diff options
author | Ben Hutchings <bhutchings@solarflare.com> | 2008-05-30 23:27:04 +0200 |
---|---|---|
committer | Jeff Garzik <jgarzik@redhat.com> | 2008-05-31 04:18:10 +0200 |
commit | 37b5a60335305e46be93c2eb904c8b5be7aba5f6 (patch) | |
tree | 4bda528e3493a5a3a57950b37dc465e593697182 /drivers/net | |
parent | cxgb3: fix build error when INET=n (diff) | |
download | linux-37b5a60335305e46be93c2eb904c8b5be7aba5f6.tar.xz linux-37b5a60335305e46be93c2eb904c8b5be7aba5f6.zip |
sfc: Use kernel I2C system and i2c-algo-bit driver
Remove our own implementation of I2C bit-banging.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/sfc/Kconfig | 2 | ||||
-rw-r--r-- | drivers/net/sfc/Makefile | 2 | ||||
-rw-r--r-- | drivers/net/sfc/boards.c | 2 | ||||
-rw-r--r-- | drivers/net/sfc/boards.h | 3 | ||||
-rw-r--r-- | drivers/net/sfc/efx.c | 2 | ||||
-rw-r--r-- | drivers/net/sfc/falcon.c | 72 | ||||
-rw-r--r-- | drivers/net/sfc/i2c-direct.c | 381 | ||||
-rw-r--r-- | drivers/net/sfc/i2c-direct.h | 91 | ||||
-rw-r--r-- | drivers/net/sfc/net_driver.h | 11 | ||||
-rw-r--r-- | drivers/net/sfc/sfe4001.c | 126 |
10 files changed, 133 insertions, 559 deletions
diff --git a/drivers/net/sfc/Kconfig b/drivers/net/sfc/Kconfig index dbad95c295bd..3be13b592b4d 100644 --- a/drivers/net/sfc/Kconfig +++ b/drivers/net/sfc/Kconfig @@ -4,6 +4,8 @@ config SFC select MII select INET_LRO select CRC32 + select I2C + select I2C_ALGOBIT help This driver supports 10-gigabit Ethernet cards based on the Solarflare Communications Solarstorm SFC4000 controller. diff --git a/drivers/net/sfc/Makefile b/drivers/net/sfc/Makefile index 1d2daeec7ac1..c8f5704c8fb1 100644 --- a/drivers/net/sfc/Makefile +++ b/drivers/net/sfc/Makefile @@ -1,5 +1,5 @@ sfc-y += efx.o falcon.o tx.o rx.o falcon_xmac.o \ - i2c-direct.o selftest.o ethtool.o xfp_phy.o \ + selftest.o ethtool.o xfp_phy.o \ mdio_10g.o tenxpress.o boards.o sfe4001.o obj-$(CONFIG_SFC) += sfc.o diff --git a/drivers/net/sfc/boards.c b/drivers/net/sfc/boards.c index 7fc0328dc055..d3d3dd0a1170 100644 --- a/drivers/net/sfc/boards.c +++ b/drivers/net/sfc/boards.c @@ -109,7 +109,7 @@ static struct efx_board_data board_data[] = { [EFX_BOARD_INVALID] = {NULL, NULL, dummy_init}, [EFX_BOARD_SFE4001] = - {"SFE4001", "10GBASE-T adapter", sfe4001_poweron}, + {"SFE4001", "10GBASE-T adapter", sfe4001_init}, [EFX_BOARD_SFE4002] = {"SFE4002", "XFP adapter", sfe4002_init}, }; diff --git a/drivers/net/sfc/boards.h b/drivers/net/sfc/boards.h index 695764dc2e64..e5e844359ce7 100644 --- a/drivers/net/sfc/boards.h +++ b/drivers/net/sfc/boards.h @@ -20,8 +20,7 @@ enum efx_board_type { }; extern int efx_set_board_info(struct efx_nic *efx, u16 revision_info); -extern int sfe4001_poweron(struct efx_nic *efx); -extern void sfe4001_poweroff(struct efx_nic *efx); +extern int sfe4001_init(struct efx_nic *efx); /* Are we putting the PHY into flash config mode */ extern unsigned int sfe4001_phy_flash_cfg; diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index 449760642e31..74265d8553b8 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -1815,6 +1815,7 @@ static struct efx_board efx_dummy_board_info = { .init = efx_nic_dummy_op_int, .init_leds = efx_port_dummy_op_int, .set_fault_led = efx_port_dummy_op_blink, + .fini = efx_port_dummy_op_void, }; /************************************************************************** @@ -1941,6 +1942,7 @@ static void efx_pci_remove_main(struct efx_nic *efx) efx_fini_port(efx); /* Shutdown the board, then the NIC and board state */ + efx->board_info.fini(efx); falcon_fini_interrupt(efx); efx_fini_napi(efx); diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index d3f749c72d41..8acd53de5e7c 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -13,6 +13,8 @@ #include <linux/pci.h> #include <linux/module.h> #include <linux/seq_file.h> +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> #include "net_driver.h" #include "bitfield.h" #include "efx.h" @@ -36,10 +38,12 @@ * struct falcon_nic_data - Falcon NIC state * @next_buffer_table: First available buffer table id * @pci_dev2: The secondary PCI device if present + * @i2c_data: Operations and state for I2C bit-bashing algorithm */ struct falcon_nic_data { unsigned next_buffer_table; struct pci_dev *pci_dev2; + struct i2c_algo_bit_data i2c_data; }; /************************************************************************** @@ -175,39 +179,57 @@ static inline int falcon_event_present(efx_qword_t *event) * ************************************************************************** */ -static void falcon_setsdascl(struct efx_i2c_interface *i2c) +static void falcon_setsda(void *data, int state) { + struct efx_nic *efx = (struct efx_nic *)data; efx_oword_t reg; - falcon_read(i2c->efx, ®, GPIO_CTL_REG_KER); - EFX_SET_OWORD_FIELD(reg, GPIO0_OEN, (i2c->scl ? 0 : 1)); - EFX_SET_OWORD_FIELD(reg, GPIO3_OEN, (i2c->sda ? 0 : 1)); - falcon_write(i2c->efx, ®, GPIO_CTL_REG_KER); + falcon_read(efx, ®, GPIO_CTL_REG_KER); + EFX_SET_OWORD_FIELD(reg, GPIO3_OEN, !state); + falcon_write(efx, ®, GPIO_CTL_REG_KER); } -static int falcon_getsda(struct efx_i2c_interface *i2c) +static void falcon_setscl(void *data, int state) { + struct efx_nic *efx = (struct efx_nic *)data; efx_oword_t reg; - falcon_read(i2c->efx, ®, GPIO_CTL_REG_KER); + falcon_read(efx, ®, GPIO_CTL_REG_KER); + EFX_SET_OWORD_FIELD(reg, GPIO0_OEN, !state); + falcon_write(efx, ®, GPIO_CTL_REG_KER); +} + +static int falcon_getsda(void *data) +{ + struct efx_nic *efx = (struct efx_nic *)data; + efx_oword_t reg; + + falcon_read(efx, ®, GPIO_CTL_REG_KER); return EFX_OWORD_FIELD(reg, GPIO3_IN); } -static int falcon_getscl(struct efx_i2c_interface *i2c) +static int falcon_getscl(void *data) { + struct efx_nic *efx = (struct efx_nic *)data; efx_oword_t reg; - falcon_read(i2c->efx, ®, GPIO_CTL_REG_KER); - return EFX_DWORD_FIELD(reg, GPIO0_IN); + falcon_read(efx, ®, GPIO_CTL_REG_KER); + return EFX_OWORD_FIELD(reg, GPIO0_IN); } -static struct efx_i2c_bit_operations falcon_i2c_bit_operations = { - .setsda = falcon_setsdascl, - .setscl = falcon_setsdascl, +static struct i2c_algo_bit_data falcon_i2c_bit_operations = { + .setsda = falcon_setsda, + .setscl = falcon_setscl, .getsda = falcon_getsda, .getscl = falcon_getscl, .udelay = 100, - .mdelay = 10, + /* + * This is the number of system clock ticks after which + * i2c-algo-bit gives up waiting for SCL to become high. + * It must be at least 2 since the first tick can happen + * immediately after it starts waiting. + */ + .timeout = 2, }; /************************************************************************** @@ -2403,12 +2425,6 @@ int falcon_probe_nic(struct efx_nic *efx) struct falcon_nic_data *nic_data; int rc; - /* Initialise I2C interface state */ - efx->i2c.efx = efx; - efx->i2c.op = &falcon_i2c_bit_operations; - efx->i2c.sda = 1; - efx->i2c.scl = 1; - /* Allocate storage for hardware specific data */ nic_data = kzalloc(sizeof(*nic_data), GFP_KERNEL); efx->nic_data = nic_data; @@ -2459,6 +2475,18 @@ int falcon_probe_nic(struct efx_nic *efx) if (rc) goto fail5; + /* Initialise I2C adapter */ + efx->i2c_adap.owner = THIS_MODULE; + efx->i2c_adap.class = I2C_CLASS_HWMON; + nic_data->i2c_data = falcon_i2c_bit_operations; + nic_data->i2c_data.data = efx; + efx->i2c_adap.algo_data = &nic_data->i2c_data; + efx->i2c_adap.dev.parent = &efx->pci_dev->dev; + strcpy(efx->i2c_adap.name, "SFC4000 GPIO"); + rc = i2c_bit_add_bus(&efx->i2c_adap); + if (rc) + goto fail5; + return 0; fail5: @@ -2633,6 +2661,10 @@ int falcon_init_nic(struct efx_nic *efx) void falcon_remove_nic(struct efx_nic *efx) { struct falcon_nic_data *nic_data = efx->nic_data; + int rc; + + rc = i2c_del_adapter(&efx->i2c_adap); + BUG_ON(rc); falcon_free_buffer(efx, &efx->irq_status); diff --git a/drivers/net/sfc/i2c-direct.c b/drivers/net/sfc/i2c-direct.c deleted file mode 100644 index b6c62d0ed9c2..000000000000 --- a/drivers/net/sfc/i2c-direct.c +++ /dev/null @@ -1,381 +0,0 @@ -/**************************************************************************** - * Driver for Solarflare Solarstorm network controllers and boards - * Copyright 2005 Fen Systems Ltd. - * Copyright 2006-2008 Solarflare Communications Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation, incorporated herein by reference. - */ - -#include <linux/delay.h> -#include "net_driver.h" -#include "i2c-direct.h" - -/* - * I2C data (SDA) and clock (SCL) line read/writes with appropriate - * delays. - */ - -static inline void setsda(struct efx_i2c_interface *i2c, int state) -{ - udelay(i2c->op->udelay); - i2c->sda = state; - i2c->op->setsda(i2c); - udelay(i2c->op->udelay); -} - -static inline void setscl(struct efx_i2c_interface *i2c, int state) -{ - udelay(i2c->op->udelay); - i2c->scl = state; - i2c->op->setscl(i2c); - udelay(i2c->op->udelay); -} - -static inline int getsda(struct efx_i2c_interface *i2c) -{ - int sda; - - udelay(i2c->op->udelay); - sda = i2c->op->getsda(i2c); - udelay(i2c->op->udelay); - return sda; -} - -static inline int getscl(struct efx_i2c_interface *i2c) -{ - int scl; - - udelay(i2c->op->udelay); - scl = i2c->op->getscl(i2c); - udelay(i2c->op->udelay); - return scl; -} - -/* - * I2C low-level protocol operations - * - */ - -static inline void i2c_release(struct efx_i2c_interface *i2c) -{ - EFX_WARN_ON_PARANOID(!i2c->scl); - EFX_WARN_ON_PARANOID(!i2c->sda); - /* Devices may time out if operations do not end */ - setscl(i2c, 1); - setsda(i2c, 1); - EFX_BUG_ON_PARANOID(getsda(i2c) != 1); - EFX_BUG_ON_PARANOID(getscl(i2c) != 1); -} - -static inline void i2c_start(struct efx_i2c_interface *i2c) -{ - /* We may be restarting immediately after a {send,recv}_bit, - * so SCL will not necessarily already be high. - */ - EFX_WARN_ON_PARANOID(!i2c->sda); - setscl(i2c, 1); - setsda(i2c, 0); - setscl(i2c, 0); - setsda(i2c, 1); -} - -static inline void i2c_send_bit(struct efx_i2c_interface *i2c, int bit) -{ - EFX_WARN_ON_PARANOID(i2c->scl != 0); - setsda(i2c, bit); - setscl(i2c, 1); - setscl(i2c, 0); - setsda(i2c, 1); -} - -static inline int i2c_recv_bit(struct efx_i2c_interface *i2c) -{ - int bit; - - EFX_WARN_ON_PARANOID(i2c->scl != 0); - EFX_WARN_ON_PARANOID(!i2c->sda); - setscl(i2c, 1); - bit = getsda(i2c); - setscl(i2c, 0); - return bit; -} - -static inline void i2c_stop(struct efx_i2c_interface *i2c) -{ - EFX_WARN_ON_PARANOID(i2c->scl != 0); - setsda(i2c, 0); - setscl(i2c, 1); - setsda(i2c, 1); -} - -/* - * I2C mid-level protocol operations - * - */ - -/* Sends a byte via the I2C bus and checks for an acknowledgement from - * the slave device. - */ -static int i2c_send_byte(struct efx_i2c_interface *i2c, u8 byte) -{ - int i; - - /* Send byte */ - for (i = 0; i < 8; i++) { - i2c_send_bit(i2c, !!(byte & 0x80)); - byte <<= 1; - } - - /* Check for acknowledgement from slave */ - return (i2c_recv_bit(i2c) == 0 ? 0 : -EIO); -} - -/* Receives a byte via the I2C bus and sends ACK/NACK to the slave device. */ -static u8 i2c_recv_byte(struct efx_i2c_interface *i2c, int ack) -{ - u8 value = 0; - int i; - - /* Receive byte */ - for (i = 0; i < 8; i++) - value = (value << 1) | i2c_recv_bit(i2c); - - /* Send ACK/NACK */ - i2c_send_bit(i2c, (ack ? 0 : 1)); - - return value; -} - -/* Calculate command byte for a read operation */ -static inline u8 i2c_read_cmd(u8 device_id) -{ - return ((device_id << 1) | 1); -} - -/* Calculate command byte for a write operation */ -static inline u8 i2c_write_cmd(u8 device_id) -{ - return ((device_id << 1) | 0); -} - -int efx_i2c_check_presence(struct efx_i2c_interface *i2c, u8 device_id) -{ - int rc; - - /* If someone is driving the bus low we just give up. */ - if (getsda(i2c) == 0 || getscl(i2c) == 0) { - EFX_ERR(i2c->efx, "%s someone is holding the I2C bus low." - " Giving up.\n", __func__); - return -EFAULT; - } - - /* Pretend to initiate a device write */ - i2c_start(i2c); - rc = i2c_send_byte(i2c, i2c_write_cmd(device_id)); - if (rc) - goto out; - - out: - i2c_stop(i2c); - i2c_release(i2c); - - return rc; -} - -/* This performs a fast read of one or more consecutive bytes from an - * I2C device. Not all devices support consecutive reads of more than - * one byte; for these devices use efx_i2c_read() instead. - */ -int efx_i2c_fast_read(struct efx_i2c_interface *i2c, - u8 device_id, u8 offset, u8 *data, unsigned int len) -{ - int i; - int rc; - - EFX_WARN_ON_PARANOID(getsda(i2c) != 1); - EFX_WARN_ON_PARANOID(getscl(i2c) != 1); - EFX_WARN_ON_PARANOID(data == NULL); - EFX_WARN_ON_PARANOID(len < 1); - - /* Select device and starting offset */ - i2c_start(i2c); - rc = i2c_send_byte(i2c, i2c_write_cmd(device_id)); - if (rc) - goto out; - rc = i2c_send_byte(i2c, offset); - if (rc) - goto out; - - /* Read data from device */ - i2c_start(i2c); - rc = i2c_send_byte(i2c, i2c_read_cmd(device_id)); - if (rc) - goto out; - for (i = 0; i < (len - 1); i++) - /* Read and acknowledge all but the last byte */ - data[i] = i2c_recv_byte(i2c, 1); - /* Read last byte with no acknowledgement */ - data[i] = i2c_recv_byte(i2c, 0); - - out: - i2c_stop(i2c); - i2c_release(i2c); - - return rc; -} - -/* This performs a fast write of one or more consecutive bytes to an - * I2C device. Not all devices support consecutive writes of more - * than one byte; for these devices use efx_i2c_write() instead. - */ -int efx_i2c_fast_write(struct efx_i2c_interface *i2c, - u8 device_id, u8 offset, - const u8 *data, unsigned int len) -{ - int i; - int rc; - - EFX_WARN_ON_PARANOID(getsda(i2c) != 1); - EFX_WARN_ON_PARANOID(getscl(i2c) != 1); - EFX_WARN_ON_PARANOID(len < 1); - - /* Select device and starting offset */ - i2c_start(i2c); - rc = i2c_send_byte(i2c, i2c_write_cmd(device_id)); - if (rc) - goto out; - rc = i2c_send_byte(i2c, offset); - if (rc) - goto out; - - /* Write data to device */ - for (i = 0; i < len; i++) { - rc = i2c_send_byte(i2c, data[i]); - if (rc) - goto out; - } - - out: - i2c_stop(i2c); - i2c_release(i2c); - - return rc; -} - -/* I2C byte-by-byte read */ -int efx_i2c_read(struct efx_i2c_interface *i2c, - u8 device_id, u8 offset, u8 *data, unsigned int len) -{ - int rc; - - /* i2c_fast_read with length 1 is a single byte read */ - for (; len > 0; offset++, data++, len--) { - rc = efx_i2c_fast_read(i2c, device_id, offset, data, 1); - if (rc) - return rc; - } - - return 0; -} - -/* I2C byte-by-byte write */ -int efx_i2c_write(struct efx_i2c_interface *i2c, - u8 device_id, u8 offset, const u8 *data, unsigned int len) -{ - int rc; - - /* i2c_fast_write with length 1 is a single byte write */ - for (; len > 0; offset++, data++, len--) { - rc = efx_i2c_fast_write(i2c, device_id, offset, data, 1); - if (rc) - return rc; - mdelay(i2c->op->mdelay); - } - - return 0; -} - - -/* This is just a slightly neater wrapper round efx_i2c_fast_write - * in the case where the target doesn't take an offset - */ -int efx_i2c_send_bytes(struct efx_i2c_interface *i2c, - u8 device_id, const u8 *data, unsigned int len) -{ - return efx_i2c_fast_write(i2c, device_id, data[0], data + 1, len - 1); -} - -/* I2C receiving of bytes - does not send an offset byte */ -int efx_i2c_recv_bytes(struct efx_i2c_interface *i2c, u8 device_id, - u8 *bytes, unsigned int len) -{ - int i; - int rc; - - EFX_WARN_ON_PARANOID(getsda(i2c) != 1); - EFX_WARN_ON_PARANOID(getscl(i2c) != 1); - EFX_WARN_ON_PARANOID(len < 1); - - /* Select device */ - i2c_start(i2c); - - /* Read data from device */ - rc = i2c_send_byte(i2c, i2c_read_cmd(device_id)); - if (rc) - goto out; - - for (i = 0; i < (len - 1); i++) - /* Read and acknowledge all but the last byte */ - bytes[i] = i2c_recv_byte(i2c, 1); - /* Read last byte with no acknowledgement */ - bytes[i] = i2c_recv_byte(i2c, 0); - - out: - i2c_stop(i2c); - i2c_release(i2c); - - return rc; -} - -/* SMBus and some I2C devices will time out if the I2C clock is - * held low for too long. This is most likely to happen in virtualised - * systems (when the entire domain is descheduled) but could in - * principle happen due to preemption on any busy system (and given the - * potential length of an I2C operation turning preemption off is not - * a sensible option). The following functions deal with the failure by - * retrying up to a fixed number of times. - */ - -#define I2C_MAX_RETRIES (10) - -/* The timeout problem will result in -EIO. If the wrapped function - * returns any other error, pass this up and do not retry. */ -#define RETRY_WRAPPER(_f) \ - int retries = I2C_MAX_RETRIES; \ - int rc; \ - while (retries) { \ - rc = _f; \ - if (rc != -EIO) \ - return rc; \ - retries--; \ - } \ - return rc; \ - -int efx_i2c_check_presence_retry(struct efx_i2c_interface *i2c, u8 device_id) -{ - RETRY_WRAPPER(efx_i2c_check_presence(i2c, device_id)) -} - -int efx_i2c_read_retry(struct efx_i2c_interface *i2c, - u8 device_id, u8 offset, u8 *data, unsigned int len) -{ - RETRY_WRAPPER(efx_i2c_read(i2c, device_id, offset, data, len)) -} - -int efx_i2c_write_retry(struct efx_i2c_interface *i2c, - u8 device_id, u8 offset, const u8 *data, unsigned int len) -{ - RETRY_WRAPPER(efx_i2c_write(i2c, device_id, offset, data, len)) -} diff --git a/drivers/net/sfc/i2c-direct.h b/drivers/net/sfc/i2c-direct.h deleted file mode 100644 index 291e561071f5..000000000000 --- a/drivers/net/sfc/i2c-direct.h +++ /dev/null @@ -1,91 +0,0 @@ -/**************************************************************************** - * Driver for Solarflare Solarstorm network controllers and boards - * Copyright 2005 Fen Systems Ltd. - * Copyright 2006 Solarflare Communications Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation, incorporated herein by reference. - */ - -#ifndef EFX_I2C_DIRECT_H -#define EFX_I2C_DIRECT_H - -#include "net_driver.h" - -/* - * Direct control of an I2C bus - */ - -struct efx_i2c_interface; - -/** - * struct efx_i2c_bit_operations - I2C bus direct control methods - * - * I2C bus direct control methods. - * - * @setsda: Set state of SDA line - * @setscl: Set state of SCL line - * @getsda: Get state of SDA line - * @getscl: Get state of SCL line - * @udelay: Delay between each bit operation - * @mdelay: Delay between each byte write - */ -struct efx_i2c_bit_operations { - void (*setsda) (struct efx_i2c_interface *i2c); - void (*setscl) (struct efx_i2c_interface *i2c); - int (*getsda) (struct efx_i2c_interface *i2c); - int (*getscl) (struct efx_i2c_interface *i2c); - unsigned int udelay; - unsigned int mdelay; -}; - -/** - * struct efx_i2c_interface - an I2C interface - * - * An I2C interface. - * - * @efx: Attached Efx NIC - * @op: I2C bus control methods - * @sda: Current output state of SDA line - * @scl: Current output state of SCL line - */ -struct efx_i2c_interface { - struct efx_nic *efx; - struct efx_i2c_bit_operations *op; - unsigned int sda:1; - unsigned int scl:1; -}; - -extern int efx_i2c_check_presence(struct efx_i2c_interface *i2c, u8 device_id); -extern int efx_i2c_fast_read(struct efx_i2c_interface *i2c, - u8 device_id, u8 offset, - u8 *data, unsigned int len); -extern int efx_i2c_fast_write(struct efx_i2c_interface *i2c, - u8 device_id, u8 offset, - const u8 *data, unsigned int len); -extern int efx_i2c_read(struct efx_i2c_interface *i2c, - u8 device_id, u8 offset, u8 *data, unsigned int len); -extern int efx_i2c_write(struct efx_i2c_interface *i2c, - u8 device_id, u8 offset, - const u8 *data, unsigned int len); - -extern int efx_i2c_send_bytes(struct efx_i2c_interface *i2c, u8 device_id, - const u8 *bytes, unsigned int len); - -extern int efx_i2c_recv_bytes(struct efx_i2c_interface *i2c, u8 device_id, - u8 *bytes, unsigned int len); - - -/* Versions of the API that retry on failure. */ -extern int efx_i2c_check_presence_retry(struct efx_i2c_interface *i2c, - u8 device_id); - -extern int efx_i2c_read_retry(struct efx_i2c_interface *i2c, - u8 device_id, u8 offset, u8 *data, unsigned int len); - -extern int efx_i2c_write_retry(struct efx_i2c_interface *i2c, - u8 device_id, u8 offset, - const u8 *data, unsigned int len); - -#endif /* EFX_I2C_DIRECT_H */ diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h index 5e20e7551dae..d803b86c647c 100644 --- a/drivers/net/sfc/net_driver.h +++ b/drivers/net/sfc/net_driver.h @@ -26,10 +26,10 @@ #include <linux/highmem.h> #include <linux/workqueue.h> #include <linux/inet_lro.h> +#include <linux/i2c.h> #include "enum.h" #include "bitfield.h" -#include "i2c-direct.h" #define EFX_MAX_LRO_DESCRIPTORS 8 #define EFX_MAX_LRO_AGGR MAX_SKB_FRAGS @@ -418,7 +418,10 @@ struct efx_blinker { * @init_leds: Sets up board LEDs * @set_fault_led: Turns the fault LED on or off * @blink: Starts/stops blinking + * @fini: Cleanup function * @blinker: used to blink LEDs in software + * @hwmon_client: I2C client for hardware monitor + * @ioexp_client: I2C client for power/port control */ struct efx_board { int type; @@ -431,7 +434,9 @@ struct efx_board { int (*init_leds)(struct efx_nic *efx); void (*set_fault_led) (struct efx_nic *efx, int state); void (*blink) (struct efx_nic *efx, int start); + void (*fini) (struct efx_nic *nic); struct efx_blinker blinker; + struct i2c_client *hwmon_client, *ioexp_client; }; #define STRING_TABLE_LOOKUP(val, member) \ @@ -618,7 +623,7 @@ union efx_multicast_hash { * @membase: Memory BAR value * @biu_lock: BIU (bus interface unit) lock * @interrupt_mode: Interrupt mode - * @i2c: I2C interface + * @i2c_adap: I2C adapter * @board_info: Board-level information * @state: Device state flag. Serialised by the rtnl_lock. * @reset_pending: Pending reset method (normally RESET_TYPE_NONE) @@ -686,7 +691,7 @@ struct efx_nic { spinlock_t biu_lock; enum efx_int_mode interrupt_mode; - struct efx_i2c_interface i2c; + struct i2c_adapter i2c_adap; struct efx_board board_info; enum nic_state state; diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c index 66a0d1442aba..b27849523990 100644 --- a/drivers/net/sfc/sfe4001.c +++ b/drivers/net/sfc/sfe4001.c @@ -106,28 +106,27 @@ static const u8 xgphy_max_temperature = 90; -void sfe4001_poweroff(struct efx_nic *efx) +static void sfe4001_poweroff(struct efx_nic *efx) { - struct efx_i2c_interface *i2c = &efx->i2c; + struct i2c_client *ioexp_client = efx->board_info.ioexp_client; + struct i2c_client *hwmon_client = efx->board_info.hwmon_client; - u8 cfg, out, in; + /* Turn off all power rails and disable outputs */ + i2c_smbus_write_byte_data(ioexp_client, P0_OUT, 0xff); + i2c_smbus_write_byte_data(ioexp_client, P1_CONFIG, 0xff); + i2c_smbus_write_byte_data(ioexp_client, P0_CONFIG, 0xff); - EFX_INFO(efx, "%s\n", __func__); - - /* Turn off all power rails */ - out = 0xff; - efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1); - - /* Disable port 1 outputs on IO expander */ - cfg = 0xff; - efx_i2c_write(i2c, PCA9539, P1_CONFIG, &cfg, 1); + /* Clear any over-temperature alert */ + i2c_smbus_read_byte_data(hwmon_client, RSL); +} - /* Disable port 0 outputs on IO expander */ - cfg = 0xff; - efx_i2c_write(i2c, PCA9539, P0_CONFIG, &cfg, 1); +static void sfe4001_fini(struct efx_nic *efx) +{ + EFX_INFO(efx, "%s\n", __func__); - /* Clear any over-temperature alert */ - efx_i2c_read(i2c, MAX6647, RSL, &in, 1); + sfe4001_poweroff(efx); + i2c_unregister_device(efx->board_info.ioexp_client); + i2c_unregister_device(efx->board_info.hwmon_client); } /* The P0_EN_3V3X line on SFE4001 boards (from A2 onward) is connected @@ -143,14 +142,26 @@ MODULE_PARM_DESC(phy_flash_cfg, * be turned on before the PHY can be used. * Context: Process context, rtnl lock held */ -int sfe4001_poweron(struct efx_nic *efx) +int sfe4001_init(struct efx_nic *efx) { - struct efx_i2c_interface *i2c = &efx->i2c; + struct i2c_client *hwmon_client, *ioexp_client; unsigned int count; int rc; - u8 out, in, cfg; + u8 out; efx_dword_t reg; + hwmon_client = i2c_new_dummy(&efx->i2c_adap, MAX6647); + if (!hwmon_client) + return -EIO; + efx->board_info.hwmon_client = hwmon_client; + + ioexp_client = i2c_new_dummy(&efx->i2c_adap, PCA9539); + if (!ioexp_client) { + rc = -EIO; + goto fail_hwmon; + } + efx->board_info.ioexp_client = ioexp_client; + /* 10Xpress has fixed-function LED pins, so there is no board-specific * blink code. */ efx->board_info.blink = tenxpress_phy_blink; @@ -166,44 +177,45 @@ int sfe4001_poweron(struct efx_nic *efx) falcon_xmac_writel(efx, ®, XX_PWR_RST_REG_MAC); udelay(10); + efx->board_info.fini = sfe4001_fini; + /* Set DSP over-temperature alert threshold */ EFX_INFO(efx, "DSP cut-out at %dC\n", xgphy_max_temperature); - rc = efx_i2c_write(i2c, MAX6647, WLHO, - &xgphy_max_temperature, 1); + rc = i2c_smbus_write_byte_data(hwmon_client, WLHO, + xgphy_max_temperature); if (rc) - goto fail1; + goto fail_ioexp; /* Read it back and verify */ - rc = efx_i2c_read(i2c, MAX6647, RLHN, &in, 1); - if (rc) - goto fail1; - if (in != xgphy_max_temperature) { + rc = i2c_smbus_read_byte_data(hwmon_client, RLHN); + if (rc < 0) + goto fail_ioexp; + if (rc != xgphy_max_temperature) { rc = -EFAULT; - goto fail1; + goto fail_ioexp; } /* Clear any previous over-temperature alert */ - rc = efx_i2c_read(i2c, MAX6647, RSL, &in, 1); - if (rc) - goto fail1; + rc = i2c_smbus_read_byte_data(hwmon_client, RSL); + if (rc < 0) + goto fail_ioexp; /* Enable port 0 and port 1 outputs on IO expander */ - cfg = 0x00; - rc = efx_i2c_write(i2c, PCA9539, P0_CONFIG, &cfg, 1); + rc = i2c_smbus_write_byte_data(ioexp_client, P0_CONFIG, 0x00); if (rc) - goto fail1; - cfg = 0xff & ~(1 << P1_SPARE_LBN); - rc = efx_i2c_write(i2c, PCA9539, P1_CONFIG, &cfg, 1); + goto fail_ioexp; + rc = i2c_smbus_write_byte_data(ioexp_client, P1_CONFIG, + 0xff & ~(1 << P1_SPARE_LBN)); if (rc) - goto fail2; + goto fail_on; /* Turn all power off then wait 1 sec. This ensures PHY is reset */ out = 0xff & ~((0 << P0_EN_1V2_LBN) | (0 << P0_EN_2V5_LBN) | (0 << P0_EN_3V3X_LBN) | (0 << P0_EN_5V_LBN) | (0 << P0_EN_1V0X_LBN)); - rc = efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1); + rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out); if (rc) - goto fail3; + goto fail_on; schedule_timeout_uninterruptible(HZ); count = 0; @@ -215,26 +227,26 @@ int sfe4001_poweron(struct efx_nic *efx) if (sfe4001_phy_flash_cfg) out |= 1 << P0_EN_3V3X_LBN; - rc = efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1); + rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out); if (rc) - goto fail3; + goto fail_on; msleep(10); /* Turn on 1V power rail */ out &= ~(1 << P0_EN_1V0X_LBN); - rc = efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1); + rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out); if (rc) - goto fail3; + goto fail_on; EFX_INFO(efx, "waiting for power (attempt %d)...\n", count); schedule_timeout_uninterruptible(HZ); /* Check DSP is powered */ - rc = efx_i2c_read(i2c, PCA9539, P1_IN, &in, 1); - if (rc) - goto fail3; - if (in & (1 << P1_AFE_PWD_LBN)) + rc = i2c_smbus_read_byte_data(ioexp_client, P1_IN); + if (rc < 0) + goto fail_on; + if (rc & (1 << P1_AFE_PWD_LBN)) goto done; /* DSP doesn't look powered in flash config mode */ @@ -244,23 +256,17 @@ int sfe4001_poweron(struct efx_nic *efx) EFX_INFO(efx, "timed out waiting for power\n"); rc = -ETIMEDOUT; - goto fail3; + goto fail_on; done: EFX_INFO(efx, "PHY is powered on\n"); return 0; -fail3: - /* Turn off all power rails */ - out = 0xff; - efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1); - /* Disable port 1 outputs on IO expander */ - out = 0xff; - efx_i2c_write(i2c, PCA9539, P1_CONFIG, &out, 1); -fail2: - /* Disable port 0 outputs on IO expander */ - out = 0xff; - efx_i2c_write(i2c, PCA9539, P0_CONFIG, &out, 1); -fail1: +fail_on: + sfe4001_poweroff(efx); +fail_ioexp: + i2c_unregister_device(ioexp_client); +fail_hwmon: + i2c_unregister_device(hwmon_client); return rc; } |