diff options
author | Don Skidmore <donald.c.skidmore@intel.com> | 2010-11-17 04:27:16 +0100 |
---|---|---|
committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2010-11-17 04:27:16 +0100 |
commit | fe15e8e1c78521e0b4e375d6ed415b82265419c9 (patch) | |
tree | 7e87256e93074b1950606562dab514f9ab8ba237 /drivers/net | |
parent | ixgbe: make silicon specific functions generic (diff) | |
download | linux-fe15e8e1c78521e0b4e375d6ed415b82265419c9.tar.xz linux-fe15e8e1c78521e0b4e375d6ed415b82265419c9.zip |
ixgbe: add MAC and PHY support for x540
Adds the new x540.c file and Aquantia 1202 PHY for X540 support.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/ixgbe/Makefile | 2 | ||||
-rw-r--r-- | drivers/net/ixgbe/ixgbe.h | 2 | ||||
-rw-r--r-- | drivers/net/ixgbe/ixgbe_82599.c | 8 | ||||
-rw-r--r-- | drivers/net/ixgbe/ixgbe_ethtool.c | 1 | ||||
-rw-r--r-- | drivers/net/ixgbe/ixgbe_main.c | 1 | ||||
-rw-r--r-- | drivers/net/ixgbe/ixgbe_phy.c | 23 | ||||
-rw-r--r-- | drivers/net/ixgbe/ixgbe_phy.h | 2 | ||||
-rw-r--r-- | drivers/net/ixgbe/ixgbe_type.h | 9 | ||||
-rw-r--r-- | drivers/net/ixgbe/ixgbe_x540.c | 722 |
9 files changed, 766 insertions, 4 deletions
diff --git a/drivers/net/ixgbe/Makefile b/drivers/net/ixgbe/Makefile index 8f81efb49169..7d7387fbdecd 100644 --- a/drivers/net/ixgbe/Makefile +++ b/drivers/net/ixgbe/Makefile @@ -34,7 +34,7 @@ obj-$(CONFIG_IXGBE) += ixgbe.o ixgbe-objs := ixgbe_main.o ixgbe_common.o ixgbe_ethtool.o \ ixgbe_82599.o ixgbe_82598.o ixgbe_phy.o ixgbe_sriov.o \ - ixgbe_mbx.o + ixgbe_mbx.o ixgbe_x540.o ixgbe-$(CONFIG_IXGBE_DCB) += ixgbe_dcb.o ixgbe_dcb_82598.o \ ixgbe_dcb_82599.o ixgbe_dcb_nl.o diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h index 2b8cbb3a81fa..4806736785a3 100644 --- a/drivers/net/ixgbe/ixgbe.h +++ b/drivers/net/ixgbe/ixgbe.h @@ -481,10 +481,12 @@ struct ixgbe_rsc_cb { enum ixgbe_boards { board_82598, board_82599, + board_X540, }; extern struct ixgbe_info ixgbe_82598_info; extern struct ixgbe_info ixgbe_82599_info; +extern struct ixgbe_info ixgbe_X540_info; #ifdef CONFIG_IXGBE_DCB extern const struct dcbnl_rtnl_ops dcbnl_ops; extern int ixgbe_copy_dcb_cfg(struct ixgbe_dcb_config *src_dcb_cfg, diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c index 144c44a6b216..e34643eef162 100644 --- a/drivers/net/ixgbe/ixgbe_82599.c +++ b/drivers/net/ixgbe/ixgbe_82599.c @@ -181,6 +181,10 @@ static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw) phy->ops.get_firmware_version = &ixgbe_get_phy_firmware_version_tnx; break; + case ixgbe_phy_aq: + phy->ops.get_firmware_version = + &ixgbe_get_phy_firmware_version_generic; + break; default: break; } @@ -298,7 +302,8 @@ static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw) /* Detect if there is a copper PHY attached. */ if (hw->phy.type == ixgbe_phy_cu_unknown || - hw->phy.type == ixgbe_phy_tn) { + hw->phy.type == ixgbe_phy_tn || + hw->phy.type == ixgbe_phy_aq) { media_type = ixgbe_media_type_copper; goto out; } @@ -1890,6 +1895,7 @@ static u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw) hw->phy.ops.identify(hw); if (hw->phy.type == ixgbe_phy_tn || + hw->phy.type == ixgbe_phy_aq || hw->phy.type == ixgbe_phy_cu_unknown) { hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD, &ext_ability); diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c index 6871b2be64f6..b884f90b5805 100644 --- a/drivers/net/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ixgbe/ixgbe_ethtool.c @@ -214,6 +214,7 @@ static int ixgbe_get_settings(struct net_device *netdev, /* Get PHY type */ switch (adapter->hw.phy.type) { case ixgbe_phy_tn: + case ixgbe_phy_aq: case ixgbe_phy_cu_unknown: /* Copper 10G-BASET */ ecmd->port = PORT_TP; diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 6e56f7b7c8fd..94c30b4f489e 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -59,6 +59,7 @@ static char ixgbe_copyright[] = "Copyright (c) 1999-2010 Intel Corporation."; static const struct ixgbe_info *ixgbe_info_tbl[] = { [board_82598] = &ixgbe_82598_info, [board_82599] = &ixgbe_82599_info, + [board_X540] = &ixgbe_X540_info, }; /* ixgbe_pci_tbl - PCI Device ID Table diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c index bc255ec48428..c445fbce56ee 100644 --- a/drivers/net/ixgbe/ixgbe_phy.c +++ b/drivers/net/ixgbe/ixgbe_phy.c @@ -115,6 +115,9 @@ static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id) case TN1010_PHY_ID: phy_type = ixgbe_phy_tn; break; + case AQ1202_PHY_ID: + phy_type = ixgbe_phy_aq; + break; case QT2022_PHY_ID: phy_type = ixgbe_phy_qt; break; @@ -433,8 +436,8 @@ s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw, * Determines the link capabilities by reading the AUTOC register. */ s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw, - ixgbe_link_speed *speed, - bool *autoneg) + ixgbe_link_speed *speed, + bool *autoneg) { s32 status = IXGBE_ERR_LINK_SETUP; u16 speed_ability; @@ -1411,6 +1414,22 @@ s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw, } /** + * ixgbe_get_phy_firmware_version_generic - Gets the PHY Firmware Version + * @hw: pointer to hardware structure + * @firmware_version: pointer to the PHY Firmware Version +**/ +s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw, + u16 *firmware_version) +{ + s32 status = 0; + + status = hw->phy.ops.read_reg(hw, AQ_FW_REV, MDIO_MMD_VEND1, + firmware_version); + + return status; +} + +/** * ixgbe_tn_check_overtemp - Checks if an overtemp occured. * @hw: pointer to hardware structure * diff --git a/drivers/net/ixgbe/ixgbe_phy.h b/drivers/net/ixgbe/ixgbe_phy.h index 86f83bd130cb..e2c6b7eac641 100644 --- a/drivers/net/ixgbe/ixgbe_phy.h +++ b/drivers/net/ixgbe/ixgbe_phy.h @@ -106,6 +106,8 @@ s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, bool *link_up); s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw, u16 *firmware_version); +s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw, + u16 *firmware_version); s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw); s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw); diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h index 86c0049ba199..cbcb15277b47 100644 --- a/drivers/net/ixgbe/ixgbe_type.h +++ b/drivers/net/ixgbe/ixgbe_type.h @@ -995,8 +995,10 @@ /* PHY IDs*/ #define TN1010_PHY_ID 0x00A19410 #define TNX_FW_REV 0xB +#define AQ1202_PHY_ID 0x03A1B440 #define QT2022_PHY_ID 0x0043A400 #define ATH_PHY_ID 0x03429050 +#define AQ_FW_REV 0x20 /* PHY Types */ #define IXGBE_M88E1145_E_PHY_ID 0x01410CD0 @@ -1492,6 +1494,7 @@ #define IXGBE_EEC_PRES 0x00000100 /* EEPROM Present */ #define IXGBE_EEC_ARD 0x00000200 /* EEPROM Auto Read Done */ #define IXGBE_EEC_FLUP 0x00800000 /* Flash update command */ +#define IXGBE_EEC_SEC1VAL 0x02000000 /* Sector 1 Valid */ #define IXGBE_EEC_FLUDONE 0x04000000 /* Flash update done */ /* EEPROM Addressing bits based on type (0-small, 1-large) */ #define IXGBE_EEC_ADDR_SIZE 0x00000400 @@ -1506,7 +1509,9 @@ #define IXGBE_EEPROM_SUM 0xBABA #define IXGBE_PCIE_ANALOG_PTR 0x03 #define IXGBE_ATLAS0_CONFIG_PTR 0x04 +#define IXGBE_PHY_PTR 0x04 #define IXGBE_ATLAS1_CONFIG_PTR 0x05 +#define IXGBE_OPTION_ROM_PTR 0x05 #define IXGBE_PCIE_GENERAL_PTR 0x06 #define IXGBE_PCIE_CONFIG0_PTR 0x07 #define IXGBE_PCIE_CONFIG1_PTR 0x08 @@ -2173,6 +2178,7 @@ struct ixgbe_atr_input_masks { enum ixgbe_eeprom_type { ixgbe_eeprom_uninitialized = 0, ixgbe_eeprom_spi, + ixgbe_flash, ixgbe_eeprom_none /* No NVM support */ }; @@ -2180,12 +2186,14 @@ enum ixgbe_mac_type { ixgbe_mac_unknown = 0, ixgbe_mac_82598EB, ixgbe_mac_82599EB, + ixgbe_mac_X540, ixgbe_num_macs }; enum ixgbe_phy_type { ixgbe_phy_unknown = 0, ixgbe_phy_tn, + ixgbe_phy_aq, ixgbe_phy_cu_unknown, ixgbe_phy_qt, ixgbe_phy_xaui, @@ -2584,6 +2592,7 @@ struct ixgbe_hw { u16 subsystem_vendor_id; u8 revision_id; bool adapter_stopped; + bool force_full_reset; }; struct ixgbe_info { diff --git a/drivers/net/ixgbe/ixgbe_x540.c b/drivers/net/ixgbe/ixgbe_x540.c new file mode 100644 index 000000000000..7de5f7ea7104 --- /dev/null +++ b/drivers/net/ixgbe/ixgbe_x540.c @@ -0,0 +1,722 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2010 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/sched.h> + +#include "ixgbe.h" +#include "ixgbe_phy.h" +//#include "ixgbe_mbx.h" + +#define IXGBE_X540_MAX_TX_QUEUES 128 +#define IXGBE_X540_MAX_RX_QUEUES 128 +#define IXGBE_X540_RAR_ENTRIES 128 +#define IXGBE_X540_MC_TBL_SIZE 128 +#define IXGBE_X540_VFT_TBL_SIZE 128 + +static s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw); +static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw); +static s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask); +static void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask); +static s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw); +static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw); + +enum ixgbe_media_type ixgbe_get_media_type_X540(struct ixgbe_hw *hw) +{ + return ixgbe_media_type_copper; +} + +static s32 ixgbe_get_invariants_X540(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + + /* Call PHY identify routine to get the phy type */ + ixgbe_identify_phy_generic(hw); + + mac->mcft_size = IXGBE_X540_MC_TBL_SIZE; + mac->vft_size = IXGBE_X540_VFT_TBL_SIZE; + mac->num_rar_entries = IXGBE_X540_RAR_ENTRIES; + mac->max_rx_queues = IXGBE_X540_MAX_RX_QUEUES; + mac->max_tx_queues = IXGBE_X540_MAX_TX_QUEUES; + mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw); + + return 0; +} + +/** + * ixgbe_setup_mac_link_X540 - Set the auto advertised capabilitires + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + * @autoneg_wait_to_complete: true when waiting for completion is needed + **/ +s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw, + ixgbe_link_speed speed, bool autoneg, + bool autoneg_wait_to_complete) +{ + return hw->phy.ops.setup_link_speed(hw, speed, autoneg, + autoneg_wait_to_complete); +} + +/** + * ixgbe_reset_hw_X540 - Perform hardware reset + * @hw: pointer to hardware structure + * + * Resets the hardware by resetting the transmit and receive units, masks + * and clears all interrupts, perform a PHY reset, and perform a link (MAC) + * reset. + **/ +s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw) +{ + ixgbe_link_speed link_speed; + s32 status = 0; + u32 ctrl; + u32 ctrl_ext; + u32 reset_bit; + u32 i; + u32 autoc; + u32 autoc2; + bool link_up = false; + + /* Call adapter stop to disable tx/rx and clear interrupts */ + hw->mac.ops.stop_adapter(hw); + + /* + * Prevent the PCI-E bus from from hanging by disabling PCI-E master + * access and verify no pending requests before reset + */ + status = ixgbe_disable_pcie_master(hw); + if (status != 0) { + status = IXGBE_ERR_MASTER_REQUESTS_PENDING; + hw_dbg(hw, "PCI-E Master disable polling has failed.\n"); + } + + /* + * Issue global reset to the MAC. Needs to be SW reset if link is up. + * If link reset is used when link is up, it might reset the PHY when + * mng is using it. If link is down or the flag to force full link + * reset is set, then perform link reset. + */ + if (hw->force_full_reset) { + reset_bit = IXGBE_CTRL_LNK_RST; + } else { + hw->mac.ops.check_link(hw, &link_speed, &link_up, false); + if (!link_up) + reset_bit = IXGBE_CTRL_LNK_RST; + else + reset_bit = IXGBE_CTRL_RST; + } + + ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); + IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | IXGBE_CTRL_RST)); + IXGBE_WRITE_FLUSH(hw); + + /* Poll for reset bit to self-clear indicating reset is complete */ + for (i = 0; i < 10; i++) { + udelay(1); + ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); + if (!(ctrl & IXGBE_CTRL_RST)) + break; + } + if (ctrl & IXGBE_CTRL_RST) { + status = IXGBE_ERR_RESET_FAILED; + hw_dbg(hw, "Reset polling failed to complete.\n"); + } + + /* Clear PF Reset Done bit so PF/VF Mail Ops can work */ + ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT); + ctrl_ext |= IXGBE_CTRL_EXT_PFRSTD; + IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext); + + msleep(50); + + /* Set the Rx packet buffer size. */ + IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(0), 384 << IXGBE_RXPBSIZE_SHIFT); + + /* Store the permanent mac address */ + hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); + + /* + * Store the original AUTOC/AUTOC2 values if they have not been + * stored off yet. Otherwise restore the stored original + * values since the reset operation sets back to defaults. + */ + autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); + if (hw->mac.orig_link_settings_stored == false) { + hw->mac.orig_autoc = autoc; + hw->mac.orig_autoc2 = autoc2; + hw->mac.orig_link_settings_stored = true; + } else { + if (autoc != hw->mac.orig_autoc) + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (hw->mac.orig_autoc | + IXGBE_AUTOC_AN_RESTART)); + + if ((autoc2 & IXGBE_AUTOC2_UPPER_MASK) != + (hw->mac.orig_autoc2 & IXGBE_AUTOC2_UPPER_MASK)) { + autoc2 &= ~IXGBE_AUTOC2_UPPER_MASK; + autoc2 |= (hw->mac.orig_autoc2 & + IXGBE_AUTOC2_UPPER_MASK); + IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2); + } + } + + /* + * Store MAC address from RAR0, clear receive address registers, and + * clear the multicast table. Also reset num_rar_entries to 128, + * since we modify this value when programming the SAN MAC address. + */ + hw->mac.num_rar_entries = 128; + hw->mac.ops.init_rx_addrs(hw); + + /* Store the permanent mac address */ + hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); + + /* Store the permanent SAN mac address */ + hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr); + + /* Add the SAN MAC address to the RAR only if it's a valid address */ + if (ixgbe_validate_mac_addr(hw->mac.san_addr) == 0) { + hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1, + hw->mac.san_addr, 0, IXGBE_RAH_AV); + + /* Reserve the last RAR for the SAN MAC address */ + hw->mac.num_rar_entries--; + } + + /* Store the alternative WWNN/WWPN prefix */ + hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix, + &hw->mac.wwpn_prefix); + + return status; +} + +/** + * ixgbe_get_supported_physical_layer_X540 - Returns physical layer type + * @hw: pointer to hardware structure + * + * Determines physical layer capabilities of the current configuration. + **/ +u32 ixgbe_get_supported_physical_layer_X540(struct ixgbe_hw *hw) +{ + u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; + u16 ext_ability = 0; + + hw->phy.ops.identify(hw); + + hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD, + &ext_ability); + if (ext_ability & MDIO_PMA_EXTABLE_10GBT) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T; + if (ext_ability & MDIO_PMA_EXTABLE_1000BT) + physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; + if (ext_ability & MDIO_PMA_EXTABLE_100BTX) + physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX; + + return physical_layer; +} + +/** + * ixgbe_init_eeprom_params_X540 - Initialize EEPROM params + * @hw: pointer to hardware structure + **/ +s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw) +{ + struct ixgbe_eeprom_info *eeprom = &hw->eeprom; + u32 eec; + u16 eeprom_size; + + if (eeprom->type == ixgbe_eeprom_uninitialized) { + eeprom->semaphore_delay = 10; + eeprom->type = ixgbe_flash; + + eec = IXGBE_READ_REG(hw, IXGBE_EEC); + eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >> + IXGBE_EEC_SIZE_SHIFT); + eeprom->word_size = 1 << (eeprom_size + + IXGBE_EEPROM_WORD_SIZE_SHIFT); + + hw_dbg(hw, "Eeprom params: type = %d, size = %d\n", + eeprom->type, eeprom->word_size); + } + + return 0; +} + +/** + * ixgbe_read_eerd_X540 - Read EEPROM word using EERD + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @data: word read from the EERPOM + **/ +s32 ixgbe_read_eerd_X540(struct ixgbe_hw *hw, u16 offset, u16 *data) +{ + s32 status; + + if (ixgbe_acquire_swfw_sync_X540(hw, IXGBE_GSSR_EEP_SM)) + status = ixgbe_read_eerd_generic(hw, offset, data); + else + status = IXGBE_ERR_SWFW_SYNC; + + ixgbe_release_swfw_sync_X540(hw, IXGBE_GSSR_EEP_SM); + return status; +} + +/** + * ixgbe_write_eewr_X540 - Write EEPROM word using EEWR + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to write + * @data: word write to the EEPROM + * + * Write a 16 bit word to the EEPROM using the EEWR register. + **/ +s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data) +{ + u32 eewr; + s32 status; + + hw->eeprom.ops.init_params(hw); + + if (offset >= hw->eeprom.word_size) { + status = IXGBE_ERR_EEPROM; + goto out; + } + + eewr = (offset << IXGBE_EEPROM_RW_ADDR_SHIFT) | + (data << IXGBE_EEPROM_RW_REG_DATA) | + IXGBE_EEPROM_RW_REG_START; + + if (ixgbe_acquire_swfw_sync_X540(hw, IXGBE_GSSR_EEP_SM)) { + status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE); + if (status != 0) { + hw_dbg(hw, "Eeprom write EEWR timed out\n"); + goto out; + } + + IXGBE_WRITE_REG(hw, IXGBE_EEWR, eewr); + + status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE); + if (status != 0) { + hw_dbg(hw, "Eeprom write EEWR timed out\n"); + goto out; + } + } else { + status = IXGBE_ERR_SWFW_SYNC; + } + +out: + ixgbe_release_swfw_sync_X540(hw, IXGBE_GSSR_EEP_SM); + return status; +} + +/** + * ixgbe_calc_eeprom_checksum_X540 - Calculates and returns the checksum + * @hw: pointer to hardware structure + **/ +static u16 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw) +{ + u16 i; + u16 j; + u16 checksum = 0; + u16 length = 0; + u16 pointer = 0; + u16 word = 0; + + /* Include 0x0-0x3F in the checksum */ + for (i = 0; i < IXGBE_EEPROM_CHECKSUM; i++) { + if (hw->eeprom.ops.read(hw, i, &word) != 0) { + hw_dbg(hw, "EEPROM read failed\n"); + break; + } + checksum += word; + } + + /* + * Include all data from pointers 0x3, 0x6-0xE. This excludes the + * FW, PHY module, and PCIe Expansion/Option ROM pointers. + */ + for (i = IXGBE_PCIE_ANALOG_PTR; i < IXGBE_FW_PTR; i++) { + if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR) + continue; + + if (hw->eeprom.ops.read(hw, i, &pointer) != 0) { + hw_dbg(hw, "EEPROM read failed\n"); + break; + } + + /* Skip pointer section if the pointer is invalid. */ + if (pointer == 0xFFFF || pointer == 0 || + pointer >= hw->eeprom.word_size) + continue; + + if (hw->eeprom.ops.read(hw, pointer, &length) != 0) { + hw_dbg(hw, "EEPROM read failed\n"); + break; + } + + /* Skip pointer section if length is invalid. */ + if (length == 0xFFFF || length == 0 || + (pointer + length) >= hw->eeprom.word_size) + continue; + + for (j = pointer+1; j <= pointer+length; j++) { + if (hw->eeprom.ops.read(hw, j, &word) != 0) { + hw_dbg(hw, "EEPROM read failed\n"); + break; + } + checksum += word; + } + } + + checksum = (u16)IXGBE_EEPROM_SUM - checksum; + + return checksum; +} + +/** + * ixgbe_update_eeprom_checksum_X540 - Updates the EEPROM checksum and flash + * @hw: pointer to hardware structure + * + * After writing EEPROM to shadow RAM using EEWR register, software calculates + * checksum and updates the EEPROM and instructs the hardware to update + * the flash. + **/ +s32 ixgbe_update_eeprom_checksum_X540(struct ixgbe_hw *hw) +{ + s32 status; + + status = ixgbe_update_eeprom_checksum_generic(hw); + + if (status) + status = ixgbe_update_flash_X540(hw); + + return status; +} + +/** + * ixgbe_update_flash_X540 - Instruct HW to copy EEPROM to Flash device + * @hw: pointer to hardware structure + * + * Set FLUP (bit 23) of the EEC register to instruct Hardware to copy + * EEPROM from shadow RAM to the flash device. + **/ +static s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw) +{ + u32 flup; + s32 status = IXGBE_ERR_EEPROM; + + status = ixgbe_poll_flash_update_done_X540(hw); + if (status == IXGBE_ERR_EEPROM) { + hw_dbg(hw, "Flash update time out\n"); + goto out; + } + + flup = IXGBE_READ_REG(hw, IXGBE_EEC) | IXGBE_EEC_FLUP; + IXGBE_WRITE_REG(hw, IXGBE_EEC, flup); + + status = ixgbe_poll_flash_update_done_X540(hw); + if (status) + hw_dbg(hw, "Flash update complete\n"); + else + hw_dbg(hw, "Flash update time out\n"); + + if (hw->revision_id == 0) { + flup = IXGBE_READ_REG(hw, IXGBE_EEC); + + if (flup & IXGBE_EEC_SEC1VAL) { + flup |= IXGBE_EEC_FLUP; + IXGBE_WRITE_REG(hw, IXGBE_EEC, flup); + } + + status = ixgbe_poll_flash_update_done_X540(hw); + if (status) + hw_dbg(hw, "Flash update complete\n"); + else + hw_dbg(hw, "Flash update time out\n"); + + } +out: + return status; +} + +/** + * ixgbe_poll_flash_update_done_X540 - Poll flash update status + * @hw: pointer to hardware structure + * + * Polls the FLUDONE (bit 26) of the EEC Register to determine when the + * flash update is done. + **/ +static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw) +{ + u32 i; + u32 reg; + s32 status = IXGBE_ERR_EEPROM; + + for (i = 0; i < IXGBE_FLUDONE_ATTEMPTS; i++) { + reg = IXGBE_READ_REG(hw, IXGBE_EEC); + if (reg & IXGBE_EEC_FLUDONE) { + status = 0; + break; + } + udelay(5); + } + return status; +} + +/** + * ixgbe_acquire_swfw_sync_X540 - Acquire SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to acquire + * + * Acquires the SWFW semaphore thought the SW_FW_SYNC register for + * the specified function (CSR, PHY0, PHY1, NVM, Flash) + **/ +static s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask) +{ + u32 swfw_sync; + u32 swmask = mask; + u32 fwmask = mask << 5; + u32 hwmask = 0; + u32 timeout = 200; + u32 i; + + if (swmask == IXGBE_GSSR_EEP_SM) + hwmask = IXGBE_GSSR_FLASH_SM; + + for (i = 0; i < timeout; i++) { + /* + * SW NVM semaphore bit is used for access to all + * SW_FW_SYNC bits (not just NVM) + */ + if (ixgbe_get_swfw_sync_semaphore(hw)) + return IXGBE_ERR_SWFW_SYNC; + + swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC); + if (!(swfw_sync & (fwmask | swmask | hwmask))) { + swfw_sync |= swmask; + IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync); + ixgbe_release_swfw_sync_semaphore(hw); + break; + } else { + /* + * Firmware currently using resource (fwmask), + * hardware currently using resource (hwmask), + * or other software thread currently using + * resource (swmask) + */ + ixgbe_release_swfw_sync_semaphore(hw); + msleep(5); + } + } + + /* + * If the resource is not released by the FW/HW the SW can assume that + * the FW/HW malfunctions. In that case the SW should sets the + * SW bit(s) of the requested resource(s) while ignoring the + * corresponding FW/HW bits in the SW_FW_SYNC register. + */ + if (i >= timeout) { + swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC); + if (swfw_sync & (fwmask | hwmask)) { + if (ixgbe_get_swfw_sync_semaphore(hw)) + return IXGBE_ERR_SWFW_SYNC; + + swfw_sync |= swmask; + IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync); + ixgbe_release_swfw_sync_semaphore(hw); + } + } + + msleep(5); + return 0; +} + +/** + * ixgbe_release_swfw_sync_X540 - Release SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to release + * + * Releases the SWFW semaphore throught the SW_FW_SYNC register + * for the specified function (CSR, PHY0, PHY1, EVM, Flash) + **/ +static void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask) +{ + u32 swfw_sync; + u32 swmask = mask; + + ixgbe_get_swfw_sync_semaphore(hw); + + swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC); + swfw_sync &= ~swmask; + IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync); + + ixgbe_release_swfw_sync_semaphore(hw); + msleep(5); +} + +/** + * ixgbe_get_nvm_semaphore - Get hardware semaphore + * @hw: pointer to hardware structure + * + * Sets the hardware semaphores so SW/FW can gain control of shared resources + **/ +static s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_ERR_EEPROM; + u32 timeout = 2000; + u32 i; + u32 swsm; + + /* Get SMBI software semaphore between device drivers first */ + for (i = 0; i < timeout; i++) { + /* + * If the SMBI bit is 0 when we read it, then the bit will be + * set and we have the semaphore + */ + swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); + if (!(swsm & IXGBE_SWSM_SMBI)) { + status = 0; + break; + } + udelay(50); + } + + /* Now get the semaphore between SW/FW through the REGSMP bit */ + if (status) { + for (i = 0; i < timeout; i++) { + swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC); + if (!(swsm & IXGBE_SWFW_REGSMP)) + break; + + udelay(50); + } + } else { + hw_dbg(hw, "Software semaphore SMBI between device drivers " + "not granted.\n"); + } + + return status; +} + +/** + * ixgbe_release_nvm_semaphore - Release hardware semaphore + * @hw: pointer to hardware structure + * + * This function clears hardware semaphore bits. + **/ +static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw) +{ + u32 swsm; + + /* Release both semaphores by writing 0 to the bits REGSMP and SMBI */ + + swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); + swsm &= ~IXGBE_SWSM_SMBI; + IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm); + + swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC); + swsm &= ~IXGBE_SWFW_REGSMP; + IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swsm); + + IXGBE_WRITE_FLUSH(hw); +} + +static struct ixgbe_mac_operations mac_ops_X540 = { + .init_hw = &ixgbe_init_hw_generic, + .reset_hw = &ixgbe_reset_hw_X540, + .start_hw = &ixgbe_start_hw_generic, + .clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic, + .get_media_type = &ixgbe_get_media_type_X540, + .get_supported_physical_layer = + &ixgbe_get_supported_physical_layer_X540, + .enable_rx_dma = &ixgbe_enable_rx_dma_generic, + .get_mac_addr = &ixgbe_get_mac_addr_generic, + .get_san_mac_addr = &ixgbe_get_san_mac_addr_generic, + .get_device_caps = NULL, + .get_wwn_prefix = &ixgbe_get_wwn_prefix_generic, + .stop_adapter = &ixgbe_stop_adapter_generic, + .get_bus_info = &ixgbe_get_bus_info_generic, + .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie, + .read_analog_reg8 = NULL, + .write_analog_reg8 = NULL, + .setup_link = &ixgbe_setup_mac_link_X540, + .check_link = &ixgbe_check_mac_link_generic, + .get_link_capabilities = &ixgbe_get_copper_link_capabilities_generic, + .led_on = &ixgbe_led_on_generic, + .led_off = &ixgbe_led_off_generic, + .blink_led_start = &ixgbe_blink_led_start_generic, + .blink_led_stop = &ixgbe_blink_led_stop_generic, + .set_rar = &ixgbe_set_rar_generic, + .clear_rar = &ixgbe_clear_rar_generic, + .set_vmdq = &ixgbe_set_vmdq_generic, + .clear_vmdq = &ixgbe_clear_vmdq_generic, + .init_rx_addrs = &ixgbe_init_rx_addrs_generic, + .update_uc_addr_list = &ixgbe_update_uc_addr_list_generic, + .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic, + .enable_mc = &ixgbe_enable_mc_generic, + .disable_mc = &ixgbe_disable_mc_generic, + .clear_vfta = &ixgbe_clear_vfta_generic, + .set_vfta = &ixgbe_set_vfta_generic, + .fc_enable = &ixgbe_fc_enable_generic, + .init_uta_tables = &ixgbe_init_uta_tables_generic, + .setup_sfp = NULL, +}; + +static struct ixgbe_eeprom_operations eeprom_ops_X540 = { + .init_params = &ixgbe_init_eeprom_params_X540, + .read = &ixgbe_read_eerd_X540, + .write = &ixgbe_write_eewr_X540, + .calc_checksum = &ixgbe_calc_eeprom_checksum_X540, + .validate_checksum = &ixgbe_validate_eeprom_checksum_generic, + .update_checksum = &ixgbe_update_eeprom_checksum_X540, +}; + +static struct ixgbe_phy_operations phy_ops_X540 = { + .identify = &ixgbe_identify_phy_generic, + .identify_sfp = &ixgbe_identify_sfp_module_generic, + .init = NULL, + .reset = &ixgbe_reset_phy_generic, + .read_reg = &ixgbe_read_phy_reg_generic, + .write_reg = &ixgbe_write_phy_reg_generic, + .setup_link = &ixgbe_setup_phy_link_generic, + .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, + .read_i2c_byte = &ixgbe_read_i2c_byte_generic, + .write_i2c_byte = &ixgbe_write_i2c_byte_generic, + .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic, + .write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic, + .check_overtemp = &ixgbe_tn_check_overtemp, +}; + +struct ixgbe_info ixgbe_X540_info = { + .mac = ixgbe_mac_X540, + .get_invariants = &ixgbe_get_invariants_X540, + .mac_ops = &mac_ops_X540, + .eeprom_ops = &eeprom_ops_X540, + .phy_ops = &phy_ops_X540, + .mbx_ops = &mbx_ops_generic, +}; |