tree-wide: fix comment/printk typos

"gadget", "through", "command", "maintain", "maintain", "controller", "address",
"between", "initiali[zs]e", "instead", "function", "select", "already",
"equal", "access", "management", "hierarchy", "registration", "interest",
"relative", "memory", "offset", "already",

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

8 files changed, 12 insertions, 12 deletions

diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index ca79ecd832fd..2a246d13b520 100644
--- a/drivers/net/wireless/ath/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -1063,7 +1063,7 @@
 /*
  * EEPROM command register
  */
-#define AR5K_EEPROM_CMD		0x6008			/* Register Addres */
+#define AR5K_EEPROM_CMD		0x6008			/* Register Address */
 #define AR5K_EEPROM_CMD_READ	0x00000001	/* EEPROM read */
 #define AR5K_EEPROM_CMD_WRITE	0x00000002	/* EEPROM write */
 #define AR5K_EEPROM_CMD_RESET	0x00000004	/* EEPROM reset */
@@ -1083,7 +1083,7 @@
 /*
  * EEPROM config register
  */
-#define AR5K_EEPROM_CFG			0x6010			/* Register Addres */
+#define AR5K_EEPROM_CFG			0x6010			/* Register Address */
 #define AR5K_EEPROM_CFG_SIZE		0x00000003		/* Size determination override */
 #define AR5K_EEPROM_CFG_SIZE_AUTO	0
 #define AR5K_EEPROM_CFG_SIZE_4KBIT	1
@@ -1125,7 +1125,7 @@
  * Second station id register (Upper 16 bits of MAC address + PCU settings)
  */
 #define AR5K_STA_ID1			0x8004			/* Register Address */
-#define	AR5K_STA_ID1_ADDR_U16		0x0000ffff	/* Upper 16 bits of MAC addres */
+#define	AR5K_STA_ID1_ADDR_U16		0x0000ffff	/* Upper 16 bits of MAC address */
 #define AR5K_STA_ID1_AP			0x00010000	/* Set AP mode */
 #define AR5K_STA_ID1_ADHOC		0x00020000	/* Set Ad-Hoc mode */
 #define AR5K_STA_ID1_PWR_SV		0x00040000	/* Power save reporting */
diff --git a/drivers/net/wireless/b43/phy_g.c b/drivers/net/wireless/b43/phy_g.c
index 0dc33b65e86b..be4828167012 100644
--- a/drivers/net/wireless/b43/phy_g.c
+++ b/drivers/net/wireless/b43/phy_g.c
@@ -1919,7 +1919,7 @@ static void b43_hardware_pctl_init_gphy(struct b43_wldev *dev)
 	b43_hf_write(dev, b43_hf_read(dev) | B43_HF_HWPCTL);
 }
 
-/* Intialize B/G PHY power control */
+/* Initialize B/G PHY power control */
 static void b43_phy_init_pctl(struct b43_wldev *dev)
 {
 	struct ssb_bus *bus = dev->dev->bus;
diff --git a/drivers/net/wireless/b43legacy/phy.c b/drivers/net/wireless/b43legacy/phy.c
index 35033dd342ce..28e477d01587 100644
--- a/drivers/net/wireless/b43legacy/phy.c
+++ b/drivers/net/wireless/b43legacy/phy.c
@@ -153,7 +153,7 @@ void b43legacy_phy_calibrate(struct b43legacy_wldev *dev)
 	phy->calibrated = 1;
 }
 
-/* intialize B PHY power control
+/* initialize B PHY power control
  * as described in http://bcm-specs.sipsolutions.net/InitPowerControl
  */
 static void b43legacy_phy_init_pctl(struct b43legacy_wldev *dev)
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 7c7f7dcb1b1e..972b738c0e4a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -107,7 +107,7 @@ static int iwl_process_add_sta_resp(struct iwl_priv *priv,
 	/*
 	 * XXX: The MAC address in the command buffer is often changed from
 	 * the original sent to the device. That is, the MAC address
-	 * written to the command buffer often is not the same MAC adress
+	 * written to the command buffer often is not the same MAC address
 	 * read from the command buffer when the command returns. This
 	 * issue has not yet been resolved and this debugging is left to
 	 * observe the problem.
diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c
index 2c8cc954d1b6..ec2c75d77cea 100644
--- a/drivers/net/wireless/prism54/islpci_dev.c
+++ b/drivers/net/wireless/prism54/islpci_dev.c
@@ -630,7 +630,7 @@ islpci_alloc_memory(islpci_private *priv)
 	printk(KERN_DEBUG "islpci_alloc_memory\n");
 #endif
 
-	/* remap the PCI device base address to accessable */
+	/* remap the PCI device base address to accessible */
 	if (!(priv->device_base =
 	      ioremap(pci_resource_start(priv->pdev, 0),
 		      ISL38XX_PCI_MEM_SIZE))) {
@@ -709,7 +709,7 @@ islpci_alloc_memory(islpci_private *priv)
 				   PCI_DMA_FROMDEVICE);
 		if (!priv->pci_map_rx_address[counter]) {
 			/* error mapping the buffer to device
-			   accessable memory address */
+			   accessible memory address */
 			printk(KERN_ERR "failed to map skb DMA'able\n");
 			goto out_free;
 		}
@@ -773,7 +773,7 @@ islpci_free_memory(islpci_private *priv)
 		priv->data_low_rx[counter] = NULL;
 	}
 
-	/* Free the acces control list and the WPA list */
+	/* Free the access control list and the WPA list */
 	prism54_acl_clean(&priv->acl);
 	prism54_wpa_bss_ie_clean(priv);
 	mgt_clean(priv);
diff --git a/drivers/net/wireless/prism54/islpci_eth.c b/drivers/net/wireless/prism54/islpci_eth.c
index 2fc52bc2d7dd..d44f8e20cce0 100644
--- a/drivers/net/wireless/prism54/islpci_eth.c
+++ b/drivers/net/wireless/prism54/islpci_eth.c
@@ -450,7 +450,7 @@ islpci_eth_receive(islpci_private *priv)
 				   MAX_FRAGMENT_SIZE_RX + 2,
 				   PCI_DMA_FROMDEVICE);
 		if (unlikely(!priv->pci_map_rx_address[index])) {
-			/* error mapping the buffer to device accessable memory address */
+			/* error mapping the buffer to device accessible memory address */
 			DEBUG(SHOW_ERROR_MESSAGES,
 			      "Error mapping DMA address\n");
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index c3c206a97d54..a7d3f4c3ee0d 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -274,7 +274,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw,
 	intf->beacon = entry;
 
 	/*
-	 * The MAC adddress must be configured after the device
+	 * The MAC address must be configured after the device
 	 * has been initialized. Otherwise the device can reset
 	 * the MAC registers.
 	 * The BSSID address must only be configured in AP mode,
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index ee82df62e646..3e5befe4d03b 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -192,7 +192,7 @@ static inline void wl3501_switch_page(struct wl3501_card *this, u8 page)
 }
 
 /*
- * Get Ethernet MAC addresss.
+ * Get Ethernet MAC address.
  *
  * WARNING: We switch to FPAGE0 and switc back again.
  *          Making sure there is no other WL function beening called by ISR.