the values don't make any sense
-	 */
-	status->noise = desc->rssi - desc->snr / 2;
-
 	status->freq = ieee80211_channel_to_frequency(desc->channel);
 
 	status->flag |= RX_FLAG_TSFT;
@@ -189,6 +183,4 @@ void wl1251_rx(struct wl1251 *wl)
 
 	/* Finally, we need to ACK the RX */
 	wl1251_rx_ack(wl);
-
-	return;
 }
diff --git a/drivers/net/wireless/wl12xx/wl1251_sdio.c b/drivers/net/wireless/wl12xx/wl1251_sdio.c
index 9423f22bdced..d234285c2c81 100644
--- a/drivers/net/wireless/wl12xx/wl1251_sdio.c
+++ b/drivers/net/wireless/wl12xx/wl1251_sdio.c
@@ -20,20 +20,14 @@
  * Copyright (C) 2009 Bob Copeland (me@bobcopeland.com)
  */
 #include <linux/module.h>
-#include <linux/crc7.h>
 #include <linux/mod_devicetable.h>
-#include <linux/irq.h>
 #include <linux/mmc/sdio_func.h>
 #include <linux/mmc/sdio_ids.h>
 #include <linux/platform_device.h>
+#include <linux/spi/wl12xx.h>
+#include <linux/irq.h>
 
 #include "wl1251.h"
-#include "wl12xx_80211.h"
-#include "wl1251_reg.h"
-#include "wl1251_ps.h"
-#include "wl1251_io.h"
-#include "wl1251_tx.h"
-#include "wl1251_debugfs.h"
 
 #ifndef SDIO_VENDOR_ID_TI
 #define SDIO_VENDOR_ID_TI		0x104c
@@ -43,6 +37,8 @@
 #define SDIO_DEVICE_ID_TI_WL1251	0x9066
 #endif
 
+static struct wl12xx_platform_data *wl12xx_board_data;
+
 static struct sdio_func *wl_to_func(struct wl1251 *wl)
 {
 	return wl->if_priv;
@@ -65,7 +61,8 @@ static const struct sdio_device_id wl1251_devices[] = {
 MODULE_DEVICE_TABLE(sdio, wl1251_devices);
 
 
-void wl1251_sdio_read(struct wl1251 *wl, int addr, void *buf, size_t len)
+static void wl1251_sdio_read(struct wl1251 *wl, int addr,
+			     void *buf, size_t len)
 {
 	int ret;
 	struct sdio_func *func = wl_to_func(wl);
@@ -77,7 +74,8 @@ void wl1251_sdio_read(struct wl1251 *wl, int addr, void *buf, size_t len)
 	sdio_release_host(func);
 }
 
-void wl1251_sdio_write(struct wl1251 *wl, int addr, void *buf, size_t len)
+static void wl1251_sdio_write(struct wl1251 *wl, int addr,
+			      void *buf, size_t len)
 {
 	int ret;
 	struct sdio_func *func = wl_to_func(wl);
@@ -89,7 +87,33 @@ void wl1251_sdio_write(struct wl1251 *wl, int addr, void *buf, size_t len)
 	sdio_release_host(func);
 }
 
-void wl1251_sdio_reset(struct wl1251 *wl)
+static void wl1251_sdio_read_elp(struct wl1251 *wl, int addr, u32 *val)
+{
+	int ret = 0;
+	struct sdio_func *func = wl_to_func(wl);
+
+	sdio_claim_host(func);
+	*val = sdio_readb(func, addr, &ret);
+	sdio_release_host(func);
+
+	if (ret)
+		wl1251_error("sdio_readb failed (%d)", ret);
+}
+
+static void wl1251_sdio_write_elp(struct wl1251 *wl, int addr, u32 val)
+{
+	int ret = 0;
+	struct sdio_func *func = wl_to_func(wl);
+
+	sdio_claim_host(func);
+	sdio_writeb(func, val, addr, &ret);
+	sdio_release_host(func);
+
+	if (ret)
+		wl1251_error("sdio_writeb failed (%d)", ret);
+}
+
+static void wl1251_sdio_reset(struct wl1251 *wl)
 {
 }
 
@@ -111,19 +135,64 @@ static void wl1251_sdio_disable_irq(struct wl1251 *wl)
 	sdio_release_host(func);
 }
 
-void wl1251_sdio_set_power(bool enable)
+/* Interrupts when using dedicated WLAN_IRQ pin */
+static irqreturn_t wl1251_line_irq(int irq, void *cookie)
+{
+	struct wl1251 *wl = cookie;
+
+	ieee80211_queue_work(wl->hw, &wl->irq_work);
+
+	return IRQ_HANDLED;
+}
+
+static void wl1251_enable_line_irq(struct wl1251 *wl)
 {
+	return enable_irq(wl->irq);
 }
 
-struct wl1251_if_operations wl1251_sdio_ops = {
+static void wl1251_disable_line_irq(struct wl1251 *wl)
+{
+	return disable_irq(wl->irq);
+}
+
+static void wl1251_sdio_set_power(bool enable)
+{
+}
+
+static struct wl1251_if_operations wl1251_sdio_ops = {
 	.read = wl1251_sdio_read,
 	.write = wl1251_sdio_write,
+	.write_elp = wl1251_sdio_write_elp,
+	.read_elp = wl1251_sdio_read_elp,
 	.reset = wl1251_sdio_reset,
-	.enable_irq = wl1251_sdio_enable_irq,
-	.disable_irq = wl1251_sdio_disable_irq,
 };
 
-int wl1251_sdio_probe(struct sdio_func *func, const struct sdio_device_id *id)
+static int wl1251_platform_probe(struct platform_device *pdev)
+{
+	if (pdev->id != -1) {
+		wl1251_error("can only handle single device");
+		return -ENODEV;
+	}
+
+	wl12xx_board_data = pdev->dev.platform_data;
+	return 0;
+}
+
+/*
+ * Dummy platform_driver for passing platform_data to this driver,
+ * until we have a way to pass this through SDIO subsystem or
+ * some other way.
+ */
+static struct platform_driver wl1251_platform_driver = {
+	.driver = {
+		.name	= "wl1251_data",
+		.owner	= THIS_MODULE,
+	},
+	.probe	= wl1251_platform_probe,
+};
+
+static int wl1251_sdio_probe(struct sdio_func *func,
+			     const struct sdio_device_id *id)
 {
 	int ret;
 	struct wl1251 *wl;
@@ -141,20 +210,50 @@ int wl1251_sdio_probe(struct sdio_func *func, const struct sdio_device_id *id)
 		goto release;
 
 	sdio_set_block_size(func, 512);
+	sdio_release_host(func);
 
 	SET_IEEE80211_DEV(hw, &func->dev);
 	wl->if_priv = func;
 	wl->if_ops = &wl1251_sdio_ops;
 	wl->set_power = wl1251_sdio_set_power;
 
-	sdio_release_host(func);
+	if (wl12xx_board_data != NULL) {
+		wl->set_power = wl12xx_board_data->set_power;
+		wl->irq = wl12xx_board_data->irq;
+		wl->use_eeprom = wl12xx_board_data->use_eeprom;
+	}
+
+	if (wl->irq) {
+		ret = request_irq(wl->irq, wl1251_line_irq, 0, "wl1251", wl);
+		if (ret < 0) {
+			wl1251_error("request_irq() failed: %d", ret);
+			goto disable;
+		}
+
+		set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING);
+		disable_irq(wl->irq);
+
+		wl1251_sdio_ops.enable_irq = wl1251_enable_line_irq;
+		wl1251_sdio_ops.disable_irq = wl1251_disable_line_irq;
+
+		wl1251_info("using dedicated interrupt line");
+	} else {
+		wl1251_sdio_ops.enable_irq = wl1251_sdio_enable_irq;
+		wl1251_sdio_ops.disable_irq = wl1251_sdio_disable_irq;
+
+		wl1251_info("using SDIO interrupt");
+	}
+
 	ret = wl1251_init_ieee80211(wl);
 	if (ret)
-		goto disable;
+		goto out_free_irq;
 
 	sdio_set_drvdata(func, wl);
 	return ret;
 
+out_free_irq:
+	if (wl->irq)
+		free_irq(wl->irq, wl);
 disable:
 	sdio_claim_host(func);
 	sdio_disable_func(func);
@@ -167,6 +266,8 @@ static void __devexit wl1251_sdio_remove(struct sdio_func *func)
 {
 	struct wl1251 *wl = sdio_get_drvdata(func);
 
+	if (wl->irq)
+		free_irq(wl->irq, wl);
 	wl1251_free_hw(wl);
 
 	sdio_claim_host(func);
@@ -186,6 +287,12 @@ static int __init wl1251_sdio_init(void)
 {
 	int err;
 
+	err = platform_driver_register(&wl1251_platform_driver);
+	if (err) {
+		wl1251_error("failed to register platform driver: %d", err);
+		return err;
+	}
+
 	err = sdio_register_driver(&wl1251_sdio_driver);
 	if (err)
 		wl1251_error("failed to register sdio driver: %d", err);
@@ -195,6 +302,7 @@ static int __init wl1251_sdio_init(void)
 static void __exit wl1251_sdio_exit(void)
 {
 	sdio_unregister_driver(&wl1251_sdio_driver);
+	platform_driver_unregister(&wl1251_platform_driver);
 	wl1251_notice("unloaded");
 }
 
diff --git a/drivers/net/wireless/wl12xx/wl1251_spi.c b/drivers/net/wireless/wl12xx/wl1251_spi.c
index 3bfb59bd4635..e81474203a23 100644
--- a/drivers/net/wireless/wl12xx/wl1251_spi.c
+++ b/drivers/net/wireless/wl12xx/wl1251_spi.c
@@ -310,7 +310,7 @@ static int __devexit wl1251_spi_remove(struct spi_device *spi)
 
 static struct spi_driver wl1251_spi_driver = {
 	.driver = {
-		.name		= "wl1251",
+		.name		= DRIVER_NAME,
 		.bus		= &spi_bus_type,
 		.owner		= THIS_MODULE,
 	},
diff --git a/drivers/net/wireless/wl12xx/wl1271.h b/drivers/net/wireless/wl12xx/wl1271.h
index 97ea5096bc8c..6f1b6b5640c0 100644
--- a/drivers/net/wireless/wl12xx/wl1271.h
+++ b/drivers/net/wireless/wl12xx/wl1271.h
@@ -53,6 +53,9 @@ enum {
 	DEBUG_MAC80211	= BIT(11),
 	DEBUG_CMD	= BIT(12),
 	DEBUG_ACX	= BIT(13),
+	DEBUG_SDIO	= BIT(14),
+	DEBUG_FILTERS   = BIT(15),
+	DEBUG_ADHOC     = BIT(16),
 	DEBUG_ALL	= ~0,
 };
 
@@ -110,6 +113,9 @@ enum {
 #define WL1271_FW_NAME "wl1271-fw.bin"
 #define WL1271_NVS_NAME "wl1271-nvs.bin"
 
+#define WL1271_TX_SECURITY_LO16(s) ((u16)((s) & 0xffff))
+#define WL1271_TX_SECURITY_HI32(s) ((u32)(((s) >> 16) & 0xffffffff))
+
 /* NVS data structure */
 #define WL1271_NVS_SECTION_SIZE                  468
 
@@ -142,14 +148,7 @@ struct wl1271_nvs_file {
  */
 #undef WL1271_80211A_ENABLED
 
-/*
- * FIXME: for the wl1271, a busy word count of 1 here will result in a more
- * optimal SPI interface. There is some SPI bug however, causing RXS time outs
- * with this mode occasionally on boot, so lets have three for now. A value of
- * three should make sure, that the chipset will always be ready, though this
- * will impact throughput and latencies slightly.
- */
-#define WL1271_BUSY_WORD_CNT 3
+#define WL1271_BUSY_WORD_CNT 1
 #define WL1271_BUSY_WORD_LEN (WL1271_BUSY_WORD_CNT * sizeof(u32))
 
 #define WL1271_ELP_HW_STATE_ASLEEP 0
@@ -334,11 +333,27 @@ struct wl1271_scan {
 	u8 probe_requests;
 };
 
+struct wl1271_if_operations {
+	void (*read)(struct wl1271 *wl, int addr, void *buf, size_t len,
+		     bool fixed);
+	void (*write)(struct wl1271 *wl, int addr, void *buf, size_t len,
+		     bool fixed);
+	void (*reset)(struct wl1271 *wl);
+	void (*init)(struct wl1271 *wl);
+	void (*power)(struct wl1271 *wl, bool enable);
+	struct device* (*dev)(struct wl1271 *wl);
+	void (*enable_irq)(struct wl1271 *wl);
+	void (*disable_irq)(struct wl1271 *wl);
+};
+
 struct wl1271 {
+	struct platform_device *plat_dev;
 	struct ieee80211_hw *hw;
 	bool mac80211_registered;
 
-	struct spi_device *spi;
+	void *if_priv;
+
+	struct wl1271_if_operations *if_ops;
 
 	void (*set_power)(bool enable);
 	int irq;
@@ -357,6 +372,9 @@ struct wl1271 {
 #define WL1271_FLAG_IN_ELP             (6)
 #define WL1271_FLAG_PSM                (7)
 #define WL1271_FLAG_PSM_REQUESTED      (8)
+#define WL1271_FLAG_IRQ_PENDING        (9)
+#define WL1271_FLAG_IRQ_RUNNING       (10)
+#define WL1271_FLAG_IDLE              (11)
 	unsigned long flags;
 
 	struct wl1271_partition_set part;
@@ -370,9 +388,12 @@ struct wl1271 {
 	size_t fw_len;
 	struct wl1271_nvs_file *nvs;
 
+	s8 hw_pg_ver;
+
 	u8 bssid[ETH_ALEN];
 	u8 mac_addr[ETH_ALEN];
 	u8 bss_type;
+	u8 set_bss_type;
 	u8 ssid[IW_ESSID_MAX_SIZE + 1];
 	u8 ssid_len;
 	int channel;
@@ -382,13 +403,13 @@ struct wl1271 {
 	/* Accounting for allocated / available TX blocks on HW */
 	u32 tx_blocks_freed[NUM_TX_QUEUES];
 	u32 tx_blocks_available;
-	u8 tx_results_count;
+	u32 tx_results_count;
 
 	/* Transmitted TX packets counter for chipset interface */
-	int tx_packets_count;
+	u32 tx_packets_count;
 
 	/* Time-offset between host and chipset clocks */
-	int time_offset;
+	s64 time_offset;
 
 	/* Session counter for the chipset */
 	int session_counter;
@@ -403,8 +424,7 @@ struct wl1271 {
 
 	/* Security sequence number counters */
 	u8 tx_security_last_seq;
-	u16 tx_security_seq_16;
-	u32 tx_security_seq_32;
+	s64 tx_security_seq;
 
 	/* FW Rx counter */
 	u32 rx_counter;
@@ -430,14 +450,19 @@ struct wl1271 {
 	/* currently configured rate set */
 	u32 sta_rate_set;
 	u32 basic_rate_set;
+	u32 basic_rate;
 	u32 rate_set;
 
 	/* The current band */
 	enum ieee80211_band band;
 
+	/* Beaconing interval (needed for ad-hoc) */
+	u32 beacon_int;
+
 	/* Default key (for WEP) */
 	u32 default_key;
 
+	unsigned int filters;
 	unsigned int rx_config;
 	unsigned int rx_filter;
 
@@ -450,10 +475,13 @@ struct wl1271 {
 	/* in dBm */
 	int power_level;
 
+	int rssi_thold;
+	int last_rssi_event;
+
 	struct wl1271_stats stats;
 	struct wl1271_debugfs debugfs;
 
-	u32 buffer_32;
+	__le32 buffer_32;
 	u32 buffer_cmd;
 	u32 buffer_busyword[WL1271_BUSY_WORD_CNT];
 
@@ -465,6 +493,8 @@ struct wl1271 {
 	/* Current chipset configuration */
 	struct conf_drv_settings conf;
 
+	bool sg_enabled;
+
 	struct list_head list;
 };
 
@@ -477,7 +507,8 @@ int wl1271_plt_stop(struct wl1271 *wl);
 
 #define WL1271_DEFAULT_POWER_LEVEL 0
 
-#define WL1271_TX_QUEUE_MAX_LENGTH 20
+#define WL1271_TX_QUEUE_LOW_WATERMARK  10
+#define WL1271_TX_QUEUE_HIGH_WATERMARK 25
 
 /* WL1271 needs a 200ms sleep after power on, and a 20ms sleep before power
    on in case is has been shut down shortly before */
diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.c b/drivers/net/wireless/wl12xx/wl1271_acx.c
index 308782421fce..e19e2f8f1e52 100644
--- a/drivers/net/wireless/wl12xx/wl1271_acx.c
+++ b/drivers/net/wireless/wl12xx/wl1271_acx.c
@@ -32,7 +32,6 @@
 #include "wl1271.h"
 #include "wl12xx_80211.h"
 #include "wl1271_reg.h"
-#include "wl1271_spi.h"
 #include "wl1271_ps.h"
 
 int wl1271_acx_wake_up_conditions(struct wl1271 *wl)
@@ -137,12 +136,7 @@ int wl1271_acx_tx_power(struct wl1271 *wl, int power)
 		goto out;
 	}
 
-	/*
-	 * FIXME: This is a workaround needed while we don't the correct
-	 * calibration, to avoid distortions
-	 */
-	/* acx->current_tx_power = power * 10; */
-	acx->current_tx_power = 120;
+	acx->current_tx_power = power * 10;
 
 	ret = wl1271_cmd_configure(wl, DOT11_CUR_TX_PWR, acx, sizeof(*acx));
 	if (ret < 0) {
@@ -511,12 +505,17 @@ out:
 	return ret;
 }
 
-int wl1271_acx_conn_monit_params(struct wl1271 *wl)
+#define ACX_CONN_MONIT_DISABLE_VALUE  0xffffffff
+
+int wl1271_acx_conn_monit_params(struct wl1271 *wl, bool enable)
 {
 	struct acx_conn_monit_params *acx;
+	u32 threshold = ACX_CONN_MONIT_DISABLE_VALUE;
+	u32 timeout = ACX_CONN_MONIT_DISABLE_VALUE;
 	int ret;
 
-	wl1271_debug(DEBUG_ACX, "acx connection monitor parameters");
+	wl1271_debug(DEBUG_ACX, "acx connection monitor parameters: %s",
+		     enable ? "enabled" : "disabled");
 
 	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
 	if (!acx) {
@@ -524,8 +523,13 @@ int wl1271_acx_conn_monit_params(struct wl1271 *wl)
 		goto out;
 	}
 
-	acx->synch_fail_thold = cpu_to_le32(wl->conf.conn.synch_fail_thold);
-	acx->bss_lose_timeout = cpu_to_le32(wl->conf.conn.bss_lose_timeout);
+	if (enable) {
+		threshold = wl->conf.conn.synch_fail_thold;
+		timeout = wl->conf.conn.bss_lose_timeout;
+	}
+
+	acx->synch_fail_thold = cpu_to_le32(threshold);
+	acx->bss_lose_timeout = cpu_to_le32(timeout);
 
 	ret = wl1271_cmd_configure(wl, ACX_CONN_MONIT_PARAMS,
 				   acx, sizeof(*acx));
@@ -541,7 +545,7 @@ out:
 }
 
 
-int wl1271_acx_sg_enable(struct wl1271 *wl)
+int wl1271_acx_sg_enable(struct wl1271 *wl, bool enable)
 {
 	struct acx_bt_wlan_coex *pta;
 	int ret;
@@ -554,7 +558,10 @@ int wl1271_acx_sg_enable(struct wl1271 *wl)
 		goto out;
 	}
 
-	pta->enable = SG_ENABLE;
+	if (enable)
+		pta->enable = wl->conf.sg.state;
+	else
+		pta->enable = CONF_SG_DISABLE;
 
 	ret = wl1271_cmd_configure(wl, ACX_SG_ENABLE, pta, sizeof(*pta));
 	if (ret < 0) {
@@ -571,7 +578,7 @@ int wl1271_acx_sg_cfg(struct wl1271 *wl)
 {
 	struct acx_bt_wlan_coex_param *param;
 	struct conf_sg_settings *c = &wl->conf.sg;
-	int ret;
+	int i, ret;
 
 	wl1271_debug(DEBUG_ACX, "acx sg cfg");
 
@@ -582,19 +589,9 @@ int wl1271_acx_sg_cfg(struct wl1271 *wl)
 	}
 
 	/* BT-WLAN coext parameters */
-	param->per_threshold = cpu_to_le32(c->per_threshold);
-	param->max_scan_compensation_time =
-		cpu_to_le32(c->max_scan_compensation_time);
-	param->nfs_sample_interval = cpu_to_le16(c->nfs_sample_interval);
-	param->load_ratio = c->load_ratio;
-	param->auto_ps_mode = c->auto_ps_mode;
-	param->probe_req_compensation = c->probe_req_compensation;
-	param->scan_window_compensation = c->scan_window_compensation;
-	param->antenna_config = c->antenna_config;
-	param->beacon_miss_threshold = c->beacon_miss_threshold;
-	param->rate_adaptation_threshold =
-		cpu_to_le32(c->rate_adaptation_threshold);
-	param->rate_adaptation_snr = c->rate_adaptation_snr;
+	for (i = 0; i < CONF_SG_PARAMS_MAX; i++)
+		param->params[i] = cpu_to_le32(c->params[i]);
+	param->param_idx = CONF_SG_PARAMS_ALL;
 
 	ret = wl1271_cmd_configure(wl, ACX_SG_CFG, param, sizeof(*param));
 	if (ret < 0) {
@@ -806,7 +803,7 @@ int wl1271_acx_rate_policies(struct wl1271 *wl)
 
 	/* configure one basic rate class */
 	idx = ACX_TX_BASIC_RATE;
-	acx->rate_class[idx].enabled_rates = cpu_to_le32(wl->basic_rate_set);
+	acx->rate_class[idx].enabled_rates = cpu_to_le32(wl->basic_rate);
 	acx->rate_class[idx].short_retry_limit = c->short_retry_limit;
 	acx->rate_class[idx].long_retry_limit = c->long_retry_limit;
 	acx->rate_class[idx].aflags = c->aflags;
@@ -1143,3 +1140,129 @@ out:
 	kfree(acx);
 	return ret;
 }
+
+int wl1271_acx_keep_alive_mode(struct wl1271 *wl, bool enable)
+{
+	struct wl1271_acx_keep_alive_mode *acx = NULL;
+	int ret = 0;
+
+	wl1271_debug(DEBUG_ACX, "acx keep alive mode: %d", enable);
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+	if (!acx) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	acx->enabled = enable;
+
+	ret = wl1271_cmd_configure(wl, ACX_KEEP_ALIVE_MODE, acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1271_warning("acx keep alive mode failed: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx);
+	return ret;
+}
+
+int wl1271_acx_keep_alive_config(struct wl1271 *wl, u8 index, u8 tpl_valid)
+{
+	struct wl1271_acx_keep_alive_config *acx = NULL;
+	int ret = 0;
+
+	wl1271_debug(DEBUG_ACX, "acx keep alive config");
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+	if (!acx) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	acx->period = cpu_to_le32(wl->conf.conn.keep_alive_interval);
+	acx->index = index;
+	acx->tpl_validation = tpl_valid;
+	acx->trigger = ACX_KEEP_ALIVE_NO_TX;
+
+	ret = wl1271_cmd_configure(wl, ACX_SET_KEEP_ALIVE_CONFIG,
+				   acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1271_warning("acx keep alive config failed: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx);
+	return ret;
+}
+
+int wl1271_acx_rssi_snr_trigger(struct wl1271 *wl, bool enable,
+				s16 thold, u8 hyst)
+{
+	struct wl1271_acx_rssi_snr_trigger *acx = NULL;
+	int ret = 0;
+
+	wl1271_debug(DEBUG_ACX, "acx rssi snr trigger");
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+	if (!acx) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	wl->last_rssi_event = -1;
+
+	acx->pacing = cpu_to_le16(wl->conf.roam_trigger.trigger_pacing);
+	acx->metric = WL1271_ACX_TRIG_METRIC_RSSI_BEACON;
+	acx->type = WL1271_ACX_TRIG_TYPE_EDGE;
+	if (enable)
+		acx->enable = WL1271_ACX_TRIG_ENABLE;
+	else
+		acx->enable = WL1271_ACX_TRIG_DISABLE;
+
+	acx->index = WL1271_ACX_TRIG_IDX_RSSI;
+	acx->dir = WL1271_ACX_TRIG_DIR_BIDIR;
+	acx->threshold = cpu_to_le16(thold);
+	acx->hysteresis = hyst;
+
+	ret = wl1271_cmd_configure(wl, ACX_RSSI_SNR_TRIGGER, acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1271_warning("acx rssi snr trigger setting failed: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx);
+	return ret;
+}
+
+int wl1271_acx_rssi_snr_avg_weights(struct wl1271 *wl)
+{
+	struct wl1271_acx_rssi_snr_avg_weights *acx = NULL;
+	struct conf_roam_trigger_settings *c = &wl->conf.roam_trigger;
+	int ret = 0;
+
+	wl1271_debug(DEBUG_ACX, "acx rssi snr avg weights");
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+	if (!acx) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	acx->rssi_beacon = c->avg_weight_rssi_beacon;
+	acx->rssi_data = c->avg_weight_rssi_data;
+	acx->snr_beacon = c->avg_weight_snr_beacon;
+	acx->snr_data = c->avg_weight_snr_data;
+
+	ret = wl1271_cmd_configure(wl, ACX_RSSI_SNR_WEIGHTS, acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1271_warning("acx rssi snr trigger weights failed: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx);
+	return ret;
+}
diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.h b/drivers/net/wireless/wl12xx/wl1271_acx.h
index aeccc98581eb..420e7e2fc021 100644
--- a/drivers/net/wireless/wl12xx/wl1271_acx.h
+++ b/drivers/net/wireless/wl12xx/wl1271_acx.h
@@ -392,81 +392,27 @@ struct acx_conn_monit_params {
        __le32 bss_lose_timeout; /* number of TU's from synch fail */
 } __attribute__ ((packed));
 
-enum {
-	SG_ENABLE = 0,
-	SG_DISABLE,
-	SG_SENSE_NO_ACTIVITY,
-	SG_SENSE_ACTIVE
-};
-
 struct acx_bt_wlan_coex {
 	struct acx_header header;
 
-	/*
-	 * 0 -> PTA enabled
-	 * 1 -> PTA disabled
-	 * 2 -> sense no active mode, i.e.
-	 *      an interrupt is sent upon
-	 *      BT activity.
-	 * 3 -> PTA is switched on in response
-	 *      to the interrupt sending.
-	 */
 	u8 enable;
 	u8 pad[3];
 } __attribute__ ((packed));
 
-struct acx_dco_itrim_params {
+struct acx_bt_wlan_coex_param {
 	struct acx_header header;
 
-	u8 enable;
+	__le32 params[CONF_SG_PARAMS_MAX];
+	u8 param_idx;
 	u8 padding[3];
-	__le32 timeout;
 } __attribute__ ((packed));
 
-#define PTA_ANTENNA_TYPE_DEF		  (0)
-#define PTA_BT_HP_MAXTIME_DEF		  (2000)
-#define PTA_WLAN_HP_MAX_TIME_DEF	  (5000)
-#define PTA_SENSE_DISABLE_TIMER_DEF	  (1350)
-#define PTA_PROTECTIVE_RX_TIME_DEF	  (1500)
-#define PTA_PROTECTIVE_TX_TIME_DEF	  (1500)
-#define PTA_TIMEOUT_NEXT_BT_LP_PACKET_DEF (3000)
-#define PTA_SIGNALING_TYPE_DEF		  (1)
-#define PTA_AFH_LEVERAGE_ON_DEF		  (0)
-#define PTA_NUMBER_QUIET_CYCLE_DEF	  (0)
-#define PTA_MAX_NUM_CTS_DEF		  (3)
-#define PTA_NUMBER_OF_WLAN_PACKETS_DEF	  (2)
-#define PTA_NUMBER_OF_BT_PACKETS_DEF	  (2)
-#define PTA_PROTECTIVE_RX_TIME_FAST_DEF	  (1500)
-#define PTA_PROTECTIVE_TX_TIME_FAST_DEF	  (3000)
-#define PTA_CYCLE_TIME_FAST_DEF		  (8700)
-#define PTA_RX_FOR_AVALANCHE_DEF	  (5)
-#define PTA_ELP_HP_DEF			  (0)
-#define PTA_ANTI_STARVE_PERIOD_DEF	  (500)
-#define PTA_ANTI_STARVE_NUM_CYCLE_DEF	  (4)
-#define PTA_ALLOW_PA_SD_DEF		  (1)
-#define PTA_TIME_BEFORE_BEACON_DEF	  (6300)
-#define PTA_HPDM_MAX_TIME_DEF		  (1600)
-#define PTA_TIME_OUT_NEXT_WLAN_DEF	  (2550)
-#define PTA_AUTO_MODE_NO_CTS_DEF	  (0)
-#define PTA_BT_HP_RESPECTED_DEF		  (3)
-#define PTA_WLAN_RX_MIN_RATE_DEF	  (24)
-#define PTA_ACK_MODE_DEF		  (1)
-
-struct acx_bt_wlan_coex_param {
+struct acx_dco_itrim_params {
 	struct acx_header header;
 
-	__le32 per_threshold;
-	__le32 max_scan_compensation_time;
-	__le16 nfs_sample_interval;
-	u8 load_ratio;
-	u8 auto_ps_mode;
-	u8 probe_req_compensation;
-	u8 scan_window_compensation;
-	u8 antenna_config;
-	u8 beacon_miss_threshold;
-	__le32 rate_adaptation_threshold;
-	s8 rate_adaptation_snr;
+	u8 enable;
 	u8 padding[3];
+	__le32 timeout;
 } __attribute__ ((packed));
 
 struct acx_energy_detection {
@@ -969,6 +915,84 @@ struct wl1271_acx_pm_config {
 	u8 padding[3];
 } __attribute__ ((packed));
 
+struct wl1271_acx_keep_alive_mode {
+	struct acx_header header;
+
+	u8 enabled;
+	u8 padding[3];
+} __attribute__ ((packed));
+
+enum {
+	ACX_KEEP_ALIVE_NO_TX = 0,
+	ACX_KEEP_ALIVE_PERIOD_ONLY
+};
+
+enum {
+	ACX_KEEP_ALIVE_TPL_INVALID = 0,
+	ACX_KEEP_ALIVE_TPL_VALID
+};
+
+struct wl1271_acx_keep_alive_config {
+	struct acx_header header;
+
+	__le32 period;
+	u8 index;
+	u8 tpl_validation;
+	u8 trigger;
+	u8 padding;
+} __attribute__ ((packed));
+
+enum {
+	WL1271_ACX_TRIG_TYPE_LEVEL = 0,
+	WL1271_ACX_TRIG_TYPE_EDGE,
+};
+
+enum {
+	WL1271_ACX_TRIG_DIR_LOW = 0,
+	WL1271_ACX_TRIG_DIR_HIGH,
+	WL1271_ACX_TRIG_DIR_BIDIR,
+};
+
+enum {
+	WL1271_ACX_TRIG_ENABLE = 1,
+	WL1271_ACX_TRIG_DISABLE,
+};
+
+enum {
+	WL1271_ACX_TRIG_METRIC_RSSI_BEACON = 0,
+	WL1271_ACX_TRIG_METRIC_RSSI_DATA,
+	WL1271_ACX_TRIG_METRIC_SNR_BEACON,
+	WL1271_ACX_TRIG_METRIC_SNR_DATA,
+};
+
+enum {
+	WL1271_ACX_TRIG_IDX_RSSI = 0,
+	WL1271_ACX_TRIG_COUNT = 8,
+};
+
+struct wl1271_acx_rssi_snr_trigger {
+	struct acx_header header;
+
+	__le16 threshold;
+	__le16 pacing; /* 0 - 60000 ms */
+	u8 metric;
+	u8 type;
+	u8 dir;
+	u8 hysteresis;
+	u8 index;
+	u8 enable;
+	u8 padding[2];
+};
+
+struct wl1271_acx_rssi_snr_avg_weights {
+	struct acx_header header;
+
+	u8 rssi_beacon;
+	u8 rssi_data;
+	u8 snr_beacon;
+	u8 snr_data;
+};
+
 enum {
 	ACX_WAKE_UP_CONDITIONS      = 0x0002,
 	ACX_MEM_CFG                 = 0x0003,
@@ -1017,8 +1041,8 @@ enum {
 	ACX_FRAG_CFG                = 0x004F,
 	ACX_BET_ENABLE              = 0x0050,
 	ACX_RSSI_SNR_TRIGGER        = 0x0051,
-	ACX_RSSI_SNR_WEIGHTS        = 0x0051,
-	ACX_KEEP_ALIVE_MODE         = 0x0052,
+	ACX_RSSI_SNR_WEIGHTS        = 0x0052,
+	ACX_KEEP_ALIVE_MODE         = 0x0053,
 	ACX_SET_KEEP_ALIVE_CONFIG   = 0x0054,
 	ACX_BA_SESSION_RESPONDER_POLICY = 0x0055,
 	ACX_BA_SESSION_INITIATOR_POLICY = 0x0056,
@@ -1058,8 +1082,8 @@ int wl1271_acx_rts_threshold(struct wl1271 *wl, u16 rts_threshold);
 int wl1271_acx_dco_itrim_params(struct wl1271 *wl);
 int wl1271_acx_beacon_filter_opt(struct wl1271 *wl, bool enable_filter);
 int wl1271_acx_beacon_filter_table(struct wl1271 *wl);
-int wl1271_acx_conn_monit_params(struct wl1271 *wl);
-int wl1271_acx_sg_enable(struct wl1271 *wl);
+int wl1271_acx_conn_monit_params(struct wl1271 *wl, bool enable);
+int wl1271_acx_sg_enable(struct wl1271 *wl, bool enable);
 int wl1271_acx_sg_cfg(struct wl1271 *wl);
 int wl1271_acx_cca_threshold(struct wl1271 *wl);
 int wl1271_acx_bcn_dtim_options(struct wl1271 *wl);
@@ -1085,5 +1109,10 @@ int wl1271_acx_bet_enable(struct wl1271 *wl, bool enable);
 int wl1271_acx_arp_ip_filter(struct wl1271 *wl, bool enable, u8 *address,
 			     u8 version);
 int wl1271_acx_pm_config(struct wl1271 *wl);
+int wl1271_acx_keep_alive_mode(struct wl1271 *wl, bool enable);
+int wl1271_acx_keep_alive_config(struct wl1271 *wl, u8 index, u8 tpl_valid);
+int wl1271_acx_rssi_snr_trigger(struct wl1271 *wl, bool enable,
+				s16 thold, u8 hyst);
+int wl1271_acx_rssi_snr_avg_weights(struct wl1271 *wl);
 
 #endif /* __WL1271_ACX_H__ */
diff --git a/drivers/net/wireless/wl12xx/wl1271_boot.c b/drivers/net/wireless/wl12xx/wl1271_boot.c
index 024356263065..1a36d8a2196e 100644
--- a/drivers/net/wireless/wl12xx/wl1271_boot.c
+++ b/drivers/net/wireless/wl12xx/wl1271_boot.c
@@ -1,7 +1,7 @@
 /*
  * This file is part of wl1271
  *
- * Copyright (C) 2008-2009 Nokia Corporation
+ * Copyright (C) 2008-2010 Nokia Corporation
  *
  * Contact: Luciano Coelho <luciano.coelho@nokia.com>
  *
@@ -27,7 +27,6 @@
 #include "wl1271_acx.h"
 #include "wl1271_reg.h"
 #include "wl1271_boot.h"
-#include "wl1271_spi.h"
 #include "wl1271_io.h"
 #include "wl1271_event.h"
 
@@ -230,6 +229,14 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl)
 	nvs_len = sizeof(wl->nvs->nvs);
 	nvs_ptr = (u8 *)wl->nvs->nvs;
 
+	/* update current MAC address to NVS */
+	nvs_ptr[11] = wl->mac_addr[0];
+	nvs_ptr[10] = wl->mac_addr[1];
+	nvs_ptr[6] = wl->mac_addr[2];
+	nvs_ptr[5] = wl->mac_addr[3];
+	nvs_ptr[4] = wl->mac_addr[4];
+	nvs_ptr[3] = wl->mac_addr[5];
+
 	/*
 	 * Layout before the actual NVS tables:
 	 * 1 byte : burst length.
@@ -300,7 +307,7 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl)
 
 static void wl1271_boot_enable_interrupts(struct wl1271 *wl)
 {
-	enable_irq(wl->irq);
+	wl1271_enable_interrupts(wl);
 	wl1271_write32(wl, ACX_REG_INTERRUPT_MASK,
 		       WL1271_ACX_INTR_ALL & ~(WL1271_INTR_MASK));
 	wl1271_write32(wl, HI_CFG, HI_CFG_DEF_VAL);
@@ -344,7 +351,7 @@ static int wl1271_boot_soft_reset(struct wl1271 *wl)
 static int wl1271_boot_run_firmware(struct wl1271 *wl)
 {
 	int loop, ret;
-	u32 chip_id, interrupt;
+	u32 chip_id, intr;
 
 	wl1271_boot_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT);
 
@@ -361,15 +368,15 @@ static int wl1271_boot_run_firmware(struct wl1271 *wl)
 	loop = 0;
 	while (loop++ < INIT_LOOP) {
 		udelay(INIT_LOOP_DELAY);
-		interrupt = wl1271_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+		intr = wl1271_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
 
-		if (interrupt == 0xffffffff) {
+		if (intr == 0xffffffff) {
 			wl1271_error("error reading hardware complete "
 				     "init indication");
 			return -EIO;
 		}
 		/* check that ACX_INTR_INIT_COMPLETE is enabled */
-		else if (interrupt & WL1271_ACX_INTR_INIT_COMPLETE) {
+		else if (intr & WL1271_ACX_INTR_INIT_COMPLETE) {
 			wl1271_write32(wl, ACX_REG_INTERRUPT_ACK,
 				       WL1271_ACX_INTR_INIT_COMPLETE);
 			break;
@@ -404,7 +411,10 @@ static int wl1271_boot_run_firmware(struct wl1271 *wl)
 	/* unmask required mbox events  */
 	wl->event_mask = BSS_LOSE_EVENT_ID |
 		SCAN_COMPLETE_EVENT_ID |
-		PS_REPORT_EVENT_ID;
+		PS_REPORT_EVENT_ID |
+		JOIN_EVENT_COMPLETE_ID |
+		DISCONNECT_EVENT_COMPLETE_ID |
+		RSSI_SNR_TRIGGER_0_EVENT_ID;
 
 	ret = wl1271_event_unmask(wl);
 	if (ret < 0) {
@@ -431,11 +441,23 @@ static int wl1271_boot_write_irq_polarity(struct wl1271 *wl)
 	return 0;
 }
 
+static void wl1271_boot_hw_version(struct wl1271 *wl)
+{
+	u32 fuse;
+
+	fuse = wl1271_top_reg_read(wl, REG_FUSE_DATA_2_1);
+	fuse = (fuse & PG_VER_MASK) >> PG_VER_OFFSET;
+
+	wl->hw_pg_ver = (s8)fuse;
+}
+
 int wl1271_boot(struct wl1271 *wl)
 {
 	int ret = 0;
 	u32 tmp, clk, pause;
 
+	wl1271_boot_hw_version(wl);
+
 	if (REF_CLOCK == 0 || REF_CLOCK == 2 || REF_CLOCK == 4)
 		/* ref clk: 19.2/38.4/38.4-XTAL */
 		clk = 0x3;
@@ -445,11 +467,15 @@ int wl1271_boot(struct wl1271 *wl)
 
 	if (REF_CLOCK != 0) {
 		u16 val;
-		/* Set clock type */
+		/* Set clock type (open drain) */
 		val = wl1271_top_reg_read(wl, OCP_REG_CLK_TYPE);
 		val &= FREF_CLK_TYPE_BITS;
-		val |= CLK_REQ_PRCM;
 		wl1271_top_reg_write(wl, OCP_REG_CLK_TYPE, val);
+
+		/* Set clock pull mode (no pull) */
+		val = wl1271_top_reg_read(wl, OCP_REG_CLK_PULL);
+		val |= NO_PULL;
+		wl1271_top_reg_write(wl, OCP_REG_CLK_PULL, val);
 	} else {
 		u16 val;
 		/* Set clock polarity */
diff --git a/drivers/net/wireless/wl12xx/wl1271_boot.h b/drivers/net/wireless/wl12xx/wl1271_boot.h
index 412443ee655a..f829699d597e 100644
--- a/drivers/net/wireless/wl12xx/wl1271_boot.h
+++ b/drivers/net/wireless/wl12xx/wl1271_boot.h
@@ -53,10 +53,16 @@ struct wl1271_static_data {
 #define OCP_REG_POLARITY     0x0064
 #define OCP_REG_CLK_TYPE     0x0448
 #define OCP_REG_CLK_POLARITY 0x0cb2
+#define OCP_REG_CLK_PULL     0x0cb4
 
-#define CMD_MBOX_ADDRESS 0x407B4
+#define REG_FUSE_DATA_2_1    0x050a
+#define PG_VER_MASK          0x3c
+#define PG_VER_OFFSET        2
 
-#define POLARITY_LOW BIT(1)
+#define CMD_MBOX_ADDRESS     0x407B4
+
+#define POLARITY_LOW         BIT(1)
+#define NO_PULL              (BIT(14) | BIT(15))
 
 #define FREF_CLK_TYPE_BITS     0xfffffe7f
 #define CLK_REQ_PRCM           0x100
diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.c b/drivers/net/wireless/wl12xx/wl1271_cmd.c
index e7832f3318eb..19393e236e2c 100644
--- a/drivers/net/wireless/wl12xx/wl1271_cmd.c
+++ b/drivers/net/wireless/wl12xx/wl1271_cmd.c
@@ -1,7 +1,7 @@
 /*
  * This file is part of wl1271
  *
- * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009-2010 Nokia Corporation
  *
  * Contact: Luciano Coelho <luciano.coelho@nokia.com>
  *
@@ -26,15 +26,18 @@
 #include <linux/crc7.h>
 #include <linux/spi/spi.h>
 #include <linux/etherdevice.h>
+#include <linux/ieee80211.h>
 #include <linux/slab.h>
 
 #include "wl1271.h"
 #include "wl1271_reg.h"
-#include "wl1271_spi.h"
 #include "wl1271_io.h"
 #include "wl1271_acx.h"
 #include "wl12xx_80211.h"
 #include "wl1271_cmd.h"
+#include "wl1271_event.h"
+
+#define WL1271_CMD_FAST_POLL_COUNT       50
 
 /*
  * send command to firmware
@@ -52,6 +55,7 @@ int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
 	u32 intr;
 	int ret = 0;
 	u16 status;
+	u16 poll_count = 0;
 
 	cmd = buf;
 	cmd->id = cpu_to_le16(id);
@@ -73,7 +77,11 @@ int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
 			goto out;
 		}
 
-		msleep(1);
+		poll_count++;
+		if (poll_count < WL1271_CMD_FAST_POLL_COUNT)
+			udelay(10);
+		else
+			msleep(1);
 
 		intr = wl1271_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
 	}
@@ -249,7 +257,36 @@ int wl1271_cmd_radio_parms(struct wl1271 *wl)
 	return ret;
 }
 
-int wl1271_cmd_join(struct wl1271 *wl)
+/*
+ * Poll the mailbox event field until any of the bits in the mask is set or a
+ * timeout occurs (WL1271_EVENT_TIMEOUT in msecs)
+ */
+static int wl1271_cmd_wait_for_event(struct wl1271 *wl, u32 mask)
+{
+	u32 events_vector, event;
+	unsigned long timeout;
+
+	timeout = jiffies + msecs_to_jiffies(WL1271_EVENT_TIMEOUT);
+
+	do {
+		if (time_after(jiffies, timeout))
+			return -ETIMEDOUT;
+
+		msleep(1);
+
+		/* read from both event fields */
+		wl1271_read(wl, wl->mbox_ptr[0], &events_vector,
+			    sizeof(events_vector), false);
+		event = events_vector & mask;
+		wl1271_read(wl, wl->mbox_ptr[1], &events_vector,
+			    sizeof(events_vector), false);
+		event |= events_vector & mask;
+	} while (!event);
+
+	return 0;
+}
+
+int wl1271_cmd_join(struct wl1271 *wl, u8 bss_type)
 {
 	static bool do_cal = true;
 	struct wl1271_cmd_join *join;
@@ -280,30 +317,13 @@ int wl1271_cmd_join(struct wl1271 *wl)
 
 	join->rx_config_options = cpu_to_le32(wl->rx_config);
 	join->rx_filter_options = cpu_to_le32(wl->rx_filter);
-	join->bss_type = wl->bss_type;
+	join->bss_type = bss_type;
+	join->basic_rate_set = cpu_to_le32(wl->basic_rate_set);
 
-	/*
-	 * FIXME: disable temporarily all filters because after commit
-	 * 9cef8737 "mac80211: fix managed mode BSSID handling" broke
-	 * association. The filter logic needs to be implemented properly
-	 * and once that is done, this hack can be removed.
-	 */
-	join->rx_config_options = cpu_to_le32(0);
-	join->rx_filter_options = cpu_to_le32(WL1271_DEFAULT_RX_FILTER);
-
-	if (wl->band == IEEE80211_BAND_2GHZ)
-		join->basic_rate_set = cpu_to_le32(CONF_HW_BIT_RATE_1MBPS   |
-						   CONF_HW_BIT_RATE_2MBPS   |
-						   CONF_HW_BIT_RATE_5_5MBPS |
-						   CONF_HW_BIT_RATE_11MBPS);
-	else {
+	if (wl->band == IEEE80211_BAND_5GHZ)
 		join->bss_type |= WL1271_JOIN_CMD_BSS_TYPE_5GHZ;
-		join->basic_rate_set = cpu_to_le32(CONF_HW_BIT_RATE_6MBPS  |
-						   CONF_HW_BIT_RATE_12MBPS |
-						   CONF_HW_BIT_RATE_24MBPS);
-	}
 
-	join->beacon_interval = cpu_to_le16(WL1271_DEFAULT_BEACON_INT);
+	join->beacon_interval = cpu_to_le16(wl->beacon_int);
 	join->dtim_interval = WL1271_DEFAULT_DTIM_PERIOD;
 
 	join->channel = wl->channel;
@@ -320,8 +340,7 @@ int wl1271_cmd_join(struct wl1271 *wl)
 
 	/* reset TX security counters */
 	wl->tx_security_last_seq = 0;
-	wl->tx_security_seq_16 = 0;
-	wl->tx_security_seq_32 = 0;
+	wl->tx_security_seq = 0;
 
 	ret = wl1271_cmd_send(wl, CMD_START_JOIN, join, sizeof(*join), 0);
 	if (ret < 0) {
@@ -329,11 +348,9 @@ int wl1271_cmd_join(struct wl1271 *wl)
 		goto out_free;
 	}
 
-	/*
-	 * ugly hack: we should wait for JOIN_EVENT_COMPLETE_ID but to
-	 * simplify locking we just sleep instead, for now
-	 */
-	msleep(10);
+	ret = wl1271_cmd_wait_for_event(wl, JOIN_EVENT_COMPLETE_ID);
+	if (ret < 0)
+		wl1271_error("cmd join event completion error");
 
 out_free:
 	kfree(join);
@@ -465,7 +482,7 @@ int wl1271_cmd_data_path(struct wl1271 *wl, bool enable)
 	if (ret < 0) {
 		wl1271_error("tx %s cmd for channel %d failed",
 			     enable ? "start" : "stop", cmd->channel);
-		return ret;
+		goto out;
 	}
 
 	wl1271_debug(DEBUG_BOOT, "tx %s cmd channel %d",
@@ -499,7 +516,7 @@ int wl1271_cmd_ps_mode(struct wl1271 *wl, u8 ps_mode, bool send)
 	ps_params->ps_mode = ps_mode;
 	ps_params->send_null_data = send;
 	ps_params->retries = 5;
-	ps_params->hang_over_period = 128;
+	ps_params->hang_over_period = 1;
 	ps_params->null_data_rate = cpu_to_le32(1); /* 1 Mbps */
 
 	ret = wl1271_cmd_send(wl, CMD_SET_PS_MODE, ps_params,
@@ -549,25 +566,29 @@ out:
 	return ret;
 }
 
-int wl1271_cmd_scan(struct wl1271 *wl, u8 *ssid, size_t len,
-		    u8 active_scan, u8 high_prio, u8 band,
-		    u8 probe_requests)
+int wl1271_cmd_scan(struct wl1271 *wl, const u8 *ssid, size_t ssid_len,
+		    const u8 *ie, size_t ie_len, u8 active_scan,
+		    u8 high_prio, u8 band, u8 probe_requests)
 {
 
 	struct wl1271_cmd_trigger_scan_to *trigger = NULL;
 	struct wl1271_cmd_scan *params = NULL;
 	struct ieee80211_channel *channels;
+	u32 rate;
 	int i, j, n_ch, ret;
 	u16 scan_options = 0;
 	u8 ieee_band;
 
-	if (band == WL1271_SCAN_BAND_2_4_GHZ)
+	if (band == WL1271_SCAN_BAND_2_4_GHZ) {
 		ieee_band = IEEE80211_BAND_2GHZ;
-	else if (band == WL1271_SCAN_BAND_DUAL && wl1271_11a_enabled())
+		rate = wl->conf.tx.basic_rate;
+	} else if (band == WL1271_SCAN_BAND_DUAL && wl1271_11a_enabled()) {
 		ieee_band = IEEE80211_BAND_2GHZ;
-	else if (band == WL1271_SCAN_BAND_5_GHZ && wl1271_11a_enabled())
+		rate = wl->conf.tx.basic_rate;
+	} else if (band == WL1271_SCAN_BAND_5_GHZ && wl1271_11a_enabled()) {
 		ieee_band = IEEE80211_BAND_5GHZ;
-	else
+		rate = wl->conf.tx.basic_rate_5;
+	} else
 		return -EINVAL;
 
 	if (wl->hw->wiphy->bands[ieee_band]->channels == NULL)
@@ -594,8 +615,7 @@ int wl1271_cmd_scan(struct wl1271 *wl, u8 *ssid, size_t len,
 	params->params.scan_options = cpu_to_le16(scan_options);
 
 	params->params.num_probe_requests = probe_requests;
-	/* Let the fw autodetect suitable tx_rate for probes */
-	params->params.tx_rate = 0;
+	params->params.tx_rate = cpu_to_le32(rate);
 	params->params.tid_trigger = 0;
 	params->params.scan_tag = WL1271_SCAN_DEFAULT_TAG;
 
@@ -622,12 +642,13 @@ int wl1271_cmd_scan(struct wl1271 *wl, u8 *ssid, size_t len,
 
 	params->params.num_channels = j;
 
-	if (len && ssid) {
-		params->params.ssid_len = len;
-		memcpy(params->params.ssid, ssid, len);
+	if (ssid_len && ssid) {
+		params->params.ssid_len = ssid_len;
+		memcpy(params->params.ssid, ssid, ssid_len);
 	}
 
-	ret = wl1271_cmd_build_probe_req(wl, ssid, len, ieee_band);
+	ret = wl1271_cmd_build_probe_req(wl, ssid, ssid_len,
+					 ie, ie_len, ieee_band);
 	if (ret < 0) {
 		wl1271_error("PROBE request template failed");
 		goto out;
@@ -658,9 +679,9 @@ int wl1271_cmd_scan(struct wl1271 *wl, u8 *ssid, size_t len,
 			wl->scan.active = active_scan;
 			wl->scan.high_prio = high_prio;
 			wl->scan.probe_requests = probe_requests;
-			if (len && ssid) {
-				wl->scan.ssid_len = len;
-				memcpy(wl->scan.ssid, ssid, len);
+			if (ssid_len && ssid) {
+				wl->scan.ssid_len = ssid_len;
+				memcpy(wl->scan.ssid, ssid, ssid_len);
 			} else
 				wl->scan.ssid_len = 0;
 		}
@@ -675,11 +696,12 @@ int wl1271_cmd_scan(struct wl1271 *wl, u8 *ssid, size_t len,
 
 out:
 	kfree(params);
+	kfree(trigger);
 	return ret;
 }
 
 int wl1271_cmd_template_set(struct wl1271 *wl, u16 template_id,
-			    void *buf, size_t buf_len)
+			    void *buf, size_t buf_len, int index, u32 rates)
 {
 	struct wl1271_cmd_template_set *cmd;
 	int ret = 0;
@@ -697,9 +719,10 @@ int wl1271_cmd_template_set(struct wl1271 *wl, u16 template_id,
 
 	cmd->len = cpu_to_le16(buf_len);
 	cmd->template_type = template_id;
-	cmd->enabled_rates = cpu_to_le32(wl->conf.tx.rc_conf.enabled_rates);
+	cmd->enabled_rates = cpu_to_le32(rates);
 	cmd->short_retry_limit = wl->conf.tx.rc_conf.short_retry_limit;
 	cmd->long_retry_limit = wl->conf.tx.rc_conf.long_retry_limit;
+	cmd->index = index;
 
 	if (buf)
 		memcpy(cmd->template_data, buf, buf_len);
@@ -717,155 +740,129 @@ out:
 	return ret;
 }
 
-static int wl1271_build_basic_rates(u8 *rates, u8 band)
+int wl1271_cmd_build_null_data(struct wl1271 *wl)
 {
-	u8 index = 0;
-
-	if (band == IEEE80211_BAND_2GHZ) {
-		rates[index++] =
-			IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_1MB;
-		rates[index++] =
-			IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_2MB;
-		rates[index++] =
-			IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_5MB;
-		rates[index++] =
-			IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_11MB;
-	} else if (band == IEEE80211_BAND_5GHZ) {
-		rates[index++] =
-			IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_6MB;
-		rates[index++] =
-			IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_12MB;
-		rates[index++] =
-			IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_24MB;
-	} else {
-		wl1271_error("build_basic_rates invalid band: %d", band);
-	}
+	struct sk_buff *skb = NULL;
+	int size;
+	void *ptr;
+	int ret = -ENOMEM;
 
-	return index;
-}
 
-static int wl1271_build_extended_rates(u8 *rates, u8 band)
-{
-	u8 index = 0;
-
-	if (band == IEEE80211_BAND_2GHZ) {
-		rates[index++] = IEEE80211_OFDM_RATE_6MB;
-		rates[index++] = IEEE80211_OFDM_RATE_9MB;
-		rates[index++] = IEEE80211_OFDM_RATE_12MB;
-		rates[index++] = IEEE80211_OFDM_RATE_18MB;
-		rates[index++] = IEEE80211_OFDM_RATE_24MB;
-		rates[index++] = IEEE80211_OFDM_RATE_36MB;
-		rates[index++] = IEEE80211_OFDM_RATE_48MB;
-		rates[index++] = IEEE80211_OFDM_RATE_54MB;
-	} else if (band == IEEE80211_BAND_5GHZ) {
-		rates[index++] =
-			IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_9MB;
-		rates[index++] =
-			IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_18MB;
-		rates[index++] =
-			IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_24MB;
-		rates[index++] =
-			IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_36MB;
-		rates[index++] =
-			IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_48MB;
-		rates[index++] =
-			IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_54MB;
+	if (wl->bss_type == BSS_TYPE_IBSS) {
+		size = sizeof(struct wl12xx_null_data_template);
+		ptr = NULL;
 	} else {
-		wl1271_error("build_basic_rates invalid band: %d", band);
+		skb = ieee80211_nullfunc_get(wl->hw, wl->vif);
+		if (!skb)
+			goto out;
+		size = skb->len;
+		ptr = skb->data;
 	}
 
-	return index;
+	ret = wl1271_cmd_template_set(wl, CMD_TEMPL_NULL_DATA, ptr, size, 0,
+				      WL1271_RATE_AUTOMATIC);
+
+out:
+	dev_kfree_skb(skb);
+	if (ret)
+		wl1271_warning("cmd buld null data failed %d", ret);
+
+	return ret;
+
 }
 
-int wl1271_cmd_build_null_data(struct wl1271 *wl)
+int wl1271_cmd_build_klv_null_data(struct wl1271 *wl)
 {
-	struct wl12xx_null_data_template template;
+	struct sk_buff *skb = NULL;
+	int ret = -ENOMEM;
 
-	if (!is_zero_ether_addr(wl->bssid)) {
-		memcpy(template.header.da, wl->bssid, ETH_ALEN);
-		memcpy(template.header.bssid, wl->bssid, ETH_ALEN);
-	} else {
-		memset(template.header.da, 0xff, ETH_ALEN);
-		memset(template.header.bssid, 0xff, ETH_ALEN);
-	}
+	skb = ieee80211_nullfunc_get(wl->hw, wl->vif);
+	if (!skb)
+		goto out;
+
+	ret = wl1271_cmd_template_set(wl, CMD_TEMPL_KLV,
+				      skb->data, skb->len,
+				      CMD_TEMPL_KLV_IDX_NULL_DATA,
+				      WL1271_RATE_AUTOMATIC);
 
-	memcpy(template.header.sa, wl->mac_addr, ETH_ALEN);
-	template.header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_DATA |
-						IEEE80211_STYPE_NULLFUNC |
-						IEEE80211_FCTL_TODS);
+out:
+	dev_kfree_skb(skb);
+	if (ret)
+		wl1271_warning("cmd build klv null data failed %d", ret);
 
-	return wl1271_cmd_template_set(wl, CMD_TEMPL_NULL_DATA, &template,
-				       sizeof(template));
+	return ret;
 
 }
 
 int wl1271_cmd_build_ps_poll(struct wl1271 *wl, u16 aid)
 {
-	struct wl12xx_ps_poll_template template;
-
-	memcpy(template.bssid, wl->bssid, ETH_ALEN);
-	memcpy(template.ta, wl->mac_addr, ETH_ALEN);
-
-	/* aid in PS-Poll has its two MSBs each set to 1 */
-	template.aid = cpu_to_le16(1 << 15 | 1 << 14 | aid);
+	struct sk_buff *skb;
+	int ret = 0;
 
-	template.fc = cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL);
+	skb = ieee80211_pspoll_get(wl->hw, wl->vif);
+	if (!skb)
+		goto out;
 
-	return wl1271_cmd_template_set(wl, CMD_TEMPL_PS_POLL, &template,
-				       sizeof(template));
+	ret = wl1271_cmd_template_set(wl, CMD_TEMPL_PS_POLL, skb->data,
+				      skb->len, 0, wl->basic_rate);
 
+out:
+	dev_kfree_skb(skb);
+	return ret;
 }
 
-int wl1271_cmd_build_probe_req(struct wl1271 *wl, u8 *ssid, size_t ssid_len,
-			       u8 band)
+int wl1271_cmd_build_probe_req(struct wl1271 *wl,
+			       const u8 *ssid, size_t ssid_len,
+			       const u8 *ie, size_t ie_len, u8 band)
 {
-	struct wl12xx_probe_req_template template;
-	struct wl12xx_ie_rates *rates;
-	char *ptr;
-	u16 size;
+	struct sk_buff *skb;
 	int ret;
 
-	ptr = (char *)&template;
-	size = sizeof(struct ieee80211_header);
-
-	memset(template.header.da, 0xff, ETH_ALEN);
-	memset(template.header.bssid, 0xff, ETH_ALEN);
-	memcpy(template.header.sa, wl->mac_addr, ETH_ALEN);
-	template.header.frame_ctl = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ);
-
-	/* IEs */
-	/* SSID */
-	template.ssid.header.id = WLAN_EID_SSID;
-	template.ssid.header.len = ssid_len;
-	if (ssid_len && ssid)
-		memcpy(template.ssid.ssid, ssid, ssid_len);
-	size += sizeof(struct wl12xx_ie_header) + ssid_len;
-	ptr += size;
-
-	/* Basic Rates */
-	rates = (struct wl12xx_ie_rates *)ptr;
-	rates->header.id = WLAN_EID_SUPP_RATES;
-	rates->header.len = wl1271_build_basic_rates(rates->rates, band);
-	size += sizeof(struct wl12xx_ie_header) + rates->header.len;
-	ptr += sizeof(struct wl12xx_ie_header) + rates->header.len;
-
-	/* Extended rates */
-	rates = (struct wl12xx_ie_rates *)ptr;
-	rates->header.id = WLAN_EID_EXT_SUPP_RATES;
-	rates->header.len = wl1271_build_extended_rates(rates->rates, band);
-	size += sizeof(struct wl12xx_ie_header) + rates->header.len;
-
-	wl1271_dump(DEBUG_SCAN, "PROBE REQ: ", &template, size);
+	skb = ieee80211_probereq_get(wl->hw, wl->vif, ssid, ssid_len,
+				     ie, ie_len);
+	if (!skb) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	wl1271_dump(DEBUG_SCAN, "PROBE REQ: ", skb->data, skb->len);
 
 	if (band == IEEE80211_BAND_2GHZ)
 		ret = wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_2_4,
-					      &template, size);
+					      skb->data, skb->len, 0,
+					      wl->conf.tx.basic_rate);
 	else
 		ret = wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_5,
-					      &template, size);
+					      skb->data, skb->len, 0,
+					      wl->conf.tx.basic_rate_5);
+
+out:
+	dev_kfree_skb(skb);
 	return ret;
 }
 
+int wl1271_build_qos_null_data(struct wl1271 *wl)
+{
+	struct ieee80211_qos_hdr template;
+
+	memset(&template, 0, sizeof(template));
+
+	memcpy(template.addr1, wl->bssid, ETH_ALEN);
+	memcpy(template.addr2, wl->mac_addr, ETH_ALEN);
+	memcpy(template.addr3, wl->bssid, ETH_ALEN);
+
+	template.frame_control = cpu_to_le16(IEEE80211_FTYPE_DATA |
+					     IEEE80211_STYPE_QOS_NULLFUNC |
+					     IEEE80211_FCTL_TODS);
+
+	/* FIXME: not sure what priority to use here */
+	template.qos_ctrl = cpu_to_le16(0);
+
+	return wl1271_cmd_template_set(wl, CMD_TEMPL_QOS_NULL_DATA, &template,
+				       sizeof(template), 0,
+				       WL1271_RATE_AUTOMATIC);
+}
+
 int wl1271_cmd_set_default_wep_key(struct wl1271 *wl, u8 id)
 {
 	struct wl1271_cmd_set_keys *cmd;
@@ -976,6 +973,10 @@ int wl1271_cmd_disconnect(struct wl1271 *wl)
 		goto out_free;
 	}
 
+	ret = wl1271_cmd_wait_for_event(wl, DISCONNECT_EVENT_COMPLETE_ID);
+	if (ret < 0)
+		wl1271_error("cmd disconnect event completion error");
+
 out_free:
 	kfree(cmd);
 
diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.h b/drivers/net/wireless/wl12xx/wl1271_cmd.h
index 2dc06c73532b..f2820b42a943 100644
--- a/drivers/net/wireless/wl12xx/wl1271_cmd.h
+++ b/drivers/net/wireless/wl12xx/wl1271_cmd.h
@@ -33,7 +33,7 @@ int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
 		    size_t res_len);
 int wl1271_cmd_general_parms(struct wl1271 *wl);
 int wl1271_cmd_radio_parms(struct wl1271 *wl);
-int wl1271_cmd_join(struct wl1271 *wl);
+int wl1271_cmd_join(struct wl1271 *wl, u8 bss_type);
 int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer);
 int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len);
 int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len);
@@ -41,15 +41,18 @@ int wl1271_cmd_data_path(struct wl1271 *wl, bool enable);
 int wl1271_cmd_ps_mode(struct wl1271 *wl, u8 ps_mode, bool send);
 int wl1271_cmd_read_memory(struct wl1271 *wl, u32 addr, void *answer,
 			   size_t len);
-int wl1271_cmd_scan(struct wl1271 *wl, u8 *ssid, size_t len,
-		    u8 active_scan, u8 high_prio, u8 band,
-		    u8 probe_requests);
+int wl1271_cmd_scan(struct wl1271 *wl, const u8 *ssid, size_t ssid_len,
+		    const u8 *ie, size_t ie_len, u8 active_scan,
+		    u8 high_prio, u8 band, u8 probe_requests);
 int wl1271_cmd_template_set(struct wl1271 *wl, u16 template_id,
-			    void *buf, size_t buf_len);
+			    void *buf, size_t buf_len, int index, u32 rates);
 int wl1271_cmd_build_null_data(struct wl1271 *wl);
 int wl1271_cmd_build_ps_poll(struct wl1271 *wl, u16 aid);
-int wl1271_cmd_build_probe_req(struct wl1271 *wl, u8 *ssid, size_t ssid_len,
-			       u8 band);
+int wl1271_cmd_build_probe_req(struct wl1271 *wl,
+			       const u8 *ssid, size_t ssid_len,
+			       const u8 *ie, size_t ie_len, u8 band);
+int wl1271_build_qos_null_data(struct wl1271 *wl);
+int wl1271_cmd_build_klv_null_data(struct wl1271 *wl);
 int wl1271_cmd_set_default_wep_key(struct wl1271 *wl, u8 id);
 int wl1271_cmd_set_key(struct wl1271 *wl, u16 action, u8 id, u8 key_type,
 		       u8 key_size, const u8 *key, const u8 *addr,
@@ -99,6 +102,11 @@ enum wl1271_commands {
 
 #define MAX_CMD_PARAMS 572
 
+enum {
+	CMD_TEMPL_KLV_IDX_NULL_DATA = 0,
+	CMD_TEMPL_KLV_IDX_MAX = 4
+};
+
 enum cmd_templ {
 	CMD_TEMPL_NULL_DATA = 0,
 	CMD_TEMPL_BEACON,
@@ -121,6 +129,7 @@ enum cmd_templ {
 /* unit ms */
 #define WL1271_COMMAND_TIMEOUT     2000
 #define WL1271_CMD_TEMPL_MAX_SIZE  252
+#define WL1271_EVENT_TIMEOUT       750
 
 struct wl1271_cmd_header {
 	__le16 id;
@@ -243,6 +252,8 @@ struct cmd_enabledisable_path {
 	u8 padding[3];
 } __attribute__ ((packed));
 
+#define WL1271_RATE_AUTOMATIC  0
+
 struct wl1271_cmd_template_set {
 	struct wl1271_cmd_header header;
 
@@ -509,6 +520,8 @@ enum wl1271_disconnect_type {
 };
 
 struct wl1271_cmd_disconnect {
+	struct wl1271_cmd_header header;
+
 	__le32 rx_config_options;
 	__le32 rx_filter_options;
 
diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h
index 6f9e75cc5640..d046d044b5bd 100644
--- a/drivers/net/wireless/wl12xx/wl1271_conf.h
+++ b/drivers/net/wireless/wl12xx/wl1271_conf.h
@@ -65,110 +65,344 @@ enum {
 	CONF_HW_RATE_INDEX_MAX     = CONF_HW_RATE_INDEX_54MBPS,
 };
 
-struct conf_sg_settings {
+enum {
+	CONF_HW_RXTX_RATE_MCS7 = 0,
+	CONF_HW_RXTX_RATE_MCS6,
+	CONF_HW_RXTX_RATE_MCS5,
+	CONF_HW_RXTX_RATE_MCS4,
+	CONF_HW_RXTX_RATE_MCS3,
+	CONF_HW_RXTX_RATE_MCS2,
+	CONF_HW_RXTX_RATE_MCS1,
+	CONF_HW_RXTX_RATE_MCS0,
+	CONF_HW_RXTX_RATE_54,
+	CONF_HW_RXTX_RATE_48,
+	CONF_HW_RXTX_RATE_36,
+	CONF_HW_RXTX_RATE_24,
+	CONF_HW_RXTX_RATE_22,
+	CONF_HW_RXTX_RATE_18,
+	CONF_HW_RXTX_RATE_12,
+	CONF_HW_RXTX_RATE_11,
+	CONF_HW_RXTX_RATE_9,
+	CONF_HW_RXTX_RATE_6,
+	CONF_HW_RXTX_RATE_5_5,
+	CONF_HW_RXTX_RATE_2,
+	CONF_HW_RXTX_RATE_1,
+	CONF_HW_RXTX_RATE_MAX,
+	CONF_HW_RXTX_RATE_UNSUPPORTED = 0xff
+};
+
+enum {
+	CONF_SG_DISABLE = 0,
+	CONF_SG_PROTECTIVE,
+	CONF_SG_OPPORTUNISTIC
+};
+
+enum {
 	/*
-	 * Defines the PER threshold in PPM of the BT voice of which reaching
-	 * this value will trigger raising the priority of the BT voice by
-	 * the BT IP until next NFS sample interval time as defined in
-	 * nfs_sample_interval.
+	 * PER threshold in PPM of the BT voice
 	 *
-	 * Unit: PER value in PPM (parts per million)
-	 * #Error_packets / #Total_packets
+	 * Range: 0 - 10000000
+	 */
+	CONF_SG_BT_PER_THRESHOLD = 0,
 
-	 * Range: u32
+	/*
+	 * Number of consequent RX_ACTIVE activities to override BT voice
+	 * frames to ensure WLAN connection
+	 *
+	 * Range: 0 - 100
+	 */
+	CONF_SG_HV3_MAX_OVERRIDE,
+
+	/*
+	 * Defines the PER threshold of the BT voice
+	 *
+	 * Range: 0 - 65000
+	 */
+	CONF_SG_BT_NFS_SAMPLE_INTERVAL,
+
+	/*
+	 * Defines the load ratio of BT
+	 *
+	 * Range: 0 - 100 (%)
+	 */
+	CONF_SG_BT_LOAD_RATIO,
+
+	/*
+	 * Defines whether the SG will force WLAN host to enter/exit PSM
+	 *
+	 * Range: 1 - SG can force, 0 - host handles PSM
+	 */
+	CONF_SG_AUTO_PS_MODE,
+
+	/*
+	 * Compensation percentage of probe requests when scan initiated
+	 * during BT voice/ACL link.
+	 *
+	 * Range: 0 - 255 (%)
+	 */
+	CONF_SG_AUTO_SCAN_PROBE_REQ,
+
+	/*
+	 * Compensation percentage of probe requests when active scan initiated
+	 * during BT voice
+	 *
+	 * Range: 0 - 255 (%)
+	 */
+	CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3,
+
+	/*
+	 * Defines antenna configuration (single/dual antenna)
+	 *
+	 * Range: 0 - single antenna, 1 - dual antenna
+	 */
+	CONF_SG_ANTENNA_CONFIGURATION,
+
+	/*
+	 * The threshold (percent) of max consequtive beacon misses before
+	 * increasing priority of beacon reception.
+	 *
+	 * Range: 0 - 100 (%)
+	 */
+	CONF_SG_BEACON_MISS_PERCENT,
+
+	/*
+	 * The rate threshold below which receiving a data frame from the AP
+	 * will increase the priority of the data frame above BT traffic.
+	 *
+	 * Range: 0,2, 5(=5.5), 6, 9, 11, 12, 18, 24, 36, 48, 54
+	 */
+	CONF_SG_RATE_ADAPT_THRESH,
+
+	/*
+	 * Not used currently.
+	 *
+	 * Range: 0
+	 */
+	CONF_SG_RATE_ADAPT_SNR,
+
+	/*
+	 * Configure the min and max time BT gains the antenna
+	 * in WLAN PSM / BT master basic rate
+	 *
+	 * Range: 0 - 255 (ms)
+	 */
+	CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR,
+	CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR,
+
+	/*
+	 * The time after it expires no new WLAN trigger frame is trasmitted
+	 * in WLAN PSM / BT master basic rate
+	 *
+	 * Range: 0 - 255 (ms)
+	 */
+	CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR,
+
+	/*
+	 * Configure the min and max time BT gains the antenna
+	 * in WLAN PSM / BT slave basic rate
+	 *
+	 * Range: 0 - 255 (ms)
+	 */
+	CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR,
+	CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR,
+
+	/*
+	 * The time after it expires no new WLAN trigger frame is trasmitted
+	 * in WLAN PSM / BT slave basic rate
+	 *
+	 * Range: 0 - 255 (ms)
+	 */
+	CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR,
+
+	/*
+	 * Configure the min and max time BT gains the antenna
+	 * in WLAN PSM / BT master EDR
+	 *
+	 * Range: 0 - 255 (ms)
+	 */
+	CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR,
+	CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR,
+
+	/*
+	 * The time after it expires no new WLAN trigger frame is trasmitted
+	 * in WLAN PSM / BT master EDR
+	 *
+	 * Range: 0 - 255 (ms)
+	 */
+	CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR,
+
+	/*
+	 * Configure the min and max time BT gains the antenna
+	 * in WLAN PSM / BT slave EDR
+	 *
+	 * Range: 0 - 255 (ms)
+	 */
+	CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR,
+	CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR,
+
+	/*
+	 * The time after it expires no new WLAN trigger frame is trasmitted
+	 * in WLAN PSM / BT slave EDR
+	 *
+	 * Range: 0 - 255 (ms)
+	 */
+	CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR,
+
+	/*
+	 * RX guard time before the beginning of a new BT voice frame during
+	 * which no new WLAN trigger frame is transmitted.
+	 *
+	 * Range: 0 - 100000 (us)
+	 */
+	CONF_SG_RXT,
+
+	/*
+	 * TX guard time before the beginning of a new BT voice frame during
+	 * which no new WLAN frame is transmitted.
+	 *
+	 * Range: 0 - 100000 (us)
+	 */
+
+	CONF_SG_TXT,
+
+	/*
+	 * Enable adaptive RXT/TXT algorithm. If disabled, the host values
+	 * will be utilized.
+	 *
+	 * Range: 0 - disable, 1 - enable
+	 */
+	CONF_SG_ADAPTIVE_RXT_TXT,
+
+	/*
+	 * The used WLAN legacy service period during active BT ACL link
+	 *
+	 * Range: 0 - 255 (ms)
+	 */
+	CONF_SG_PS_POLL_TIMEOUT,
+
+	/*
+	 * The used WLAN UPSD service period during active BT ACL link
+	 *
+	 * Range: 0 - 255 (ms)
 	 */
-	u32 per_threshold;
+	CONF_SG_UPSD_TIMEOUT,
 
 	/*
-	 * This value is an absolute time in micro-seconds to limit the
-	 * maximum scan duration compensation while in SG
+	 * Configure the min and max time BT gains the antenna
+	 * in WLAN Active / BT master EDR
+	 *
+	 * Range: 0 - 255 (ms)
 	 */
-	u32 max_scan_compensation_time;
+	CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR,
+	CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR,
 
-	/* Defines the PER threshold of the BT voice of which reaching this
-	 * value will trigger raising the priority of the BT voice until next
-	 * NFS sample interval time as defined in sample_interval.
+	/*
+	 * The maximum time WLAN can gain the antenna for
+	 * in WLAN Active / BT master EDR
 	 *
-	 * Unit: msec
-	 * Range: 1-65000
+	 * Range: 0 - 255 (ms)
 	 */
-	u16 nfs_sample_interval;
+	CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR,
 
 	/*
-	 * Defines the load ratio for the BT.
-	 * The WLAN ratio is: 100 - load_ratio
+	 * Configure the min and max time BT gains the antenna
+	 * in WLAN Active / BT slave EDR
 	 *
-	 * Unit: Percent
-	 * Range: 0-100
+	 * Range: 0 - 255 (ms)
 	 */
-	u8 load_ratio;
+	CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR,
+	CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR,
 
 	/*
-	 * true - Co-ex is allowed to enter/exit P.S automatically and
-	 *        transparently to the host
+	 * The maximum time WLAN can gain the antenna for
+	 * in WLAN Active / BT slave EDR
 	 *
-	 * false - Co-ex is disallowed to enter/exit P.S and will trigger an
-	 *         event to the host to notify for the need to enter/exit P.S
-	 *         due to BT change state
+	 * Range: 0 - 255 (ms)
+	 */
+	CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR,
+
+	/*
+	 * Configure the min and max time BT gains the antenna
+	 * in WLAN Active / BT basic rate
+	 *
+	 * Range: 0 - 255 (ms)
+	 */
+	CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR,
+	CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR,
+
+	/*
+	 * The maximum time WLAN can gain the antenna for
+	 * in WLAN Active / BT basic rate
 	 *
+	 * Range: 0 - 255 (ms)
 	 */
-	u8 auto_ps_mode;
+	CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR,
 
 	/*
-	 * This parameter defines the compensation percentage of num of probe
-	 * requests in case scan is initiated during BT voice/BT ACL
-	 * guaranteed link.
+	 * Compensation percentage of WLAN passive scan window if initiated
+	 * during BT voice
 	 *
-	 * Unit: Percent
-	 * Range: 0-255 (0 - No compensation)
+	 * Range: 0 - 1000 (%)
 	 */
-	u8 probe_req_compensation;
+	CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3,
 
 	/*
-	 * This parameter defines the compensation percentage of scan window
-	 * size in case scan is initiated during BT voice/BT ACL Guaranteed
-	 * link.
+	 * Compensation percentage of WLAN passive scan window if initiated
+	 * during BT A2DP
 	 *
-	 * Unit: Percent
-	 * Range: 0-255 (0 - No compensation)
+	 * Range: 0 - 1000 (%)
 	 */
-	u8 scan_window_compensation;
+	CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP,
 
 	/*
-	 * Defines the antenna configuration.
+	 * Fixed time ensured for BT traffic to gain the antenna during WLAN
+	 * passive scan.
 	 *
-	 * Range: 0 - Single Antenna; 1 - Dual Antenna
+	 * Range: 0 - 1000 ms
 	 */
-	u8 antenna_config;
+	CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME,
 
 	/*
-	 * The percent out of the Max consecutive beacon miss roaming trigger
-	 * which is the threshold for raising the priority of beacon
-	 * reception.
+	 * Fixed time ensured for WLAN traffic to gain the antenna during WLAN
+	 * passive scan.
 	 *
-	 * Range: 1-100
-	 * N = MaxConsecutiveBeaconMiss
-	 * P = coexMaxConsecutiveBeaconMissPrecent
-	 * Threshold = MIN( N-1, round(N * P / 100))
+	 * Range: 0 - 1000 ms
 	 */
-	u8 beacon_miss_threshold;
+	CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME,
 
 	/*
-	 * The RX rate threshold below which rate adaptation is assumed to be
-	 * occurring at the AP which will raise priority for ACTIVE_RX and RX
-	 * SP.
+	 * Number of consequent BT voice frames not interrupted by WLAN
 	 *
-	 * Range: HW_BIT_RATE_*
+	 * Range: 0 - 100
 	 */
-	u32 rate_adaptation_threshold;
+	CONF_SG_HV3_MAX_SERVED,
 
 	/*
-	 * The SNR above which the RX rate threshold indicating AP rate
-	 * adaptation is valid
+	 * Protection time of the DHCP procedure.
 	 *
-	 * Range: -128 - 127
+	 * Range: 0 - 100000 (ms)
 	 */
-	s8 rate_adaptation_snr;
+	CONF_SG_DHCP_TIME,
+
+	/*
+	 * Compensation percentage of WLAN active scan window if initiated
+	 * during BT A2DP
+	 *
+	 * Range: 0 - 1000 (%)
+	 */
+	CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP,
+	CONF_SG_TEMP_PARAM_1,
+	CONF_SG_TEMP_PARAM_2,
+	CONF_SG_TEMP_PARAM_3,
+	CONF_SG_TEMP_PARAM_4,
+	CONF_SG_TEMP_PARAM_5,
+	CONF_SG_PARAMS_MAX,
+	CONF_SG_PARAMS_ALL = 0xff
+};
+
+struct conf_sg_settings {
+	u32 params[CONF_SG_PARAMS_MAX];
+	u8 state;
 };
 
 enum conf_rx_queue_type {
@@ -440,6 +674,19 @@ struct conf_tx_settings {
 	 */
 	u16 tx_compl_threshold;
 
+	/*
+	 * The rate used for control messages and scanning on the 2.4GHz band
+	 *
+	 * Range: CONF_HW_BIT_RATE_* bit mask
+	 */
+	u32 basic_rate;
+
+	/*
+	 * The rate used for control messages and scanning on the 5GHz band
+	 *
+	 * Range: CONF_HW_BIT_RATE_* bit mask
+	 */
+	u32 basic_rate_5;
 };
 
 enum {
@@ -509,65 +756,6 @@ enum {
 	CONF_TRIG_EVENT_DIR_BIDIR
 };
 
-
-struct conf_sig_trigger {
-	/*
-	 * The RSSI / SNR threshold value.
-	 *
-	 * FIXME: what is the range?
-	 */
-	s16 threshold;
-
-	/*
-	 * Minimum delay between two trigger events for this trigger in ms.
-	 *
-	 * Range: 0 - 60000
-	 */
-	u16 pacing;
-
-	/*
-	 * The measurement data source for this trigger.
-	 *
-	 * Range: CONF_TRIG_METRIC_*
-	 */
-	u8 metric;
-
-	/*
-	 * The trigger type of this trigger.
-	 *
-	 * Range: CONF_TRIG_EVENT_TYPE_*
-	 */
-	u8 type;
-
-	/*
-	 * The direction of the trigger.
-	 *
-	 * Range: CONF_TRIG_EVENT_DIR_*
-	 */
-	u8 direction;
-
-	/*
-	 * Hysteresis range of the trigger around the threshold (in dB)
-	 *
-	 * Range: u8
-	 */
-	u8 hysteresis;
-
-	/*
-	 * Index of the trigger rule.
-	 *
-	 * Range: 0 - CONF_MAX_RSSI_SNR_TRIGGERS-1
-	 */
-	u8 index;
-
-	/*
-	 * Enable / disable this rule (to use for clearing rules.)
-	 *
-	 * Range: 1 - Enabled, 2 - Not enabled
-	 */
-	u8 enable;
-};
-
 struct conf_sig_weights {
 
 	/*
@@ -686,12 +874,6 @@ struct conf_conn_settings {
 	u8 ps_poll_threshold;
 
 	/*
-	 * Configuration of signal (rssi/snr) triggers.
-	 */
-	u8 sig_trigger_count;
-	struct conf_sig_trigger sig_trigger[CONF_MAX_RSSI_SNR_TRIGGERS];
-
-	/*
 	 * Configuration of signal average weights.
 	 */
 	struct conf_sig_weights sig_weights;
@@ -721,6 +903,22 @@ struct conf_conn_settings {
 	 * Range 0 - 255
 	 */
 	u8 psm_entry_retries;
+
+	/*
+	 *
+	 * Specifies the interval of the connection keep-alive null-func
+	 * frame in ms.
+	 *
+	 * Range: 1000 - 3600000
+	 */
+	u32 keep_alive_interval;
+
+	/*
+	 * Maximum listen interval supported by the driver in units of beacons.
+	 *
+	 * Range: u16
+	 */
+	u8 max_listen_interval;
 };
 
 enum {
@@ -782,6 +980,43 @@ struct conf_pm_config_settings {
 	bool host_fast_wakeup_support;
 };
 
+struct conf_roam_trigger_settings {
+	/*
+	 * The minimum interval between two trigger events.
+	 *
+	 * Range: 0 - 60000 ms
+	 */
+	u16 trigger_pacing;
+
+	/*
+	 * The weight for rssi/beacon average calculation
+	 *
+	 * Range: 0 - 255
+	 */
+	u8 avg_weight_rssi_beacon;
+
+	/*
+	 * The weight for rssi/data frame average calculation
+	 *
+	 * Range: 0 - 255
+	 */
+	u8 avg_weight_rssi_data;
+
+	/*
+	 * The weight for snr/beacon average calculation
+	 *
+	 * Range: 0 - 255
+	 */
+	u8 avg_weight_snr_beacon;
+
+	/*
+	 * The weight for snr/data frame average calculation
+	 *
+	 * Range: 0 - 255
+	 */
+	u8 avg_weight_snr_data;
+};
+
 struct conf_drv_settings {
 	struct conf_sg_settings sg;
 	struct conf_rx_settings rx;
@@ -790,6 +1025,7 @@ struct conf_drv_settings {
 	struct conf_init_settings init;
 	struct conf_itrim_settings itrim;
 	struct conf_pm_config_settings pm_config;
+	struct conf_roam_trigger_settings roam_trigger;
 };
 
 #endif
diff --git a/drivers/net/wireless/wl12xx/wl1271_debugfs.c b/drivers/net/wireless/wl12xx/wl1271_debugfs.c
index 3f7ff8d0cf5a..c239ef4d0b8d 100644
--- a/drivers/net/wireless/wl12xx/wl1271_debugfs.c
+++ b/drivers/net/wireless/wl12xx/wl1271_debugfs.c
@@ -29,6 +29,7 @@
 #include "wl1271.h"
 #include "wl1271_acx.h"
 #include "wl1271_ps.h"
+#include "wl1271_io.h"
 
 /* ms */
 #define WL1271_DEBUGFS_STATS_LIFETIME 1000
@@ -277,13 +278,10 @@ static ssize_t gpio_power_write(struct file *file,
 		goto out;
 	}
 
-	if (value) {
-		wl->set_power(true);
-		set_bit(WL1271_FLAG_GPIO_POWER, &wl->flags);
-	} else {
-		wl->set_power(false);
-		clear_bit(WL1271_FLAG_GPIO_POWER, &wl->flags);
-	}
+	if (value)
+		wl1271_power_on(wl);
+	else
+		wl1271_power_off(wl);
 
 out:
 	mutex_unlock(&wl->mutex);
diff --git a/drivers/net/wireless/wl12xx/wl1271_event.c b/drivers/net/wireless/wl12xx/wl1271_event.c
index 7468ef10194b..cf37aa6eb137 100644
--- a/drivers/net/wireless/wl12xx/wl1271_event.c
+++ b/drivers/net/wireless/wl12xx/wl1271_event.c
@@ -23,7 +23,6 @@
 
 #include "wl1271.h"
 #include "wl1271_reg.h"
-#include "wl1271_spi.h"
 #include "wl1271_io.h"
 #include "wl1271_event.h"
 #include "wl1271_ps.h"
@@ -32,34 +31,24 @@
 static int wl1271_event_scan_complete(struct wl1271 *wl,
 				      struct event_mailbox *mbox)
 {
-	int size = sizeof(struct wl12xx_probe_req_template);
 	wl1271_debug(DEBUG_EVENT, "status: 0x%x",
 		     mbox->scheduled_scan_status);
 
 	if (test_bit(WL1271_FLAG_SCANNING, &wl->flags)) {
 		if (wl->scan.state == WL1271_SCAN_BAND_DUAL) {
-			wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_2_4,
-						NULL, size);
 			/* 2.4 GHz band scanned, scan 5 GHz band, pretend
 			 * to the wl1271_cmd_scan function that we are not
 			 * scanning as it checks that.
 			 */
 			clear_bit(WL1271_FLAG_SCANNING, &wl->flags);
+			/* FIXME: ie missing! */
 			wl1271_cmd_scan(wl, wl->scan.ssid, wl->scan.ssid_len,
+						NULL, 0,
 						wl->scan.active,
 						wl->scan.high_prio,
 						WL1271_SCAN_BAND_5_GHZ,
 						wl->scan.probe_requests);
 		} else {
-			if (wl->scan.state == WL1271_SCAN_BAND_2_4_GHZ)
-				wl1271_cmd_template_set(wl,
-						CMD_TEMPL_CFG_PROBE_REQ_2_4,
-						NULL, size);
-			else
-				wl1271_cmd_template_set(wl,
-						CMD_TEMPL_CFG_PROBE_REQ_5,
-						NULL, size);
-
 			mutex_unlock(&wl->mutex);
 			ieee80211_scan_completed(wl->hw, false);
 			mutex_lock(&wl->mutex);
@@ -92,16 +81,9 @@ static int wl1271_event_ps_report(struct wl1271 *wl,
 			ret = wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE,
 						 true);
 		} else {
-			wl1271_error("PSM entry failed, giving up.\n");
-			/* FIXME: this may need to be reconsidered. for now it
-			   is not possible to indicate to the mac80211
-			   afterwards that PSM entry failed. To maximize
-			   functionality (receiving data and remaining
-			   associated) make sure that we are in sync with the
-			   AP in regard of PSM mode. */
-			ret = wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE,
-						 false);
+			wl1271_info("No ack to nullfunc from AP.");
 			wl->psm_entry_retry = 0;
+			*beacon_loss = true;
 		}
 		break;
 	case EVENT_ENTER_POWER_SAVE_SUCCESS:
@@ -143,6 +125,24 @@ static int wl1271_event_ps_report(struct wl1271 *wl,
 	return ret;
 }
 
+static void wl1271_event_rssi_trigger(struct wl1271 *wl,
+				      struct event_mailbox *mbox)
+{
+	enum nl80211_cqm_rssi_threshold_event event;
+	s8 metric = mbox->rssi_snr_trigger_metric[0];
+
+	wl1271_debug(DEBUG_EVENT, "RSSI trigger metric: %d", metric);
+
+	if (metric <= wl->rssi_thold)
+		event = NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW;
+	else
+		event = NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH;
+
+	if (event != wl->last_rssi_event)
+		ieee80211_cqm_rssi_notify(wl->vif, event, GFP_KERNEL);
+	wl->last_rssi_event = event;
+}
+
 static void wl1271_event_mbox_dump(struct event_mailbox *mbox)
 {
 	wl1271_debug(DEBUG_EVENT, "MBOX DUMP:");
@@ -172,10 +172,13 @@ static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox)
 	 * The BSS_LOSE_EVENT_ID is only needed while psm (and hence beacon
 	 * filtering) is enabled. Without PSM, the stack will receive all
 	 * beacons and can detect beacon loss by itself.
+	 *
+	 * As there's possibility that the driver disables PSM before receiving
+	 * BSS_LOSE_EVENT, beacon loss has to be reported to the stack.
+	 *
 	 */
-	if (vector & BSS_LOSE_EVENT_ID &&
-	    test_bit(WL1271_FLAG_PSM, &wl->flags)) {
-		wl1271_debug(DEBUG_EVENT, "BSS_LOSE_EVENT");
+	if (vector & BSS_LOSE_EVENT_ID) {
+		wl1271_info("Beacon loss detected.");
 
 		/* indicate to the stack, that beacons have been lost */
 		beacon_loss = true;
@@ -188,17 +191,15 @@ static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox)
 			return ret;
 	}
 
-	if (wl->vif && beacon_loss) {
-		/* Obviously, it's dangerous to release the mutex while
-		   we are holding many of the variables in the wl struct.
-		   That's why it's done last in the function, and care must
-		   be taken that nothing more is done after this function
-		   returns. */
-		mutex_unlock(&wl->mutex);
-		ieee80211_beacon_loss(wl->vif);
-		mutex_lock(&wl->mutex);
+	if (vector & RSSI_SNR_TRIGGER_0_EVENT_ID) {
+		wl1271_debug(DEBUG_EVENT, "RSSI_SNR_TRIGGER_0_EVENT");
+		if (wl->vif)
+			wl1271_event_rssi_trigger(wl, mbox);
 	}
 
+	if (wl->vif && beacon_loss)
+		ieee80211_connection_loss(wl->vif);
+
 	return 0;
 }
 
diff --git a/drivers/net/wireless/wl12xx/wl1271_event.h b/drivers/net/wireless/wl12xx/wl1271_event.h
index 278f9206aa56..58371008f270 100644
--- a/drivers/net/wireless/wl12xx/wl1271_event.h
+++ b/drivers/net/wireless/wl12xx/wl1271_event.h
@@ -38,6 +38,14 @@
  */
 
 enum {
+	RSSI_SNR_TRIGGER_0_EVENT_ID              = BIT(0),
+	RSSI_SNR_TRIGGER_1_EVENT_ID              = BIT(1),
+	RSSI_SNR_TRIGGER_2_EVENT_ID              = BIT(2),
+	RSSI_SNR_TRIGGER_3_EVENT_ID              = BIT(3),
+	RSSI_SNR_TRIGGER_4_EVENT_ID              = BIT(4),
+	RSSI_SNR_TRIGGER_5_EVENT_ID              = BIT(5),
+	RSSI_SNR_TRIGGER_6_EVENT_ID              = BIT(6),
+	RSSI_SNR_TRIGGER_7_EVENT_ID              = BIT(7),
 	MEASUREMENT_START_EVENT_ID		 = BIT(8),
 	MEASUREMENT_COMPLETE_EVENT_ID		 = BIT(9),
 	SCAN_COMPLETE_EVENT_ID			 = BIT(10),
diff --git a/drivers/net/wireless/wl12xx/wl1271_init.c b/drivers/net/wireless/wl12xx/wl1271_init.c
index d189e8fe05a6..4447af1557f5 100644
--- a/drivers/net/wireless/wl12xx/wl1271_init.c
+++ b/drivers/net/wireless/wl12xx/wl1271_init.c
@@ -52,50 +52,65 @@ static int wl1271_init_hwenc_config(struct wl1271 *wl)
 
 int wl1271_init_templates_config(struct wl1271 *wl)
 {
-	int ret;
+	int ret, i;
 
 	/* send empty templates for fw memory reservation */
 	ret = wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_2_4, NULL,
-				      sizeof(struct wl12xx_probe_req_template));
+				      sizeof(struct wl12xx_probe_req_template),
+				      0, WL1271_RATE_AUTOMATIC);
 	if (ret < 0)
 		return ret;
 
 	if (wl1271_11a_enabled()) {
+		size_t size = sizeof(struct wl12xx_probe_req_template);
 		ret = wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_5,
-				NULL,
-				sizeof(struct wl12xx_probe_req_template));
+					      NULL, size, 0,
+					      WL1271_RATE_AUTOMATIC);
 		if (ret < 0)
 			return ret;
 	}
 
 	ret = wl1271_cmd_template_set(wl, CMD_TEMPL_NULL_DATA, NULL,
-				      sizeof(struct wl12xx_null_data_template));
+				      sizeof(struct wl12xx_null_data_template),
+				      0, WL1271_RATE_AUTOMATIC);
 	if (ret < 0)
 		return ret;
 
 	ret = wl1271_cmd_template_set(wl, CMD_TEMPL_PS_POLL, NULL,
-				      sizeof(struct wl12xx_ps_poll_template));
+				      sizeof(struct wl12xx_ps_poll_template),
+				      0, WL1271_RATE_AUTOMATIC);
 	if (ret < 0)
 		return ret;
 
 	ret = wl1271_cmd_template_set(wl, CMD_TEMPL_QOS_NULL_DATA, NULL,
 				      sizeof
-				      (struct wl12xx_qos_null_data_template));
+				      (struct wl12xx_qos_null_data_template),
+				      0, WL1271_RATE_AUTOMATIC);
 	if (ret < 0)
 		return ret;
 
 	ret = wl1271_cmd_template_set(wl, CMD_TEMPL_PROBE_RESPONSE, NULL,
 				      sizeof
-				      (struct wl12xx_probe_resp_template));
+				      (struct wl12xx_probe_resp_template),
+				      0, WL1271_RATE_AUTOMATIC);
 	if (ret < 0)
 		return ret;
 
 	ret = wl1271_cmd_template_set(wl, CMD_TEMPL_BEACON, NULL,
 				      sizeof
-				      (struct wl12xx_beacon_template));
+				      (struct wl12xx_beacon_template),
+				      0, WL1271_RATE_AUTOMATIC);
 	if (ret < 0)
 		return ret;
 
+	for (i = 0; i < CMD_TEMPL_KLV_IDX_MAX; i++) {
+		ret = wl1271_cmd_template_set(wl, CMD_TEMPL_KLV, NULL,
+					      WL1271_CMD_TEMPL_MAX_SIZE, i,
+					      WL1271_RATE_AUTOMATIC);
+		if (ret < 0)
+			return ret;
+	}
+
 	return 0;
 }
 
@@ -161,11 +176,11 @@ int wl1271_init_pta(struct wl1271 *wl)
 {
 	int ret;
 
-	ret = wl1271_acx_sg_enable(wl);
+	ret = wl1271_acx_sg_cfg(wl);
 	if (ret < 0)
 		return ret;
 
-	ret = wl1271_acx_sg_cfg(wl);
+	ret = wl1271_acx_sg_enable(wl, wl->sg_enabled);
 	if (ret < 0)
 		return ret;
 
@@ -237,7 +252,7 @@ int wl1271_hw_init(struct wl1271 *wl)
 		goto out_free_memmap;
 
 	/* Initialize connection monitoring thresholds */
-	ret = wl1271_acx_conn_monit_params(wl);
+	ret = wl1271_acx_conn_monit_params(wl, false);
 	if (ret < 0)
 		goto out_free_memmap;
 
@@ -325,6 +340,24 @@ int wl1271_hw_init(struct wl1271 *wl)
 	if (ret < 0)
 		goto out_free_memmap;
 
+	/* disable all keep-alive templates */
+	for (i = 0; i < CMD_TEMPL_KLV_IDX_MAX; i++) {
+		ret = wl1271_acx_keep_alive_config(wl, i,
+						   ACX_KEEP_ALIVE_TPL_INVALID);
+		if (ret < 0)
+			goto out_free_memmap;
+	}
+
+	/* disable the keep-alive feature */
+	ret = wl1271_acx_keep_alive_mode(wl, false);
+	if (ret < 0)
+		goto out_free_memmap;
+
+	/* Configure rssi/snr averaging weights */
+	ret = wl1271_acx_rssi_snr_avg_weights(wl);
+	if (ret < 0)
+		goto out_free_memmap;
+
 	return 0;
 
  out_free_memmap:
diff --git a/drivers/net/wireless/wl12xx/wl1271_io.c b/drivers/net/wireless/wl12xx/wl1271_io.c
index 5cd94d5666c2..c8759acef131 100644
--- a/drivers/net/wireless/wl12xx/wl1271_io.c
+++ b/drivers/net/wireless/wl12xx/wl1271_io.c
@@ -28,30 +28,29 @@
 
 #include "wl1271.h"
 #include "wl12xx_80211.h"
-#include "wl1271_spi.h"
 #include "wl1271_io.h"
 
-static int wl1271_translate_addr(struct wl1271 *wl, int addr)
+#define OCP_CMD_LOOP  32
+
+#define OCP_CMD_WRITE 0x1
+#define OCP_CMD_READ  0x2
+
+#define OCP_READY_MASK  BIT(18)
+#define OCP_STATUS_MASK (BIT(16) | BIT(17))
+
+#define OCP_STATUS_NO_RESP    0x00000
+#define OCP_STATUS_OK         0x10000
+#define OCP_STATUS_REQ_FAILED 0x20000
+#define OCP_STATUS_RESP_ERROR 0x30000
+
+void wl1271_disable_interrupts(struct wl1271 *wl)
 {
-	/*
-	 * To translate, first check to which window of addresses the
-	 * particular address belongs. Then subtract the starting address
-	 * of that window from the address. Then, add offset of the
-	 * translated region.
-	 *
-	 * The translated regions occur next to each other in physical device
-	 * memory, so just add the sizes of the preceeding address regions to
-	 * get the offset to the new region.
-	 *
-	 * Currently, only the two first regions are addressed, and the
-	 * assumption is that all addresses will fall into either of those
-	 * two.
-	 */
-	if ((addr >= wl->part.reg.start) &&
-	    (addr < wl->part.reg.start + wl->part.reg.size))
-		return addr - wl->part.reg.start + wl->part.mem.size;
-	else
-		return addr - wl->part.mem.start;
+	wl->if_ops->disable_irq(wl);
+}
+
+void wl1271_enable_interrupts(struct wl1271 *wl)
+{
+	wl->if_ops->enable_irq(wl);
 }
 
 /* Set the SPI partitions to access the chip addresses
@@ -117,54 +116,12 @@ int wl1271_set_partition(struct wl1271 *wl,
 
 void wl1271_io_reset(struct wl1271 *wl)
 {
-	wl1271_spi_reset(wl);
+	wl->if_ops->reset(wl);
 }
 
 void wl1271_io_init(struct wl1271 *wl)
 {
-	wl1271_spi_init(wl);
-}
-
-void wl1271_raw_write(struct wl1271 *wl, int addr, void *buf,
-		      size_t len, bool fixed)
-{
-	wl1271_spi_raw_write(wl, addr, buf, len, fixed);
-}
-
-void wl1271_raw_read(struct wl1271 *wl, int addr, void *buf,
-		     size_t len, bool fixed)
-{
-	wl1271_spi_raw_read(wl, addr, buf, len, fixed);
-}
-
-void wl1271_read(struct wl1271 *wl, int addr, void *buf, size_t len,
-		     bool fixed)
-{
-	int physical;
-
-	physical = wl1271_translate_addr(wl, addr);
-
-	wl1271_spi_raw_read(wl, physical, buf, len, fixed);
-}
-
-void wl1271_write(struct wl1271 *wl, int addr, void *buf, size_t len,
-		  bool fixed)
-{
-	int physical;
-
-	physical = wl1271_translate_addr(wl, addr);
-
-	wl1271_spi_raw_write(wl, physical, buf, len, fixed);
-}
-
-u32 wl1271_read32(struct wl1271 *wl, int addr)
-{
-	return wl1271_raw_read32(wl, wl1271_translate_addr(wl, addr));
-}
-
-void wl1271_write32(struct wl1271 *wl, int addr, u32 val)
-{
-	wl1271_raw_write32(wl, wl1271_translate_addr(wl, addr), val);
+	wl->if_ops->init(wl);
 }
 
 void wl1271_top_reg_write(struct wl1271 *wl, int addr, u16 val)
diff --git a/drivers/net/wireless/wl12xx/wl1271_io.h b/drivers/net/wireless/wl12xx/wl1271_io.h
index fa9a0b35788f..bc806c74c63a 100644
--- a/drivers/net/wireless/wl12xx/wl1271_io.h
+++ b/drivers/net/wireless/wl12xx/wl1271_io.h
@@ -25,44 +25,145 @@
 #ifndef __WL1271_IO_H__
 #define __WL1271_IO_H__
 
+#include "wl1271_reg.h"
+
+#define HW_ACCESS_MEMORY_MAX_RANGE	0x1FFC0
+
+#define HW_PARTITION_REGISTERS_ADDR     0x1FFC0
+#define HW_PART0_SIZE_ADDR              (HW_PARTITION_REGISTERS_ADDR)
+#define HW_PART0_START_ADDR             (HW_PARTITION_REGISTERS_ADDR + 4)
+#define HW_PART1_SIZE_ADDR              (HW_PARTITION_REGISTERS_ADDR + 8)
+#define HW_PART1_START_ADDR             (HW_PARTITION_REGISTERS_ADDR + 12)
+#define HW_PART2_SIZE_ADDR              (HW_PARTITION_REGISTERS_ADDR + 16)
+#define HW_PART2_START_ADDR             (HW_PARTITION_REGISTERS_ADDR + 20)
+#define HW_PART3_START_ADDR             (HW_PARTITION_REGISTERS_ADDR + 24)
+
+#define HW_ACCESS_REGISTER_SIZE         4
+
+#define HW_ACCESS_PRAM_MAX_RANGE	0x3c000
+
 struct wl1271;
 
+void wl1271_disable_interrupts(struct wl1271 *wl);
+void wl1271_enable_interrupts(struct wl1271 *wl);
+
 void wl1271_io_reset(struct wl1271 *wl);
 void wl1271_io_init(struct wl1271 *wl);
 
-/* Raw target IO, address is not translated */
-void wl1271_raw_write(struct wl1271 *wl, int addr, void *buf,
-		      size_t len, bool fixed);
-void wl1271_raw_read(struct wl1271 *wl, int addr, void *buf,
-		     size_t len, bool fixed);
+static inline struct device *wl1271_wl_to_dev(struct wl1271 *wl)
+{
+	return wl->if_ops->dev(wl);
+}
 
-/* Translated target IO */
-void wl1271_read(struct wl1271 *wl, int addr, void *buf, size_t len,
-		     bool fixed);
-void wl1271_write(struct wl1271 *wl, int addr, void *buf, size_t len,
-		      bool fixed);
-u32 wl1271_read32(struct wl1271 *wl, int addr);
-void wl1271_write32(struct wl1271 *wl, int addr, u32 val);
 
-/* Top Register IO */
-void wl1271_top_reg_write(struct wl1271 *wl, int addr, u16 val);
-u16 wl1271_top_reg_read(struct wl1271 *wl, int addr);
+/* Raw target IO, address is not translated */
+static inline void wl1271_raw_write(struct wl1271 *wl, int addr, void *buf,
+				    size_t len, bool fixed)
+{
+	wl->if_ops->write(wl, addr, buf, len, fixed);
+}
 
-int wl1271_set_partition(struct wl1271 *wl,
-			 struct wl1271_partition_set *p);
+static inline void wl1271_raw_read(struct wl1271 *wl, int addr, void *buf,
+				   size_t len, bool fixed)
+{
+	wl->if_ops->read(wl, addr, buf, len, fixed);
+}
 
 static inline u32 wl1271_raw_read32(struct wl1271 *wl, int addr)
 {
 	wl1271_raw_read(wl, addr, &wl->buffer_32,
 			    sizeof(wl->buffer_32), false);
 
-	return wl->buffer_32;
+	return le32_to_cpu(wl->buffer_32);
 }
 
 static inline void wl1271_raw_write32(struct wl1271 *wl, int addr, u32 val)
 {
-	wl->buffer_32 = val;
+	wl->buffer_32 = cpu_to_le32(val);
 	wl1271_raw_write(wl, addr, &wl->buffer_32,
 			     sizeof(wl->buffer_32), false);
 }
+
+/* Translated target IO */
+static inline int wl1271_translate_addr(struct wl1271 *wl, int addr)
+{
+	/*
+	 * To translate, first check to which window of addresses the
+	 * particular address belongs. Then subtract the starting address
+	 * of that window from the address. Then, add offset of the
+	 * translated region.
+	 *
+	 * The translated regions occur next to each other in physical device
+	 * memory, so just add the sizes of the preceeding address regions to
+	 * get the offset to the new region.
+	 *
+	 * Currently, only the two first regions are addressed, and the
+	 * assumption is that all addresses will fall into either of those
+	 * two.
+	 */
+	if ((addr >= wl->part.reg.start) &&
+	    (addr < wl->part.reg.start + wl->part.reg.size))
+		return addr - wl->part.reg.start + wl->part.mem.size;
+	else
+		return addr - wl->part.mem.start;
+}
+
+static inline void wl1271_read(struct wl1271 *wl, int addr, void *buf,
+			       size_t len, bool fixed)
+{
+	int physical;
+
+	physical = wl1271_translate_addr(wl, addr);
+
+	wl1271_raw_read(wl, physical, buf, len, fixed);
+}
+
+static inline void wl1271_write(struct wl1271 *wl, int addr, void *buf,
+				size_t len, bool fixed)
+{
+	int physical;
+
+	physical = wl1271_translate_addr(wl, addr);
+
+	wl1271_raw_write(wl, physical, buf, len, fixed);
+}
+
+static inline u32 wl1271_read32(struct wl1271 *wl, int addr)
+{
+	return wl1271_raw_read32(wl, wl1271_translate_addr(wl, addr));
+}
+
+static inline void wl1271_write32(struct wl1271 *wl, int addr, u32 val)
+{
+	wl1271_raw_write32(wl, wl1271_translate_addr(wl, addr), val);
+}
+
+static inline void wl1271_power_off(struct wl1271 *wl)
+{
+	wl->if_ops->power(wl, false);
+	clear_bit(WL1271_FLAG_GPIO_POWER, &wl->flags);
+}
+
+static inline void wl1271_power_on(struct wl1271 *wl)
+{
+	wl->if_ops->power(wl, true);
+	set_bit(WL1271_FLAG_GPIO_POWER, &wl->flags);
+}
+
+
+/* Top Register IO */
+void wl1271_top_reg_write(struct wl1271 *wl, int addr, u16 val);
+u16 wl1271_top_reg_read(struct wl1271 *wl, int addr);
+
+int wl1271_set_partition(struct wl1271 *wl,
+			 struct wl1271_partition_set *p);
+
+/* Functions from wl1271_main.c */
+
+int wl1271_register_hw(struct wl1271 *wl);
+void wl1271_unregister_hw(struct wl1271 *wl);
+int wl1271_init_ieee80211(struct wl1271 *wl);
+struct ieee80211_hw *wl1271_alloc_hw(void);
+int wl1271_free_hw(struct wl1271 *wl);
+
 #endif
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 65a1aeba2419..b7d9137851ac 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -22,23 +22,19 @@
  */
 
 #include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
 #include <linux/firmware.h>
 #include <linux/delay.h>
-#include <linux/irq.h>
 #include <linux/spi/spi.h>
 #include <linux/crc32.h>
 #include <linux/etherdevice.h>
 #include <linux/vmalloc.h>
-#include <linux/spi/wl12xx.h>
 #include <linux/inetdevice.h>
+#include <linux/platform_device.h>
 #include <linux/slab.h>
 
 #include "wl1271.h"
 #include "wl12xx_80211.h"
 #include "wl1271_reg.h"
-#include "wl1271_spi.h"
 #include "wl1271_io.h"
 #include "wl1271_event.h"
 #include "wl1271_tx.h"
@@ -54,17 +50,57 @@
 
 static struct conf_drv_settings default_conf = {
 	.sg = {
-		.per_threshold               = 7500,
-		.max_scan_compensation_time  = 120000,
-		.nfs_sample_interval         = 400,
-		.load_ratio                  = 50,
-		.auto_ps_mode                = 0,
-		.probe_req_compensation      = 170,
-		.scan_window_compensation    = 50,
-		.antenna_config              = 0,
-		.beacon_miss_threshold       = 60,
-		.rate_adaptation_threshold   = CONF_HW_BIT_RATE_12MBPS,
-		.rate_adaptation_snr         = 0
+		.params = {
+			[CONF_SG_BT_PER_THRESHOLD]                  = 7500,
+			[CONF_SG_HV3_MAX_OVERRIDE]                  = 0,
+			[CONF_SG_BT_NFS_SAMPLE_INTERVAL]            = 400,
+			[CONF_SG_BT_LOAD_RATIO]                     = 50,
+			[CONF_SG_AUTO_PS_MODE]                      = 0,
+			[CONF_SG_AUTO_SCAN_PROBE_REQ]               = 170,
+			[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3]   = 50,
+			[CONF_SG_ANTENNA_CONFIGURATION]             = 0,
+			[CONF_SG_BEACON_MISS_PERCENT]               = 60,
+			[CONF_SG_RATE_ADAPT_THRESH]                 = 12,
+			[CONF_SG_RATE_ADAPT_SNR]                    = 0,
+			[CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR]      = 10,
+			[CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR]      = 30,
+			[CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR]      = 8,
+			[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR]       = 20,
+			[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR]       = 50,
+			/* Note: with UPSD, this should be 4 */
+			[CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR]       = 8,
+			[CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR]     = 7,
+			[CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR]     = 25,
+			[CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR]     = 20,
+			/* Note: with UPDS, this should be 15 */
+			[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR]      = 8,
+			/* Note: with UPDS, this should be 50 */
+			[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR]      = 40,
+			/* Note: with UPDS, this should be 10 */
+			[CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR]      = 20,
+			[CONF_SG_RXT]                               = 1200,
+			[CONF_SG_TXT]                               = 1000,
+			[CONF_SG_ADAPTIVE_RXT_TXT]                  = 1,
+			[CONF_SG_PS_POLL_TIMEOUT]                   = 10,
+			[CONF_SG_UPSD_TIMEOUT]                      = 10,
+			[CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR] = 7,
+			[CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR] = 15,
+			[CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR] = 15,
+			[CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR]  = 8,
+			[CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR]  = 20,
+			[CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR]  = 15,
+			[CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR]         = 20,
+			[CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR]         = 50,
+			[CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR]         = 10,
+			[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3]  = 200,
+			[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP] = 800,
+			[CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME]         = 75,
+			[CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME]       = 15,
+			[CONF_SG_HV3_MAX_SERVED]                    = 6,
+			[CONF_SG_DHCP_TIME]                         = 5000,
+			[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP]  = 100,
+		},
+		.state = CONF_SG_PROTECTIVE,
 	},
 	.rx = {
 		.rx_msdu_life_time           = 512000,
@@ -81,8 +117,7 @@ static struct conf_drv_settings default_conf = {
 	.tx = {
 		.tx_energy_detection         = 0,
 		.rc_conf                     = {
-			.enabled_rates       = CONF_HW_BIT_RATE_1MBPS |
-					       CONF_HW_BIT_RATE_2MBPS,
+			.enabled_rates       = 0,
 			.short_retry_limit   = 10,
 			.long_retry_limit    = 10,
 			.aflags              = 0
@@ -179,11 +214,13 @@ static struct conf_drv_settings default_conf = {
 		},
 		.frag_threshold              = IEEE80211_MAX_FRAG_THRESHOLD,
 		.tx_compl_timeout            = 700,
-		.tx_compl_threshold          = 4
+		.tx_compl_threshold          = 4,
+		.basic_rate                  = CONF_HW_BIT_RATE_1MBPS,
+		.basic_rate_5                = CONF_HW_BIT_RATE_6MBPS,
 	},
 	.conn = {
 		.wake_up_event               = CONF_WAKE_UP_EVENT_DTIM,
-		.listen_interval             = 0,
+		.listen_interval             = 1,
 		.bcn_filt_mode               = CONF_BCN_FILT_MODE_ENABLED,
 		.bcn_filt_ie_count           = 1,
 		.bcn_filt_ie = {
@@ -198,38 +235,11 @@ static struct conf_drv_settings default_conf = {
 		.broadcast_timeout           = 20000,
 		.rx_broadcast_in_ps          = 1,
 		.ps_poll_threshold           = 20,
-		.sig_trigger_count           = 2,
-		.sig_trigger = {
-			[0] = {
-				.threshold   = -75,
-				.pacing      = 500,
-				.metric      = CONF_TRIG_METRIC_RSSI_BEACON,
-				.type        = CONF_TRIG_EVENT_TYPE_EDGE,
-				.direction   = CONF_TRIG_EVENT_DIR_LOW,
-				.hysteresis  = 2,
-				.index       = 0,
-				.enable      = 1
-			},
-			[1] = {
-				.threshold   = -75,
-				.pacing      = 500,
-				.metric      = CONF_TRIG_METRIC_RSSI_BEACON,
-				.type        = CONF_TRIG_EVENT_TYPE_EDGE,
-				.direction   = CONF_TRIG_EVENT_DIR_HIGH,
-				.hysteresis  = 2,
-				.index       = 1,
-				.enable      = 1
-			}
-		},
-		.sig_weights = {
-			.rssi_bcn_avg_weight = 10,
-			.rssi_pkt_avg_weight = 10,
-			.snr_bcn_avg_weight  = 10,
-			.snr_pkt_avg_weight  = 10
-		},
 		.bet_enable                  = CONF_BET_MODE_ENABLE,
 		.bet_max_consecutive         = 10,
-		.psm_entry_retries           = 3
+		.psm_entry_retries           = 3,
+		.keep_alive_interval         = 55000,
+		.max_listen_interval         = 20,
 	},
 	.init = {
 		.radioparam = {
@@ -243,9 +253,32 @@ static struct conf_drv_settings default_conf = {
 	.pm_config = {
 		.host_clk_settling_time = 5000,
 		.host_fast_wakeup_support = false
+	},
+	.roam_trigger = {
+		/* FIXME: due to firmware bug, must use value 1 for now */
+		.trigger_pacing               = 1,
+		.avg_weight_rssi_beacon       = 20,
+		.avg_weight_rssi_data         = 10,
+		.avg_weight_snr_beacon        = 20,
+		.avg_weight_snr_data          = 10
 	}
 };
 
+static void wl1271_device_release(struct device *dev)
+{
+
+}
+
+static struct platform_device wl1271_device = {
+	.name           = "wl1271",
+	.id             = -1,
+
+	/* device model insists to have a release function */
+	.dev            = {
+		.release = wl1271_device_release,
+	},
+};
+
 static LIST_HEAD(wl_list);
 
 static void wl1271_conf_init(struct wl1271 *wl)
@@ -298,7 +331,7 @@ static int wl1271_plt_init(struct wl1271 *wl)
 		goto out_free_memmap;
 
 	/* Initialize connection monitoring thresholds */
-	ret = wl1271_acx_conn_monit_params(wl);
+	ret = wl1271_acx_conn_monit_params(wl, false);
 	if (ret < 0)
 		goto out_free_memmap;
 
@@ -365,30 +398,14 @@ static int wl1271_plt_init(struct wl1271 *wl)
 	return ret;
 }
 
-static void wl1271_disable_interrupts(struct wl1271 *wl)
-{
-	disable_irq(wl->irq);
-}
-
-static void wl1271_power_off(struct wl1271 *wl)
-{
-	wl->set_power(false);
-	clear_bit(WL1271_FLAG_GPIO_POWER, &wl->flags);
-}
-
-static void wl1271_power_on(struct wl1271 *wl)
-{
-	wl->set_power(true);
-	set_bit(WL1271_FLAG_GPIO_POWER, &wl->flags);
-}
-
 static void wl1271_fw_status(struct wl1271 *wl,
 			     struct wl1271_fw_status *status)
 {
+	struct timespec ts;
 	u32 total = 0;
 	int i;
 
-	wl1271_read(wl, FW_STATUS_ADDR, status, sizeof(*status), false);
+	wl1271_raw_read(wl, FW_STATUS_ADDR, status, sizeof(*status), false);
 
 	wl1271_debug(DEBUG_IRQ, "intr: 0x%x (fw_rx_counter = %d, "
 		     "drv_rx_counter = %d, tx_results_counter = %d)",
@@ -413,14 +430,19 @@ static void wl1271_fw_status(struct wl1271 *wl,
 		ieee80211_queue_work(wl->hw, &wl->tx_work);
 
 	/* update the host-chipset time offset */
-	wl->time_offset = jiffies_to_usecs(jiffies) -
-		le32_to_cpu(status->fw_localtime);
+	getnstimeofday(&ts);
+	wl->time_offset = (timespec_to_ns(&ts) >> 10) -
+		(s64)le32_to_cpu(status->fw_localtime);
 }
 
+#define WL1271_IRQ_MAX_LOOPS 10
+
 static void wl1271_irq_work(struct work_struct *work)
 {
 	int ret;
 	u32 intr;
+	int loopcount = WL1271_IRQ_MAX_LOOPS;
+	unsigned long flags;
 	struct wl1271 *wl =
 		container_of(work, struct wl1271, irq_work);
 
@@ -428,91 +450,78 @@ static void wl1271_irq_work(struct work_struct *work)
 
 	wl1271_debug(DEBUG_IRQ, "IRQ work");
 
-	if (wl->state == WL1271_STATE_OFF)
+	if (unlikely(wl->state == WL1271_STATE_OFF))
 		goto out;
 
 	ret = wl1271_ps_elp_wakeup(wl, true);
 	if (ret < 0)
 		goto out;
 
-	wl1271_write32(wl, ACX_REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);
-
-	wl1271_fw_status(wl, wl->fw_status);
-	intr = le32_to_cpu(wl->fw_status->intr);
-	if (!intr) {
-		wl1271_debug(DEBUG_IRQ, "Zero interrupt received.");
-		goto out_sleep;
-	}
+	spin_lock_irqsave(&wl->wl_lock, flags);
+	while (test_bit(WL1271_FLAG_IRQ_PENDING, &wl->flags) && loopcount) {
+		clear_bit(WL1271_FLAG_IRQ_PENDING, &wl->flags);
+		spin_unlock_irqrestore(&wl->wl_lock, flags);
+		loopcount--;
+
+		wl1271_fw_status(wl, wl->fw_status);
+		intr = le32_to_cpu(wl->fw_status->intr);
+		if (!intr) {
+			wl1271_debug(DEBUG_IRQ, "Zero interrupt received.");
+			spin_lock_irqsave(&wl->wl_lock, flags);
+			continue;
+		}
 
-	intr &= WL1271_INTR_MASK;
+		intr &= WL1271_INTR_MASK;
 
-	if (intr & WL1271_ACX_INTR_EVENT_A) {
-		wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_EVENT_A");
-		wl1271_event_handle(wl, 0);
-	}
+		if (intr & WL1271_ACX_INTR_DATA) {
+			wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_DATA");
 
-	if (intr & WL1271_ACX_INTR_EVENT_B) {
-		wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_EVENT_B");
-		wl1271_event_handle(wl, 1);
-	}
+			/* check for tx results */
+			if (wl->fw_status->tx_results_counter !=
+			    (wl->tx_results_count & 0xff))
+				wl1271_tx_complete(wl);
 
-	if (intr & WL1271_ACX_INTR_INIT_COMPLETE)
-		wl1271_debug(DEBUG_IRQ,
-			     "WL1271_ACX_INTR_INIT_COMPLETE");
+			wl1271_rx(wl, wl->fw_status);
+		}
 
-	if (intr & WL1271_ACX_INTR_HW_AVAILABLE)
-		wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_HW_AVAILABLE");
+		if (intr & WL1271_ACX_INTR_EVENT_A) {
+			wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_EVENT_A");
+			wl1271_event_handle(wl, 0);
+		}
 
-	if (intr & WL1271_ACX_INTR_DATA) {
-		u8 tx_res_cnt = wl->fw_status->tx_results_counter -
-			wl->tx_results_count;
+		if (intr & WL1271_ACX_INTR_EVENT_B) {
+			wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_EVENT_B");
+			wl1271_event_handle(wl, 1);
+		}
 
-		wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_DATA");
+		if (intr & WL1271_ACX_INTR_INIT_COMPLETE)
+			wl1271_debug(DEBUG_IRQ,
+				     "WL1271_ACX_INTR_INIT_COMPLETE");
 
-		/* check for tx results */
-		if (tx_res_cnt)
-			wl1271_tx_complete(wl, tx_res_cnt);
+		if (intr & WL1271_ACX_INTR_HW_AVAILABLE)
+			wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_HW_AVAILABLE");
 
-		wl1271_rx(wl, wl->fw_status);
+		spin_lock_irqsave(&wl->wl_lock, flags);
 	}
 
-out_sleep:
-	wl1271_write32(wl, ACX_REG_INTERRUPT_MASK,
-		       WL1271_ACX_INTR_ALL & ~(WL1271_INTR_MASK));
+	if (test_bit(WL1271_FLAG_IRQ_PENDING, &wl->flags))
+		ieee80211_queue_work(wl->hw, &wl->irq_work);
+	else
+		clear_bit(WL1271_FLAG_IRQ_RUNNING, &wl->flags);
+	spin_unlock_irqrestore(&wl->wl_lock, flags);
+
 	wl1271_ps_elp_sleep(wl);
 
 out:
 	mutex_unlock(&wl->mutex);
 }
 
-static irqreturn_t wl1271_irq(int irq, void *cookie)
-{
-	struct wl1271 *wl;
-	unsigned long flags;
-
-	wl1271_debug(DEBUG_IRQ, "IRQ");
-
-	wl = cookie;
-
-	/* complete the ELP completion */
-	spin_lock_irqsave(&wl->wl_lock, flags);
-	if (wl->elp_compl) {
-		complete(wl->elp_compl);
-		wl->elp_compl = NULL;
-	}
-
-	ieee80211_queue_work(wl->hw, &wl->irq_work);
-	spin_unlock_irqrestore(&wl->wl_lock, flags);
-
-	return IRQ_HANDLED;
-}
-
 static int wl1271_fetch_firmware(struct wl1271 *wl)
 {
 	const struct firmware *fw;
 	int ret;
 
-	ret = request_firmware(&fw, WL1271_FW_NAME, &wl->spi->dev);
+	ret = request_firmware(&fw, WL1271_FW_NAME, wl1271_wl_to_dev(wl));
 
 	if (ret < 0) {
 		wl1271_error("could not get firmware: %d", ret);
@@ -545,46 +554,12 @@ out:
 	return ret;
 }
 
-static int wl1271_update_mac_addr(struct wl1271 *wl)
-{
-	int ret = 0;
-	u8 *nvs_ptr = (u8 *)wl->nvs->nvs;
-
-	/* get mac address from the NVS */
-	wl->mac_addr[0] = nvs_ptr[11];
-	wl->mac_addr[1] = nvs_ptr[10];
-	wl->mac_addr[2] = nvs_ptr[6];
-	wl->mac_addr[3] = nvs_ptr[5];
-	wl->mac_addr[4] = nvs_ptr[4];
-	wl->mac_addr[5] = nvs_ptr[3];
-
-	/* FIXME: if it is a zero-address, we should bail out. Now, instead,
-	   we randomize an address */
-	if (is_zero_ether_addr(wl->mac_addr)) {
-		static const u8 nokia_oui[3] = {0x00, 0x1f, 0xdf};
-		memcpy(wl->mac_addr, nokia_oui, 3);
-		get_random_bytes(wl->mac_addr + 3, 3);
-
-		/* update this address to the NVS */
-		nvs_ptr[11] = wl->mac_addr[0];
-		nvs_ptr[10] = wl->mac_addr[1];
-		nvs_ptr[6] = wl->mac_addr[2];
-		nvs_ptr[5] = wl->mac_addr[3];
-		nvs_ptr[4] = wl->mac_addr[4];
-		nvs_ptr[3] = wl->mac_addr[5];
-	}
-
-	SET_IEEE80211_PERM_ADDR(wl->hw, wl->mac_addr);
-
-	return ret;
-}
-
 static int wl1271_fetch_nvs(struct wl1271 *wl)
 {
 	const struct firmware *fw;
 	int ret;
 
-	ret = request_firmware(&fw, WL1271_NVS_NAME, &wl->spi->dev);
+	ret = request_firmware(&fw, WL1271_NVS_NAME, wl1271_wl_to_dev(wl));
 
 	if (ret < 0) {
 		wl1271_error("could not get nvs file: %d", ret);
@@ -608,8 +583,6 @@ static int wl1271_fetch_nvs(struct wl1271 *wl)
 
 	memcpy(wl->nvs, fw->data, sizeof(struct wl1271_nvs_file));
 
-	ret = wl1271_update_mac_addr(wl);
-
 out:
 	release_firmware(fw);
 
@@ -826,15 +799,13 @@ static int wl1271_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	 * The workqueue is slow to process the tx_queue and we need stop
 	 * the queue here, otherwise the queue will get too long.
 	 */
-	if (skb_queue_len(&wl->tx_queue) >= WL1271_TX_QUEUE_MAX_LENGTH) {
-		ieee80211_stop_queues(wl->hw);
+	if (skb_queue_len(&wl->tx_queue) >= WL1271_TX_QUEUE_HIGH_WATERMARK) {
+		wl1271_debug(DEBUG_TX, "op_tx: stopping queues");
 
-		/*
-		 * FIXME: this is racy, the variable is not properly
-		 * protected. Maybe fix this by removing the stupid
-		 * variable altogether and checking the real queue state?
-		 */
+		spin_lock_irqsave(&wl->wl_lock, flags);
+		ieee80211_stop_queues(wl->hw);
 		set_bit(WL1271_FLAG_TX_QUEUE_STOPPED, &wl->flags);
+		spin_unlock_irqrestore(&wl->wl_lock, flags);
 	}
 
 	return NETDEV_TX_OK;
@@ -882,7 +853,7 @@ static int wl1271_dev_notify(struct notifier_block *me, unsigned long what,
 		if (wl == wl_temp)
 			break;
 	}
-	if (wl == NULL)
+	if (wl != wl_temp)
 		return NOTIFY_DONE;
 
 	/* Get the interface IP address for the device. "ifa" will become
@@ -929,13 +900,60 @@ static struct notifier_block wl1271_dev_notifier = {
 
 static int wl1271_op_start(struct ieee80211_hw *hw)
 {
+	wl1271_debug(DEBUG_MAC80211, "mac80211 start");
+
+	/*
+	 * We have to delay the booting of the hardware because
+	 * we need to know the local MAC address before downloading and
+	 * initializing the firmware. The MAC address cannot be changed
+	 * after boot, and without the proper MAC address, the firmware
+	 * will not function properly.
+	 *
+	 * The MAC address is first known when the corresponding interface
+	 * is added. That is where we will initialize the hardware.
+	 */
+
+	return 0;
+}
+
+static void wl1271_op_stop(struct ieee80211_hw *hw)
+{
+	wl1271_debug(DEBUG_MAC80211, "mac80211 stop");
+}
+
+static int wl1271_op_add_interface(struct ieee80211_hw *hw,
+				   struct ieee80211_vif *vif)
+{
 	struct wl1271 *wl = hw->priv;
 	int retries = WL1271_BOOT_RETRIES;
 	int ret = 0;
 
-	wl1271_debug(DEBUG_MAC80211, "mac80211 start");
+	wl1271_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %pM",
+		     vif->type, vif->addr);
 
 	mutex_lock(&wl->mutex);
+	if (wl->vif) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	wl->vif = vif;
+
+	switch (vif->type) {
+	case NL80211_IFTYPE_STATION:
+		wl->bss_type = BSS_TYPE_STA_BSS;
+		wl->set_bss_type = BSS_TYPE_STA_BSS;
+		break;
+	case NL80211_IFTYPE_ADHOC:
+		wl->bss_type = BSS_TYPE_IBSS;
+		wl->set_bss_type = BSS_TYPE_STA_BSS;
+		break;
+	default:
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	memcpy(wl->mac_addr, vif->addr, ETH_ALEN);
 
 	if (wl->state != WL1271_STATE_OFF) {
 		wl1271_error("cannot start because not in off state: %d",
@@ -991,19 +1009,20 @@ out:
 	return ret;
 }
 
-static void wl1271_op_stop(struct ieee80211_hw *hw)
+static void wl1271_op_remove_interface(struct ieee80211_hw *hw,
+				       struct ieee80211_vif *vif)
 {
 	struct wl1271 *wl = hw->priv;
 	int i;
 
-	wl1271_info("down");
-
-	wl1271_debug(DEBUG_MAC80211, "mac80211 stop");
-
 	unregister_inetaddr_notifier(&wl1271_dev_notifier);
-	list_del(&wl->list);
 
 	mutex_lock(&wl->mutex);
+	wl1271_debug(DEBUG_MAC80211, "mac80211 remove interface");
+
+	wl1271_info("down");
+
+	list_del(&wl->list);
 
 	WARN_ON(wl->state != WL1271_STATE_ON);
 
@@ -1032,6 +1051,7 @@ static void wl1271_op_stop(struct ieee80211_hw *hw)
 	memset(wl->ssid, 0, IW_ESSID_MAX_SIZE + 1);
 	wl->ssid_len = 0;
 	wl->bss_type = MAX_BSS_TYPE;
+	wl->set_bss_type = MAX_BSS_TYPE;
 	wl->band = IEEE80211_BAND_2GHZ;
 
 	wl->rx_counter = 0;
@@ -1041,163 +1061,142 @@ static void wl1271_op_stop(struct ieee80211_hw *hw)
 	wl->tx_results_count = 0;
 	wl->tx_packets_count = 0;
 	wl->tx_security_last_seq = 0;
-	wl->tx_security_seq_16 = 0;
-	wl->tx_security_seq_32 = 0;
+	wl->tx_security_seq = 0;
 	wl->time_offset = 0;
 	wl->session_counter = 0;
 	wl->rate_set = CONF_TX_RATE_MASK_BASIC;
 	wl->sta_rate_set = 0;
 	wl->flags = 0;
+	wl->vif = NULL;
+	wl->filters = 0;
 
 	for (i = 0; i < NUM_TX_QUEUES; i++)
 		wl->tx_blocks_freed[i] = 0;
 
 	wl1271_debugfs_reset(wl);
+
+	kfree(wl->fw_status);
+	wl->fw_status = NULL;
+	kfree(wl->tx_res_if);
+	wl->tx_res_if = NULL;
+	kfree(wl->target_mem_map);
+	wl->target_mem_map = NULL;
+
 	mutex_unlock(&wl->mutex);
 }
 
-static int wl1271_op_add_interface(struct ieee80211_hw *hw,
-				   struct ieee80211_vif *vif)
+static void wl1271_configure_filters(struct wl1271 *wl, unsigned int filters)
 {
-	struct wl1271 *wl = hw->priv;
-	int ret = 0;
+	wl->rx_config = WL1271_DEFAULT_RX_CONFIG;
+	wl->rx_filter = WL1271_DEFAULT_RX_FILTER;
 
-	wl1271_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %pM",
-		     vif->type, vif->addr);
+	/* combine requested filters with current filter config */
+	filters = wl->filters | filters;
 
-	mutex_lock(&wl->mutex);
-	if (wl->vif) {
-		ret = -EBUSY;
-		goto out;
+	wl1271_debug(DEBUG_FILTERS, "RX filters set: ");
+
+	if (filters & FIF_PROMISC_IN_BSS) {
+		wl1271_debug(DEBUG_FILTERS, " - FIF_PROMISC_IN_BSS");
+		wl->rx_config &= ~CFG_UNI_FILTER_EN;
+		wl->rx_config |= CFG_BSSID_FILTER_EN;
+	}
+	if (filters & FIF_BCN_PRBRESP_PROMISC) {
+		wl1271_debug(DEBUG_FILTERS, " - FIF_BCN_PRBRESP_PROMISC");
+		wl->rx_config &= ~CFG_BSSID_FILTER_EN;
+		wl->rx_config &= ~CFG_SSID_FILTER_EN;
 	}
+	if (filters & FIF_OTHER_BSS) {
+		wl1271_debug(DEBUG_FILTERS, " - FIF_OTHER_BSS");
+		wl->rx_config &= ~CFG_BSSID_FILTER_EN;
+	}
+	if (filters & FIF_CONTROL) {
+		wl1271_debug(DEBUG_FILTERS, " - FIF_CONTROL");
+		wl->rx_filter |= CFG_RX_CTL_EN;
+	}
+	if (filters & FIF_FCSFAIL) {
+		wl1271_debug(DEBUG_FILTERS, " - FIF_FCSFAIL");
+		wl->rx_filter |= CFG_RX_FCS_ERROR;
+	}
+}
 
-	wl->vif = vif;
+static int wl1271_dummy_join(struct wl1271 *wl)
+{
+	int ret = 0;
+	/* we need to use a dummy BSSID for now */
+	static const u8 dummy_bssid[ETH_ALEN] = { 0x0b, 0xad, 0xde,
+						  0xad, 0xbe, 0xef };
 
-	switch (vif->type) {
-	case NL80211_IFTYPE_STATION:
-		wl->bss_type = BSS_TYPE_STA_BSS;
-		break;
-	case NL80211_IFTYPE_ADHOC:
-		wl->bss_type = BSS_TYPE_IBSS;
-		break;
-	default:
-		ret = -EOPNOTSUPP;
+	memcpy(wl->bssid, dummy_bssid, ETH_ALEN);
+
+	/* pass through frames from all BSS */
+	wl1271_configure_filters(wl, FIF_OTHER_BSS);
+
+	ret = wl1271_cmd_join(wl, wl->set_bss_type);
+	if (ret < 0)
 		goto out;
-	}
 
-	/* FIXME: what if conf->mac_addr changes? */
+	set_bit(WL1271_FLAG_JOINED, &wl->flags);
 
 out:
-	mutex_unlock(&wl->mutex);
 	return ret;
 }
 
-static void wl1271_op_remove_interface(struct ieee80211_hw *hw,
-					 struct ieee80211_vif *vif)
-{
-	struct wl1271 *wl = hw->priv;
-
-	mutex_lock(&wl->mutex);
-	wl1271_debug(DEBUG_MAC80211, "mac80211 remove interface");
-	wl->vif = NULL;
-	mutex_unlock(&wl->mutex);
-}
-
-#if 0
-static int wl1271_op_config_interface(struct ieee80211_hw *hw,
-				      struct ieee80211_vif *vif,
-				      struct ieee80211_if_conf *conf)
+static int wl1271_join(struct wl1271 *wl, bool set_assoc)
 {
-	struct wl1271 *wl = hw->priv;
-	struct sk_buff *beacon;
 	int ret;
 
-	wl1271_debug(DEBUG_MAC80211, "mac80211 config_interface bssid %pM",
-		     conf->bssid);
-	wl1271_dump_ascii(DEBUG_MAC80211, "ssid: ", conf->ssid,
-			  conf->ssid_len);
+	/*
+	 * One of the side effects of the JOIN command is that is clears
+	 * WPA/WPA2 keys from the chipset. Performing a JOIN while associated
+	 * to a WPA/WPA2 access point will therefore kill the data-path.
+	 * Currently there is no supported scenario for JOIN during
+	 * association - if it becomes a supported scenario, the WPA/WPA2 keys
+	 * must be handled somehow.
+	 *
+	 */
+	if (test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags))
+		wl1271_info("JOIN while associated.");
 
-	mutex_lock(&wl->mutex);
+	if (set_assoc)
+		set_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags);
 
-	ret = wl1271_ps_elp_wakeup(wl, false);
+	ret = wl1271_cmd_join(wl, wl->set_bss_type);
 	if (ret < 0)
 		goto out;
 
-	if (memcmp(wl->bssid, conf->bssid, ETH_ALEN)) {
-		wl1271_debug(DEBUG_MAC80211, "bssid changed");
-
-		memcpy(wl->bssid, conf->bssid, ETH_ALEN);
-
-		ret = wl1271_cmd_join(wl);
-		if (ret < 0)
-			goto out_sleep;
-
-		ret = wl1271_cmd_build_null_data(wl);
-		if (ret < 0)
-			goto out_sleep;
-	}
-
-	wl->ssid_len = conf->ssid_len;
-	if (wl->ssid_len)
-		memcpy(wl->ssid, conf->ssid, wl->ssid_len);
-
-	if (conf->changed & IEEE80211_IFCC_BEACON) {
-		beacon = ieee80211_beacon_get(hw, vif);
-		ret = wl1271_cmd_template_set(wl, CMD_TEMPL_BEACON,
-					      beacon->data, beacon->len);
-
-		if (ret < 0) {
-			dev_kfree_skb(beacon);
-			goto out_sleep;
-		}
-
-		ret = wl1271_cmd_template_set(wl, CMD_TEMPL_PROBE_RESPONSE,
-					      beacon->data, beacon->len);
-
-		dev_kfree_skb(beacon);
-
-		if (ret < 0)
-			goto out_sleep;
-	}
-
-out_sleep:
-	wl1271_ps_elp_sleep(wl);
-
-out:
-	mutex_unlock(&wl->mutex);
-
-	return ret;
-}
-#endif
-
-static int wl1271_join_channel(struct wl1271 *wl, int channel)
-{
-	int ret = 0;
-	/* we need to use a dummy BSSID for now */
-	static const u8 dummy_bssid[ETH_ALEN] = { 0x0b, 0xad, 0xde,
-						  0xad, 0xbe, 0xef };
+	set_bit(WL1271_FLAG_JOINED, &wl->flags);
 
-	/* the dummy join is not required for ad-hoc */
-	if (wl->bss_type == BSS_TYPE_IBSS)
+	if (!test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags))
 		goto out;
 
-	/* disable mac filter, so we hear everything */
-	wl->rx_config &= ~CFG_BSSID_FILTER_EN;
+	/*
+	 * The join command disable the keep-alive mode, shut down its process,
+	 * and also clear the template config, so we need to reset it all after
+	 * the join. The acx_aid starts the keep-alive process, and the order
+	 * of the commands below is relevant.
+	 */
+	ret = wl1271_acx_keep_alive_mode(wl, true);
+	if (ret < 0)
+		goto out;
 
-	wl->channel = channel;
-	memcpy(wl->bssid, dummy_bssid, ETH_ALEN);
+	ret = wl1271_acx_aid(wl, wl->aid);
+	if (ret < 0)
+		goto out;
 
-	ret = wl1271_cmd_join(wl);
+	ret = wl1271_cmd_build_klv_null_data(wl);
 	if (ret < 0)
 		goto out;
 
-	set_bit(WL1271_FLAG_JOINED, &wl->flags);
+	ret = wl1271_acx_keep_alive_config(wl, CMD_TEMPL_KLV_IDX_NULL_DATA,
+					   ACX_KEEP_ALIVE_TPL_VALID);
+	if (ret < 0)
+		goto out;
 
 out:
 	return ret;
 }
 
-static int wl1271_unjoin_channel(struct wl1271 *wl)
+static int wl1271_unjoin(struct wl1271 *wl)
 {
 	int ret;
 
@@ -1207,14 +1206,41 @@ static int wl1271_unjoin_channel(struct wl1271 *wl)
 		goto out;
 
 	clear_bit(WL1271_FLAG_JOINED, &wl->flags);
-	wl->channel = 0;
 	memset(wl->bssid, 0, ETH_ALEN);
-	wl->rx_config = WL1271_DEFAULT_RX_CONFIG;
+
+	/* stop filterting packets based on bssid */
+	wl1271_configure_filters(wl, FIF_OTHER_BSS);
 
 out:
 	return ret;
 }
 
+static void wl1271_set_band_rate(struct wl1271 *wl)
+{
+	if (wl->band == IEEE80211_BAND_2GHZ)
+		wl->basic_rate_set = wl->conf.tx.basic_rate;
+	else
+		wl->basic_rate_set = wl->conf.tx.basic_rate_5;
+}
+
+static u32 wl1271_min_rate_get(struct wl1271 *wl)
+{
+	int i;
+	u32 rate = 0;
+
+	if (!wl->basic_rate_set) {
+		WARN_ON(1);
+		wl->basic_rate_set = wl->conf.tx.basic_rate;
+	}
+
+	for (i = 0; !rate; i++) {
+		if ((wl->basic_rate_set >> i) & 0x1)
+			rate = 1 << i;
+	}
+
+	return rate;
+}
+
 static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed)
 {
 	struct wl1271 *wl = hw->priv;
@@ -1231,38 +1257,62 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed)
 
 	mutex_lock(&wl->mutex);
 
-	wl->band = conf->channel->band;
+	if (unlikely(wl->state == WL1271_STATE_OFF))
+		goto out;
 
 	ret = wl1271_ps_elp_wakeup(wl, false);
 	if (ret < 0)
 		goto out;
 
+	/* if the channel changes while joined, join again */
+	if (changed & IEEE80211_CONF_CHANGE_CHANNEL &&
+	    ((wl->band != conf->channel->band) ||
+	     (wl->channel != channel))) {
+		wl->band = conf->channel->band;
+		wl->channel = channel;
+
+		/*
+		 * FIXME: the mac80211 should really provide a fixed rate
+		 * to use here. for now, just use the smallest possible rate
+		 * for the band as a fixed rate for association frames and
+		 * other control messages.
+		 */
+		if (!test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags))
+			wl1271_set_band_rate(wl);
+
+		wl->basic_rate = wl1271_min_rate_get(wl);
+		ret = wl1271_acx_rate_policies(wl);
+		if (ret < 0)
+			wl1271_warning("rate policy for update channel "
+				       "failed %d", ret);
+
+		if (test_bit(WL1271_FLAG_JOINED, &wl->flags)) {
+			ret = wl1271_join(wl, false);
+			if (ret < 0)
+				wl1271_warning("cmd join to update channel "
+					       "failed %d", ret);
+		}
+	}
+
 	if (changed & IEEE80211_CONF_CHANGE_IDLE) {
 		if (conf->flags & IEEE80211_CONF_IDLE &&
 		    test_bit(WL1271_FLAG_JOINED, &wl->flags))
-			wl1271_unjoin_channel(wl);
+			wl1271_unjoin(wl);
 		else if (!(conf->flags & IEEE80211_CONF_IDLE))
-			wl1271_join_channel(wl, channel);
+			wl1271_dummy_join(wl);
 
 		if (conf->flags & IEEE80211_CONF_IDLE) {
-			wl->rate_set = CONF_TX_RATE_MASK_BASIC;
+			wl->rate_set = wl1271_min_rate_get(wl);
 			wl->sta_rate_set = 0;
 			wl1271_acx_rate_policies(wl);
-		}
+			wl1271_acx_keep_alive_config(
+				wl, CMD_TEMPL_KLV_IDX_NULL_DATA,
+				ACX_KEEP_ALIVE_TPL_INVALID);
+			set_bit(WL1271_FLAG_IDLE, &wl->flags);
+		} else
+			clear_bit(WL1271_FLAG_IDLE, &wl->flags);
 	}
 
-	/* if the channel changes while joined, join again */
-	if (channel != wl->channel &&
-	    test_bit(WL1271_FLAG_JOINED, &wl->flags)) {
-		wl->channel = channel;
-		/* FIXME: maybe use CMD_CHANNEL_SWITCH for this? */
-		ret = wl1271_cmd_join(wl);
-		if (ret < 0)
-			wl1271_warning("cmd join to update channel failed %d",
-				       ret);
-	} else
-		wl->channel = channel;
-
 	if (conf->flags & IEEE80211_CONF_PS &&
 	    !test_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags)) {
 		set_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags);
@@ -1273,13 +1323,13 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed)
 		 * through the bss_info_changed() hook.
 		 */
 		if (test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags)) {
-			wl1271_info("psm enabled");
+			wl1271_debug(DEBUG_PSM, "psm enabled");
 			ret = wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE,
 						 true);
 		}
 	} else if (!(conf->flags & IEEE80211_CONF_PS) &&
 		   test_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags)) {
-		wl1271_info("psm disabled");
+		wl1271_debug(DEBUG_PSM, "psm disabled");
 
 		clear_bit(WL1271_FLAG_PSM_REQUESTED, &wl->flags);
 
@@ -1311,11 +1361,15 @@ struct wl1271_filter_params {
 	u8 mc_list[ACX_MC_ADDRESS_GROUP_MAX][ETH_ALEN];
 };
 
-static u64 wl1271_op_prepare_multicast(struct ieee80211_hw *hw, int mc_count,
-				       struct dev_addr_list *mc_list)
+static u64 wl1271_op_prepare_multicast(struct ieee80211_hw *hw,
+				       struct netdev_hw_addr_list *mc_list)
 {
 	struct wl1271_filter_params *fp;
-	int i;
+	struct netdev_hw_addr *ha;
+	struct wl1271 *wl = hw->priv;
+
+	if (unlikely(wl->state == WL1271_STATE_OFF))
+		return 0;
 
 	fp = kzalloc(sizeof(*fp), GFP_ATOMIC);
 	if (!fp) {
@@ -1324,21 +1378,16 @@ static u64 wl1271_op_prepare_multicast(struct ieee80211_hw *hw, int mc_count,
 	}
 
 	/* update multicast filtering parameters */
-	fp->enabled = true;
-	if (mc_count > ACX_MC_ADDRESS_GROUP_MAX) {
-		mc_count = 0;
-		fp->enabled = false;
-	}
-
 	fp->mc_list_length = 0;
-	for (i = 0; i < mc_count; i++) {
-		if (mc_list->da_addrlen == ETH_ALEN) {
+	if (netdev_hw_addr_list_count(mc_list) > ACX_MC_ADDRESS_GROUP_MAX) {
+		fp->enabled = false;
+	} else {
+		fp->enabled = true;
+		netdev_hw_addr_list_for_each(ha, mc_list) {
 			memcpy(fp->mc_list[fp->mc_list_length],
-			       mc_list->da_addr, ETH_ALEN);
+					ha->addr, ETH_ALEN);
 			fp->mc_list_length++;
-		} else
-			wl1271_warning("Unknown mc address length.");
-		mc_list = mc_list->next;
+		}
 	}
 
 	return (u64)(unsigned long)fp;
@@ -1363,15 +1412,16 @@ static void wl1271_op_configure_filter(struct ieee80211_hw *hw,
 
 	mutex_lock(&wl->mutex);
 
-	if (wl->state == WL1271_STATE_OFF)
+	*total &= WL1271_SUPPORTED_FILTERS;
+	changed &= WL1271_SUPPORTED_FILTERS;
+
+	if (unlikely(wl->state == WL1271_STATE_OFF))
 		goto out;
 
 	ret = wl1271_ps_elp_wakeup(wl, false);
 	if (ret < 0)
 		goto out;
 
-	*total &= WL1271_SUPPORTED_FILTERS;
-	changed &= WL1271_SUPPORTED_FILTERS;
 
 	if (*total & FIF_ALLMULTI)
 		ret = wl1271_acx_group_address_tbl(wl, false, NULL, 0);
@@ -1382,14 +1432,14 @@ static void wl1271_op_configure_filter(struct ieee80211_hw *hw,
 	if (ret < 0)
 		goto out_sleep;
 
-	kfree(fp);
-
-	/* FIXME: We still need to set our filters properly */
-
 	/* determine, whether supported filter values have changed */
 	if (changed == 0)
 		goto out_sleep;
 
+	/* configure filters */
+	wl->filters = *total;
+	wl1271_configure_filters(wl, 0);
+
 	/* apply configured filters */
 	ret = wl1271_acx_rx_config(wl, wl->rx_config, wl->rx_filter);
 	if (ret < 0)
@@ -1400,6 +1450,7 @@ out_sleep:
 
 out:
 	mutex_unlock(&wl->mutex);
+	kfree(fp);
 }
 
 static int wl1271_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
@@ -1450,15 +1501,15 @@ static int wl1271_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 		key_type = KEY_TKIP;
 
 		key_conf->hw_key_idx = key_conf->keyidx;
-		tx_seq_32 = wl->tx_security_seq_32;
-		tx_seq_16 = wl->tx_security_seq_16;
+		tx_seq_32 = WL1271_TX_SECURITY_HI32(wl->tx_security_seq);
+		tx_seq_16 = WL1271_TX_SECURITY_LO16(wl->tx_security_seq);
 		break;
 	case ALG_CCMP:
 		key_type = KEY_AES;
 
 		key_conf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
-		tx_seq_32 = wl->tx_security_seq_32;
-		tx_seq_16 = wl->tx_security_seq_16;
+		tx_seq_32 = WL1271_TX_SECURITY_HI32(wl->tx_security_seq);
+		tx_seq_16 = WL1271_TX_SECURITY_LO16(wl->tx_security_seq);
 		break;
 	default:
 		wl1271_error("Unknown key algo 0x%x", key_conf->alg);
@@ -1508,8 +1559,6 @@ static int wl1271_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	default:
 		wl1271_error("Unsupported key cmd 0x%x", cmd);
 		ret = -EOPNOTSUPP;
-		goto out_sleep;
-
 		break;
 	}
 
@@ -1524,6 +1573,7 @@ out:
 }
 
 static int wl1271_op_hw_scan(struct ieee80211_hw *hw,
+			     struct ieee80211_vif *vif,
 			     struct cfg80211_scan_request *req)
 {
 	struct wl1271 *wl = hw->priv;
@@ -1545,10 +1595,12 @@ static int wl1271_op_hw_scan(struct ieee80211_hw *hw,
 		goto out;
 
 	if (wl1271_11a_enabled())
-		ret = wl1271_cmd_scan(hw->priv, ssid, len, 1, 0,
+		ret = wl1271_cmd_scan(hw->priv, ssid, len,
+				      req->ie, req->ie_len, 1, 0,
 				      WL1271_SCAN_BAND_DUAL, 3);
 	else
-		ret = wl1271_cmd_scan(hw->priv, ssid, len, 1, 0,
+		ret = wl1271_cmd_scan(hw->priv, ssid, len,
+				      req->ie, req->ie_len, 1, 0,
 				      WL1271_SCAN_BAND_2_4_GHZ, 3);
 
 	wl1271_ps_elp_sleep(wl);
@@ -1562,10 +1614,13 @@ out:
 static int wl1271_op_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
 {
 	struct wl1271 *wl = hw->priv;
-	int ret;
+	int ret = 0;
 
 	mutex_lock(&wl->mutex);
 
+	if (unlikely(wl->state == WL1271_STATE_OFF))
+		goto out;
+
 	ret = wl1271_ps_elp_wakeup(wl, false);
 	if (ret < 0)
 		goto out;
@@ -1607,6 +1662,7 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 	enum wl1271_cmd_ps_mode mode;
 	struct wl1271 *wl = hw->priv;
 	bool do_join = false;
+	bool set_assoc = false;
 	int ret;
 
 	wl1271_debug(DEBUG_MAC80211, "mac80211 bss info changed");
@@ -1617,20 +1673,29 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 	if (ret < 0)
 		goto out;
 
-	if (wl->bss_type == BSS_TYPE_IBSS) {
-		/* FIXME: This implements rudimentary ad-hoc support -
-		   proper templates are on the wish list and notification
-		   on when they change. This patch will update the templates
-		   on every call to this function. */
+	if ((changed && BSS_CHANGED_BEACON_INT) &&
+	    (wl->bss_type == BSS_TYPE_IBSS)) {
+		wl1271_debug(DEBUG_ADHOC, "ad-hoc beacon interval updated: %d",
+			bss_conf->beacon_int);
+
+		wl->beacon_int = bss_conf->beacon_int;
+		do_join = true;
+	}
+
+	if ((changed && BSS_CHANGED_BEACON) &&
+	    (wl->bss_type == BSS_TYPE_IBSS)) {
 		struct sk_buff *beacon = ieee80211_beacon_get(hw, vif);
 
+		wl1271_debug(DEBUG_ADHOC, "ad-hoc beacon updated");
+
 		if (beacon) {
 			struct ieee80211_hdr *hdr;
 
 			wl1271_ssid_set(wl, beacon);
 			ret = wl1271_cmd_template_set(wl, CMD_TEMPL_BEACON,
 						      beacon->data,
-						      beacon->len);
+						      beacon->len, 0,
+						      wl1271_min_rate_get(wl));
 
 			if (ret < 0) {
 				dev_kfree_skb(beacon);
@@ -1645,7 +1710,8 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 			ret = wl1271_cmd_template_set(wl,
 						      CMD_TEMPL_PROBE_RESPONSE,
 						      beacon->data,
-						      beacon->len);
+						      beacon->len, 0,
+						      wl1271_min_rate_get(wl));
 			dev_kfree_skb(beacon);
 			if (ret < 0)
 				goto out_sleep;
@@ -1655,20 +1721,48 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 		}
 	}
 
+	if ((changed & BSS_CHANGED_BEACON_ENABLED) &&
+	    (wl->bss_type == BSS_TYPE_IBSS)) {
+		wl1271_debug(DEBUG_ADHOC, "ad-hoc beaconing: %s",
+			     bss_conf->enable_beacon ? "enabled" : "disabled");
+
+		if (bss_conf->enable_beacon)
+			wl->set_bss_type = BSS_TYPE_IBSS;
+		else
+			wl->set_bss_type = BSS_TYPE_STA_BSS;
+		do_join = true;
+	}
+
+	if (changed & BSS_CHANGED_CQM) {
+		bool enable = false;
+		if (bss_conf->cqm_rssi_thold)
+			enable = true;
+		ret = wl1271_acx_rssi_snr_trigger(wl, enable,
+						  bss_conf->cqm_rssi_thold,
+						  bss_conf->cqm_rssi_hyst);
+		if (ret < 0)
+			goto out;
+		wl->rssi_thold = bss_conf->cqm_rssi_thold;
+	}
+
 	if ((changed & BSS_CHANGED_BSSID) &&
 	    /*
 	     * Now we know the correct bssid, so we send a new join command
 	     * and enable the BSSID filter
 	     */
 	    memcmp(wl->bssid, bss_conf->bssid, ETH_ALEN)) {
-			wl->rx_config |= CFG_BSSID_FILTER_EN;
 			memcpy(wl->bssid, bss_conf->bssid, ETH_ALEN);
+
 			ret = wl1271_cmd_build_null_data(wl);
-			if (ret < 0) {
-				wl1271_warning("cmd buld null data failed %d",
-					       ret);
+			if (ret < 0)
+				goto out_sleep;
+
+			ret = wl1271_build_qos_null_data(wl);
+			if (ret < 0)
 				goto out_sleep;
-			}
+
+			/* filter out all packets not from this BSSID */
+			wl1271_configure_filters(wl, 0);
 
 			/* Need to update the BSSID (for filtering etc) */
 			do_join = true;
@@ -1676,8 +1770,21 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 
 	if (changed & BSS_CHANGED_ASSOC) {
 		if (bss_conf->assoc) {
+			u32 rates;
 			wl->aid = bss_conf->aid;
-			set_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags);
+			set_assoc = true;
+
+			/*
+			 * use basic rates from AP, and determine lowest rate
+			 * to use with control frames.
+			 */
+			rates = bss_conf->basic_rates;
+			wl->basic_rate_set = wl1271_tx_enabled_rates_get(wl,
+									 rates);
+			wl->basic_rate = wl1271_min_rate_get(wl);
+			ret = wl1271_acx_rate_policies(wl);
+			if (ret < 0)
+				goto out_sleep;
 
 			/*
 			 * with wl1271, we don't need to update the
@@ -1689,7 +1796,17 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 			if (ret < 0)
 				goto out_sleep;
 
-			ret = wl1271_acx_aid(wl, wl->aid);
+			/*
+			 * The SSID is intentionally set to NULL here - the
+			 * firmware will set the probe request with a
+			 * broadcast SSID regardless of what we set in the
+			 * template.
+			 */
+			ret = wl1271_cmd_build_probe_req(wl, NULL, 0,
+							 NULL, 0, wl->band);
+
+			/* enable the connection monitoring feature */
+			ret = wl1271_acx_conn_monit_params(wl, true);
 			if (ret < 0)
 				goto out_sleep;
 
@@ -1705,6 +1822,22 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 			/* use defaults when not associated */
 			clear_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags);
 			wl->aid = 0;
+
+			/* revert back to minimum rates for the current band */
+			wl1271_set_band_rate(wl);
+			wl->basic_rate = wl1271_min_rate_get(wl);
+			ret = wl1271_acx_rate_policies(wl);
+			if (ret < 0)
+				goto out_sleep;
+
+			/* disable connection monitor features */
+			ret = wl1271_acx_conn_monit_params(wl, false);
+
+			/* Disable the keep-alive feature */
+			ret = wl1271_acx_keep_alive_mode(wl, false);
+
+			if (ret < 0)
+				goto out_sleep;
 		}
 
 	}
@@ -1739,12 +1872,11 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 	}
 
 	if (do_join) {
-		ret = wl1271_cmd_join(wl);
+		ret = wl1271_join(wl, set_assoc);
 		if (ret < 0) {
 			wl1271_warning("cmd join failed %d", ret);
 			goto out_sleep;
 		}
-		set_bit(WL1271_FLAG_JOINED, &wl->flags);
 	}
 
 out_sleep:
@@ -1758,6 +1890,7 @@ static int wl1271_op_conf_tx(struct ieee80211_hw *hw, u16 queue,
 			     const struct ieee80211_tx_queue_params *params)
 {
 	struct wl1271 *wl = hw->priv;
+	u8 ps_scheme;
 	int ret;
 
 	mutex_lock(&wl->mutex);
@@ -1768,17 +1901,22 @@ static int wl1271_op_conf_tx(struct ieee80211_hw *hw, u16 queue,
 	if (ret < 0)
 		goto out;
 
+	/* the txop is confed in units of 32us by the mac80211, we need us */
 	ret = wl1271_acx_ac_cfg(wl, wl1271_tx_get_queue(queue),
 				params->cw_min, params->cw_max,
-				params->aifs, params->txop);
+				params->aifs, params->txop << 5);
 	if (ret < 0)
 		goto out_sleep;
 
+	if (params->uapsd)
+		ps_scheme = CONF_PS_SCHEME_UPSD_TRIGGER;
+	else
+		ps_scheme = CONF_PS_SCHEME_LEGACY;
+
 	ret = wl1271_acx_tid_cfg(wl, wl1271_tx_get_queue(queue),
 				 CONF_CHANNEL_TYPE_EDCF,
 				 wl1271_tx_get_queue(queue),
-				 CONF_PS_SCHEME_LEGACY_PSPOLL,
-				 CONF_ACK_POLICY_LEGACY, 0, 0);
+				 ps_scheme, CONF_ACK_POLICY_LEGACY, 0, 0);
 	if (ret < 0)
 		goto out_sleep;
 
@@ -1852,6 +1990,36 @@ static struct ieee80211_channel wl1271_channels[] = {
 	{ .hw_value = 13, .center_freq = 2472, .max_power = 25 },
 };
 
+/* mapping to indexes for wl1271_rates */
+const static u8 wl1271_rate_to_idx_2ghz[] = {
+	/* MCS rates are used only with 11n */
+	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS7 */
+	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS6 */
+	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS5 */
+	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS4 */
+	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS3 */
+	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS2 */
+	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS1 */
+	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS0 */
+
+	11,                            /* CONF_HW_RXTX_RATE_54   */
+	10,                            /* CONF_HW_RXTX_RATE_48   */
+	9,                             /* CONF_HW_RXTX_RATE_36   */
+	8,                             /* CONF_HW_RXTX_RATE_24   */
+
+	/* TI-specific rate */
+	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_22   */
+
+	7,                             /* CONF_HW_RXTX_RATE_18   */
+	6,                             /* CONF_HW_RXTX_RATE_12   */
+	3,                             /* CONF_HW_RXTX_RATE_11   */
+	5,                             /* CONF_HW_RXTX_RATE_9    */
+	4,                             /* CONF_HW_RXTX_RATE_6    */
+	2,                             /* CONF_HW_RXTX_RATE_5_5  */
+	1,                             /* CONF_HW_RXTX_RATE_2    */
+	0                              /* CONF_HW_RXTX_RATE_1    */
+};
+
 /* can't be const, mac80211 writes to this */
 static struct ieee80211_supported_band wl1271_band_2ghz = {
 	.channels = wl1271_channels,
@@ -1934,6 +2102,35 @@ static struct ieee80211_channel wl1271_channels_5ghz[] = {
 	{ .hw_value = 165, .center_freq = 5825},
 };
 
+/* mapping to indexes for wl1271_rates_5ghz */
+const static u8 wl1271_rate_to_idx_5ghz[] = {
+	/* MCS rates are used only with 11n */
+	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS7 */
+	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS6 */
+	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS5 */
+	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS4 */
+	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS3 */
+	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS2 */
+	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS1 */
+	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_MCS0 */
+
+	7,                             /* CONF_HW_RXTX_RATE_54   */
+	6,                             /* CONF_HW_RXTX_RATE_48   */
+	5,                             /* CONF_HW_RXTX_RATE_36   */
+	4,                             /* CONF_HW_RXTX_RATE_24   */
+
+	/* TI-specific rate */
+	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_22   */
+
+	3,                             /* CONF_HW_RXTX_RATE_18   */
+	2,                             /* CONF_HW_RXTX_RATE_12   */
+	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_11   */
+	1,                             /* CONF_HW_RXTX_RATE_9    */
+	0,                             /* CONF_HW_RXTX_RATE_6    */
+	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_5_5  */
+	CONF_HW_RXTX_RATE_UNSUPPORTED, /* CONF_HW_RXTX_RATE_2    */
+	CONF_HW_RXTX_RATE_UNSUPPORTED  /* CONF_HW_RXTX_RATE_1    */
+};
 
 static struct ieee80211_supported_band wl1271_band_5ghz = {
 	.channels = wl1271_channels_5ghz,
@@ -1942,13 +2139,17 @@ static struct ieee80211_supported_band wl1271_band_5ghz = {
 	.n_bitrates = ARRAY_SIZE(wl1271_rates_5ghz),
 };
 
+const static u8 *wl1271_band_rate_to_idx[] = {
+	[IEEE80211_BAND_2GHZ] = wl1271_rate_to_idx_2ghz,
+	[IEEE80211_BAND_5GHZ] = wl1271_rate_to_idx_5ghz
+};
+
 static const struct ieee80211_ops wl1271_ops = {
 	.start = wl1271_op_start,
 	.stop = wl1271_op_stop,
 	.add_interface = wl1271_op_add_interface,
 	.remove_interface = wl1271_op_remove_interface,
 	.config = wl1271_op_config,
-/* 	.config_interface = wl1271_op_config_interface, */
 	.prepare_multicast = wl1271_op_prepare_multicast,
 	.configure_filter = wl1271_op_configure_filter,
 	.tx = wl1271_op_tx,
@@ -1960,7 +2161,113 @@ static const struct ieee80211_ops wl1271_ops = {
 	CFG80211_TESTMODE_CMD(wl1271_tm_cmd)
 };
 
-static int wl1271_register_hw(struct wl1271 *wl)
+
+u8 wl1271_rate_to_idx(struct wl1271 *wl, int rate)
+{
+	u8 idx;
+
+	BUG_ON(wl->band >= sizeof(wl1271_band_rate_to_idx)/sizeof(u8 *));
+
+	if (unlikely(rate >= CONF_HW_RXTX_RATE_MAX)) {
+		wl1271_error("Illegal RX rate from HW: %d", rate);
+		return 0;
+	}
+
+	idx = wl1271_band_rate_to_idx[wl->band][rate];
+	if (unlikely(idx == CONF_HW_RXTX_RATE_UNSUPPORTED)) {
+		wl1271_error("Unsupported RX rate from HW: %d", rate);
+		return 0;
+	}
+
+	return idx;
+}
+
+static ssize_t wl1271_sysfs_show_bt_coex_state(struct device *dev,
+					       struct device_attribute *attr,
+					       char *buf)
+{
+	struct wl1271 *wl = dev_get_drvdata(dev);
+	ssize_t len;
+
+	/* FIXME: what's the maximum length of buf? page size?*/
+	len = 500;
+
+	mutex_lock(&wl->mutex);
+	len = snprintf(buf, len, "%d\n\n0 - off\n1 - on\n",
+		       wl->sg_enabled);
+	mutex_unlock(&wl->mutex);
+
+	return len;
+
+}
+
+static ssize_t wl1271_sysfs_store_bt_coex_state(struct device *dev,
+						struct device_attribute *attr,
+						const char *buf, size_t count)
+{
+	struct wl1271 *wl = dev_get_drvdata(dev);
+	unsigned long res;
+	int ret;
+
+	ret = strict_strtoul(buf, 10, &res);
+
+	if (ret < 0) {
+		wl1271_warning("incorrect value written to bt_coex_mode");
+		return count;
+	}
+
+	mutex_lock(&wl->mutex);
+
+	res = !!res;
+
+	if (res == wl->sg_enabled)
+		goto out;
+
+	wl->sg_enabled = res;
+
+	if (wl->state == WL1271_STATE_OFF)
+		goto out;
+
+	ret = wl1271_ps_elp_wakeup(wl, false);
+	if (ret < 0)
+		goto out;
+
+	wl1271_acx_sg_enable(wl, wl->sg_enabled);
+	wl1271_ps_elp_sleep(wl);
+
+ out:
+	mutex_unlock(&wl->mutex);
+	return count;
+}
+
+static DEVICE_ATTR(bt_coex_state, S_IRUGO | S_IWUSR,
+		   wl1271_sysfs_show_bt_coex_state,
+		   wl1271_sysfs_store_bt_coex_state);
+
+static ssize_t wl1271_sysfs_show_hw_pg_ver(struct device *dev,
+					   struct device_attribute *attr,
+					   char *buf)
+{
+	struct wl1271 *wl = dev_get_drvdata(dev);
+	ssize_t len;
+
+	/* FIXME: what's the maximum length of buf? page size?*/
+	len = 500;
+
+	mutex_lock(&wl->mutex);
+	if (wl->hw_pg_ver >= 0)
+		len = snprintf(buf, len, "%d\n", wl->hw_pg_ver);
+	else
+		len = snprintf(buf, len, "n/a\n");
+	mutex_unlock(&wl->mutex);
+
+	return len;
+}
+
+static DEVICE_ATTR(hw_pg_ver, S_IRUGO | S_IWUSR,
+		   wl1271_sysfs_show_hw_pg_ver, NULL);
+
+int wl1271_register_hw(struct wl1271 *wl)
 {
 	int ret;
 
@@ -1981,8 +2288,17 @@ static int wl1271_register_hw(struct wl1271 *wl)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(wl1271_register_hw);
+
+void wl1271_unregister_hw(struct wl1271 *wl)
+{
+	ieee80211_unregister_hw(wl->hw);
+	wl->mac80211_registered = false;
+
+}
+EXPORT_SYMBOL_GPL(wl1271_unregister_hw);
 
-static int wl1271_init_ieee80211(struct wl1271 *wl)
+int wl1271_init_ieee80211(struct wl1271 *wl)
 {
 	/* The tx descriptor buffer and the TKIP space. */
 	wl->hw->extra_tx_headroom = WL1271_TKIP_IV_SPACE +
@@ -1991,11 +2307,15 @@ static int wl1271_init_ieee80211(struct wl1271 *wl)
 	/* unit us */
 	/* FIXME: find a proper value */
 	wl->hw->channel_change_time = 10000;
+	wl->hw->max_listen_interval = wl->conf.conn.max_listen_interval;
 
 	wl->hw->flags = IEEE80211_HW_SIGNAL_DBM |
-		IEEE80211_HW_NOISE_DBM |
 		IEEE80211_HW_BEACON_FILTER |
-		IEEE80211_HW_SUPPORTS_PS;
+		IEEE80211_HW_SUPPORTS_PS |
+		IEEE80211_HW_SUPPORTS_UAPSD |
+		IEEE80211_HW_HAS_RATE_CONTROL |
+		IEEE80211_HW_CONNECTION_MONITOR |
+		IEEE80211_HW_SUPPORTS_CQM_RSSI;
 
 	wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
 		BIT(NL80211_IFTYPE_ADHOC);
@@ -2005,51 +2325,53 @@ static int wl1271_init_ieee80211(struct wl1271 *wl)
 	if (wl1271_11a_enabled())
 		wl->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &wl1271_band_5ghz;
 
-	SET_IEEE80211_DEV(wl->hw, &wl->spi->dev);
+	wl->hw->queues = 4;
+	wl->hw->max_rates = 1;
 
-	return 0;
-}
-
-static void wl1271_device_release(struct device *dev)
-{
+	SET_IEEE80211_DEV(wl->hw, wl1271_wl_to_dev(wl));
 
+	return 0;
 }
-
-static struct platform_device wl1271_device = {
-	.name           = "wl1271",
-	.id             = -1,
-
-	/* device model insists to have a release function */
-	.dev            = {
-		.release = wl1271_device_release,
-	},
-};
+EXPORT_SYMBOL_GPL(wl1271_init_ieee80211);
 
 #define WL1271_DEFAULT_CHANNEL 0
 
-static struct ieee80211_hw *wl1271_alloc_hw(void)
+struct ieee80211_hw *wl1271_alloc_hw(void)
 {
 	struct ieee80211_hw *hw;
+	struct platform_device *plat_dev = NULL;
 	struct wl1271 *wl;
-	int i;
+	int i, ret;
 
 	hw = ieee80211_alloc_hw(sizeof(*wl), &wl1271_ops);
 	if (!hw) {
 		wl1271_error("could not alloc ieee80211_hw");
-		return ERR_PTR(-ENOMEM);
+		ret = -ENOMEM;
+		goto err_hw_alloc;
+	}
+
+	plat_dev = kmalloc(sizeof(wl1271_device), GFP_KERNEL);
+	if (!plat_dev) {
+		wl1271_error("could not allocate platform_device");
+		ret = -ENOMEM;
+		goto err_plat_alloc;
 	}
 
+	memcpy(plat_dev, &wl1271_device, sizeof(wl1271_device));
+
 	wl = hw->priv;
 	memset(wl, 0, sizeof(*wl));
 
 	INIT_LIST_HEAD(&wl->list);
 
 	wl->hw = hw;
+	wl->plat_dev = plat_dev;
 
 	skb_queue_head_init(&wl->tx_queue);
 
 	INIT_DELAYED_WORK(&wl->elp_work, wl1271_elp_work);
 	wl->channel = WL1271_DEFAULT_CHANNEL;
+	wl->beacon_int = WL1271_DEFAULT_BEACON_INT;
 	wl->default_key = 0;
 	wl->rx_counter = 0;
 	wl->rx_config = WL1271_DEFAULT_RX_CONFIG;
@@ -2057,11 +2379,14 @@ static struct ieee80211_hw *wl1271_alloc_hw(void)
 	wl->psm_entry_retry = 0;
 	wl->power_level = WL1271_DEFAULT_POWER_LEVEL;
 	wl->basic_rate_set = CONF_TX_RATE_MASK_BASIC;
+	wl->basic_rate = CONF_TX_RATE_MASK_BASIC;
 	wl->rate_set = CONF_TX_RATE_MASK_BASIC;
 	wl->sta_rate_set = 0;
 	wl->band = IEEE80211_BAND_2GHZ;
 	wl->vif = NULL;
 	wl->flags = 0;
+	wl->sg_enabled = true;
+	wl->hw_pg_ver = -1;
 
 	for (i = 0; i < ACX_TX_DESCRIPTORS; i++)
 		wl->tx_frames[i] = NULL;
@@ -2074,167 +2399,72 @@ static struct ieee80211_hw *wl1271_alloc_hw(void)
 	/* Apply default driver configuration. */
 	wl1271_conf_init(wl);
 
-	return hw;
-}
-
-int wl1271_free_hw(struct wl1271 *wl)
-{
-	ieee80211_unregister_hw(wl->hw);
-
-	wl1271_debugfs_exit(wl);
-
-	kfree(wl->target_mem_map);
-	vfree(wl->fw);
-	wl->fw = NULL;
-	kfree(wl->nvs);
-	wl->nvs = NULL;
-
-	kfree(wl->fw_status);
-	kfree(wl->tx_res_if);
-
-	ieee80211_free_hw(wl->hw);
-
-	return 0;
-}
-
-static int __devinit wl1271_probe(struct spi_device *spi)
-{
-	struct wl12xx_platform_data *pdata;
-	struct ieee80211_hw *hw;
-	struct wl1271 *wl;
-	int ret;
+	wl1271_debugfs_init(wl);
 
-	pdata = spi->dev.platform_data;
-	if (!pdata) {
-		wl1271_error("no platform data");
-		return -ENODEV;
+	/* Register platform device */
+	ret = platform_device_register(wl->plat_dev);
+	if (ret) {
+		wl1271_error("couldn't register platform device");
+		goto err_hw;
 	}
+	dev_set_drvdata(&wl->plat_dev->dev, wl);
 
-	hw = wl1271_alloc_hw();
-	if (IS_ERR(hw))
-		return PTR_ERR(hw);
-
-	wl = hw->priv;
-
-	dev_set_drvdata(&spi->dev, wl);
-	wl->spi = spi;
-
-	/* This is the only SPI value that we need to set here, the rest
-	 * comes from the board-peripherals file */
-	spi->bits_per_word = 32;
-
-	ret = spi_setup(spi);
+	/* Create sysfs file to control bt coex state */
+	ret = device_create_file(&wl->plat_dev->dev, &dev_attr_bt_coex_state);
 	if (ret < 0) {
-		wl1271_error("spi_setup failed");
-		goto out_free;
-	}
-
-	wl->set_power = pdata->set_power;
-	if (!wl->set_power) {
-		wl1271_error("set power function missing in platform data");
-		ret = -ENODEV;
-		goto out_free;
+		wl1271_error("failed to create sysfs file bt_coex_state");
+		goto err_platform;
 	}
 
-	wl->irq = spi->irq;
-	if (wl->irq < 0) {
-		wl1271_error("irq missing in platform data");
-		ret = -ENODEV;
-		goto out_free;
-	}
-
-	ret = request_irq(wl->irq, wl1271_irq, 0, DRIVER_NAME, wl);
+	/* Create sysfs file to get HW PG version */
+	ret = device_create_file(&wl->plat_dev->dev, &dev_attr_hw_pg_ver);
 	if (ret < 0) {
-		wl1271_error("request_irq() failed: %d", ret);
-		goto out_free;
-	}
-
-	set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING);
-
-	disable_irq(wl->irq);
-
-	ret = platform_device_register(&wl1271_device);
-	if (ret) {
-		wl1271_error("couldn't register platform device");
-		goto out_irq;
+		wl1271_error("failed to create sysfs file hw_pg_ver");
+		goto err_bt_coex_state;
 	}
-	dev_set_drvdata(&wl1271_device.dev, wl);
-
-	ret = wl1271_init_ieee80211(wl);
-	if (ret)
-		goto out_platform;
-
-	ret = wl1271_register_hw(wl);
-	if (ret)
-		goto out_platform;
-
-	wl1271_debugfs_init(wl);
 
-	wl1271_notice("initialized");
+	return hw;
 
-	return 0;
+err_bt_coex_state:
+	device_remove_file(&wl->plat_dev->dev, &dev_attr_bt_coex_state);
 
- out_platform:
-	platform_device_unregister(&wl1271_device);
+err_platform:
+	platform_device_unregister(wl->plat_dev);
 
- out_irq:
-	free_irq(wl->irq, wl);
+err_hw:
+	wl1271_debugfs_exit(wl);
+	kfree(plat_dev);
 
- out_free:
+err_plat_alloc:
 	ieee80211_free_hw(hw);
 
-	return ret;
-}
-
-static int __devexit wl1271_remove(struct spi_device *spi)
-{
-	struct wl1271 *wl = dev_get_drvdata(&spi->dev);
+err_hw_alloc:
 
-	platform_device_unregister(&wl1271_device);
-	free_irq(wl->irq, wl);
-
-	wl1271_free_hw(wl);
-
-	return 0;
+	return ERR_PTR(ret);
 }
+EXPORT_SYMBOL_GPL(wl1271_alloc_hw);
 
-
-static struct spi_driver wl1271_spi_driver = {
-	.driver = {
-		.name		= "wl1271",
-		.bus		= &spi_bus_type,
-		.owner		= THIS_MODULE,
-	},
-
-	.probe		= wl1271_probe,
-	.remove		= __devexit_p(wl1271_remove),
-};
-
-static int __init wl1271_init(void)
+int wl1271_free_hw(struct wl1271 *wl)
 {
-	int ret;
+	platform_device_unregister(wl->plat_dev);
+	kfree(wl->plat_dev);
 
-	ret = spi_register_driver(&wl1271_spi_driver);
-	if (ret < 0) {
-		wl1271_error("failed to register spi driver: %d", ret);
-		goto out;
-	}
+	wl1271_debugfs_exit(wl);
 
-out:
-	return ret;
-}
+	vfree(wl->fw);
+	wl->fw = NULL;
+	kfree(wl->nvs);
+	wl->nvs = NULL;
 
-static void __exit wl1271_exit(void)
-{
-	spi_unregister_driver(&wl1271_spi_driver);
+	kfree(wl->fw_status);
+	kfree(wl->tx_res_if);
 
-	wl1271_notice("unloaded");
-}
+	ieee80211_free_hw(wl->hw);
 
-module_init(wl1271_init);
-module_exit(wl1271_exit);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(wl1271_free_hw);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Luciano Coelho <luciano.coelho@nokia.com>");
 MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>");
-MODULE_FIRMWARE(WL1271_FW_NAME);
diff --git a/drivers/net/wireless/wl12xx/wl1271_ps.c b/drivers/net/wireless/wl12xx/wl1271_ps.c
index e2b1ebf096e8..a5e60e0403e5 100644
--- a/drivers/net/wireless/wl12xx/wl1271_ps.c
+++ b/drivers/net/wireless/wl12xx/wl1271_ps.c
@@ -23,7 +23,6 @@
 
 #include "wl1271_reg.h"
 #include "wl1271_ps.h"
-#include "wl1271_spi.h"
 #include "wl1271_io.h"
 
 #define WL1271_WAKEUP_TIMEOUT 500
@@ -41,7 +40,8 @@ void wl1271_elp_work(struct work_struct *work)
 	mutex_lock(&wl->mutex);
 
 	if (test_bit(WL1271_FLAG_IN_ELP, &wl->flags) ||
-	    !test_bit(WL1271_FLAG_PSM, &wl->flags))
+	    (!test_bit(WL1271_FLAG_PSM, &wl->flags) &&
+	     !test_bit(WL1271_FLAG_IDLE, &wl->flags)))
 		goto out;
 
 	wl1271_debug(DEBUG_PSM, "chip to elp");
@@ -57,7 +57,8 @@ out:
 /* Routines to toggle sleep mode while in ELP */
 void wl1271_ps_elp_sleep(struct wl1271 *wl)
 {
-	if (test_bit(WL1271_FLAG_PSM, &wl->flags)) {
+	if (test_bit(WL1271_FLAG_PSM, &wl->flags) ||
+	    test_bit(WL1271_FLAG_IDLE, &wl->flags)) {
 		cancel_delayed_work(&wl->elp_work);
 		ieee80211_queue_delayed_work(wl->hw, &wl->elp_work,
 					msecs_to_jiffies(ELP_ENTRY_DELAY));
diff --git a/drivers/net/wireless/wl12xx/wl1271_rx.c b/drivers/net/wireless/wl12xx/wl1271_rx.c
index c723d9c7e131..57f4bfd959c8 100644
--- a/drivers/net/wireless/wl12xx/wl1271_rx.c
+++ b/drivers/net/wireless/wl12xx/wl1271_rx.c
@@ -27,7 +27,6 @@
 #include "wl1271_acx.h"
 #include "wl1271_reg.h"
 #include "wl1271_rx.h"
-#include "wl1271_spi.h"
 #include "wl1271_io.h"
 
 static u8 wl1271_rx_get_mem_block(struct wl1271_fw_status *status,
@@ -44,66 +43,6 @@ static u32 wl1271_rx_get_buf_size(struct wl1271_fw_status *status,
 		RX_BUF_SIZE_MASK) >> RX_BUF_SIZE_SHIFT_DIV;
 }
 
-/* The values of this table must match the wl1271_rates[] array */
-static u8 wl1271_rx_rate_to_idx[] = {
-	/* MCS rates are used only with 11n */
-	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS7 */
-	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS6 */
-	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS5 */
-	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS4 */
-	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS3 */
-	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS2 */
-	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS1 */
-	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS0 */
-
-	11,                         /* WL1271_RATE_54   */
-	10,                         /* WL1271_RATE_48   */
-	9,                          /* WL1271_RATE_36   */
-	8,                          /* WL1271_RATE_24   */
-
-	/* TI-specific rate */
-	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_22   */
-
-	7,                          /* WL1271_RATE_18   */
-	6,                          /* WL1271_RATE_12   */
-	3,                          /* WL1271_RATE_11   */
-	5,                          /* WL1271_RATE_9    */
-	4,                          /* WL1271_RATE_6    */
-	2,                          /* WL1271_RATE_5_5  */
-	1,                          /* WL1271_RATE_2    */
-	0                           /* WL1271_RATE_1    */
-};
-
-/* The values of this table must match the wl1271_rates[] array */
-static u8 wl1271_5_ghz_rx_rate_to_idx[] = {
-	/* MCS rates are used only with 11n */
-	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS7 */
-	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS6 */
-	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS5 */
-	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS4 */
-	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS3 */
-	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS2 */
-	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS1 */
-	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS0 */
-
-	7,                          /* WL1271_RATE_54   */
-	6,                          /* WL1271_RATE_48   */
-	5,                          /* WL1271_RATE_36   */
-	4,                          /* WL1271_RATE_24   */
-
-	/* TI-specific rate */
-	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_22   */
-
-	3,                          /* WL1271_RATE_18   */
-	2,                          /* WL1271_RATE_12   */
-	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_11   */
-	1,                          /* WL1271_RATE_9    */
-	0,                          /* WL1271_RATE_6    */
-	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_5_5  */
-	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_2    */
-	WL1271_RX_RATE_UNSUPPORTED  /* WL1271_RATE_1    */
-};
-
 static void wl1271_rx_status(struct wl1271 *wl,
 			     struct wl1271_rx_descriptor *desc,
 			     struct ieee80211_rx_status *status,
@@ -111,20 +50,8 @@ static void wl1271_rx_status(struct wl1271 *wl,
 {
 	memset(status, 0, sizeof(struct ieee80211_rx_status));
 
-	if ((desc->flags & WL1271_RX_DESC_BAND_MASK) ==
-	    WL1271_RX_DESC_BAND_BG) {
-		status->band = IEEE80211_BAND_2GHZ;
-		status->rate_idx = wl1271_rx_rate_to_idx[desc->rate];
-	} else if ((desc->flags & WL1271_RX_DESC_BAND_MASK) ==
-		 WL1271_RX_DESC_BAND_A) {
-		status->band = IEEE80211_BAND_5GHZ;
-		status->rate_idx = wl1271_5_ghz_rx_rate_to_idx[desc->rate];
-	} else
-		wl1271_warning("unsupported band 0x%x",
-			       desc->flags & WL1271_RX_DESC_BAND_MASK);
-
-	if (unlikely(status->rate_idx == WL1271_RX_RATE_UNSUPPORTED))
-		wl1271_warning("unsupported rate");
+	status->band = wl->band;
+	status->rate_idx = wl1271_rate_to_idx(wl, desc->rate);
 
 	/*
 	 * FIXME: Add mactime handling.  For IBSS (ad-hoc) we need to get the
@@ -134,13 +61,6 @@ static void wl1271_rx_status(struct wl1271 *wl,
 	 */
 	status->signal = desc->rssi;
 
-	/*
-	 * FIXME: In wl1251, the SNR should be divided by two.  In wl1271 we
-	 * need to divide by two for now, but TI has been discussing about
-	 * changing it.  This needs to be rechecked.
-	 */
-	status->noise = desc->rssi - (desc->snr >> 1);
-
 	status->freq = ieee80211_channel_to_frequency(desc->channel);
 
 	if (desc->flags & WL1271_RX_DESC_ENCRYPT_MASK) {
@@ -162,6 +82,13 @@ static void wl1271_rx_handle_data(struct wl1271 *wl, u32 length)
 	u8 *buf;
 	u8 beacon = 0;
 
+	/*
+	 * In PLT mode we seem to get frames and mac80211 warns about them,
+	 * workaround this by not retrieving them at all.
+	 */
+	if (unlikely(wl->state == WL1271_STATE_PLT))
+		return;
+
 	skb = __dev_alloc_skb(length, GFP_KERNEL);
 	if (!skb) {
 		wl1271_error("Couldn't allocate RX frame");
@@ -220,6 +147,7 @@ void wl1271_rx(struct wl1271 *wl, struct wl1271_fw_status *status)
 
 		wl->rx_counter++;
 		drv_rx_counter = wl->rx_counter & NUM_RX_PKT_DESC_MOD_MASK;
-		wl1271_write32(wl, RX_DRIVER_COUNTER_ADDRESS, wl->rx_counter);
 	}
+
+	wl1271_write32(wl, RX_DRIVER_COUNTER_ADDRESS, wl->rx_counter);
 }
diff --git a/drivers/net/wireless/wl12xx/wl1271_rx.h b/drivers/net/wireless/wl12xx/wl1271_rx.h
index 1ae6d1783ed4..b89be4758e78 100644
--- a/drivers/net/wireless/wl12xx/wl1271_rx.h
+++ b/drivers/net/wireless/wl12xx/wl1271_rx.h
@@ -43,7 +43,6 @@
 #define RX_MAX_PACKET_ID 3
 
 #define NUM_RX_PKT_DESC_MOD_MASK   7
-#define WL1271_RX_RATE_UNSUPPORTED 0xFF
 
 #define RX_DESC_VALID_FCS         0x0001
 #define RX_DESC_MATCH_RXADDR1     0x0002
@@ -117,5 +116,6 @@ struct wl1271_rx_descriptor {
 } __attribute__ ((packed));
 
 void wl1271_rx(struct wl1271 *wl, struct wl1271_fw_status *status);
+u8 wl1271_rate_to_idx(struct wl1271 *wl, int rate);
 
 #endif
diff --git a/drivers/net/wireless/wl12xx/wl1271_sdio.c b/drivers/net/wireless/wl12xx/wl1271_sdio.c
new file mode 100644
index 000000000000..d3d6f302f705
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1271_sdio.c
@@ -0,0 +1,291 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2009-2010 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/crc7.h>
+#include <linux/vmalloc.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/mmc/sdio_ids.h>
+#include <linux/mmc/card.h>
+#include <plat/gpio.h>
+
+#include "wl1271.h"
+#include "wl12xx_80211.h"
+#include "wl1271_io.h"
+
+
+#define RX71_WL1271_IRQ_GPIO		42
+
+#ifndef SDIO_VENDOR_ID_TI
+#define SDIO_VENDOR_ID_TI		0x0097
+#endif
+
+#ifndef SDIO_DEVICE_ID_TI_WL1271
+#define SDIO_DEVICE_ID_TI_WL1271	0x4076
+#endif
+
+static const struct sdio_device_id wl1271_devices[] = {
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_WL1271) },
+	{}
+};
+MODULE_DEVICE_TABLE(sdio, wl1271_devices);
+
+static inline struct sdio_func *wl_to_func(struct wl1271 *wl)
+{
+	return wl->if_priv;
+}
+
+static struct device *wl1271_sdio_wl_to_dev(struct wl1271 *wl)
+{
+	return &(wl_to_func(wl)->dev);
+}
+
+static irqreturn_t wl1271_irq(int irq, void *cookie)
+{
+	struct wl1271 *wl = cookie;
+	unsigned long flags;
+
+	wl1271_debug(DEBUG_IRQ, "IRQ");
+
+	/* complete the ELP completion */
+	spin_lock_irqsave(&wl->wl_lock, flags);
+	if (wl->elp_compl) {
+		complete(wl->elp_compl);
+		wl->elp_compl = NULL;
+	}
+
+	if (!test_and_set_bit(WL1271_FLAG_IRQ_RUNNING, &wl->flags))
+		ieee80211_queue_work(wl->hw, &wl->irq_work);
+	set_bit(WL1271_FLAG_IRQ_PENDING, &wl->flags);
+	spin_unlock_irqrestore(&wl->wl_lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+static void wl1271_sdio_disable_interrupts(struct wl1271 *wl)
+{
+	disable_irq(wl->irq);
+}
+
+static void wl1271_sdio_enable_interrupts(struct wl1271 *wl)
+{
+	enable_irq(wl->irq);
+}
+
+static void wl1271_sdio_reset(struct wl1271 *wl)
+{
+}
+
+static void wl1271_sdio_init(struct wl1271 *wl)
+{
+}
+
+static void wl1271_sdio_raw_read(struct wl1271 *wl, int addr, void *buf,
+				 size_t len, bool fixed)
+{
+	int ret;
+	struct sdio_func *func = wl_to_func(wl);
+
+	if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG_ADDR)) {
+		((u8 *)buf)[0] = sdio_f0_readb(func, addr, &ret);
+		wl1271_debug(DEBUG_SDIO, "sdio read 52 addr 0x%x, byte 0x%02x",
+			     addr, ((u8 *)buf)[0]);
+	} else {
+		if (fixed)
+			ret = sdio_readsb(func, buf, addr, len);
+		else
+			ret = sdio_memcpy_fromio(func, buf, addr, len);
+
+		wl1271_debug(DEBUG_SDIO, "sdio read 53 addr 0x%x, %zu bytes",
+			     addr, len);
+		wl1271_dump_ascii(DEBUG_SDIO, "data: ", buf, len);
+	}
+
+	if (ret)
+		wl1271_error("sdio read failed (%d)", ret);
+
+}
+
+static void wl1271_sdio_raw_write(struct wl1271 *wl, int addr, void *buf,
+				  size_t len, bool fixed)
+{
+	int ret;
+	struct sdio_func *func = wl_to_func(wl);
+
+	if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG_ADDR)) {
+		sdio_f0_writeb(func, ((u8 *)buf)[0], addr, &ret);
+		wl1271_debug(DEBUG_SDIO, "sdio write 52 addr 0x%x, byte 0x%02x",
+			     addr, ((u8 *)buf)[0]);
+	} else {
+		wl1271_debug(DEBUG_SDIO, "sdio write 53 addr 0x%x, %zu bytes",
+			     addr, len);
+		wl1271_dump_ascii(DEBUG_SDIO, "data: ", buf, len);
+
+		if (fixed)
+			ret = sdio_writesb(func, addr, buf, len);
+		else
+			ret = sdio_memcpy_toio(func, addr, buf, len);
+	}
+	if (ret)
+		wl1271_error("sdio write failed (%d)", ret);
+
+}
+
+static void wl1271_sdio_set_power(struct wl1271 *wl, bool enable)
+{
+	struct sdio_func *func = wl_to_func(wl);
+
+	/* Let the SDIO stack handle wlan_enable control, so we
+	 * keep host claimed while wlan is in use to keep wl1271
+	 * alive.
+	 */
+	if (enable) {
+		sdio_claim_host(func);
+		sdio_enable_func(func);
+	} else {
+		sdio_disable_func(func);
+		sdio_release_host(func);
+	}
+}
+
+static struct wl1271_if_operations sdio_ops = {
+	.read		= wl1271_sdio_raw_read,
+	.write		= wl1271_sdio_raw_write,
+	.reset		= wl1271_sdio_reset,
+	.init		= wl1271_sdio_init,
+	.power		= wl1271_sdio_set_power,
+	.dev		= wl1271_sdio_wl_to_dev,
+	.enable_irq	= wl1271_sdio_enable_interrupts,
+	.disable_irq	= wl1271_sdio_disable_interrupts
+};
+
+static int __devinit wl1271_probe(struct sdio_func *func,
+				  const struct sdio_device_id *id)
+{
+	struct ieee80211_hw *hw;
+	struct wl1271 *wl;
+	int ret;
+
+	/* We are only able to handle the wlan function */
+	if (func->num != 0x02)
+		return -ENODEV;
+
+	hw = wl1271_alloc_hw();
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+
+	wl = hw->priv;
+
+	wl->if_priv = func;
+	wl->if_ops = &sdio_ops;
+
+	/* Grab access to FN0 for ELP reg. */
+	func->card->quirks |= MMC_QUIRK_LENIENT_FN0;
+
+	wl->irq = gpio_to_irq(RX71_WL1271_IRQ_GPIO);
+	if (wl->irq < 0) {
+		ret = wl->irq;
+		wl1271_error("could not get irq!");
+		goto out_free;
+	}
+
+	ret = request_irq(wl->irq, wl1271_irq, 0, DRIVER_NAME, wl);
+	if (ret < 0) {
+		wl1271_error("request_irq() failed: %d", ret);
+		goto out_free;
+	}
+
+	set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING);
+
+	disable_irq(wl->irq);
+
+	ret = wl1271_init_ieee80211(wl);
+	if (ret)
+		goto out_irq;
+
+	ret = wl1271_register_hw(wl);
+	if (ret)
+		goto out_irq;
+
+	sdio_set_drvdata(func, wl);
+
+	wl1271_notice("initialized");
+
+	return 0;
+
+ out_irq:
+	free_irq(wl->irq, wl);
+
+
+ out_free:
+	wl1271_free_hw(wl);
+
+	return ret;
+}
+
+static void __devexit wl1271_remove(struct sdio_func *func)
+{
+	struct wl1271 *wl = sdio_get_drvdata(func);
+
+	free_irq(wl->irq, wl);
+
+	wl1271_unregister_hw(wl);
+	wl1271_free_hw(wl);
+}
+
+static struct sdio_driver wl1271_sdio_driver = {
+	.name		= "wl1271_sdio",
+	.id_table	= wl1271_devices,
+	.probe		= wl1271_probe,
+	.remove		= __devexit_p(wl1271_remove),
+};
+
+static int __init wl1271_init(void)
+{
+	int ret;
+
+	ret = sdio_register_driver(&wl1271_sdio_driver);
+	if (ret < 0) {
+		wl1271_error("failed to register sdio driver: %d", ret);
+		goto out;
+	}
+
+out:
+	return ret;
+}
+
+static void __exit wl1271_exit(void)
+{
+	sdio_unregister_driver(&wl1271_sdio_driver);
+
+	wl1271_notice("unloaded");
+}
+
+module_init(wl1271_init);
+module_exit(wl1271_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Luciano Coelho <luciano.coelho@nokia.com>");
+MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>");
+MODULE_FIRMWARE(WL1271_FW_NAME);
diff --git a/drivers/net/wireless/wl12xx/wl1271_spi.c b/drivers/net/wireless/wl12xx/wl1271_spi.c
index 053c84aceb49..5189b812f939 100644
--- a/drivers/net/wireless/wl12xx/wl1271_spi.c
+++ b/drivers/net/wireless/wl12xx/wl1271_spi.c
@@ -21,18 +21,69 @@
  *
  */
 
+#include <linux/irq.h>
 #include <linux/module.h>
-#include <linux/platform_device.h>
 #include <linux/crc7.h>
 #include <linux/spi/spi.h>
+#include <linux/spi/wl12xx.h>
 #include <linux/slab.h>
 
 #include "wl1271.h"
 #include "wl12xx_80211.h"
-#include "wl1271_spi.h"
+#include "wl1271_io.h"
+
+#include "wl1271_reg.h"
+
+#define WSPI_CMD_READ                 0x40000000
+#define WSPI_CMD_WRITE                0x00000000
+#define WSPI_CMD_FIXED                0x20000000
+#define WSPI_CMD_BYTE_LENGTH          0x1FFE0000
+#define WSPI_CMD_BYTE_LENGTH_OFFSET   17
+#define WSPI_CMD_BYTE_ADDR            0x0001FFFF
+
+#define WSPI_INIT_CMD_CRC_LEN       5
+
+#define WSPI_INIT_CMD_START         0x00
+#define WSPI_INIT_CMD_TX            0x40
+/* the extra bypass bit is sampled by the TNET as '1' */
+#define WSPI_INIT_CMD_BYPASS_BIT    0x80
+#define WSPI_INIT_CMD_FIXEDBUSY_LEN 0x07
+#define WSPI_INIT_CMD_EN_FIXEDBUSY  0x80
+#define WSPI_INIT_CMD_DIS_FIXEDBUSY 0x00
+#define WSPI_INIT_CMD_IOD           0x40
+#define WSPI_INIT_CMD_IP            0x20
+#define WSPI_INIT_CMD_CS            0x10
+#define WSPI_INIT_CMD_WS            0x08
+#define WSPI_INIT_CMD_WSPI          0x01
+#define WSPI_INIT_CMD_END           0x01
+
+#define WSPI_INIT_CMD_LEN           8
+
+#define HW_ACCESS_WSPI_FIXED_BUSY_LEN \
+		((WL1271_BUSY_WORD_LEN - 4) / sizeof(u32))
+#define HW_ACCESS_WSPI_INIT_CMD_MASK  0
+
+static inline struct spi_device *wl_to_spi(struct wl1271 *wl)
+{
+	return wl->if_priv;
+}
 
+static struct device *wl1271_spi_wl_to_dev(struct wl1271 *wl)
+{
+	return &(wl_to_spi(wl)->dev);
+}
 
-void wl1271_spi_reset(struct wl1271 *wl)
+static void wl1271_spi_disable_interrupts(struct wl1271 *wl)
+{
+	disable_irq(wl->irq);
+}
+
+static void wl1271_spi_enable_interrupts(struct wl1271 *wl)
+{
+	enable_irq(wl->irq);
+}
+
+static void wl1271_spi_reset(struct wl1271 *wl)
 {
 	u8 *cmd;
 	struct spi_transfer t;
@@ -53,12 +104,13 @@ void wl1271_spi_reset(struct wl1271 *wl)
 	t.len = WSPI_INIT_CMD_LEN;
 	spi_message_add_tail(&t, &m);
 
-	spi_sync(wl->spi, &m);
+	spi_sync(wl_to_spi(wl), &m);
+	kfree(cmd);
 
 	wl1271_dump(DEBUG_SPI, "spi reset -> ", cmd, WSPI_INIT_CMD_LEN);
 }
 
-void wl1271_spi_init(struct wl1271 *wl)
+static void wl1271_spi_init(struct wl1271 *wl)
 {
 	u8 crc[WSPI_INIT_CMD_CRC_LEN], *cmd;
 	struct spi_transfer t;
@@ -107,48 +159,25 @@ void wl1271_spi_init(struct wl1271 *wl)
 	t.len = WSPI_INIT_CMD_LEN;
 	spi_message_add_tail(&t, &m);
 
-	spi_sync(wl->spi, &m);
+	spi_sync(wl_to_spi(wl), &m);
+	kfree(cmd);
 
 	wl1271_dump(DEBUG_SPI, "spi init -> ", cmd, WSPI_INIT_CMD_LEN);
 }
 
 #define WL1271_BUSY_WORD_TIMEOUT 1000
 
-/* FIXME: Check busy words, removed due to SPI bug */
-#if 0
-static void wl1271_spi_read_busy(struct wl1271 *wl, void *buf, size_t len)
+static int wl1271_spi_read_busy(struct wl1271 *wl)
 {
 	struct spi_transfer t[1];
 	struct spi_message m;
 	u32 *busy_buf;
 	int num_busy_bytes = 0;
 
-	wl1271_info("spi read BUSY!");
-
-	/*
-	 * Look for the non-busy word in the read buffer, and if found,
-	 * read in the remaining data into the buffer.
-	 */
-	busy_buf = (u32 *)buf;
-	for (; (u32)busy_buf < (u32)buf + len; busy_buf++) {
-		num_busy_bytes += sizeof(u32);
-		if (*busy_buf & 0x1) {
-			spi_message_init(&m);
-			memset(t, 0, sizeof(t));
-			memmove(buf, busy_buf, len - num_busy_bytes);
-			t[0].rx_buf = buf + (len - num_busy_bytes);
-			t[0].len = num_busy_bytes;
-			spi_message_add_tail(&t[0], &m);
-			spi_sync(wl->spi, &m);
-			return;
-		}
-	}
-
 	/*
 	 * Read further busy words from SPI until a non-busy word is
 	 * encountered, then read the data itself into the buffer.
 	 */
-	wl1271_info("spi read BUSY-polling needed!");
 
 	num_busy_bytes = WL1271_BUSY_WORD_TIMEOUT;
 	busy_buf = wl->buffer_busyword;
@@ -158,28 +187,21 @@ static void wl1271_spi_read_busy(struct wl1271 *wl, void *buf, size_t len)
 		memset(t, 0, sizeof(t));
 		t[0].rx_buf = busy_buf;
 		t[0].len = sizeof(u32);
+		t[0].cs_change = true;
 		spi_message_add_tail(&t[0], &m);
-		spi_sync(wl->spi, &m);
-
-		if (*busy_buf & 0x1) {
-			spi_message_init(&m);
-			memset(t, 0, sizeof(t));
-			t[0].rx_buf = buf;
-			t[0].len = len;
-			spi_message_add_tail(&t[0], &m);
-			spi_sync(wl->spi, &m);
-			return;
-		}
+		spi_sync(wl_to_spi(wl), &m);
+
+		if (*busy_buf & 0x1)
+			return 0;
 	}
 
 	/* The SPI bus is unresponsive, the read failed. */
-	memset(buf, 0, len);
 	wl1271_error("SPI read busy-word timeout!\n");
+	return -ETIMEDOUT;
 }
-#endif
 
-void wl1271_spi_raw_read(struct wl1271 *wl, int addr, void *buf,
-			 size_t len, bool fixed)
+static void wl1271_spi_raw_read(struct wl1271 *wl, int addr, void *buf,
+				size_t len, bool fixed)
 {
 	struct spi_transfer t[3];
 	struct spi_message m;
@@ -202,28 +224,38 @@ void wl1271_spi_raw_read(struct wl1271 *wl, int addr, void *buf,
 
 	t[0].tx_buf = cmd;
 	t[0].len = 4;
+	t[0].cs_change = true;
 	spi_message_add_tail(&t[0], &m);
 
 	/* Busy and non busy words read */
 	t[1].rx_buf = busy_buf;
 	t[1].len = WL1271_BUSY_WORD_LEN;
+	t[1].cs_change = true;
 	spi_message_add_tail(&t[1], &m);
 
-	t[2].rx_buf = buf;
-	t[2].len = len;
-	spi_message_add_tail(&t[2], &m);
+	spi_sync(wl_to_spi(wl), &m);
 
-	spi_sync(wl->spi, &m);
+	if (!(busy_buf[WL1271_BUSY_WORD_CNT - 1] & 0x1) &&
+	    wl1271_spi_read_busy(wl)) {
+		memset(buf, 0, len);
+		return;
+	}
 
-	/* FIXME: Check busy words, removed due to SPI bug */
-	/* if (!(busy_buf[WL1271_BUSY_WORD_CNT - 1] & 0x1))
-	   wl1271_spi_read_busy(wl, buf, len); */
+	spi_message_init(&m);
+	memset(t, 0, sizeof(t));
+
+	t[0].rx_buf = buf;
+	t[0].len = len;
+	t[0].cs_change = true;
+	spi_message_add_tail(&t[0], &m);
+
+	spi_sync(wl_to_spi(wl), &m);
 
 	wl1271_dump(DEBUG_SPI, "spi_read cmd -> ", cmd, sizeof(*cmd));
 	wl1271_dump(DEBUG_SPI, "spi_read buf <- ", buf, len);
 }
 
-void wl1271_spi_raw_write(struct wl1271 *wl, int addr, void *buf,
+static void wl1271_spi_raw_write(struct wl1271 *wl, int addr, void *buf,
 			  size_t len, bool fixed)
 {
 	struct spi_transfer t[2];
@@ -251,8 +283,181 @@ void wl1271_spi_raw_write(struct wl1271 *wl, int addr, void *buf,
 	t[1].len = len;
 	spi_message_add_tail(&t[1], &m);
 
-	spi_sync(wl->spi, &m);
+	spi_sync(wl_to_spi(wl), &m);
 
 	wl1271_dump(DEBUG_SPI, "spi_write cmd -> ", cmd, sizeof(*cmd));
 	wl1271_dump(DEBUG_SPI, "spi_write buf -> ", buf, len);
 }
+
+static irqreturn_t wl1271_irq(int irq, void *cookie)
+{
+	struct wl1271 *wl;
+	unsigned long flags;
+
+	wl1271_debug(DEBUG_IRQ, "IRQ");
+
+	wl = cookie;
+
+	/* complete the ELP completion */
+	spin_lock_irqsave(&wl->wl_lock, flags);
+	if (wl->elp_compl) {
+		complete(wl->elp_compl);
+		wl->elp_compl = NULL;
+	}
+
+	if (!test_and_set_bit(WL1271_FLAG_IRQ_RUNNING, &wl->flags))
+		ieee80211_queue_work(wl->hw, &wl->irq_work);
+	set_bit(WL1271_FLAG_IRQ_PENDING, &wl->flags);
+	spin_unlock_irqrestore(&wl->wl_lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+static void wl1271_spi_set_power(struct wl1271 *wl, bool enable)
+{
+	if (wl->set_power)
+		wl->set_power(enable);
+}
+
+static struct wl1271_if_operations spi_ops = {
+	.read		= wl1271_spi_raw_read,
+	.write		= wl1271_spi_raw_write,
+	.reset		= wl1271_spi_reset,
+	.init		= wl1271_spi_init,
+	.power		= wl1271_spi_set_power,
+	.dev		= wl1271_spi_wl_to_dev,
+	.enable_irq	= wl1271_spi_enable_interrupts,
+	.disable_irq	= wl1271_spi_disable_interrupts
+};
+
+static int __devinit wl1271_probe(struct spi_device *spi)
+{
+	struct wl12xx_platform_data *pdata;
+	struct ieee80211_hw *hw;
+	struct wl1271 *wl;
+	int ret;
+
+	pdata = spi->dev.platform_data;
+	if (!pdata) {
+		wl1271_error("no platform data");
+		return -ENODEV;
+	}
+
+	hw = wl1271_alloc_hw();
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+
+	wl = hw->priv;
+
+	dev_set_drvdata(&spi->dev, wl);
+	wl->if_priv = spi;
+
+	wl->if_ops = &spi_ops;
+
+	/* This is the only SPI value that we need to set here, the rest
+	 * comes from the board-peripherals file */
+	spi->bits_per_word = 32;
+
+	ret = spi_setup(spi);
+	if (ret < 0) {
+		wl1271_error("spi_setup failed");
+		goto out_free;
+	}
+
+	wl->set_power = pdata->set_power;
+	if (!wl->set_power) {
+		wl1271_error("set power function missing in platform data");
+		ret = -ENODEV;
+		goto out_free;
+	}
+
+	wl->irq = spi->irq;
+	if (wl->irq < 0) {
+		wl1271_error("irq missing in platform data");
+		ret = -ENODEV;
+		goto out_free;
+	}
+
+	ret = request_irq(wl->irq, wl1271_irq, 0, DRIVER_NAME, wl);
+	if (ret < 0) {
+		wl1271_error("request_irq() failed: %d", ret);
+		goto out_free;
+	}
+
+	set_irq_type(wl->irq, IRQ_TYPE_EDGE_RISING);
+
+	disable_irq(wl->irq);
+
+	ret = wl1271_init_ieee80211(wl);
+	if (ret)
+		goto out_irq;
+
+	ret = wl1271_register_hw(wl);
+	if (ret)
+		goto out_irq;
+
+	wl1271_notice("initialized");
+
+	return 0;
+
+ out_irq:
+	free_irq(wl->irq, wl);
+
+ out_free:
+	wl1271_free_hw(wl);
+
+	return ret;
+}
+
+static int __devexit wl1271_remove(struct spi_device *spi)
+{
+	struct wl1271 *wl = dev_get_drvdata(&spi->dev);
+
+	free_irq(wl->irq, wl);
+
+	wl1271_unregister_hw(wl);
+	wl1271_free_hw(wl);
+
+	return 0;
+}
+
+
+static struct spi_driver wl1271_spi_driver = {
+	.driver = {
+		.name		= "wl1271_spi",
+		.bus		= &spi_bus_type,
+		.owner		= THIS_MODULE,
+	},
+
+	.probe		= wl1271_probe,
+	.remove		= __devexit_p(wl1271_remove),
+};
+
+static int __init wl1271_init(void)
+{
+	int ret;
+
+	ret = spi_register_driver(&wl1271_spi_driver);
+	if (ret < 0) {
+		wl1271_error("failed to register spi driver: %d", ret);
+		goto out;
+	}
+
+out:
+	return ret;
+}
+
+static void __exit wl1271_exit(void)
+{
+	spi_unregister_driver(&wl1271_spi_driver);
+
+	wl1271_notice("unloaded");
+}
+
+module_init(wl1271_init);
+module_exit(wl1271_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Luciano Coelho <luciano.coelho@nokia.com>");
+MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>");
+MODULE_FIRMWARE(WL1271_FW_NAME);
diff --git a/drivers/net/wireless/wl12xx/wl1271_spi.h b/drivers/net/wireless/wl12xx/wl1271_spi.h
deleted file mode 100644
index a803596dad4a..000000000000
--- a/drivers/net/wireless/wl12xx/wl1271_spi.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * This file is part of wl1271
- *
- * Copyright (C) 1998-2009 Texas Instruments. All rights reserved.
- * Copyright (C) 2008-2009 Nokia Corporation
- *
- * Contact: Luciano Coelho <luciano.coelho@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __WL1271_SPI_H__
-#define __WL1271_SPI_H__
-
-#include "wl1271_reg.h"
-
-#define HW_ACCESS_MEMORY_MAX_RANGE		0x1FFC0
-
-#define HW_PARTITION_REGISTERS_ADDR         0x1ffc0
-#define HW_PART0_SIZE_ADDR                  (HW_PARTITION_REGISTERS_ADDR)
-#define HW_PART0_START_ADDR                 (HW_PARTITION_REGISTERS_ADDR + 4)
-#define HW_PART1_SIZE_ADDR                  (HW_PARTITION_REGISTERS_ADDR + 8)
-#define HW_PART1_START_ADDR                 (HW_PARTITION_REGISTERS_ADDR + 12)
-#define HW_PART2_SIZE_ADDR                  (HW_PARTITION_REGISTERS_ADDR + 16)
-#define HW_PART2_START_ADDR                 (HW_PARTITION_REGISTERS_ADDR + 20)
-#define HW_PART3_START_ADDR                 (HW_PARTITION_REGISTERS_ADDR + 24)
-
-#define HW_ACCESS_REGISTER_SIZE             4
-
-#define HW_ACCESS_PRAM_MAX_RANGE		0x3c000
-
-#define WSPI_CMD_READ                 0x40000000
-#define WSPI_CMD_WRITE                0x00000000
-#define WSPI_CMD_FIXED                0x20000000
-#define WSPI_CMD_BYTE_LENGTH          0x1FFE0000
-#define WSPI_CMD_BYTE_LENGTH_OFFSET   17
-#define WSPI_CMD_BYTE_ADDR            0x0001FFFF
-
-#define WSPI_INIT_CMD_CRC_LEN       5
-
-#define WSPI_INIT_CMD_START         0x00
-#define WSPI_INIT_CMD_TX            0x40
-/* the extra bypass bit is sampled by the TNET as '1' */
-#define WSPI_INIT_CMD_BYPASS_BIT    0x80
-#define WSPI_INIT_CMD_FIXEDBUSY_LEN 0x07
-#define WSPI_INIT_CMD_EN_FIXEDBUSY  0x80
-#define WSPI_INIT_CMD_DIS_FIXEDBUSY 0x00
-#define WSPI_INIT_CMD_IOD           0x40
-#define WSPI_INIT_CMD_IP            0x20
-#define WSPI_INIT_CMD_CS            0x10
-#define WSPI_INIT_CMD_WS            0x08
-#define WSPI_INIT_CMD_WSPI          0x01
-#define WSPI_INIT_CMD_END           0x01
-
-#define WSPI_INIT_CMD_LEN           8
-
-#define HW_ACCESS_WSPI_FIXED_BUSY_LEN \
-		((WL1271_BUSY_WORD_LEN - 4) / sizeof(u32))
-#define HW_ACCESS_WSPI_INIT_CMD_MASK  0
-
-#define OCP_CMD_LOOP  32
-
-#define OCP_CMD_WRITE 0x1
-#define OCP_CMD_READ  0x2
-
-#define OCP_READY_MASK  BIT(18)
-#define OCP_STATUS_MASK (BIT(16) | BIT(17))
-
-#define OCP_STATUS_NO_RESP    0x00000
-#define OCP_STATUS_OK         0x10000
-#define OCP_STATUS_REQ_FAILED 0x20000
-#define OCP_STATUS_RESP_ERROR 0x30000
-
-/* Raw target IO, address is not translated */
-void wl1271_spi_raw_write(struct wl1271 *wl, int addr, void *buf,
-		      size_t len, bool fixed);
-void wl1271_spi_raw_read(struct wl1271 *wl, int addr, void *buf,
-		     size_t len, bool fixed);
-
-/* INIT and RESET words */
-void wl1271_spi_reset(struct wl1271 *wl);
-void wl1271_spi_init(struct wl1271 *wl);
-#endif /* __WL1271_SPI_H__ */
diff --git a/drivers/net/wireless/wl12xx/wl1271_testmode.c b/drivers/net/wireless/wl12xx/wl1271_testmode.c
index 5c1c4f565fd8..554deb4d024e 100644
--- a/drivers/net/wireless/wl12xx/wl1271_testmode.c
+++ b/drivers/net/wireless/wl12xx/wl1271_testmode.c
@@ -26,7 +26,6 @@
 #include <net/genetlink.h>
 
 #include "wl1271.h"
-#include "wl1271_spi.h"
 #include "wl1271_acx.h"
 
 #define WL1271_TM_MAX_DATA_LENGTH 1024
diff --git a/drivers/net/wireless/wl12xx/wl1271_tx.c b/drivers/net/wireless/wl12xx/wl1271_tx.c
index 811e739d05bf..62db79508ddf 100644
--- a/drivers/net/wireless/wl12xx/wl1271_tx.c
+++ b/drivers/net/wireless/wl12xx/wl1271_tx.c
@@ -25,7 +25,6 @@
 #include <linux/module.h>
 
 #include "wl1271.h"
-#include "wl1271_spi.h"
 #include "wl1271_io.h"
 #include "wl1271_reg.h"
 #include "wl1271_ps.h"
@@ -47,7 +46,7 @@ static int wl1271_tx_allocate(struct wl1271 *wl, struct sk_buff *skb, u32 extra)
 {
 	struct wl1271_tx_hw_descr *desc;
 	u32 total_len = skb->len + sizeof(struct wl1271_tx_hw_descr) + extra;
-	u32 total_blocks, excluded;
+	u32 total_blocks;
 	int id, ret = -EBUSY;
 
 	/* allocate free identifier for the packet */
@@ -57,12 +56,8 @@ static int wl1271_tx_allocate(struct wl1271 *wl, struct sk_buff *skb, u32 extra)
 
 	/* approximate the number of blocks required for this packet
 	   in the firmware */
-	/* FIXME: try to figure out what is done here and make it cleaner */
-	total_blocks = (total_len + 20) >> TX_HW_BLOCK_SHIFT_DIV;
-	excluded = (total_blocks << 2) + ((total_len + 20) & 0xff) + 34;
-	total_blocks += (excluded > 252) ? 2 : 1;
-	total_blocks += TX_HW_BLOCK_SPARE;
-
+	total_blocks = total_len + TX_HW_BLOCK_SIZE - 1;
+	total_blocks = total_blocks / TX_HW_BLOCK_SIZE + TX_HW_BLOCK_SPARE;
 	if (total_blocks <= wl->tx_blocks_available) {
 		desc = (struct wl1271_tx_hw_descr *)skb_push(
 			skb, total_len - skb->len);
@@ -87,8 +82,10 @@ static int wl1271_tx_allocate(struct wl1271 *wl, struct sk_buff *skb, u32 extra)
 static int wl1271_tx_fill_hdr(struct wl1271 *wl, struct sk_buff *skb,
 			      u32 extra, struct ieee80211_tx_info *control)
 {
+	struct timespec ts;
 	struct wl1271_tx_hw_descr *desc;
 	int pad, ac;
+	s64 hosttime;
 	u16 tx_attr;
 
 	desc = (struct wl1271_tx_hw_descr *) skb->data;
@@ -102,8 +99,9 @@ static int wl1271_tx_fill_hdr(struct wl1271 *wl, struct sk_buff *skb,
 	}
 
 	/* configure packet life time */
-	desc->start_time = cpu_to_le32(jiffies_to_usecs(jiffies) -
-				       wl->time_offset);
+	getnstimeofday(&ts);
+	hosttime = (timespec_to_ns(&ts) >> 10);
+	desc->start_time = cpu_to_le32(hosttime - wl->time_offset);
 	desc->life_time = cpu_to_le16(TX_HW_MGMT_PKT_LIFETIME_TU);
 
 	/* configure the tx attributes */
@@ -170,7 +168,6 @@ static int wl1271_tx_send_packet(struct wl1271 *wl, struct sk_buff *skb,
 
 	/* write packet new counter into the write access register */
 	wl->tx_packets_count++;
-	wl1271_write32(wl, WL1271_HOST_WR_ACCESS, wl->tx_packets_count);
 
 	desc = (struct wl1271_tx_hw_descr *) skb->data;
 	wl1271_debug(DEBUG_TX, "tx id %u skb 0x%p payload %u (%u words)",
@@ -223,7 +220,7 @@ static int wl1271_tx_frame(struct wl1271 *wl, struct sk_buff *skb)
 	return ret;
 }
 
-static u32 wl1271_tx_enabled_rates_get(struct wl1271 *wl, u32 rate_set)
+u32 wl1271_tx_enabled_rates_get(struct wl1271 *wl, u32 rate_set)
 {
 	struct ieee80211_supported_band *band;
 	u32 enabled_rates = 0;
@@ -245,6 +242,7 @@ void wl1271_tx_work(struct work_struct *work)
 	struct sk_buff *skb;
 	bool woken_up = false;
 	u32 sta_rates = 0;
+	u32 prev_tx_packets_count;
 	int ret;
 
 	/* check if the rates supported by the AP have changed */
@@ -261,6 +259,8 @@ void wl1271_tx_work(struct work_struct *work)
 	if (unlikely(wl->state == WL1271_STATE_OFF))
 		goto out;
 
+	prev_tx_packets_count = wl->tx_packets_count;
+
 	/* if rates have changed, re-configure the rate policy */
 	if (unlikely(sta_rates)) {
 		wl->rate_set = wl1271_tx_enabled_rates_get(wl, sta_rates);
@@ -271,31 +271,26 @@ void wl1271_tx_work(struct work_struct *work)
 		if (!woken_up) {
 			ret = wl1271_ps_elp_wakeup(wl, false);
 			if (ret < 0)
-				goto out;
+				goto out_ack;
 			woken_up = true;
 		}
 
 		ret = wl1271_tx_frame(wl, skb);
 		if (ret == -EBUSY) {
-			/* firmware buffer is full, stop queues */
-			wl1271_debug(DEBUG_TX, "tx_work: fw buffer full, "
-				     "stop queues");
-			ieee80211_stop_queues(wl->hw);
-			set_bit(WL1271_FLAG_TX_QUEUE_STOPPED, &wl->flags);
+			/* firmware buffer is full, lets stop transmitting. */
 			skb_queue_head(&wl->tx_queue, skb);
-			goto out;
+			goto out_ack;
 		} else if (ret < 0) {
 			dev_kfree_skb(skb);
-			goto out;
-		} else if (test_and_clear_bit(WL1271_FLAG_TX_QUEUE_STOPPED,
-					      &wl->flags)) {
-			/* firmware buffer has space, restart queues */
-			wl1271_debug(DEBUG_TX,
-				     "complete_packet: waking queues");
-			ieee80211_wake_queues(wl->hw);
+			goto out_ack;
 		}
 	}
 
+out_ack:
+	/* interrupt the firmware with the new packets */
+	if (prev_tx_packets_count != wl->tx_packets_count)
+		wl1271_write32(wl, WL1271_HOST_WR_ACCESS, wl->tx_packets_count);
+
 out:
 	if (woken_up)
 		wl1271_ps_elp_sleep(wl);
@@ -308,11 +303,12 @@ static void wl1271_tx_complete_packet(struct wl1271 *wl,
 {
 	struct ieee80211_tx_info *info;
 	struct sk_buff *skb;
-	u16 seq;
 	int id = result->id;
+	int rate = -1;
+	u8 retries = 0;
 
 	/* check for id legality */
-	if (id >= ACX_TX_DESCRIPTORS || wl->tx_frames[id] == NULL) {
+	if (unlikely(id >= ACX_TX_DESCRIPTORS || wl->tx_frames[id] == NULL)) {
 		wl1271_warning("TX result illegal id: %d", id);
 		return;
 	}
@@ -320,31 +316,29 @@ static void wl1271_tx_complete_packet(struct wl1271 *wl,
 	skb = wl->tx_frames[id];
 	info = IEEE80211_SKB_CB(skb);
 
-	/* update packet status */
-	if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
-		if (result->status == TX_SUCCESS)
+	/* update the TX status info */
+	if (result->status == TX_SUCCESS) {
+		if (!(info->flags & IEEE80211_TX_CTL_NO_ACK))
 			info->flags |= IEEE80211_TX_STAT_ACK;
-		if (result->status & TX_RETRY_EXCEEDED) {
-			/* FIXME */
-			/* info->status.excessive_retries = 1; */
-			wl->stats.excessive_retries++;
-		}
+		rate = wl1271_rate_to_idx(wl, result->rate_class_index);
+		retries = result->ack_failures;
+	} else if (result->status == TX_RETRY_EXCEEDED) {
+		wl->stats.excessive_retries++;
+		retries = result->ack_failures;
 	}
 
-	/* FIXME */
-	/* info->status.retry_count = result->ack_failures; */
+	info->status.rates[0].idx = rate;
+	info->status.rates[0].count = retries;
+	info->status.rates[0].flags = 0;
+	info->status.ack_signal = -1;
+
 	wl->stats.retry_count += result->ack_failures;
 
 	/* update security sequence number */
-	seq = wl->tx_security_seq_16 +
-		(result->lsb_security_sequence_number -
-		 wl->tx_security_last_seq);
+	wl->tx_security_seq += (result->lsb_security_sequence_number -
+				wl->tx_security_last_seq);
 	wl->tx_security_last_seq = result->lsb_security_sequence_number;
 
-	if (seq < wl->tx_security_seq_16)
-		wl->tx_security_seq_32++;
-	wl->tx_security_seq_16 = seq;
-
 	/* remove private header from packet */
 	skb_pull(skb, sizeof(struct wl1271_tx_hw_descr));
 
@@ -367,23 +361,29 @@ static void wl1271_tx_complete_packet(struct wl1271 *wl,
 }
 
 /* Called upon reception of a TX complete interrupt */
-void wl1271_tx_complete(struct wl1271 *wl, u32 count)
+void wl1271_tx_complete(struct wl1271 *wl)
 {
 	struct wl1271_acx_mem_map *memmap =
 		(struct wl1271_acx_mem_map *)wl->target_mem_map;
+	u32 count, fw_counter;
 	u32 i;
 
-	wl1271_debug(DEBUG_TX, "tx_complete received, packets: %d", count);
-
 	/* read the tx results from the chipset */
 	wl1271_read(wl, le32_to_cpu(memmap->tx_result),
 		    wl->tx_res_if, sizeof(*wl->tx_res_if), false);
+	fw_counter = le32_to_cpu(wl->tx_res_if->tx_result_fw_counter);
+
+	/* write host counter to chipset (to ack) */
+	wl1271_write32(wl, le32_to_cpu(memmap->tx_result) +
+		       offsetof(struct wl1271_tx_hw_res_if,
+				tx_result_host_counter), fw_counter);
+
+	count = fw_counter - wl->tx_results_count;
+	wl1271_debug(DEBUG_TX, "tx_complete received, packets: %d", count);
 
 	/* verify that the result buffer is not getting overrun */
-	if (count > TX_HW_RESULT_QUEUE_LEN) {
+	if (unlikely(count > TX_HW_RESULT_QUEUE_LEN))
 		wl1271_warning("TX result overflow from chipset: %d", count);
-		count = TX_HW_RESULT_QUEUE_LEN;
-	}
 
 	/* process the results */
 	for (i = 0; i < count; i++) {
@@ -397,11 +397,18 @@ void wl1271_tx_complete(struct wl1271 *wl, u32 count)
 		wl->tx_results_count++;
 	}
 
-	/* write host counter to chipset (to ack) */
-	wl1271_write32(wl, le32_to_cpu(memmap->tx_result) +
-		       offsetof(struct wl1271_tx_hw_res_if,
-		       tx_result_host_counter),
-		       le32_to_cpu(wl->tx_res_if->tx_result_fw_counter));
+	if (test_bit(WL1271_FLAG_TX_QUEUE_STOPPED, &wl->flags) &&
+	    skb_queue_len(&wl->tx_queue) <= WL1271_TX_QUEUE_LOW_WATERMARK) {
+		unsigned long flags;
+
+		/* firmware buffer has space, restart queues */
+		wl1271_debug(DEBUG_TX, "tx_complete: waking queues");
+		spin_lock_irqsave(&wl->wl_lock, flags);
+		ieee80211_wake_queues(wl->hw);
+		clear_bit(WL1271_FLAG_TX_QUEUE_STOPPED, &wl->flags);
+		spin_unlock_irqrestore(&wl->wl_lock, flags);
+		ieee80211_queue_work(wl->hw, &wl->tx_work);
+	}
 }
 
 /* caller must hold wl->mutex */
@@ -409,31 +416,19 @@ void wl1271_tx_flush(struct wl1271 *wl)
 {
 	int i;
 	struct sk_buff *skb;
-	struct ieee80211_tx_info *info;
 
 	/* TX failure */
 /* 	control->flags = 0; FIXME */
 
 	while ((skb = skb_dequeue(&wl->tx_queue))) {
-		info = IEEE80211_SKB_CB(skb);
-
 		wl1271_debug(DEBUG_TX, "flushing skb 0x%p", skb);
-
-		if (!(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS))
-				continue;
-
 		ieee80211_tx_status(wl->hw, skb);
 	}
 
 	for (i = 0; i < ACX_TX_DESCRIPTORS; i++)
 		if (wl->tx_frames[i] != NULL) {
 			skb = wl->tx_frames[i];
-			info = IEEE80211_SKB_CB(skb);
-
-			if (!(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS))
-				continue;
-
-			ieee80211_tx_status(wl->hw, skb);
 			wl->tx_frames[i] = NULL;
+			ieee80211_tx_status(wl->hw, skb);
 		}
 }
diff --git a/drivers/net/wireless/wl12xx/wl1271_tx.h b/drivers/net/wireless/wl12xx/wl1271_tx.h
index 17e405a09caa..3b8b7ac253fd 100644
--- a/drivers/net/wireless/wl12xx/wl1271_tx.h
+++ b/drivers/net/wireless/wl12xx/wl1271_tx.h
@@ -26,7 +26,7 @@
 #define __WL1271_TX_H__
 
 #define TX_HW_BLOCK_SPARE                2
-#define TX_HW_BLOCK_SHIFT_DIV            8
+#define TX_HW_BLOCK_SIZE                 252
 
 #define TX_HW_MGMT_PKT_LIFETIME_TU       2000
 /* The chipset reference driver states, that the "aid" value 1
@@ -125,9 +125,6 @@ struct wl1271_tx_hw_res_if {
 
 static inline int wl1271_tx_get_queue(int queue)
 {
-	/* FIXME: use best effort until WMM is enabled */
-	return CONF_TX_AC_BE;
-
 	switch (queue) {
 	case 0:
 		return CONF_TX_AC_VO;
@@ -160,7 +157,9 @@ static inline int wl1271_tx_ac_to_tid(int ac)
 }
 
 void wl1271_tx_work(struct work_struct *work);
-void wl1271_tx_complete(struct wl1271 *wl, u32 count);
+void wl1271_tx_complete(struct wl1271 *wl);
 void wl1271_tx_flush(struct wl1271 *wl);
+u8 wl1271_rate_to_idx(struct wl1271 *wl, int rate);
+u32 wl1271_tx_enabled_rates_get(struct wl1271 *wl, u32 rate_set);
 
 #endif