pcmcia: convert pcmcia_request_configuration to pcmcia_enable_device

pcmcia_enable_device() now replaces pcmcia_request_configuration().
Instead of config_req_t, all necessary flags are either passed as
a parameter to pcmcia_enable_device(), or (in rare circumstances)
set in struct pcmcia_device -> flags.

With the last remaining user of include/pcmcia/cs.h gone, remove
all references.

CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
CC: Jiri Kosina <jkosina@suse.cz>
CC: linux-scsi@vger.kernel.org
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth)
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

9 files changed, 23 insertions, 68 deletions

diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index 40f9ed760bb3..5939d0c7a5c8 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -32,7 +32,6 @@
 #include <linux/timer.h>
 #include <linux/netdevice.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -96,15 +95,6 @@ static int airo_probe(struct pcmcia_device *p_dev)
 
 	dev_dbg(&p_dev->dev, "airo_attach()\n");
 
-	/*
-	  General socket configuration defaults can go here.  In this
-	  client, we assume very little, and rely on the CIS for almost
-	  everything.  In most clients, many details (i.e., number, sizes,
-	  and attributes of IO windows) are fixed by the nature of the
-	  device, and can be hard-wired here.
-	*/
-	p_dev->conf.Attributes = 0;
-
 	/* Allocate space for private device-specific data */
 	local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
 	if (!local) {
@@ -158,7 +148,7 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
 
 	/* Does this card need audio output? */
 	if (cfg->flags & CISTPL_CFTABLE_AUDIO)
-		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+		p_dev->config_flags |= CONF_ENABLE_SPKR;
 
 	/* Use power settings for Vcc and Vpp if present */
 	/*  Note that the CIS values need to be rescaled */
@@ -167,7 +157,7 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
 	else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
 		p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
 
-	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+	p_dev->config_flags |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
 	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
@@ -229,7 +219,7 @@ static int airo_config(struct pcmcia_device *link)
 	  the I/O windows and the interrupt mapping, and putting the
 	  card and host interface into "Memory and IO" mode.
 	*/
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed;
 	((local_info_t *)link->priv)->eth_dev =
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index 8b75158caed7..080266eba985 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -42,7 +42,6 @@
 #include <linux/moduleparam.h>
 #include <linux/device.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -106,15 +105,6 @@ static int atmel_probe(struct pcmcia_device *p_dev)
 
 	dev_dbg(&p_dev->dev, "atmel_attach()\n");
 
-	/*
-	  General socket configuration defaults can go here.  In this
-	  client, we assume very little, and rely on the CIS for almost
-	  everything.  In most clients, many details (i.e., number, sizes,
-	  and attributes of IO windows) are fixed by the nature of the
-	  device, and can be hard-wired here.
-	*/
-	p_dev->conf.Attributes = 0;
-
 	/* Allocate space for private device-specific data */
 	local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
 	if (!local) {
@@ -175,7 +165,7 @@ static int atmel_config_check(struct pcmcia_device *p_dev,
 
 	/* Does this card need audio output? */
 	if (cfg->flags & CISTPL_CFTABLE_AUDIO)
-		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+		p_dev->config_flags |= CONF_ENABLE_SPKR;
 
 	/* Use power settings for Vcc and Vpp if present */
 	/*  Note that the CIS values need to be rescaled */
@@ -184,7 +174,7 @@ static int atmel_config_check(struct pcmcia_device *p_dev,
 	else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
 		p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
 
-	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+	p_dev->config_flags |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
 	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
@@ -242,7 +232,7 @@ static int atmel_config(struct pcmcia_device *link)
 	  the I/O windows and the interrupt mapping, and putting the
 	  card and host interface into "Memory and IO" mode.
 	*/
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed;
 
diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c
index 138b26fcc75c..61abab1f1c7c 100644
--- a/drivers/net/wireless/b43/pcmcia.c
+++ b/drivers/net/wireless/b43/pcmcia.c
@@ -26,7 +26,6 @@
 #include <linux/ssb/ssb.h>
 #include <linux/slab.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ciscode.h>
 #include <pcmcia/ds.h>
@@ -72,7 +71,7 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
 
 	err = -ENODEV;
 
-	dev->conf.Attributes = CONF_ENABLE_IRQ;
+	dev->config_flags |= CONF_ENABLE_IRQ;
 
 	dev->resource[2]->flags |=  WIN_ENABLE | WIN_DATA_WIDTH_16 |
 			 WIN_USE_WAIT;
@@ -89,7 +88,7 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
 	if (!dev->irq)
 		goto err_disable;
 
-	res = pcmcia_request_configuration(dev, &dev->conf);
+	res = pcmcia_enable_device(dev);
 	if (res != 0)
 		goto err_disable;
 
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 5704d3f9e1b7..5b0b5828b3cf 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -12,7 +12,6 @@
 #include <linux/wireless.h>
 #include <net/iw_handler.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -484,7 +483,7 @@ static int prism2_config_check(struct pcmcia_device *p_dev,
 
 	/* Does this card need audio output? */
 	if (cfg->flags & CISTPL_CFTABLE_AUDIO)
-		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
+		p_dev->config_flags |= CONF_ENABLE_SPKR;
 
 	/* Use power settings for Vcc and Vpp if present */
 	/*  Note that the CIS values need to be rescaled */
@@ -510,7 +509,7 @@ static int prism2_config_check(struct pcmcia_device *p_dev,
 		p_dev->vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 
 	/* Do we need to allocate an interrupt? */
-	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+	p_dev->config_flags |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
 	PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
@@ -590,7 +589,7 @@ static int prism2_config(struct pcmcia_device *link)
 	 * the I/O windows and the interrupt mapping, and putting the
 	 * card and host interface into "Memory and IO" mode.
 	 */
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed_unlock;
 
@@ -605,8 +604,7 @@ static int prism2_config(struct pcmcia_device *link)
 	if (link->vpp)
 		printk(", Vpp %d.%d", link->vpp / 10,
 		       link->vpp % 10);
-	if (link->conf.Attributes & CONF_ENABLE_IRQ)
-		printk(", irq %d", link->irq);
+	printk(", irq %d", link->irq);
 	if (link->resource[0])
 		printk(" & %pR", link->resource[0]);
 	if (link->resource[1])
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index 814b7faaa365..6020c19b1bdb 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -28,7 +28,6 @@
 #include <linux/firmware.h>
 #include <linux/netdevice.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/ds.h>
 
@@ -806,7 +805,7 @@ static int if_cs_ioprobe(struct pcmcia_device *p_dev,
 	p_dev->resource[0]->end = cfg->io.win[0].len;
 
 	/* Do we need to allocate an interrupt? */
-	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+	p_dev->config_flags |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
 	if (cfg->io.nwin != 1) {
@@ -835,14 +834,11 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
 	card->p_dev = p_dev;
 	p_dev->priv = card;
 
-	p_dev->conf.Attributes = 0;
-
 	if (pcmcia_loop_config(p_dev, if_cs_ioprobe, NULL)) {
 		lbs_pr_err("error in pcmcia_loop_config\n");
 		goto out1;
 	}
 
-
 	/*
 	 * Allocate an interrupt line.  Note that this does not assign
 	 * a handler to the interrupt, unless the 'Handler' member of
@@ -865,9 +861,9 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
 	 * the I/O windows and the interrupt mapping, and putting the
 	 * card and host interface into "Memory and IO" mode.
 	 */
-	ret = pcmcia_request_configuration(p_dev, &p_dev->conf);
+	ret = pcmcia_enable_device(p_dev);
 	if (ret) {
-		lbs_pr_err("error in pcmcia_request_configuration\n");
+		lbs_pr_err("error in pcmcia_enable_device\n");
 		goto out2;
 	}
 
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index 1147d6bd4733..00316a1a1092 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -17,7 +17,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -117,13 +116,6 @@ orinoco_cs_probe(struct pcmcia_device *link)
 	card->p_dev = link;
 	link->priv = priv;
 
-	/* General socket configuration defaults can go here.  In this
-	 * client, we assume very little, and rely on the CIS for
-	 * almost everything.  In most clients, many details (i.e.,
-	 * number, sizes, and attributes of IO windows) are fixed by
-	 * the nature of the device, and can be hard-wired here. */
-	link->conf.Attributes = 0;
-
 	return orinoco_cs_config(link);
 }				/* orinoco_cs_attach */
 
@@ -187,7 +179,7 @@ static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
 			dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 
 	/* Do we need to allocate an interrupt? */
-	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+	p_dev->config_flags |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
 	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
@@ -266,7 +258,7 @@ orinoco_cs_config(struct pcmcia_device *link)
 	 * the I/O windows and the interrupt mapping, and putting the
 	 * card and host interface into "Memory and IO" mode.
 	 */
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed;
 
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
index 20b08ab87655..ca2c6c0c5576 100644
--- a/drivers/net/wireless/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -25,7 +25,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -179,13 +178,6 @@ spectrum_cs_probe(struct pcmcia_device *link)
 	card->p_dev = link;
 	link->priv = priv;
 
-	/* General socket configuration defaults can go here.  In this
-	 * client, we assume very little, and rely on the CIS for
-	 * almost everything.  In most clients, many details (i.e.,
-	 * number, sizes, and attributes of IO windows) are fixed by
-	 * the nature of the device, and can be hard-wired here. */
-	link->conf.Attributes = 0;
-
 	return spectrum_cs_config(link);
 }				/* spectrum_cs_attach */
 
@@ -249,7 +241,7 @@ static int spectrum_cs_config_check(struct pcmcia_device *p_dev,
 			dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 
 	/* Do we need to allocate an interrupt? */
-	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
+	p_dev->config_flags |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
 	p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
@@ -329,7 +321,7 @@ spectrum_cs_config(struct pcmcia_device *link)
 	 * the I/O windows and the interrupt mapping, and putting the
 	 * card and host interface into "Memory and IO" mode.
 	 */
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed;
 
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 7fb66cc1e9fd..1457f34efa9a 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -46,7 +46,6 @@
 #include <linux/ethtool.h>
 #include <linux/ieee80211.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -318,7 +317,7 @@ static int ray_probe(struct pcmcia_device *p_dev)
 	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
 
 	/* General socket configuration */
-	p_dev->conf.Attributes = CONF_ENABLE_IRQ;
+	p_dev->config_flags |= CONF_ENABLE_IRQ;
 	p_dev->config_index = 1;
 
 	p_dev->priv = dev;
@@ -413,7 +412,7 @@ static int ray_config(struct pcmcia_device *link)
 	/* This actually configures the PCMCIA socket -- setting up
 	   the I/O windows and the interrupt mapping.
 	 */
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed;
 
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 3947cf8e63c5..101b6ffd560e 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -48,7 +48,6 @@
 
 #include <net/iw_handler.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -1888,7 +1887,7 @@ static int wl3501_probe(struct pcmcia_device *p_dev)
 	p_dev->resource[0]->flags	= IO_DATA_PATH_WIDTH_8;
 
 	/* General socket configuration */
-	p_dev->conf.Attributes	= CONF_ENABLE_IRQ;
+	p_dev->config_flags	= CONF_ENABLE_IRQ;
 	p_dev->config_index	= 1;
 
 	dev = alloc_etherdev(sizeof(struct wl3501_card));
@@ -1954,7 +1953,7 @@ static int wl3501_config(struct pcmcia_device *link)
 	/* This actually configures the PCMCIA socket -- setting up the I/O
 	 * windows and the interrupt mapping.  */
 
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed;