diff options
| author | Dominik Brodowski <linux@dominikbrodowski.net> | 2010-07-24 17:23:51 +0200 |
|---|---|---|
| committer | Dominik Brodowski <linux@dominikbrodowski.net> | 2010-08-03 09:04:11 +0200 |
| commit | 90abdc3b973229bae98dd96649d9f7106cc177a4 (patch) | |
| tree | 5c1a7a131b65560dd73b5103118d8c7631bd76a4 /drivers/net/wireless/wl3501_cs.c | |
| parent | pcmcia: do not use io_req_t after call to pcmcia_request_io() (diff) | |
| download | linux-90abdc3b973229bae98dd96649d9f7106cc177a4.tar.xz linux-90abdc3b973229bae98dd96649d9f7106cc177a4.zip | |
pcmcia: do not use io_req_t when calling pcmcia_request_io()
Instead of io_req_t, drivers are now requested to fill out
struct pcmcia_device *p_dev->resource[0,1] for up to two ioport
ranges. After a call to pcmcia_request_io(), the ports found there
are reserved, after calling pcmcia_request_configuration(), they may
be used.
CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
CC: Michael Buesch <mb@bu3sch.de>
Acked-by: Marcel Holtmann <marcel@holtmann.org> (for drivers/bluetooth/)
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Diffstat (limited to 'drivers/net/wireless/wl3501_cs.c')
| -rw-r--r-- | drivers/net/wireless/wl3501_cs.c | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index a32f220648c0..a1cc2d498a1c 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -1884,9 +1884,8 @@ static int wl3501_probe(struct pcmcia_device *p_dev) struct wl3501_card *this; /* The io structure describes IO port mapping */ - p_dev->io.NumPorts1 = 16; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = 5; + p_dev->resource[0]->end = 16; + p_dev->resource[0]->flags = IO_DATA_PATH_WIDTH_8; /* General socket configuration */ p_dev->conf.Attributes = CONF_ENABLE_IRQ; @@ -1932,13 +1931,14 @@ static int wl3501_config(struct pcmcia_device *link) /* Try allocating IO ports. This tries a few fixed addresses. If you * want, you can also read the card's config table to pick addresses -- * see the serial driver for an example. */ + link->io_lines = 5; for (j = 0x280; j < 0x400; j += 0x20) { /* The '^0x300' is so that we probe 0x300-0x3ff first, then * 0x200-0x2ff, and so on, because this seems safer */ - link->io.BasePort1 = j; - link->io.BasePort2 = link->io.BasePort1 + 0x10; - i = pcmcia_request_io(link, &link->io); + link->resource[0]->start = j; + link->resource[1]->start = link->resource[0]->start + 0x10; + i = pcmcia_request_io(link); if (i == 0) break; } |